0CUSTOMER data from Unicode R/3 to Non-Unocode BW Error
Hi,
I am getting error data when extracting 0CUSTOMER_ATTR.
the error is similar to SDN Link: [Extraction from a unicode ERP to a non unicode BW|Extraction from a unicode ERP to a non unicode BW]
We don't have any Languages installed at present.
we are getting this error for Chinese char. In the above link there is a mention to do Initialization of SPRAS in INCLUDE ZXRSAU02. Can anyone explain this.
in the Table T002: SPRAS=ZH is set to Chinese; if we initialize to ZH how about other languages.
Please Suggest.
Thanks,
Joseph M
Did anyone face similar issue...
Similar Messages
-
Extraction of Unicode data from Unicode R/3 to NON Unicode BW
Hello experts!
We want to extract data from a unicode source system into a non-unicode BW. Now we got problems with japanese signs (kanji). Our plan was to check against RSKC and delete the the unicode texts this way. This is OK for our people as a workaround.
But we even doesn't get our data in the PSA. Getting here some conversion errors.
Is there a way to handle this. The only solution we now at the moment is to delete possible problematic values over extractor customer exit. But if there would be a BW-side solution it would be better.
Switching the BW to Unicode is no topic at the moment.
Best regards,
PeterHello Siggi!
Thank you for this hint. I had seen this document before but being not sure how this can help. I will look on this tomorrow again and talk to our sap basis.
My perfomance issue is still open. I tried different things but nothing shows a real change for the better. So I opened now a sap message. Let's see what it will bring.
Oh, we produce no monitor entries by the way.
What is a little bit crazy is that in SM50 it is always read on DIM6 while we have a DIM7 which has about 40 percent compared to the now 15 percent of DIM6. Very bad design but also depends on the kind of data in this case.
Best regards,
Peter -
When target DB is down in which table is the data from source is stored, also where are the error messages stored in ODI( I am not getting any error message in E$_TARGET_ANI_TEST).
When i am running the interface i am getting the below error against the errored step
"ORA-01045: user ABC lacks CREATE SESSION privilege; logon denied."
Only E$_TARGET_ANI_TEST is created with no data. No such tables like C$_0TARGET_ANI_TEST, I$_TARGET_ANI_TEST are created and also data is not inserted in the target table TARGET_ANI_TEST.Hi,
I have checked that only E$ table is created. C$ and I$ table are not created ( I have selected my target schema as the part for the staging table).
All the parameters for dropping the tables are selected as "<default>:false".
I am importing the following KMs with the following parameters:
1) CKM Oracle
DROP_ERROR_TABLE
:false
DROP_CHECK_TABLE
:false
CREATE_ERROR_INDEX
:true
COMPATIBLE
:9
VALIDATE
:false
ENABLE_EDITION_SUPPORT
:false
UPGRADE_ERROR_TABLE
:false
2) LKM SQL to SQL
DELETE_TEMPORARY_OBJECTS
:true
3) IKM SQL Incremental Update
INSERT
:true
UPDATE
:true
COMMIT
:true
SYNC_JRN_DELETE
:true
FLOW_CONTROL
:true
RECYCLE_ERRORS
:false
STATIC_CONTROL
:false
TRUNCATE
:false
DELETE_ALL
:false
CREATE_TARG_TABLE
:false
DELETE_TEMPORARY_OBJECTS
:true -
Best way to export mass data from SAP R/3 to non-sap system
Hi,
I have to transfer mass data from a sap R/3 system to a non-sap system. Any experiences to find the best solution/interface?
Requirements:
- fast
- delta load ability
Any help will be appreciated.
Thanks,
DetlefHI,
Using Proxies is also a good option.
Thanks,
Manish -
Trying to query data from a view - ORA-01882 and ORA-02063 Errors
Hey there,
I tried to query data from a view that was provided by a colleague. This view works fine and gives correct data using PL/SQL Developer or SQLPLUS, but in SQL Developer, I get the following error:
ORA-01882: Time zone region not found
ORA-02063: preceding line from SYSTOOLS
01882.00000 - "timezone region %s not found"
* Cause: Specified reason name was not found
* Action: Please contact Oracle Customer Support
Vendor Code 1882
Where comes this error message from?! SYSTOOLS is the database link.
Can't see an obvious reason for this error.
OS is Windows 2000 SP4, SQL Developer is v1.1.1.25 BUILD MAIN-25.14
Regards,
ThomasFrom Oracle Messages 'Cause and Action'
http://www.oracle.com/technology/products/designer/supporting_doc/des9i_90210/cmnhlp72/messages/ora_messages.htm
ORA-01882, 00000, "timezone region %s not found"
Cause: The specified region name was not found.
