HT4718 I upgraded to Mavericks and my mail application does not load and give an error screen.

Mail application does not work after upgrade to Mavericks.

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter the name of the crashed application or process in the Filter text field. Select the messages from the time of the last crash, if any. Copy them to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
In the Console window, look under User Diagnostic Reports (not "Diagnostic and Usage Messages") for crash reports related to the crashed process. The report name starts with the name of the process, and ends with ".crash". Select the most recent report and post the entire contents — again, the text, not a screenshot. In the interest of privacy, I suggest that, before posting, you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if it’s present (it may not be.) Please don’t post other kinds of diagnostic report — they're very long and not helpful.

Similar Messages

  • My mail system does not load image automatically

    my mail system does not load image automatically. how does that happen? what should i do to set the image load configuration?

    Although you can configure Mail to load HTML images automatically, you should think twice about doing it. The sender of the message could determine your email address, your IP address, and when you opened his message. Not what you want if you get spam, as most people do.

  • Mail application does not respond even after forcing quit over and over

    My mail application is not responding. I have forced quit at least 5 times and I still get the beach ball. This just started happening 2 days ago and now I can't access my mail at all.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Mail content does not load

    iPhone 4S with 7.0.4 occasionally the body of an email does not load. It's as if the email is blank. When the email has NOT been opened, the initial body (I'm set to 2 lines) displays perfectly. When the email is actually opened, nothing appears except the header ("from" and "to").

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Since you are new to iPad .....
    You can download a complete iPad User Guide here: http://manuals.info.apple.com/en/ipad_user_guide.pdf
    Also, Good Instructions http://www.tcgeeks.com/how-to-use-ipad-2/
    Apple - iPad - Guided Tours
    http://www.apple.com/ipad/videos/
    Watch the videos see all the amazing iPad apps in action. Learn how to use FaceTime, Mail, Safari, Videos, Maps, iBooks, App Store, and more.
    How to - Articles & User Guides & Tutorials
    http://www.iphone-mac.com/index.php/Index/howto/id/4/type/select
    iPad How-Tos  http://ipod.about.com/lr/ipad_how-tos/903396/1/
    You can download this guide to your iPad.
    iPad User Guide for iOS 5
    http://itunes.apple.com/us/book/ipad-user-guide-for-ios-5/id470308101?mt=11
     Cheers, Tom

  • HT4623 I updated to iOS 6.1, now the mail application will not load. My settings for each email account are still in there, I have synched several times, and rebooted several times. Sill nothing. Why is there no support for upgrade issues ??

    I refuse to pay for support for an issue caused by an upgrade. That is just ridiculous.

    I'm having the exact same problem.  When I select an email the mail application pauses for a couple seconds, the screen goes black and then I go to the home screen.  Have you found anything more on this issue?  Didn't have this problem before upgrading to 6.1.

  • Mail content does not load in Apple Mail 10.8.2 using exchange server

    About 10 am this morning Apple Mail stopped working.  Initially, no emails could be sent or received even though connection doctor found nothing wrong with the internet connection.  At 4pm, email would load but with just the sender and the subject - no content will load.  Is anyone else having this problem with Mail?

    http://support.apple.com/kb/ht4889
    Migration from Mac OS X v10.4 Tiger to OS X Lion
    Migration from Mac OS X v10.4 computers to OS X Lion over your Wi-Fi or a wired network is not supported. However, if both Macs are equipped with a FireWire port, you can use Target Disk Mode to transfer your data:
    Verify that both Macs are equipped with a FireWire port. Note that different model Macs may have different FireWire connectors, which will require an appropriate cable, such as FireWire 400 to FireWire 800.
    On the Mac you want to transfer data from, Restart, and immediately hold the T key.
    Wait for the FireWire logo to appear on the screen.  If it does not, restart and try again.
    Connect both Macs via the FireWire cable.
    On the Mac you want to transfer data to, Open the Migration Assistant application.
    Select the option "From another Mac, PC, Time Machine backup, or other disk" and click Continue.
    Select the option "From a Time Machine backup or other disk" and click Continue.
    Select your other Mac's volume, such as "Macintosh HD", from the list, and click Cont
    EDIT: Actually I realize you did follow these directions and if your drive is seen on the new Mac it should work. You're entitled to free Apple support with the new purchase, I'd give them a call.

  • Mail Options does not load

    I'm running Messaging Server, with the information as follows:
    iPlanet Messaging Server 5.2 HotFix 1.12 (built Feb 13 2003)
    libimta.so 5.2 HotFix 1.12 (built 12:53:23, Feb 13 2003)
    SunOS red20 5.8 Generic_117350-02 sun4u sparc SUNW,UltraAX-i2
    After an indeterminate period of time with the webmail client open, the Options page does work anymore. After clicking on the Options tab, the content changes to "Not found."
    At this point in time, the issue can be resolved by simply restarting the mail server, however, a user must first discover that it's not working before the server can be restarted.
    I was wondering if anyone else has encountered this problem or if there is a HotFix available for it?
    Thanks for your time,
    -William Chan

    Thanks for the response Jay,
    This begins to happen for all users, immediately after they login. The messenger server can be running for weeks with no problem, and then this problem occurs. At other times, it can run for a matter of hours before it happens again.
    I don't believe the user's session is timing out and we have had different users login on different computers to test it after we have noticed the options page not loading, and it's the same for all of them.
    There are approximately 3 to 4 hundred webmail users, but definitely not all at the same time. I would estimate that no more than 1.5 dozen would be connecting at the same time. They all use https if that helps.
    Thanks,
    -William

  • Mail application does not import messages after installation of yosemite 10.10

    after installing yosemite 10.10 mail does not start up but gives a message that the mail index is damaged. how do i get it to import my messages and star up again.

