Where/How to get the initial set of loops

GarageBand is displaying the initial loops greyed out, and when I click one a dialogue comes up saying they're not installed. I'm given the option to Download now, later, or from disk. Since iLife came installed on my mac I have no disc. So's I select download now, and it shuffles me over to Software Update... which informs me that there are no new updates and quits itself. Attempting to re-open the dialogue in GB gives me a message saying that the download/install is underway, but there is no evidence of such.
So's... is there any way I can manually download and install these loops? Or, at the very least, remove the greyed out one from the library?
I'm suspecting that I refused this update early on or something... I've had my mac for about a year and a half but no need to use GarageBand until now.

http://www.bulletsandbones.com/GB/GBFAQ.html#noloops
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

How to get the initial (first) transaction

Hi, everybody.
I need to get the initial (or first) transaction, from which the current was called. Does anybody know how?
Example: Tr. FEBAN after some operations calls FB05, then in OPENFI-logic SY-TCODE = 'FB05'. How can I get 'FEBAN'.
Maybe there are some system functions?
Thanks.

Hi Aidar,
Unfortunately, there are some insurmountable barriers in SAP. When a transaction calls another one using CALL TRANSACTION, a new internal mode is created, that cannot see the first one, except when programs communicate explicitly between the 2 using the SAP memory (get parameter id, set parameter id), ABAP memory (export to memory id/import from...), shared memory.
Only Chen's answer makes sense here. You may also debug just before the CALL TRANSACTION 'FB05' or LEAVE TO TRANSACTION 'FB05' (by debug you can simply add a soft "breakpoint at statement" CALL TRANSACTION or LEAVE TO TRANSACTION to make the system halt automatically when the statement is reached) where you'll maybe find some data transferred to the memories I mentioned above, which you could then read from your code to know to say if it comes from FEBAN.
Sandra

How to get the record set into array?

Hi,
I want to get the record set into array in the procedure and do the processing of the array later in procedure.
below is the stored procedure i am working on:
procedure bulk_delete_group(p_group_id in Array_GroupListID) as
begin
for i in p_group_id.first..p_group_id.last loop
--Here I have to get the list of user id before deleting group
SELECT user_id into *<SOME ARRAY>* FROM group_members WHERE group_id = p_group_id(i);
DELETE group WHERE group_id = p_group_id(i);
--Process the user id array after group deletion..
end loop;
end bulk_delete_group;
Thanks in advance
Aditya

Something like this ->
satyaki>
satyaki>select * from v$version;
BANNER
Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 - Prod
PL/SQL Release 10.2.0.3.0 - Production
CORE 10.2.0.3.0 Production
TNS for 32-bit Windows: Version 10.2.0.3.0 - Production
NLSRTL Version 10.2.0.3.0 - Production
Elapsed: 00:00:00.20
satyaki>
satyaki>
satyaki>select * from emp;
 EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
 9999 SATYAKI SLS 7698 02-NOV-08 55000 3455 10
 7777 SOURAV SLS 14-SEP-08 45000 3400 10
 7521 WARD SALESMAN 7698 22-FEB-81 1250 500 30
 7566 JONES MANAGER 7839 02-APR-81 2975 20
 7654 MARTIN SALESMAN 7698 28-SEP-81 1250 1400 30
 7698 BLAKE MANAGER 7839 01-MAY-81 2850 30
 7782 CLARK MANAGER 7839 09-JUN-81 4450 10
 7788 SCOTT ANALYST 7566 19-APR-87 3000 20
 7839 KING PRESIDENT 17-NOV-81 7000 10
 7844 TURNER SALESMAN 7698 08-SEP-81 1500 0 30
 7876 ADAMS CLERK 7788 23-MAY-87 1100 20
 EMPNO ENAME JOB MGR HIREDATE SAL COMM DEPTNO
 7900 JAMES CLERK 7698 03-DEC-81 950 30
 7902 FORD ANALYST 7566 03-DEC-81 3000 20
13 rows selected.
Elapsed: 00:00:02.37
satyaki>
satyaki>create type np is table of number;
2 /
Type created.
Elapsed: 00:00:03.32
satyaki>
satyaki>Create or Replace Procedure myProc(myArray np)
2 is
3 i number(10);
4 rec emp%rowtype;
5 Begin
6 for i in 1..myArray.count
7 loop
8 select *
9 into rec
10 from emp
11 where empno = myArray(i);
12
13 dbms_output.put_line('Employee No:'||rec.empno||' Name:'||rec.ename);
14 end loop;
15 End myProc;
16 /
Procedure created.
Elapsed: 00:00:00.88
satyaki>
satyaki>
satyaki>declare
2 v np:=np(9999,7777);
3 begin
4 myProc(v);
5 end;
6 /
Employee No:9999 Name:SATYAKI
Employee No:7777 Name:SOURAV
PL/SQL procedure successfully completed.
Elapsed: 00:00:00.30
satyaki>Regards.
Satyaki De.

