Best way to export mass data from SAP R/3 to non-sap system

Hi,
I have to transfer mass data from a sap R/3 system to a non-sap system. Any experiences to find the best solution/interface?
Requirements:
- fast
- delta load ability
Any help will be appreciated.
Thanks,
Detlef

HI,
Using Proxies is also a good option.
Thanks,
Manish

Similar Messages

What is the best way to export the data out of BW into a flat file on the S

Hi All,
We are BW 7.01 (EHP 1, Service Pack Level 7).
As part of our BW project scope for our current release, we will be developing certain reports in BW, and for certain reports, the existing legacy reporting system based out of MS Access and the old version of Business Objects Release 2 would be used, with the needed data supplied from the BW system.
What is the best way to export the data out of BW into a flat file on the Server on regular intervals using a process chain?
Thanks in advance,
- Shashi

Hello Shashi,
some comments:
1) An "open hub license" is required for all processes that extract data from BW to a non-SAP system (including APD). Please check with your SAP Account Executive for details.
2) The limitation of 16 key fields is only valid when using open hub for extracting to a DB table. There's no such limitation when writing files.
3) Open hub is the recommended solution since it's the easiest to implement, no programming is required, and you don't have to worry much about scaling with higher data volumes (APD and CRM BAPI are quite different in all of these aspects).
For completeness, here's the most recent documentation which also lists other options:
http://help.sap.com/saphelp_nw73/helpdata/en/0a/0212b4335542a5ae2ecf9a51fbfc96/frameset.htm
Regards,
Marc
SAP Customer Solution Adoption (CSA)

What is the best way to export a cutterline from photoshop?

What is the best way to export a cutterline from photoshop?
Wie exportiere ich am am besten einen Schnittlinie aus Photoshop? Ich bekomme von einem Wort immer nur den ersten Buchstaben exportiert, obwohl alles gerastert auf einer Ebene liegt.
Thank you! Vielen Dank!

What are you talking about exactly?
If you need to export vector data Photoshop is not the first choice but if you have Type Layers (without faux styles), Vector Masks or Paths it is possible.
alles gerastert auf einer Ebene
does not seem to make sense in this context though.

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

I am moving from PC to Mac. My PC has two internal drives and I have a 3Tb external. What is best way to move the data from the internal drives to Mac and the best way to make the external drive read write without losing data

Paragon even has non-destriuctive conversion utility if you do want to change drive.
Hard to imagine using 3TB that isn't NTFS. Mac uses GPT for default partition type as well as HFS+
www.paragon-software.com
Some general Apple Help www.apple.com/support/
Also,
Mac OS X Help
http://www.apple.com/support/macbasics/
Isolating Issues in Mac OS
http://support.apple.com/kb/TS1388
https://www.apple.com/support/osx/
https://www.apple.com/support/quickassist/
http://www.apple.com/support/mac101/help/
http://www.apple.com/support/mac101/tour/
Get Help with your Product
http://docs.info.apple.com/article.html?artnum=304725
Apple Mac App Store
https://discussions.apple.com/community/mac_app_store/using_mac_apple_store
How to Buy Mac OS X Mountain Lion/Lion
http://www.apple.com/osx/how-to-upgrade/
TimeMachine 101
https://support.apple.com/kb/HT1427
http://www.apple.com/support/timemachine
Mac OS X Community
https://discussions.apple.com/community/mac_os

Best Way to port the data from one DB to another DB using Biztalk

Hi,
please suggest best way to move the data from one db to another DB using biztalk.
Currently I am doing like that, for each transaction(getting from different source tables) through receive port, and do some mapping (some custom logic for data mapping), then insert to target normalized tables(multiple tables) and back to update the status
of transaction in source table in sourceDB. It is processing one by one.
How/best we we can do it using bulk transfer and update the status. Since it has more than 10000 transaction per call.
Thanks,
Vinoth

Hi Vinoth,
For SQL Bulk inserts you can always use SQL Bulk Load
adapter.
http://www.biztalkgurus.com/biztalk_server/biztalk_blogs/b/biztalksyn/archive/2005/10/23/processing-a-large-flat-file-message-with-biztalk-and-the-sqlbulkinsert-adapter.aspx
However, even though a SQL Bulk Load adapter can efficiently insert a large amount of data into SQL you are still stuck with the issues of transmitting the
MessageBox database and the memory issues of dealing with really large messages.
I would personally suggest you to use SSIS, as you have mentioned that records have to be processed in specific time of day as opposed to when the
records are available.
Please refer to this link to get more information about SSIS: http://msdn.microsoft.com/en-us/library/ms141026.aspx
If you have any more questions related to SSIS, please ask it in
SSIS
forum and you will get specific support.
Rachit

HT204655 What is the best way to export a photo from OS X Photos to Photoshop?

