Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Please read the information at...
Using and Troubleshooting the Dell Webcam and Dell Webcam Central Software
Locate the execute file (WebcamDell2.exe) buried in...
C:\Program Files (x86)\Dell Webcam\Dell Webcam Central
Right clicked on it, then left click properties, then clicked on the compatibility tab, then changed compatibility from windows XP to Windows Vista SP 2 (the latest one they had).
If your operating system was upgraded to Windows 7, did you install the drivers in the correct order? How to Download and Install Drivers in the Correct Order
Shutdown the computer. Unplug the computer from the wall. Now remove the battery. Press and hold the power button for 30 seconds. Put the
battery back in and start the computer. Did the webcam come back?
If no, start, control panel, devices and printers. Click on add device. Is the webcam listed there?
If you recently reinstalled the operating system, did you use the preferred method? Restoring Your Computer´s Software to the Factory Settings or Restoring Your Dell Computer to Original Factory Installation with Dell DataSafe Local Backup 2.0
Please use Internet Explorer(32-bit) when navigating to My Dell Downloads :: Login. Use the same email address and password you use here. Click on add system.
***Systems purchased befor April 1, 2010 might NOT register with Dell My Downloads***
If system does NOT register after 5 minutes, then contact Dell Tech Support.
If you have XP or a system that will not register, then try using this version of Dell Webcam Central. Once it's installed, then open it, click on the ? , check for software update
Open Dell Webcam Central. In the bottom right corner, make sure the webcam is on Capture mode.
Rick
Hello Rick,
Thanks for trying to help.
Here is the info as requested:-
Host Name: DELLLAPTOP
OS Name: Microsoft Windows 7 Home Premium
OS Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
OS Configuration: Standalone Workstation
OS Build Type: Multiprocessor Free
Registered Owner: Trevor
Registered Organization: Microsoft
Product ID: ?????
Original Install Date: 07/07/2010, 11:46:05
System Boot Time: 24/10/2011, 12:06:27
System Manufacturer: Dell Inc.
System Model: Inspiron 1570
System Type: x64-based PC
Processor(s): 1 Processor(s) Installed.
[01]: Intel64 Family 6 Model 23 Stepping 10 GenuineIntel ~793 Mhz
BIOS Version: Dell Inc. A05, 23/03/2011
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume2
System Locale: en-gb;English (United Kingdom)
Input Locale: en-gb;English (United Kingdom)
Time Zone: (UTC) Dublin, Edinburgh, Lisbon, London
Total Physical Memory: 2,937 MB
Available Physical Memory: 1,399 MB
Virtual Memory: Max Size: 5,872 MB
Virtual Memory: Available: 4,244 MB
Virtual Memory: In Use: 1,628 MB
Page File Location(s): C:\pagefile.sys
Domain: WORKGROUP
Logon Server: \\DELLLAPTOP
Hotfix(s): 71 Hotfix(s) Installed.
[01]: 982861
[02]: KB971033
[03]: KB2305420
[04]: KB2393802
[05]: KB2425227
[06]: KB2475792
[07]: KB2476490
[08]: KB2478662
[09]: KB2479628
[10]: KB2479943
[11]: KB2484033
[12]: KB2485376
[13]: KB2487426
[14]: KB2488113
[15]: KB2491683
[16]: KB2492386
[17]: KB2503658
[18]: KB2503665
[19]: KB2505438
[20]: KB2506014
[21]: KB2506212
[22]: KB2506223
[23]: KB2506928
[24]: KB2507618
[25]: KB2507938
[26]: KB2508272
[27]: KB2508429
[28]: KB2509553
[29]: KB2511250
[30]: KB2511455
[31]: KB2515325
[32]: KB2518869
[33]: KB2522422
[34]: KB2524375
[35]: KB2525694
[36]: KB2529073
[37]: KB2530548
[38]: KB2532531
[39]: KB2533552
[40]: KB2533623
[41]: KB2534366
[42]: KB2536275
[43]: KB2536276
[44]: KB2539635
[45]: KB2541014
[46]: KB2544893
[47]: KB2545698
[48]: KB2547666
[49]: KB2552343
[50]: KB2555917
[51]: KB2556532
[52]: KB2559049
[53]: KB2560656
[54]: KB2562937
[55]: KB2563227
[56]: KB2563894
[57]: KB2564958
[58]: KB2567053
[59]: KB2567680
[60]: KB2570791
[61]: KB2570947
[62]: KB2572077
[63]: KB2579686
[64]: KB2586448
[65]: KB2607712
[66]: KB2616676
[67]: KB958488
[68]: KB976002
[69]: KB976902
[70]: KB976932
[71]: KB982018
Network Card(s): 4 NIC(s) Installed.
