XML data from Form?!?!
I've used LD8.0 to create a feedback form for my customers (it's at http://www.raven-multimedia.com/Feedback.pdf for reference). The first time I created it it was fairly large (1.4MB) and when a user clicked the submit-by-email button the data file attached to the message was a very small XML file {which I had no problem importing into my form to get the results}.
In fiddling with the form to try to make the file online smaller I've done SOMETHING which has resulted in a smaller form (now about 590kb), but when submitted by email the
entire form
is attached in PDF format!
How do I (or is there any way to...) keep the form itself SMALL and make sure that the data file sent to me is XML (thus small) too?!?!
I'm also interested in making the form as compatible as possible, which means an earlier version of Acrobat, but again run up against the problem that earlier version seems to mean larger file size.
Any and all help will be appreciated!
Thanks in advance,
Jim 8^O
PS- Oh, hey, can anyone tell me why I can't import Text data to my form?!?!
He that can have patience can have what he will.
The size of the image you embedded is overkill!
Try resizing the original image to about 100*120 px (not sure about the exact size). Remove the original image, embed the resized one. This way you may save another 400 KBytes. In the image's 'draw'-tab select 'use original size'.
Also, do not save the image as jpg but gif. You don't need to use jpg as the image does not feature lots of different colors. That one may save you another... 30 KBytes at least.
You want to send XML data? Follow these steps
Sending complete PDF on eMail-submit but instead of 'PDF', select 'XML' in the options.
Similar Messages
-
Read/write xml data from/to adobe livecycle forms (pdf)
Hello,
I need some help reading xml data from pdfs created by Adobe LiveCycle and also writing xml data back to the form.
The forms have been created using PROD LC 8.2 and in the future they will be created using PROD LC 9.5.
I am using Visual Basic .NET to access the data programatically.
Can anyone help me with some hints? A library, SDK? Any information would be very helpful.
I am quite new with this Electronic Forms issue and I do not even know where to start.
Thank you,
IonelHi lonel,
Do you want an online solution?
I mean, it follows this workflow:
1. The user will open the PDF by clicking a link, and a server-side program will generate the PDF and prepopulate it with data from some data sources, and render the PDF to the client (Browser),
2. The user will fill the PDF.
3. The user will click a Submit button and save the PDF and Data on the server.
4. If the user wants to edit the Submitted Form, he will click a link to open the save PDF and possibly prepopulate some fields with data from other data sources, and complete the cycle of filling and saved the PDF and Data on the server.
5. While the user is filling the PDF (inside a Browser), there might be a need to perform some lookup on the server, and update the form parts accordingly as a result of the lookup process.
For 1-4 above, I have developed a complete base library using ASP.NET which helps you to perform the above.
You can goto my Google Workspace and you will find a bunch of documents, sample PDFs, collections and VB Classes. To best view them, login using some Google Account.
For point 4 above, one way to perform this effect, is to regenerate the required XML Data (which has the saved data before and the new lookup data), remerge the entire XML result with and empty PDF Form, and render the XFA (PDF Form) back to the client. But, if the PDF has one or more signatures, it will not work. So, in this case, you can update the Form Fields of a Saved PDF Form with new Data from the server, but the net effect is that you will have to loose all the signatures that were added on the PDF before.
For 5 (above) there are 3 methods:
1. Using a Web Service as a Data Connection. This is very easy if you have a traditional Web Service. I have used this method several times and will use it again if the need be. But, there is a problem. If the result of the Web Service is an Array of some Data, and you want to remerge the XFA to get the required effect after executing the web service ... and ... if there are some Drop-Down-List (DDL) fields, the bindings of the DDL Items of those fields will be lost. But, you can rebuild them (on enter event of the DDL Field) if you have saved them in the embedded XML Data.
2. You can update few (not many) fields while the PDF is opened (under the Browser via IFRAME) by passing the new field values using the URL Query String method. I have not done this, but I like this method, and I think it is cool. You need to write a server side code to ensure the the new filed values are passed back to the client using the correct URL with the Query String, and you need to write some javascript code inside the PDF to parse the URL and get the new field values and update them accordingly. See this as an example:
http://www.halnesbitt.com/pages/pdfqs.php
3. This method is very advanced and uses message communication ques between the Browser and the PDF (which is opened inside IFRAME element) using HostContainer object. This method will enable 2-way communication between the Browser and the PDF on the client side using javascript. I'd love to use this method one day. See example here:
http://www.windjack.com/WindJack/Browser2PDF/brwsr2acroJS.htm
I hope this will be of help to you.
