Windows Vista/Windows 7

I currently am running Windows Vista. I need Windows 7 Is there a free basic version?

I've installed all vista updates and the other day installed the new version of itunes 7.3 and now i can transfer all info to ipod. However, I have now just been attempting to burn an imported disc and during the intializing period it pops the blanks disc out and says an unknown error occured(2131). Any ideas

Similar Messages

Disabling SMB2 and SMB3 Client from Windows Vista, Windows 7 and Windows 8.

There are many programs that are using a shared file on the server from clients from XP to Windows 10. From time to time it seems like there is a network outage and the handle to the file is broken and the file
cannot be read or updated. It seems more prevalent on a Windows 2012 server but may have happened from time to time on 2008 & 2008 R2. However there are not any network problems so it just leaves the server & Client
I have searched for possible resolutions including:-
Turning off the Cache for the share
Disabling the network adapter power setting to allow windows to put the device to sleep.
Disabling Antivirus/configuring it to ignore folders for on access scanning
Disabling SMB Signing
Configuring the clients DWORD registry value SilentForcedAutoReconnect=1 in HKEY_LOCAL_MACHINE\Software\Microsoft\CurrentVersion\NetCache
Setting the "NET CONFIG SERVER /AUTODISCONNECT:-1" to not drop client
connections
The last bit of trouble shooting that I can think of is to disable SMB2 and SMB3 as that does a lot of caching and batching of packets which could also be the cause of the problem.
I have looked at
http://support.microsoft.com/kb/2696547/en-us
I have disabled SMB2&3 on the server as that is very straight forward.
When I get to the section about disabling SMB2 on the client the command fails.
sc config
lanmanworkstation depend= bowser/mrxsmb10/nsi
  After running the above command, it returns an error:
      [SC] ChangeServiceConfig FAILED 1059:
      Circular Service Dependency was specified.
So it's not worth running the following command:
sc config mrxsmb20 start= disabled
I have tried the command on Windows Vista, Windows 7 and Windows 10 just to confirm that it's nothing to do with any particular PC, machines in Domains and Non-Domain machines.
So, my questions are:-
1, is
http://support.microsoft.com/kb/2696547/en-us actually correct and up to date and for the OSes (Vista, 7, 8, 8.1, 2012 server and Windows 10) with latest updates & service packs?
2, How do I disable SMB2 and SMB3 on clients for troubleshooting purposes the server to resolve problems with shared files (multi user access)
3, If I just disable SMB2 & 3 from the server would that force the clients not to use SMB2 when communicating with the server and therefore not caching the directory structure and file not found etc? I have seen posts that suggest this is not the case.
4. Does sc.exe have a bug in it?
Thanks in advance
Rob

Hi,
I made a test in our testing enviroment, everything works fine to disable SMB2 and 3. For your problem, in my opinion, as I didn't find any specific report about this error, it would be better to use Process Monitor to capture the trace when running the
command.
Start Process Monitor, then set the filter as cmd.exe, after that, open CMD and execute the command.
Process Monitor:
http://technet.microsoft.com/en-us/sysinternals/bb896645.aspx
In addition, I found another thread that had similar error with yours, you can take its solution as reference.
https://social.technet.microsoft.com/Forums/windows/en-US/506828c8-e7af-4039-aca7-43321939bb55/offline-files-synchronization-error-the-file-specified-cannot-be-found?forum=w7itpronetworking
Roger Lu
TechNet Community Support
Roger,
Many thanks for the time taken to look into this.
I've downloaded process monitor and loaded it. I filtered for cmd.exe started capture and saved a 1mb file.
However I don't think this is going to help unless you can point me in the direction of what you're expecting to see in the capture file? If you want me to send you it I can but it does contain personal information which I'd rather not place online.
You can recreate the problem yourself by doing the following:
Go to modern.ie
Download any windows 7 virtual machine for your preferred of virtualisation platform
log in, start cmd as administrator and run the command
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi
You will also receive the same error.
[SC] ChangeServiceConfig FAILED 1059:
Circular Service Dependency was specified.
You can also try it on the Windows 8 and 8.1 machine if you have time.
I checked the link to the similar error and that just looks at the file not found problem which is the smb2 cache. They still didn't resolve the slow access to the share which is seen on a machine that has anti-virus on it when you go to right click
on the folder or a file in the folder. It's about a 20 second (spinning circle) pause every time. The problem is bigger than that. If you have shared files on the network share that are used by multiple people at the same time, say a spreadsheet or database
file windows is loosing the connection to that file so the user cannot write to it even if they have the file open. The smb2 caching shouldn't cause that problem.
It appears that I have to disable from SMB2 and SMB3 and ensure that the clients only use SMB1.
If SMB2 & SMB3 are disabled from the lanmanworkstation service the clients will not do any caching even if the server has disabled the share cache (offline files for that share).
The problem with the "Circular reference" error message is standard across all versions of windows that have "smb2" or "smb2 and smb3". Can you recreate that problem? Or is it working on your windows computer and on the machines
downloaded from modern.ie ?
My testing has shown that the command "sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi" does not work. Therefore that's the one I want to resolve first. By resolving that I may be able to get the clients accessing the share to behave
themselves and use the shared files correctly as they always did from Windows 95/NT4 through to Windows XP and 2003/2008 server.
I'm unable to recreate the problem with multiple users having access to shared database files on windows 2012 server from Windows 7 clients were the access to the files drops once a day or once every couple of days.
Kindest Regards
Robert

