1 material - 2 accounts

Hi gurus,
I have a problem:
When I create 1 material code in MM01, I have to assign it to "trading goods" or "raw material", and system will assign it to suitable account.
But I have a material (for example: screw), when I sell to customer, it is trading goods and assign to 1 account (for example: 100xxx).
And when I put it in production (for example: bike production), it is raw material and assign to other account (for example: 111xxx).
Could I split 1 material code into 2 different accounts like that?
If yes, how will I do??
Thanks you!

Its not always that a material belonging to material type is assigned to just one G/L, G/Ls are assigned to valuation class, may be in your case your material type is configured with just one valuation class.
For your requirement to get fulfilled, you need to create another valuation class, then assign different G/L to that valuation class, and then assign that valuation class to your material in ACCOUNTING 1 view of material master, this way your new material will get hit to the different G/L account, same way can be applied if different G/Ls are required for different materials.

Similar Messages

  • Report for Material and accounting document

    Hi all,
        Is there any report to show the fields as listed below:
    Mvt type         Material Doc        Accounting doc   Posting date   Quantity         Ammount 
    thanks & regards
    Chaitanya

    hi,
    You can check with the many reports like MB5B, MB51 etc...as suggested above...
    But along with this you can check the table also like MSEG for your requirement... and MKPF for the material document...
    Pls check ...
    Hope it helps...
    Regards
    Priyanka.P

  • GR/IR & Material GL accounts for 3 way match

    Hi All Experts,
    I have requirement where I have to configure the 3 way match scenario. For that I have to create material ( Stock) account, GR/IR account.
    I have some doubts regarding this if I get experts guidance it will be great help for me.
    Material Account
    1 ) Material as a P & L OR Balance Sheet account ?
    2 ) Reconciliation with material ? ( On control data tab in FS00 ! )
    3 ) Line item ticked ? and Open Item ticked ?
    4 ) Whether to define as cost element or not ?
    GR/IR Account
    1 ) GR/ IR account as a P & L OR Balance Sheet account ?
    2 ) Reconciliation with material ? ( On control data tab in FS00 ! )
    3 ) Line item ticked ? and Open Item ticked ?
    4 ) Whether to define as cost element or not ?
    and anything configuration point which I have missed can have guidance over that will be helpful.
    Regards,
    Sharvari Joshi.

    Hi,
    Material Account - Hope this is a stock A/c
    1 ) Material as a P & L OR Balance Sheet account - B/S A/c
    2 ) Reconciliation with material ? ( On control data tab in FS00 ! ) - No reconciliation type
    3 ) Line item ticked ? and Open Item ticked ? - Only line item display
    4 ) Whether to define as cost element or not ? - Not a cost element
    GR/IR Account
    1 ) GR/ IR account as a P & L OR Balance Sheet account ? - B/S
    2 ) Reconciliation with material ? ( On control data tab in FS00 ! ) - No reconciliation type
    3 ) Line item ticked ? and Open Item ticked ? - activate both
    4 ) Whether to define as cost element or not ? - Not a cost element
    You might need to check the config in OMR6.
    Regards
    SM

  • How to Assignment between Material and Account Assignment Group

    Hi,
    When we are creating a sales order with material ABCD, then in material line item -->under Billing Document Tab --> in Accounting screen, there is field Acct asgnmt grp (Account Assignment Group).
    From where we can assign between Material and Account Assignment Group, after that it automatically pick in sales order creation.
    Please guide..

    Please refere to below link it may help.
    Re: how to configure new account assignment group of material
    Thanks Dev.

