0 byte txt file using receiver File Adapter

HI,
My scenario is Flat File to Fixed Length File.
Mapping : Based on the condition Reciever node need to generated , In some cases it wont generate any node ( No data )
Receiver Communication channel : I used FCC for Fixed length Format.
Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
Could not process due to error: java.lang.Exception: Exception in XML Parser (format problem?):'java.lang.Exception: Message processing failed in XML parser: 'Conversion configuration error: Unknown structure 'ns0:Message1' found in document', probably configuration error in file adapter (XML parser error)'
I need the receiver file to generate with 0 bytes when there is empty data.
can any one help on this.
Thanks

Hi,
>>Problem : When i am generatingf the receiver file with some data it executes. But when i am generating the file with no data , it fails in the receiver comminication channel.
What happens in this case is, when you send a blank file to PI it processes but once it went to Receiver Adapter, it looks out for some fields because of the FCC settings. So it throws an error/exception because some fields are expected and it is not coming. Because of that you getting below exception.
Secondly, Once you send data with few values or fields it will process in Receiver file adapter FCC and if there is some error it throws error. this is why you getting exception in moni, and other places.
Regards
Aashish Sinha

Similar Messages

How to ignore the empty file using Receiver file adapter with Coma separato

Hi,
I am trying to create the .csv file at the receiver but when there is no data I wan to ignore the file even I do not want to create the file with comma also (I just went and check in my file system created with commas)
Source1 -> T1
       T1
        -> S1
              ->Field1
              -> Field2
Because I am using receiver side FCC populating with empty node
Based on condition T1 is populating when condition fails I am populating target T1 and structure elements are mapped with constant.
Ex: Target payload when condition failed below data is populating ..
In this I want to ignore creating the file.
<T1>
<S1>
<Field1/>
<Field2/>
</S1>
</T1>
Here Is the my content conversion parameters,
S1.fieldNames - Field1,Field2
S1.fieldSeparator - ,
S1.endSeprator u2013 u2018nlu2019
I used processing tab u2018Ignoreu2019 option id did not worked. Appreciate your help.
Regards,
Venu.

Hi Raj,
   I went my receiver mapping signature tab I chagned occurance from 1 to 0..1
then my mapping got lossed now message type level I put the condition. When my condition not satisfy I am not creatin gthe target node itself.(I mean here message type) Messages ->message1 only is creating..
but in SXMB_MONI below error I am getting..
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="MAPPING">GENERIC</SAP:Code>
<SAP:P1>Split mapping created no messages</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Split mapping created no messages</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Thanks for your response.
Regards,
Venu.

Send multiple files in different directories using Receiver File Adapter

Hi Experts,
I have one File to File without ESR scenario where I have to pick multiple files from different directories and to save them in different directories on receiver side.
Can anyne help me to send multiple files in different directories using receiver file adapter.
Is it possible??
Any help will be appreciated.
Regards,
Danish

hi ,
that is possiable without esr,
we need to create one sender communication channel , in that we nend to use "adavnced selection for source file " for sending multiple files from multiple directories.
we need to create 'n' receiver communication channels and 'n' receiver agreements based on communication channels .
in receiver determination, provide multiple receivers
In interface determination , provide * symbol for receiver communication components
thanks,

Save file in multiple directories using receiver file adapter?

Hi,
Is it posible to save file in multiple directories using receiver file adapter?
Regards,
Ashish

Well, there is a round about way to do that -
The idea is to use multi mapping. 1:n mapping
1) Map ur message to 2 different record set nodes. Since you want to use the same file both the mapping will look exactly the same. make sure that the filepath and filename are a part of the output payload message
2) In the file adapter config. make sure the the file name and file path are from these payload fields. You can use a context object to refer these fields. Voila...the files are created in the 2 direcoties you mentioned.
of course the simplest way is to route the same message to 2 business systems/services and write them out using 2 ccs.,
Arvind R

