What are the pixel dimensions for creating an Apple ibook book cover?

I'm trying to create a book cover for Apple ibooks, what are the pixel dimensions requirements?

Thanks again.
Apple seems to have made it more confusing than it should be.
As an aside, the Apple documentation contradicts itself.
Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode.
This clearly says the shorter side must be at least 1400 pixels. The next sentence says this:
For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide.
That doesn't make sense, seeing that the shorter side is supposed to be at least 1400 pixels, meaning it should say "1400 x 4900" for the same aspect ratio.
...I did notice this too.
So, if as you say, that the Cover Art and Cover image terms are the same and the 2 million limit does not apply, then it is unclear to me why Apple sent this message to me about cover file being rejected
"Action Required: Your book could not be delivered to the iBookstore.
The following images are larger than two million pixels and must be resized:
Full ePub: Cover_xyz.jpg "
I'll probably need to have the cover file in epub and Cover Image for Asset in iTunes Producer be named differently (but be copies of the same file) so I can understand which one is the "problem" file.
And finally, why does Apple refer to Cover Art twice here and then end in last sentence with Cover Image if they are the same ( and if they are the same why not state "this cover image").
"Cover art (also known as a marketing image or jacket) should be at least 1400 pixels along the smaller axis and must be a JPEG or PNG file in RGB Color mode. For an average trade paperback, this could be 400 x 1400 minimum size, as the books are generally taller than they are wide. For best results, deliver the largest pixel dimensions possible. When possible, match cover art to the cover contained in the book file. The 2 million pixel maximum does not apply to the cover image".

Similar Messages

  • What are the basic steps for creating a content repository?

    I am trying to create a document store on a file system (fsdb) that will hold files that are ftp's to that location. Is this possible using KM? If so, what are the basic steps for creating a file system repository and using it through KM? I have found stuff on help.sap.com but that only tells you what each component does not what actual steps need to be taken to setup KM, such as user rights , creating an entry point, so that all of KM is not visible, etc...
    If anyone knows of any guides that show a step by step process that would be great too.
    Thanks
    Paul

    Hi Paul
    First of all you need to create a new repository
    Suppose you want to add all the documents under folder Paul under C: Drive
    (Even you can put whole documents of C: drive into Paul)
    Navigate to System Admin -> System Configuration -> Knowledge management -> Content Management -> Repository Manager -> File System Repository
    There you can create a new directory by clicking on button New
    Give the parameters as follows :-
    Name               :           Anything you like
    Description       :           Anything you want
    Prefix (must start with /)  :  Probably same as your repository name like \Paul
    Lookup mode : caseless
    Root Directory   :  C:\Paul
    NOTE:  This is the trick. You need to give the proper path means folder path which you want use as repository)
    Repository Services  :  Any services you want
    Property Search : Managercom.sapportals.wcm.repository.manager.generic.search.SimplePropertySearchManager
    Security Manager         :           AclSecurityManager
    ACL Manager Cache   :           ca_cm_rep_acl
    The save it
    Now see whether the same repository is coming under KM Content or not, if not may be after restart it will come.
    I think the above information will help you. If still you have problem, please feel free to contect me.
    Regards,
    Chamkaur

  • What are the pixel dimensions of emailed photos from a 4S?

    Don't have a 4S and I'm wondering what the pixel dimensions (e.g. 1280x960) are for the Actual sized photos, Large size, and Medium size when you email a photo.
    Thanks!

    See Optimizing performance in your iBooks Author books
    Density is discussed by Apple in this context as 'dpi'...
    132 - iPad 2
    264 - new iPad
    At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
    Good luck.
    Ken

  • What are the different options for creating a basic image slideshow in Dreamweaver 5?

