What are the tables PHO and LOC of OIM Schema?
Hi,
In the schema documentation of OIM tables you have the following description for the tables PHO and LOC:
LOC - Holds information about locations
PHO - Holds all communication addresses for this contact -- e.g., contact telephone numbers,fax numbers, e-mail, etc.
When those have have some records? I haven't seen yet any form ou function where I can put some information like that.
I don't have any problem with them and it is just for curiosity. As I understand the OIM User Model, I thought those tables were part of OIM User Model, where:
Organization (field ACT_Key of USR table)
Location (I guess table LOC but it is always empty in my env). There is a field USR_LOCATION but it is not shown by default.
User Group (all groups a user is member are in the USG table)
User Defined Fields (all fields start with USR_UDF of USR table)
Manager (USR_MANAGER that is alwasys empty and USR_MANAGER_KEY that has the Key of User's Manager)
Organization (ACT_KEY of USR table)
Contact Information (I guess it is the table PHO)
Thanks,
Renato.
They probably serve no purpose anymore but might have been used at some point during the life cycle of the product.
-Kevin
Similar Messages
-
What are the tables rfpdo and rfpdo1?
what are the tables rfpdo and rfpdo1?
wht are these fields?
rfpdo-allgstid
rfpdo1-allgfaelLook at <a href="http://help.sap.com/saphelp_46c/helpdata/en/40/5f3275e24bd111950d0060b03c6b76/frameset.htm">Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA</a>
<i>Data Collection Programs for FI-GL, FI-LC, CO-OM and CO-PA
Description
1. Data retrieval from the FI general ledger With the report RFBILA00, data from the balance sheet and the P+L statement can be transferred to SAP-EIS. Detailed information on this is stored with the corresponding parameter of the report RFBILA00 (RFPDO-BILA_EIS).
2. The interface to FI-LC has been revised and the sender structure enhanced. AS sender field names were changed, it is necessary to adapt transfer rules created in release 2.2. Detailed information on this interface is contained in the online help for transfer program RGCEISS1.
3. CO-PA data can be transferred into SAP-EIS using a basic report. More information on this can be found in the Implementation Guide of SAP-EIS.
4. Data from CO-OM can be transferred to SAP-EIS using Report Writer reports. Since reports must fulfill certain conditions for the data transfer, standard reports in the report group '1EI' are delivered for CO-CCA. From the same group, you can define reports which transfer data from CO-OPA to SAP-EIS. You will find more information on this in the implementation guide.</i>
Regards -
What are the tables and fields in fico & sd module
what are the tables and fields in fico & sd module
Hi,
<b> Sales and Distribution:</b>
Customers KNA1 General Data
KNB1 Customer Master Co. Code Data (payment method, reconciliation acct)
KNB4 Customer Payment History
KNB5 Customer Master Dunning info
KNBK Customer Master Bank Data
KNKA Customer Master Credit Mgmt.
KNKK Customer Master Credit Control Area Data (credit limits)
KNVV Sales Area Data (terms, order probability)
KNVI Customer Master Tax Indicator
KNVP Partner Function key
KNVD Output type
KNVS Customer Master Ship Data
KLPA Customer/Vendor Link
Sales Documents VBAKUK VBAK + VBUK
VBUK Header Status and Administrative Data
VBAK Sales Document Header Data
VBKD Sales Document Business Data
VBUP Item Status VBAP Sales Document Item Data
VBPA Partners
VBFA Document Flow
VBEP Sales Document Schedule Line
VBBE Sales Requirements: Individual Records
SD Delivery DocumeLIPS Delivery Document item data, includes referencing PO
LIKP Delivery Document Header data
Billing Document VBRK Billing Document Header
VBRP Billing Document Item
SD Shipping Unit VEKP Shipping Unit Item (Content)
VEPO Shipping Unit Header
<b>Financial Accounting</b>
FBAS Financial Accounting Basis
BKPF Accounting Document Header BUKRS / BELNR / GJAHR
BSEG Accounting Document Segment BUKRS / BELNR / GJAHR / BUZEI
