Using Receiver HTTP Adapter ?

Hi,
Is it possible to call the Mail service using receiver HTTP Adapter?
Appreciate your help...
Thanks,
kumar.

Hi,
If we are using the multi mapping, Is it possible to call Mail service using SOAP receiver adapter & IDOC has sent parallely..
Correct me if i'm wrong...
Thanks,
vasanth.

Similar Messages

How to send the payload to a jsp using receiver Http adapter?

Hi experts,
I have this scenario from Legacy to XI to external app server.I have a test jsp to execute that functionality .Its a jsp which has 1 textarea named "test" and when I click on the submit buton I get a response back.This way I am able to test this independently.Now from XI when I am executing my scenario I am getting status code '1250' and message as ' http request(test) is null'.Now in the scenario in http adapter I just provide the target host : ip of server ,
service number : port no ,
path: the container or the request handler. But this scenario fails and gives me the above erroneous response.Now Basically I am not able to get how to send the value to the textarea "test"? please provide help as soon as possible.Do we have to put the name of the jsp in the "path" in http adapter and use prolog as test=.I tried this but it doesnt work.
Is there any way to check the URL that it forms after appending the querystring in the url ...?
So please provide help on this or suggest a solution to [email protected] as soon as possible.....
Thanx in advance.
Akshata

hey Shekhar,
thanx for that prompt reply but I have configured the communication channel in the same manner as suggested by u.
actually I have this jsp page http://xx.xx.xx.xx:8080/abcdef/try/efg.jsp where there is a textarea "test" which has to be filled and there is a submit button.When I test this http client i.e the above jsp page independently then it goes to handler
http://xx.xx.xx.xx:8080/abcdef/trial/ And it gives a proper response message after clicking on the submit button.
now I want to carry out the same using receiver http adapter. I need to pass the value for this inputfield names "test" on that jsp . so right now I have configyured the adapter as
addressing type: url
target host : xx.xx.xx.xx
service no:8080
path : here I have given the path of handler i.e /abcdef/trial I tried giving the jsp page also but logically I guess it should be the handler.
content type: text/xml; charset=iso-8859-1
xml code: UTF-8
Mask special characters (URL escaping) checked.
now since the name of the inputfield is "test" in the prolog I gave test=
But it doesnt work I get this error "http request parameter [test] is null" in the response message which I guess suggests that it is not able to send the value for the field"test" to that handler.Please suggest how to send this and tell me if there are any other configurations that I have to do in the receiver communication channel.
Thanx ,
Akshata

Convert XML payload to HTML form data in Receiver HTTP Adapter

Hi,
I want to make a HTTP request ( Receiver HTTP Adapter ) to a servlet where I need to send the payload in HTML form format ( name=value ). As per the help document:
A typical HTML form comprises named fields. When transferring a completed form to the server or a CGI program, the data must be transferred in such a way that the CGI script can recognize the fields that make up the form, and which data was entered in which field.
The plain HTTP adapter constructs this format using a prolog and an epilog
Has anyone done this before? I looked through all help documents and forums but in vain. I can resort to Java Mapping to do this but I do not want to re-invent the wheel if I can do it easily using HTTP Adapter Configuration. Please help.

The parameters available in HTTP adapter for message header are:
HeaderFieldFive     http://sap.com/xi/XI/System/HTTP
HeaderFieldFour     http://sap.com/xi/XI/System/HTTP
HeaderFieldOne     http://sap.com/xi/XI/System/HTTP
HeaderFieldSix     http://sap.com/xi/XI/System/HTTP
HeaderFieldThree     http://sap.com/xi/XI/System/HTTP
HeaderFieldTwo     http://sap.com/xi/XI/System/HTTP
HTTPDest     http://sap.com/xi/XI/System/HTTP
TargetURL     http://sap.com/xi/XI/System/HTTP
URLParamFive     http://sap.com/xi/XI/System/HTTP
URLParamFour     http://sap.com/xi/XI/System/HTTP
URLParamOne     http://sap.com/xi/XI/System/HTTP
URLParamSix     http://sap.com/xi/XI/System/HTTP
URLParamThree     http://sap.com/xi/XI/System/HTTP
URLParamTwo     http://sap.com/xi/XI/System/HTTP