Having Some unknown characters in my file of Receiver Mail Adapter

Hi All,
        I have a unique problem, I am having special characters( #S@u201D E" E$ u201Däu201Där 4TåE$R   D0u201CC3 u0192    c@u201DÔôETÄPu201Du201Eu20220u201D 3@u201C ó ró# u20ACu201C ó# ó# u2019 ) in text file of Receiver Mail Adapter.I am providing you a part my input text file
1747021     000070     0001     Production Baseline     ZTAN          100A     0039     2204229-1     50     PLANT3002     Honeywell Aerospace Bournemouth - R     3212774     NOZZLE     HIS     M22     12/31/2008     01/05/2009              1.000              1.000            1.000     01/05/2009
1745558     000100     0001     Production Baseline     ZTAN          100A     0039     801137-1     80     304030     LUFTHANSA TECHNIK AG     45111378001     WHEEL     HIS     M22     12/30/2008     01/12/2009              3.000              3.000            3.000     01/12/2009     COOP Legacy Notes - Note Type: 07N UPDATE AS OF 11/8 SH AVS Legacy Notes - Note Type: AB 1. A QTY OF 53 NEW PARTS WERE PURGED ON 3-5-99 PER KAREN MOSS' REQUEST. PARTS ARE SUSPECT OF BEING DAMAGED DUE TO BEING STORED IN ASRS IN A METAL TO METAL SITUATION.
1740335     000100     0002     Production Baseline     ZTAN          100A     0039     3176647-4     80     341734     SAUDI ARABIAN AIRLINES CORP     8233950     VALVE, CONTROL     Jaroslav Kral     M18     12/24/2008     12/31/2008              1.000              1.000            1.000     01/23/2009     COOP Legacy Notes - Note Type: 07N D PARTS NEED TO CHEC WITH LUPE WIN ISSUIN COOP Legacy Notes - Note Type: POG REPLCS 3176647-3 AS A MANDATORY CHANGE. 3399100-11    V17138 (TAKES -4 TO -11) 3399100-11    V17139 (TAKES -9 TO -11) 3399100-10    V17140 (TAK
1734808     000100     0002     Production Baseline     ZTAN          100A     0039     3883240-6     80     300168     IBERIA LAE     48017888601     CONTROL FUEL     HIS     M13     12/20/2008     01/10/2009              1.000
              1.000            1.000     04/29/2009     AVS Legacy No
Can any one help me out?

Hi Stefan,
I am Using Transport Protocol as IMAP4
                 Message Protocol as XIPayload
Connection Parameters to Mail Server
URL -
.mycompany.com
Mail Attributes
Use Mail Package
content Encoding   base64
Keep attachments
I have Used the following Modules
Processing Sequence
Module Name                                                                Module Type                             Module Key
localejbs/AF_Modules/PayloadSwapBean                        Local Enterprise Bean                Payload
localejbs/AF_Modules/MessageTransformBean                Local Enterprise Bean                Transform
sap.com/com.sap.aii.adapter.mail.app/XIMailAdapterBean Local Enterprise Bean                mail
Module Configuration
Module                              Parametername                           Parameter Value
Payload                             swap.KeyName                           content-type
Payload                             swap.KeyValue                            text/xml
Transform                          Transform.ContentDescription       MyReport.txt
Transform                           Transform.ContentDisposition       attachment
Transform                           Transform.Contenttype                 text/xml

How to Create a Flat File using FTP/File Adapter

Can any body done workaround on creating the Flat file using FTP/File Adapter?.
I need to create a simple FlatFile either using of delimiter/Fixed length. using the above said adapters we can create XML file, i tried concatinating all the values into a single String and writing into a file, but it does not have proper structure
Can any body help me out on this..
Thanks
Ram

You can create a text schema while creating a File Adapter. If schema is specified for File Adapter, it takes care of converting XML into fixed length or delimited format.
Thanks,
-Ng.

Tab Delimited File Using Receiver FCC

Hi Experts,
I need to generate a Tab Delimited File Using Receiver FCC. I have achieved the same by copying the tab length from a notepad and used the same in name.fieldSeparator parameter.
The other below mentioned values for name.fieldSeparator didnu2019t produce the expected result:
name.fieldSeparator=u2019htu2019
name.fieldSeparator=u2019\tu2019
name.fieldSeparator=u2019 0x09u2019
So just need to know if my approach for achieving this is fine or not.
Thanking you in advance.
Aditya.

