0HR_PT_3 Load is taking too much time when i execute the Info package

Dear All,
i am working on HR Module.
i am extracting data from 0HR_PT_3 from R/3 PRD system through info package its taking long time to load data.
I have checked in RSA3 in R/3 PRD system whenever i extract "0HR_PT_3"  instead of showing records  its showing this error message "Infotype 2002 not read due to lack of authorization" .
could you please let me know any one have resolve this issue.
Thanks,
Venkat.
Edited by: venkatnaresh7 on Jul 12, 2011 11:49 AM

hi
I am facing same issue. did you able to fix this?

Similar Messages

  • Load is taking too much time & going to short dump.

    Hi,
                We have around 1000 records to be loaded from r/3 . The  load is taking too much time and it is still running.
    When tried to manually update the records ,we are getting an error ' converting  the rate into indirect quote: CAD/USD( ex. rate type EURX). Did any one faced this type of error.
    Thanks,
    APR

    Hi,
    what are you trying to do? If you wanna load exchange rates this can be done via context menu of the appropriate source system ( transfer global settings/exchange rates)

  • Report is taking too much time when running from parameter form

    Dear All
    I have developed report in oracle reports bulider 10g. while running it from report builder data is coming very fast.
    But, If it is running from parameter form it is taking too much time to format report in PDF.
    Please suggest any configuration or setting if anybody is having Idea.
    Thanks

    Hi,
    The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
    Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
    Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
    If you still cannot determine the difference then trace both sessions.
    Rod West

  • Query taking too much time when running through discover

    Hi
    I have created report with sql query by creating custom folder in oracle discover desktop. Query is using parameter with sys_context. When report is executed from discover it takes more than 5 minutes and same query is executed in 30 seconds when executed in database through toad.
    Pls. let me know what could be the reason for this?
    Thanks

    Hi,
    The first thing to check is whether the query is running to completion in TOAD. By default, TOAD just selects the first 50 rows, where as Discoverer must return all the rows before displaying results if a crosstab report is used.
    Secondly, check that the queries and the explain plans are the same in Discoverer and Toad. Although, Discoverer shows the SQL in the SQL inspector this isn't necessarily the SQL actually sent to the database. Use TOAD to interogate the Discoverer session to determine the actual SQL and compare this SQL and explain plan to SQL you ran in TOAD.
    Thirdly, check that the session context is the same in both cases. So check that any custom contexts and the USER_ENV context is the same, and if any security packages or VPD policies are used in the SQL that these have been initialised the same.
    If you still cannot determine the difference then trace both sessions.
    Rod West

  • ODS to CUBE load taking too much time..

    Hi all ,
    we are loading the data from our ZODS to ZCUBE, but the data load is taking too much time , we haven't created any indexes , we alsotried by making infosource for the ODS but still tha same problem .. It is always showing 0 from 345674 records that is the records are not getting extracted from ODS .
    Can anybody help me in this regards , it is a bit urgent ..
    Thanks in advance.

    Hi,
    there are a few you can check. First you should check if this job hasn't ended in a dump with ST22.
    The next thing you can do, if the job doesn't end abnormaly, is to reduce the amount of records processed at the same time. Sometimes the system has trouble if the amount of records that it has to process is too large. Go to the InfoPackage -> DataS. Default Data Transfer -> Fill the maximum to 10% of de the default value. Try to run the load again.
    If the job still doesn't finish then you have to check wether or not there are any ABAP routines and/or formula involved in the update rule ? Maybe they running in a loop.
    regards,
    Raymond Baggen
    Uphantis bv

  • Report taking too much time in the portal

    Hi freiends,
    we have developed a report on the ods,and we publish the same on the portal.
    the problem is when the users are executing the report at the same time it is taking too much time.because of this the perfoemance is very poor.
    is there any way to sort out this issue,like can we send the report to the individual user's mail id
    so that they can not log in to the portal
    or can we create the same report on the cube.
    what could be the main difference if the report made on the cube or ods?
    please help me
    thanks in advance
    sridath