BDB support for Windows Vista, WIndows 7 and Windows Server?

Hello,
I examine to use BDB on Windows, and I have a question.
There's a description about supported OSs on the BDB reference guide as follows;
Where does Berkeley DB run?
The Berkeley DB distribution includes support for Windows/95, Windows/98, Windows/NT, Windows/2000 and Windows/XP, via the Microsoft Visual C++ 6.0 and .NET development environments.
Does BDB distribution supports for Windows Vista and Windows Server 2003?
And it will support Windows Server 2008 and Windows 7?
I believe that BDB does not depend on specific function of Windows, thus there's no problem to support them...
Regards,
Akira

Yes, we have a plan about BDB support for Windows Vista, Windows 7 and Windows Server. Once we are ready, we'll let you know here.
Hi Vit,
For Berkeley DB XML questions, please go to the Berkeley DB XML forum at: Berkeley DB XML
By the way, I learnt there's a XP-compatible mode in Windows 7. You may want to try DB-XML with that.
Best regards,
Chao Huang
Oracle Berkeley DB

Firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast. FF version 8.0.1, windows vista & windows XP.

firefox is loading pages very slowly, most of times saying server not found. Same pages loaded quickly in ie9. Previously FF used to load pages fast.
FF version 8.0.1, windows vista & windows XP.
Please help
Generally we dont get any reply to the questions asked here!

65kid wrote:https://bbs.archlinux.org/viewtopic.php?id=162327
Thank you for the link, but I am not sure how this is going to help me: I am not booting straight to an X session, but prefer to log into TTY1 and have my login shell handle everything from there.
Here is the relevant part of my .zprofile:
if (( UID )); then
[[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && exec systemd --user
fi
As far as I understand, your method works if I enable the [email protected] template when actually booting straight to X.

Audigy 2zs Gamer and Windows Vista / Windows 7

.Audigy 2zs Gamer and Windows Vista / Windows 7? Hello, I am just wondering if it is a known issue to have really loud static and crackling when playing games using this card in Vista or Windows 7. I had this issue playing Bioshock a few months back on my Vista boot. I never figured out a way to resolve it so I belei've I just eventually uninstalled the driver and used the card without a driver install (not sure but I think this what I did). It worked but I might as well of just ran onboard sound...
Now I have installed and tried to run Windows 7 on a dual boot but I started receiving really loud cracking and popping in Warhammer Online and realized I had not installed a driver for my sound card. I did not expect creative to have a Win 7 driver yet but thought perhaps the Vista driver would work in compatibility mode, it does and sounds awesome and really makes me remember what I am missing without my driver installed on Vista but unfortunatly it randomly starts the crackling and popping again after a while...especially when a lot start happening on screen (pvp raids with many characters on screen and magic effects).
When the crackling starts happening I have no choice but to exit the game and restart the computer to get rid of the noise, but randomly it comes back after a while during gameplay. So as a temporary solution I have installed my onboard sound drivers and have been using that for sound output and my mic port on my sound card for my microphone. I would REALLY love to get my sound issues worked out in both Vista and Win 7 because it sounds SOOO awesome while it's working, the popping though is terrible, I never had that issue in XP.
I know this is an older card but any help would be appreciated!?
Message Edited by grimdeath9740 on 0-4-2009 2:3 PM@
68.95.29.2