    Hi, I have created slideshows in Bridge, and they all work fine. They aren't exactly what I had in mind, but this was the only solution I could find that I could understand. My knowledge of web design is minimal at the most. I have attached the slideshows to my html website using IFrames, but it doesn't load properly in Safari.
    I included the code at the bottom of this post.
    The code dealing with the slideshow and IFrame in question are towards the bottom of the document, I marked them in bold. All the styles with regards to the <div> locations and such are on a separate stylesheet, I'm not sure if you would need that to help out.
    I'm wondering if someone could clue me in as to what I can do with this code to make this slideshow work properly in safari. I checked in Chrome and it loads properly. Unsure about other browsers, I do not have access currently.
    I am also wondering if there is another way I can create a slideshow using CSS5. This slide show is fine, but I was also looking to include text--image names and descriptions--without having to edit each image in Photoshop to include the text.
    Thank you for your time, any help would be appreciated.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta name="creator/artist" content="Ryan Olsen" /><meta name="keywords" content="Ryan Olsen, artist, paint, draw, dark fantasy, landscape, seascape, Paire, Connecicut, New York" /><meta name="description" content="The collection of art by Ryan Olsen" />
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Ryan Olsen's Studio</title>
    <script type="text/javascript">
    function MM_swapImgRestore() { //v3.0
      var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
    function MM_preloadImages() { //v3.0
      var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
        var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
        if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
    function MM_findObj(n, d) { //v4.01
      var p,i,x;  if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
        d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
      if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
      for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
      if(!x && d.getElementById) x=d.getElementById(n); return x;
    function MM_swapImage() { //v3.0
      var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
       if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
    </script>
    <link href="ryanolsenstudios.css" rel="stylesheet" type="text/css" />
    <script src="SpryAssets/SpryMenuBar.js" type="text/javascript"></script>
    <link href="SpryAssets/SpryMenuBarVertical.css" rel="stylesheet" type="text/css" />
    </head>
    <body onload="MM_preloadImages('images/gallerytabroll.jpg','images/transformativeroll.jpg','ima ges/landscapesroll.jpg','../ryanolsenstudios/illustrationstab.jpg','images/illustrationrol l.jpg','images/bioroll.jpg','images/petportraitroll.jpg','images/sparklessroll.jpg')">
    <div id="pagetop">
    <div id="header">
    <img src="images/name.jpg" width="1057" height="87" alt="name" />
    </div>
    <div id="banner">
    <img src="images/banner.jpg" width="1158" height="155" alt="banner" /> </</div>
    </div>
    <div id="navigationalmenu">
    <div id="gallerytab">
    <ul id="MenuBar2" class="MenuBarVertical">
      <li><a class="MenuBarItemSubmenu" href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('gallery tab','','images/gallerytabroll.jpg',1)"><img src="images/gallerytab.jpg" alt="gallery" name="gallery tab" width="252" height="72" border="0" class="MenuBarItemSubmenu" id="gallery tab" /></a>
        <ul>
          <li><a href="transformative.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('transformative','','images/transformativeroll.jpg',1)"><img src="images/transformative.jpg" alt="transformative" name="transformative" width="174" height="53" border="0" id="transformative" /></a>
          <li><a href="landscapes.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('landscapes','','images/landscapesroll.jpg',1)"><img src="images/landscapes.jpg" name="landscapes" width="174" height="53" border="0" id="landscapes" /></a></li>
          <li><a href="illustrations.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('illustrations','','images/illustrationroll.jpg',1)"><img src="images/illustrations.jpg" name="illustrations" width="174" height="53" border="0" id="illustrations" /></a>
    </li>
    <li>
      <a href="petportraits.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('pet portrait','','images/petportraitroll.jpg',1)"><img src="images/petportrait.jpg" alt="pet portraits" name="pet portrait" width="174" height="53" border="0" id="pet portrait" /></a></li>
    <li>
    <a href="sparkless.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('sparkless','','images/sparklessroll.jpg',1)"><img src="images/sparkless.jpg" alt="sparkless" name="sparkless" width="174" height="53" border="0" id="sparkless" /></a>
    </li>
        </ul>
      </li>
    </ul>
    </div>
    <div id="showstab">
    <a href="shows.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('showstab','','images/showsroll.jpg',0)"><img src="images/shows.jpg" alt="shows" name="showstab" width="252" height="72" border="0" id="showstab2" /></a>
    </div>
    <div id="hometab">
    <a href="home.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('hometab','','images/hometabroll.jpg',0)"><img src="images/hometab.jpg" alt="home" name="hometab" width="252" height="72" border="0" id="hometab2" /></a>
    </div>
    <div id="biotab">
    <a href="bio.html" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('bio','','images/bioroll.jpg',1)"><img src="images/bio.jpg" alt="bio" name="bio" width="252" height="72" border="0" id="bio" /></a>
    </div>
    </div>
    <div id="warpage">
    <!-- Facebook Badge START --><a href="https://www.facebook.com/WARSPIT" target="_TOP" style="font-family: &quot;lucida grande&quot;,tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Welcome to WAR">Welcome to WAR</a><br/><a href="https://www.facebook.com/WARSPIT" target="_TOP" title="Welcome to WAR"><img src="https://badge.facebook.com/badge/515768845136977.2357.1022321304.png" style="border: 0px;" /></a><br/><a href="https://www.facebook.com/advertising" target="_TOP" style="font-family: &quot;lucida grande&quot;,tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" title="Make your own badge!">Promote Your Page Too</a><!-- Facebook Badge END -->
    </div>
    <div id="ryanpage">
    <!-- Facebook Badge START --><a href="https://www.facebook.com/ryanolsenstudios" title="Ryan Olsen Studios" style="font-family: &quot;lucida grande&quot;,tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" target="_TOP">Ryan Olsen Studios</a><br /><a href="https://www.facebook.com/ryanolsenstudios" title="Ryan Olsen Studios" target="_TOP"><img class="img" src="https://badge.facebook.com/badge/572127626212351.1710.552992230.png" style="border: 0px;" alt="" /></a><br /><a href="https://www.facebook.com/advertising" title="Make your own badge!" style="font-family: &quot;lucida grande&quot;,tahoma,verdana,arial,sans-serif; font-size: 11px; font-variant: normal; font-style: normal; font-weight: normal; color: #3B5998; text-decoration: none;" target="_TOP">Promote Your Page Too</a><!-- Facebook Badge END -->
    </div>
    <div id="ryaninstagram">
    <a href="http://instagram.com/ryanolsenstudios" target="_new"><img src="images/instagram-glyph.jpg" width="112" height="144" alt="instagram" /></a>
    </div>
    <div id="gallery">
    <iframe src="Transformative/index.html" width="1003" height="834" frameborder="0" name="gallery">
    </iframe>
    </div>
    </div>
    <script type="text/javascript">
    var MenuBar2 = new Spry.Widget.MenuBar("MenuBar2", {imgRight:"SpryAssets/SpryMenuBarRightHover.gif"});
    </script>
    </body>
    </html>