Cc header in the triggered mail using receiver mail adapter

Hi,
How can we have cc option in the triggered mail using receiver mail adapter.
message protocol is XI payload with mail package.
thanks,
Ramya Shenoy

Hi !
Check this link:
http://help.sap.com/saphelp_nw04s/helpdata/en/6b/4493404f673028e10000000a1550b0/frameset.htm
under the title:
"Mail Attributes for Message Protocol XIPAYLOAD"
Regards,
Matias
ps:please award points if helpful.

How to send mails to "CC" and "BCC" using receiver mail adapter dynamically

Hi,
Due to business requirement PI need to send mails dynamically to u201CCCu201D and u201CBCCu201D using receiver mail adapter.
We have an option to send mails to u201CTou201D dynamically, but are there any option to send mails u201CCCu201D and u201CBCCu201D dynamically.
Please some help to resolve the issue. Thanks
Regards,
Sreeramulu Konjeti.

Hi Sreeramulu,
As mentioned by Lucas, you can use the UDF. Inn addition to that, you need to define the Variable Headers under Variable transport binding after enabling the Adapter Specific Message Attributes.
For the Enabling ASMA, follow the below steps and check for the variable attributes.
Select the Advanced tab page.
   To save adapter-specific attributes in the message header of the XI message, select Use Adapter-Specific Message Attributes and Variable Transport Binding.
The following attributes in the message header are then available for processing:
○       User: (technical name: TServerLocation)
○       Authentication key: (technical name: TAuthKey)
The following mail header fields are available for processing:
○       From: (technical name: THeaderFROM)
○       To: (technical name: THeaderTO)
○       Cc: (technical name: THeaderCC)
○       Bcc: (technical name: THeaderBCC)
○       Subject: (technical name: THeaderSUBJECT)
○       Reference to the mail that is to be replied to: (technical name: THeaderIN-REPLY-TO)
○       Reply to: (technical name: THeaderREPLY-TO)
○       Mail client program: (technical name: THeaderX-MAILER)
○       Send confirmation of receipt: (technical name: THeaderDISPOSITION-NOTIFICATION-TO)
○       Priority: (technical name: THeaderPRIORITY)
○       Importance of message: (technical name: THeaderIMPORTANCE)
   To transfer further header fields, set the relevant indicator for Variable Header. The technical names for the fields are XHeaderName1, XHeaderName2, and XHeaderName3.
The parameters are included in the mail header under the names specified here.
The attribute namespace for the adapter is http://sap.com/xi/XI/System/Mail.
Thanks,

Sending plain request to web service using receiver sender adapter and PI and expecting as attachment as response

Hi
In my scenario,we are sending plain request to web service using receiver sender adapter and PI will receive response as excel attachment. What are standard module required to achieve this and sequence? or checking Keep attachment box will help us to achieve this?
is it possible to receive excel sheet as attachment from receiver soap adapter ?
Thanks in Advance

Hi,
This issue might be due to the invalid .pem certificate file.
Make sure to include the beginning and end tags on each certificate.
The result should look like this:
-----BEGIN CERTIFICATE-----
(Your Primary SSL certificate: your_domain_name.crt)
-----END CERTIFICATE-----
-----BEGIN CERTIFICATE-----
(Your Intermediate certificate: DigiCertCA.crt)
-----END CERTIFICATE-----
For more detailed information, you could refer to:
https://www.digicert.com/ssl-support/pem-ssl-creation.htm
Regards

HTTPS on Receiver Http Adapter

Hi ,
In the http receiver adapter , if i'm using 'https' communication where do i specify that . Is it in the RFC destination of type 'G' . I also read in some places that i would have to do that in the Receiver Agreement . But i think the security options in the Receiver Agreement are meant for adapters - XI, SOAP, Mail, or CIDX and i couldn't find anything for http.
Is there any need to specifiy it in the adapter . And in the RFC destination we would be giving the host name , port and the path prefix string . Do i have to activate the SSL option there, is that all thats needed to make sure that the receiver http adapter sends the message out via http.
PS. I've already enabled the SSL on my server in the abap stack .
Thanks & Regards,
Rahul

