WEBGATES 3.3.2 gcc libraries requirement during the installation problem

Have Linux 5.2, 32 bit machine installing webgates 11.1.13
Oracle requires libgcc_s.so.1 libstdc++.so.5 version 3.3.2 installl
When looking http://gcc.gnu.org/ - they have old vesrion 3 gcc-3.2.tar.bz2 - is it what needs to be used?
When building the compiler libs got an error:
../../lib/gcc-3.2/gcc/read-rtl.c:662: error: invalid lvalue in increment
make[2]: *** [read-rtl.o] Error 1
make[2]: Leaving directory `/home/oracle/software/objlib/gcc'
make[1]: *** [stage1_build] Error 2
make[1]: Leaving directory `/home/oracle/software/objlib/gcc'
make: *** [bootstrap-lean] Error 2
% mkdir objlib
% cd objlib
% ../lib/gcc-3.2/configure --prefix=/home/oracle/software/objlib  target
make CFLAGS='-O' LIBCFLAGS='-g -O2' LIBCXXFLAGS='-g -O2 -fno-implicit-templates' BOOT_CFLAGS='-msoft-float' bootstrap
Any suggestion how come around these libraries will be appreciated.
Thanks in advanve.
Edited by: mc2 on Jun 29, 2011 2:49 PM

Thanks Ramesh. It installed without errors.
But after I created WG instance and went through the post install steps the access to the url http://localhost:7778 - complaint that can't connect to the server.
The logs has errors:
[oracle@localhost ~]$ <Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.agent-default> <BEA-000000> <OAM Server request failed: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/images/favicon.png]>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.agent-default> <BEA-000000> <OAM Server request failed: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/images/favicon.png]>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.agent-default> <BEA-000000> <OAM Server request failed: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/faces/pages/PolicyManager.jspx]>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.agent-default> <OAMAGENT-00409> <Session is no longer valid, re-authenticate: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/images/favicon.png]>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.agent-default> <OAMAGENT-00409> <Session is no longer valid, re-authenticate: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/images/favicon.png]>
<Jul 1, 2011 10:20:50 AM PDT> <Warning> <oracle.oam.agent-default> <OAMAGENT-00409> <Session is no longer valid, re-authenticate: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/faces/pages/PolicyManager.jspx]>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:20:51 AM PDT> <Error> <oracle.oam.proxy.oam> <BEA-000000> <Session invalid as returned by PBL_check_valid_session_response responseEvent fail>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.agent-default> <BEA-000000> <OAM Server request failed: OpCode = 19 [GetSessionInfo], Returned Status = Major code: 71(SessionInvalid) Minor code: 2(NoCode) >
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.agent-default> <OAMAGENT-00406> <Invalid authentication token: INVALID>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.agent-default> <BEA-000000> <OAM Server request failed: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/faces/pages/PolicyManager.jspx]>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.agent-default> <OAMAGENT-00409> <Session is no longer valid, re-authenticate: OpCode = 20 [IsAuthorizedWRefreshAndAudit], Returned Status = Major code: 71(SessionInvalid) Minor code: 72(SessionIdle) , extraInfo = [prefHost:IDMDomain, resource:/oamconsole/faces/pages/PolicyManager.jspx]>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:20:51 AM PDT> <Error> <oracle.oam.proxy.oam> <BEA-000000> <Session invalid as returned by PBL_check_valid_session_response responseEvent fail>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.agent-default> <BEA-000000> <OAM Server request failed: OpCode = 19 [GetSessionInfo], Returned Status = Major code: 71(SessionInvalid) Minor code: 2(NoCode) >
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.agent-default> <OAMAGENT-00406> <Invalid authentication token: INVALID>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:20:51 AM PDT> <Warning> <oracle.oam.controller> <OAM-02055> <Retrieve SSO session operation failed.>
<Jul 1, 2011 10:22:57 AM PDT> <Warning> <oracle.oam.engine.session> <OAMSSA-02015> <Session property null is not serializable or is null. Property will be ignored.>
<Jul 1, 2011 10:23:12 AM PDT> <Warning> <Socket> <BEA-000450> <Socket 17 internal data record unavailable (probable closure due idle timeout), event received 17>

Similar Messages

  • Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

    Trying to install Acrobate 8 Standard on PC with Windows 7, 64 bit. During the installation I was asked to provide "File Adobe PDF.dll for Windows Vista. How can I obtain the required file?

