Wondering if linked ram is OK for my Powerbook G4 12"

I am thinking of purchasing this ram and I am wondering is it would be compatible with my 12" 1ghz PowerBook G4. It all seems ok to me but I am just double Checking.
http://www.ebay.com.au/itm/1GB-DDR-PC2100-1-GB-PC-2100-266MHz-SODIMM-LAPTOP-MEMO RY-/180678218200?pt=LH_DefaultDomain_0&hash=item2a1142d1d8#ht_1393wt_1168
Thanks
Peter

I cannot agree more here. I recently purchased a PowerBook G4/1.5 from a pretty repultable mac resaler that came with 2 hodge-podge 512mb chips in it that would only see 512 no matter what I did to swap them around.
Biting the bullet, I went over to OWC and purchased a 2 gig upgrade kit for around $66.00 +shipping, a few days wait, a 10 minute install later and smooth sailing on my PowerBook!
Good call on doing your homework and follow-up's on the forums.
~Drake

Similar Messages

2GB RAM too much for 1Ghz Powerbook?

Hi
In order to speed up my G4 17" 1 Ghz Powerbook, especially for Photoshop Elements, I upgraded to 2GB RAM. The Crucial Memory Scanner said that was the max allowable (although I ended up buying Samsung memory from an eBay dealer). My computer seems to be actually working slower now, though it is basically working ok. On looking at the tech spec for my Powerbook from Apple Support I then found this: "two SO-DIMM slots support up to 1GB".
Have I put in too much RAM now (who is right about my memory capacity - Apple or Crucial?), or does it make a difference that I bought cheaper RAM than Crucial or Kingston for example? (Presumably if the RAM was suspect I'd have bigger problems?)
Excuse the scattergun questions - I'm just trying to work out if I'd be better off reinstalling my original pair of 512MB modules, or leave in the 2GB and look at other issues in my computer for improving speed.
Many thanks.

To add to eww's excellent advice, there is a note on my RAM vendor's website page for your PowerBook stating that the 17" G4 1G PowerBook is one of four PowerBooks that uses "bus slewing" and have special RAM requirements.
I recall a couple of years ago there was a little...well, call it a "public disagreement" for lack of a cruder term....among RAM vendors over bus slewing and the right RAM. Crucial was accused in these forums and by other companies of failing to recognize the requirements bus slewing placed on the RAM. However, this seems to have settled down as I see posts here stating more recent Crucual RAM worked. You could call Crucial and ask if the part number you bought supports bus slewing. I'm sure they will make certain you get the correct type from them.
Oops, nearly forgot! Bus slewing is explained in this Apple Technical paper on the 15" 1 G PowerBook. Scroll down about a half page to the section "Processor and Bus Slewing."

RAM Upgrade for G$ Powerbook 1.67GHz

I have a 1.67 GHz Powerbook G4 with 512 Mb RAM I want to replace the two 256MB boards with two 1Gb boards. I think the specs for the or=iginal boasrds are PC2700 DDR SDRAM - can I safely replace these with faster boards - i.e. PC 3200 DDR SDRAM ? Any help greatly appreciated

I hate to pose a second question within a topic but it is related to the g4 1.67 powerbook. Mine is a double layer drive version (best way to differentiate, I suppose), using the pc-4200 sticks. I just upgraded and was curious about a notation within System Profiler. It had 512 to start with, in the lower slot (20, I think it's called). I bought a 1 gig stick, which was quite reasonably priced at put it in. I doubted that buying two gig would give appreciably more performance than 1.5. I installed the 1 gig in the top (meaning closest to the hatch) and ran up the machine. Recognized everything fine, says 1.5 gig in the "about...". When I looked at system profiler, it also showed 1.5; clicking on the memory detail showed 20 and 23 filled with 512 in 20 (original) and 1gig in 23. But, it shows "reversed" in the comment field. I wondered if there was any effect for installing them this way or if I should take both out and put the 1 gig in the bottom slot.
Re: the original question. I'm no powerbook expert but any computer design I know of is limited to the clock speed used on the memory board. The board clock usually is just a derivative (divided) from the main system clock and moves memory one word at a time (to a particular chip set) regardless of chip speed as long as it is the equivalent of the clock or higher. Slower chips will be erratic and cause errors as they slip words by not keeping up with the clock but that's not what was asked. Visualize memory as a bunch of firm spaghetti on a board 64 or 128 strands wide; you take a knife and cut across the ends and slide them to the edge of the board (falling is irrelevant). Then get another cut. That's how input to the memory is moved. More sophisticated designs can use more complex schemes but this is the basic.

