"00004.MTS" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media. is message I'm getting i have a sony nex-vg10 my buddy use my cam came over log an transfer with no pro
"00004.MTS" contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media.
when i try log transfer from a sony nex-vg10 but my buddy can do it with no problem on my cam an mac
If you copy the recordings from AVCHD cameras, you must copy the entire storage device with its directory structure intact.
I have even tried copying BACK files onto the camera and they do not show up in the transfer window under the last clip.
There is no information for those clips in the AVCHD storage device's directory index files. That means there is no way for the computer to find them.
Your last resort is most likely [ClipWrap|http://www.divergentmedia.com/clipwrap] now, unless you can get the storage device exactly back into the state it is supposed to be according to the index file.
Similar Messages
-
Log and transfer with Canon cameras
Hello. Using Final Cut Pro 7 to edit my project.
I've been importing footage successfully from my Canon 7D using the Log and Transfer plugin.
I tried to do the same with new footage from my Canon Powershot S100. I receievd this error:
"contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
I transferred the files from camera --> external hard drive keeping the original file structure. is there another way I should be importing footage from a non-EOS camera?
Thanks!I'm not aware of any plugin that Canon has for the S100 but you may want to check on that. If they don't, it would be best to convert the footage to ProRes 422 prior to importing into an FCP project.
-DH -
When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.
I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured. -
Help! "Contains unsupported media or has an invalid directory structure"
I have FCP 7 and I'm trying to Log and Transfer HD video recorded on a Canon 5D. I keep getting "contains unsupported media or has an invalid directory structure."
Any idea's?Okay... I'm still getting the same message.
This is what I'm seeing... -
Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini
There is no license required for iWeb. Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT -
I have 3 iTunes courses that i downloaded using my iPad. After syncing my iPad with iTunes on my mac, these 3 courses do not appear on my mac iTunes library yet they are still on my iPad.
I have 2 other courses that I downloaded frim my iPad and these appeared on my iTunes (mac) library.
Any idea why the other 3 that i downloaded were not synced in iTunes?You and the iPad can function with the Remote App from across the room, or in another room.
However, your stereo system has to have a way to communicate or connect with the computer. Unless it has some kind of wifi connector or has Bluetooth, I don't see how you can do this.
There is no app or software to resolve this. You need a way for the stereo to connect. -
Windows 7 64 itunes 10.5.2 64 - I receive the following error message when opening iTunes - please sign in again itunes match has encountered an error. Please choose sign out and then sign in from the itunes store menu and try again.
When I try to sign out iTunes freezes and I need to shut down windows entirely to get it to open again.
Has anybody been able to resolve this issue?After many annoying sign-in-out-iTunes-match-activation problems I found an easy solution for me. When the iTunes Cloud symbol is broken (and I should sign in again) I just deactivate my notebooks (Windows 7) Wifi (with Fn+F5 for my Thinkpad).Then I call up the Itunes store and iTunes tells my that there is no connection to the internet (most probaply this step is not necessesary). After manual re-activation of my Wifi iTunes seems to re-establish the connection and the Cloud symbol signalizes that iTunes match does work, again.
Hope, this helps. -
I have just subscribed to iTunes Match, and get the above error message. I have signed out and signed in several times, and still get the same message. Can anyone help with a solution?
I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured. -
I just purchased itunes match and when I try to add my main computers music library I see "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again." but signing back in always results in the same error message. Somebody has to have an answer to this.
Did you try setting itunes to run with administrator privileges?
Since I changed that I no longer have this issue -
Every few hours I receive this error message:
"iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
Is there someone who knows how this could be solved?
[Update]
I see that there is already a discussion on this issue: https://discussions.apple.com/thread/3502994?start=0&tstart=0
Message was edited by: mickniepothI have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured. -
this happens every week!!!
iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the iTunes Store menu and try again.I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
As it takes a good ten minuites for itunes
If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured. -
I bought a new Panasonic camcorder to edit in iMovie 10.0.3. I need to choose between the AVCHD choices and the ALL MP4/iframe choices. I don't have a clue as to which to use. I just want to burn video to DVD to have and share. Thanks for any help.