Verma,
name.fieldSeparator=u2019 0x09u2019
I see a space after the first comma. Try removing it and give a try.
'0x09' with no spaces.
Regards,
---Satish

Reading a multiple record types from a single File using BPEL file adapter

Hi all.
We have a requirement where we want to read a CSV file using the BPEl adapter.
Following is the sample of csv file
HDR,1,2,3
---- First transaction starts----
TH,1,2,3
RSD,1,1
RSD,1,1
TD,1
-------Second transaction starts---
TH,1,2,3
RSD,1,1
RSD,1,1
RSD,1,1
RSD,1,2
TD,1
TD,1
-------------Third Transaction starts---
TH,1,2,3
RSD,1,1
TD,1
TD,1
TD,1
TD,1
-------------Fourth Transaction starts---
TH,1,2,3
LN,1,1,1,1,2
-----End of File---
TAIL
I have modified the file with some comments to have some clear understanding.
Basically our file is a transactions file from legacy system & contains mutliple transactions
First line will be a Header record starting "HDR" & contains all summary details about the file.
After it is details of all transactions thorughout the day, each transaction begins with record starting "TH".As shown in all transactions above.EAch transaction can have other multiple records like the RSD & TD shown above.
Our need is to read each transaction from the file & create an instance.How can we configure BPEL to grab the data starting with TH till it encounter's another TH.
Please advise
Krunal

You can't use the wizard to create a schema if a file as complex as this. the good news is that you can create one yourself. What you need to do is create standard xsd that will handle your file, then what you do is add the terminators that determine when a field stops.
Here is an example, hopefully this provides you enough infor for you to make your own.
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
targetNamespace="http://Invoice"
xmlns:tns="http://Invoice"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:encoding="ASCII"
nxsd:stream="chars"
nxsd:version="NXSD">
<xsd:element name="Invoice">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="InvoiceHeader" nxsd:startsWith="000" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element ref="tns:InvoiceHeaderDetails" />
<xsd:element ref="tns:LineItem" nxsd:startsWith="001" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="InvoiceHeaderDetails">
<xsd:complexType>
<xsd:sequence nxsd:style="array" nxsd:arrayTerminatedBy="${eol}">
<xsd:element name="BusinessUnit" type="xsd:string" nxsd:style="fixedLength" nxsd:length="13" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
<xsd:element name="InvoiceNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="16" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="InvoiceDate" type="xsd:string" nxsd:style="fixedLength" nxsd:length="15" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="VendorNo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="29" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="OriginCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="3" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="OperatorID" type="xsd:string" nxsd:style="fixedLength" nxsd:length="8" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="LineCount" type="xsd:integer" nxsd:style="fixedLength" nxsd:length="34" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="GrossAmount" type="xsd:decimal" nxsd:style="fixedLength" nxsd:length="17" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="DiscountAmount" type="xsd:decimal" nxsd:style="fixedLength" nxsd:length="50" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="FreightAmount" type="xsd:decimal" nxsd:style="fixedLength" nxsd:length="93" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="TaxAmount" type="xsd:decimal" nxsd:style="fixedLength" nxsd:length="50" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="DiscountFlag" type="xsd:string" nxsd:style="fixedLength" nxsd:length="1" nxsd:paddedBy=" " nxsd:padStyle="tail" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="LineItem">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="LineItemDetails">
<xsd:complexType>
<xsd:sequence nxsd:style="array" nxsd:arrayTerminatedBy="${eol}">
<xsd:element name="BusinessUnit" type="xsd:string" nxsd:style="fixedLength" nxsd:length="13" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
<xsd:element name="InvoiceLineNo" type="xsd:integer" nxsd:style="fixedLength" nxsd:length="5" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="DistributionCount" type="xsd:integer" nxsd:style="fixedLength" nxsd:length="5" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="BusinessUnitPO" type="xsd:string" nxsd:style="fixedLength" nxsd:length="5" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
<xsd:element name="PONo" type="xsd:string" nxsd:style="fixedLength" nxsd:length="10" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
<xsd:element name="POLineNo" type="xsd:integer" nxsd:style="fixedLength" nxsd:length="38" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
<xsd:element name="InvoiceLineAmount" type="xsd:decimal" nxsd:style="fixedLength" nxsd:length="17" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element ref="tns:Distribution" nxsd:startsWith="002" maxOccurs="unbounded"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
<xsd:element name="Distribution">
<xsd:complexType>
<xsd:sequence nxsd:style="array" nxsd:arrayTerminatedBy="${eol}">
<xsd:element name="BusinessUnit" type="xsd:string" nxsd:style="fixedLength" nxsd:length="13" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
<xsd:element name="InvoiceLineNo" type="xsd:integer" nxsd:style="fixedLength" nxsd:length="5" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="DistributionLineNo" type="xsd:integer" nxsd:style="fixedLength" nxsd:length="10" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="GLAccountCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="84" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
<xsd:element name="DistributionAmount" type="xsd:decimal" nxsd:style="fixedLength" nxsd:length="162" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="DistributionTaxAmount" type="xsd:decimal" nxsd:style="fixedLength" nxsd:length="62" nxsd:paddedBy=" " nxsd:padStyle="tail" />
<xsd:element name="GLDepartmentCode" type="xsd:string" nxsd:style="fixedLength" nxsd:length="10" nxsd:paddedBy=" " nxsd:padStyle="tail"/>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
cheers
James