What is the best way to export a photo from OS X Photos to Photoshop?

Just a note: if you Option-drag the thumbnail to the Desktop you'll get the original file. Regular dragging will get you the preview version or the edited version if it's been edited in Photos.

Best way to accept a date from a user

Hi Guys,
Whats the best way to get a date from a user and add it in an
insert record to access.
I have a form that adds a record and it works well enough as
long as the data added is in the correct format.
Untill now ive just had a text box with an explination to the
user on how to add the date and what format....
But Im fed up with having to change bad entrys and need to
place a control or something on the form but dont know whats
easiest and best?
Any ideas welcome.
Thanks

If you want today's date set the database up to insert the
date
automatically. If you want other dates than today's use a
date picker or
calendar to insert the date.
Dave
"Tag2007" <[email protected]> wrote in
message
news:epj87p$mar$[email protected]..
> Hi Guys,
>
> Whats the best way to get a date from a user and add it
in an insert
record to
> access.
>
> I have a form that adds a record and it works well
enough as long as the
data
> added is in the correct format.
>
> Untill now ive just had a text box with an explination
to the user on how
to
> add the date and what format....
>
> But Im fed up with having to change bad entrys and need
to place a
control or
> something on the form but dont know whats easiest and
best?
>
> Any ideas welcome.
> Thanks
>

What is the best way to transfer my date from my old iMac to my new iMac?

what is the best way to transfer my date from my old iMac to my new iMac? I don't have a time capsule, so I cannot use time machine.
thanks

Your best bet by far is to use Setup Assistant when the new Mac first starts up to transfer directly from the old one.
It's similar to Migration Assistant, but doing it that way will avoid having an extra user account.
Either way, you can connect them via FireWire, Thunderbolt, or your network, but avoid wireless if at all possible. You can connect both to your netwrork via Ethernet, or put a single cable between the two.
See Using Setup Assistant on Mountain Lion or Lion for details.

Transfer Data from SAP system to non-SAP system

Hi all,
I want to send material no, site and price data from SAP system to non-SAP system. Would you tell me how can I do it
Thanks
Arif
Moderator message: please do more research before asking, show what you have done yourself when asking.
Edited by: Thomas Zloch on Oct 16, 2011 10:38 PM

Hi,
you can create the same...
but normal practice what we do is create swc for each system so that it is easy to maintain and easy to extend in the future..
or else follow some conventions if you are just starting the things..
HTH
Rajesh

What is the best way to mimic the data from production to other server?

Hi,
here we user streams and advanced replication to send the data for 90% of tables from production to another production database server. if one goes down can use another one. is there any other best option rather using the streams and replication? we are having lot of problems with streams these days they keep break and get calls.
I heard about data guard but dont know what is use of it? please advice the best way to replicate the data.
Thanks a lot.....

RAC, Data Guard. The first one is active-active, that is, you have two or more nodes accessing the same database on shared storage and you get both HA and load balancing. The second is active-passive (unless you're on 11.2 with Active Standby or Snapshot Standby), that is one database is primary and the other is standby, which you normally cannot query or modify, but to which you can quickly switch in case primary fails. There's also Logical Standby - it's based on Streams and generally looks like what you seem to be using now (sort of.) But it definitely has issues. You can also take a look at GoldenGate or SharePlex.

What is the best way to remove personal data from the hard drive in preparation for selling my old Mac?

I am going to sell or perhaps donate my old Power Mac G5. Is there an easier, yet comprehensive way to remove my data from the hard-drive? My best approach is dumping anything I do not want found into the trash.
I am running Mac OS 10.5.8 on the powermac G5

For better security than the simple Erase (which does not actually over-write the data blocks, only clears the directory), choose Security Options, and Zero all data, one pass.
After a Zero all data, the only way to recover the data is to dis-assemble the drive in a clean room and use expensive test gear to recover a little of the data. That is good for all but Military Secrets.
If you really trust no one under any circumstances, remove the drive and beat it to death with a hammer.

Best way to use basic data from another DB?