  • Material doc, accounting doc, and profit center doc in vl03n

    Hi All,
    In VL03N how can i see Material doc, Accounting doc, and Profit Center doc.
    thanks in advance,
    kumar.

    yes he meant the exact same thing which you have understood my friend, you can have any sales document number with you f& rom that you can trace all the documents relavant to that, say you have inquiry which lead to quotation then to order, delivery, invoice & finally the accounting document so by simply entering VA13 you will get the inquiry display screen where you enter your inquiry number & click on the document flow, you will get all the details which i just mentioned, double click on the particular document number which you want to see in details
    Reward Points if it helps
    Regards,
    N

  • Tutor Material for Account Receivable

    Please help with Tutor Material ( study material) for account Receivable. I preparing to study this module but i do not have a study material. If someone has this material or know were i can download please share.

    Hi,
    It depends what type of information you are after. You can download the Oracle E-Business suite documentation CD from Metalink (or view the library online). In there you will find the Receivables User Guide, Tax manual and API reference guides amongst others (eg. Vertex Integration Guide).
    Outside of the standard product docs, there are several books out there, such as the Financials Handbook (McGraw-Hill) that contain good sources of information for the core financials modules.

  • Where to check the Material distribution Accounts in OPM inventory

    Hi,
    I have created a Purchase Order for OPM item and received the Item through Receipts window in Inventory module. I cannot view the transaction details and costing details in the material transactions window in Inventory responsibility. Where can I see the Material distribution accounts for this item. Can any one help me out in this issue....
    Thanks

    Thanks Venu for immediate reply,
    I saw the BAPI and unable to figure out what paramters I should fill.
    Plant, Material and Quantity I know. But rest of them like
    Check Rule, STGE_LOC, batch, Doc_number, WBS_ELEM, STOCK_IND,
    DEC_FOR_ROUNDING, DEC_FOR_ROUNDING_X, READ_ATP_LOCK, READ_ATP_LOC_X & MATERIAL_EVG.
    In  the BAPI documentation I dint find how to fill these paramters. Can you help me with hat I need to fill in the input paramters.
    Regards,
    Jessica Sam

  • Material ledger accounts range

    Dear Experts
    can you please explain ,
    1]What is " Material ledger accounts Range " were it is created ,
    2] what is its use
    3]How to run material ledger
    regards
    bhaskar

    Hi,
    Material Ledger is created to follow the transaction posted through various movement types and check for any price changes.
    The configuration for Material Ledger is done in Controlling > Product Cost Controlling > Actual Costing/material ledger.
    The number ranges for material documents are based on the nature of transactions and transaction groups.
    You have to create the Material ledger documents under document type ML and for passing on the entries to accounting
    use document type 47.  Material price valuation is a periodic activity done through CKMF and CKMH.  You have the
    analysis of the material prices through CKM3.
    Regards,
    Sadashivan

  • In MIGO two seperate entry for the same Material in Accounting Document

    Dear Expert,
    Hi
    Business is doing stock transfer transaction. Here with reference to stock transfer PO when business is doing Goods Issue.
    here there is two stock transfer PO.  in one PO there is two line items for the same material. in the second PO again same material with two line items.
    but at the tme of Goods issue it is showing two seperate line for same material stock account credit in accounting document. but in the other Goods issue with reference to second PO it is showing only one line for inventory account credit in the accounting dcoument.
    so pl. guide me on this.
    thanks
    H shah

    Hi,
    Step 1 : First we create the Stock transfer PO.
    Step 2 : Goods issue with ref to above stock transfer PO ( Movement type 351) - MIGO
    Step 3 : Goods Receipt with ref to above stock transfer PO ( Movement Type 101 )- MIGO
    Thanks
    H shah

  • Material without Accounting views

    Hi,
    I created a new material without Accounting views and I assigned its material group to a valuation class in Tcode OMQW (and in OBYC I assigned the appropriate account to this valuation class)
    Then I tried to create a PO with this material, the problem that is the system didn't determine the GL account automatically      even though that the material group of the material is assigned to a valuation class
    Please how to solve this ? must I create Accounting views for this material even that I worked with material group ?
    Regards.