[01]: Realtek PCIe GBE Family Controller
Connection Name: Local Area Connection
Status: Media disconnected
[02]: Intel(R) WiFi Link 5100 AGN
Connection Name: Wireless Network Connection
DHCP Enabled: Yes
DHCP Server: 192.168.1.254
IP address(es)
[01]: ????
[02]: ????
[03]: Microsoft Virtual WiFi Miniport Adapter
Connection Name: Wireless Network Connection 2
Status: Media disconnected
[04]: Cisco Systems VPN Adapter for 64-bit Windows
Connection Name: Local Area Connection 2
Status: Hardware not present
Hope that this will help.
Thanks again
Regards
Trevor
Similar Messages
-
With Ajay Kumar and Telmo Pereira
Welcome to the Cisco Support Community Ask the Expert conversation. This is an opportunity to learn and ask questions about configuration and troubleshooting the Cisco Application Control Engine (ACE) load balancer with Cisco expert Ajay Kumar and Telmo Pereira. The Cisco ACE Application Control Engine Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers is a next-generation load-balancing and application-delivery solution. A member of the Cisco family of Data Center 3.0 solutions, the module: Helps ensure business continuity by increasing application availability Improves business productivity by accelerating application and server performance Reduces data center power, space, and cooling needs through a virtualized architecture Helps lower operational costs associated with application provisioning and scaling
Ajay Kumar is a customer support engineer in the Cisco Technical Assistance Center in Brussels, covering content delivery network technologies including Cisco Application Control Engine, Cisco Wide Area Application Services, Cisco Content Switching Module, Cisco Content Services Switches, and others. He has been with Cisco for more than four years, working with major customers to help resolve their issues related to content products. He holds DCASI and VCP certifications.
Telmo Pereira is a customer support engineer in the Cisco Technical Assistance Center in Brussels, where he covers all Cisco content delivery network technologies including Cisco Application Control Engine (ACE), Cisco Wide Area Application Services (WAAS), and Digital Media Suite. He has worked with multiple customers around the globe, helping them solve interesting and often highly complex issues. Pereira has worked in the networking field for more than 7 years. He holds a computer science degree as well as multiple certifications including CCNP, DCASI, DCUCI, and VCP
Remember to use the rating system to let Ajay know if you have received an adequate response.
Ajay and Telmo might not be able to answer each question due to the volume expected during this event. Remember that you can continue the conversation on the Data Center sub-community discussion forum Application Networking shortly after the event.
This event lasts through July 26, 2013. Visit this forum often to view responses to your questions and the questions of other community members.Hello Krzysztof,
Another set of good/interesting questions posted. Thanks!
I will try to clarify your doubts.
In the output below both resources (proxy-connections and ssl-connections rate) are configured with a min percentage of resources (column Min), while 'Max' is set to equal to the min.
ACE/Context# show resource usage
Allocation
Resource Current Peak Min Max Denied
-- outputs omitted for brevity --
proxy-connections 0 16358 16358 16358 17872
ssl-connections rate 0 626 626 626 23204
Most columns are self explanatory, 'Current' is current usage, 'Peak' is the maximum value reached, and the most important counter to monitor 'Denied' represents the amount of packets denied/dropped due to exceeding the configured limits.
On the resources themselves, Proxy-connections is simply the amount of proxied connections, in other words all connections handled at layer 7 (SSL connections are proxied, as are any connections with layer 7 load balance policies, or inspection).