Tarek. -
Using REGEXP_REPLACE to remove XML data from between XML tags
Hello there,
I am trying to use the REGEXP_REPLACE SQL function on a piece of XML, to remove the actual XML data from the elements. My end goal is to end up with a comma-delimited list of XML element names. As part of the first step, I just want to rip out all the actual data.
I tested the following query, and it initially appeared to work:
SELECT REGEXP_REPLACE('>THIS IS A TEST<',
'>([[:alnum:]]\s|\S)*<',
'><' ) AS test_result
FROM dual;Unfortunately, when I applied this to a full XML string, it didn't work. Here is the test query I used:
SELECT REGEXP_REPLACE('<ROW><TEST_ELEMENT1>123</TEST_ELEMENT1><TEST_ELEMENT2>THIS IS A TEST!</TEST_ELEMENT2></ROW>',
'>([[:alnum:]]\s|\S)*<',
'><') AS test_result
FROM dual;I ended up with the following output:
*<ROW></ROW>*
What I was trying for was:
*<ROW><TEST_ELEMENT1></TEST_ELEMENT1><TEST_ELEMENT2></TEST_ELEMENT2></ROW>*
If you're reading this and you're a Posix RegExp Guru, please could you let me know exactly where I'm going wrong? RegExps are not my strong point, but I'd like to get better at them.jmcnaug2 wrote:
Just out of interest, how would you go about writing the XQuery function so that it returns the actual XML Element values in comma-delimited form (This is Oracle Canonical XML, so has a very basic layout)? ;)Do you mean like this ?
SQL> SELECT xmlquery(
2 'for $i in $d/ROWSET/ROW
3 return string-join($i/*, ",")'
4 passing dbms_xmlgen.getXMLType('SELECT employee_id, last_name, first_name FROM employees WHERE rownum < 10') as "d"
5 returning content
6 ).getClobVal() as csv
7 FROM dual;
CSV
100,King,Steven
101,Kochhar,Neena
102,De Haan,Lex
103,Hunold,Alexander
104,Ernst,Bruce
105,Austin,David
106,Pataballa,Valli
107,Lorentz,Diana
108,Greenberg,Nancy
SQL> -
Not able insert ,query data from forms
hi,
I am not able to insert data or query data from forms(10g devsuite).getting error frm-40505,frm 40508 .i am able to insert and select record from sql plus.the block ihave created is control block .it is connected to the table using the properties.
should i do anything to insert record.please helpthe block ihave created is control block .it is connected to the table using the properties.A Control Block, by definition, is a non-database block. This means the block is not directly connected to a table so you have to manually display data in the block and any DML you want to perform on data in this block you must do manually as well.
There are four database objects you can base your database block on; 1) a Table, 2) a View, 3) From Clause Query (basically an In-line View), and 4) a database stored procedure. I recommend you use one of these four methods rather than manually display your data.
Craig... -
Query xml data from a CLOB datatye
All,
I read in an oracle white paper that is is possible to query XML data from CLOB datatype using oracle text index using operators HASPATH() and INPATH(). I am not able to find any example on how to do this. Can someone please post a simple example here.
Thank You very much!SCOTT@10gXE> CREATE TABLE your_table (id NUMBER, xml_data CLOB)
2 /
Table created.
SCOTT@10gXE> INSERT INTO your_table (id, xml_data)
2 SELECT t.deptno,
3 DBMS_XMLGEN.GETXML
4 ('SELECT d.dname,
5 CURSOR (SELECT e.ename, e.job
6 FROM emp e
7 WHERE e.deptno = d.deptno) emp_data
8 FROM dept d
9 WHERE d.deptno = ' || t.deptno)
10 FROM dept t
11 /
5 rows created.
SCOTT@10gXE> COMMIT
2 /
Commit complete.
SCOTT@10gXE> begin
2 ctx_ddl.create_section_group('xmlpathgroup', 'PATH_SECTION_GROUP');
3 end;
4 /
PL/SQL procedure successfully completed.
