Where is PS CS 6 analysis Manu?

I can not find analysis Manu in photoshop CS6 extended that I purchased today, where is it?

Hi cells counting,
In photoshop cs6 those commands are under Image>Analysis.

Similar Messages

Problem installing Analysis Services in Tabular Mode

I am trying to install Analysis Services in Tabular mode to a server where I have already installed Analysis services in Powerpivot mode and in regular mode. I am following the instructions below and when I get to the screen below the tabular mode
option is greyed out. What do I need to do?
http://blog.quasarinc.com/ssas/installing-sql-server-2012-analysis-services-tabular-mode/

Hi Racand,
Which editions of SQL Server 2012 you are using? The Tabular option is only available for Enterprise and Business Intelligence editions. Please refer to the link below to see the details.
Features Supported by the Editions of SQL Server 2012
If you have any questions, please point it out.
Regards,
Charlie Liao
TechNet Community Support

Did CUP risk analysis change with SP7?

Dear GRC experts,
I am pretty sure when we tested CUP 5.3 SP4 when doing risk analysis it would only show new risks caused by new roles selected in request (like Risks from Simulation Only YES in RAR). Exisitng risks for that user would not be shown.
Now with CUP 5.3 SP7 fix1 we get the existing risks shown as well not in any way related to the role(s) selected, which will be confusing to the role approvers. E.g. role request is display role, approver needs to run risk analysis and gets existing risks shown. He/she can not deselect roles to remove risks as only display role is in request. There might be no mitigating controls for those risks (creation of new mitigating controls is blocked). This would end up in requests with risks even though the requested role is not risk relevant, or even request gets stuck because no mitigatign control exists and config is set to do not allow approval of requests with risks.
Please confirm if indeed only new risks where shown in CUP risk analysis in previous support pack levels or rel. 5.2, or that I am mistaken and all risks where always shown at risk analysis in CUP.
Principally I think existing risks should be focus of GET CLEAN effort. Risk analysis in CUP should focus on preventing new risks at part of STAY CLEAN phase.

Hi,
When we run Risk Analysis for the user, it will show the existing violations as well as the violation which are there with new roles also.
When we click on Risk Analysis under Simulation tab we can find Risk Violation details.
Here I have a doubt, how to deselect violation role while approving request. I m unable to find that option. Please advice.
Thanks & regards,
KKRao.
Edited by: KKRao_2020 on Oct 9, 2009 9:22 AM
Edited by: KKRao_2020 on Oct 9, 2009 9:27 AM

OBIEE 11g - create dashboard with Answers Analyse and BI Publisher Repport

Hi there,
I have one question . I create dashboard in OBIEE 11g .In my dashboard have one analyse and one bip report .I create one prompt filter , that changes the both .But I wanted when i click in analysis and change it, this change is reflected in the Report . Is this possible?
Thanks

I am talking about object permissions in the catalog (eg. Folder permissions..). This is in addition to the permissions for the data source.
You need to be able to view the folders from where you can select the analysis as a data source in the BI publisher report.
Here is an excerpt from the Guide:
For a role to access an object in the catalog, the role must be granted Read permissions on both the object and the folder in which the object resides. Permissions can be granted at the folder level and applied to all the objects and subfolders it contains, or applied to individual objects.
To grant catalog permissions to a role:
Navigate to the Catalog.
Locate the folder or object on which you wish to grant permissions and click More. From the menu, select Permissions. Alternatively, you can select the folder and click Permissions in the Tasks region.
Thanks,
BIPuser

Profitable analysis and cost accounting doc

hi,
May i know why some of billing in vf03 only have cost accounting doc whereas some have both profitable analysis and cost accounting doc in document category when click accounting button.
thanks

Hi,
Please check the Sales Condition Types assigned to Value fields. May be some of your condition types are assigned to Value fields and some of are not. Go to KE4I.
Also check the PA Transfer Strcuture in KEI2, Whether relevant Cost Elements are assigned to Value Fields or not.
Regards,
Jigar