So in this particular case for the proxy-connections we see that Peak is equal to the Max allocated, and as we have denies we can conclude that you have surpassed the limits for this resource. We see there were 17872 connections dropped due to that.
ssl-connections rate should be read in the same manner, however all values for this resource are in bytes/s, except for Denied counter, that is simply the amount of packets that were dropped due to exceeding this resource.
For your particular tests you have allocated a min percentage and set max equal to min, this way you make sure that this context will not use any other additional resources.
If you had set the max to unlimited during resource allocation, ACE would be allowed to use additional resources on top of those guaranteed, if those resources were available.
This might sound a great idea, but resource planning on ACE should be done carefully to avoid any sort of oversubscription, specially if you have business critical contexts.
We have a good reference for ACE resource planning that contains also description of all resources (this will help to understand the output better):
http://www.cisco.com/en/US/docs/interfaces_modules/services_modules/ace/v3.00_A2/configuration/virtualization/guide/config.html#wp1008224
1) When a resource is utilized to its maximum limit, the ACE denies additional requests made by any context for that resource. In other words, the action is to Drop. ACE should in theory silently drop (No RST is sent back to the client). So unless we changed something on the code, this is what you should see.
To give more context, seeing resets with SSL connections is not necessarily synonym of drops. As it is usual to see them during normal transactions.
For instance Microsoft servers are usually ungracefully terminating SSL connections with RESET. Also when there is renegotiation during an SSL transaction you may see RESETS, but this will pass unnoticed for end users.
2) ACE will simply drop/ignore new connections when we reach the maximum amount of proxied connections for that context. Exisiting connections will continue there.
As ACE doesn't respond back, client would simply retransmit, and if he is lucky maybe in the next attempt he will be able to establish the connection.
To overcome the denies, you will definitely have to increase the resource allocation. This of course, assuming you are not reaching any physical limit of the box.
As mentioned setting max as unlimited might work for you, assuming there are a lot of unused resources on the box.
3) If a new connection comes in with a sticky value, that matches the sticky entry of a real server, which is already in MAXCONNS state, then both the ACE module/appliance should reject the connection and that sticky entry would be removed.
The client would at that point reestablish a new connection and ACE would associate a new sticky entry with the flow for a new RSERVER after the loadbalancing decision.
I hope this makes things clearer! Uff...
Regards,
Telmo -
Installing and troubleshooting the Telstra 24x7 App for Blackberry
Installing the app
Click on the BlackBerry World™ icon and then search for Telstra 24x7
Click on Install to start the process. The App is provided subject to its own End User Terms
Click Accept & download
Click on the icon once the app has finished installing to launch the app. The App has been designed specifically for use with BlackBerry smartphones running operating system 10 (OS 10). As of July 2013, the models available that will work with the app are the BlackBerry Z10 and BlackBerry Q10.
Troubleshooting
To access the full features of the app, you are required to log in using your My Account.
You can use the app without logging in to My Account; however the application will have limited functionality. If you've skipped the My Account log in - you are still able to log in by following these steps:
Select the Settings icon (two cogs) from the menu screen
Select Manage services, provide username/password in My Account login panel
Select Connect to My Account
If you have trouble logging in:
You'll need to either be connected to 3G or Wi-Fi - check that you can browse to a website
There may be technical issues connecting to Telstra systems to obtain data - if this happens, wait a few minutes then try again
Make sure your Username and Password are correct. If you forget either of these, go to the My Account login page and follow the instructions to reset your Password or retrieve your Username
If you receive an account restriction error message
You aren't a Legal Lessee, Full Authority, or Limited Authority on the account. Only these account holders can access the account functionalities of the App OR
You're a Telstra Business or Enterprise and Government customer. Telstra 24x7 App currently only supports Telstra Consumer customers
If the app can't connect to My Account
Ensure your data connection is enabled, either via 3G or Wi-Fi. Please note that if you connect via 3G on a Telstra service without logging into the App, we may be able to automatically retrieve some service details about your device, but not all functionality.