How to get the result set in batches

I have a query which results into large data. This data i want to display in a group of 20. After every 20 records i want to add header and footer to it.
Is it possible to get the result set data into batch of 20 ? means can i specify start and end index of query ?
regards
Manisha

What I am saying is that a big query with lots of
joins will probably be slow, and as such would be a
ripe candidate for batching the responses, if it were
not possible to speed/optimize it. Batching is nice
to look at for the user, but is not a solution for
performance problems. In essence it is irrelevant
that it adds a little performance deficit, as it
appears to be running a lot quicker, and gives more
feedback to the user.Then let me say it again....
- "Join" is a term that applies to a method of doing queries in the database....
- Query 1 which uses a join and returns 15 rows
- Query 2 which does not use a join and returns 1500 rows.
Given the above then Query 1 will provide better overall performance for the system than Query 2 in a properly configured database.
If it doesn't then the database is not set up correctly.
And again this will be irrespective of whether the query is scrollable or not.

How to get the initial state of JSF PAGE IN ORACLE ADF

Hi everybody
my Jdeveloper version is 12.1.3
I'm building my JSF pages based on a template that has a navigation pane which contains command navigation items , every one of them (command navigation items) appears as a link at runtime and calls a JSF page , I wish to get the initial state for any page when leaving it then entering such page again , and I would like to know what is the suitable place to write the code to do this task.
many thanks !

Clear the cache by adding the following to each jsf page.
<%
response.setHeader("Cache-Control","no-cache");
response.setHeader("Pragma","no-cache");
%>

How to get the variable set by c:set in Scriptlet ?

Hello,
I set up some variables by <c:set> and struts tag <bean:size>, and the values should be considered as integers. How can I use the variables in math expression?
When I try to use the variables in scriptlets, I got compile errors in the getAttribute lines.
My code:
<bean:size id="listSize" name="list" /> <c:set var="pageSize" value="${20}" />
<c:set var="pageBegin" value="${param.pageBegin}" />
<%
int ls = (Integer)pageContext.getAttribute("listSize");
int ps = (Integer)pageContext.getAttribute("pageSize");
int totalPages = (int)Math.ceil((double)ls / ps);
%>

xiaoxuan_li wrote:Hello,
I set up some variables by <c:set> and struts tag <bean:size>, and the values should be considered as integers. How can I use the variables in math expression?
When I try to use the variables in scriptlets, I got compile errors in the getAttribute lines.
My code:
<bean:size id="listSize" name="list" />
<c:set var="pageSize" value="${20}" />
<c:set var="pageBegin" value="${param.pageBegin}" />
<%
bq. int ls = (Integer)pageContext.getAttribute("listSize"); \\ int ps = (Integer)pageContext.getAttribute("pageSize"); \\ int totalPages = (int)Math.ceil((double)ls / ps);
%>I finally find the errors, I change the getAttribute() lines to the following, and the program runs well, although I'm still curious of if there is a better way to get the value of totalPages by using JSTL tags, instead of scriptlets.
<%
bq. {color:#ff0000}Number {color}ls = {color:#ff0000}(Number){color}pageContext.getAttribute("listSize"); \\ {color:#ff0000}Number {color}ps = {color:#ff0000}(Number){color}pageContext.getAttribute("pageSize");
%>

[6136] How-to get the initial IMPS client ?