    Nothing in the Acrobat 8.x product family is compatible with Windows 7 (or any contemporary OS).
    The Acrobat 8.x product family passed into End of Support way back -- (November 2011).
    The current release of Acrobat (XI) is compatible in Windows 7.
    Be well...

  • When trying to install an Adobe extention, during the installation process I get a message that says "This extention cannot cannot be installed-----requires version 13.0 or greater."  I am installing from within CC

    When trying to install an Adobe extention, during the installation process I get this message-----"This extention cannot be installed----requires version 13.0 or greater."  I am installing through Photoshop CC------appreciate any help.

    Hi Gary.  Extensions have to be written for the specific Photoshop versions they are designed to run on.and definitely don't all run on every version of Photoshop.  You'd think that you'd be OK with that message, but it might be that it works fine on CS6 (13) but not on CC (14).
    But it could be an error.
    What is the extension you are trying to install?  Is Photoshop, and Extension Manager fully up to date?  If you are sure that the extension runs on CC, I'd try un installing, and reinstalling the Extension Manager.  I have had to exactly that a while back.

  • Hi, can anyone help me because I've been trying to download the iTunes and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..

    Hi, can anyone help me because I've been trying to download the iTunes on my PC ( windows vista ) and everytime I am installing it its says --- An error occured during the installation of assembly Microsoft.VC80.CRT,type,="win32",version,="8.0.50727.6195...etc..Thank you.

    it says that Windows Resource Protection could not start the repair service.
    Okay. We've got a broken Windows Modules Installer on the PC, then.
    It's a bit of an involved fix getting past it, but we've had success here with it in the past.
    First, I'd strongly suggest setting up a system restore point.
    Now try the Scenario III treatment from the following document:
    Windows Update Error 80070424 in Vista
    Head back into Windows Update and attempt to get updates again. If they still fail, this time with an 8000FFFF error code, try the following Microsoft document:
    Windows Update error 8000FFFF
    If you get Windows Updates flowing again, stock up on any you're behind on (restarting the PC when requested to do so). This may take some time and may have to be done in several batches, depending on how far you've fallen behind. Basically, keep going back to Windows Update until it stops offering you new updates.
    After the updates have been installed, restart the PC one more time (in order to ensure that any pending installs requiring a restart have been resolved).
    Now try another iTunes install. Does it go through without the 0x80070424 this time?

  • During the installation of grid infra(cluster) for Oracle 11.2 RAC one.