One thing you do need to learn is that SHOUTING IS MUCH HARDER TO READ!
But, if you are using Audition 1 and it works with XP, then if you have the chance, I'd stick to that on a new machine. Apart from anything else, it's completely untried with Windows7 and with Vista its a) likely to have problems, and b) going to run slower.
The other part of your question about the 'look' of later versions is that 1.5 looks pretty similar to 1.0, but with 2.0 and 3.0 things have changed somewhat - rather more with Multitrack View than Edit View. Basic operating principle remains the same, though - most people have had very little trouble transferring from one to another.

Mac mini, boot camp, windows vista/windows 7, DVI to HDMI, no display

I have a mac mini from 2008 on which I have put windows Vista via boot camp. I have connected the mini using DVI to HDMI, to my Sony Bravia 1080p HDTV.
When I log into the mac 10.6.2, all seems fine and I can see the display alright.
When I log into Windows Vista, I cannot. The display stays black even though I hear the Windows startup sound.
I tried force-upgrading to Windows 7 and the same thing. In fact at some point I can see some of the stuff (like when starting in safe mode), but as soon as it boots up, the display goes blank.
Normally I can see the display up to the point where it says loading Microsoft windows (with the small progress bar) and then, nothing.
Any clues what may be happening?

No response

Which register cleaner or tune up software is the best to use for windows vista,windows 7 and windows 8.1 as professional?

hi,
I like to know wich register cleaner or tune up software is the best to use for windows vista- windows7- and windows 8.1.
I like to know the proffesional version of it which I can use for my clients every where unlimitted to clean unwanted keys of registry and improve performance.(specialy in Dutch language).
thanks
johan
h.david

I second what Kate Li said. There's no need for a registry cleaner! Don't do it! I run Windows systems for years and they keep running as light and fast as when they're new.
What I *do* recommend is regularly reviewing the list of programs set to run in the background using a tool to show you what starts in various ways called Autoruns, which can be found here:
http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx
This tool can be used to disable things you don't need.
-Noel
Detailed how-to in my eBooks:
Configure The Windows 7 "To Work" Options
Configure The Windows 8 "To Work" Options

Hot Sync with Windows Vista, Windows 7`

I have a client with a large deployment of Palm III and Palm IIIc devices. They are looking for a HotSync Manager that is compatible with Windows Vista and Windows 7, and that will still support sync operations with Palm III and Palm IIIc devices.

http://forums.palm.com/t5/Windows-HotSync/Windows-7-and-Vista-hotsync-instructions-here/td-p/251755/...
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Flex launching error on Windows Vista (Windows No Disk - exception ....

Hi guys, I downloaded the flex builder from adobe, I install the application but when I'am trying to lauch my application I get the error
Windows - No Disk ... exception processing message 0xc0000013
I reinstall adobe flash and my java runtime, I still get the same error, I can create an application but I can't execute it, that's sucks!
I check on adobe in the faq for flex, they say that error occurs when you install the application from a DVD, that's not true, I downloaded from their site....
thanks
Alex

Ok guys, I found it myself, very strange!
I just change my default workspace to another one, I got the same problem then I just put back the default workspace and the problem was resolved!
Alex

Can't Install iTunes 10.6.3 Windows Vista Windows Installer Problem

Basically, just before installation completes a popup of "There is a problem with this Windows InstWhat exactly would I be missing??? please help !aller package. A program required for this install to complete could not be run.". I've read many threads that state that all I have to do is run a repair on the Apple Software Update(ASU) but my problem is that I've already uninstalled it. Now what comes to my mind is that, it wasn't a clean uninstall as I just uninstalled through Add & Remove.
So I would preferably like to get an answer to the whole problem or if not what files are linked to the ASU that might cause this problem. Please help I've alot of things and I really hope there is another solution then to reformat my PC, I really don't wanna reformat my laptop just for iTunes and because I have an iPhone, I unfortunately, have to depend on having it installed.
Back story (Why I do not have ASU):
When I updated my iTunes and several other Apple software, I was unable to start itunes, kept getting a permissions issue. So I set all the permissions to my User Account (note that I am, from the start, using an admin account) but still errors kept popping up. Usually when an update doesn't work I just go through Add & Remove and uninstall all Apple programs before trying to reinstall iTunes and etc, which I did, Except this time...