SCOTT@10gXE> CREATE INDEX myindex
2 ON your_table(xml_data)
3 INDEXTYPE IS ctxsys.context
4 PARAMETERS ('datastore ctxsys.default_datastore
5 filter ctxsys.null_filter
6 section group xmlpathgroup'
7 )
8 /
Index created.
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'PERSONNEL INPATH (//DNAME)') > 0
3 /
ID XML_DATA
50 <?xml version="1.0"?>
<ROWSET>
<ROW>
<DNAME>PERSONNEL</DNAME>
<EMP_DATA>
</EMP_DATA>
</ROW>
</ROWSET>
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'HASPATH (//DNAME="PERSONNEL")') > 0
3 /
ID XML_DATA
50 <?xml version="1.0"?>
<ROWSET>
<ROW>
<DNAME>PERSONNEL</DNAME>
<EMP_DATA>
</EMP_DATA>
</ROW>
</ROWSET>
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'CLARK INPATH (//ENAME)') > 0
3 /
ID XML_DATA
10 <?xml version="1.0"?>
<ROWSET>
<ROW>
<DNAME>ACCOUNTING</DNAME>
<EMP_DATA>
<EMP_DATA_ROW>
<ENAME>CLARK</ENAME>
<JOB>MANAGER</JOB>
</EMP_DATA_ROW>
<EMP_DATA_ROW>
<ENAME>KING</ENAME>
<JOB>PRESIDENT</JOB>
</EMP_DATA_ROW>
<EMP_DATA_ROW>
<ENAME>MILLER</ENAME>
<JOB>CLERK</JOB>
</EMP_DATA_ROW>
</EMP_DATA>
</ROW>
</ROWSET>
SCOTT@10gXE> SELECT * FROM your_table
2 WHERE CONTAINS (xml_data, 'HASPATH (//ENAME="CLARK")') > 0
3 /
ID XML_DATA
10 <?xml version="1.0"?>
<ROWSET>
<ROW>
<DNAME>ACCOUNTING</DNAME>
<EMP_DATA>
<EMP_DATA_ROW>
<ENAME>CLARK</ENAME>
<JOB>MANAGER</JOB>
</EMP_DATA_ROW>
<EMP_DATA_ROW>
<ENAME>KING</ENAME>
<JOB>PRESIDENT</JOB>
</EMP_DATA_ROW>
<EMP_DATA_ROW>
<ENAME>MILLER</ENAME>
<JOB>CLERK</JOB>
</EMP_DATA_ROW>
</EMP_DATA>
</ROW>
</ROWSET>
SCOTT@10gXE> -
Reading XML Data from ABAP Program?
Hi,
How do I read XML Data from an ABAP Program? For example if I have the below basic XML Code-
<xml>
<Name> Thiru </Name>
<Age> 24 </Age>
<City> chennai </Chennai>
</xml>
How do i read the data within the Name,Age, and City tags into variables in the ABAP Program?
Regards,
Thiruif you decide to do in XSLT, I have a sample list here:
XML file like this:
<?xml version="1.0" encoding="UTF-16"?>
<F>
<P1>
<t_1>value1</t_1>
<t_2>testvalue</t_2>
</P1>
<P2>
</P2>
</F>
XSLT file like this:
<xsl:transform xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:sapxsl="http://www.sap.com/sapxsl" version="1.0">
<xsl:strip-space elements="*"/>
<xsl:template match="F">
<asx:abap xmlns:asx="http://www.sap.com/abapxml" version="1.0">
<asx:values>
<<b>DOCUMENT</b>>
<xsl:apply-templates/>
</<b>DOCUMENT</b>>
</asx:values>
</asx:abap>
</xsl:template>
<xsl:template match="P1">
<ENTRY>
<<b>T_1</b>><xsl:value-of select="t_1"/></T_1>
<<b>T_2</b>><xsl:value-of select="t_2"/></T_2>
</ENTRY>
</xsl:template>
</xsl:transform>
ABAP program like this:
DATA: BEGIN OF wa_upload,
text(255) TYPE c,
END OF wa_upload,
itab_upload LIKE TABLE OF wa_upload,
BEGIN OF wa_document,
t_1 TYPE string,
t_2 TYPE string,
END OF wa_document,
itab_document LIKE TABLE OF wa_document.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
filename = 'XXXXX'
filetype = 'ASC'
TABLES
data_tab = itab_upload.
