1.41 SR1 - Inbound calls to all model phones ring only 1 time

Has anyone else run into the scenario:
1. End user has modified ringtone to something other than default on CUCM 792x wifi phone
2. Call is presented to wifi phone but is only audible on first ring
3. Call is still being presented to phone but no audible ring tone is being presented
4. User must be looking at phone to see flashing LEDs to know that call is still being presenteg
I see the open bug in 1.41 SR1 - CSCtj21700 Phone may not play out the ring tone or audio when call shows connected - wondering if anyone else is hitting this.
Also - is there any easy way to prevent the users from being able to modify their ringtone settings on their wifi phones?
TIA,
Amir

More than likely you are encnountering CSCto03375 and not CSCtj21700.
CSCto03375 7925 Ring Delay issues with certain ringtones
CSCtj21700 requires a powercycle as there is no audio at all, so doesn't sound like a match.
Both CSCto03375 and CSCtj21700 were listed as open caveats in the 1.4(1)SR1 release notes.
http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g_7925gEX_7926/firmware/1_4_1SR1/english/release/notes/792x_141SR1.html#wp197591
Both issues will be resolved in the 1.4(2) release due out at the end of the year.
For now, you can open a TAC SR to request 1.4.1.1.1.7 ES image for either 7921 or 7925, depending on which model you are using, which has both of these issues resolved.
However, 1.4.1.1.1.7 does not contain seamless interband roaming support (roaming between 5 GHz and 2.4 GHz)
Select one of the following workarounds for now until 1.4(2) is released.
1) If you don't need seamless interband roaming support, then use 1.4.1.1.1.7 for now.
2) If you need interband roaming support, then use Chirp 1 as the ring tone for now.

Similar Messages

When someone calls me, all my devises ring together in my family.

When someone calls me, all my devises ring together in my family.

That is a new feature described in Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
You can turn it off by going to Settings > FaceTime and changing "iPhone Cellular Calls" to off on each device.
You may also want to consider or investigate using separate Apple IDs for each family member.

Possible Bug !? Incoming FXO Call Reboots all the phones !

System is simple enough.
3xSPA303G phones. 2xFXO trunk. 1xSIP trunk.
Nothing else !
Incoming call from FXO line goes to extension 101, she starts to talk than after a few seconds, the voice goes away. When she hangs up, all the phones reboot. Reason of reboot shows "SIP triggered" on all phones. This happens all the time and everytime there is a call from FXO.
Also when there is an incoming call from the FXO line and is forwarded to again ext 101, but Extention 100 <grpick> the call, there is no problem !
Logs are attached.
This problem is killing us. Someone please help !
Anyone ?
Cisco ?

Hi Dogus,
Could you please contact the Small Business Support Center at the phone number listed (Please pick the appropriate phone number in your region) in the link attached? One of our engineers should be able to assist you with this issue.
http://www.cisco.com/en/US/support/tsd_cisco_small_business_support_center_contacts.html
Best regards,
Wendy Yang

Separate Recents into incoming and outgoing calls like all other phones!

please allow me to view only incoming or only outgoing calls
add a filter
create separate lists
whatever it takes
no more apologists please
this is a simple, reasonable change
won't break current users
will please many

FYI - this is a user to user help forum only. These discussions are provided and moderated by Apple, and certainly there are some Apple employees who peruse these discussions on occasion, but each post and thread here is not read by a moderator or by any Apple employee.
If you want to ensure that your feedback is at least forwarded to and read by the appropriate Apple personnel but with no guarantee that your request will be implemented by Apple anytime soon if ever, you should use this link instead.
http://www.apple.com/feedback/iphone.html

No incoming calls at all Linksys phone adapter SPA2102

I was wondering if anyone can help me. The phone company I was with went under and I am having major difficulties with hooking my linksys phone adapter up to my computer through a router. I can make outgoing calls but everytime that someone calls in it goes strait to the answering machine. Can someone please help me this has been like this for three weeks. I have a D link router that I need my Linksys phone adapter (VOIP) SPA2102 to go through. Please Help !!!!!!!
Message Edited by tinabeebe28 on 10-24-2008 08:51 AM

tinabeebe28 : SPA-2102 also contains router with NAT.
By default, it's only possible to access the SPA-2102's internal WEB from the PC hooked to LAN socket of the SPA-2102 ... WAN web access is disabled by default in the config. Also, the IP may not be 192.168.0.1, this is configureable.
I advice you to use the IVR function (**** 210) from the phone in LINE1 socket to obtain the LAN IP address of the SPA-2102 and then access this address via the SPA's LAN.
More details and/or also the SPA admin guide, and SPA-2100 admin suplement can be found for example here :
http://www.sipura.net/support/
Those are a bit old PDF manuals but it explains basic info about SPA-xxxx adapters, how to use the IVR, how to setup the adapter, what the different options mean etc ... I think it's a usefull reading.