BSIP Index for Vendor Validation of Double BUKRS / LIFNR / WAERS / BLDAT /
Documents XBLNR / WRBTR / BELNR / GJAHR / BUZEI
BVOR Inter Company Posting Procedure BVORG / BUKRS / GJAHR / BELNR
EBKPF Accounting Document Header (docs from GLSBK / BELNR / GJHAR / GLEBK
External Systems)
FRUN Run Date of a Program PRGID
KLPA Customer / Vendor Linking NKULI / NBUKR / NKOAR / PNTYP
/ VKULI / VBUKR / VKOAR
KNB4 Customer Payment History KUNNR / BUKRS
KNB5 Customer Master Dunning Data KUNNR / BUKRS / MABER
KNBK Customer Master Bank Details KUNNR / BANKS / BANKL / BANKN
KNC1 Customer Master Transaction Figures KUNNR / BUKRS / GJHAR
KNC3 Customer Master Special GL Transactions KUNNR / BUKRS / GJAHR / SHBKZ
Figures
LFB5 Vendor Master Dunning Data LIFNR / BUKRS / MABER
LFBK Vendor Master Bank Details LIFNR / BANKS / BANKL / BANKN
LFC1 Vendor Master Transaction Figures LIFNR / BUKRS / GJHAR
LFC3 Vendor Master Special GL Transactions LIFNR / BUKRS / GJHAR / SHBKZ
Figures
VBKPF Document Header for Document Parking AUSBK / BUKRS / BELNR / GJHAR
FBASCORE Financial Accounting General Services Basis
KNB1 Customer Master (Company Code) KUNNR / BUKRS
LFA1 Vendor Master (General Section) LIFNR
LFB1 Vendor Master (company Code Section) LIFNR / BUKRS
SKA1 G/L Account Master (Chart of Accounts) KTOPL / SAKNR
SKAT G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR
Description)
MAHNS Accounts Blocked by Dunning Selection KOART / BUKRS / KONKO / MABER
MHNK Dunning Data (Account Entries) LAUFD / LAUFI / KOART / BUKRS /
KUNNR / LIFNR / CPDKY / SKNRZE /
SMABER / SMAHSK / BUSAB
FI-GL-GL (FBS) General Ledger Accounting: Basic Functions- G/L Accounts
SKAS G/L Account Master (Chart of Accounts SPRAS / KTOPL / SAKNR / SCHLW
Key Word list)
SKB1 G/L Account Master (Company Code) BUKRS / SAKNR
FI-GL-GL (FBSC) General Ledger Accounting: Basic
Functions - R/3 Customizing for G/L Accounts
FIGLREP Settings for G/L Posting Reports MANDT
TSAKR Create G/L account with reference BUKRS / SAKNR
FI-GL-GL (FFE) General Ledger Accounting: Basic
Functions - Fast Data Entry
KOMU Account Assignment Templates for G/L KMNAM / KMZEI
Account items
FI-AR-AR (FBD) Accounts Receivable: Basic Functions - Customers
KNKA Customer Master Credit Management : KUNNR
Central Data
KNKK Customer Master Credit Management : KUNNR / KKBER
Control Area Data
KNKKF1 Credit Management : FI Status data LOGSYS / KUNNR / KKBER / REGUL
RFRR Accounting Data A/R and A/P RELID / SRTFD / SRTF2
Information System
FI-BL-PT Bank Accounting: Payment (BFIBL_CHECK_D) Transactions General Sections
PAYR Payment Medium File ZBUKR / HBKID / HKTID / RZAWE /
CHECT
PCEC Pre-numbered Check ZBUKR / HBKID / HKTID / STAPL
FI-BL-PT-AP(FMZA)Bank Accounting: Payment Transactions Automatic Payments
F111G Global Settings for Payment Program for MANDT
Payment Requests
FDZA Cash Management Line Items in Payment KEYNO
Requests
PAYRQ Payment Requests KEYNO
Hope this solves your concern...
Regards,
Habeeb
Assign points if helpful -
What are the table names for CRM and APO?
hi friends,
what are the table names for CRM and APO?
Regards
suneel.hi Suneel,
check in crm forum
Re: SAP-CRM Tables
BUT051 BP Relationship: Contact Person Relationship
Similar to BUT050 , additionally contains Contact Persons Address data
BUT0BK Business Partner: Bank Data & Details
BP Number, Bank Key, Bank Country Key, Bank Account Number
BNKA Bank Master Data
BUT100 BP: Roles
ADR2 Telephone Numbers (Business Address Services)
ADR6 SMTP Numbers (Business Address Services)
Contains Email Id of the BP.
ADRC Addresses (Business Address Services)
BPs Complete Address Details- City, Country, Post Code, District, Street, Title No Etc
TSAD3T Table containing the Title text against a Title No.
COMM_PRODUCT Master Table for Product
CRMM_BUAG Master table for Business Agreement
CRMM_BUAG_H Header Data for Business Agreement such as Tax Category, Tax Characteristic, Form key, Business Agreement Class. Data in this table correspond to ISU CRMD_ORDERADM_H Contains the Header Information for a Business Transaction.
Note:
1. It doesnt store the Business Partner