    Have a look here Jquery slideshow tutorial for beginners | WEBTUTS

  • What are the best options for creating a PDF with bookmarks and a hyperlinked TOC?

    What I'm interested in is whether or not there is an alternate process I could follow that would side step Word 2011's inability to export to PDF with bookmarks and hyperlinked TOCs. How do you create PDF documents with bookmarks and hyperlinked TOCs in your documents?
    Some background:
    In Word 2010 and 2013 for Windows (and I'm sure this applies to older versions as well), you can export documents to a PDF file format where the exported file will carry over the bookmarks and hyperlinked table of contents. Specifically, by making specific text headers, will appear in the final PDF file as bookmarks on the side (see image taken from Adobe's website).
    Regarding the table of contents, using Word's built in Table of Contents feature successfully ports the ability to navigate to a specific section by clicking on its chapter in the table of contents to the finished PDF file.
    I've read several forum discussions that say it's not possible to do this from Word 2011, so my current solution is to just finish all documents on a Windows machine (either with parallels or a separate computer). The alternate process flow of creating a word document, exporting it to PDF, then rehyperlinking everything in Acrobat is just too time consuming to consider.

    Hi, beejasaurus
    I found a possible kluge from this discussion here
    https://forums.adobe.com/thread/1008480
    Create the hyperlinks in Word, save the file
    Open that file with Pages, export as PDF.
    The links work from that PDF.
    Note, I did not try this with TOC but it worked with hyperlinks embedded in the Word document

  • What are the methods used for creating customer

    i have to upload a text file and create customer using idoc .can any one suggest the methods used to fullfil this requirement

    Hi,
    Upload the file using the function module GUI_UPLOAD into an internal table then try to pass the values from the file to the segments in the idoc DEBMAS03 using the function module MASTERIDOC_CREATE_DEBMAS to create the customer.
    Any doubts regarding you can clarify.
    Thanks&Regards
    Sarves

  • What are the pre requisites for SPLIT VALUATION OF A MATERIALS

    Dear friends
    What are the pre requisites for creating SPLIT VALUATION for  A MATERIAL in particular Plant
    regards
    Radha

    Hi,
    I am not sure what you mean exactly.
    But you would need to have the valuation category and all of the valuation types created in config in advance.
    Then you can allocate the appropriate valuation category to the material (accounting view) (as long as no stock or open POs etc. exist).
    then you can create your additional accounting views (one for each valuation type that you want to use).
    Steve B

  • What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?