    Good Day All, and thanks in advance…
    During the installation of grid infrastructure(cluster) for Oracle 11.2 RAC One Node on AIX6.1 ( PROD) , ASM used. I am getting below errors when executing ./root.sh
    Upon investigation ,I managed to get note: 1068212.1 from the support oracle site ( see below for details) . I might be hitting Unpublished bug 8670579. I also logged Severity 2 SR with Oracle support to get the bug/patch fix and no one has attended the call.
    This might be configuration issue or otherwise , if you have experienced the same issue please assist ? ( if you need more logfiles please feel free to request)….
    I ran the Cluster Verify Check – all passed.
    Many Thanks
    Ezekiel Filane
    /u01/app/11.2.0/grid#./root.sh
    Running Oracle 11g root.sh script...
    The following environment variables are set as:
    ORACLE_OWNER= grid
    ORACLE_HOME= /u01/app/11.2.0/grid
    Enter the full pathname of the local bin directory: [usr/local/bin]:
    The file "dbhome" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
    The file "oraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
    The file "coraenv" already exists in /usr/local/bin. Overwrite it? (y/n) [n]:
    Creating /etc/oratab file...
    Entries will be added to the /etc/oratab file as needed by
    Database Configuration Assistant when a database is created
    Finished running generic part of root.sh script.
    Now product-specific root actions will be performed.
    2010-10-19 10:33:11: Parsing the host name
    2010-10-19 10:33:11: Checking for super user privileges
    2010-10-19 10:33:11: User has super user privileges
    Using configuration parameter file: /u01/app/11.2.0/grid/crs/install/crsconfig_params
    Creating trace directory
    User grid has the required capabilities to run CSSD in realtime mode
    LOCAL ADD MODE
    Creating OCR keys for user 'root', privgrp 'system'..
    Operation successful.
    root wallet
    root wallet cert
    root cert export
    peer wallet
    profile reader wallet
    pa wallet
    peer wallet keys
    pa wallet keys
    peer cert request
    pa cert request
    peer cert
    pa cert
    peer root cert TP
    profile reader root cert TP
    pa root cert TP
    peer pa cert TP
    pa peer cert TP
    profile reader pa cert TP
    profile reader peer cert TP
    peer user cert
    pa user cert
    Adding daemon to inittab
    CRS-4123: Oracle High Availability Services has been started.
    ohasd is starting
    CRS-2672: Attempting to start 'ora.gipcd' on 'csgipm'
    CRS-2672: Attempting to start 'ora.mdnsd' on 'csgipm'
    CRS-2676: Start of 'ora.gipcd' on 'csgipm' succeeded
    CRS-2676: Start of 'ora.mdnsd' on 'csgipm' succeeded
    CRS-2672: Attempting to start 'ora.gpnpd' on 'csgipm'
    CRS-2676: Start of 'ora.gpnpd' on 'csgipm' succeeded
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'csgipm'
    CRS-2676: Start of 'ora.cssdmonitor' on 'csgipm' succeeded
    CRS-2672: Attempting to start 'ora.cssd' on 'csgipm'
    CRS-2672: Attempting to start 'ora.diskmon' on 'csgipm'
    CRS-2676: Start of 'ora.diskmon' on 'csgipm' succeeded
    CRS-2676: Start of 'ora.cssd' on 'csgipm' succeeded
    CRS-2672: Attempting to start 'ora.ctssd' on 'csgipm'
    Start action for daemon aborted
    CRS-2674: Start of 'ora.ctssd' on 'csgipm' failed
    CRS-2679: Attempting to clean 'ora.ctssd' on 'csgipm'
    CRS-2681: Clean of 'ora.ctssd' on 'csgipm' succeeded
    CRS-4000: Command Start failed, or completed with errors.
    Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl start resource ora.ctssd -init
    Start of resource "ora.ctssd -init" failed
    Clusterware exclusive mode start of resource ora.ctssd failed
    CRS-2500: Cannot stop resource 'ora.crsd' as it is not running
    CRS-4000: Command Stop failed, or completed with errors.
    Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd -init
    Stop of resource "ora.crsd -init" failed
    Failed to stop CRSD
    CRS-2500: Cannot stop resource 'ora.asm' as it is not running
    CRS-4000: Command Stop failed, or completed with errors.
    Command return code of 1 (256) from command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.asm -init
