1.35 PB time machine backup?

Hi everyone.
I am trying to perform a routine time machine backup and continue to get the error message below. My one and only hard drive installed on my machine is a 256GB SSD. Don't know why time machine suddenly thinks the backup requires 1.35 PB. I use as Phantom 1TB drive attached by USB for my time machine backups.  I have backed up this exact system configuration for several months before repeatedly getting this same error message for 2 weeks now. Any info would be greatly appreciated.
- Lucas
2009 Unibody Macbook
2.4 GHz Intel Core 2 Duo
4 GB DDR3
256 GB Agility 4 SSD
OSX 10.8.2

This simple procedure will clear your Time Machine settings, including both overt and hidden exclusions. If you have a long exclusion list that can't be recreated easily, you may prefer a more complicated procedure that preserves the exclusion list. In that case, ask for instructions. Otherwise, do as follows.
Triple-click the line below to select it:
/Library/Preferences/com.apple.TimeMachine.plist
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu. A Finder window should open with a file selected. Copy it to the Desktop. Then move it (the original, not the copy) to the Trash. You'll be prompted for your administrator password. Reboot, recreate your settings in the Time Machine preference pane, and run a backup to test. If TM now performs as expected, delete the file you copied to the Desktop.

Similar Messages

  • I want a new and more powerful (non-Apple) wireless router but I still want to use my existing Time Capsule to continue with my Time Machine backups and I still need the Time Capsule's Network Attached Storage (NAS) features and capabilities

