Where is the activity function gone? in version 6 Safari

Where is the activity function gone? in version 6 Safari. I may have updated from a previous version around the beginning of August 2012.
I came to use this function only to find it missing??

Safari 6
Apple removed Activity Window in Safari 6.
Best.

Similar Messages

  • Where is the Search Function in the Forums?

    Where has the search function gone from the forums? I have been using it frequently lately because I am setting up a Powerbook 1.5 g4 with FCP 5.1.4 and it is the best way to find answers for "legacy systems" such as mine.

    That search is DIFFERENT? Basic SUPPORT search?
    Son of a...
    Sorry.
    Shane

  • Where is the activity windows in safari 6?

    Where is the activity windows in safari 6?

    I miss it too.  I used it all time and now its gone.  Apple, please bring it back in Safari 6.1!

  • Where is the pause function in scout?

    Where is the pause function in scout? I want to pause the monitor, then restart the same one. But it only gave me a new session.

    There is no pause function at the moment. For most of the data settings (especially if you only use low overhead settings like basic telemetry and the ActionScript sampler), the amount of data is very low, so you can run Scout for a long time without running out of memory (I've run Scout profiling content continuously for more than a day, with it using only about a gigabyte of memory).
    For the high overhead settings, memory is more of a problem. For Stage3D, you can start it in "delayed" mode (choose from the dropdown - "immediate" is the default). This still captures all the Stage3D commands, but doesn't load them into memory until you click "start recording" in the Stage3D Rendering panel. When it does, it constructs a condensed version of the earlier commands, so you can still replay subsequent frames (it has all your textures, etc), but without using as much memory. You can only do this once though - there's no way currently to start and stop Stage3D recording.

  • Where has the "recordings" options gone in imovie for the iphone? It used to be listed under the audio tab in the import icon.

    Where has the "recordings" options gone in imovie for the iphone? It used to be listed under the audio tab in the import icon. At one point you could add audio to a project from the Voice Memo app.

    there is NO "reload" button under "customize"!
    how do I get my toolbars set back to pre-firefox4?

  • ITunes 11.0.1 Where has the radio option gone from my source list on the left side of iTunes ? How can I restore it?

    Where has the radio option gone from the source list on the left hand side of my itunes? How can I restore it

    If you have it turned on it is now under the music section on the top where you have Songs, Albums etc. It is on the far right next to Match.
    If you cannot see it then Preferences and Tick Radio Option
    If it is still npt there the Preferences, Parental and untick Disable Radio

  • Where has the preview panel gone is Bridge CS5?

    Today when I opened up Bridge, the preview panel on the right hand side has disappeared. It shows as being selected when I go to the Window Menu but it isn't there. The scroll bar is also missing so I can't view all of the thumbnails. Does anyone have any ideas about why this has happened and how I can return it to it's normal format? Thanks, Michelle.

    Fantastic. Thank you, much appreciated
    Date: Mon, 16 May 2011 02:22:18 -0600
    From: [email protected]
    To: [email protected]
    Subject: Where has the preview panel gone is Bridge CS5?
    No, but you can choose Reset Workspace from the workspace menu to get it back to normal.
    >

  • Where has the visualizer button gone?

    where has the visualizer button gone in the bottom right corner?
    bit of a pain as i used it quite often

    iTunes 7 is pretty smart overall, nevertheless I have a few serious gripes with the interface. Firstly the little 'snowflake' icon on the bottom right that switches on the visuals has been replaced by the browse and burn icons. Was there a problem with the previous layout? My wife and I use that button everytime we turn on the visuals on our Mac Mini sound system in the living room. It was super convenient because you could move in a single mouse sweep from selecting a playlist to switching on visuals. With iTunes 7 you have to either select from the pop-down menu or switch to the keyboard and press cmd+T. It might not seem such a big deal to some but it's definitely a backwards step, no matter how small.
    The album art selector/display is very cool and niftily programmed however I'll never use it. The reason? Because if you fill it with album artwork, all those images are displayed over the visualiser at the start of each tune, which I HATE. I don't want sleeve designs ruining the beauty of G-Force which I paid good money to see. It's bad enough having the track info show when I already know what's playing! iTunes 7 is simply not configurable enough if you ask me, and hey, you shouldn't have to start configuring Fkeys to make up for the fundemental lack of choice in the program preferences.
    I have a pal who loves the gapless playback in the new iTunes 7 because it's great for mix cds. Well maybe that's the best playback feature of iTunes 7 but I'm afraid it doesn't make up for the loss of the visualiser button, so there!
    G4 Twin 1.25 Mirror Door   Mac OS X (10.4.7)  

  • Where is the search function in the iTunes store in this latest version?

    Hello
    Since downloading the latest version of iTunes, I cannot find the "search" function in the ITunes store, to search for apps, movies, etc.  Can someone please tell me where this is now located? Frustrating and really hate this new version. Why did they change a perfectly decent product?
    Thanks!

    Actually, not on mine.  All there is in the upper right hand corner is a list of my history - but no search function.  Any ideas as to how I can make it appear in the upper right corner?
    Thanks

  • Where has my motion activity function gone on my 5C?

    Whilst using IOS 7 on my 5C I had a motion activity function which I used a step tracker App (Withings)
    Following update this motion activity function has gone from my 5C but still remains on my 5S. Why?