Hi Rahul,
Yes, you need to make the SSL option in the G type connection active, if authentication is via certific you can select there itself.
Thanks,
Srini

Use of HTTP adapter

Hi Folks,
Can anyone give me the use of HTTP adapter, and in what case we go for HTTP adapter with an example.
Their is SOAP adapter which can communicate with the webservices then what is the use of HTTP adapter.
Thanks,
Srinivas Reddy.

Hi Reddy,
Simply if the security is not concern then use the HTTP adapter otherwise use the SOAP adapter. In the SOAP adapter security is available.
The plain HTTP adapter gives application systems the option of communicating with the Integration Engine and exchanging business data using a plain HTTP connection. Depending on the receiver system, outbound messages can be enhanced with certain information.
The SOAP adapter enables you to exchange SOAP messages between remote clients or Web service servers and the Integration Server or the PCK.
In the SOAP adapter, you can specify security settings to be used to sign/verify the SOAP body. In addition, you can specify the standard to be used for signing/verifying the SOAP message.
whenever Xi need to communicate with any sort of webservice i.e remote applications it uses SOAP adapter.. And XI uses HTTP adapter when you want to post a HTTP request message from a web application to XI.
Regards
Ramesh

How to config receiver http adapter for HTTP POST without XML tags ??

Hi All,
Can you please provide some infornation on How to config receiver http adapter for HTTP POST (Request) without XML tags ?? Our receiving product doesn't support XML formats.
Is there any option to bypass server authentication on the XI?
If anybody has the same experience or know how to please provide inputs.
Thanx
Navin

Hi,
you can use xsl mapping for this in which u xtract
the contents only but not the xml tag.
Ranjit

Multiple table insert using receiver jdbc adapter

Hi,
I am trying to insert data in to two tables in a single structure using receiver jdbc adapter. I am not using any stored procedure to insert data instead directly inserting the data using PI. Please see the structure I am using.
SOURCE side:
DT_ABC_SENDER
--IT_HEADER_TEXT
-- EBELN
-- LINENO
--TDTEXT
--IT_ITEM_TEXT
-- EBELN
-- LINENO
--TDLINE
TARGET side:
DT_ABC_RECEIVER
--InsertStatement
     --HEADER_TEXT
            -- action                         (insert)
            -- Table                          (Table 1)
            --access
                 -- IDS_ENQ_NO
                 -- IDS_DESC
                 -- IDS_TEXT
   --ITEM_TEXT
            -- action                         (insert)
            -- Table                          (Table 2)
            --access
                 -- IIS_ENQ_NO
                 -- IIS_DESC
                 -- IIS_TEXT
Using the above structure I am able to successfully insert the data in Table 1 but data is not getting inserted in Table 2.
In sxmb_moni it is saying message successfully delivered but I but there is data insertion took place in Table 2.
Please help me urgently.
Thanks in advance.
Neeeraj

Hi Neeraj,
Add --InsertStatement statement for the second table structure in the same level of first InsertStatement.
Target structure like this:
DT_ABC_RECEIVER
--InsertStatement
     --HEADER_TEXT
            -- action                         (insert)
            -- Table                          (Table 1)
            --access
                 -- IDS_ENQ_NO
                 -- IDS_DESC
                 -- IDS_TEXT
--InsertStatement
   --ITEM_TEXT
            -- action                         (insert)
            -- Table                          (Table 2)
            --access
                 -- IIS_ENQ_NO
                 -- IIS_DESC
                 -- IIS_TEXT

Send multiple files in different directories using Receiver File Adapter

Hi Experts,
I have one File to File without ESR scenario where I have to pick multiple files from different directories and to save them in different directories on receiver side.
Can anyne help me to send multiple files in different directories using receiver file adapter.
Is it possible??
Any help will be appreciated.
Regards,
Danish

hi ,
that is possiable without esr,
we need to create one sender communication channel , in that we nend to use "adavnced selection for source file " for sending multiple files from multiple directories.
we need to create 'n' receiver communication channels and 'n' receiver agreements based on communication channels .
in receiver determination, provide multiple receivers
In interface determination , provide * symbol for receiver communication components
thanks,

Save file in multiple directories using receiver file adapter?