    Hi
    Try this to improve performance of query
    Find the query Run-time
    where to find the query Run-time ?
    557870 'FAQ BW Query Performance'
    130696 - Performance trace in BW
    This info may be helpful.
    General tips
    Using aggregates and compression.
    Using less and complex cell definitions if possible.
    1. Avoid using too many nav. attr
    2. Avoid RKF and CKF
    3. Many chars in row.
    By using T-codes ST03 or ST03N
    Go to transaction ST03 > switch to expert mode > from left side menu > and there in system load history and distribution for a particular day > check query execution time.
    /people/andreas.vogel/blog/2007/04/08/statistical-records-part-4-how-to-read-st03n-datasets-from-db-in-nw2004
    /people/andreas.vogel/blog/2007/03/16/how-to-read-st03n-datasets-from-db
    Try table rsddstats to get the statistics
    Using cache memory will decrease the loading time of the report.
    Run reporting agent at night and sending results to email. This will ensure use of OLAP cache. So later report execution will retrieve the result faster from the OLAP cache.
    Also try
    1. Use different parameters in ST03 to see the two important parameters aggregation ratio and records transferred to F/E to DB selected.
    2. Use the program SAP_INFOCUBE_DESIGNS (Performance of BW infocubes) to see the aggregation ratio for the cube. If the cube does not appear in the list of this report, try to run RSRV checks on the cube and aggregates.
    Go to SE38 > Run the program SAP_INFOCUBE_DESIGNS
    It will shown dimension Vs Fact tables Size in percent.If you mean speed of queries on a cube as performance metric of cube,measure query runtime.
    3. To check the performance of the aggregates,see the columns valuation and usage in aggregates.
    Open the Aggregates...and observe VALUATION and USAGE columns.
    "---" sign is the valuation of the aggregate. You can say -3 is the valuation of the aggregate design and usage. ++ means that its compression is good and access is also more (in effect, performance is good). If you check its compression ratio, it must be good. -- means the compression ratio is not so good and access is also not so good (performance is not so good).The more is the positives...more is useful the aggregate and more it satisfies the number of queries. The greater the number of minus signs, the worse the evaluation of the aggregate. The larger the number of plus signs, the better the evaluation of the aggregate.
    if "-----" then it means it just an overhead. Aggregate can potentially be deleted and "+++++" means Aggregate is potentially very useful.
    In valuation column,if there are more positive sign it means that the aggregate performance is good and it is useful to have this aggregate.But if it has more negative sign it means we need not better use that aggregate.
    In usage column,we will come to know how far the aggregate has been used in query.
    Thus we can check the performance of the aggregate.
    Refer.
    http://help.sap.com/saphelp_nw70/helpdata/en/b8/23813b310c4a0ee10000000a114084/content.htm
    http://help.sap.com/saphelp_nw70/helpdata/en/60/f0fb411e255f24e10000000a1550b0/frameset.htm
    performance ISSUE related to AGGREGATE
    Note 356732 - Performance Tuning for Queries with Aggregates
    Note 166433 - Options for finding aggregates (find optimal aggregates for an InfoCube)
    4. Run your query in RSRT and run the query in the debug mode. Select "Display Aggregates Found" and "Do not use cache" in the debug mode. This will tell you if it hit any aggregates while running. If it does not show any aggregates, you might want to redesign your aggregates for the query.
    Also your query performance can depend upon criteria and since you have given selection only on one infoprovider...just check if you are selecting huge amount of data in the report
    Check for the query read mode in RSRT.(whether its A,X or H)..advisable read mode is X.
    5. In BI 7 statistics need to be activated for ST03 and BI admin cockpit to work.
    By implementing BW Statistics Business Content - you need to install, feed data and through ready made reports which for analysis.
    http://help.sap.com/saphelp_nw70/helpdata/en/26/4bc0417951d117e10000000a155106/frameset.htm
    /people/vikash.agrawal/blog/2006/04/17/query-performance-150-is-aggregates-the-way-out-for-me
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1955ba90-0201-0010-d3aa-8b2a4ef6bbb2
    https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/ce7fb368-0601-0010-64ba-fadc985a1f94
    http://help.sap.com/saphelp_nw04/helpdata/en/c1/0dbf65e04311d286d6006008b32e84/frameset.htm
    You can go to T-Code DB20 which gives you all the performance related information like
    Partitions
    Databases
    Schemas
    Buffer Pools
    Tablespaces etc
    use tool RSDDK_CHECK_AGGREGATE in se38 to check for the corrupt aggregates
    If aggregates contain incorrect data, you must regenerate them.
    202469 - Using aggregate check tool
    Note 646402 - Programs for checking aggregates (as of BW 3.0B SP15)
    You can find out whether an aggregate is usefull or useless you can find out through a proccess of checking the tables RSDDSTATAGGRDEF*
    Run the query in RSRT with statistics execute and come back you will get STATUID... copy this and check in the table...
    This gives you exactly which infoobjects it's hitting, if any one of the object is missing it's useless aggregate.
    6
    Check SE11 > table RSDDAGGRDIR . You can find the last callup in the table.
    Generate Report in RSRT
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/cccad390-0201-0010-5093-fd9ec8157802
    https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4c0ab590-0201-0010-bd9a-8332d8b4f09c
    Business Intelligence Journal Improving Query Performance in Data Warehouses
    http://www.tdwi.org/Publications/BIJournal/display.aspx?ID=7891
    Achieving BI Query Performance Building Business Intelligence
    http://www.dmreview.com/issues/20051001/1038109-1.html
    Assign points if useful
    Cheers
    SM