Long time to open workbook for first time

Hi,
I have a workbook with three queries . Performance of workbook is good when it was created for first time. It has additional 22 sheets with formulas and other sheets with values based on query sheets.
The problem starts after I close the existing session and open in another session when it takes 15 to 20 minutes to come up.But after that the book is slow even for single click button action.
Version of analysis 1.4.6
Win 7(64 bit)
Ms office 2010(32 bit)
Refresh on opening is disabled.
Few thing which I did:
>> I opened up task manager and did analyze wait chain, I found that excel.exe is waiting for splwow64.exe process.
>> I enabled logging at "debugging information" in support setting for workbook and checked things out in log file.
Found that
There was warning "AddSerializer failed (Command processors not initialized)
Looking at log file for events when book took time to open, I found that time stamp gap between following events"
-verbose: Working mode as serialized in document:'Local'
-verbose: Successfully deserialized system info from workbook XML
- verbose: ...its logs various properties of queries like query name,id etc"
and its immediate previous event of cache formula string is 20 mins.
>> in another session I opened a workbook with normal performance.Found above mentioned warning message and deserialization... information.
the difference in this case is that there is not delay in events.
Has anybody faced this issue? Any idea on deserialization of workbook xml in analysis.
Any idea where is metadata saved in analysis. is it in form of some hidden script object just as in BEx 7.0
Thanks
Pramod.

Hi Pramod,
Since you have several sheets in this workbook, have you checked the number of custom styles?
Please check the SAP note http://service.sap.com/sap/support/notes/1899658
According to the note, too many styles slow down Analysis for Office.
The note also contains a macro that you can run on your workbook to delete the custom styles if you want to check.
Regards,
Filipe

No data found due to cost element adding leading values in report

Hi Experts,
I have an issue where when the run the analyser with some values in variable screen it is displaying the output correctly in analyser tool. I am filtering the cost element with a single value for ex 4545000 and I have kept that in rows . Still the report is working fine. But then when I go back to variable screen and change the input for ex instead of period 3 if I change it to 4 , output is null since the cost element is adding leading values to the existing value in the filter and displaying no result. for ex 4545000 is getting added with controlling area 0050 and its searching for 00500004545000 and since this is not the cost element value its not displaying output..
Any ideas how to rectify this or is it a analyser tool issue..
Thanks in advance
Kishore

Hi,
In my system it looks like this:
Note that superior infoobject to 0costcenter is 0co_area
Hope this helps,
Leszek

Download Button in Web Report

Hi Experts,
I want to Add a Click Button on my Web Template. Which would let me download the report in Excel File.
On click of the button it should show my target place as desktop or download folder.
Do anyone know whether we have any option in Bex WAD.
Please help.
Thanks

Hi,
Thanks for your reply,
Can you tell me where do I find that analysis web item in WAD3.5 please.
Please explaine me in details how do I achieve it.
Thanks
Edited by: MO AHMED on Dec 14, 2009 11:16 AM

Creative MediaSource Organizer hangs while importing tracks to PC Music Libr

I purchased a NOMAD Jukebox Zen 60GB sometime ago and I finally got into putting my music into it. I downloaded and installed Creative Media Source version 2.03.29. I have all my music files in a folder in my roommates desktop computer available on our home network, because my laptop hard dri've is not big enough to store all files. I click on the Import button and select Import Tracks, and the Creative Import Wizard dialog pops up. I select the mapped network dri've where all my music files are and click Add Folder, and the wizard correctly finds all my music files and lists them on the list on the right side.
First time I tried this, I tried importing all my music which meant it would add 000 files. I clicked Continue and the wizard displayed "Gathering files info and checking file existence in PC Mucis Library..." with the progress bar moving a little. The farthest the progress bar got to was under the th of the "Gathering..." Since I think I have a lot of music files, I waited for about 5 hours but the progress bar did not move further. I checked the task manager, the Applications tab said Creative Import was Running, and the Process tab indicated that the CTImport.exe process was using 98% CPU. I tried other times importing less music (5000 files, 000 files, as low as 500 files), and the progress bar seemed to move a little further with lower number of files, but I was still feel I waited longer than I should have and the process did not finish (I think I waited half-hour to an hour for 500 files). My laptop is not slow or very old, I use video conferencing applications and etc without a problem. Is this a known issue, any suggestions on how I can load my music to my PC Library to download to my jukebox player?
Any help is appreciated. Thanks