    What are the best dimensions to allow for iPad 3 Retina for full-page landscape images?
    I read an article and cannot find it that said something about trying to make it 2million pixels and JPG to keep it small, but what exactly should the dimensions be that I ultimately import?  Is there some kind of a "density" setting I have to use, as well, when exporting from Photoshop, for example?

    See Optimizing performance in your iBooks Author books
    Density is discussed by Apple in this context as 'dpi'...
    132 - iPad 2
    264 - new iPad
    At the top of this forum there are popular links listed on the right, including image sizing etc. Be sure to study those existing/previous threads on this topic.
    Good luck.
    Ken

  • What are the allowable dimensions of screenshots for ibooks?

    What are the allowable dimensions of screenshots for ibookes?  I know the requirement is very specific.
    And what is the best tool to do so?  I tried to use the native screenshot tool but it is hard to make the size precise.

    Minimum size is 600 pixels in the shorter dimension. Maximum size is 2048 pixels in the longer dimension. That's what you get when you take a screenshot on a new iPad. (There is no point in having something larger than this.) Screenshots taken with an older iPad are 1024x768.
    For my book, I just took screenshots on an iPad 2 (1024x768) and used those. They were accepted without complaint.
    Michi.

  • What are the ideal specs for a DigiBeta master tape when authoring a "widescreen anamorphic" 16:9 SD DVD (original aspect ratio is 14:9)?

    I just received the masters for a new SD DVD. I would like to author a "widescreen anamorphic" SD DVD horizontally squeezed widescreen image stored in a standard 4:3 aspect ratio DVD image frame. (On 4:3 displays, mattes should preserve the original aspect ratio. On 16:9 displays the image will fill the screen at the highest possible resolution.)
    Below I've listed the specs of the Digi Beta master tapes the producers have sent to me for digitizing. I'd like to know this: What are the ideal specs for a DigiBeta master tape when authoring a widescreen anamorphic SD DVD, using material with an original aspect ratio of 14:9?
    I've also listed my guesses below. Please let me know if my guesses are right. If not, please suggest alternatives (and if possible explain why.)
    TECHNICAL SPECIFICATIONS OF EXISTING MASTER:
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: NTSC - CCIR 601
    Frame Size: 720 x 480
    Anamorphic: Full-Height Anamorphic (16:9 image displayed in letterboxed, non-distored 4:3)
    Display Format: 4:3 Letterbox
    MY GUESS AT IDEAL TECHNICAL SPECIFICATIONS (for a DigiBeta, that is):
    Tape: DigiBeta
    Original Aspect Ratio: 1.55 (14:9)
    Vid Rate: 29.97 fps
    Pixel Aspect: Square
    Frame Size: 720 x 540
    Anamorphic: YES
    Display Format: 16:9 Anamorphic (horizontally squeezed widescreen image)
    Please feel free to ask for clarification or further information you need to answer my question.
    Thank you so much in advance for your help!
    Best, Noetical.
    BTW, I can't wait for the day when everything has gone digital and we get digital intermediates instead of tapes to digitize!

    Hi Nick...thanks for taking the time to reply to my question.
    Nick Holmes wrote:
    What you have there is a mess.
    NTSC pixels are never square.
    NTSC is 720x486, even when it is Anamorphic.
    You shouldn't be using an already letterboxed master to make an Anamorphic version. Get the master that was made before the letterboxing stage.
    When you make an Anamorphic DVD it should display as 16:9 full screen automatically on widescreen TVs.
    The same DVD will automatically letterbox on 4:3 TVs.
    Um yeah...duh. That's exactly what I was trying to explain in the preface of my question. I'm sorry if I didn't make it clear...all these things you mention are the reasons I'm putting together a list of the technical specs of the DigiBeta I need so I can have them send that instead of the stupid letterboxed version. 
    Look, I'm sending this request to some intern at their offices in England, asking for a master with which I can make an Anamorphic DVD. They already sent me this master, which as you and I both agree is an idiotic asset to use for these purposes. As such, I was hoping for advice on a more precise way of requesting the master that I need than asking for "the master that was made before the letterboxing stage." Upon reflection, perhaps I'll just do that. If you or anyone else has a suggestion about something I should add to my request that would improve the odds of them sending the tape I need, please repond. Thank you!
    BTW, It's been a long time since anyone has responded to something I've written or said as though I'm an idiot. I remember now that I don't really like it. (Moving along...)