    Stop of resource "ora.asm -init" failed
    Failed to stop ASM
    CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'csgipm'
    CRS-2677: Stop of 'ora.cssdmonitor' on 'csgipm' succeeded
    CRS-2673: Attempting to stop 'ora.cssd' on 'csgipm'
    CRS-2677: Stop of 'ora.cssd' on 'csgipm' succeeded
    CRS-2673: Attempting to stop 'ora.gpnpd' on 'csgipm'
    CRS-2677: Stop of 'ora.gpnpd' on 'csgipm' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'csgipm'
    CRS-2677: Stop of 'ora.gipcd' on 'csgipm' succeeded
    CRS-2673: Attempting to stop 'ora.mdnsd' on 'csgipm'
    CRS-2677: Stop of 'ora.mdnsd' on 'csgipm' succeeded
    Initial cluster configuration failed. See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_csgipm.log for details
    csgipm:/u01/app/11.2.0/grid#ps -ef | grep pmon
    root 6160492 3932160 0 10:54:13 pts/2 0:00 grep pmon
    more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
    csgipm:/usr/sbin#more /u01/app/11.2.0/grid/log/csgipm/client/ocrconfig_5767204.log
    2010-10-19 10:33:14.435: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
    2010-10-19 10:33:14.435: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
    2010-10-19 10:33:14.435: [  OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
    2010-10-19 10:33:14.435: [  OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
    2010-10-19 10:33:14.435: [  OCRRAW][1]proprinit: Could not open raw device
    2010-10-19 10:33:14.442: [ default][1]a_init:7!: Backend init unsuccessful : [26]
    2010-10-19 10:33:14.461: [ OCRCONF][1]Exporting OCR data to [OCRUPGRADEFILE]
    2010-10-19 10:33:14.461: [  OCRAPI][1]a_init:7!: Backend init unsuccessful : [33]
    2010-10-19 10:33:14.461: [ OCRCONF][1]There was no previous version of OCR. error:[PROCL-33: Oracle Local Registry is not configured]
    2010-10-19 10:33:14.461: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2010-10-19 10:33:14.461: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
    2010-10-19 10:33:14.462: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
    2010-10-19 10:33:14.462: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
    2010-10-19 10:33:14.462: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
    2010-10-19 10:33:14.462: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
    2010-10-19 10:33:14.462: [  OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
    2010-10-19 10:33:14.462: [  OCRRAW][1]proprioini: all disks are not OCR/OLR formatted
    2010-10-19 10:33:14.462: [  OCRRAW][1]proprinit: Could not open raw device
    2010-10-19 10:33:14.462: [ default][1]a_init:7!: Backend init unsuccessful : [26]
    2010-10-19 10:33:14.462: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
    2010-10-19 10:33:14.463: [  OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 1
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 2
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 3
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 4
    2010-10-19 10:33:14.463: [  OCROSD][1]utread:3: Problem reading buffer 104ef000 buflen 4096 retval 0 phy_offset 102400 retry 5
    2010-10-19 10:33:14.483: [  OCRRAW][1]ibctx: Failed to read the whole bootblock. Assumes invalid format.
    2010-10-19 10:33:14.483: [  OCRRAW][1]proprinit:problem reading the bootblock or superbloc 22
    2010-10-19 10:33:14.483: [  OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 0
    2010-10-19 10:33:14.483: [  OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 1
    2010-10-19 10:33:14.483: [  OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 2
    2010-10-19 10:33:14.484: [  OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 3
    2010-10-19 10:33:14.484: [  OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 4
    2010-10-19 10:33:14.484: [  OCROSD][1]utread:3: Problem reading buffer 104fe000 buflen 4096 retval 0 phy_offset 102400 retry 5
    2010-10-19 10:33:14.484: [  OCRRAW][1]propriogid:1_1: Failed to read the whole bootblock. Assumes invalid format.
    2010-10-19 10:33:14.541: [  OCRAPI][1]a_init:6a: Backend init successful
    2010-10-19 10:33:14.646: [ OCRCONF][1]Initialized DATABASE keys
    2010-10-19 10:33:14.650: [ OCRCONF][1]Exiting [status=success]...