    THE SHORTER STORY
    My goal is to successfully use my existing Time Capsule (TC) with a new and more powerful wireless router. I need a new and more powerful wireless router in order to reach a distant Denon a/v receiver that is physically located in a master bedroom some 50 feet away from my modem. I need to provide this Denon a/v receiver with an Internet connection so that it can obtain its firmware updates and I need to connect this Denon a/v receiver to my network in order to use its AirPlay feature. I believe l still need the TC's Network Attached Storage (NAS) features because I am not sure if the new wireless router will provide me with the NAS like features / capabilities I need to share files between my two Apple laptops with OS X 10.8.2. And I know that I absolutely need my TC's seamless integration with Apple's Time Machine (TM) application in order to continue to make effortless backups of my two Apple laptops. To my knowledge nothing works with TM like Apple's TC. I also need the hard disk storage space built into the TC.
    I cannot use a long wired Ethernet cable connection in this apartment and I cannot use power-line adapters. I have read that wireless range extenders and repeaters are difficult to successfully set-up and that they will reduce data speeds, especially so when incorrectly set-up. I cannot relocate my modem and/or primary base station wireless router.
    In short, I want to use my TC with my new and more powerful wireless router. I need to stop using the TC to connect to the modem. However, I still need the TC for seamless TM backups. I also need to use the TC's built in hard drive for storage. And I may still need the TC's NAS capabilities to share files wirelessly between laptops because I am assuming the new wireless router will not provide NAS capabilities for OS X 10.8.2 (products like this/non-Apple products rarely seem to work with OS X 10.8.2/Macs to provide NAS features and capabilities). Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone please advise on how to set-up my new Asus wireless router with my existing TC in such a way to accomplish all of this?
    What is the best configuration or set-up to accomplish my above goals?
    Thank you in advance for your assistance!!!
    THE FULL STORY
    I live in an apartment building where my existing Time Capsule (TC) is located in my living room and serves many purposes. Specially, my TC is at least all of the following:
    (1) Wi-Fi router connected to Comcast Internet service via Motorola SB6121 cable modem - currently the TC is the Wi-Fi base station that connects to the modem and has the gateway address to the Internet. The TC now provides the DHCP service for the Wi-Fi network.
    (2) Wireless router providing Internet and Wi-Fi network access to several Wi-Fi clients - two Apple laptop computers, an iPod touch, an iPad and an iPhone all connect wirelessly to the Internet via the TC.
    (3) Wired Ethernet router providing Internet and Wi-Fi network access to three different devices - a Panasonic TV, LG Blu-Ray player and an Apple TV each use one of the three LAN ports on the back of the TC to gain access to the Internet.
    (4) Primary base station in my attempt to extend my wireless network to a distant (located far away) Denon a/v receiver requiring a wired Ethernet connection - In addition to the TC, which is my primary base station, I am also using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. I cannot use a wired Ethernet connection to continuously travel from the living room to the master bedroom. The distance is too great as I cannot effectively hide the Ethernet cable in this apartment.
    (5) Time Machine (TM) backup facilitator - I use my TC to wirelessly back-up two Apple laptops using Apple's Time Machine (TM) application. However, I ran out of storage space on my TC and therefore added external storage to it. Specifically, I added an external hard drive to my TC via the USB port on the back of the TC. I now use this added external hard drive connected to the TC via USB as the destination storage drive for my TM back-ups. I have partitioned the added external hard drive, and each of the several partitions all have enough storage space (e.g., each of the two partitions used by TM are sized at three times the hard drive space of each laptop, etc.). Everything works flawlessly.
    (6) Network Attached Storage (NAS) - In addition to using the TC's Network Attached Storage (NAS) capabilities to wirelessly back-up two Apple laptops via TM, I also store other additional files on both (A) the hard drive built into the TC and (B) the additional external hard drive connected to the TC via USB (there are additional separate partitions on this drive for these other additional and non-TM backup files).
    I use the TC's NAS feature with my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Again, everything works wirelessly and flawlessly. (Note: the Apple TV is connected to the network via Ethernet and a LAN port on the back of the TC).