  • While condition is taking too much time

    I have a query that returns around 2100 records ( not many ! ) , when I am processing my result set with a while condition , it's taking too much time ( around 30 seconds ). Here is the code
    public static GroupHierEntity load(Connection con)
         throws SQLException
         internalCustomer=false;
         String customerNameOfLogger = com.photomask.framework.ControlServlet.CUSTOMER_NAME;
    if ( customerNameOfLogger.startsWith("DPI") || customerNameOfLogger.startsWith("DUPONT") || customerNameOfLogger==null || customerNameOfLogger.equals("") ||customerNameOfLogger.equals("Unavailable") )
    { internalCustomer=true;}
    // System.out.println(" ***************** customer name of logger " + com.photomask.framework.ControlServlet.CUSTOMER_NAME + "internal customer " + internalCustomer);
    // show all groups to internal customers and only their customer groups for external customers
    if (internalCustomer) {
              stmtLoad = con.prepareStatement(sqlLoad);
         ResultSet rs = stmtLoad.executeQuery();
         return new GroupHierEntity(rs); }
         else
         stmtLoadExternal = con.prepareStatement(sqlLoadExternal);
         stmtLoadExternal.setString(1, customerNameOfLogger);
         stmtLoadExternal.setString(2, customerNameOfLogger);
         // System.out.println("***** sql " +sqlLoadExternal);
         ResultSet rs = stmtLoadExternal.executeQuery();
    return new GroupHierEntity(rs);
    GroupHierEntity ge = GroupHierEntity.load(con);
    while(ge.next())
    lvl = ge.getInt("lvl");
    oid = ge.getLong("oid");
    name = ge.getString("name");
    if(internalCustomer) {
    if (lvl == 2)
    int i = getAlphaIndex(name);
    super.setAppendRoot(alphaIndex);
    gn = new GroupListDataNode(lvl+1,oid,name);
    gn.setSelectable(true);
    this.addNode(gn);
    count++;
    System.out.println("*** count "+ count);
    ge.close();
    ========================
    Then I removed every thing in the while clause and just run as it is , still it is taking same time ( 30 secs )
    while(ge.next())
    {count++;}
    Why the while condition ( ge.next() ) is taking so much time ? Is there any other efficient way of reading the result set ?
    Thanks ,
    bala

    I tried all these things. The query is not taking much time ( 1 sec ). but the resultset.next() is taking too much time. I counted the time by putting System.out.pr.. at various points to see whuch is taking how much time.
    executeQuery() is only taking 1 sec. Processing the result set ( moving the cursor to next position ) is taking too much time.
    I have similar queries that return some 800 rows , that only takes 1 sec.
    I have doubt on resultset.next(). Any other alternative ?