Attention All Windows Phone Gurus! Time to SPRING Into Action!

April fools out of the way, now let's find an April genius!
The name "April" is derived from the Latin verb "aperire", meaning "to open", as it is the season when trees, flowers AND MINDS start to open! And.. I can't wait to OPEN and read this month's community contributions!
(groan, tenuous link!)
Things are indeed heating up around TechNet. The Wiki has become a shining example of what the community has to offer, and talent is SPRINGING FORTH from all corners of our garden of knowledge.
If you can find the time to enrich us with your latest revelations, or some fascinating facts, then not only will you build up a profile and name for yourself within the gaze of Microsoft's very own glitterati, but you will be adding pages to the most respected
source for Microsoft knowledge base articles. This could not only boost your career, but would benefit generations to come!
So don't be an April fool. Please realise the potential of this platform, realise where we are going, and join us in growing this community, learning more about you, and opening the minds of others!
All you have to do is add an article to TechNet Wiki from your own specialist field. Something that fits into one of the categories listed on the submissions page. Copy in your own blog posts, a forum solution, a white paper, or just something
you had to solve for your own day's work today.
Drop us some nifty knowledge, or superb snippets, and become MICROSOFT TECHNOLOGY GURU OF THE MONTH!
This is an official Microsoft TechNet recognition, where people such as yourselves can truly get noticed!
HOW TO WIN
1) Please copy over your Microsoft technical solutions and revelations to
TechNet Wiki.
2) Add a link to it on
THIS WIKI COMPETITION PAGE (so we know you've contributed)
3) Every month, we will highlight your contributions, and select a "Guru of the Month" in each technology.
If you win, we will sing your praises in blogs and forums, similar to the
weekly contributor awards. Once "on our radar" and making your mark, you will probably be
interviewed for your greatness, and maybe eventually even invited into other inner TechNet/MSDN circles!
Winning this award in your favoured technology will help us learn the active members in each community.
Feel free to ask any questions below.
More about TechNet Guru Awards
Thanks in advance!
Pete Laker
#PEJL
Got any nice code? If you invest time in coding an elegant, novel or impressive answer on MSDN forums, why not copy it over to
TechNet Wiki, for future generations to benefit from! You'll never get archived again, and
you could win weekly awards!
Have you got what it takes o become this month's
TechNet Technical Guru? Join a long list of well known community big hitters, show your knowledge and prowess in your favoured technologies!

4 articles so far:
VariableSizedWrapGrid by
Tom Mohan
Implementing media stream sources in Windows Phone Runtime for background audio tasks by
mcosmin
Windows Phone 8.1: Sqlite (part two) by
Carmelo La Monica
Making a Windows Phone App to read TechNet profile through JSON by
Emiliano Musso
And 2 more days to go!
Ed Price, Azure & Power BI Customer Program Manager (Blog,
Small Basic,
Wiki Ninjas,
Wiki)
Answer an interesting question?
Create a wiki article about it!

N95: Unintentional cancelling of inbound calls

Even tho the phone has been previously locked, when an inbound call occurs retrieving of phone from pocket more likely than not results in the cancel key being touched and the call goes to voice mail. Is there anyway for the N95 to be set such that the slide needs to be open to activate talk or cancel?

It is the worst at my house (town population is 10,000,) but I've recently noticed a huge deficiency in signal strength in other areas that used to get signal as well. I regularly drive 90 miles round trip for work inside a Verizon 3G map. I get data, but little to no phone signal. In a lot of areas I get as high as 3 bars, but it's unstable. The other day I drove another 50 miles away from that 90 mile route en route to a 100,000 population city (to visit a Verizon store) and completely lost phone signal just 15 miles before the city. The Verizon reps told me that the bars mean nothing (????)
The first week I had the phone, I was on vacation in a major vacation area 4 hours from home and I got 4G LTE and 5 bars. Since then I can still get 4G from time to time, and 3G pretty consistently, but the signal only improves sporadically in tiny patches.
With the way some people are responding, I really just think this phone has a weak antenna. People in larger cities have no problem whatsoever, and that would make sense if they have radio towers all around them. More power to ya.