Hi, I have a database where I need to use basic information such as (Table Person and other Human Resources tables) My database needs those tables, should I create those tables in my model too? and through scripts fill that information? or there is a direct way to do it, such as a trigger or something. Can you give different solutions with different database engines? such as Oracle, mysql or MSSQL or just one thanks a lot!

diego10 wrote:
I see I need to be specific, Well from MSSQL to Oracle
You could have a process on MSSQL to push data to Oracle. In this case, MSSQL is just another client to the oracle database, using MSSQL "linked server". This could be a scheduled batch process or a trigger. (I'm assuming MSSQL has triggers).
You could have a process on Oracle pull data from MSSQL via a db_link in the Oracle database. Obviously a trigger would not be useful, because there would be no triggering event on the Oracle database.
You could create a view in the oracle database that selects from MSSQL via a db_link. This would avoid trying to keep duplicated data in sync, but would not allow the app in Oracle to actually maintain the data, just view it when needed.
The best solution will depend on the specific needs.

Best way to push change data from sql server to windows/web application

i apologized that i do not know should i ask this question in this forum or not.
i have win apps which will load all data initially from db and display through grid but from the next time when any data will change in db or any data will be inserted newly in db then only change or newly inserted data need to be pushed from db side to
my win apps. now only sql dependency class is coming to my mind but there is a problem regarding sql dependency class that it notify client but do not say which data is updated or inserted.
so i am looking for best guidance and easy way to achieve my task. what will be the best way to push data from sql server to win or web client.
there is two issue
1) how to determine data change or data insert. i guess that can be handle by trigger
2) next tough part is how very easily push those data from sql server end to win apps end.
so looking for expert guide. thanks

Hello,
Yes, you can create DML trigger on INSERT and UPDATE to get the changed data into a temp table. And then query the temp table from application.
If you are use SQL Server 2008 or later version, you can also try to use
Change data capture, which
can track insert, update, and delete activity that is applied to a SQL Server table and store the changed values on the Change Table.
Regards,
Fanny Liu
Fanny Liu
TechNet Community Support

Best way to copy ALL DATA from song to song?

Hello everyone,
I'm in the middle of scoring a film and have ran into what seems to be a corrupted song, and want to attempt to transfer all data from this song into a new file.
I'm running multiple global tracks with changes in tempos and time sigs all over, multiple audio tracks, and various Virtual instruments. I also have an extensive environment in which I use instrument tracks to access my exs instruments, as well as multi-instrument tracks for kontakt 2. Of course I have this saved as a template, but as you know as projects progress, the current song rarely looks like your autoload. So simply copying and pasting will not work, as I have many new instruments and audio files in different places in my arrange page. Thus when I try to copy and paste, logic sees that the current tracks are not "correct" and asks to "create new instruments" which seems to randomly throw all the instruments to the bottom of my arrange page, making it all out of whack!
With some help from the audio config window and some manual editing of the arrange page, I was able to get my song pretty much back to normal, but for future reference, what is the best way to transfer all of my data to another song, while still keeping the look and functionality of the song intact?
Thanks in advance for your help! If it helps to see what I'm talking about, I'm willing to post my song file for reference, just ask.

I'd LOVE to somehow avoid #4 if possible. As I stated
above, my projects always change from the templates
due to extra audio tracks, audio instruments, etc, so
a simple "copy and paste" does not seem to work.
Is there something I'm missing?
Yup, I was missing something really simple. If you choose NOT to copy instruments, it will ask you to keep the instrument or create a new track. If you keep the instrument (since my instruments names remained the same as the template) logic will connect the tracks with the instruments and only put the additional tracks (i.e. extra audio tracks etc) on the bottom. WAY COOL!
Now my process is a little easier, however if you have any other tips so share please feel free to post.

Best way to remove old data from db?

Hi,
I am looking some ways to keep my database small and remove old data from database and archive it somewhere else. the data may need to be put back to the database in the future. One of the things I am conserned is how to enforce constraints? In other words, when I remove data, all the related pk/fk data should be removed together. Any suggestions will be greatly appreciated.
Thanks

hope this may help u
concept is : exp/imp & truncate will reclaim the space
method1
do an export and secure the dump(say dump1) for future purpose.
delete the unwanted data.
commit.
now again export the tables ( say dump2).
now do the import(dump2).
/*now this import will reclaim the the unused space.*/
method 2
/* depennded on volume of data */
-- create backup of existing table for future
create table backup_table nologging as select * from original_table;
-- create copy1 of existing table
create table copy_table nologging as select * from original_table;
-- truncate the original table, so that highwater mark is reset.
truncate table original_table;
-- insert data from copy_table into original table
insert /*+ APPEND */ into original_table select * copy_table where(ur conditions for data);
commit all the work.
/* now u have 3 tables
backup_table - with all the data - for future reload
original_table - with unwanted data deleted and space reclaimed.
copy_table - copy of original table.
now u drop the copy_table
drop table copy_table;
regards

Best way to export mass data from SAP R/3 to non-sap system

Similar Messages

Maybe you are looking for