Weird issues with latest X-Fi Driver/Software

-Weird issues with latest X-Fi Driver/SoftwareO So I decided to update my X-fi drivers and software today, but I am running into some issues.
First and foremost is that my Volume Panel no longer works correctly. It brings up this cheap pos window when I click on the Systray icon instead of the corrrect full featured interface.
It lists the merdia source programs and has a volume dial, thats all this new one has.
The other issues are that none of the software updates want to install: Alchemy, Mixer, Mediasource Go
They all give me a message after I being to install that says "can not locate layout.bin please specify the path"? and gives my a "this setip reqires a cd" window and lists a path to a temp folder inside my windows folder.
Installing these for Vista? Ultimate 32-bit.

Similar Messages

HI. ... Anyone know of any issues with using Logic Pro music software with Mountain lion OS.. I have heard rumours in the past is that all sorted now?

HI. ...
Anyone know of any issues with using Logic Pro music software with Mountain lion OS..
I have heard rumours in the past is that all sorted now?

At least Logic Pro 9 and Logic Pro X work correctly in Mountain Lion. Furthermore, Logic Pro X requires the latest OS X Mountain Lion version

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue.

Is there an issue with the hitachi hard drives in the MacBook Pro's ? Got a 15 inch and a 13 inch at the same time and both drives have failed in under two years. I have heard from a few other people with same issue. Other drive I have had have lasted at least 5 or more years.

there is a dylib you can put in the springboard if jailbroken but if not you have to find an apple store

Issue with Removing the Patch Set Software 9.2.0.8

Hi experts,
I have issue with removing the patch set software 9.2.0.8
I'm working on solaris box recently ugraded to 9.2.0.8 from 9.2.0.7. however i want to downgrade now. I have followed the document 4547809 mentioned. Now the real issue is when i restored the oracle_home (9.2.0.7) and execute sqlplus /nolog here is error message shown
bash-2.05$ sqlplus /nolog
bash: /oracle/test/920_64/bin/sqlplus: No such file or directory
bash-2.05$ lsnrctl
bash: /oracle/test/920_64/bin/lsnrctl: No such file or directory
Please help
thanks in advance

Hi,
Thanks for reply you are right
ls -l /oracle/test/920_64/bin/sqlplus was not exist. However i copied everything from the backup.
I'm trying again
cp -r bk_test_home/* /oracle/test/920_64/*
still i couldn't the file however it exist in bk_test_home. please suggest
Thanks and regards

Having a weird issue with my assign after java embedding

hi,
I'm having a weird issue with my assign activity, i am using a Java Embedding wherin i access a variable and assign it some data, later in next step when i try to assign some other data to this same variable in assign activity i get a Error message as below.
com.oracle.bpel.client.BPELFault: faultName: {{http://schemas.xmlsoap.org/ws/2003/03/business-process/}selectionFailure} parts: {{ summary=Invalid to part type. When performing the assign operation, the to node THIS,IS,,TEST is invalid. The node named in the error message was either null or an empty node set, and it was not an instance of org.w3c.Element. Verify the node value at line number 795 is not null and is an instance of org.w3c.Element. } .
i'm using soa 11.1.1.5
Can anyone please help ?
- Thanks
Shirish

Shirish,
It's a bug and you will need to apply a patch for that.
You can find all explanation in Oracle Support Id ID 1194228.1.
Arik

Weird issue with safari on iPad mini?

I just had a weird issue with my safari web page, it stopped responding to my scrolling. I then tried coming out of it and going bad in again a couple of times, which still did not work. It then started jiggling around all over the place (jiggling is the only word I can use to describe it), it was as if you had clicked and held the page with a mouse and then started moving the page all over the place, or even like an earthquake on the page. The tab then closed. Can anyone explain this? Thanks.

Quit Safari then reset your iPad.
Double click the Home button to show the screen with running and recently used apps. Each app icon will have a sample page above it. Flick up on the page (not the app icon) and the page will fly away and the app icon will disappear. This quits that app. Then reset your device. Press and hold the Home and Sleep buttons simultaneously until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.