Download and save a full itunessetup.exe or itunessetup64.exe file(depends on your operating system).
http://www.apple.com/itunes/download/
Use Winrar to unzip the file into a folder. Then right mouse click the file AppleSoftwareUpdate.msi from that folder to install.
If you don't have winrar, you can go to this link to download a free trial version.
http://download.cnet.com/WinRAR-64-bit/3000-2250_4-10965579.html?tag=dropDownFor m;pop

Ipod Nano 4th Gen not recognised in Windows Vista, Windows 7 or Itunes and screen blank

Hello,
I have a quite old (3-4 years old) iPod Nano 4th Gen.
The screen is blank, which means it needs charging. When I plug it into my laptop/computer then it doesn't show up which im assuming is because it needs charging.
When I plug it into my plug charger (plugged into a wall) nothing happens.
I think this is because the cables (I have 3- 2 computer USB cables and one plug charger cable) being too lose and not connecting to the iPhone fully.
I have looked at all the articles, I have done the R's, I have tried to restore it, I have pressed the clickwheel and centre button together and I have toggled the hold switch.
If anyone can help it would be appreciated! (And please save the "take it to apple support" etc... comments for if you can't think of anything else- not being rude but I know this)
Thanks
BitMyApple

Hey, I hear ya and can sympathize. I have the same
issue. The difference is that my computer can "see"
my ipod but it refuses to show up in itunes itself;
therefore, I can't put anything on the ipod (from the
computer) and vice-versa. Apple support is clueless.
This is very frustrating to say the least. Itunes
keeps telling me that my ipod is synced to a
"different" computer, which isn't true. It's the
same computer. The difference is that when I first
got the 'pod and used it with this computer (and
everything worked fine), I was running XP. I
installed Vista and after that, all the problems
started. If I ever get this resolved, believe me,
I'll post something here.
I'm guessing that somehow, itunes "sees" what
computer it's hooked to by "looking" at something in
the OS. Change the OS and it "thinks" it's seeing a
"different" computer.
Try reformatting it.

ITunes no longer works on my Windows VISTA system. Get error msg saying C runtime library incorrectly... Error 7, Windows error 1114..

iTunes no longer works on my Windows VISTA system. Get error msg saying an application is attempting to access C runtime library incorrectly... Error 7, Windows error 1114. Same msg, or one that says unable to install, when trying to update or reinstall iTunes. iTunes worked well up until about a month ago when this error msg starting appearing.

Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2

Windows Vista update error code 80070490

Hi there,
Can anyone help me with this issue! I've tried everything under the sun to fix this problem so I'm hoping you's more in the know than myself can help!!??

Hi
This Vista update problem seems to be known to Microsoft:
+If you receive Windows Update error 80070490, it means that a file (CBS Manifest) that's needed to install updates is corrupt. To correct this problem, you'll need to repair Windows. Repairing Windows won't damage your personal files or the programs that are installed on your computer.+
Here more details how to fix this issue:
[Windows Update error 80070490|http://windows.microsoft.com/en-us/windows-vista/windows-update-error-80070490]