Does Verizon ever provide a different model phone if the customer has basically had the same issues with 3 prior 'replacemet' (refurbished) phones?

I have owned a Samsung Galaxy Stellar for the about the past year and a half, which is only my second smartphone. I am not a whiz at all this but I'll try to be coherent. I had problems with the Stellar from the beginning: Very slow loading browser, problems with the cursor, etc. After about 6 months, the phone dropped, and no, I didn't throw it on the ground!
I have insurance and it was still under warranty, so it was replaced, by Assurian, I believe. The replacement phone had the same problems, plus a whole lot more. During calls, the wifi, and/or Bluetooth options would appear, or the phone would suddenly go on mute. In addition, when I tried to access my voicemail, what I heard was my own voice and outgoing message, not the one from Verizon asking for the password. These problems were intermittent, which made the Verizon employees dubious, but it's like the car that you take to the garage that suddenly works fine. Anyway, there were some other problems too, so I got a replacement phone again, which is the phone I currently have had for about 3 months. A few days ago it went from bad to worse. In fact it went Crazy!: Every call I make or receive is immediately dropped. Maybe after 5 or 6 tries, I can complete a call, but rarely. When I do, the mute and speaker options spontaneously activate, at the same time!! When I go into my voicemail, the messages are deleted in rapid fashion, one after the other, and I cannot get them back. Or, as I said earlier, the Wifi/Bluetooth screens appear, and it's difficult to punch in any numbers as I have to hit the back arrow many times. Strangely, the phone makes odd sounds: It buzzes or makes this odd chiming sound! If I didn't know better, I would think that I have finally lost my mind! I could go on but you have the gist. The phone is simply not workable. I phoned tech support, and she was very nice. After an hour on the phone, it worked ok, until the following day. She didn't do a factory reset, but she had me take the sim card and battery out. She did things on her end, which unfortunately I don't recall, but the phone worked ok until the following day, when it went crazy again.
I took it to the corporate Verizon store where I live, The guy said "It's a lousy phone, a cheap, bottom of the line phone." By the way, throughout this time, I had had about 6 hours with tech support, between this phone and the last one.
THIS IS MY QUESTION: I asked him if I could have a totally different phone, since this model is clearly defective. He said no, but they could send me another replacement. He told me to call trech support while I was there in the store and ask them, because they don't do repairs at the store. The tech on the phone told me the issue is with my Gmail account! That there is a virus on some phones and each time I get a replacement phone, because I have kept the same Gmail account, the virus keeps getting 'transferred', for lack of a better word, to the next phone. I was totally incredulous. Virus? She said, "Well, I use the term loosely, but it's just a weird glitch.When you get a replacement phone, bring it back and we'll save and upload all your data, and set you up with a new email account." I was confused and annoyed, as I had never heard of this, and felt I was getting the runaround. I asked her if they could give me a different phone (free of charge) and of course the answer was no. By the way, I should mention that the Stellar is no longer made. These are my options, according to the 3 different Verizon employees I spoke with: I am eliblele for the early upgrade which they call the Edge. From what I understand, it's the full retail price paid out over 2 years, with a partial payment made at time of purchase. One person told me that after 24 months, they would accept what I paid as payment in full? Sounds too generous. Option 2 is $50 of a new phone, and option 3 is to buy a new phone at a Verizon store that is having an android sale. So, I acquiesced to getting another replacement which I will keep until I buy a new totally different phone. My impression is that it's not like buying a bad toaster. They don't refund your money and let you get whatever you want for the same price! My question is this: Does Verizon ever just replace a phone that has had problems, with a totally different model? I have made as much of a stink as I can muster towards that end, but I am wondering if anyone out there has actually been able to pull that off?
Thank you for any feedback ,comments or stories!

amysue, We defintely want you to have a reliable and working phone. Our apologies that you have had issues with the current model, the Galaxy Stellar. After reviewing information about the overall function of the phone, it does not appear that Samsung has recalled the device or stated that all Stellar devices are defective, with that being said, the warranty would still only cover the same make and model. The only time a completely different phone is sent out is if the manufacturer deems the entire make and model overall faulty. It is common to have a few glitches and a master/factory reset, in addition to all other troubleshooting, will help resolve these issues. The Stellar is no longer made because there have been several Samsung galalxy devices launched, and this is common with any device manufacturer. Our recommendation is to take advantage of EDGE, if you are seeking a new device with low monthly payments. This gives you the chance to explore different device options without having a contract and you can EDGE up to a new device once meeting certain requirements. We hope to resolve your concerns here or by calling customer support.
sheritah_vzw
Follow us on Twitter
@VZWSupport

Anyone with more than one iPhone 6/6+ in same order getting there phones shipped if all your phones didn't have 9-19 when you ordered?