responsible for the transaction. To
get the Partner No, link it with
CRM_ORDER_INDEX.
2. This table can be used for search
based on the Object Id(Business
Transaction No).
CRMD_CUSTOMER_H Additional Site Details at the Header Level of a Business Transaction
CRMC_PROC_TYPE Master table Business Transaction Type
CRMC_PARTNER_FCT Definition of Partner Functions
SCPRIOT Priorities for Activities with priority text.
CRMC_PROC_TYPE_T Text for a transaction type
CRMC_ACT_OBJ_T Objective Number and Text for Activities
TJ30T All the status code and text
CRMC_PR_ASSIGN : Transaction Type and its Transaction Type Object.
IBIB : Installed Base/Ibase
IBIN : Installed Base Components
COMM_PRODUCT : Products
CRMC_T077D : customer account groups
CRMD_ORDERADM_H (for header) CRMD_ORDERADM_I (Item data)
CRMD_ORDERADM_H Business Transactions CRM
CRMD_ACTIVITY_H Activity
CRMD_OPPORT_H Opportunity
BUTOO : Customer details
BUT001 BP: General data II
BUT100 BP: Roles
BUT150 BP relationship: Attribute table (test
different
BUT_HIER_TREE Business Partner Group Hierarchy
CDBC_T_PRODUCTID Mapping: Product Id
CDBD_ORGMAN Business transaction - organizational unit -
set
COMC_PRODUCT General Product Settings
COMC_R3_FIELDS Assignment of R/3 material master fields to
CFOP
COMM_CATEGORY Category
COMM_CFGMAT Basic Data for Materials
COMM_HIERARCHY Category Hierarchy
COMP_TYPES Hierarchy Tool: Comparison Type Check
Table
CRMC_CPRICPROC Customer Pricing Procedures
SMOKVBEZ15 Assignment employees to positions
CRMMLSGUID: GUID entry (should match GUID in CRMPRLS)
CRMM_BUT_CUSTNO : Also GUID table (GUID here should match GUID in R/3 table CRMKUNNR)
SMOFSUBTAB : Mapping & Parameters
SMOFDSTAT : Download Monitor (R4AM1)
SMOFFILTAB : Filters (Should match filters in R3AC1 & R/3 Table CRMFILTAB)
SMOFOBJECT Definition of Objects for Download
SMOFOBJPAR Parent Objects of an Object in Table
SMOFPARSFA Middleware Parameter
SMOFQFIND Queue Finder Table for MW-Queue finder
SMOFTABLES Definition of Tables for Download -
What are the delta mechanisms and tables used for Lo Extraction & COPA
Hi all
what are the delta mechanisms and tables used for Lo Extraction & COPA.
please explain clealry.
Thanks & Regards,
JamesJames,
Please go through Roberto's weblog :
/people/sap.user72/blog/2005/02/14/logistic-cockpit--when-you-need-more--first-option-enhance-it
Anyways,
As you know LO cockpit consists of different modules(MM, PP, SD, etc)
They are called appl components. Each of them have a number (eg.MM=02) and for each appl comp they might be different Data sources and for each DS they might be different tables. So, unless you be specific we cant tell a specific table for a DS.
coming to the delta mechanisms, there are " direct delta, queqed delta and serialized delta".
Copa is based on the oepration concern. it can be created on " accouting based" or "costing based".
Assign points if helpful
Kalyan -
What are the tables will update while loading Master data ?
Hello Experts,
What are the tables will update while loading Master data ? And requesting you to provide more information about Master data loading and its related settings in the beginning of creation infoobjects.It depends upon the type of Master data u r loading....
In all the master data loadings, for every new value of master data an SID will be created in the SID table /BI*/S<INFOOBJECT NAME> irrespective of the type of master data.
But the exceptional tables that get updated depending on the type of master data are.....
If it is a time Independent master data then the /BI*/P<INFOOBJECT NAME> table gets updated with the loaded data.
If it is a time dependent master data then the /BI*/Q<INFOOBJECT NAME> table gets updated with the loaded data.
If the master data is of time Independent Navigational attributes then for every data load the SID table will get updated first and then the /BI*/X<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
If the master data is of time dependent navigational attributes then for every data load the SID table will get updated first and then the /BI*/Y<INFOOBJECT NAME> table gets updated with the SID's created in the SID table (NOT WITH THE MASTER DATA).