Troubleshoot installation problems in Photoshop Lightroom on Windows Vista

This document can help you to resolve system errors that occur while you use Adobe Photoshop Lightroom on Windows Vista. System errors can manifest in many different ways, including (but not limited to) the following:
A blank or flickering dialog box
A frozen cursor or screen
A blue screen
An unexpected restart
An error message such as:
"Setup is unable to load the installation script file."
"Unable to create a directory under C:\Windows\System. Please check write-access to the directory."
"Uninstalling: C:\Program Files\Adobe\Adobe Photoshop Lightroom refers to a location that is unavailable. It could be on a hard drive on this computer, or on a network. Check to make sure that the disk is properly inserted, or that you are connected to the Internet or your network, and then try again. If it still cannot be located, the information might have been moved to a different location."
Note: If you attempt to install Photoshop Lightroom to a drive that doesn't have the minimum required space available, the installation will fail. You must then completely reinstall to another location that has sufficient free space.
Many different factors can cause system errors, including conflicts among device drivers, applications, operating system settings, hardware, and corrupt elements in specific files. Although a system error may occur only when you work with Photoshop Lightroom, Photoshop Lightroom may not necessarily be the cause; it may be the only application that uses enough memory or processor cycles to expose the problem.
To benefit most from this document, perform the tasks in order. Keep track of the tasks that you perform and the results of each, including errors and other problems. Adobe Technical Support can use this information to better assist you if you need to call.
You must be logged on as an administrator to perform some of the procedures in this document.
Important: Some of the procedures in this document may initiate a User Access Control dialog that asks for your permission to continue. Read the details in the dialog to determine if you want to continue. If you choose to cancel the dialog, then you will not be able to continue with that troubleshooting step.
The steps in this document that refer to the Control Panel are in reference to the Classic view. For information on switching the Control Panel to the Classic view and many other common OS procedures, see Common Microsoft Windows Vista procedures (TechNote kb401275)
Some of these procedures require you to locate hidden files and hidden folders. Some procedures require you to locate files by their full file names, which include extensions (for example, example_filename.ini). By default, Windows Explorer doesn't show hidden files, hidden folders, and file name extensions that it recognizes.
To show hidden files, hidden folders, and all file name extensions in Windows Explorer:
In Windows Explorer, choose Organize > Folder And Search Options.
Click the View tab in the Folder Options dialog box.
In Advanced Settings, select Show Hidden Files And Folders.
Deselect Hide Extensions For Known File Types.
Click OK.
Note: The procedures in this document are based on the default interface of Windows Vista. If the interface is customized, some procedures may vary. For example, a commonly encountered difference is the navigation to Control Panel from the Start menu: You may navigate Start > Settings > Control Panel instead of Start > Control Panel. Additionally, the procedures in this document assume you are using the Classic View of the Control Panel: To view the Control Panel in the Classic View, click Switch To Classic View on the Control Panel navigation bar on the left side of the window.
Beginning troubleshooting
The tasks in this section can help you resolve the most common system errors. Before performing any of these tasks, back up all personal files (for example, Photoshop Lightroom files you created). Always restart the computer after a system error occurs to refresh system memory. Continuing to work without restarting the computer may compound the problem.
1.Make sure that the system meets the minimum requirements for PhotoshopLightroom.
Photoshop Lightroom may not run correctly on a system that doesn't meet the following requirements:
Intel Pentium 4 or equivalent processor
Microsoft Windows XP, Windows Vista, Windows 7
768 MB of RAM (1 GB recommended)
1 GB of available hard-disk space
CD-ROM drive
In addition to these requirements, a video card that supports 24-bit (16 million) or more colors, and a resolution of 1024 x 768 or higher, is recommended.
* Photoshop Lightroom 1.0 will install and run on Windows Vista but Adobe cannot guarantee the quality of the software experience until Adobe fully certifies Photoshop Lightroom for use on Windows Vista.
To check basic system information, such as processor speed and how much RAM is installed, choose Start > Control Panel > System.
2. Delete previously installed application files, especially if you had the public beta version of Photoshop Lightroom installed.
To delete files from a previous Adobe Photoshop Lightroom installation attempt:
Choose Start > Control Panels > Add or Remove Programs.
Select Adobe Photoshop Lightroom and choose to remove it.
Close the Add Or Remove Programs window and the Control Panel.
Open Windows Explorer.
If the Lightroom.exe file is still in the Program Files\Adobe\Adobe Photoshop Lightroom folder, delete it.
If the Lightroom Preferences.agprefs file is still in the Documents and Settings/[username]/Application Data/Adobe/Lightroom/Preferences folder, delete it.
Empty the Recycle Bin.
Try to reinstall. If you cannot, continue with the next two sections in this step:
Move all the folders under the Users/[username]/AppData/Roaming/Adobe/Lightroom folder into a new folder on the desktop; name the folder Lightroom Presets. These are the presets that were installed with the application and that you created.
Move all the folders under the Users/[username]/Pictures/Lightroom/Lightroom Previews.lrdata folder into a new folder on the desktop; name the folder Lightroom Previews. If you have a large number of images, you can move this folder back to its original location before you open Photoshop Lightroom, once it's installed. Or you can delete this folders to re-create it when Photoshop Lightroom opens. If there are further problems with Photoshop Lightroom after it's installed, it might be due to corruption in the previews, in which case you need to delete this folder and re-create it.
Try to reinstall.Important: Do not delete the Lightroom Database.lrdb file!