    The issue I am having is when I try to listen to music via Apple's AirPlay in the master bedroom. This master bedroom is located at a distance of two rooms away from the TC's current location in the living room, which is a distance of about 50 feet. This apartment has a long rectangular floor plan where each room is connected to the next in a straight line. In order to use AirPlay in the master bedroom I am using a second extended Wi-Fi base station (a Netgear branded product) to wirelessly extend my WiFi network to a Denon receiver located in the master bedroom and requiring a wired Ethernet connection. This additional base station connects wirelessly to the WiFi network provided by my TC and then gives my Denon receiver the wired Ethernet connection it needs to use AirPlay. I have tried moving my iTunes music directly onto my laptop's hard drive, and then I used AirPlay on this same laptop to connect to the Denon receiver. I always get a successful connection and the song plays, but the problem is that the connection inevitably drops.
    I live in an apartment building and all of the many wireless routers in this building create a great deal of WiFi interference on both the 2.4 GHz and 5GHz bands. I have tried connecting the Netgear product to each the 2.4 and 5 GHz bands, but neither band can successfully maintain a wireless connection between the TC and the Netgear product. I also attempted to maintain a wireless connection to an iPod touch using the 2.4 GHz band and AirPlay on this iPod touch to play music on the Denon receiver. Again, I was able to establish a connection and successfully play music, but after a few minutes the connection dropped and the music stopped playing. I therefore have concluded that I have a poor wireless connection in the master bedroom. I can establish a connection, but it is intermittent with frequent drops. I have verified this with both laptops by working in the master bedroom for an entire day on both laptops. The Internet connection in this master bedroom proved to drop out frequently - about once an hour with the laptops. The wireless connection and the frequency of its dropout are far worse with the iPod touch and an iPhone.
    I cannot relocate the TC. Also, this is an apartment and I therefore cannot extend the range of my network with Ethernet cable (I cannot drill through walls/ceilings, etc.). It is an old building with antiquated wiring and power-line adapters are not likely to function properly, nor can I spare the direct power outlet required with a power-line adapter. I simply need every outlet I can get and cannot afford to block any direct outlet.
    My solution is to use a more powerful wireless router. I found the ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router which will likely provide a better connection to my wireless Internet in the master bedroom than the TC. The 802.11ac band of this Asus wireless router is totally useless to me, but based on what I have read I believe this router will provide a stronger connection at greater distances then my TC. And I will be ready for 802.11ac when it becomes more widely available.
    However, I still need to maintain the TC's ability to work seamlessly with TM to backup my two laptops. Also, I doubt the new Asus router will provide OS X 10.8.2 with NAS like features and capabilities. Therefore, I still would like to use the TC's NAS capabilities to share files on my network wirelessly assuming the Asus wireless router fails to provide this feature. I need a new and more powerful wireless router, but I need to maintain the TC's NAS features and seamless integration with TM. Finally, I want to continue to use my Apple laptop and AirPlay to wirelessly access and play my iTunes music collection stored on the TC's hard drive. I also want to continue to use my Apple laptop, AirPlay and Apple TV to wirelessly watch movies and TV shows stored on the additional external hard drive connected to the TC via USB. Can someone advise on how to set-up my existing TC with this new Asus wireless router in such a way to accomplish all of this?
    Modem
    Motorola SB6121 SURFboard DOCSIS 3.0 Cable Modem
    Existing Wireless Router and Primary Wi-Fi Base Station - Apple Time Capsule
    Apple Time Capsule MC343LL/A 1TB Sim DualBand (purchased June 2010, likely the Winter 2009 Model)
    Desired New Wireless Router and Primary Wi-Fi Base Station - Non-Apple Asus
    ASUS RT-AC66U Dual-Band Wireless-AC1750 Gigabit Router
    Extended Wi-Fi Base Station - Provides an Ethernet Connection to a Denon A/V Receiver Two Rooms Away from the Modem
    Netgear Universal Dual Band Wireless Internet Adapter for TV & Blu-Ray (WNCE3001)
    Addition External Hard Drive Attached to the Existing Apple Time Capsule via USB
    WD My Book Studio 4TB Mac External Hard Drive Storage USB 3.0
    Existing Laptops on the Wireless Network Requiring Time Machine Backups
    MacBook Air (11-inch, Mid 2012) OS X 10.8.2
    MacBook Pro (13-inch Mid 2010) OS X 10.8.2
    Other Existing Apple Products (Clients) on the Wireless Network
    iPod Touch (second generation) is model A1288.
    iPad (1st generation)
    Apple TV (3rd generation) - Quantity two (2)