    Sorry, you lost me on that last post.
    Let's start over again.
    Open AirPort Utility on your Mac
    Are you asked for a password at this point?  If yes, enter the base station or device password that you used when you originally set up the AirPort router. Depending when you did this originally, you might have been given an option to use the same password as the wireless network. If you were not, then you have a separate password for the base station.
    You need that password to be able to access the settings for the AirPort router in AirPort Utility.
    If you see a window listing basic information, click Edit in the upper right corner of the window.
    If you are asked for a password, you must enter the device password or base station password that you established when you first set up the AirPort router as explained above.
    If you forgot the password, a Soft Reset will allow you to go in and reset the base station password.  Might be a good idea to write down that password.
    If you are still stuck, then the only option that you have at this point is to perform a Hard Reset to return the settings to factory defaults and then set up the AirPort router again.
    If you prefer, you can also do a Factory Default Reset. It's the same as a Hard Reset except for the timing of holding in the reset button.

  • Destop version 6.0.0.43 Where has the cab file gone?

    Hi,
    I just upgraded my desktop version and when I do my backup now I only see one file from the back up.
    blackberry9300.ipd             the size is about 786 ko
    before with the older desktop version 5.0 the backup used to create 2 files
    blackberry.ipd                      size is   806 ko
    blackberry9300.cab            size is  27 000 ko
    My question is where is the cab file with the new destop 6.0 version?
    it's use to be saved in the same folder as the .ipd file
    Did they change the format or file extension of the cab file? 
    The reason I want to find this file is because I like to backup the 2 files to an external hard drive.
    thank you

    Hey maj54,
    Welcome to the BlackBerry Support Community Forums.
    The way you had the synchronization setup, it seems like it was setup to synchronize the on-board memory and media as well.
    Hook up the BlackBerry to your computer and enable mass storage mode.
    Then click on backup and right below custom:
    Files saved on my built in media storage should be check marked
    once this is check marked it will will create the Cab file and ipd
    -ViciousFerret
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Like! for those who have helped you.
    Click  Accept as Solution for posts that have solved your issue(s)!

  • Where is the autoplacer function / menu in Ultiboard 9 ????

    Hello, I am using Multisim and Ultiboard 9 and I am looking fo the AUTOPLACER function where the program wil automatically place the components on the circuit board for you...however I can't find this menu/function anywhere? I am using the Power Pro version. Also, is there a way to put the Auto route functions in the main menu at the top of the window? Right now all I have is two little 'Icons" in toolbar form, one to start the internal router and one to stop it...but again, no autoplacer. Thanks
    Brian

    In V9, the router that comes with Ultiboard is limited to 2 layers.  The Ultiroute version that is sold separately gives you more layers and if you purchased the power pro, it has the autoplacer in there.
    In V10, if you installed the power pro version of Ultiboard, it will have the autolacer in there.
    Tien P.
    National Instruments

  • ITunes 11 / where is the repeat button in Mac version?

    In iTunes previous versions, there was a repeat-play button (it toggled:  repeat track or repeat entire playlist or don't repeat) down at the bottom of the source panel, same general area as the shuffle button.    Now the shuffle button is up by the playlist title (and it doesn't cause the main window display order to resequence any more, which is ABSURD), and the repeat button is nowhere to be found as far as I can tell.
    In the latest version for iOS of iTunes,  there is still a functional repeat button on the artwork view of a currently playing track.  It will definitely repeat one track, I'm not sure what the toggle to repeat does if it's turned while a playlist of multiple albums is playing.
    Anyway what happened to the repeat functions in iTunes 11??     They seem to have vanished from the Mac version at least.
    And what's with the lack of "what you see is what you get"  when you turn shuffle on in iTunes 11, and the main window display doesn't  update to reflect the new sequence of play?   Why should we have to look up in that UpNext thing to see what the shuffled order of play is?!

    Hi, I don't have any in 10.4.11 either.

  • Where has the iCloud icon gone in the menu bar

    When iCloud where in the trial stage they had a little cloud icon top right side in the menu bar to drag and drop files to. I recentlywanted to upload docs to iCloud and noticed it had gone. I never log into iCloud from the Internet, after reading the threads, it seems this is the only way to save files to the cloud now, am I wrong?

    Are you sure you aren't confusing iCloud with iWork.com? In any event, there's no menu icon. To upload iWork documents, go to http://icloud.com and go to the iWork page, pick the appropriate of the three programs, and drag the file in the Finder to the web page.
    More details here:
    http://help.apple.com/icloud/#mm9d2051b9

  • Where did the delete option go in Version 7.0

    I listen to a LOT of podcasts and when I was through with each episode I could easily delete them from the library in previous iTunes versions. In the new version I can only select the podcast subscription for deletion and it wants to delete all the episodes associated with that particular subscription in the library.
    The only place I've been able to find the listing of what's been added after downloading is under "recently added". This is actually where I want to delete the individual files that I've listened to. Not the entire subscription under the library.
    My question is this. My "recently added" files are really starting to mount up even though I've listened to most of them. How do I delete these files one by one?

    It's now in two places:
    Clear History:
    Clears the list of webpages you viewed. Also empties caches, removes website icons, and clears the list of recent searches. Website icons are small graphics that help identify sites on the Internet. You see them in the address and search field, the bookmarks list, and other places. You can see your recent searches by clicking the magnifying glass at the left end of the address and search field when it’s empty.
    Also:
    In Developer Menu pull down > Empty Caches.
    Crazy, I know.
    There is some question about which "Caches" the developers menu clears.  Stay tuned.

Maybe you are looking for