Hi, I have a Nokia 6136 which supports IMPS but with presence capability only. The chat capability has been removed by the operator but apparently, according to its support, it is possible to get the original configuration from Nokia. Is there a way to get the full IMPS client (with chat and presence capabilities) OTA ? Thanks for your help. -- kael

Hi Aidar,
Unfortunately, there are some insurmountable barriers in SAP. When a transaction calls another one using CALL TRANSACTION, a new internal mode is created, that cannot see the first one, except when programs communicate explicitly between the 2 using the SAP memory (get parameter id, set parameter id), ABAP memory (export to memory id/import from...), shared memory.
Only Chen's answer makes sense here. You may also debug just before the CALL TRANSACTION 'FB05' or LEAVE TO TRANSACTION 'FB05' (by debug you can simply add a soft "breakpoint at statement" CALL TRANSACTION or LEAVE TO TRANSACTION to make the system halt automatically when the statement is reached) where you'll maybe find some data transferred to the memories I mentioned above, which you could then read from your code to know to say if it comes from FEBAN.
Sandra

865PE NEO2 need help on findout how to get the memory set to dual and a bit of overclocking

hello everyone all`s it is i need some advice how to find out that my motherboard is set right and my memory is set to dual. at the moment i have my memory 3200 512ram in DIMM 1 A and in DIMM 3 B can anyone tell me if this is right for my motherboard (865PE NEO2 ) and can anyone tell me the best setting to have to overclock my system at the moment i have 2.5 proccesor overclocked to 2.7.

Your memory is in the correct location for Dual Channel.
Btw, providing us your full system and PSU specs will be better for us to give you directions.

How to get the character set which i want it to be?

i confront a problem, when using jdbc to connect to oracle8i database on solaris; because i use getBinaryStream() to read from db in "byte" reading, seemly it would use default character set on OS or database(such as EUC,etc.), not which the client i want it to be. is there anyway to take control of such code writing(i mean to change the character set when i get byte out of database, thus the byte would use NLS_LANG the same as using sqlplus setting in user env)?

First of all read Note 581312 - Oracle database: licensing restrictions:
As of point 3, it follows that direct access to the Oracle database is only allowed for tools from the areas of system administration and monitoring. If other software is used, the following actions, among other things, are therefore forbidden at database level:
Creating database users
Create database objects
Querying/changing/creating data in the database
Using ODBC or other SAP external access methods
Are you trying this on the database server itself? If yes, then you need to install the hebrew codepages as well as hebrew fonts in order to display the data correctly.
Markus

How to get the initial name.

public class asd{
public static void main(String[] args){
asd dkd =new asd();
how to show the object's name(dkd)?

Are you trying to obtain the reference variable name is?
Here is an example:
String str = new String("God is real!"); // "str" would be the reference variable nameIf you call the toString() method you will won't get "str". You would get "God is real!". Look at my example below:
String str = new String("God is real!"); // "str" would be the reference variable name
System.out.println(str.toString());OUTPUT:
"God is real!"
If you do a to string on like this:
asd dkd = new asd();
System.out.println(dkd.toString()); The Output would look like this:
"asd@lfee6fc"
I'm not clear on what you mean by object name, but using the toString() method wouldn't be how I would get it. If you mean the Class name you could use the getClass().toString() methods to obtain the Class name. That would give you "java.lang.String" for the first example and the second ouputput would be "class asd".

From where can I get the complete set of keyboard replacement keys.

Hey guys
Can anyone tell me from where can I get all the keys for my macbook's keyboard uni body 15" mid 2010.
Regards

Google there are many
ebay
see
http://forums.macrumors.com/showthread.php?t=667097
http://www.thebookyard.com/apple_keycaps.php
http://www.replacementlaptopkeys.com/macbook-key.html

How to get the initial boot log [solved]

Hi, I would like to retrieve the initial log from the kernel when it startups , it seems that sometimes something fails but it happens to fast , and I can't see it correctly.
Any idea ?
Thanks.
Last edited by aclemente (2012-12-12 22:17:50)

aclemente wrote:
Hi, I would like to retrieve the initial log from the kernel when it startups , it seems that sometimes something fails but it happens to fast , and I can't see it correctly.
Any idea ?
Please search the wiki: almost everything you need has already been documented...

