Variable with proposed value in BEX Query View

Dear SAP-Gurus,
I have a Web Application with some views on one query. In the inital screen i show the popup for entering the global variable values. Now my question; is it possible to give a global variable used filled by exit and used in these queries a proposed value, receeived by user exit?
With normal query this works, but not with a query view.
any suggestions?
kind regards.
Jürgen

Hi,
if anyone has the same problem - you just have to set the parameter variables_clear=x in webtemplate.
same applies to bookmarks, if you want the variables to be filled by your exit.
regards
Jürgen

Similar Messages

Variable with multiple values.

Hi All,
Can anyone help me to create a variable with multiple values like it should accept two Buisness Area AU10,PH10 in Query.As well as how to use this variable in fox using VARV, VARI,and VARC.
Thanx&Rgds,
Indu

Hi,
You can write an exit for variable to retrieve two values.
Usage of this variable in FOX..
TOTALCOUNT= VARC(variable).
COUNT = 1.
DO .
IF COUNT < TOTALCOUNT.
varval = VARI( variable, COUNT ).
COUNT = COUNT + 1.
ENDIF.
Hope this helps.
Regards,
Bindu

Creation of Variable with single values in BPS

Dear All,
I have a very basic requirement in creating variables that would accept single values from the user in BPS.
Could anyone pls provide me the steps in doing so?
I am able to create and use varibles with value ranges but could not find the option to create variables with single values.
Regards,
Srini.

Hi Raj,
I have already been thru SAP help file but, though it says we can create variables with single values, it does not provide any steps in creating it.
Any suggestions?
Regards,
Srinivas Kamireddy.
Edited by: Srinivas Kamireddy on Apr 25, 2008 7:59 PM

Report script - using substitution variable with multiple values

Hi All,
Substitution variable with multiple values is not working correctly with Report scripts. Can you please let me know what is the syntax to assign multiple values to a sub variable using maxl:
alter database samp.samp set variable 'ExtractQuarter' 'Q1,Q2,Q3,Q4';
alter database Samp.Samp set variable 'ExtractQuarter' 'Q1:Q4';
I tried both of the above but they are errored out with the below error:
Error: 1001005 - Unknown Member [Q1:Q4] in Report.
my requirement is different for both Actual and forecast data extract so i would like to make use of this variable to extract whole year data for Forecast and current quarter data for Actual with out duplicating the report scripts for both processes.
Thanks,
PRaveen

Hi,
Please refer following thread,
range of months in report script?
Hope it helps.
Regards

How can I get the variable with the value from Thread Run method?

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
// I should get Inside the run method::: But I get only Inside
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

We want to access a variable from the run method of a
Thread externally in a class or in a method. I presume you mean a member variable of the thread class and not a local variable inside the run() method.
Even
though I make the variable as public /public static, I
could get the value till the end of the run method
only. After that scope of the variable gets lost
resulting to null value in the called method/class..
I find it easier to implement the Runnable interface rather than extending a thread. This allows your class to extend another class (ie if you extend thread you can't extend something else, but if you implement Runnable you have the ability to inherit from something). Here's how I would write it:
public class SampleSynchronisation
public static void main(String[] args)
    SampleSynchronisation app = new SampleSynchronisation();
public SampleSynchronisation()
    MyRunnable runner = new MyRunnable();
    new Thread(runner).start();
    // yield this thread so other thread gets a chance to start
    Thread.yield();
    System.out.println("runner's X = " + runner.getX());
class MyRunnable implements Runnable
    String X = null;
    // this method called from the controlling thread
    public synchronized String getX()
      return X;
    public void run()
      System.out.println("Inside MyRunnable");
      X = "MyRunnable's data";
} // end class MyRunnable
} // end class SampleSynchronisation>
public class SampleSynchronisation
public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run
method "+sathr.x);
// I should get Inside the run method::: But I get
only Inside
class sampleThread extends Thread
public String x="Inside";
public void run()
x+="the run method";
NB: if i write the variable in to a file I am able to
read it from external method. This I dont want to do