If there are further problems with Photoshop Lightroom after it's installed, these issues may be due to corruption in the preset files you created, in which case you need to remove them and re-create them, or test each preset individually.
Note: If you can reinstall, and if this is not the first time you opened Photoshop Lightroom, then Photoshop Lightroom will look for a library database file. If it does not find a library in the expected location, it will prompt you to create a new library, locate the library, or exit. Exit will close the dialog box, and Photoshop Lightroom will not open. Although you can tell Photoshop Lightroom to locate your library, it's best to put it back in the default location and then open the application.
If you can reinstall, close Photoshop Lightroom and then copy any presets you created from the Lightroom presets on the desktop back into the Users/[username]/AppData/Roaming/Adobe/Lightroom folder.
If you cannot reinstall, then move the Lightroom Database.lrdb file from the Users/[username]/Pictures/Lightroom folder into a new folder called Lightroom Database File and save this file on the desktop. This is your database, if you previously had Photoshop Lightroom installed.
Reinstall Photoshop Lightroom. If you cannot reinstall, continue with the next task in this document.
3. Log in as Administrator before installingPhotoshopLightroom.
In Windows Vista, you must be logged in with local (that is, machine) Administrator rights to install Photoshop Lightroom. If you don't have administrator rights, contact your system administrator for assistance.
4. Check the CD and CD-ROM drive.
Dust or dirt on a CD can interfere with an installation and prevent the CD-ROM drive from recognizing the CD. Examine the Photoshop Lightroom CD for dirt, dust, or fingerprints. Gently wipe the bottom of the CD from the center outward with a soft, lint-free cloth.
Verify that the CD-ROM drive can read other CDs. If it can't, examine the CD caddy or loading tray for dirt, and clean it with a lint-free cloth. If it still can't read other CDs, contact the CD-ROM drive manufacturer or the computer manufacturer.
5. Install current Windows service packs and other updates.
Updates to the Windows operating system improve its performance and compatibility with applications. You can obtain Windows service packs and other updates from the Microsoft website at www.windowsupdate.com. For assistance installing service packs and other updates, contact Microsoft technical support.
Important: Before you install a system update, check the system requirements for Photoshop Lightroom (and any third-party software or hardware you may use with Photoshop Lightroom ) to ensure compatibility. If the update isn't listed, then contact Adobe or the manufacturer of your third-party software or hardware.
6. InstallPhotoshopLightroomfrom the desktop and use the default installation folder.
Some system components such as device drivers and virus protection utilities can conflict with the Photoshop Lightroom installer and result in an incomplete or failed installation, or they can cause problems when you install to a folder or when you use a path to the default installation folder that contains a special character, such as #. To prevent these conflicts, install Photoshop Lightroom from the desktop, and use the default folder name and path.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
7.Re-create thePhotoshopLightroompreferences file.
Re-create the Photoshop Lightroom preferences file to eliminate problems that a damaged preferences file might cause:
Quit Photoshop Lightroom.
Rename the Lightroom Preferences.agprefs file (for example, to Lightroom Preferences.old) in the Users/[username]/AppData/Roaming/Adobe/Lightroom/Preferences folder.
Start Photoshop Lightroom. Photoshop Lightroom creates a new preferences file.
If the problem continues, the preferences file isn't the cause. To restore custom settings, delete the new preferences file and restore the original name of the previous preferences file.
8.Install and run Photoshop Lightroom while no other applications are running.
Some applications may interfere with installing or running Photoshop Lightroom. Virus protection programs are meant to stop viruses from installing on your computer. Before installing or starting Photoshop Lightroom, disable other applications, including virus protection programs and startup items (items that start automatically with Windows).
To disable startup items and non Microsoft services:
Quit all applications.
Choose Start, type msconfig in the Search text box, and press Enter.
Write down all unselected items under the Startup and Services tabs.
Click the General tab, and choose Selective Startup.
Click the Startup tab and select Disable All.
Click the Services tab and select Hide All Microsoft Services.
Select Disable All then re-select FLEXnet Licensing Service. If you are unsure whether an item is essential, then leave it deselected (disabled).
Click Apply, and restart Windows for the changes to take effect.
Note: Upon restart, you'll be notified that the System Configuration utility has made changes to the way that Windows starts up. Click OK. When the System Configuration utility appears, click Cancel.
Right-click icons in the Notification Area and close or disable any startup items that are still active.
9. Install Photoshop Lightroom to a different hard disk after disabling startup items and installing from the hard disk.
Hard disk problems can prevent Photoshop Lightroom from installing correctly. By installing Photoshop Lightroom to a different physical hard disk, you can verify if the original hard disk is preventing installation. First, completely remove Photoshop Lightroom from the hard disk.
To install Photoshop Lightroom to a different hard disk after disabling startup items:
Follow the steps in task 8 above to disable startup items.
If Photoshop Lightroom autoplay displays, click Cancel when you are requested to Select the Language.
Copy the Adobe Photoshop Lightroom folder from the Photoshop Lightroom CD-ROM to the desktop.
Open the Adobe Photoshop Lightroom folder on the desktop.
Double-click the Adobe Photoshop Lightroom.msi file, and follow the on-screen instructions.
Click Change and select a different hard disk in the Change Current Destination Folder window. Click OK, and then follow the on-screen instructions.
Intermediate troubleshooting
If the tasks in the previous section don't solve the problem, try the following intermediate troubleshooting tasks.
10. Install and run Photoshop Lightroom in a new user account.
Create a new user account that has the same permissions as the account that you use when the problem occurs. If the problem doesn't recur, the original user account may be damaged. For instructions on creating a new user account, see To add a new user to the computer in Windows Help or contact your system administrator.