    Thanks Bob Timmons.
    In regards to a Plan B, I hear ya brother. I am already on what feels like Plan Z. Getting WiFi to a far off room in an apartment building crowded with WiFi routers is a major pain.
    I am basing my thoughts on the potential of a new and more powerful router reaching the far off master bedroom based on positive reviews on cnet.com, pcmag.com and pcworld.com. All 3 of these web sites have reviewed the Asus RT-AC66U 802.11AC wireless router as well as its virtual twin cousin 802.11n router. What impressed me is that all 3 sites rated this router #1 overall in terms of both range and speed (in both the 802.11n and 802.11AC flavors). They tested the router in real world scenarios where the router needed to compete with a lot of other wireless routers. One of the sites even buried this Asus router in a media room with thick walls and inside a media cabinet. This Asus router should be able to serve my 2.4 GHz band wireless clients (iPod Touch and iPhone 4) with a 2.4GHz Wireless-N band offering some 50 feet of dependable range and a 60 Mbps throughput at that range. I am hoping that works, but it's borderline for my master bedroom. My 5 GHz wireless clients (laptops) will enjoy a 5GHz Wireless-N band offering 150 feet of range and a 200 Mbps throughput at that range. I have no idea what most of that stuff means, but I did also read that Asus could reach 300 feet and I got really excited. My mileage may vary of course and I'm sure I'm making some mistakes in my interpretation of their data. However, my Winter 2009 Time Capsule was rated by cnet.com to deliver real world performance of less than that, and 802.11AC may or may not be useful to me someday. But when this Asus arrives and provides anything other than an excellent and consistent wireless signal without drops in the master bedroom it's going right back!
    Your solution sounds great, but I have some questions. I'm using OS X 10.8.2 and Airport Utility (version 6.1 610.31) and on its third tab labeled "Wireless" the top option enables you to set "Network Mode" to either:
    Create a wireless network
    Extend a wireless network
    Off
    Given your advice to "Turn off the wireless on the TC," should I set Network Mode to Off? Sorry, I'm clueless in regards to how to turn off the wireless on the TC any other way. Can you provide specific steps on how to turn off the wireless on the TC? If what I wrote is correct then what should the rest of this Wireless tab look like, or perhaps it is irrelevant when wireless is off?
    Next, what do you mean by "Configure the TC in Bridge Mode?" Under Airports Utility's fourth tab labeled "Network" the top option "Router Mode" allows for either:
    DHCP and Nat
    DHCP Only
    Off (Bridge Mode)
    Is your advice to Configure the TC in Bridge Mode as simple as setting Router Mode to Off (Bridge Mode)? If yes, then what should the rest of this "Network" tab look like? Anything else involved in configuring the TC in Bridge Mode or is it really as simple as setting the Router Mode to "Off (Bridge Mode)"?
    How about the other tabs in Airport Utility, can they all stay as is assuming I use the same network name and password for the new Asus wireless router? Or do I need to make any other changes to the TC via Airport Utility?
    Finally, in regards to your Plan B suggestion. I agree. But do you have a Plan B for me? I would greatly appreciate any alternative you could provide. Specifically, if you needed a TC's Internet connection to reach a far off corner of your home how would you do it? In the master bedroom I need both a wired Ethernet connection for the Denon a/v receiver and wireless Internet connection for the iPhone and iPod Touch.
    Power-Line Adapters - High Cost, Blocks at Least One Wall Outlet and Does Not Solve the Wireless Need
    I actually like exactly one power-line adapter, which is the D-Link DHP-540 PowerLine AV 500 4-Port Gigabit Switch. This D-Link power-line adapter plugs into your wall outlet with a normal sized plug (regular standard power cord much like any other electronic device) instead of all of the other recommended power-line adapters that not only use at least one wall outlet but also often block the second outlet. You cannot use a power strip with a power-line adapter which is very impractical for me. And everything about my home is strange and upside down. The wiring here is a disaster and I don't have faith in its ability to carry Internet access from the living room to the master bedroom. And this D-Link power-line adapter costs $90 each and I need at least two to make the connection to the Denon A/V receiver. So, $180 on this solution and I still don't have a dependable drop free wireless connection in the master bedroom. The Denon might get its Ethernet Internet connection from the power-line adapter, but if I want to use an iPhone 4 or iPod Touch to stream AirPlay music to the Denon wirelessly (Pandora/iTunes, etc.) from the master bedroom the wireless connection will not be stable in there and I've already spent $190 on just the two power-line adapters needed.
    Extenders / Repeaters / Wirelessly Extending the Wireless Network
    I have also read great things about the Amped Wireless High Power Wireless-N 600mW Gigabit Dual Band Range Extender (Repeater) SR20000G and the My Net Wi-Fi Range Extender. The former is very powerful and the latter is easier to install. Both cost about $150 ish so similar to a new Asus router. However, everything I read about Range Extenders points to them not being very effective for a far off corner of your house wherein it's apparently hard to place the range extender in the sweet spot where it both gets a strong enough signal to actually effectively extend the wireless signal and otherwise does not reduce network throughput speeds to unacceptable speeds.
    Creating a Roaming Network By Hard Wiring with Ethernet Cable - Wife Would Say, "**** No!"
    Even Apple seems to warn against wirelessly extending your network (see: http://support.apple.com/kb/HT4145#) and otherwise strongly recommends a roaming network where Ethernet cable is used to connect two wireless base stations. However, I am in an apartment where stringing together two wireless base stations with Ethernet cable would have an extremely low wife acceptance factor (WAF). I cannot (both contractually and from a skill prospective) hide Ethernet wire in the walls or ceiling. And having visible Ethernet cable running from room-to-room would be unacceptable, especially to the wife.
    So what is left? Do you have a Plan B for me? Thanks in advance for your help!