    Hello CMK1950,
    The article linked below details a number of steps that can help get your Mac to successfully boot up.
    Mac OS X: Gray screen appears during startup
    http://support.apple.com/en-us/TS2570
    Cheers,
    Allen

  • Mac mail sometimes does not load gmail messages

    Several times a week my mail will not load some messages. Most times it works fine. My iphone always gets the mail. What's up with that?

    When you guys say turn ON and OFF, are you referring to "show in IMAP" checkbox in the "Labels" tab in gmail?  As superwhatever mentioned, Apple initially told me to make sure these are showing so that Mail.app picks them up.  If I uncheck "All Mail" and "Important" wont that just mkae Mail.app skip downloading thosemessages that are in Important and All Mail?  Instead shouldn't Mail.app's "Inbox" be set to also incorporate those message that are in Important and All Mail?  This was so much of a headach for me back when the original problem surface that I just stopped using Mail.app and purchased Mailmate.  Since then though, I'm missing certain key functions that Mail.app has and want to take another stab at resolving this.
    On my iphone it shows that I have 18 unread messages for my company account, while in Mail.app it shows only 2 unread.  The other 16 are found in "Important."  how does this get fixed?

  • Mail Application Does Not Quit Properly

    I have a brand new iMac 20" and a new .Mac account. My son has an older PowerBook G4 and a separate .Mac account of his own. We both experience the same problem on our Macs...
    Sometimes when we use Mail to check our .Mac e-mail after we are done using the program we go to quit the program. Sometimes, not all the time, the program window closes (it disappears from the screen) but the little triangle still stays under the Mail icon and the word Mail stays in bold in the top left-hand corner indicating that the program is still open. It will stay that way for hours if we let it.
    The only way we know to get rid of this is to force quit Mail but we are assuming that is the wrong way and/or does damage. My son's PowerBook is somewhat older, but has barely any e-mails in his account. My iMac is brand new (as is my .Mac account) and has very few e-mails as well.
    What seems to be causing this and how can we fix it? I am unable to shut down my Mac until I force quit Mail... otherwise when I go to shutdown nothing happens.
    Thank you.

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • Mail application will not load

    Fairly often when I search for an email I get a message "Can't load Mail. There was a problem loading the application." This is not acceptable!

    Gordon Hume wrote:
    " This is not acceptable!
    How about some details, guessing isn't very acceptable either.
    Who is your email provider (if not Apple)
    What version of OS X do you have
    What troubleshooting steps have you taken so far (if any)
    Just so you know, we are volunteers giving our time to try and help, not Apple employees.

  • Exchange mail messages does not load

    After being using sucessfuly IPAD with Exchange Outlook anywhere (owa) for more than 6 months messages headers are downloaded but after click to check the message body, it takes a while and message can not be shown. There is any clue?
    Activesync or OWA is working perfectly when using via www.
    Outlook account in laptop also is working fine.
    Best Regards

    I'd first rule out memory issues by following the restart/reset/restore troubleshooting path.  Several users I've worked with that have had delivery issues have fixed it this way. 
    http://support.apple.com/kb/HT1430
    http://support.apple.com/kb/HT1414

  • Mail does not load current emails

    mail application does not load current email.  when i delete messages mail downloads olkder messages, not current or new.

    If it doesn't download new mail, it is possible that you are not connected to the mail server. Try to check if you have internet connection on this phone.
    Good luck.

  • HT3159 Mail app does not open

    My mail application does not open anymore. It appears on the dock, but neither opens, nor does it close. Also, can't get the Mac to shut down, as it says the app is still open.
    What can I do?
    I have OS X 10.6.8 Snow leopard.
    Thank you.

    Hello,
    You can Force Quit an application. Press the keys (at the same time) : command + option + escape
    You will see a window when you can select an application and click Force Quit.
    If that doesn't work, to shut down, press for at least 5 seconds on the power button of your Mac.
    Hope this will help.

  • I just upgraded to Mavericks and I got a box that is title mail upgrade.  I can not close it or get rid of it and it will not allow me to shut down my computer.  Can anyone help

    I just upgraded to Mavericks and a box popped up the the screen that says Mail Upgrade.  It does not have the 3 buttons in the left corner.  How can I get rid of this?  It will not even let me log out of my computer.

    Top gray bar says Mail Upgrade
    Below that
    Cleaning up changes
    Then a blue progress bar that does not move
    Below that
    While you wait, you can read about the new features in Mail  Read More

Maybe you are looking for

  • I'm creating a layered pdf from CS3 v5.0.3 and my layered PDF always has

    a layer called "Guides and Grids". This is not a layer in my InDesign file and doesn't contain any information in the PDF. I've done a few tests thinking that maybe my actual guides were somehow coming over on a new layer from my master page, but thi

  • Relocate additional content in Logic Pro x?

    What do you do if you don't want additional content stored on your system drive?

  • Upgraded to 3.5 now LR runs very very slow??

    Is this just happening to me?  It takes forever to get anything done.  Actually my whole system seems to run slow when LR is running now.  Never had a problem before.  Can I go back to the last version please? 

  • Do I need to buy 2 Windows 2012 R2 Standard Servers

    Hi guys, My question is that, I have been approached by a small Business company that needs a Solution for their System.  So naturally I proposed Windows 2012R2 STD with Open Volume  Licence. What I proposed is 01 Primary File/DC Server and a Back up

  • Importing layered pdfs into Photoshop

    I'm a landscape architect and use Photoshop to colour up my CAD designs. It is a big time saver if I could carry across the separate layer information in my CAD plan to within Photoshop - it would make it much quicker to colour in just the paths, for