There may be a high volume of users - wait a few minutes then try again.
Note: You will not be able to register for My Account within the app. This feature is currently not supported in the application. However, to create your account, navigate to the My Account registration page from your computer or laptop.
Usage not displaying
Telstra 24x7 App is unmetered for mobile data usage within Australia when on the Telstra network with the following exceptions:
Store Locator with map view set on
Help and Support - Using 24/7 Support on Twitter
Help and Support - Accessing 24/7 Support on Facebook
Standard data charges will apply when downloading the app from BlackBerry® World™
Note: Standard International Roaming charges to access data through a mobile internet connection will apply when roaming overseas.
Estimated usage will be shown in the same display format as mobile services and will appear for select Telstra broadband services.
You will be unable to see 'My Usage' data for all My Services at this stage. We currently only support usage information for Pre-Paid mobile services, mobile services on a plan and select broadband services.
The app may not be able to update your usage details for a number of reasons:
There may be technical issues connecting to Telstra systems - if this happens, wait a few minutes then try again
You may not be logged into My Account. Check by going to Settings then Select Manage services
You might not be connected to the internet, try opening Safari and visiting a website.
At this stage only newer and select BigPond then Internet services are supported.
Why are my recent charges on the app different to what I can see online?
The recent charges on the app is different to what is displayed online in order to help you gauge your current, pre-bill estimated usage. The final list of charges will appear on your bill.
Bill summaries may not be displayed for a number of reasons:
The app currently only displays a summary of your current bill and 7 months prior. All previous bills are accessible via theTelstra My Account website. To further drill into your bill details and information, please visit Telstra's My Account website to view your itemised bill. Service details are the Telstra services associated to the bill you are currently viewing.
A bill may net yet have been issued
There may be technical issues connecting to Telstra systems to obtain data - if this happens, wait a few minutes then try again
You might not be logged into 'My Account'. You can check if you're logged in by viewing Settings then Manage Services. If you skipped the 'My Account' registration, the app may be able to display limited usage and service details, but you will not be able to view bill summaries
You might not be connected to the internet, try opening Safari and visiting a website
The app may be unable to update your bill information for a number of reasons:
There might be technical issues connecting to Telstra systems to obtain data - if this happens, wait a few minutes then try again
You might not be logged into 'My Account'. You can check if you're logged in by viewing Settings then Manage Services. If you skipped the My Account registration, the app may be able to display limited usage and service details, however you will not be able to view bill summaries
You might not be connected to the internet, try opening Safari and visiting a website
Bills can be paid via the app, and all payments will occur within the Telstra 24x7 App and you'll have access to a stored payment method.
You can choose to receive bills via email through the My Bills screen. When viewing the bill history, click the email icon in the top right hand corner of the screen. You will be prompted to review and accept the terms and conditions, once accepted you are required to enter and confirm your email address. Once registered to receive a bill via email, you can edit the email address via the App. This is achieved by following the same process as to register - the option to edit the email address will be presented to you in the app. If you want to change back to paper bill, you'll need to log into your My Account from T.com to change back to receiving paper bills.
My Services not displaying
You can add your Pre-Paid service to your My Account via a computer to ensure it's displayed.
The difference between My Usage and My Services
My Services provides a full list of your accounts and services linked to your My Account profile.
My Usage provides a list of your mobile and select internet services which have associated usage information.
The Telstra 24x7 application only shows the following services:
Service details associated with your My Account user profile
Service details for the current device you're using if you haven't logged into the app
New services may take up to 48 hours before they appear.
At this time, services are not able to be added within the app. To add and view a service within the app, you'll need to login to My Account or you can us on 13 22 00 anytime.
The app might be unable to update your list of services for a number of reasons:
There may be technical issues connecting to Telstra systems to obtain data if this occurs, please wait a few minutes then try again
You might not be logged into My Account. You can check if you're logged in by viewing Settings then Manage services
You might not be connected to the internet, try opening Safari and visiting a website
Pre-Paid recharge
Recharge is currently only available for your Pre-Paid services associated with the My Account login you're using or the device you're using if you are a Telstra mobile customer connected via 3G.