Our Verizon account has 10 lines and I figure we're paying over $7,000 a year, when I think of how much money total we have payed to Verizon only to be jerked around and around and lied too over and over again really does make me sick. 6 of these contracts have ended and 3 will be up in next couple months and 1 has a year left so the cancelation fees would not be that bad. And with the other big carrier I've heard it might be cheaper on monthly service. All I wanted from Verizon was for them to do whats right.
I Ordered
iPhone 6 16gb gray
iPhone 6+ 16gb gray
iPhone 6+ 64gb gray
iPhone 6+ 64gb silver
all on the same order. I finished at 3:19 am est and got a date of 10/14 even though all the phones except the 6+ 16 gb gray had 9/19. Got confirmation email at 4:56 will ship by 10/14 I got worried that all the phones would not ship till 10/14 and contacted verizon thru facebook messenger. They told me my phones would ship in the order received and not be held up by a phone that wasn't available in my order. And based on the time of my order she said 9/19 for the 6 and 6+ silver, 10/7 for the 6+ 64 gray , 10/14 for 6+ 16 gray. On Monday morning my status changed to 9/19:):) in the afternoon in changed to unknown. I called 611 and rep went thru all my phones with a time sheet she had and said i should get all but the 6+ 16 gray on 9/19, she said that one you had to order by 3:00 to get on 9/19. On Wednesday my status changed to 10/14 , called 611 again and this lady told me all my phones had 10/14 listed after them. She told me she didn't know what to tell me that Apple ships the phones and its out of Verizon's hands because they don't have the phones. then she told me to call Apple (and gave me the phone # ) and see if they ship preorders with more than 1 in a order when their available or wait till all are. I called them ( they laughed that Verizon had me call them) and they don't hold up orders . Called customer service back and guy said at least 10 times ....I ASSURE YOU VERIZON WILL NOT HOLD YOUR PHONES!!! i said of course they're not actually putting them in a box and waiting for all, they're sending them to other people who ordered after me. I asked him if my order could be separated/ rebuilt and do a (jump the line request) so i could get my phones when i should. He said there is no such thing at verizon....he has worked there many years and if there was he would know. Someone posted # to Internet orders so i called them Thursday morning, spoke to a very nice guy he said my phones that i should get i would and i should get an e-mail later that day and if i didnt get anything by 8:00 pm to call back. Before we hung up i asked if I didn't get anything did he know if they could cancel/separate/rebuild and do jump the line, he said they can do that and put me on hold while he spoke with a supervisor, he came back and said if nothing happened that day they would do that with my order. I got nothing, called Internet orders back at 8:30pm... went thru my history and asked them to do the rebuild. She transferred me to supervisor who REFUSED to rebuild my order, that is only for orders that have a technical error. She was also the first person from Verizon to tell me that they DO NOT ship orders in multiple shipments, they will only send when everything is available. She then said your order was given a delivery date of before 10/14 and that's when you'll get all your phones. I let her know that there is nothing about that confirmation that tells me that the phones that I ordered that had 9/19 deliver by dates would not be delivered then, 9/19 is before 10/14.

Same thing happened to me!!! They made a shady business move and they should be ashamed. Placed a pre-order for an Phone 6 and an iPhone 6 Plus at 2 AM on the 12th and got my pre-order in line just like everyone else did that morning. The 6 said delivery by 9/19 and the Plus was already back ordered to 10/7 but that's fine, I expected the Plus to be harder to get anyway. Being that both phones were eligible it made sense to just place one order given this hasn't been an issue in the past. However, Verizon moved my iPhone 6 pre-order delivery to coincide with the back ordered Plus so they don't have to ship each phone separately!!! I have to wait for something on backorder while the other is ready so they can save on shipping cost. I expected the one that I pre-ordered IN TIME FOR A 9/19 delivery and waited my turn "in (on)line" like everyone else I should get that when it told me that in the checkout, THEN send the Plus when it becomes available. I even have the confirmation email that says "Deliver by 9/19"!!! Every company you order from sends you the backorder item when it becomes in stock, they don't wait and hold the entire order for it. WHAT A BUNCH OF CRAP!!!