Weird Issue With Windows Live Mail

I have a friend using Windows Live Mail and he's been having some weird issues with it. When he goes to forward an email, it will occasionally open the email up twice, which isn't a huge deal it's just more annoying than anything. I thought maybe there was
some malware or other junk that could be causing it so I ran MBAM and got everything cleaned up but it's still happening. Any other thoughts on what could cause this?
Thanks.

Windows Live Mail support is found @
https://login.live.com/login.srf?wa=wsignin1.0&rpsnv=12&ct=1410798892&rver=6.1.6206.0&wp=LBI&wreply=https:%2F%2Fanswers.microsoft.com%2Fen-us%2Fsite%2Fcompletesignin%3Fsilent%3DFalse&id=273572
You must login to your Windows Live account and then Ask a Question.
This forum is dedicated to the Windows 7 operating system. Windows Live is not a feature of Windows 7 and Microsoft has established support for Windows Live Mail @ the Microsoft Community found @
http://answers.microsoft.com/en-us/windows/forum/windows_7-ecoms?auth=1
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

I am having an issue with a USB flash drive.

Hello, I am having an issue with a USB flash drive. I have a 2012 iMac OS X 10.9. Drive keeps on disconnecting after about 30 seconds. I tried to reformat through Disk Utility but doesn't allow me to verify or repair as it disconnects. This same drive works fine on Windows machines. I tried all USB ports but all give the same issue. Message is: "Disk Not Ejected Properly. Eject "No Name" before disconnecting or turning off." When I attempt to copy data from the disk it comes up with the message: "The Finder can't complete the operation because some data in "" can't be read or written (Error code -36)". I believe the solution for this error is to format the drive but as mentioned this function doesn't work. I need to copy data from a Windows machine to my iMac. Any suggestions with this is appreciated. Thanks!

I went back to a Windows machine, formatted it to NTFS (so lost the data but had a backup), recopied the data. Went back to the Mac but same issue happened after I tried copying the data "Disk Not Ejected Properly - Eject " " before disconnecting or turning off." One of the USB ports didn't detect the 32GB flash drive at all. And disconnected on another one.

Weird issue with Exchange 2010 Room Mailboxes - allows multiple booking of the created meeting rooms

Hi,
we are facing weird issue with Exchange 2010 Room Mailboxes
it allows multiple booking of the created meeting rooms.Sometime we are not getting acceptance or declined mail but and we could see our meetings has been booked at slot.
for e.g.
User A booked room1 with weekly recurrence for time 4pm to 5pm., and User B made his booking other day,without realizing that user A meeting is exists.
Neither of user A nor user B got declined/rejected emails.
please sahre guidelines if anyone known to this issue.
Note - Allow Conflict booking is disabled already :) but still have issue
Thanks,
NPratik

Hi,
Just add more in this issue, following testing is done.
referring results and conclusion, you will get better view on issue
====================
Test Case - 1
User OnCloud/O365 - Pratik Nimbalkar
Email ID - [email protected]
( same as UPN)
Room Booking Scenario - Book Room for 6.30pm to 7.30pm slot
Results - Accepted
Room Booking Scenario for same slot- ReBook Room for 6.30pm to 7.30pm slot
Results - Declined
Conclusion = working fine
==================
Test Case - 2
User OnCloud/O365 - Testsm
Email ID - [email protected]
( different from UPN)
Room Booking Scenario - Rebook Room for 6.30pm to 7.30pm slot
Results - No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
Room Booking Scenario for same slot- Rebook Room for 6.30pm to 7.30pm slot
Results -No Response from Room Mailbox neither Accepted nor Declined
But we can see as booked as "Tentative"
=========================
Conclusion = There is issue with booking room and not getting response while user is
@abc.my id.
======================
Note = for all other on premise users those are having @abc.co.in
and @abc.my it is working fine. Users are getting respective correct reply from room mailboxes.
This issue seems with only on cloud
@abc.my users