  • Data Recovery of Time Machine Backup From a Corrupted Drive

    I had to install 10.2 and 9.2.2 on an internal drive in my 2003 MDD G4 but first I had to reformat it (and wipe out its data) since it did not have OS 9 drivers installed. No problem thinks I since its contents are backed up to my 500 GB Western Digital HD. Installation of 10.2/9.2.2 was successful but when I go back into 10.5.8 to restore the contents of the newly formatted drive the external drive with the Time Machine backup will not mount. It churns and grinds forever and nothing I've tried (after consulting the WD support web site) helps. It is recognized by Disk Utility but that is all.
    Any thoughts on whether/how to recover the lost backup? Many thanks in advance.

    mvaldeslora wrote:
    Well, I am happy to report a happy ending. Turns out DW had crashed but I initiated the procedure again and it was able to rebuild the drive's directory in a couple of hours. Time Machine then recognized the drive and I was able to restore the contents of the drive on which I installed 10.2/9.2.2 earlier in this saga. I will reformat the external WD drive now and see how it performs before I decide whether it's a keeper or not. Thanks for all comments and observations.
    Yay!
    If those are your only backups, please do yourself a favor: do not trust them to that drive! Get a new one, and put TM backups on one, and use the other to regularly update a "clone" or at least home folder backups via CarbonCopyCloner, SuperDuper, or the like.
    Murphy was an optimist!

  • I have replaced my old hard drive with a new SSD drive. Can I restore a complete Time Machine backup

    I have replaced my old hard drive on a MacBook Pro midyear 2010 with a new SSD drive. I have a complete system backup of my old drive in an external hard drive using Time Machine.
    Questions that I would like to get answered.
    1) Can I connect my external hard drive to the macbook pro and use that to boot up my machine by pressing and holding down the Options key? Once booted up successfully, can I use Disk Utility to format the new SSD and then restore the complete time machine backup?
    2) If that is not possible, can I use my old drive which I can connect using a USB adapter and use that to boot up by following the same strategy as listed in Step#1 above?
    3) If neither options are possible, do I need to use a bootable USB drive for Mavericks OS X to boot up the machine,
    I have Mavericks OS X ( 10.9.6) and I do not have a DVD of the OS.
    Any help is appreciated.

    Let me first document the steps that did not work and then I will document the steps that worked.
    1) Replaced the hard drive with SSD.
    2) Connected the original hard drive using a USB adapter to the MacBook to make it behave like an external device.
    3) Powered on the machine and on hearing the chime pressed Command-R to start in recovery mode.
    4) Chose the Disk Utility option to erase and format the SSD. The format chosen was Mac OS Extended Journaled.
    5) Once the formatting was done, then clicked on the "Restore" tab in Disk Utility
    6) In the Source field, dragged my original hard drive from the left pane and placed it in the field
    7) On the destination field, choose the new SSD drive. Clicked on "Restore". Gave me a warning, accepted the warning and the restore was under way.
    8) I had 236 GB to restore so took 3.5 hours before it was done.
    9) Disconnected the external hard drive ( my original internal HDD), shut down the machine and powered on again.
    10) Heard the chime and after that it was a white screen with no Apple logo.
    Was visibly upset and started thinking what my next move will be. Then tried these steps
    1) Again powered off the machine.
    2) Connected my internal HDD once more as an external drive
    3) Powered on and on hearing the chime, pressed Command-R as before
    4) Once the OS X utilities screen popped up, this time chose Install OS X
    5) Erased the contents of SSD once more and reformatted it using Mac OS Extended Journaled.
    6) Installed OS X by following the prompts.
    7) Once the OS was installed, I was presented with an option on how to transfer data to this new Mac
    8) Chose the option to move the data from my original HDD.
    9) Took another 3 hours to move the data.
    10) Removed the original HDD once the transfer was complete, powered down the machine and started it once more.
    11) Booted successfully and all my content is now accessible on the new SSD.
    Moral of the story - It is the spirit that counts.