How can I get the variable with the value from Thread's run method

We want to access a variable from the run method of a Thread externally in a class or in a method. Even though I make the variable as public /public static, I could get the value till the end of the run method only. After that scope of the variable gets lost resulting to null value in the called method/class..
How can I get the variable with the value?
This is sample code:
public class SampleSynchronisation
     public static void main(String df[])
sampleThread sathr= new sampleThread();
sathr.start();
System.out.println("This is the value from the run method "+sathr.x);
/* I should get:
Inside the run method
But I get only:
Inside*/
class sampleThread extends Thread
     public String x="Inside";
     public void run()
          x+="the run method";
NB: if i write the variable in to a file I am able to read it from external method. This I dont want to do

Your main thread continues to run after the sathr thread is completed, consequently the output is done before the sathr thread has modified the string. You need to make the main thread pause, this will allow sathr time to run to the point where it will modify the string and then you can print it out. Another way would be to lock the object using a synchronized block to stop the main thread accessing the string until the sathr has finished with it.

A variable with multiple values. Is it possible?

Normally, when we need a variable with multiple values we just write them while creating the variable or, if they depend on some other variable selected by the user a variable of type exit is used.
However, this time we would like my user to select a few variable values at a time, i.e years 2005,2006 and 2007. He can change his mind and then select 2007 and 2008. I don't want the user to be forced to select ONLY ONE value. They need to select several values at the same time.
Ideally, I don't want to use a range with values from 2 variables to do that.
Thanks,
Alberto Sabate
Message was edited by: Alberto Sabate

Hello Alberto,
When restricting variables to multiple values you need to use a range. The variable restriction in BPS supports two operators EQ - equals and BT - between.
In your example below however you could use a user exit to support this. The years you have typed in below are sequential and therefore would fit into a range.
Cheers,
Scott

I want to set a variable with default value and can be changed by the user

hi,
i want to set a variable with default value and can be changed by the user, so i new a variable with setting : customer exit, single value, optional, ready for input.
in my customer exit code, i set a default value, eg. 20070530
when the variable screen popup, it display the default value 20070530, i changed it to 20070529, but it doesn't work , it still display the data in 20070530, how can i solve this problem?
your help is appreciated.

Liu,
As mentioned by Anil, you need to restrict your customerr Exit code to I_STEP = 1.
or.
Open your Variable in change mode, in the Last Page os the Variable Maintenance you can provide default value. Note: you are doing same thing in Customer Exit. In your case no need of Customer Exit.
Nagesh Ganisetti.
Assign points if it helps.

Results based on From and To value in Bex query designer.

Dear all,
We are using BI7.00. In one of our report which pertains to PM user wants to get the details of number of breakdowns which falls in the value range 0 to 1 hours.
I created a condition which has 2 variables, one is From value and the other is for the To value (since user wants to enter both the limits). I have written a condition that if the breakdown hour is greater than or equal to variable1 and less than or equal to variable2.
Using the above condition if the query is run, i am not getting the desired output. The values avaialble in the report are 0.65,0.78,1.30,7.38,0 etc., when i give 0 to 1 i should get the values 0.65,0.78 and 0 but instead report displays "No valid results".
I changed the condition and selected "Between" variable 1 and variable 2 - yet no change in the query.
To my knowledge i foresee that system is not able to recognize the decimal and hence provides details only based on the whole numbers.
How to get my requirement achieved in the Bex query designer.
Experts suggestion with steps will be very useful to solve my problem.
Regards,
M.M
Edited by: Magesh Magesh on Dec 26, 2008 11:28 AM

Hi Magesh,
I think you could try one more way.
Create a formula inserting your two formula variables for limits .(FV - are ready for input ) .
The formula would return the result as 1 or 0 because it would have boolean condition in it.
You could then place a condition in the query designer to only show all records where the value of the formula key fig is 1.
You formula A would look like
( KF > FV1) AND (KF < FV2) * 1.
And in the condition put A EQ 1.
You could scale the key figures as well and multiply the limits mentioned by the users in FV1 and FV2 if decimals are still not recognized by SAP.(scaling)
Regards,
Sunmit.