NOTE: As said above, For all the data in P, Q, T, X, Y tables the SID's will be created in the S table /BI*/S<INFOOBJECT NAME>
NOTE: Irrespective of the time dependency or Independency the VIEW /BI*/M<INFOOBJECT NAME> defined on the top of /BI*/P<INFOOBJECT NAME> & /BI*/Q<INFOOBJECT NAME> tables gives the view of entire master data.
NOTE: it is just a View and it is not a Table. So it will not have any physical storage of data.
All the above tables are for ATTRIBUTES
But when it comes to TEXTS, irrespective of the Time dependency or Independency, the /BI*/T<INFOOBJECT NAME> table gets updated (and of course the S table also).
Naming Convention: /BIC/*<InfoObject Name> or /BI0/*<InfoObject Name>
C = Customer Defined Characteristic
0 = Standard or SAP defined Characteristic
* = P, Q, T, X,Y, S (depending on the above said conditions)
Thanks & regards
Sasidhar -
What are the tables used for ACR & Master data daemon job?
Hi Experts,
What are the tables used in the backend for ACR & Master data daemon jobs. I would like to see the details of CHANGERUNMONI or ACR/Hierarchy Change run.
Kr,
PraveenHi Praveen,
Have you tried these tables BALHDR, BALDAT and BALOBJT for checking master date daemon delta status. It may not give you complete details. but definitely helps.. If you find any more details please do let me know..
Thanks,
Bharath -
What Are the Tables in new oracle 10g express
Hi guys,
I am new at oracle and I just installed the Oracle 10g express. after login to the oracle by SQL Developer I noticed there are lots of tables in table folder which some of them come with $ and some not! can you please let me know what are these tables for? are they like system tables in SQL Server? if so then what are the tables under
-->Other Users/System/Tables?
I am lost here and I can't figure out what are the Other Users? are they like databases? I tries to google them but I couldn't find any thing
Thanks a lothttp://download.oracle.com/docs/cd/E11882_01/server.112/e16508/toc.htm
http://download.oracle.com/docs/cd/E11882_01/server.112/e17110/toc.htm
SELECT USERNAME FROM ALL_USERS;
USER/SCHEMA are to Oracle; what database is to SQL_Server
Edited by: sb92075 on Apr 22, 2011 5:53 PM -
How to see what are the Tables avialable in DataBase
Hi ,
Is it possible to see what are the tables avialable in the Data base (I am using Oracle 10g Client )
Thanks in advance .user672373773 wrote:
Hi ,
Is it possible to see what are the tables avialable in the Data base (I am using Oracle 10g Client )
Thanks in advance .Learning where to look things up in the documentation is time well spent investing in your career. To that end, you should drop everything else you are doing and do the following:
Go to tahiti.oracle.com. Drill down to your product and version.
Spend a few minutes just getting familiar with what is available here. Take special note of the "books" and "search" tabs. Under the "books" tab you will find the complete documentation library.
Spend a few minutes just getting familiar with what kind of documentation is available there by simply browsing the titles under the "Books" tab.
Open the Reference Manual and spend a few minutes looking through the table of contents to get familiar with what kind of information is available there, especially the initialization parms and the data dictionary views.
Do the same with the SQL Reference Manual.
Do the same with the Utilities manual.
Then set yourself a plan to dig deeper.
- Read a chapter a day from the Concepts Manual.
- Look in your alert log and find all the non-default initialization parms listed at instance startup. Then read up on each one of them in the Reference Manual.
- Take a look at your listener.ora, tnsnames.ora, and sqlnet.ora files. Go to the Network Administrators manual and read up on everything you see in those files.
- When you have finished reading the Concepts Manual, do it again.
Give a man a fish and he eats for a day. Teach a man to fish and he eats for a lifetime.