What should Ram settings be for FCP 6 doing a slideshow with JPEGS ?

Hi all,
I am doing a Ken Burns effect slideshow in FCP6 that is using JPEGS only.
I have the 24" intel imac 2.4 gig with 4 gigs of Ram installed.
I am wondering what my ram settings in FCP should be.
there are 4 boxes you can fiddle with the numbers.
first two have sliders and go from 0 to 100%
"memory usage"
and also still cache...
what should I be setting these to?
thanks in advance!
I ask because my system bogs right down with only a few layers and effects in place.
what should my sequence settings be as well when working only with JPEG?
I normally edit in easy DV NTSC....

Thanks guys.
I have found that I cannot resize and get a clean movement here in FCP.
I tried the cutting approach jim and that at least got me through the placement of the pics to the song and then I started the motions. I also checked and then unchecked the shadow once I had it set where I wanted. I like to work through each pic from start to finish so i know exactly where I am at each night when I go to bed and then where I start again the next evening after my day job!
haha
but yes unchecking the shadows and feathered edges definately bought me some more time before render.
I appreciate all the helpful advise here. You guys pour so much knowledge out there for us and mostly without even much thanks to you in return.
One question I would still have now that I have fiddled around with all my settings....
would anyone have the time and the knowledge to help me figure out what the "proper" settings should be for my setup for editing regular sd dv ntsc footage?
or when I click easy setup dv ntsc does it configure my system for optimal settings each time?
ie what should my ram settings be?
thanks in advance.
see sig for setup.

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

What RAM is needed for Laserjet Printer CP1525nw Windows 7 64-bit

Hi,
just found your post...
To install your HP1010 on Win7do the following:
Start
Devices & Printers
Add a printer
Adda local printer
Use an existing port: DOT4_001 (Generic IEEE...)
Next
Pick HP from manufacturer
Select HP LaserJet 3055 PCL5
Next
Name the printer something to your liking
Finish (or so, just follow the prompts)
Here you are!
Works every time for me, never had a problem from any application.
I don't know how this forum works and if i am notified if you reply or anyone else posts on this thread, so i try to check it again soon to check if you left a message. Be with me...
Matt

Hello, I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

I am attempting to install Camera raw from a .zip file provided via a link provided by adobe for a Nikon D810. The .zip file unzips fine and I moved the files to the recommended folder. But the operation is failing

Can you describe what “the operation is failing” means? What is happening and how is it different than what you expect?
Also, what product are you trying to update manually, and do you have a link to the page of instructions, so we know what your attempting to do?

My charger broke so I gave my sister the charger, and my iPod touch for proof. She took it to the apple store and traded it for an iPhone 5c. I was wondering if apple can do something for me so I could get my ipod back?

My charger broke so I gave my sister the charger, and my iPod touch for proof. She took it to the apple store and traded it for an iPhone 5c. I was wondering if apple can do something for me so I could get my ipod back?

I have no idea what you meant by giving your sister your "iPod touch for proof". Proof of what?
The only way she could have traded it was recycling it for 10% off the cost of a new device but the Apple Store doesn't do this as far as I know for iPhones. You could take the receipt for your iPhone to the Apple Store and show it to the manager but you really need to solve this within your family.

Embed a web link into an image for email

Embed a web link into an image for email. Anyone knows how to do this?

Fantastic!!
Where did you get that?! I'll try it with the "poster frame" of a movie. I am so grateful. It opens a whole new world.

I just broke my ipad. I've taken really good care of it and had it since the third gen came out (bought it right away) the screen is cracked from the bottom right corner and im wondering if i can replace it for free or even at all please help :(

I've taken really good care of it and had it since the third gen came out (bought it right away) the screen is cracked from the bottom right corner and im wondering if i can replace it for free or even at all please help

You can replace it, but not for free.
iPad mini: $219
iPad 2 or earlier, iPad mini Retina display: $249
iPad 3rd generation or later: $299

Link does not work for-End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4

Link does not work for
End-of-Sale and End-of-Life Announcement for the Cisco Secure Access Control System 5.4
How do we get Cisco to fix?
see attachment

Give it a couple of days - it looks like they just sent out the notification before the notice was published on the public page.
Once the ACS 5.4 EoS/EoL notice is published you should see it linked from this page.