Displaying Customer Exit Variable with derived value from another ODS

Hi All,
Sorry if this question has been answered before. I searched the forums and could not find anything specific to my problem.
I am new to BEx Query. Customer is requesting a variable(s) be created which will be displayed as a column along with other CKF and RKF. This query is a payroll query for US/Canada. This new variable will be based on the user input date for the query. We are to take this date and go look up the actual pay date for the pay period to which the user input date belongs. The pay date is stored in another ODS.
So far, as far as the changes to the Customer Exit ZXRSRU01 are concerned, I would perform the logic when I_STEP = 2. Do a basic selection off the second ODS, derive the pay date, and store in range table E_T_Range.
The data displayed off the user input date is displayed in rows. This is done six times, going back seven days for each row (first row is data for period user entered date to user entered date - 7 days; second row is data for period user entered date - 7 days to user entered date - 14 days; etc ...). For this to happen correctly, I am assuming the variable(s) are to to have characteristic types 'Not ready for input', 'Mandatory', 'Customer Exit', and 'Single Value'.
My question is ... How do I display the six variables in columns (how are they to be defined in the query) and the characteristics I list above, are they correct? Does this need to be a replacement path variable?
Thanks.
Edited by: Amir Hasan on Jun 11, 2009 6:24 PM
Edited by: Amir Hasan on Jun 11, 2009 6:25 PM

Hi Amir,
What i can understand from u r requirement is you want to few columns that will show something like below,
User entered date = x
Period of X to Period of (X-7) Period of X to Period of (X-14).....
This can be done by CMOD for variable only.
Logic steps :
1) Take the user input.
2) Find out the period by using T009B table and store in temp variable.
3) Do day -7 and find out period for the same
4) Assing period of X to ls_range-high range and X-7 to ls_range-low.
Let me know if you have any doubt
Regards,
Viren

How to pass parameter values to Bex query through xcelsius (LO or QWAAS)

Hi,
I have prompt in Bex query and want to pass values to query prompt through xcelsius .
In xcelsius i have selection
e.g 1] Combo selection is for Vendor
2] Combo selection is for Fiscal Year
If i select value from Combo list and refresh the dashboard im getting below error
A database error occured. The database error text is: The MDX query SELECT { [Measures].[4IKKZVYWWD3XKQK7Z1BK34VTL], [Measures].[4IKKZVJJUFWIJHHBND6VJ0YE1], [Measures].[4IKKZV46SIP3I8EFBP26YX0YH], [Measures].[4IKKZUOTQLHOGZBJ00XIET3IX] } ON COLUMNS , NON EMPTY [0CREDITOR].[LEVEL01].MEMBERS ON ROWS FROM [0FIAP_O03/ZFIAP_O03_UNIVERSE] SAP VARIABLES [VN_VAR] INCLUDING A00140 [0S_FYEAR] INCLUDING V3/2010 : V3/2010 failed to execute with the error Unknown error. (WIS 10901)
I have tried using LO and QWAAS but not able to do so......
if any one knows plz help....

Hi,
most likely yo are passing the wrong value.
you need to send the key or the member unique name.
Ingo

BEX Query Views - Reqd in PRD but need to create in Dev - Data Issues

Hello Bw Gurus
BI 7.0 ECC 4.7
We have a BEx Query in BI production which uses a work centre hierarchy. The user wants to create query views on this query to use in BI production.
Our normal transport procedure of a new development object would be BI DEV - QA - PRD
However the DEV environment does not have all the work centres and the data of PRD. So if the query view needs to be created in DEV then we could not set up the view correctly as there is not the workcenters or the data in DEV.
Hopefully that makes sense?
Apart from allowing Query Views to be created in BI PRD directly is there any solution?
Best,
Steve Jones

If you need exact char values for workcenter to create your views you can quickly create the master data (just the values you want) in Dev and use them to create the views...