================================= -
What are the tables/view used to Compute Dependecies Report
Hi,
what are the tables/views we have in APEX, which is used to create the Compute Dependecies Report
Home -> Application xxxxx > Application Reports > Shared Components > Database Object Dependencies
thanks,
DeepakHi Scott,
thanks for the quick response.
So my question is then...
I want to create a APEX Report which will give me the following information.
1. Application and all the Pages associated with it, which I am getting from apex_applications and
apex_application_pages. This is OK
2. List of all the Database Objects (Table/View) which the individual page is using, I mean relation between Page ID and database object. HOW to get that???.....(I want for each individual page, the list all the database objects (tables/views), which that page is using)
Thanks,
Deepak -
What are the tables for Partner Fuction regarding the Vendors Purchasing ?
Hello Gurus,
What are the tables for Partner Fuction regarding the Vendors Purchasing Organisation. I need the Partner Function Key, Parner Function Name, Number and the Name of the Number.
Thanx in advance,
RamonaHi Jürgen,
I know that table but it is only showing me the technical name of the Partner Function and I need also the rest: the text(name), number and the number name (text). I presume there are other tables for those infos.
I am not sure if I understand what are these. I just want the table to upload the data to BW. -
If we open a transaction i need to find what are the tables used
hi gurus
can anyone suggest me
if we open a transaction liek va01
i need to find what are the tables used
what are the fields used in that transaction
i need a list .
thanks®ards
kals.Hi
you can find all those details in transaction variant,
go with SHD0 ( numerical 0) and then enter your transaction code and enter transaction variant name and then select that
Select the program SAPMV45A and go CHANGE WITH PROCESSING (F6),
there you can find the list of fields and field names.
reward points if usful.
thanks and regards,
muralidhar -
What are the tables getting updated
Dear,
can anybady tell me the what are the table getting updating while doing J1IEX (CAPTURE AND POST). like RG23A, RG23C,RG1,PLA.......
THANKS
MRSThanks Ravi,
Can u help me some more input like how to see the RG23A value and RG23C,PLA.
what Is the any t code to the know the status?
Thanks
mrs -
What are the tables related to Goods receipt details
Hi,
Please tell me the GR related data base tables.
What are the tables related to Goods receipt details
Regards,
Sunil Kumar.T
Edited by: sunil kumar on Apr 28, 2008 8:49 AMHi,
If you want to know tables which are related to transaction.
Use recording through SHDB tcode.
go to shdb tcode
after enter name of your zname.
after for which transaction you are doing recording enter that tcode here migo.
after press start recording.
then enter data into fields after at last save and back.
then it goew to control recording session screen
after press program for create.
then enter attributes ,select source code after save your code.
Using this tables and which fieldsa you are using for perticular requirement.
this is an easy procedure to know tables and fields.
or
USE ST05 tcode by entering single filed into application.
These two approaches are usefull but go to first one if you knew which data you have to entered.
Otherwise go to st05.
*Reward points
for goods receipt tcode by entering data -
What are the surrogate key and row_number( )
what are the surrogate key and row_number( ) function, and why do not we always make the row_number a primary key in the table.
Mohannad,
we just try to safe your efforts and to prevent common
mistakes you can make.
Look here.
Your requirement is to avoid gaps in sequence.
OK. But it means you HAVE to lock your sequence
exclusively until you commit transaction.
Also, it means you have to rollback sequence
number to original value if you rollback you
entire transaction.
SQL> create table my_tab (id number);
 