CALL TRANSFORMATION zrappel_xml_test
SOURCE XML itab_upload
RESULT <b>document</b> = itab_document.
You should pay attention to the bold words.
hope it will be helpful
thanks -
Parsing an xml data from a buffer
I have an XML file loaded into a string buffer in java. I would like to know if I can parser XMl data from that buffer using the SAX parser. I do not want to load the xml using the parser, I would like to load the buffer instead.
Thanks in advance,
Sudheer.StreamSource ss = new StreamSource(new StringReader(myString));
transformer.transform(ss, new StreamResult(outputFile)); -
How can I get xml data from KM?
Hi guys,
how can i get a xml data from KM?
I saved an xml document in KM, and I want to read its content. How can I get this document?
Using
DocResource = (IResource) resFactory.getResource(RID.getRID("Document/ Path"),resContext)?
I want to know which kinds of API of KM are responsible for this.
Thanks in advance
Regards,
LiyingHi Liying
use this code.
try {
IWDClientUser wdClientUser = WDClientUser.getCurrentUser();
IUser sapUser = wdClientUser.getSAPUser();
com.sapportals.portal.security.usermanagement.IUser ep5User =
WPUMFactory.getUserFactory().getEP5User(sapUser);
IResourceContext resourseContext = new ResourceContext(ep5User);
IResourceFactory resourseFactory = ResourceFactory.getInstance();
RID pathRID =
RID.getRID(
"/documents/"(Path to folder where ur file is"");
ICollection collection =
(ICollection) resourseFactory.getResource(
pathRID,
resourseContext);
IResourceList resourceList = collection.getChildren();
IResourceListIterator resourceListIterator =
resourceList.listIterator();
while (resourceListIterator.hasNext()) {
com.sapportals.wcm.repository.IResource resource =
resourceListIterator.next();
try {
/*File from KM Reading*/
InputStream in = resource.getUnfilteredContent().getInputStream();
ByteArrayOutputStream out = new ByteArrayOutputStream();
byte[] buffer = new byte[4096];
int bytesread = 0;
while ((bytesread = in.read(buffer)) != -1) {
out.write(buffer, 0, bytesread);
String dataToBeConvertedToXML = out.toString();
catch(Exception e){}
catch(Exception e){}
Award points if found usefull.
I suppose you have used KM sharing reference in ur application
Regards
BP -
Export data from forms to excel
HI
In my application im trying to export data from forms to excel.Everything works fine.First of all im using get_file_name for selecttion of file and passing it to ole2 package as follows
FILENAME := GET_FILE_NAME(File_Filter=> 'XLS Files (*.xls)|*.xls|',dialog_type=>SAVE_FILE);
ARGS:=OLE2.CREATE_ARGLIST;
oLE2.ADD_ARG(ARGS,Filename);
OLE2.INVOKE(WORKSHEET,'SAVEAS',ARGS);
The problem is if i select an existing file the get_file_name itself raises one message ".....file already exists Replace an existing file?"
Similarly the excel also also raises the same message "".....file already exists Replace an existing file?".I want to suppress atleast one of them? Could anyone help for this problem?
appreciate ur help
THANKSLooks like...
ole2.set_property( ex_app, 'DisplayAlerts', false );
where "ex_app" variable Excel Application -
ex_app:= ole2.create_obj('Excel.Application');
and more Question:
When i close excel app - in process viewer i see "excel.exe"
ole2.release_obj don't work :( -
Exporting Data from Forms to Excel
Hi,
How can I export the data from Forms to Excel like which Export function in the Oracle Applications.