EAG wrote:
Thanks everyone for the replies. Allow me to add more information and make some more comments. I did try doing in batches. The?smallest number of songs I had tried was 500 and that seemed to?hang. I then tried 250?and that?worked at first. I got all excited, I would do them all 250 at a time if necessary, but when I tried importing the next 250 files?it got "stuck". Probably in the same place that it did when I tried 500 together.
This might suggest a corrupt tag/file. See if you can narrow down where it is and then analyse the file with something like MP3 Library.
But SSR suggestion made me realize that I can add the track/files without using the import feature, by just dragging and droping from My Computer mapped dri've. It looks like I can add the files to the PC Music Library or the MP3 directly by drag and drop. I was hoping to use the PC Music Library first, so that I could fix files that are not tagged properly, rate some music,?set the Genre (I have a lot of foreign music, so I could differentiate them by nationality in the Genre), etc and them I could also use when transferring to my memory based/jogging mp3 player as well. But it looks like I might be able to fix the tags directly on the player as well (I have a feeling this might be slower, take more time). I can drag single items (I'll do one by one if that's what it takes), but I saw that I can also drag multiple items (so that will cut down manual labor). I just hope that it won't get stuck once I get close to droping the 500th item. I didn't get a chance to try because I had to come to work, I'll try later and let everyone know.
Don't edit the files on the player. If you copy the files back to the PC the changes will be lost unless you use a special update feature in MediaSource 3.

Replacement of FORECAST DELIVERY DATE with DATE OF FIRST RECEIPT

Please help me in my scenario below and post your valuable comments-
My Scenario is like -
For example, In REPORT, For the item 10 of the order 4700035361 our FIRST RECEIPT DATE is in march (14/03/2011) and FORECAST DELIVERY DATE is in december (30/12/2011). This purchase order item was completely received.
Requirement is like---
Associated cube is ZCUIMP01.
(1) The evolution will consist of replace the FORECAST DELIVERY DATE with FIRST RECEIPT DATE of the item.
(2) The period (Fiscper and Fiscyear) will also be modified.
(3) Hence the calculation of the YTD will take into account the order and its receipt date.
(4) The adjustment of the history will be necessary for the year 2011.
Can anyone suggest, from where i should start my analysis (Should it be Infocube level??).
What will be the approach to fulfill all the above mentioned requirement (Should we think about Remodeling concept for creating new data model, if yes then how to do?).
Please reply asap, it will be great help for me.
My advance thanks to you.
Thanks & Regards
Rupali Singh

Hi Rupali,
As I understand there is a business change that you need to justify in our report. Unfortunately your explanation of the design has a considerable gap to visualize. In any case, if you need help on to how to approach such a change -
1. Understand the business change, its purpose and its imapct on your current design and the report.
2. Understanding the purpose is very important since you will then be able to find workarounds, redesign as per the change required.
3. Start from the query and check if your replacement of characterisitics with new characteristics can be obtained using functions like Replacement path, attributes, customer exits, etc. Changing a query/creating a new report on the existing model is the most feasible option.
4. If not, try exploring option to keep the design untouched, and creating a new InfoObject/DSO like structure to capture the date modifications, etc which then can be used on a MultiProvider.
Hope the above helps!
Regards,
Kunal Gandhi

Setting a Custom Scale and Measuring in Photoshop CS5 Extended | No Stupid Questions with Colin Smith | Adobe TV

The measurement tool in Photoshop CS5 Extended can accurately measure distance, area and angels in your image but did you know that you can customize the scale that you measure? Colin will show you have to use these tools and accurately measure the height of our stand-in criminal Karl Miller. Also covered will be out to print our 1:1 so that measurements can be taken from printed outputs.
http://adobe.ly/yK4Aa9

Hi,
Where can I find the Analysis Menu in CS6 ?
I try to print an "ortographic" front view of a 3D model in 1:1 scale but I can't use your trick...
Many Thanks