  • How to find out what are the interfaces used for Job and Job Codes

    HI All,
    I just wanted to know how do we find out what are the interfaces used for Job and Job codes .
    Thanks In Advance
    Sunny

    Hi,
    Here is an idea for your request.
    Basically you can create a simple query on multiprovider 0TCT_MC01.
    Filter: you can use a variable for restriction of time ( calday, or calmonth) since you should be interested for a time period.
    Choose following characters into your objects:
    InfoProvider ( 0TCTIFPROV )  - you can create a variable for choosing infoprovider before query runs.
    *Tp.[Type of BI Application Object] 0TCTBISOTYP  = filter this with 'QUERY' or whatever your need is.
    *BI Application Object 0TCTBISBOBJ,  ( this will give you the name of the queries)
    In key figures choose,  Count for BI Appl. (0TCTWTCOUNT).
    (number for query run)
    Create a condition , for top 20.
    Hope this helps.
    Derya

  • What are the jars required for prepare portlet tool?

    what are the jars required for prepare portlet tool which converts portlets to .portlet.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are the roles required for MSS

    What are the roles required for MSS in R/3.
    I have created ESS roles. But need to find for MSS.
    I am able to see the PERNR in ESS on portal which created in R/3.
    I need to get my staff on portal.
    What config is required for this.
    MSS User.

    HI
    you will  have to create manager as portal role and assigned to them  necessary worksets containing necessary worksets  look into the PCD in migrated content and line *?? folder you will have necessary ESS and Mss packages. and all configs is related to iviews system properties and transactions  and applications you need to do it .please do not forget to give points
    with regards
    subrato kundu

  • What are  the input parameters for Function Module

    Dear Experts,
    I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
    For that i want to write a Generic Datasource with Function Module.
    audat
    bukrs
    vkorg
    vtweg
    spart
    aurat
    auart
    netwr
    mwsbp
    kschl zedp(consition type)
    kschl zvat(condition type)
    ksch   zcst(condition type)
    matkl     material group
    Here what are the Input parameters for Function Module.
    Thanks in Advance.
    Srinivasan.

    Srinivasan-
    For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
    Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
    Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
    Let me know how it goes.
    -Bhushan.

  • What are the steps requried for r/3 to xi and xi to r/3 configuraiton ?

    Hi Experts
    What are the steps requried for r/3 to pi 7.1 and pi 7.1 to r/3 configuraiton ?
    Thanks & Regards
    G.Praveen Kumar
    Edited by: praveen.tecnics on Apr 1, 2009 4:51 PM

    In case of RFC already signature will be defined in R/3 itself the same will there in PI too after importing .
    In case of idoc also you just need to import for the usage and can be used depending on scenario
    if the above answers doesnt suite your question then can you post query in detailed way
    In case of Configurations
    RFC destination types differ for idoc and RFC
    in idoc SM59 Type 3 conection you need to create
    for RFC you need Type T connection
    HTH
    Rajesh

Maybe you are looking for

  • DVI HDMI Poor picture quality, grainy / combing

    Hi Guys, Have just purchased a 26" Samsung LCD and have it connected to my G5 via a DVI-HDMI cable. However, full-screen playback on the monitor from FCP looks really poor- very grainy, with lots of combing (Note: the LCD autodetected a 50hz/1920x108

  • I am unable to find the Firefox button referred to in the following: At the top of the Firefox window, click on the Firefox button and then select Options

    Every instruction Mozilla offers to find or to do something contains a term or a phrase that is indeciphrable. I have been trying to change "Cookie Settings" so of course Mozilla advises me to click the Mozilla button at the top of the page. And of c

  • Download to Excel Function in ALV

    Hai Friends, I am using the following methods to download the report to an Excel Sheet from ALV. CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_SAVE_DIALOG CALL FUNCTION 'GUI_DOWNLOAD' The report is downloaded to Excel but the Column names are not displa

  • Apple TV interference

    Hi There! I just purchesed Apple TV yesterday. I was surprised to see that when connected to my new Samsung TV a very disturbing flashing on the middle of the screen keep jumping up. I have a quality hdmi cable. I have tried connecting via lan to ele

  • ABAP Program : Execution problem

    Hi Guys! I have a problem during the execution of a program. I’ve created a new program that merges two programs into one program named ZWORXX0020XX with t-code ZWOXX30XX.I've run the program via SE38 (ABAP Editor) and everything's fine…then when i r