  • I'm having a hard time setting up my external hard from with my AirPort Extreme and Time Machine Backups.

    I have been using a Mac Mini with an external hard and Time Machine.  I bought an Airport Extreme and have had problem setting up the hard drive using the USB port on the Airport Extreme.  I also just recently bought a Mac Book Air and hope to have both computers back up to the external hard drive using Time Machine and Airport Extreme.  I have been using the optical drive from the Mac mini to load programs into the Mac Book Air.  I think I'm just getting confused in Finder.  I am just not seeing the hard drive.  I ended up plugging the hard drive back into the Mac Mini and that is work fine again.  How do I setting the external hard drive up to the AirPort Extreme and use for both computers?  Or at least to start with the Mac mini.

    It's critical to understand that Time Machine (TM) stores backups differently between local and network drives. That would mean the TM backup on your locally attached USB hard drive will not be directly useable when it is connected to the AirPort Extreme Base Station (AEBS). There is a way to copy a local version to a network version, but it is not fool-proof. When you do connect this drive and point TM to it, TM will start a brand new backup, leaving your existing backup as is.
    If your current backup is critical to you, you may want to consider getting a second USB drive to attach to the Extreme and use your existing one as a backup ... or use TM's multi-backup process to backup to more than one destination drive alternatively.
    So, at this point, you may want to make a decision on how you want to go forward to help provide a solution for you.
    To directly answer your question, when you go to select a destination for a Time Machine backup, the drive(s) that show up under "Backup Disks" are those that TM already recognizes and has backed up to. Those listed under "Available Disks" are drives (either local or on the network) that TM can back up to.

  • Initial Time Machine Backup Stuck on "Indexing Backup"

    I have Mac Mini running 10.7.2.  I just got an external hard drive and am trying to run an initial back up using Time Machine.  I am running my computer in Safe Mode as it won't start in regular mode.  I formatted the HD and began to run Time Machine back up.  HD is connected via USB 2.0 wire.
    It has now been 12 hours and is still on Indexing Backup...  Is this normal for initial back up?  I know it takes a long time for initial but this doesn't seem right.What do I do to correct if it isn't correct?  Should I stop and try again?

    Thank you very much.  With your info I gave up on the back up and ran Disk and Permission Repair for the 3rd or 4th time and crossed my fingers and restarted my machine and it WORKED!  I ran time Machine back up and when I woke up this morning it was all done!  Yeahhhh!
    I wasn't sure what was causing it not to start in regular mode and as I'm not too much of a techie I was scared that I was teetetering on the brink of losing everything.  The machine would run so I didn't think it was a hard drive issue, but not knowing for sure I was concerned and after losing everythign once before years ago, I was worried. I have it backed up on line but wanted a 2nd (local) version that wouldn't entail tying up bandwidth for days.  In the end it worked out!
    But the short answer is, Time Machine Backup does NOT work in Safe Mode...

  • Restore Time Machine backup after hard drive crash

    My hard drive on the mac book crashed, so I replaced it.  Now I need to get my time machine back up on the new drive.  I've already started using the computer and reinstalled lion, so I'm not getting the original "backup" screen.  How do I find my old time machine backups?

    Your best bet is to do a full restore from your backups.  See #14 in Time Machine - Frequently Asked Questions.

  • Can SL restore from a Lion Time Machine backup?