Table created.
 
SQL> create table numer_tab (id number);
 
Table created.
 
SQL> insert into numer_tab values(0);
 
1 row created.
 
SQL> create or replace trigger
2 tr_no_gap
3 before insert on my_tab
4 for each row
5 begin
6 /* Let's lock sequence in exclusive mode */
7 update numer_tab set id = id + 1
8 returning id into :new.id;
9 end;
10 /
 
Trigger created.Now I havn't to worry about gaps:
Fisrt session:
SQL> insert into my_tab values(null);
 
1 row created.because my next session is waiting:
SQL> insert into my_tab values(null);
 I do commit in first and second session -everything is OK:
SQL> commit;
 
Commit complete.
 
SQL> select * from my_tab;
 
ID
2
1Now I do the same but do rollback in 1th:
SQL> insert into my_tab values(null);
 
1 row created.
 
SQL> rollback;
 
Rollback complete.and commit in 2th:
SQL> insert into my_tab values(null);
 
1 row created.
 
SQL> commit;
 
Commit complete.No gaps:
SQL> select * from my_tab;
 
ID
2
3
1Now I will not lock sequence resource due a transaction:
SQL> create or replace trigger
2 tr_no_gap
3 before insert on my_tab
4 for each row
5 declare
6 pragma autonomous_transaction;
7 begin
8 /* Let's lock sequence in exclusive mode */
9 update numer_tab set id = id + 1
10 returning id into :new.id;
11 commit;
12 end;
13 /
 
Trigger created.And I repeate my last operation.
Both inserts execute immediately
1th
SQL> insert into my_tab values(null);
 
1 row created.2th
SQL> insert into my_tab values(null);
 
1 row created.Now I rollback the first and commit the second.
And what I see is the gap:
SQL> select * from my_tab;
 
ID
2
3
5
1We are just trying to explain what you will have to
pay the serious price of performance in the
absence of gaps and you will have the lack
of Oracle multithreading advantage in this case.
I doubt your customers will happy with that.
Rgds.
Maybe you are looking for
-
Hi iv been having this problem for a few months now my mac it keeps on freezing. the curser works but stays on the loading one (the rainbow circle) other than that not much els dose. at the time that this started i was on skype having a video chat an
-
Problem With FireFox 5.0
'''1)''' for some reason when i writing in the address bar it wont "automatically search" anymore it just browse History . '''2)''' when watching online via Megavideo after 10 minutes it stops reloading the movie. with browsers (Comodo Dragon ,IE9,Go
-
Hi, In the material master (warehouse mgmt1 view), we have two unit of measures defined. One is base unit of measure and the other is Unit of issue. 1. What is unit of issue and what it's used for? 2. Is it applicable only for materials issued from w
-
Hi, I m triggering the IDOC from R3 the message is reaching in MONI but it is failing in moni. I can figure out its a data problem but I am not sure because of which data the problem has come. here is my error message which is coming in moni. com.sap
-
I need help making a song in my library a ringtone in my i phone 5
i would like to make a song in my itunes library a ringtone