My organization is looking to invest ipads for the employees to perform everyday tasks. just wondering what would apples recommendation be for as far as apps and method of distribution would be?

my organization is looking to invest ipads for the employees to perform everyday tasks. just wondering what would apples recommendation be for as far as apps and method of distribution would be?

Use VPP. Select an MDM. Read the google doc below.
IT Resources -- ios & OS X -- This is a fantastic web page. I like the education site over the business site.
View documentation, video tutorials, and web pages to help IT professionals develop and deploy education solutions.
http://www.apple.com/education/resources/information-technology.html
   business site is:
   http://www.apple.com/lae/ipad/business/resources/
Excellent guide. See announcment post -- https://discussions.apple.com/thread/4256735?tstart=0
https://docs.google.com/document/d/1SMBgyzONxcx6_FswgkW9XYLpA4oCt_2y1uw9ceMZ9F4/ edit?pli=1
good tips for initial deployment:
https://discussions.apple.com/message/18942350#18942350
https://discussions.apple.com/thread/3804209?tstart=0
Educational institutions in the USA can use the App Store Volume Purchase Program (VPP) to buy Apps.
https://support.assistiveware.com/index.php?pg=kb.page&id=54
There are three ownership models:
    *     Personal
    *     Institution
    *     Layered. combines personal & institution.
Watch this apple video on layered ownership. It education based, but that's OK.
http://www.apple.com/education/resources/videos/#ios-layered-ownership
More ways to transfer files and access Word documents:
https://discussions.apple.com/thread/4044866?tstart=0
All of the "Office" document editing applications on the iPad have limitations. Best try them out to see if they meet your needs.
iWork by Apple
    * Keynote
    * Numbers
    * Pages
DocsToGo
• VIEW/EDIT/CREATE Word & Excel files(Office 2007/2008/2010)
• VIEW PowerPoint, PDF, iWork, Text, .RTF, and more!
• Send & receive attached supported documents using the built-in Mail app
• FREE desktop application with your purchase! Compatible on Win & Mac allows you 2-way file sync with a WIFI connection.
• Open & Edit files within DocsToGo from any 3rd party app that supports the “Open In” feature
• Supports iTunes File Sharing via USB cable for manually moving files
https://itunes.apple.com/us/app/documents-to-go-office-suite/id317117961?mt=8
Office² HD
"Office² HD, the most intuitive and straightforward office document editor available on the iPad, makes it easy to open, view, create and edit Word (DOC & DOCX), Excel (XLS & XLSX), and PowerPoint (PPT & PPTX) files right from your iPad!"
https://itunes.apple.com/us/app/office2-hd/id364361728?mt=8
Quickoffice Pro HD
Create and edit ALL Microsoft® Office -- document, spreadsheet, and presentation formats, as well as view PDF files, on the go. Our advanced file manager lets you manage local files, access Google Drive or other cloud accounts, and works with your iPad email attachments so you can work anywhere, anytime - online and offline.
https://itunes.apple.com/us/app/quickoffice-pro-hd-edit-office/id376212724?mt=8
nsdjoey presents ways to edit office documents in this web page:
https://discussions.apple.com/message/21953221#21953221

OTL Error - Hrs - Element link does not exist for the duration of the entry

Hi,
We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
I have re-run the security list generation (we are using static list).
The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
We are using 11.5.10.2
Thankss

Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)

Link Material Document generated for material movement due to production

Hello Expert,
I am creating a zreport for Material Consumption during Production. I am assuming Confirmation entry in PP module as a base of this report and linking to Material Movement data in MM Module. But I am not able to link this data from tables.
Can you pls guide me how to link Material Document generated for material movement due to production confirmation entry and actual production confirmation entry.
Thanks
Shailendra

Hi Shilendra ,
You can create a report with the logic. That all the materials which are created due to backflushing confirmation are created with movement type 131 and the component material are consumed by movement type 261.So you can create the report with this logic.
Dont forget to award Points if it helps.
Lekhram

[svn:fx-trunk] 10866: Fix broken links in ASDoc comments for TLFTextInput. as and TextArea.as, and add OverrideBase.as to ASDoc output