    I want to downgrade from Lion to SL.  If I do a fresh install of SL will it be able to read my Lion Time Machine backup to restore my applications and data?

    To clarify any perceived inconsistency between my advice and that of sig's, my presumption was that you were going to do a complete restore from Time Machine.  If that's not the case, sig's advice is important.

  • Can't start with Snow Leopard Time Machine backup in Lion

    Hi,
    I have seen coverage in MacWorld (http://www.macworld.com/article/161421/2011/07/migrate_time_machine_backup_to_ne w_mac_in_lion.html) of using my Snow Leopard Time Machine backup as the starting point for my Lion TM backup. This saves all my revision history of all my documents and makes them available in Lion. However, when I follow the steps given in the MacWorld article, I don't get the same set of dialog boxes and am never given the option to use a previous disk.
    Any hints to getting this to work would be much appreciated.
    -Eric

    A  whole  lot  about  Time  Machine for help with TM problems.  Also you can select Mac Help from the Finder's Help menu and search for "time machine" to locate articles on how to use TM.  See also Mac 101- Time Machine.
    Pondini's Time Machine FAQ

  • Can I exclude places.sqlite from time machine backup?

    Hi,
    Just looking at the time machine backup and raised a question about the repeated backup of places.sqlite in "~/Library/Application Support/Firefox/Profiles/xxxxxxxx.default/", I am wondering if I can exclude this file from my backup or even exclude Profiles from my backup?
    What would this affect my backup? Are these all essentials?
    I have looked into this page and understand what places.sqlite does. However, what don't know is if this file is missing, does Firefox produce one automatically?
    Or say, if each of my places.sqlite in the prevoius backups was like 90MB, how much size would them really take in the storage?

    Alvyn wrote:
    Thus, I am thinking if this "places.sqlite" thing is there every hour putting around 100MB to my time capsule, quickly my time capsule will be depleted.
    No, that's very small.
    Is there any way to do something like trimming time points from time capsule?
    Under normal circumstances, you shouldn't have to. TM automatically "thins" (deletes) backups every time it does a new backup, on the following schedule:
    "Hourly" backups after 24 hours (except the first of the day, which is a "Daily" backup).
    "Daily" backups after a month (except the first of each week, which is a "Weekly" backup.)
    "Weekly" backups are kept until TM needs the space for new backups; then one or more of the oldest weeklies will be deleted.
    So after a month, even if you do an hourly backup every day, and that 100 mb file is changed and backed-up +*every time+* (not real likely), you'd have 54 backups (1 per day plus 24). That would take a total of 5.4 GB, small potatoes on any TM drive, and really not worth worrying about.
    But if you want, you could delete all the backups of it. See #12 in the Frequently Asked Questions *User Tip,* also at the top of this forum.

  • Can't access library folder on Time Machine Backup

    I'll try to explain this as clearly as possible...
    1) I have wiped my hard drive and completed a clean install of Mavericks.  I did this due to persistant problems with disc permissions that I could not eliminate.
    2) I did not want to take a chance on introducing problems with migrating a profile from my Time Machine backup so instead of using Migration Assistant, I used Finder to browse the Time Machine backup I made prior to reformatting my drive to simply copy all my necessary data files back onto the drive in my newly created profile.
    3) I've reinstalled the majority of programs I use and everything is looking good (no disk permission problems when I've checked using Disk Utility).
    4) Mail is working just find with all my accounts having been restored using my Apple ID.
    Here's the problem....
    I forgot that some of my mail had been stored on my local hard drive.  I beleive this mail should be in my user/library/mail folder of my time machine backup.  However, I cannot access my User/Library folder in Time Machine.  I've tried opening my current (new) User/Library folder in Finder and then selecting "Browse Other Backup Discs" from the Time Machine icon and, although this opens the Time Machine backups, I cannot do any time travel...in other words, although there are many stacks of folders shown in the backup, I cannot move into the past from the present.
    Any suggestions on how I can get this Mail folder out of the Time Machine user/library?  I know there is some stuff there that I'm going to have to get to.
    Thanks!