Thank you,
VoonHello,
By using dde package you can export the data from Form to Excel. Here is the sample code which i have used. you can write this code in the when_button_pressed trigger.
declare
appl_name varchar2(255);
channel_id pls_integer;
application_id pls_integer;
x number;
y number;
V_TIME VARCHAR2(30);
begin
if :global.application_id is not null then
message('Application already open');
else
appl_name := 'c:\program files\microsoft office\office\excel.exe';
:global.application_id := dde.app_begin(appl_name,dde.app_mode_normal);
end if;
if :global.channel_id is not null then
message('Communication channel already established.');
elsif :global.application_id is null then
message('Application must be launched first.');
else
:global.channel_id := dde.initiate('excel','book1');
end if;
DDE.POKE(:global.channel_id,'R1C1','Col1 Heading',DDE.CF_TEXT,1000);
DDE.POKE(:global.channel_id,'R1C2','Col2 Heading',DDE.CF_TEXT,1000);
DDE.POKE(:global.channel_id,'R1C3','Col3 Heading',DDE.CF_TEXT,1000);
FIRST_RECORD;
X := No of Records;
for y in 2..x
loop
launch_excel is a program unit--
launch_excel(y,:global.channel_id,:block.item1,:block.item2,::block.item3);
next_record;
end loop;
FIRST_RECORD;
EXCEPTION
WHEN DDE.DDE_APP_FAILURE THEN
MESSAGE('Could not launch application for DDE operations.');
RAISE FORM_TRIGGER_FAILURE;
WHEN DDE.DDE_INIT_FAILED THEN
MESSAGE('Could not initialize DDE communication channel.');
RAISE FORM_TRIGGER_FAILURE;
WHEN DDE.DMLERR_NO_CONV_ESTABLISHED THEN
MESSAGE('Could not establish DDE communication channel.');
RAISE FORM_TRIGGER_FAILURE;
WHEN OTHERS THEN
MESSAGE('Error: '| |TO_CHAR(SQLCODE)| |' '| |SQLERRM);
RAISE FORM_TRIGGER_FAILURE;
END;
LAUNCH_EXCEL
PROCEDURE LAUNCH_EXCEL(
y in number,
channel_id pls_integer,
param1 varchar2,
param2 VARCHAR2,
param3 varchar2) IS
v_rowno varchar2(20) := 'R'| |y;
BEGIN
dde.poke(channel_id,v_rowno| |'C1',col1,dde.cf_text,2000);
dde.poke(channel_id,v_rowno| |'C2',col2,dde.cf_text,2000);
dde.poke(channel_id,v_rowno| |'C3',col3,dde.cf_text,2000);
EXCEPTION
when others then
message('Error --'| |sqlcode| |sqlerrm);
message('Error --'| |sqlcode| |sqlerrm);
raise form_trigger_failure;
END;
null -
Group xml data from different sql queries in data template
Hello,
I need to do a mailing program with bursting that sends differents alerts in one mail.
For example i can have alerts for late orders, alerts for shipping not confirmed, so really different address (I dont want to use union). I have done three sql statement in data template , it gives the following ouput.
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_1>
<ALERT>
</ALERT>
<ALERT>
</ALERT>
</G_ALERTS_1>
</GA_EMAIL>
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_1>
<ALERT>
</ALERT>
</G_ALERTS_1>
</GA_EMAIL>
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_2>
</G_ALERTS_2>
</GA_EMAIL>
I woud like the bursting or data template to group alerts when email is the same, because here it sends an email for each different alert.
Ideal output would be:
<GA_EMAIL>[email protected]</GA_EMAIL>
<G_ALERTS_1>
<ALERT>
</ALERT>
<ALERT>
</ALERT>
</G_ALERTS_1>
<G_ALERTS_2>
</G_ALERTS_2>
</GA_EMAIL>
But I don't know how to group different sql statements on a common field (email)
Any ideas ?
Thanksthe for-each group works well in a rtf template, but the rtf template is only applied after the bursting (in order I get first data template (instead of a report) -> bursting -> rtf template)
I want to be able to group xml data from the data template, so I can do bursting (by email ) but only once per mail. -
Shifting of data from forms to word (arabic)
In one of our ongoing project we need to pass some data from forms to
word document , in some cases the Shifting of data takes Place mostprobably when we used / character . The Format of data in Arabic and English .
example:-
T C 3/5
get shifted into T C 5/3
character . the data in arabic and english.
Any conclusion.
Regardshi
do u have any Idea abou calling a Function Module (F.M)..
1.The form interface in the smart form do the same as Functionmodule interface..
2.when u r running the Smartfrom means u need to send some data to the smartforms and u will get some return parameters... this form interfaces do the same...i) Import tab in form interface is used give some inputs to the form
ii) Export tab in form interface is used return some inf Form Smartform to Calling Program.
iii) the Table tab is used to send the Internal table data.