ADF mobile: how do I upload a file using the rest adapter api

Hello,
I want to upload files using the rest adapter. How would I upload files such as pdfs, images (png, jpg ..) etc.. Some code would be appreciated.
Thanks,

Thanks Frank,
The back-end is functioning in the following way (using Jersey and handling input streams):
    @POST
    @Path("/uploadFile")
    @Consumes(MediaType.MULTIPART_FORM_DATA)
    public Response uploadFile(@FormDataParam("file") InputStream uploadedInputStream, @FormDataParam("file") FormDataContentDisposition fileDetail) {
        String uploadedFileLocation = "D:\\temp\\uploadsTest\\" + fileDetail.getFileName();
        // save it (this function reads from the input stream)
        writeToFile(uploadedInputStream, uploadedFileLocation);
        String output = "File uploaded to : " + uploadedFileLocation;
        return Response.status(200).entity(output).build();
     Is there a way to send data over a stream?
     Thanks,

Sending plain request to web service using receiver sender adapter and PI and expecting as attachment as response

Hi
In my scenario,we are sending plain request to web service using receiver sender adapter and PI will receive response as excel attachment. What are standard module required to achieve this and sequence? or checking Keep attachment box will help us to achieve this?
is it possible to receive excel sheet as attachment from receiver soap adapter ?
Thanks in Advance

Hi,
This issue might be due to the invalid .pem certificate file.
Make sure to include the beginning and end tags on each certificate.
The result should look like this:
-----BEGIN CERTIFICATE-----
(Your Primary SSL certificate: your_domain_name.crt)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Your Intermediate certificate: DigiCertCA.crt)
-----END CERTIFICATE-----
For more detailed information, you could refer to:
https://www.digicert.com/ssl-support/pem-ssl-creation.htm
Regards

How to send the payload to a jsp using receiver Http adapter?

Hi experts,
I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
service number : port no ,
path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
Is there any way to check the URL that it forms after appending the querystring in the url ...?
So please provide help on this or suggest a solution to [email protected] as soon as possible.....
Thanx in advance.
Akshata

hey Shekhar,
thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
http://xx.xx.xx.xx:8080/abcdef/trial/ And it gives a proper response message after clicking on the submit button.
now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
addressing type: url
target host : xx.xx.xx.xx
service no:8080
path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
content type: text/xml; charset=iso-8859-1
xml code: UTF-8
Mask special characters (URL escaping) checked.
now since the name of the inputfield is "test" in the prolog I gave test=
But it doesnt work I get this error "http request parameter [test] is null" in the response message which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
Thanx ,
Akshata

Cc header in the triggered mail using receiver mail adapter

Hi,
How can we have cc option in the triggered mail using receiver mail adapter.
message protocol is XI payload with mail package.
thanks,
Ramya Shenoy

Hi !
Check this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
under the title:
"Mail Attributes for Message Protocol XIPAYLOAD"
Regards,
Matias
ps:please award points if helpful.