  • Server0 process taking too much time

    Hi All,
        Once i start the Netweaver server, the server) process taking too much time.
    When i was installed Netweaver that time 13 min, after 2 months 18 min.. then 25 min now it is taking 35 minutes.... to become green color.
    Why it is taking too much time, what might be the cause.....
    Give some ideas to solve this problem..............
    The server0 developer trace has this information continuously 6 to 7 times...
    [Thr 4204] *************** STISEND ***************
    [Thr 4204] STISEND: conversation_ID: 86244265
    [Thr 4204] STISEND: sending 427 bytes
    [Thr 4204] STISearchConv: found conv without search
    [Thr 4204] STISEND: send synchronously
    [Thr 4204] STISEND GW_TOTAL_SAPSEND_HDR_LEN: 88
    [Thr 4204] NiIWrite: hdl 0 sent data (wrt=515,pac=1,MESG_IO)
    [Thr 4204] STIAsSendToGw: Send to Gateway o.k.
    [Thr 4204] STIAsRcvFromGw: timeout value: -1
    [Thr 4204] NiIRead: hdl 0 recv would block (errno=EAGAIN)
    [Thr 4204] NiIRead: hdl 0 received data (rcd=3407,pac=2,MESG_IO)
    [Thr 4204] STIAsRcvFromGw: Receive from Gateway o.k.
    [Thr 4204] STISEND: data_received: CM_COMPLETE_DATA_RECEIVED
    [Thr 4204] STISEND: received_length: 3327
    [Thr 4204] STISEND: status_received: CM_SEND_RECEIVED
    [Thr 4204] STISEND: request_to_send_received: CM_REQ_TO_SEND_NOT_RECEIVED
    [Thr 4204] STISEND: ok
    [Thr 4204] STIRCV: new buffer state = BUFFER_EMPTY
    [Thr 4204] STIRCV: ok
    [Thr 4204] *************** STSEND ***************
    [Thr 4204] STSEND: conversation_ID: 86244265
    [Thr 4204] STISearchConv: found conv without search
    [Thr 4204] STSEND: new buffer state = BUFFER_DATA
    [Thr 4204] STSEND: 106 bytes buffered
    [Thr 4204] *************** STIRCV ***************
    [Thr 4204] STIRCV: conversation_ID: 86244265
    [Thr 4204] STIRCV: requested_length: 16000 bytes
    [Thr 4204] STISearchConv: found conv without search
    [Thr 4204] STIRCV: send 106 buffered bytes before receive
    [Thr 4204] STIRCV: new buffer state = BUFFER_DATA2
    [Thr 4204] *************** STISEND ***************
    then
    [Thr 4252] JHVM_NativeGetParam: get profile parameter DIR_PERF
    [Thr 4252] JHVM_NativeGetParam: return profile parameter DIR_PERF=C:\usr\sap\PRFCLOG
    this message continuously
    Can i have any solution for the above problem let me know .
    Thanks & regards,
    Sridhar M.

    Hello Manoj,
           Thanks for your quick response, Previously the server has 4GB RAM and now also it has same.
    Yesterday i found some more information, like deployed(through SDM) applications also take some memory at the time of starting the J2EE server...Is it right?
    Any other cause...let me know
    Thanks & Regards,
    Sridhar M.

  • Why it is taking too much time to kill the process?

    Hi All,
    Today,one of my user ran the calc script and the process is taking too much time, then i kill the process. I am wondering about one thing here even it is taking too long to kill the process, generally it will not take more than 2 sec. I did this through EAS.
    After that I ran Maxl statement
    alter system kill request 552599515;
    there is no use at all.
    Please reply if you have any solutions to kill this process.
    Thanks in advance.
    Ram.

    Hi Ram,
    1. Firstly, How much time does your calculation scripts normally run.
    2. While it was running, you can go to the logs and monitor where exactly the script is taking time .
    3. Sometimes, it does take time to cancel a transaction ( as it might be in between).
    4. Maxl is always good to kill ,as you did . It should be succesful . Check the logs what it says ,and also the "sessions" which might say "terminating" and finish it off.
    5. If nothing works ,and in the worst case scenarion , if its taking time without doing anything. Then log off all the users and stop the databas and start it .
    6. Do log off all the users, so that you dont corrupt any filter related sec file.
    Be very careful , if its production ( and I assume you have latest backups)
    Sandeep Reddy Enti
    HCC
    http://hyperionconsultancy.com/

  • ACCTIT table Taking too much time

    Hi,
      In SE16: ACCTIT table i gave the G/L account no after that i executed in my production its taking too much time for to show the result.
    Thanku