Tap Recharge within the side bar to view the Pre-Paid services available to recharge. You can then recharge the following ways:
Within the App by using a stored credit/debit card associated with your Pre-Paid service. Simply select the recharge amount, tap continue, and then enter your recharge PIN. If there is no stored card found, you will be presented with the option to recharge in Safari.
Using a voucher - simply enter the 12 digit authorisation number and tap continue
Online, via SMS, Facebook® and my phone
When you recharge online you're provided with an option to store the card details along with your account. You'll also need to set a PIN for your credit card. Once this step is completed, you'll be able to access the stored card with the app and recharge using your PIN.
Your PIN is associated with the stored credit/debit card on your Pre-Paid service. Recharge online to store a credit card against your Pre-Paid service. Note: You must be connected via 3G.
There are a number of reasons why your recharge might be failing:
You have provided an invalid PIN
Technical issues connecting to Telstra systems to complete recharge - wait a few minutes then try again
You have failed to provide the correct PIN 3 times
You only have 3 attempts at providing your PIN. After you've failed 3 times, your stored card details will be deleted and you'll need to add it to your account again by recharging online.
Your account may be suspended due to multiple failed recharge attempts.
Plus Packs
Click on the View Bonuses and Plus Packs to view the amount of bonuses and plus packs remaining as well as the expiry that's associated to your current Pre-Paid mobile number. You'll need to recharge your Pre-Paid service and the amount of bonuses that you'll receive is dependent on your recharge amount.Re: Installing and troubleshooting the Telstra 24x7 App for Blackberry
I have personally phoned Telstra to advise I continue to receive an account for someone else. It has happened again to day. Please check you records and make sure I no longer receive any accounts for 2000133289692. This is not my account. L. Service. -
Error while adding a used relationship between the New DC and the Web DC
Hi Gurus
We are getting the Error in NWDS while Adding a used relationship between the New DC and the Web DC.
Steps what we are Done
1. Create the custom project from inactiveDC's
2.creating the project for the component crm/b2b in SHRAPP_1
3.After that we changed the application.xml and given the contect path.
4.Then we tried to add Dependency to the custom create DC we are getting the error saying that illegal deppendency : the compartment sap.com_CUSTCRMPRJ_1 of DC sap.com/home/b2b_xyz(sap.com.CUSTCRMPRJ_1) must explicitly use compartment sap.com_SAP-SHRWEB_1 of DC sap.com/crm/isa/ like that it was throwing the error.
so, we skip this step and tried to create the build then it is saying that build is failed..
Please help us in this regard.
Awaiting for ur quick response...
Regards
SatishHi
Please Ignore my above message.
Thanks for ur Response.
After ur valuble inputs we have added the required dependencies and sucessfully created the projects, then building of the projects was also sucessfully done and EAR file was created.
We need to deploy this EAR file in CRM Application Server by using the interface NWDI.
For Deploying the EAR into NWDI, we need to check-in the activites what i have created for EAR. once i check-in the activites ,the NWDI will deploy the EAR into CRM Application Server.
In the Activity Log we are able to check the Activities as Suceeded but the Deployment column is not showing any status.
When i right click on my activity Id the deployment summery is also disabled.
So finally my Question is that where can i get the deployment log file, and where can i check the deployment status for my application..
Any pointers in this regard would be of great help..
Awaiting for ur valuble Responses..
Regards
Satish -
Good Morning. I'm having a problem using both my Photoshop elements and premiere programs. I've installed the programs, redeemed my code and entered the serial numbers, and created the adobe log-in. I am able to open up the organizer without problems, but when I try to open up the photo editor (either by trying to open up the program from the main menu, or right-clicking on a photo in the organizer to edit in elements), the program asks me to sign in to adobe (which I can do and it doesn't give an an "incorrect password" or log-in ID error) then accept the terms and conditions. When I click to accept the terms and conditions, nothing happens and the editor fails to open. Everytime I click on the program, I get this same "loop" of signing in and accepting T&C's, but the program fails to open. Any advice?