Multiple table insert using receiver jdbc adapter

Hi,
I am trying to insert data in to two tables in a single structure using receiver jdbc adapter. I am not using any stored procedure to insert data instead directly inserting the data using PI. Please see the structure I am using.
SOURCE side:
DT_ABC_SENDER
--IT_HEADER_TEXT
-- EBELN
-- LINENO
--TDTEXT
--IT_ITEM_TEXT
-- EBELN
-- LINENO
--TDLINE
TARGET side:
DT_ABC_RECEIVER
--InsertStatement
     --HEADER_TEXT
            -- action                         (insert)
            -- Table                          (Table 1)
            --access
                 -- IDS_ENQ_NO
                 -- IDS_DESC
                 -- IDS_TEXT
   --ITEM_TEXT
            -- action                         (insert)
            -- Table                          (Table 2)
            --access
                 -- IIS_ENQ_NO
                 -- IIS_DESC
                 -- IIS_TEXT
Using the above structure I am able to successfully insert the data in Table 1 but data is not getting inserted in Table 2.
In sxmb_moni it is saying message successfully delivered but I but there is data insertion took place in Table 2.
Please help me urgently.
Thanks in advance.
Neeeraj

Hi Neeraj,
Add --InsertStatement statement for the second table structure in the same level of first InsertStatement.
Target structure like this:
DT_ABC_RECEIVER
--InsertStatement
     --HEADER_TEXT
            -- action                         (insert)
            -- Table                          (Table 1)
            --access
                 -- IDS_ENQ_NO
                 -- IDS_DESC
                 -- IDS_TEXT
--InsertStatement
   --ITEM_TEXT
            -- action                         (insert)
            -- Table                          (Table 2)
            --access
                 -- IIS_ENQ_NO
                 -- IIS_DESC
                 -- IIS_TEXT

How to send mails to "CC" and "BCC" using receiver mail adapter dynamically

Hi,
Due to business requirement PI need to send mails dynamically to u201CCCu201D and u201CBCCu201D using receiver mail adapter.
We have an option to send mails to u201CTou201D dynamically, but are there any option to send mails u201CCCu201D and u201CBCCu201D dynamically.
Please some help to resolve the issue. Thanks
Regards,
Sreeramulu Konjeti.

Hi Sreeramulu,
As mentioned by Lucas, you can use the UDF. Inn addition to that, you need to define the Variable Headers under Variable transport binding after enabling the Adapter Specific Message Attributes.
For the Enabling ASMA, follow the below steps and check for the variable attributes.
Select the Advanced tab page.
   To save adapter-specific attributes in the message header of the XI message, select Use Adapter-Specific Message Attributes and Variable Transport Binding.
The following attributes in the message header are then available for processing:
○       User: (technical name: TServerLocation)
○       Authentication key: (technical name: TAuthKey)
The following mail header fields are available for processing:
○       From: (technical name: THeaderFROM)
○       To: (technical name: THeaderTO)
○       Cc: (technical name: THeaderCC)
○       Bcc: (technical name: THeaderBCC)
○       Subject: (technical name: THeaderSUBJECT)
○       Reference to the mail that is to be replied to: (technical name: THeaderIN-REPLY-TO)
○       Reply to: (technical name: THeaderREPLY-TO)
○       Mail client program: (technical name: THeaderX-MAILER)
○       Send confirmation of receipt: (technical name: THeaderDISPOSITION-NOTIFICATION-TO)
○       Priority: (technical name: THeaderPRIORITY)
○       Importance of message: (technical name: THeaderIMPORTANCE)
   To transfer further header fields, set the relevant indicator for Variable Header. The technical names for the fields are XHeaderName1, XHeaderName2, and XHeaderName3.
The parameters are included in the mail header under the names specified here.
The attribute namespace for the adapter is http://sap.com/xi/XI/System/Mail.
Thanks,

Using Receiver HTTP Adapter ?

Hi,
Is it possible to call the Mail service using receiver HTTP Adapter?
Appreciate your help...
Thanks,
kumar.

Hi,
If we are using the multi mapping, Is it possible to call Mail service using SOAP receiver adapter & IDOC has sent parallely..
Correct me if i'm wrong...
Thanks,
vasanth.

0 byte txt file using receiver File Adapter

Similar Messages

Maybe you are looking for