    Hi,
    Here iam sending details of technical settings.
    Name                 ACCTIT                          Transparent Table
    Short text            Compressed Data from FI/CO Document
    Last Change        SAP              10.02.2005
    Status                 Active           Saved
    Data class         APPL1   Transaction data, transparent tables
    Size category      4       Data records expected: 24,000 to 89,000
    Thanku

  • Taking too much time to load application

    Hi,
    I have deployed a j2ee application on oracle 10g version 10.1.2.0.2. But the application is taking too much time to load. After loading ,everything works fast.
    I have another 10g server (same version) in which the same application is loading very fast.
    When I checked the apache error logs found this :-
    [Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
    [Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
    [Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
    [Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
    [Thu Apr 26 09:17:31 2007] [warn] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
    [Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
    [Thu Apr 26 09:17:31 2007] [error] [client 10.1.20.9] [ecid: 89128867058,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
    [Thu Apr 26 11:36:36 2007] [notice] FastCGI: process manager initialized (pid 21177)
    [Thu Apr 26 11:36:37 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
    [Thu Apr 26 11:36:37 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
    [Thu Apr 26 11:36:37 2007] [warn] long lost child came home! (pid 9124)
    [Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0015: recv() returns 0. There has no message available to be received and oc4j has gracefully (orderly) closed the connection.
    [Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
    [Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
    [Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
    [Thu Apr 26 11:39:51 2007] [warn] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0184: Failed to find an oc4j process for destination: home
    [Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0145: There is no oc4j process (for destination: home) available to service request.
    [Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0119: Failed to get an oc4j process for destination: home
    [Thu Apr 26 11:39:51 2007] [error] [client 10.1.20.9] [ecid: 80547835731,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
    [Thu Apr 26 11:46:33 2007] [notice] FastCGI: process manager initialized (pid 21726)
    [Thu Apr 26 11:46:34 2007] [notice] Oracle-Application-Server-10g/10.1.2.0.2 Oracle-HTTP-Server configured -- resuming normal operations
    [Thu Apr 26 11:46:34 2007] [notice] Accept mutex: fcntl (Default: sysvsem)
    [Thu Apr 26 11:46:34 2007] [warn] long lost child came home! (pid 21182)
    [Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] oc4j_socket_recvfull timed out
    [Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] (4)Interrupted system call: MOD_OC4J_0038: Receiving data from oc4j exceeded the configured "Timeout" value and the error code is 4.
    [Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0054: Failed to call network routine to receive an ajp13 message from oc4j.
    [Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0033: Failed to receive an ajp13 message from oc4j.
    [Thu Apr 26 11:53:32 2007] [warn] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0078: Network connection errors happened to host: lawdb.keralalawsect.org and port: 12501 while receiving the first response from oc4j. This request is recoverable.
    [Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0121: Failed to service request with network worker: home_15 and it is not recoverable.
    [Thu Apr 26 11:53:32 2007] [error] [client 10.1.20.9] [ecid: 89138452752,1] MOD_OC4J_0013: Failed to call destination: home's service() to service the request.
    Please HELP ME...

    Hi this is what the solution given by your link
    A.1.6 Connection Timeouts Through a Stateful Firewall Affect System Performance
    Problem
    To improve performance the mod_oc4j component in each Oracle HTTP Server process maintains open TCP connections to the AJP port within each OC4J instance it sends requests to.
    In situations where a firewall exists between OHS and OC4J, packages sent via AJP are rejected if the connections can be idle for periods in excess of the inactivity timeout of stateful firewalls.
    However, the AJP socket is not closed; as long as the socket remains open, the worker thread is tied to it and is never returned to the thread pool. OC4J will continue to create more threads, and will eventually exhaust system resources.
    Solution
    The OHS TCP connection must be kept "alive" to avoid firewall timeout issues. This can be accomplished using a combination of OC4J configuration parameters and Apache runtime properties.
    Set the following parameters in the httpd.conf or mod_oc4j.conf configuration files. Note that the value of Oc4jConnTimeout sets the length of inactivity, in seconds, before the session is considered inactive.
    Oc4jUserKeepalive on
    Oc4jConnTimeout 12000 (or a similar value)
    Also set the following AJP property at OC4J startup to enable OC4J to close AJP sockets in the event that a connection between OHS and OC4J is dropped due to a firewall timeout:
    ajp.keepalive=true
    For example:
    java -Dajp.keepalive=true -jar oc4j.jar
    Please tell me where or which file i should put the option
    java -Dajp.keepalive=true -jar oc4j.jar ??????/