I'm unable to accept inbound calls on my iPhone 5 for a holden commodore VE - 2012 model - any ideas on how to resolve?

How do I resolve the issue for answering inbound calls on my iPhone 5 when connected to Bluetooth in a holden commodore VE - 2012 model. Outbound calls connect ok.

I'm having the same problem with a 2013 GMC terrain. I don't know if the problem is the car or the iPhone 5. I have been seeing this problem more and more on threads. Can anyone help us with this? Is there any info online from Apple re: new updates that would solve this problem?

Ipad shows all regular Iphone inbound calls as Facetime. I only want true FT calls to appear. I switch audio/video and it still happens. How can I set the Ipad to only register true facetime calls rather than all inbound regular calls? thanks

My Ipad will show all regular inbound calls, from Iphone, as Facetime calls. I would like only TRUE facetime calls to appear. I have switched audio/video on Ipad but it still happens. How can I set the Ipad to only register only true FT calls rather than all inbound calls that a re not facetime calls? Yes, you may have to reread this twice and slowly to understand..... Thanks!

Hi webn,
I understand that you do not wish to see phone calls on your iPad anymore. I have an article for you with some information on accomplishing this goal:
Connect your iPhone, iPad, iPod touch, and Mac using Continuity - Apple Support
https://support.apple.com/en-us/HT6337
Turn off iPhone cellular calls
To turn off iPhone cellular calls on your iPad or iPod touch, go to Settings > FaceTime and turn off iPhone Cellular Calls.
On your Mac, open the FaceTime app and go to FaceTime > Preferences. Click Settings and deselect the iPhone Cellular Calls option.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

The inbound calls to our call center is drop after putting it on hold or transfer

Dear All;
Good day
The inbound calls to our call center is drop after putting it on hold or transfer the call to another agent. The MOH file is playing till 21 sec only then call drop . the agent cant resume the call again. The MOH file is running from Gateway (multicast).
No problem in outbound calls.
I urgent need you help
Should you require any more information , please do not hesitate to contact me.
Thanks & Best Regards,
Muhammad Fathy,
IT Network Manager
ALEXBANK
A subsidiary of Intesa Sanpaolo Group
Head office: B210-F1, Smart Village , KM 28 Cairo-Alex Desert Road, Egypt.
Cell:      +201017288844.
Office: +202-35311300   Ext: 8090.
eMail:   [email protected]
i To maintain a paperless environment, please don't print this e-mail unless you really need to.

Typically you have a codec or media resource issue to track down. IE, MTP, region, location, gateway trunk to trunk to call or something in that area.   Bypass UCCX and do the same call without this app... does it happen with a normal call?

Debugging inbound call - need debug command

I am debugging what I believe to be a dial plan issue on PGW but want to run a debug command on the ITP to show the actual called number of the inbound call.
What is the best debug command to use to see the inbound called and calling numbers of a call.

You are better off capturing an mdl trace from the PGW using per call tracing or using snoop and opening the call in Wireshark.
The ITP will only dump hex values and you will need to decode them yourself since it is not concerned with ISUP layer. You can use the cs7 paklog feature to attach an access list to a linkset and then send the raw data to a syslog server for decoding.
For example:
cs7 paklog x.x.x.x dest-port xxxx src-port yyyy
access-list 2700 instance x permit si all
debug cs7 mtp3 paklog 2700