Action: Please contact Oracle Customer Support.
Maybe invalid region in NLS_LANG?
"select * from v$nls_parameters"
Starting this script in all developer program and compared result... -
Plz help upgrade issue moving data from char type structure to non char typ
Hi Experts
plz help its very urgent
Data :workout(5000) .
FIELD-SYMBOLS : <FS_WORKOUT> TYPE ANY.
workout = ' u' .
ASSIGN WORKOUT TO <FS_WORKOUT> CASTING TYPE C .
BAPISDITM = <FS_WORKOUT>.
i am getting dump after BAPISDITM = <FS_WORKOUT>.
i think i am getting the dump bcoz i am moving character type structure to non character type structure but i think with field symbols we can remove this issue thats y i used it but its not working plz help me
its very urgent
*dump is :*
Short text
Data objects in Unicode programs cannot be converted.
What happened?
Error in the ABAP Application Program
The current ABAP program "ZSDR0009" had to be terminated because it has
come across a statement that unfortunately cannot be executed.
How to correct the error
Use only convertible operands "dst" and "src" for the statement
"MOVE src TO dst"
If the error occures in a non-modified SAP program, you may be able to
find an interim solution in an SAP Note.
If you have access to SAP Notes, carry out a search with the following
keywords:
"UC_OBJECTS_NOT_CONVERTIBLE" " "
"ZSDR0009" or "ZSDR0009_I02"
"USER_COMMAND"
thanx in advancei got d solution in this thread
Hi all,
data: gv_line(6000) type c.
Bvbapkom = gv_line.
But i am getting the Error like : gv_line and Bvbapkom are not mutually convertable.
Note: Bvbapkom is a Structure
How do i solve this ?
Mahesh
KR
Posts: 210
Registered: 11/24/06
Forum Points: 0
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Nov 30, 2007 8:40 AM in response to: KR Reply
Hi ,
i got the solution
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>.
Nasaka Ramakris...
Posts: 4
Registered: 1/19/08
Forum Points: 20
Re: gv_line and Bvbapkom are not mutually convertable.
Posted: Jan 19, 2008 7:42 AM in response to: KR Reply
Hi Check this answer.
ANSWER:
Field-symbols: <X_Bvbapkom> type x,
<X_gv_line> type x.
Assign: Bvbapkom to <X_Bvbapkom> casting,
gv_line to <X_gv_line> casting.
<X_Bvbapkom> = <X_gv_line>. -
Distributing customizing(control) data from SAP ECC to a non SAP System
Dear Experts,
I am currently working on an interface for distribution of different data to a non SAP System. One of these is customizing data (Company code, purchasing org. plant etc). The system expects a file and we shall implemet the following scenario: IDOC>XI>File
Questions:
1. Is it possible to use CONDAT Idoc to transfer customizing data to a non SAP System or is this only used for synchronisation of data between SAP Systems?
2.In case CONDAT cannot be used would you recommend creating a custom table, message type etc. for this case?
Please advise.
Thank you so muchHi Narasimha,
We can do this with the help of PI. Please find the below link.
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/404ee507-3fbc-2e10-00bc-be90ab28d036?QuickLink=index&overridelayout=true&52239687237174
Its from SAP PI to any other system.
Check this link too.. Proxy with Attachments.
Regards,
Siva -
How to pull data from Active Directory in ABAP (non-CUA approach)?
All,
We have a requirement to pull information from AD into a WAS 6.20 system.
I know there is the standard CUA/UME LDAP synchronization discussed at length in this forum but this in not what we are looking for. We would like to connect from an ABAP program (BAPI/RFC) to AD and pull a specific field and store it in a custom table.
I found one thread that describes how to do this with WebDynpro in Java, but this would be our last resort since we wouldn't be able to do that from the actual 6.20 WAS but would have to use another 2004s system which would extend the architecture of the current design.
Any thoughts?