    Hi
    The purpose of Accountin views is not just to provide GL for accounting purposes, but also update the stock and its value upon GR
    So, you would need to have Accounting views for sure...
    Regards
    Ajay M

  • Material without accounting view.

    Hi gurus,
        are there any ways to transfer PR containing materials without accouting view from R/3 to SRM ? because we found it is impossible in standard system.
       otherwise, are there any solutions to avoid that for new created material , the accountant has not  maintained the  accouning view before the PR to be transferred for bidding in SRM?
       How you guys doing in your senario? thank you in advance.

    Hi Wang,
    Yeah its true that the transfer of PR fails containing materials without accounting view maintained even though you have Account assignment.
    But the free text P.Rs with accounting view maintained (cost center, WBS, Asset etc) will get transferred to SRM.
    I think its the standard behaviour. Recommend you to raise this issue with SAP.
    Do let us know about further developments.
    Rgds,
    Teja

  • Additive costs getting added to  raw material consumption account

    Hi,
    when i run ck11n , the additive costs are getting added to raw material consumption account, how can i split them .please advice
    Thanks

    Check the cost elements in OKTZ.
    If there is any surcharge applicable on that material, we use CK74 to add "Additive Cost". When you run the CK11N, it shows separately in the last with separate cost element with values updated in CK74.
    You might have assigned the Material consumption cost elemtn in CK74. Just check it
    Hope this helps
    Thanks

  • Material Inspection Account

    Is it mandatory at the time of period closing Material Inspection Account should be Zero or not. If YES or NO than please give the case.
    Regards
    Ajay

    Hi,
    The std design is that consumption stock is considered to be consumed once GRed. Instead of 'P' why don't you use 'Q' stock ?
    Later you will be able to issue this stock to WBS element.
    As Gajesh said pl raise this issue with SAP.
    Rgds

  • Material document & Accounting document

    Hi Friends,
    Please explain me difference between Material document & Accounting document.
    Vipul.

    Hi Vipul,
    Material document
    In the Inventory Management system, when a goods movement is posted, a material document is generated that serves as proof of the movement and as a source of information for any applications that follow.
    A material document consists of a header and at least one item. The header contains general data about the movement (for example, its date). Each item describes one movement.
    Accounting document
    If the movement is relevant for Financial Accounting (that is, if it leads to an update of the G/L accounts), an accounting document is created parallel to the material document.
    In some cases, several accounting documents are created for a single material document. This might be the case, for example, if you have two material document items with different plants that belong to different company codes.
    The G/L accounts involved in a goods movement are updated through an automatic account assignment.
    For goods receipts for purchase orders, goods movements for stock transport orders and consignment withdrawals, business partners may have different local currencies. Therefore, as well as the local currency, the accounting document must also contain another currency for processing and postings. For this purpose, accounting documents created as a result of these goods movements will automatically be managed in the local currency and in the document currency. You can switch between both currencies by choosing Settings ® Currency display.
    Regards,
    Raja.

  • Material for Accounts Payable

    Hi Friends,
      In FI module am planning to study Accounts payable in specific.Can anyone please tell me some good materials regarding this topic.

    Hi,
    Check these links
    http://www.thespot4sap.com/IntroTo/SAP_FI_Module_Introduction.asp
    http://www.thespot4sap.com/IntroTo/SAP_CO_Module_Introduction.asp
    http://academic.uofs.edu/faculty/gramborw/sap/sapguide.htm
    http://help.sap.com/saphelp_40b/helpdata/en/e1/8e51341a06084de10000009b38f83b/applet.htm
    http://www.sapgenie.com/sapfunc/fi.htm
    http://www.sapgenie.com/sapfunc/fi.htm
    http://www.sap-basis-abap.com/sapfi.htm
    http://www.sap-basis-abap.com/sapfiar.htm
    http://www.sap-basis-abap.com/sapco.htm
    Check this thread, you have few more links
    FI module(General Ledger) business documentation- any material?
    Regards,
    Satish

Maybe you are looking for