Premiere Elements 10 is now 64 bit, but not PSE10.
Take a look at your scratch disk set-up and if you have a spare volume, allocate that first before the C drive. Elements use scratch disks when it gets low on RAM.
Click image to enlarge
Turn off face recognition and the auto-analyzer to improve performance.
When editing photos or videos check the task manager to see what background processes may be running and end them temporarily if not needed. -
I used to have the iPhoto application and for some reason it is now gone. Do I have to pay 14.99 in order for me to be able to have it again or is there a way I can get it back. I have a MacBook pro 10.9.5 .
Depends on what you had
If you had iPhoto version 9.5.1 then you can reinstall from the app store under purchases
If you had any version of iPhoto '11 then you can install for free from the App store
If you had any earlier version of iPhoto (iPhoto '09 version 8.x.x) or older then you need to purchase iPhoto '11 version 9.x.x from the app store
If you had iPhoto '08 (version 7.x.x) or older then you also need to download and run the iPhoto library upgraded prior to launching the new iPhoto
LN -
have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.
Hello graingers45,
graingers45 wrote:
have IPod classic that I have been extremely happy with. I now have purchased ipod nano and Iphone. the older version and the new 2.2 are not compatiable. I want to use all my IPods and Iphone, but I only have my one computer, how can I update all of my Apple products. I want to use them all.
What do you mean it isn't' compatible? What isn't compatible?
There is no limit to the number of iPods you can sync to one computer, iTunes library, or iTunes account. Simply connect each separate iPod/iPhone to your computer and configure each to sync whatever content you wish to.
B-rock -
hi
I own an account on iTunes two years ago, almost always used it two days ago, the account stops working do not know why when I open the account Italpin reset your password and resend the email to and I did not receive any Klnh aftermarket tried a lot and Amaisalna something please helpCHANGING APPLE ID/EDIT ACCOUNT INFORMATION/CHANGE ITUNES COUNTRY
Tap Settings / iTunes & App Stores, then tap the Apple ID signed in. Sign out of the current Apple ID account and then sign in with another account or create a new Apple ID http://support.apple.com/kb/HT2731?viewlocale=en_US
To edit account information tap Settings / iTunes & App Stores / Apple ID: / View Apple ID
To change your iTunes Store country, sign in to the account for the iTunes Store region you would like to use, tap Settings/iTunes & App Store/Apple ID/View Apple ID/Country/Region
Read this article for information http://support.apple.com/kb/HT1311 -
After use, I shut the screen down and now a red light is flashing where the sleep indicator is, when I open the computer up it asks for a password, but my computer doesn't have a lock on it?
Regarding your new Guest Account.
If it is the Guest User created by Find My Mac, it is advisable that you leave it be in order to maintain the functionality of the Find My Mac system. It is not a typical guest account. A person can't use the account to log into the system. It only permits the user (presumably a thief) to use a crippled version of Safari, in which the thief will reveal his/her location, hopefully to an end result wherein you may be able to recover the stolen computer.
The very nature of this unique guest account is to increase the security of the system, not to degrade it as a typical guest account might do. -
Hi; I lost my iPhone4!!! How can i block the device so it can´t be used to see the important notes and contacts inside???
You cannot unless you had find my iphone activated on the iphone before it was lost.
MobileMe: Find My iPhone overview -
Will I have any trouble using tmobile on the 4s? And do I go to tmobile to get it working?
Will I have any trouble using tmobile on the 4s? And do I go to tmobile to get it working?
you will get "regular" texting (SMS), but not MMS, which is texting with multimedia like pictures.
T-Mobile is not fully compatible with the iPhone which is why many of the features that make the iPhone so popular (Visual Voicemail, FaceTime, MMS) will not work. There are at least 3 major carriers in the US that support the iPhone. Why you chose the only major carrier that is incompatible is beyond me. -
I have 5s and it shuts off and shows the apple sign and the goes back to normal?