2 issues with last Audigy 1 driver upd

I have presently 2 issues with the last drivers released for the Audigy cards. Both issues are able to be reproduced consistently, and did not happen with the last release (from last year), or at least not consistently.
. Crackling while playing back Quicktime files has increased. Previously it was around in 0 files that crackled (and only Quicktime that I noticed). Now it is around in 3.
2. I cannot play back DVD's through Windows Media player 0, period. Whenever I try I get the following message:
"this pin cannot use the supplied media type"
How do I know this is driver related? Well, by reverting to the last drivers the message goes away. Also, if I disable the soundcard totally the error goes away and the video plays, albiet without sound.
Anyways just thought I'd post this here so hopefully someone at Creative sees it and actually fixes the issue.
BTW, yes I did try reinstalling the drivers. Twice. Even redownloaded them in case the original D/L was corrupted.
Edited to clarify about the DVD issue:
To make it a little clearer about the DVD issue, when I first got my Audigy while using the original release drivers on the install CD, I could not use 5. output with the soundcard decoding. To try to get it working, I would put the output to SPDIF and set the soundcard to decode AC3. This would not even allow the movie to play in WMP 0, often just crashed the player. With the last driver update before the January one, I could set the output to SPDIF in WMP 0 and AC3 to decode in the Creative audio control panel and I would have 5. surround output. With the last driver update, setting output to SPDIF and trying to play the movie gives the 'this pin cannot use the supplied media type' error message. If, however, I start the movie on 2 speaker output in WMP 0 it will play normally. While the movie has started I can go into preferences and switch output to SPDIF and 5. surround kicks in and works fine usually. But, if I then stop the movie and restart it I once again start getting the 'this pin cannot use the supplied media type' error, and the DVD will not play.
Also thought it worth mentioning XP is up to date, SP2 and all the latest patches, Nvidia drivers up to date (not that it's a video card issue) and Direct X is up to date also (I run the update once a month just in case).Message Edited by Drifter73 on 05-5-2006 0:35 AM

Jay,
As to your first question: it could be a OS and discoverer problem that you are running into. I would suggestion upgrading atleast to 3.1.45 or higher. If you can go to 4.1
I can not really assist you with your other questions as I do not have that version available..
CHW

Weird issues with pasted screenshots

I am using Photoshop CS6 on Windows 8 desktop, i am connecting using Remote Desktop to a Windows 2008 server and taking a screenshot (all desktop apps, no Windows 8 apps involved).
After taking the screenshot i can paste it into a simple program like Paint.net without issues, it looks fine. But if i paste it into Photoshop CS6 the left side of the screenshot has weird artifacts, looks like parts of the window. Also i get some odd multi-color boxes. What is going on? Am i doing something wrong?
The odd thing if i paste it into Paint.net first, then cut it from there and into Photoshop it is perfect.
Really stuck here, any help appreciated for this newbie. Thank you!

That sounds like problems with your video card driver.
You can try setting the GPU mode to Basic, turning off the GPU, or updating the driver from the GPU maker's website.

Performance issues with latest iTunes update

Hello everyone,
I'm having somewhat of an issue with the latest update for iTunes (10.5), ever since the update was installed the 'AppleMobileDeviceService.exe' is using all my processing power.
Now I know my laptop isn't the latest spec, but before this was never an issue. The only way I can still work with it is when I turn off the service via the Task Manager.
When I launch the iTunes programme it gets even worse, another service called 'APSdeamon.exe' is eating up the processor aswell, albeit they both consume 50% now. As a result I cannot access the iTunes Store or do much else.
I do have to mention all my music is stored on an external HDD which is connected via USB to my laptop, but this was never any different.
I've reïnstalled all Apple components twice already, one including a specific deletion of all Apple program folders manually.
Since I can always turn off the services manually it isn't a big issue, but does anyone have any suggestions or ideas how this could be resolved?