  • Full DTP taking too much time to load

    Hi All ,
    I am facing an issue where a DTP is taking too much time to load data from DSO to Cube via PC and also while manually running it.
    There are 6 such similar DTP's which load data for different countries(different DSO's and Cubes as source and target respectively) for last 7 days based on GI Date. All the DTP's are pulling almost same no. of records and finish within 25-30 min. But only one DTP takes around 3 hours. The problem started couple of days back.
    I have change the Parallel processes from 3->4->5 and packet size from 50,000->10,000->1.00.000 but no improvement. Also want to mention that all the source DSO's and target Cubes have the same structure. All the transformations have Field Routines and End Routines.
    Can you all please share some pointers which can help.
    Thanks
    Prateek

    HI Raman ,
    This is what I get when I check the report. Can this be causing issues as 2 rows have % >= 100
    ETVC0006           /BIC/DETVC00069     rows:      1.484    ratio:          0  %
    ETVC0006           /BIC/DETVC0006C     rows: 15.059.600    ratio:        103  %
    ETVC0006           /BIC/DETVC0006D     rows:        242    ratio:          0  %
    ETVC0006           /BIC/DETVC0006P     rows:         66    ratio:          0  %
    ETVC0006           /BIC/DETVC0006T     rows:        156    ratio:          0  %
    ETVC0006           /BIC/DETVC0006U     rows:          2    ratio:          0  %
    ETVC0006           /BIC/EETVC0006      rows: 14.680.700    ratio:        100  %
    ETVC0006           /BIC/FETVC0006      rows:          0    ratio:          0  %
    ETVC0007           rows: 13.939.200    density:              0,0  %

  • R3load ttaking too much time when table REPOSRC is loaded

    Hello,
    I am installing the SAP ECC 6.0 SR2 on SUN Solaris 10 on DB2 V9.1.  17 jobs of the 19 have been completed in ABAP Import phase but it is taking too much time while doing this SAPSSEXC. It is running aroung 10 hours.  There is no error is giving. So I have canceled the SAP Installation. After that I have started through manual OS command
    /sapmnt/<SID>/exe/R3load -dbcodepage 4102 -i /<instdir>/SAPSSEXC.cmd -l /<instdir>/SAPSSEXC.log -stop_on_error -merge_bck
    It is also running around 9 hours. I do not why it is happening and when it will be completed.
    Can you help me what will check for doing this job fast or can help me how to resolve this issue?
    I have checked these SAP notes 454368 and 455195
    If i change any DB2 parameter, I have to restart the DB2 Database. What will I do? I can not understand what to do now.
    Please help me ASAP.
    Thanks
    Gautam Poddar

    Hello,
    running the R3load import step manually you might try to add the option
    -loadprocedure fast LOAD
    Pay attention to write the LOAD in capital letters!
    This will invoke the LOAD-API whenever possible.
    This should save some time on "normal" tables without LOB-columns.
    For your table REPOSRC that has a BLOB column the LOAD-API will not be taken.
    So I am sorry this will not work for your special case.
    (Thanks for the hint to Frank-Martin Haas)
    Kind regards
    Waldemar Gaida
    Edited by: Waldemar Gaida on Jan 10, 2008 8:26 AM

  • Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

    Creative Cloud is taking too much time to load and is not downloading the one month trial for Photoshop I just paid money for.

    stop the download if it's stalled, and restart your download.

  • Hi from the last two days my iphone have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    Hi,  from the last two days my iphone( iphone 4 with ios 5) have very slow to open the apps and very slow when i check the notification window , it taking too much time to open when i tap to down . help me to resolve the issue.

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore...
    iPhone Reset
    http://support.apple.com/kb/ht1430
    Try this First... You will Not Lose Any Data...
    Turn the Phone Off...
    Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
    Wait for the Apple logo to Appear and then Disappear...
    Usually takes about 15 - 20 Seconds... ( But can take Longer...)
    Release the Buttons...
    Turn the Phone On...
    If that does not help... See Here:
    Backing up, Updating and Restoring
    http://support.apple.com/kb/HT1414

Maybe you are looking for