User entry variable with exclude values

Hello All,
I created a user entry/ default value variable, which allows multiple single values and is optional entry. And I also got to exclude few values from this infoobject as well as have a variable. When I select and exclude my value from selsction and run the report, I get a system error and the varibale is converted to mandatory entry. The detail error message is displayed below. Any useful input will be awarded
Diagnosis
Variable &V1& is used in the query in such a way, that an optional entry is not possible.
For example, you might be using an "Exclude", or the variable might be connected using OR to additional selections for &V2& in the global filter, but is still displayed in the columns selections.
It is also not possible to use an optional parameter variable to fill an interval selection in either the from-field or the to-field.
System response
Procedure
If you are able to accept the mandatory entry, you need not do anything. Otherwise you must work with several variables in the query. You can use an optional interval variable to do this.
Procedure for System Administration

Hello ,
I did try creating a variable with the foll details:
Variable Type : User Entry / Default Value
Variable Represents : Multiple Single values
Variable entry optional
When I run the query it converts my variable to mandotary entry. but I want to have optional user entry variable.
Any help will be awarded

RRI? How to call ITS URL and pass field value from Bex Query.

I am doing RRI from query to webaddress,
i have defined jump(report type: webaddress and reicver report as url) from shopping cart bex query(SRM ) to webaddres.
here url is SRM ITS base link for monitoring shoppingcart(http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN).
jump is working from portal(from bex query ivew).
but i want to pass value(shopping cart value) to above url and want to skip first screen.
i have maintained assignment detail by assigning field name against shopping cart infoobject with type url parameter, but its not directly call reciver url with given input field.
i tried the diffrent combination of url and field assignment as like below:
1: web address url:http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN
assigned field: GS_HEADER-OBJECT_ID
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap/bc/gui/sap/its/bbp_mon_sc?sap-client=200&sap-language=EN?GS_HEADER-OBJECT_ID='selected number value'
2: web address url:http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc
assigned field: flNUQVRFPTgzMTcuMDAyLjAxLjAx
but when we call reciver url from portal bex ivew, only initial screen come with page url as below:
http://(hostname):(SRM port)/sap(cz1TSUQlM2FBTk9OJTNhc3JtZGV2X0lTRF8wMCUzYUdxdFNqdWdMS2xyTEFEelFTNFlWTnJXRjEzdy05UnhTWXl4TW03c3AtQVRU)/bc/gui/sap/its/bbp_mon_sc/~flNUQVRFPTgzMTcuMDAyLjAxLjAx====#jump_to_selected_sc?flNUQVRFPTgzMTcuMDAyLjAxLjAx='selected number value'
I have seen the source code of that url(inital screen and after entring the value to that screen) too.
how to call webadress(SRM ITS base shopping cart URL) with passing the one of field value of that url screen?
Thanks and regards,
Dushyant.

Declare the gv_orderid in modulepool program.
And Declare the parameter as import parameter in smartform.
CALL FUNCTION lv_form
   EXPORTING
*   ARCHIVE_INDEX              =
*   ARCHIVE_INDEX_TAB          =
*   ARCHIVE_PARAMETERS         =
*   CONTROL_PARAMETERS         =
*   MAIL_APPL_OBJ              =
*   MAIL_RECIPIENT             =
*   MAIL_SENDER                =
*   OUTPUT_OPTIONS             =
*   USER_SETTINGS              = 'X'
   i_input                    = gv_orderid
* IMPORTING
*   DOCUMENT_OUTPUT_INFO       =
*   JOB_OUTPUT_INFO            =
*   JOB_OUTPUT_OPTIONS         =
* EXCEPTIONS
*   FORMATTING_ERROR           = 1
*   INTERNAL_ERROR             = 2
*   SEND_ERROR                 = 3
*   USER_CANCELED              = 4
*   OTHERS                     = 5

Bex Query view

Hi Expert,
For my requirement I need to create query view from basic query.In the basic query I have more than 10 chars and some key figure. In the query view i need only 3 char & some keyfigures. I have created a query view with those keyfigures wat I requires but for char how to select only 3 char from 10 chars in the basic query.
Can any body suggest me any thing.
Thanks
Vinod

Hi,
Run the query in BEx Analyzer.
Right click on results -> Select Query Properties.
In the Row/Characterastics section, keep your 3 characterastics and move the remaining 7 characterastics to free char section. and press OK.
Now, you will see the report with key figures for only 3 characterastics..
Save it as a view.
Hope this clarifies.
Best Regards,
Srinivas.

Variable with proposed value in BEX Query View

Similar Messages

Maybe you are looking for