3.retriving data form Database table... u can achive this in two ways..
i) selectin data in drivere program or calling program and send that to Smart forms.
ii) selecting the data in the smartforms... you can write the code in GLOBAL DIFINATIONS-->INITIALIZATIONS tab.. Note:!!! when u want to use intenal tables or variables in initialization tab.. u have to pass them in INPUT AND OUTPUT PARAMETERS of the INITIALIZATION tab.
Please Close this thread.. when u r problem is solved
Reward if Helpful
Regards
Naresh Reddy K -
Carrying data from form to form
Hi
I have a problem with carrying data from form to form.
Once a user logs in I want their name to appear on each screen of the application.
I tried storing the name from the textfield using : textField.getString();
But I keep getting an empty string as its picking up the blank textfield,
How do I save the name that the user enters and be able to carry it on to all the other forms?
Thank you for your help,
Kind RegardsAccording to my knowledge
You have two options for storing login information.
One way is to store Login info in the record store. but i think it is not a good one, as your session expires you should not require the login cache. so you should delete that data for better operations.
Second option is to create a class which can act as a cache memory for your program.
Follow these steps for this options.
1. Create a cache class with all the public variables which you want to access.
2. Create an object from main midlet of this class.
3. Pass this object in each form with navigation.
4. So every variable can be accessible from all the forms as object of this class is instantiated only once.
Thank You. -
How to save data from form into database
i nid to save data from form into the new table, @abc.
got any idea ?
smtg like oObj = BaseAddOn.Company.GetBusinessObject(SAPbobsCOM.BoObjectTypes.oPurchaseDeliveryNotes) this but it is a new object or user data source.
Thankshi
i have created UDO i have also done registration i want to bind item master completely to matrix and then in one column i will set check box to check unchecked and then i want to save it to database
i have one user defined form and 4 matrix and 4 child tables
for each matrix i have given 1 form and i have to transfer the data from temp form to main form matrix having large data in matrix on temp form to main form matrix
to load data on matrix i have used for loop that i want to avoid so how i can bind large data to matrix without for loop
regards
amey -
I'm trying to read some XML data from temperature logger over my network. I'm using LabView version 2009 sp1. I'm using the URL Get Document Vi. It works fine when using Internet sites like google or foxnews etc...
When I use it with my temperature logger most of the time I get an Error 66...but some times it does work and actually retrieves the document.
I can use the same address "http://172.22.21.68/XMLfeed.rb" (Internet Explorer or Google Chrome) in my browser and get a response every time. When accessing from my browser the server in the temperature logger does take around 6 seconds to respond, but it does respond every time.
Is the URL Get Document Vi exceeding a timeout? If so, where can I set it to wait longer?
Attachments:
Error 66.jpg 183 KBIt looks like the TCP Buffered Read has a 2.5 sec timeout, I believe that is where I had trouble as well. Try creating your own URL Get HTTP Doc vi in which you call URL Get Document in normal mode, with an appropriate number of characters to fetch (enough characters so that you capture all the important data in the XML file).
Attachments:
ex1.PNG 33 KB
Maybe you are looking for
-
I have problem with buy in my visa
hello i have problem with buy if i want buy show me this massge ( your purchase could not be completed ) for assistance, contact itunes support at www.apple.com
-
How can i transfer my new purchased itunes apps to my itunes library
actually having several problems, installed itunes on a new computer, have transfered/sync all of my existing ipod touch apps/music successfully. I purchased new apps and a movie, but they do not appear on my itunes library, how can i transfer these
-
While creating InitialContext I have got error that server was not found...
Hello. On the server console I'v seen next message: java.util.EmptyStackException at weblogic.utils.collections.Stack.pop(Stack.java:72) at weblogic.rjvm.InboundMsgAbbrev.getAbbrev(InboundMsgAbbrev.java:85) at weblogic.rjvm.MsgAbbrevIn
-
Oracle VM Manager 3 fails to auto discover VM servers
Hi, It seems the OVM Manager 3 has stopped communicating with the 2 VMservers in the server pool . The 2 servers are in starting (error) status marked red . There have been many auto discover events / jobs running against the 2 servers which fail wit
-
HI All , To maintain stock of material based on SLED , check the following : a ) Remaining shelf life in PO b ) SLED in PO c ) SLED at GR regards deepu