    It woked to get me into my current User/Library of my "new" profile but I cannot move back in time into the actual backups despite the timeline increments on the right side of the screen in Time Machine showing they're are backups for the past several months.  I'm stuck on this moment so to speak.
    Got to hit the sack...head is swimming.  Thanks for the suggestions Barney.  Let me know if you think of any others.

  • Can I restore Office 2004 from Time machine backup

    Hi Guys,
    I have managed to delete office 2004 when I was trying to install office 2008 using a friend's copy. Office 2008 will not work for me as it needs online registration.
    I no longer have the office 2004 install disk. Is it possible to re-install office 2004 from my time machine backup. I can see it is available in the backup from before yesterday but not sure if I try to restore what will happen.
    Any advice appreciated.
    Thanks,
    Paul

    Hi PaulieHK,
    Open Finder on you original view desktop.
    No go to Application folder and select the Office 2004.
    NOW, select the Time Machine icon in the dock and it will bring you back in history.
    You can go back before you tried to install Office 2008.
    Select IN Time Machine the application Office 2004 and click on PUT BACK.
    Time machine will now put back the situation as it was before the installing Office 2008.
    When you see your original desktop again try to open Office 2004.
    Good luck ...
    Dimaxum

  • Can Yosemite read a snow leopard Time Machine backup

    Can Yosemite read a snow leopard Time Machine backup. Once I installed Lion over SL and it was a disaster since I could not get any docs or photos back, so had to put SL back on my old iMac.
    Will 10.10 give the same problem or is there a way to migrate the old 10.6.8 data to 10.10?
    Thanks

    Yes, you can do that. The only limitation is that you can't encrypt the backup volume.

  • Not enough space on my new SSD drive to import my data from time machine backup, how can I import my latest backup minus some big files?

    I just got a new 256GB SSD drive for my mac, I want to import my data from time machine backup, but its larger than 256GB since it used to be on my old optical drive. How can I import my latest backup keeping out some big files on the external drive?

    Hello Salemr,
    When you restore from a Time Machine back up, you can tell it to not transfer folders like Desktop, Documents. Downloads, Movies, Music, Pictures and Public. Take a look at the article below for the steps to restore from your back up.  
    Move your data to a new Mac
    http://support.apple.com/en-us/ht5872
    Regards,
    -Norm G. 

  • Cannot access user data in Time Machine backup

    I had some corrupt files on my iMac and after a lot of troubleshooting I had to do a clean install of OS X.
    I had a Time Machine backup of the Mac with the corrupt files so I did not use the migration tool. I just want to get the files off my desktop and some other user files (/user/userX/desktop) from the backup.
    When I go into the Time Machine backup to restore anything in the User folder; I get access denied.
    Is there a way to take ownership of that folder? I need this data.
    Message was edited by: Tom515

    Strongly suggest erasing, reinstalling the OS, and using the migration tool. Resolves all such permissions and access issues.

  • Can I move all data from time machine backup to another external drive & work from it?

    Hi all, the harddrive on my macbook died (2nd time in a year) & I had a new one put in that's much smaller than the old one.  Can I move everything from my time machine backup onto a seperate external drive and work directly from that on my laptop/imac?  At the mo. I don't think time machine will recognise my computer as it's a new drive etc.  Thanks Jenny.

    What exactly do you want to do?
    Is it that you wish to extract an older version of some documents to edit, but leave the original intact?
    You can Restore an older version from TM and choose not to replace the current one.
    Or, do you wish to install the OS on your new drive, and migrate all the information from the TM backup to the new isntallation?
    EDIT: Ok, re-reading your question, I think macjack probably has the right idea.
    However, see Pondini's Time Machine FAQ # 16

Maybe you are looking for