Thanks
GSHi,
1. First configure the LDAP properties in transaction LDAP
2.You can use the functions LDAP_SYSTEMBIND and LDAP_SEARCH to retrieve the info you want
you can read <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/906061c5-176b-2910-5091-e23baa4e7038">this document</a> for more help -
Although i am entering only one character into the textfield then too it is reflecting the same error.
private void initEvents()
okButton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e) {
Connection conn = null;
Statement stmt = null;
try{
//STEP 2: Register JDBC driver
Class.forName("oracle.jdbc.driver.OracleDriver");
//STEP 3: Open a connection
System.out.println("Connecting to database...");
conn = DriverManager.getConnection("jdbc:oracle:thin:@localhost:1521:xe","hr","hr");
//STEP 4: Execute a query
System.out.println("Creating statement...");
stmt = conn.createStatement();
System.out.println(txtField);
String sql = "INSERT INTO DOCTORS VALUES ('"+txtField+"','"+textField_1+"','"+textField_1+"','"+textField_2+"','"+textField_3+"')";
JOptionPane.showMessageDialog(null,"Inserted Successfully!");
ResultSet rs = stmt.executeQuery(sql);
rs.close();
stmt.close();
conn.close();
}catch(SQLException se){
//Handle errors for JDBC
se.printStackTrace();
}catch(Exception e1){
//Handle errors for Class.forName
e1.printStackTrace();
}finally{
//finally block used to close resources
try{
if(stmt!=null)
stmt.close();
}catch(SQLException se2){
}// nothing we can do
try{
if(conn!=null)
conn.close();
}catch(SQLException se){
se.printStackTrace();
}//end finally try
}//end tryWhat is a the size of the text you are trying to insert?
Have you tried the increasing the size of 'Name' column to 658?
Most likely the size of Name column is 20. This isn't enough to fit in the value you are trying to insert.
You can increase the size of the Name column with alter table Hr.doctors modify ( Name column_type (658));
Let me know if this helps.
Regards,
Suntrupth -
Transfer Data from BW Server to NON SAP(I2) Server
Hi Experts
I have a requirement where I want to transfer the data from BW Infocube to a Non SAP System (I2).
Please let me know the step by step process to accomplish the requirement.
Regards
Akshay ChonkarI want to make the data available for the I2 server.
This is a non SAP Logistic system.
I have got infospoke as an option but i m confused as what do i do do with the data once it is in one of the /BIC/OXXXXXX tables
What do you mean by saying to a Relational database?
I got only 2 options in infospokes Dbtable and CSV.
Please elaborate your points -
ERROR : "Exceptions in Substep: Rules" while loading data from DSO to CUBE
Hi All,
I have a scenario like this.
I was loading data from ODS to cube daily. everything was working fine till 2 days before. i added some characteristic fields in my cube while i didn't do any change in my key figures. now i started reloading of data from ODS to cubes. i got the following error "Exceptions in Substep: Rules" after some package of data loaded successfully.
I deleted the added fields from the infocube and then i tried toreload data again but i am facing the same error again "Exceptions in Substep: Rules".
Can any one tell me how to come out from this situation ?
Regards,
Komik ShahDear,
Check some related SDN posts:
zDSo Loading Problem
Re: Regarding Data load in cube
Re: Regarding Data load in cube
Re: Error : Exceptions in Substep: Rules
Regards,
Syed Hussain. -
Not able to retrieve data from database through servlet
Hi friends,
I am trying to open a excel sheet through servlet. In this servlet i am retriving data from mssql database.I am not getting any error but no data is retrived
i m also pasting the code here
// Decompiled by Jad v1.5.8f. Copyright 2001 Pavel Kouznetsov.
// Jad home page: http://www.kpdus.com/jad.html
// Decompiler options: packimports(3)
// Source File Name: EmployeeData.java
import java.io.*;
import java.sql.*;
import javax.sql.*;
import javax.servlet.ServletException;
import javax.servlet.http.*;
public class EmployeeData extends HttpServlet
public EmployeeData()
public void service(HttpServletRequest httpservletrequest, HttpServletResponse httpservletresponse)
throws ServletException, IOException
httpservletresponse.setContentType("text/html");
httpservletresponse.setHeader("Content-Type", "application/excel");
httpservletresponse.setHeader("Content-Disposition", "filename=reports.xls");
PrintWriter printwriter = httpservletresponse.getWriter();
try
javax.servlet.http.HttpSession httpsession = httpservletrequest.getSession(true);
int i = 0;
/* Class.forName("com.microsoft.jdbc.sqlserver.SQLServerDriver").newInstance();
Connection connection = DriverManager.getConnection("jdbc:microsoft:sqlserver://localhost:3413;DatabaseName=newreportsodbc", "reportuser", "cisco");*/
String url="jdbc:odbc:newreportsodbc";
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver").newInstance();
Connection connection = DriverManager.getConnection("jdbc:odbc:newreportsodbc","reportuser","cisco");
Statement statement = connection.createStatement();
printwriter.println("<b><center><u> Search Results </u></center></b>");
printwriter.print("<table><tr><th color=brown background-color=#fff000> No. </th>");
printwriter.print("<th> DateTime </th></tr></table>");
ResultSet resultset = statement.executeQuery("SELECT * FROM t_Call_Type_Half_Hour");
boolean flag;
for(flag = false; resultset.next(); flag = true)
i++;
SerialNo = resultset.getString(2);
printwriter.print((new StringBuilder()).append("<table><tr><td> ").append(i).append("</td>").toString());
printwriter.print((new StringBuilder()).append("<td> ").append(SerialNo).append("</td></tr></table>").toString());
if(!flag)
printwriter.println("<h1> No records selected </h1>");
catch(Exception exception)
System.out.println((new StringBuilder()).append("SQLException: ").append(exception).toString());
static String empid1;
static String empid;
static String SerialNo;
static String designation;
}thanks in advance. i just feel there is something to be done with connection string.post the table format in SQL
-
Error while transporting data from DevBI to QualityBI
Hi all,
After transporting SD cubes,along with some warnings I received the foollowing error in BI quality system..