BEx queries in BI 7.0

Hello
We have installed BI 7.0. When i try to view query in BEx, i get a message No authorizations.... In BI side i have assigned SAP_ALL and SAP_NEW profiles.
Could anybody give me advice?
Thanks in advance
Best Regards,
Arunas Stonys

Hi:
There is an option in the IMG (tx SPRO), under reporting relevant settings, where you can set the analysis authorization concept back to the 3.x type reporting authorizations. You can run in SAP NetWeaver BI 2004s using 3.x reporting authorizations.
When you are ready to go ahead with the new analysis authorizations, keep in mind that the the special authorization 0BI_ALL is the one you need to give you access to all authorization-relevant infoproviders.
It would make sense to look into concepts like report RSEC_MIGRATION, and transaction RESADMIN, but make sure you have an understanding of the authorization concept before moving ahead with it in your project plan.
Thanks for any points you choose to assign.
Best Regards -
Ron Silberstein
SAP

How easy is the buffalo linkstation to use with my mac?

i'm thinking of buying a buffalo terastation to add more capacity to my system. i would connect it to my router and then the mac would probably access it wirelessly, although i could wire it together. how easy is it to access something like a buffalo terastation from my mac? does anyone know how i do it? will i be able to access movie files and itunes libraries from there if i put them on the terastation. is it quick or will i find it really slow? do i access the files from a finder window just like i would with files on my mac harddrive?
i'm fairly new to macs and although i understand how network attached storage works in principle i've never tried it.
thanks.

It should be a pretty straightforward hookup. It looks like it would connect through an SMB share, much like how you would connect to a PC on the same network. It is what I use to connect to my PC from my iMac through my Netgear router.
I have heard mixed things about NAS units. They are very expensive per gigabyte and often do not perform very well speed-wise. If you are looking to use this to store video, I think you will be dissappointed.
I have wanted to do something like this myself. I have looked into these as well as single NAS drives and even using a NAS device that allows several plain USB drives to be used as NAS. All of these options have tradeoffs and none are ideal.
One thing you want to look out for is that not all network drives are NAS. Some use proprietary drive formats that will not work with your Mac, like the Netgear SC101. Make sure that you get one that supports an open drive format - a Linux file system.
So far, the most promising possibility (for me) seems to be building a cheap PC, get some ATA drives on sale and throw Linux on it to use it as a server. The cost would be less, but support would be hard to come by
You can get 400GB drives on sale for $160-ish, add a case for $50, a low-end CPU and motherboard for $90-ish, 512MB RAM for $40, a CD drive for $30, and a KB/mouse for $30. If you have any of that stuff around - great.
I am at a point where I have "paralysis by analysis." I do not know what to do since there are so many tradeoffs.
I do have a lot of PC parts lying around, so that might be the way for me to go.
Sorry to prattle on, but I wanted to share some options.

Pdf file not able to perform the user rights getting failure message

Hi All
i am using a trial version of Livecycle ES.
I am facing a issue while providing the user rights to the PDf file (dynamic file created in livecycle Designer 7.0). After uploading the file and providing the user right to embedded the file attachment. I am getting a failure message. Don’t know what the reason is.
Please kindly guide me on
Getting the Error logs, where I can specify and analysis the problem in detail.
On what are the case’s that I will be prompted for such error
Thanks in Advance
Sreekesh Anand.S

We had issues with attachments in version 7.0. You might try opening the LiveCycle 7.0 form in 8.1 or higher and then saving it.

MESSAGE_TYPE_X error

Hello all,
We are facing an issue, that "Message_type_X " short dump occurs .
the actual short dump message is:
"MESSAGE_TYPE_X" " " |
"CL_RSQ_ISET_SERVICE===========CP" or "CL_RSQ_ISET_SERVICE===========CM016"
"EXTEND_FIELD_BUFFER" .
kindly help me..
|

hi,
kindly check SAP Note 1137254 , it might be helpfult to you
also check in sm21 about system log, in ST22 check on information on where termiinated and in error analysis that will give you some clue on job which is effected
regards
laksh

Where is PS CS 6 analysis Manu?

Similar Messages

Maybe you are looking for