Decode not called for all UIComponents in tree

Many of the faces .jsp pages I have been working with in EA2 have not been updating their models properly.
The symptom I have observed is that the decode method is not called for all of the UIComponents on the page.
I think I have tracked this down to a bug in the class com.sun.faces.tree.TreeNavigatorImpl. This class appears to be used internally by some of the .jsf code to navigate the component tree.
Studying various stack traces, it looks like the method TreeNavigatorImpl.getNextStart() is supposed to provide a preorder traversal of the component tree. Starting from the root of the tree, each call is expected to return the next node. Experimental evidence suggests that it is not doing that properly, and it fails to visit all the nodes in the tree.
For example, if my component tree looks like this (this is a representation of the tree; not an example of a .jsp page):
<node id = "/">
   <node id = "page">
      <node id = "carStoreForm">
         <node id = "ba0">
             <node id = "ba1">
                 <node id = "ba3"/>
                 <node id = "br4"/>
             </node>
         </node>
         <node id = "bold1"/>
         <node id = "more1"/>
      </node>
   </node>
</node>A preorder traversal of these nodes should visit nodes:
'/page'
'/page/carStoreForm'
'/page/carStoreForm/ba0'
'/page/carStoreForm/ba0/ba1'
'/page/carStoreForm/ba0/ba1/ba3'
'/page/carStoreForm/ba0/ba1/br4'
'/page/carStoreForm/bold1'
'/page/carStoreForm/more1'
However, when I write test code that calls TreeNavigatorImpl.getNextStart() directly, only the following nodes are returned:
'/page'
'/page/carStoreForm'
'/page/carStoreForm/ba0'
'/page/carStoreForm/ba0/ba1'
'/page/carStoreForm/ba0/ba1/ba3'
'/page/carStoreForm/ba0/ba1/br4'
It looks to me like the method loses track of the state of the traversal, and prematurely returns null before all the nodes are visited. (It is failing to return the "bold1" and "more1" nodes.)
This is all extremely speculative. Without jsf source or doc for any of the tree classes, it is difficult to know what is supposed to be going on. And, of course, I may just have a bug in my code.

Okay, rather than wait for Max to respond, I decompiled the TreeNavigatorImpl class myself and studied the source code. The
problem arises in the getNextStart() method. If the method returns
a null value, then presumably the class has successfully traversed
the entire tree in preorder. Unfortunately, there was a slight
logic error that would halt traversal after you got to the last node
of the last subtree at the beginning of your travels.
The following code should correct this situation (let me know if I've
introduced any new problems into the mix...). I tested this out using the simple example that Max describes above. The test code appears at the end of my revised method:
public UIComponent getNextStart() {
UIComponent cur = null;
if (startTraversalDone) {
return cur;
if (startStack.empty()) {
cur = root;
Iterator iter = cur.getChildren();
if (iter.hasNext()) {
startStack.push(iter);
else {
while (!startStack.empty()) {
     Iterator iter = (Iterator) startStack.peek();
     if (iter != null && iter.hasNext()) {
     cur = (UIComponent) iter.next();
     Iterator childIter = cur.getChildren();
     if (childIter != null && childIter.hasNext()) {
     startStack.push(childIter);
     else {
     if (!iter.hasNext()) {
     startStack.pop();
     break;
else {
     startStack.pop();
if (startStack.empty()) {
startTraversalDone = true;
if (cur != null) {
endStack.push(cur);
return cur;
     public static void main(String[] args) {
          MyComp root = new MyComp("root");
          // build tree....
          MyComp page = new MyComp("page");
          root.addChild(page);
          MyComp csf = new MyComp("csf");
          page.addChild(csf);
          MyComp ba0 = new MyComp("ba0");
          csf.addChild(ba0);
          csf.addChild(new MyComp("bold1"));
          csf.addChild(new MyComp("more1"));
          MyComp ba1 = new MyComp("ba1");
          ba0.addChild(ba1);
          ba1.addChild(new MyComp("ba3"));
          ba1.addChild(new MyComp("ba4"));
          MyTreeNavigator nav = new MyTreeNavigator(root);
          MyComp comp = null;
          while ((comp = (MyComp) nav.getNextStart()) != null) {
               System.out.println(comp.getComponentId());
public class MyComp extends UIComponentBase {
     public MyComp(String id) {
          this.setComponentId(id);
     public String getComponentType() {
          return "MyComp";

Blocking inbound call in CM with MGCP Voice gateways

I'm sure someone has posted on this: We have MGCP voicegateways and CM 4.02aSR2b. How can I setup CM to block a specific inbound call? If the gateways were H323 then no problem, but with MGCP we are stumped. Any suggestions? Thx!

It cannot be done with MGCP. It can be done with H.323 using reject translation rules on the GW.
With MGCP your only option is to route all calls via Unity or IPCC first where logic can be build to block calls.
HTH, please rate posts!
Chris

1.41 SR1 - Inbound calls to all model phones ring only 1 time

Similar Messages

Maybe you are looking for