11. Optimize handling of temporary files by Windows Vista.
Windows and applications store working data in temporary (.tmp) files that they create on the hard disk. Excessive or outdated temporary files can interfere with performance of Windows or applications.
Delete temporary files by using the Disk Cleanup utility included with Windows or by using the following instructions. Make sure that at least 1 GB of free space is available on the hard disk to which temporary files are written. To start Disk Cleanup, choose Start > All Programs > Accessories > System Tools > Disk Cleanup. For information about Disk Cleanup, see Windows Help.
To manually delete temporary files:
Note: Windows deletes temporary files when Windows and applications close normally. However, when Windows or an application crashes, temporary files can accumulate on the hard disk. Windows may prevent you from deleting some temporary files as they may be in use. Delete as many temporary files as you possibly can, without deleting the files that are in use.
Quit all applications.
Choose Start and type %tmp% in the Search text box and press Enter.
Delete the contents of this folder.
Note the drive letter where this directory is located.
To ensure that at least 1 GB of free space is available on the hard disk to which temporary files are written:
Choose Start > My Computer.
Select the drive noted in step 4. Right click and select Properties.
Confirm the drive has at least 1 GB of free space.
12. Repair and defragment hard disks.
System errors can occur if hard disks contain damaged sectors or fragmented files. Repair and defragment hard disks, either by using the Error-checking tool and Disk Defragmenter utility included with Windows or by using a third-party disk utility. You should run such utilities on each hard disk or partition. More information about the Error-checking tool and Disk Defragmenter appears below; for more information about a third-party disk utility, refer to the documentation for the utility.
The Error-checking tool repairs bad sectors, lost allocation units and file fragments, cross-linked files, and invalid file names. To access the Error-checking tool, choose Start > Computer, right-click the desired hard disk, and choose Properties from the menu. In the Local Disk Properties dialog box, click the Tools tab, and then click Check Now in the Error-checking area.
Note: To prevent Disk Defragmenter from moving files to bad sectors of a disk, run the Error-checking tool before running Disk Defragmenter.
Disk Defragmenter rearranges the files and free space on your computer so that files are stored in contiguous units and free space is consolidated in one contiguous block. To access the Disk Defragmenter utility, choose Start > All Programs > Accessories > System Tools > Disk Defragmenter.
13. Scan the system for viruses.
Use current anti-virus software to check the system for viruses. Virus infections can damage software and cause system errors. For more information, see the documentation for the anti-virus software.
14. Try to install Photoshop Lightroomon a different computer.
Try to install Photoshop Lightroom on a different computer to determine if the problem is unique to your computer. If the problem is unique to your computer, contact the computer manufacturer; if the problem occurs on multiple computers, contact Adobe Technical Support.
Advanced Troubleshooting
If the tasks in the previous section don't resolve the problem, you may be able to resolve the problem by reinstalling Windows Vista and Photoshop Lightroom, reformatting your hard disk and reinstalling Windows Vista and Photoshop Lightroom, or by determining if hardware is conflicting with Photoshop Lightroom.
Disclaimer: Adobe doesn't support hardware and provides these procedures as a courtesy only. For further assistance, contact the hardware manufacturer or an authorized reseller. If you troubleshoot hardware problems yourself, you may void the warranty for your computer.
Note: Before you remove or rearrange hardware, turn off and disconnect power to the computer and any peripheral devices.
15. Log in using the built-in Administrator account.
The built-in Administrator account has a higher access level to the system than a normal local administrator account. By default the built-in Administrator account is disabled. For information about enabling and logging in to the built-in Administrator account, contact your system administrator. You can also refer to this support document on the Microsoft support website: http://support.microsoft.com/kb/926183/en-us?spid=11737&sid=73.
16. Reformat the hard disk, and reinstall only Windows Vista and Photoshop Lightroom.
Reformat the hard disk, and then install only Windows Vista and Photoshop Lightroom from the original installation media. Reformatting a disk erases all files it contains, so be sure to back up all personal files first. Also make sure that you have all application and system disks.
For instructions on performing a clean installation of Windows Vista, see document 918884, "How to install Windows Vista" on the Microsoft website at http://support.microsoft.com.
Note: Don't install additional software or hardware until you're sure that the problem is resolved. Don't back up the hard disk and restore Windows and Photoshop Lightroom instead of reinstalling them. If the problem is caused by an application or Windows, and either one is restored instead of reinstalled, the problem may recur.
After you reformat the hard disk and reinstall Windows and Photoshop Lightroom, try to re-create the problem:
If the problem no longer occurs, then install other applications one at a time and try to re-create the problem after each installation. If the problem occurs after an installation, then the recently installed application may be the cause.
If the problem occurs when only Windows and Photoshop Lightroom are installed, then the cause may be hardware-related, and you should contact the hardware manufacturer or an authorized reseller for assistance.
17. Check for problems with RAM modules.
Ensure that the RAM modules are installed properly and are not the cause of your problem. Do one or both of the following:
Change the order of the installed modules.
Remove all but the minimum number of modules needed to run Windows and [product], and test to see if the problem persists. If it does, replace the modules you removed and remove the others, testing again to see if the problem recurs. If it doesn't, then one or more of the removed modules are the cause. For assistance, contact the RAM manufacturer.