Revision: 10866
Author:   [email protected]
Date:     2009-10-05 08:56:44 -0700 (Mon, 05 Oct 2009)
Log Message:
Fix broken links in ASDoc comments for TLFTextInput.as and TextArea.as, and add OverrideBase.as to ASDoc output
QE notes: -
Doc notes: -
Bugs: -
Reviewer: -
Tests run: - checkintests
Is noteworthy for integration: No
Modified Paths:
    flex/sdk/trunk/frameworks/projects/framework/src/mx/states/OverrideBase.as
    flex/sdk/trunk/frameworks/projects/spark/src/mx/controls/TLFTextInput.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/TextArea.as

Sorry about that. I am not exactly sure where the problem is, but I know it takes place after I put the <nav> in (in the html portion). If I understand what I am learning, the CSS at the top will structure my html code so I would have thought the CSS tageting my nav would be the focus. Maybe it is a different section though.
CSS part:
nav p {
font-size: 90%;
color: #FFC;
text-align: right;
font-weight: bold;
background-color: #090;
padding-top: 5px;
padding-right: 20px;
padding-bottom: 5px;
border-top-width: 2px;
border-top-style: solid;
border-top-color: #060;
HTML part: (bold italic is the part I added)
<body>
<div class="container">
<div id="apDiv1"><img src="Lessons/images/butterfly-ovr.png" width="170" height="158" alt="GreenStart Logo"></div>
<header></header>
<nav>
    <p>Home | About Us | Contact Us</p>
</nav>
<div class="sidebar1">
    <ul class="nav">
      <li><a href="#">Green News</a></li>
      <li><a href="#">Green Products</a></li>
      <li><a href="#">Green Events</a></li>
      <li><a href="#">Green Travel</a></li>
      <li><a href="#">Green Tips</a></li>
    </ul>

Work flow? How to link multi-cam sequences for DVD output?

Pr cs4 (very new)
Still taking baby steps each day... please take my hand and help me!
Final output will be 2 DVD's (each DL) each about 2 hrs. Content are chamber music student groups in two recitals.
I have assets from two camera angles. I have successfully practiced on one of the groups performance (10 min.) following the steps illustrated in a multi-cam tutorial. http://www.adobe.com/designcenter/video_workshop/?id=vid0234
This leaves me with a great multi-cam sequence for that group located in the Project Panel, exactly what I want.
Now, I want to know what is the best method (workflow?) to ultimately produce a DVD containing about 10 of these type performances (one after the other) with chapter markings for each group, titles etc.?
I have yet to use Encore and I'm guessing that is where I'll send the finished edit for DVD production, though I don't know at what step I jump there?
Do I try to create one very long multi cam sequence of all the content, then send to Encore? Or can I create seperate multi-cam sequences (each performance) then link them together, adding transitions and make the DVD? This would be my preference to keep things more manageable, especially with audio synching.
With my practice multi-cam sequence on the timeline, I tried to drag the same sequence from the Project Panel to the end of the timeline to simulate how this would work, but it does not add to the timeline as a clip would.
This is probably childs play for you pro's, but we were all baby's at one time...I just happen to still be one!
Thanks for your patience and advice,
Kenny

Yes I did...now toss me a cookie please.
I am trying to quickly get up to speed in Pr CS4 to get this project completed. In the process, I'm trying to learn and understand the interface and correct terminology so as to make my questions intelligible to a community that posses vastly greater understanding than myself.
Is there anyone who can help with my main question at hand? Namely, how to go about creating a full length sequence (in the timeline) made via the nesting of synchronized multi-camera clips within a new "multi-cam sequence"?
As I said, I have completed a small test sequence in this fashion, nesting clips in a new sequence then using multi-cam monitor to record cuts. Now I need to add about 10 more of these together in a completed sequence to then send to DVD production.
Is this intelligible?
Thanks, Kenny
__0
_ \<,_
Date: Wed, 4 Nov 2009 09:11:06 -0700
From: [email protected]
To: [email protected]
Subject: Work flow? How to link multi-cam sequences for DVD output?
please take my hand and help me!
Well, at least you had the gumption to admit that up front.
>

Wondering if linked ram is OK for my Powerbook G4 12"

Similar Messages

Maybe you are looking for