It sounds like you have assigned the primary click on the trackpad to something else, perhaps a gesture.
Use your mouse, login and then open the Trackpad preference pane and see how you have the interface configured.
Oh and you can have both the Magic Mouse and Magic Trackpad powered up and working at the same time. No need to keep moving batteries around.
Tom -
Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade
Is anyone having issues with Log and Transfer with Canon XF300's after 1.0.2 Firmware upgrade?
Yes, just experienced it yesterday at a shoot after upgrading to 1.0.2 two days ago. Have you found a solutions yet?
-
AVCHD cam connected. Log and Transfer open, nothing happening.`
Sorry but this is my first adventure into HD and AVCHD. I read the manual and searched the threads. Camera's connected to the USB, got my scratch disk set, got the audio set to plain stereo. Everything's just sitting here doing nothing.
What did happen was the iPhoto window opened but each scene did show a movie camera. I just closed it and opened the log and transfer window.
What else do I need to do?
AllenHi Tom
Thanks! I'm sorry but I'm still learning everything here. You've helped me tremendously with FCE and I appreciate it but now with this HD stuff I'm totally lost again. According to the FCE manual it said after mounting the camera/card reader, open the L&T and my clips will show up in What's it called, a browser? the top box. So I worried when they didn't show up.
I found the button at the tiop left that said import clips. But when I navagitated to the directory, the 3 files were greyed out. However looking at the files in the finder, they're highlighted.
I deleted those first clips from the camera. We're going into Chicago today. So I reset the camera for 720p/30 and I'll see if that works better.
Is it better to shoot 720p/30 or 60?
You said don't use StreamClip! Why? I used it and got the 3 clips converted with the Apple Intermediate Codec, and on the timeline. Put in a couple of disolves. Seemed to work fine! And they played great.
Allen -
Why won't Express find my camera in the Log and Transfer window??
I plug my Sony DCR45 Hard Disk Drive camera in. I switch it to USB connect mode, and then I enter the Log and Transfer window. I wait a good 15 to 20 minutes each time and it just won't locate my camera! How can I fix this?
Well, your camcorder is not AVCHD, HDV or DV, so Final Cut Express is not going to 'see' your camcorder.
Sony's specs on this camcorder leave something to be desired, but it does say the camera records MPEG2-PS. If this is the case, you will need to convert the video to DV or Apple Intermediate Codec before importing it into FCE.
For most purposes, MPEG Streamclip can do the conversion however with MPEG2 material it needs the Apple QuickTime MPEG2 Playback Component ($20) which you can buy & download from the Apple Store.
Maybe you are looking for
-
Hi there Im using FCC to create a flat file, I have to specify the field lengths and If I miss something it takes forever to get the faulty value. If I have an error like this, is there a way to pin point the line that has the problem? Message proces
-
Mapping of REGUP and REGUH fields to the structure FPAYP,FPAYH, FPAYHX
Hi We use structure FPAYP, FPAYH, FPAYHX in the DMEE formats. Now the data in the payment run can be seen in table REGUP and REGUH. All the payment related data falls into the DMEE generated xml file thru the structure FPAYP,F
-
How to display data sent from a midlet to a servlet over an outputstream in
a browser?? Hello Currently I send data to a servlet from a midlet and the servlet recieves and processes the data (confirmed through breakpoints) but I want to display the data in a JSP or directly thru the servlet using html tags. However I can for
-
Marketplace adapter Multiple DDID Issue
We have two customers whom we have to send messages to. Both of them use marketplace adapters and they would want our R/3 system to send the messages with 2 different DDIDs. Is this possible? I checked the option of using party to differentiate our R
-
Slow Broadband Connection - Likely IP Profile Issu...
Hello, For an age I've had a rubbish broadband connection, but the hassle of call centres and engineer visits have put me off sorting it out. In August I got frustrated enough to try to get it resolved - I have a couple of work/study things that ne