    Hi,
    We are also trying to install 11.2.0.2 Grid infrastructure for Oracle RAC One Node on AIX 6.1. We did a POC in our lab environment and after much struggle got that working. Now we are building 4 clusters in the production environment and the first cluster installation failed while running root.sh on node2. We already have a Sev1 ticket open with Oracle Support but have not heard anything.
    Here is root.sh output from node2. The two node names are p01dou416 and p01dou417.
    CRS-4402: The CSS daemon was started in exclusive mode but found an active CSS daemon on node p01dou416, number 1, and is terminating
    An active cluster was found during exclusive startup, restarting to join the cluster
    Failed to start Oracle Clusterware stack
    Failed to start Cluster Synchorinisation Service in clustered mode at /u01/app/11.2.0/grid/crs/install/crsconfig_lib.pm line 1020.
    /u01/app/11.2.0/grid/perl/bin/perl -I/u01/app/11.2.0/grid/perl/lib -I/u01/app/11.2.0/grid/crs/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed
    [root@P01DOU417] /u01/app/11.2.0/grid #
    LOG output: /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/ rootcrs_p01dou417.log
    2010-11-13 17:22:14: Successfully started requested Oracle stack daemons
    2010-11-13 17:22:14: Starting CSS in clustered mode
    2010-11-13 17:22:14: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl start resource ora.cssd -init
    2010-11-13 17:32:28: Command output:
    CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
    CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
    CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
    CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded> CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
    CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
    CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
    CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
    CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
    CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
    CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
    CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
    CRS-5804: Communication error with agent process
    CRS-4000: Command Start failed, or completed with errors.
    End Command output2010-11-13 17:32:28: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
    2010-11-13 17:32:28: Command output:
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    End Command output2010-11-13 17:32:28: Checking the status of css
    2010-11-13 17:32:33: Executing cmd: /u01/app/11.2.0/grid/bin/crsctl check css
    2010-11-13 17:32:33: Command output:
    CRS-4530: Communications failure contacting Cluster Synchronization Services daemon
    End Command output2010-11-13 17:32:33: Checking the status of css
    2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssdmonitor' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.gipcd' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2676: Start of 'ora.cssdmonitor' on 'p01dou417' succeeded
    2010-11-13 17:32:38: CRS-2676: Start of 'ora.gipcd' on 'p01dou417' succeeded
    2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.cssd' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2672: Attempting to start 'ora.diskmon' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2676: Start of 'ora.diskmon' on 'p01dou417' succeeded
    2010-11-13 17:32:38: CRS-2674: Start of 'ora.cssd' on 'p01dou417' failed
    2010-11-13 17:32:38: CRS-2679: Attempting to clean 'ora.cssd' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2681: Clean of 'ora.cssd' on 'p01dou417' succeeded
    2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.diskmon' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2677: Stop of 'ora.diskmon' on 'p01dou417' succeeded
    2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.gipcd' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2677: Stop of 'ora.gipcd' on 'p01dou417' succeeded
    2010-11-13 17:32:38: CRS-2673: Attempting to stop 'ora.cssdmonitor' on 'p01dou417'
    2010-11-13 17:32:38: CRS-2677: Stop of 'ora.cssdmonitor' on 'p01dou417' succeeded
    2010-11-13 17:32:38: CRS-5804: Communication error with agent process
    2010-11-13 17:32:38: CRS-4000: Command Start failed, or completed with errors.
    2010-11-13 17:32:38: Failed to start Oracle Clusterware stack
    2010-11-13 17:32:38: ###### Begin DIE Stack Trace ######
    2010-11-13 17:32:38: Package File Line Calling
    2010-11-13 17:32:38: --------------- -------------------- ---- ----------
    2010-11-13 17:32:38: 1: main rootcrs.pl 324 crsconfig_lib::dietrap
    2010-11-13 17:32:38: 2: crsconfig_lib crsconfig_lib.pm 1020 main::__ANON__
    2010-11-13 17:32:38: 3: crsconfig_lib crsconfig_lib.pm 997 crsconfig_lib::start_cluster
    2010-11-13 17:32:38: 4: main rootcrs.pl 697 crsconfig_lib::perform_start_cluster
    2010-11-13 17:32:38: ####### End DIE Stack Trace #######
    2010-11-13 17:32:38: 'ROOTCRS_STACK' checkpoint has failed
    Any help on this is appreciated.
    Edited by: user12019257 on Nov 17, 2010 1:26 PM