Hi,
Is it posible to save file in multiple directories using receiver file adapter?
Regards,
Ashish

Well, there is a round about way to do that -
The idea is to use multi mapping. 1:n mapping
1) Map ur message to 2 different record set nodes. Since you want to use the same file both the mapping will look exactly the same. make sure that the filepath and filename are a part of the output payload message
2) In the file adapter config. make sure the the file name and file path are from these payload fields. You can use a context object to refer these fields. Voila...the files are created in the 2 direcoties you mentioned.
of course the simplest way is to route the same message to 2 business systems/services and write them out using 2 ccs.,
Arvind R

How to configure message header in receiver http adapter?

Hi all
I need the outgoing message payload from receiver http adapter to backend system with below form.
POST http://222.222.33.22 /HTTP1.0
content-type:application/x-www-form-urlencoded
USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
×POST http://222.222.33.22 /HTTP1.0
○content-type:application/x-www-form-urlencoded
○USERID=xxxxxx&PASSWORD=xxxx&SRCID=10&CDDATE=20070601...........................................................................
Is there a parameter to enable POST method as a part of message header outputing?
thanks in advance.

The parameters available in HTTP adapter for message header are:
HeaderFieldFive     http://sap.com/xi/XI/System/HTTP
HeaderFieldFour     http://sap.com/xi/XI/System/HTTP
HeaderFieldOne     http://sap.com/xi/XI/System/HTTP
HeaderFieldSix     http://sap.com/xi/XI/System/HTTP
HeaderFieldThree     http://sap.com/xi/XI/System/HTTP
HeaderFieldTwo     http://sap.com/xi/XI/System/HTTP
HTTPDest     http://sap.com/xi/XI/System/HTTP
TargetURL     http://sap.com/xi/XI/System/HTTP
URLParamFive     http://sap.com/xi/XI/System/HTTP
URLParamFour     http://sap.com/xi/XI/System/HTTP
URLParamOne     http://sap.com/xi/XI/System/HTTP
URLParamSix     http://sap.com/xi/XI/System/HTTP
URLParamThree     http://sap.com/xi/XI/System/HTTP
URLParamTwo     http://sap.com/xi/XI/System/HTTP

Using plain http adapter using (SIN)---Most urgent please help me

Hi Experts,
all we need to do is call the pipeline directly using plain http adapter using (SIN) and get the output from the pipeline to the local file folders. This can help developers to verify the interfaces that have been migrated to XI , to compare the out put results generated in XI with the original output captured using existing middle ware solutions.
Could anyone help me out this Urgent

Hi Experts,
all we need to do is call the pipeline directly using plain http adapter using (SIN) and get the output from the pipeline to the local file folders. This can help developers to verify the interfaces that have been migrated to XI , to compare the out put results generated in XI with the original output captured using existing middle ware solutions.
Could anyone help me out this Urgent

HTTPS in Receiver HTTP adapter

Hi ALL,
I have a HTTP receiver scenarion..i.e The interface is XML over HTTPS..
Can we do HTTPS in receiver HTTP adapter ..how to do the SSL for this in Receiver HTTP channel because when i check the receiver HTTP adapter ..i don't find any setting for HTTPS on tht ..
Thanks
Souz

prateek ,
thanks for the reply ...
You mean to say ..i have to select addressing type "HTTP Destination" and in the HTTP destination input files mention the RFC destination of type G..?
Provide the SSL details there u2026 where can I provide this.. ?
thanks
Souz

Using Receiver HTTP Adapter ?

Similar Messages

Maybe you are looking for