I have 5s and it shuts off and shows the apple sign and the goes back to normal/Help please
Hello mpd412,
Thank you for the details of the issue you are experiencing with your iPhone 5s. I would be concerned too if my iPhone was unexpectedly powering off. I found an article with steps you can take when you encounter an issue like this. I recommend following the steps below:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
My issue is still not resolved. What do I do next?
Contact Apple Support.
You can find the full article here:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Thank you for using Apple Support Communities.
Best,
Sheila M. -
cannot send or receive yahoo mail or gmail from iPhone . installed ios 6 recently. tried rebooting the phone and deleting the email account and adding again but nothing works ! can someone suggest a solution?
Not sure about yahoo, but for gmail, I done the following:
Set up using Exchange on iPhone, it'll keep prompting for password. On PC use captcha option, log in to gmail account from PC after completingg captcha option, enter password on iPhone.
See how that goes for gmail, let us know.
Hopefully someone will have fix for yahoo. -
Having arranged some scanned pictures in an album in I-Photo how can I keep them in the order I have chosen when I move the album. They all have the scan date and not the taken date and move to new positions if I move them from one album to another.
Is there any way to re-number them in the order I have chosen so that they can then be sorted by number? The scans are all from pre-digital images that I wish to move to a photobook and I don't want to have to organise them twice!
Thanks for any suggestions.I was a bit short, Chris, sorry. It is limited, what can be posted, when typing on an iPad.
Now I am back on my Mac. I meant the following: Batch Change the date for a large range of photos, that should have a date stepped in increments.
Select all Photos at once and use the command "Photos > Batch Change".
Then set the date for the first photo and select an increment, e.g. one minute.
Now all photos will get a new date assigned, incremented by one minute, in the sequence you have selected. So you will be able to sort them by date. This way it will be unnecessary to change the titles or filenames. -
How can I read the bootstrap files and extract the fragment-URLs and fragment-numbers in plain text?
How can I read the bootstrap files of any HDS Live stream and extract the fragment-URLs and fragment-numbers in plain text?
Could it be that it is some kind of compressed format in the bootstrap? Can I uncompress it wirh f4fpackager.exe? Could not find any download for f4fpackager.exe. I would prefere less code to do so. Is there something in Java of JavaScript, that can extract the fragment-numbers?
Thank you!Doesn't sound too hard to me. Your class User (the convention says to capitalize class names) will have an ArrayList or Vector in it to represent the queue, and a method to store a Packet object into the List. An array or ArrayList or Vector will hold the 10 user objects. You will find the right user object from packet.user_id and call the method.
Please try to write some code yourself. You won't learn anything from having someone else write it for you. Look at sample code using ArrayList and Vector, there's plenty out there. Post in the forum again if your code turns out not to behave.
Maybe you are looking for
-
Hello, I am using a late 2009 Mac mini with 8gb memory and a 2.53 ghz intel 2 core duo. My final cut pro X projects look fine until i export them. I export using h.264 and the video is choppy but the audio is fine. How do i fix this?
-
Ess wda: updating Iban for insert/copy/modify in bank detail screen for germany
Hi, We are using standard detail screen HRESS_CC_PER_DTL_BANK_DE for Germany, We have observed that even if the user changes/updates/creates the new record without filling Iban field system will not throw any error which is correct as per V_T588MFPRO
-
Advanced Batch Rename using RegEx?
Hi all, I've got hundreds of files to rename, they're all images of vehicles that have been named based on their reg, there are 8 images per vehicle denoted by the number 1-8 immediately after the reg nuber. What I need to do is insert a _ between th
-
WAAS optimisation between different WAAS OS versions
Hi, We are replacing WAAS devices WAVE - 7371 with WAVE - 7541. There are 6 WAAS devices at this location and we have already replaced one of existing 7371 with 7541. The 7541 are running OS 5.0.3 as we are running OS 4.4.7 on WAAS CM and WAAS device
-
I would like to compare two field and then is it's true then the output will be the 2nd one
Hello All, I am doing a mappong where i need to compare two field and then if there are equal the 2nd one should be the output and 2nd value will be using multiple segment. It's for shipment. Regards Rituparna