  • Error 1935.An error occurred during the installation of assembly 'Microsoft.VC90.ATL or 'Microsoft.VC80.ATL'

    The OS is Windows Server 2008 R2
    I can't install any programs (like backup agents) that require these components: 
    Microsoft Visual C++ 2005 SP1 Redistributable Package (x64) or the
    Microsoft Visual C++ 2008 SP1 Redistributable Package (x64)
    I've tried unregistering the Windows Installer and reregistering it, starting from a clean boot scenario,
    This is the error message:
    Product: Microsoft Visual C++ 2005 Redistributable (x64) -- Error 1935.An error occurred during the installation of assembly 'Microsoft.VC80.ATL,type="win32",version="8.0.50727.762",publicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="amd64"'. Please
    refer to Help and Support for more information. HRESULT: 0x80070BC9. assembly interface: IAssemblyCacheItem, function: Commit, component: {837BF1EB-D770-94EB-A01F-C8B3B9A1E18E}
    Seems like there are thousands of entries when you google this error but not too many solutions.
    The only microsoft support KB entry that deals with this error only is for Windows 7, so the Fix It tool can't be run:
    http://support.microsoft.com/kb/970652

    Hi All
    I have the Same_D_n_Problem.... However, I WAS able to download and install the VC++ 2005 Redist x_64 after removing the one that was there.... Didn't help :(
    Tried removing, then installing using a CleanBoot - no luck
    REinstalled VC++2005 Redist. No problem but cannot install SQL 2008 R2
    Soooo... have traced the SQL Installer log file - and one can get to the entry by searching for 1935 - then looked back for what I think is the begining of the problem - I have marked this with ********************* here is the LogFile excerpt:
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\Services\SSIS Server - OK.
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA - OK.
    2010-12-29 22:08:59 Slp: HKEY_LOCAL_MACHINE\Software\Microsoft\Microsoft SQL Server\SqlUA\CurrentVersion - OK.
    2010-12-29 22:08:59 Slp: ------------------------------------------------------------
    2010-12-29 22:08:59 Slp: D:\SQLInstal\x64\FixSqlRegistryKey_x86.exe exit code: 0
    2010-12-29 22:08:59 Slp: Completed Action: FixSqlRegistryKey, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: PostMsiTimingConfigAction
    2010-12-29 22:08:59 Slp: The object state property 'workflow' is null/empty. *********************
    2010-12-29 22:08:59 Slp: Error: Action "PostMsiTimingConfigAction" failed during execution.
    2010-12-29 22:08:59 Slp: Completed Action: PostMsiTimingConfigAction, returned False
    2010-12-29 22:08:59 Slp: Completed Action: ExecuteStandardTimingsWorkflow, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: ExecuteCloseWorkflow
    2010-12-29 22:08:59 Slp: Workflow to execute: 'CLOSE'
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping Action: ProduceStatusLogs
    2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
    2010-12-29 22:08:59 Slp: Condition "Is the datastore flag /Scenario/GlobalFlags/AreProductFeaturesSupported set" did not pass as it returned false and true was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: FinalizeProgressStatus
    2010-12-29 22:08:59 Slp: Completed Action: FinalizeProgressStatus, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: RebootMessageAction
    2010-12-29 22:08:59 Slp: Completed Action: RebootMessageAction, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping Action: FinishPage
    2010-12-29 22:08:59 Slp: Action is being skipped due to the following restrictions:
    2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to EditionUpgrade" did not pass as it returned false and true was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Skipping property RequireMode of class: StopAction
    2010-12-29 22:08:59 Slp: Input of property will not be set due to the following failed restriction(s):
    2010-12-29 22:08:59 Slp: Condition "Is the user's scenario set to ComponentUpdate" did not pass as it returned true and false was expected.
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: CloseUI
    2010-12-29 22:08:59 Slp: Stop Action
    2010-12-29 22:08:59 Slp: Completed Action: CloseUI, returned True
    2010-12-29 22:08:59 Slp: Completed Action: ExecuteCloseWorkflow, returned True
    2010-12-29 22:08:59 Slp: ----------------------------------------------------------------------
    2010-12-29 22:08:59 Slp: Running Action: PassPidBackFromComponentUpdate
    2010-12-29 22:08:59 Slp: Pass the flag CuPidDisplayed to the main setup
    2010-12-29 22:08:59 Slp: ENU value specified, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: PID value specified, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: SQMREPORTING value is specified in CU workflow, trying to pass the value to main setup
    2010-12-29 22:08:59 Slp: Completed Action: PassPidBackFromComponentUpdate, returned True
    2010-12-29 22:08:59 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:08:59 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
    2010-12-29 22:08:59 Slp: Sco: Attempting to get registry value CustomerFeedback
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp: ----------------------------------------------------------------------
    2010-12-29 22:09:00 Slp:
    2010-12-29 22:09:00 Slp: Error result: -2068052081
    2010-12-29 22:09:00 Slp: Result facility code: 1212
    2010-12-29 22:09:00 Slp: Result error code: 1935
    2010-12-29 22:09:00 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey
    2010-12-29 22:09:00 Slp: Sco: Attempting to open registry subkey Software\Microsoft\PCHealth\ErrorReporting\DW\Installed
    2010-12-29 22:09:00 Slp: Sco: Attempting to get registry value DW0201
    2010-12-29 22:09:22 Slp: Submitted 1 of 1 failures to the Watson data repository
    2010-12-29 22:09:22 Slp: Sco: Attempting to create base registry key HKEY_LOCAL_MACHINE, machine
    2010-12-29 22:09:22 Slp: Sco: Attempting to open registry subkey Software\Microsoft\Microsoft SQL Server\100
    2010-12-29 22:09:22 Slp: Sco: Attempting to get registry value CustomerFeedback
    Would be great to hear others' thoughts on this
    Cheers
    Martin

  • Adobe Reader X (10.1.2) - An error occured during the installation of assembly component

    Hi there everyone,
    more or less is was forced to format and reset my system by today and one of the first programms i tried to re-install after my WIn 7 64 bit was back in action was Adobe Reader X. Unfortunately the following error occures during the installation (by the web installer and also by the 52MB stand alone installer). Maybe the installer requires some other tools, runtimes or something else to be installed to go on ahead with the adobe installation but I'm not quite sure.
    I would be very happy if someone could help me.