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated |
Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
I remember that sometimes transport error occurs if there is data inside master data object.Remove the data and transport the infoobject again.Is that right?
Please help me out how to resolve the error.
Thanks.Thanks for the reply.
I dont have an intention to delete the data from infoobject.
Somewhere I read that transport error results in some cases if there is data inside the infoobject.I am not sure if its correct or not.
Master Data Table /BI0/PMATERIAL contains data: Characteristic 0MATERIAL cannot be activated |
SID Table /BI0/SMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
| Text Table /BI0/TMATERIAL contains data: Characteristic 0MATERIAL cannot be activated
Inorder to solve the error,what should i do?
Please reply back. -
Error while loading data from R/3 to PSA
Hi,
While loading data from R/3 to PSA i am getting error 'the argument 0.6 j cannot be interpreted as a number when assing application structure.Actually in R/3 0.6 and JPY are 2 different columns.So when loading J is getting concatenated with 0.6,so i think i am getting this error.
Hope i am clear.
please help me to resolve this issue.
Thanks in Advance,
GirishHi,
U have to go thru the note and chk/compare the settings with ur system...i.e packages, levels...
If not take the assistance from BASIS...
Note; And also all the notes may not be the exact note tht matches ur issue always...its jst a comparision within our system...If it doesn't solve our issue we have to search for another alternative...
rgds, -
Error while replicating data from MSSQL to HANA
Hello Colleagues,
I have created SLT configuration where the replication has to happen from MSSQL database for NW BPM for 4 tables. I have also applied a transformation function to convert date columns in the BPM tables to right desired format while replicating in HANA.
Now when I use the SAP HANA Data Provisioning Editor to replicate the data from these BPM tables, I am getting following error :
Conv.obj. Z_BC_BPEM_EL_RDS_021: Calculation job in sender system could not be started
In the configuration I have used Job Options as No of data Transfers Job : 003 , Initial Load Jobs : 002 , No of Calculations Job : 001
We are using SLT 2.0 and BASIS release 740.
Please suggest what could be done to remove that.
Regards,
ArchanaArchana
There could be number of reasons for this issue. We need to first start filtering one by one and take out the possibility. Please check the things in the following order.
1. As everyone mentioned, check if you have free available WPs. System is going to use Background WP for running calculation job in the Source system. Normally Basis define sufficient number of WPs but sometimes they are occupied. You can check using TCode SM50 ( you need to do that on each host in a multi App server environment ).
2. Try increasing your calculation jobs in SLT using TCODE LTRC --> Administration Data --> Change no of Jobs. Make sure you have enough free background WP in your SLT and Source system.
Incase the above methods do not work, provide the following information.
1. Where exactly you see the error message. Are you able to add the table to Data provisioning from LTRC.
2. Are you able to add any more tables and do the replication.
Mahesh Shetty
Maybe you are looking for
-
Time characterstis format in flat file
hi all, can any one plz tell me the how we can give the format for time characteristics in flat file.. thanks & Regards
-
Simple and stupid question for apps dba
hi i have configured RAC 11gR2 on a C2D machine(just two nodes are there only) at home with 10gR2 db.its just a home configuration. As i am newbie and freshly starter,i want to install EBS R12 just to practice Some apps DBA stuff with that clusterwar
-
Hi, I recently installed Oracle Hyperion Data Relationship Management, Fusion Edition. Ive created a new application and repository using the management console succesfully, however when I try to run the Web Client, I get: --------===================
-
Can someone tell the reason why the publish button appears disabled ( letters color gray)?
-
NEED Help Importing new Activities.
Hi All, I am working on a project where I have been asked to add two new activities to all the 841 WBS codes belonging to the project. That means I have to add around 1600 new activities. So instead of going through the tedious task of adding those m