You've tried Help>Updates from within photoshop cs6?
Or this 8.3 updater
http://swupdl.adobe.com/updates/oobe/aam20/win/PhotoshopCameraRaw7-7.0/8.3.52/setup.zip
If that doesn't work, you can install camera raw 8.3 by following the directions on the following page
Adobe Camera Raw Help | Camera Raw/DNG Converter 8.4 on Mac OS 10.6, Windows XP, and Vista

HT201317 i cloud does not work on my windows vista pc

It appears,that for some unknown reason i can not stream ,or upload any of my pictures(JPEG) to my Ipad3 from my Windows Vista2 PC,I was able to upload most of my music(although some were rejected by the Ipads system),I tried Itunes ,ICloud -automatic or manual to no avail.I even purchaised the Photoshop and placed my pictures there,then pointed to that file from ICloud ,still nothing,and the funny part is I am not even getting any error messages or codes,Icloud just freezes for about a minute,and after there is still nothing in my Ipad,I tried even sigle photos,thinking maybe I am going over 5G limit,but no,that was not an issue.At this point I am just frustrated-everything was working when I had ZUNE and uploaded and downloaded pics and music witout any problems...PLEASE HELP(((

Try working through TS1717: iTunes for Windows Vista, Windows 7, or Windows 8: Fix unexpected quits or launch issues to start with.
Otherwise, for general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

Windows Vista/Windows 7

Similar Messages

Maybe you are looking for