    The Problem solved itself meanwhile. After installing Windows 7 it was automatically loading the 71 last important updates from the Microsoft site and I didn't restart the system after installing all those updates (~270MB).
    After rebooting the system the Adobe Reader installed easily. Thanks for your help dude and your advice "restarting windows" was the right answer anyway. : o)
    Kind Regards,
    Schnörgel

  • Error occurs during the installation of icloud

    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6196",publicKeyToken="1fc8b 3b9a1e18e3b",process or Architecture="amd64". Please refer to Help and Support for more information. HRESULT: 0x80073715
    Can someone please tell me what this means and how I can goddamned fix it?

    I had the same error...
    An error occurred during the installation of assembly 'Microsoft.VC80.CRT,type="win32",version="8.0.50727.6196",publicKeyToken="1fc8b 3b9a1e18e3b",process or Architecture="amd64". Please refer to Help and Support for more information. HRESULT: 0x80073715.
    ...I believe it was because I had pending Windows Updates that were partially installed but required a system reboot to complete. Right after I went into windows update and told it to apply the updates and reboot the iCloud Control Panel installed just fine.
    Hope this helps.

  • I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".

    I am trying to install itunes on my hp laptop with windows vista 64 bit. But when i install i get this error   "An error occured during the installation of assembly "Microsoft.VC80.CRT.type="win32"version="8.0.50727.6195".publickeyTOken="1fc8b3 b9a1e18e3b".processorArchitecture="x86""

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • I am using Windows 7 Home Premium 64-bit OS.  I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installa

    I am using Windows 7 Home Premium 64-bit OS.I've never had this problem before... today I opened iTunes and it prompted me to download the newest version.  I use iTunes all the time and have updated it multiple times with no issues.  During the installation process it gave me an error message that said: 
    Runtime error! 
    Program C:\Program Files\iTunes.exe
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I quit the installation, uninstalled iTunes and rebooted my computer.  I now receive a similar message with a slight difference:
    Runtime error! 
    Program C:\Program Files (x86)...
    R0634
    An application has made an attempt to load the C runtime library incorrectly.
    Please contact the application's support team for more information.
    I did not leave anything out from the error message.  It doesn't point to a specific file, it just ends with "(x86)..."  Every time I boot up my computer, this error message pops up on my desktop.
    How do I repair this issue?  I have found multiple suggested solutions but am unsure which one is the best, and I don't want to try a bunch of different things for fear I may make the problem worse.  I would like to try and fix this myself if possible but I need to know if that is really possible or if I need to take my computer to someone for repairs.  Any suggestions will be greatly appreciated!!

    Hi lustyln,
    I'm having a little trouble understanding all of what you are trying to explain. From what I can tell, it sounds like your PC has a lot of software problems and you want to know what is supposed to be there and what isn't.
    For reference, here are your product specifications:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01893242&lc=en&product=4043282
    To get your PC software back to how it was when it was first purchased, run a system recovery:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01867418&lc=en&product=4043282
    I hope this helps.
    ...an HP employee just trying to help where I can, but not speaking on behalf of HP.

  • I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I downloaded the ios5 and during the installation something went really wrong and now I can't open it, restore it or reset it by hand. Any ideas?

    I am having an issue as well, I think it is ongoing for everyone who is trying to update.

  • I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but th

    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

    If you are searching the registry, check for the "Senforce" string. It should be at HKLM\Software\Senforce
    Try running the install program for the ZSC with the following command line:
    setup.exe /V"STUNINSTALL=1"
    If you've specified an uninstall password, try this one instead:
    setup.exe /V"STUNINSTALL=1 STUIP=password"" (please note the double quote at the end)
    Let me know if that helped you.
    Daniel
    >>>
    From: Andy_DeWees<[email protected] du>
    To:novell.support.zenworks.endpoint-security-management
    Date: 2/5/2009 12:52 PM
    Subject: I have installed the agent 10 or 15 times and one installation hasfailed, no error appeared during the installation but I am havinginconsistent issues with my ethernet card not working here and there. Werebooted and can log into Novell client but the login prompt did not appearfor ESM client or the icon was not in the systray. Everything seems towork, besides at times (a couple times today) it terminates his ethernetcard/connection. I would re-image his computer but he has severalapplications and
    I have installed the agent 10 or 15 times and one installation has failed, no error appeared during the installation but I am having inconsistent issues with my ethernet card not working here and there. We rebooted and can log into Novell client but the login prompt did not appear for ESM client or the icon was not in the systray. Everything seems to work, besides at times (a couple times today) it terminates his ethernet card/connection. I would re-image his computer but he has several applications and it would take several hours, so I am hoping someone has an idea to fix this issue. So I was trying to figure out why he did not get the prompt to login and why it's not in the systray and it appears to not have completed the install? I checked the add/remove programs, its not listed within their, I also checked the registry and found nothing for endpoint within their, but the files are within c:\program files\novell\zenworks endpoint security.
    I have also tried uninstalling it but that fails due to it "not being installed", and it will not reinstall over itself either.
    I did notice that stuninstdrv.exe is running in task manager. Any help would be great...
    Windows xp sp3
    ESM 3.5.154
    Thanks,
    Andy

  • Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

    You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

  • Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and

    Cannot install itunes, I keep getting this message:An error occured during the installation of assembly 'Microsoft .VC80.CRT .type="win32" ,version="8.0.50727.6195".publicKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="x86"'. Please refer to Help and

    Repair your Apple Application Support.
    Control Panel > Programs n Features > highlight AAS, click CHANGE the REPAIR

  • An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30

    An error ocurred during the installation of assembly 'Microsoft. VC80.crt,type="win32", version="8.0.50727.4053".publickKeyToken="1fc8b3b9a1e18e3b".processorArchitectu re="amd64".Please refer to help and support for more information. HRESULT: 0x80071A30
    Instale iTunes perfectamente, conecte mi iPone y me dijo que necesitaba otra version que borrase la actual y instalase la nueva, borre la que tenia, y al instalar la nueva me salia esto y no tengo forma de instalarla. Ya hice los tutoriales de la pagina, y nada.

    OK.  If both of you are Windows 7.  Make sure you go to Windows update (START button, type in Windows Update). Check for updates and update whatever that are available. (especially Microsoft .NET Framework 4 )
    After that see if you still get this error message.
    The last resort would be to unistall and reinstall the whole thing.
    Follow the steps below:
    1. Go to Microsoft website to fix install and Unistall problems. Click "Run now" from Fix it to remove all iTunes & related installer files:
    http://support.microsoft.com/mats/Program_Install_and_Uninstall
    Be aware that Windows Installer CleanUp Utility will not remove the actual program from your computer. However, it will remove the installation files so that you can start the installation, upgrade, or uninstall over.
    2. You should remove all instances of iTunes and the rest of the components listed below:
    it may be necessary to remove all traces of iTunes, QuickTime, and related software components from your computer before reinstalling iTunes.
    Use the Control Panel to uninstall iTunes and related software components in the following order:
    iTunes
    QuickTime
    Apple Software Update
    Apple Mobile Device Support
    Bonjour
    Apple Application Support (iTunes 9 or later)
    Follow the instructions from Apple article listed here: http://support.apple.com/kb/HT1923 to remove all components
    3. Reboot your computer. Next, download iTunes from here:http://www.apple.com/itunes/download/ and install from scratch

Maybe you are looking for

  • Busy cursor on swf remains turning

    Hello, Am having a problem. I developed a simple application on flex 2 and it communicates with Coldfusion .cfc file. Pleaes find the codes for my application and my cfc below. When I click the button, it does everything that the cfc says...for examp

  • Dreamweaver CS 6.  CSS Styles Greyed Out

    When I view the ALL drop down menu in the CSS Styles panel I do not see any casading CSS styles.  I have just brought a new defined CCS layout in and can view the Current drop down menu but when I got to the All style option it appears grayed out and

  • All my buttons stopped working, and i have no error in codes or anything :s

    So i am working in an iOS app using Adobe flash pro cs6 and i had all my btn starting on frame on, in the background layer, so the btns never dissappear so is the layer that contains the code for those 3 buttons (Back, Menu, Next) the as3 layer and t

  • Osd_c03 routines

    Hi, Does any one has business content routines for 0DOC_CLASS and 0DEB_CRED from following DS 2LIS_11_VAHDR,2LIS_11_VAITM,2LIS_11_V_ITM,2LIS_12_VCHDR,2LIS_12_VCITM,2LIS_13_VDHDR,2LIS_13_VDITM. i cannot find them in Business content installed here. i

  • Is there or will there be a blogging component in webcenter

    Webcenter seems to have almost all the collaboration features you could imagine. But one thing is missing: a Blog. Have i missed something or will there be a Blog component i the final release? regards Johnny