Hello Mauricio,
Thank you for the details of the issue you are experiencing with installing the latest iTunes update. I recommend following the steps below:
Resolution
Follow these steps to resolve the issue:
Check for .dll files
Go to C:\Program Files (x86)\iTunes and C:\Program Files\iTunes and look for .dll files.
If you find QTMovie.DLL, or any other .dll files, move them to the desktop.
Reboot your computer.
Note: Depending on your operating system, you may only have one of the listed paths.
Uninstall and reinstall iTunes
Uninstall iTunes and all of its related components.
Reboot your computer. If you can't uninstall a piece of Apple software, try using the Microsoft Program Install and Uninstall Utility.
Re-download and reinstall iTunes 11.1.4.
When you get to the step to uninstall iTunes, it is important to uninstall iTunes and the related components in the order listed in the link for that step.
You can find the full article here:
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Thank you for using Apple Support Communities.
Best,
Sheila M.

Weird issue with Site Template in O365

Hi,
I ran into a weird issue while working with Site Template in O365 last night.
I created a sub-site in a Site Collection with some Site Columns, CT and Lists. Then I saved it as a Site Template so that it can be used for different sites. Then I created 3 different sub-sites using the template. All went good.
After some time when I looked at the sites, something really irritating happened. I saw the first two sites were missing all the site columns and CT. And the latest third site had 3 copies of each Site Column and CT. Though for the first two sites,
all the CT, Site Columns were available at List level, but it wad just the reference. The Actual CT was not seen the site settings.
This is the first time I saw this kind of issue. Not sure what is the reason for this.
Any idea around this ?
Thanks,
Nutan
Nutan Sharma

Hi,
According to your description, my understanding is that the error occurred when you created a site from the template with no files in the document library.
I tested the same scenario per your post, and I can create a site from the template with no files in the document library with no errors.
To solve this issue, I recommend to verify the things below:
Did you save the site as a template with Include Content checked? If yes, I recommend to test if it works when saving the site as a template with Include Content unchecked.
Test the same scenario with a new site to narrow the issue scope.
I also recommend to check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2010, by default, ULS log is at C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\LOGS.
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Best regards.
Thanks
Victoria Xia
TechNet Community Support

Facing bug Issue with Visual Studio 2010 SP1 software. need a Hotfix Patch KB2561001

Hi Team,
i have installed Visual Studio 2010 SP1 software in my system. but i am facing some issue with a bug. This bug needs a Specific Hotfix Patch ( KB2561001).
But when i am clicked on above link, not able to find this patch.
Kindly request you to provide this Requested patch as project has been stuck without this.
please look into this issue on priority. Eager to listen from your side.

Hi mihir ray,
Like this report:
https://connect.microsoft.com/VisualStudio/feedback/details/611665/storegeneratedpattern-does-not-saved-properly-into-edmx-entity-framework-4-0
It seems that the link for this kb is not available. So the real issue is that which kind of issue you get, and then check whether this issue has been resolved by the latest VS version. Like the above report, maybe the new VS version would be better for
certain limitations for old versions.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Weird issue with HP Photosmart and HPLIP 3.9.10

I have a wireless printer, HP C6380. This printer is correctly installed in both my laptop and my desktop, both running arch64, KDE4, with latest updates. However, the driver on my desktop displays a maximum resolution of 600x600, while my laptop correctly displays a maximum resolution of 1200x1200 Any clues?
Last edited by panosk (2009-12-01 13:58:43)

Actually, I couldn't print from my laptop, so I reinstalled latest hplip and had the same issue: no 1200dpi option. However, I downgraded hplip to version 3.9.8 and the option for 1200dpi appeared again, so something is wrong with version 3.9.10. I have also posted the issue in hplips forums.

Weird issues with latest X-Fi Driver/Software

Similar Messages

Maybe you are looking for