How to get the initial amount of a posted document?

Hi guys!
Upon posting a document, the amount of a G/L Account is automatically calculated (55,000.00) . From vbsegs it will be transfered to bseg table. And the value has been changed, the amount is divided by a tax code(12% VAT) = 49,107.14. How will I get 55,000 back without manually computing it? In what table or is there a standard bapi?
Points for helpful ideas. Thanks!

Hi Maui,
If you go to table S001, you would see the details of the sales figures divided into "Gross and Net". You can also obtain some information from table VBAP.
I hope the above helps.
Do not forget to award the points please.
Regards,
Jacob

Precalculation server how to get the initial "ready" status

Hi guys,
i have scheduled 50 workbooks over night in 5 minute distances. The precalculation server is one physical server with 3 registered precalc server. Multiinstance precalculation is started. And when i come in the morning i see in RSRD_Log
with red icon the message "The system searches for the next free preliminary calculation server" and also "No free precalculation servers found (' 100" and the last message "An active RFC server could not be found ". Before i went i restarted the server so the precalculation registrations should all be green and ready and in an initial state.
From 0 o clock till 7 o clock they are all red the registrations and from 8 o clock they are green again and work fine. How come?
Does a reboot not put them into initial state? Do i also have to clear the queue from RSPRECADMIN? From 50 scheduled workbooks just 10 reach their target via mail. What am i doing wrong?
Thanks and kind regards,
Murat

Hi Vikram,
there are no paralel processes defined they are all scheduled sequentially. They are 70 scheduled in 5 minute distances.
But no parallel processes. What could be the reason?
Thanks and kind regards,
Murat

Where/How to get the Virtual KPIs in Crystal Reports?

hellooo!
We are developing SSM7 reports using Crystal.
And we have this example scenario:
1. Two NONKPI variables defined via Cube Builder:
    NONKPI381_ACT/TAR Net Sales         100000
    NONKPI382_ACT/TAR Expenses          80000
2. Virtual KPI
    KPI380_ACT/TAR (Net Income Contribution) = (NONKPI381_ACT/TAR - NONKPI382_ACT/TAR)
No issue in PAS and standard front-end reports as they show the KPI380 = 20000 (and other calculations) perfectly.
However, we need a specific report showing an Objective and it's associated KPIs (e.g. KPI380*) and Initiatives. Apparently, the main FACT table CPMS_EA_DATA does not contain values for KPI380. I browsed all the CPMS tables but to no avail, I have not seen any relationships to at least calculate KPI380. Could somebody please give me some advise?
Cheers and Thanks,
Ron Almonte

Hi there!
If you are trying to read data directly from CPMS tables, then you won't find any measure data there. That data is stored in the Application Server... The CPMS_EA_DATA values there are only used as a datasource for the application server, those values are not used directly for the scorecard calculations.
I would advise you to consider the upgrade to version 7.5. With this version you are able to use either Web Services or ODBO to connect SAP BusinessObjects Strategy Management to other SAP BusinessObjects tools.
This way you will be able to easily access, for example, the details on the 'Context', 'Perspective', 'Objective', 'KPI' and 'Initiative', and to the respective measures 'Trend Status value', 'Status Value', 'Actual', 'Target' and 'Score'. You are also able to access more detailed information on the PAS model for any measure, so that you can build your reports on Web or CrystalI, your Dashboards on Xcelsius, etc, etc...
I have used the ODBO provider (available starting with 7.5 SP2) to create a Universe, and then with QaaWS I was able to make that data available for Crystal, which made it very easy to built a report without any coding
Hope this helps!
Best regards,
Ricardo Vieira
Edited by: Ricardo Vieira on Oct 15, 2009 10:21 AM

Where/How to get the initial set of loops

Similar Messages

Maybe you are looking for