1 pass VBR vs 2 pass VBR

What's the difference? Trying to figure out some settings for this project, but not sure which one to choose. Any help is appreciated!

The difference, in essence, is speed and accuracy.
With one pass encodes, the encoder will move through the material just once examining the motion and estimating the best encode rate for each particular section, and for the settings you have put in place. It estimates, encodes and moves on.
With two pass encoding, the first pass is used to analyse the motion and the second is the encoding - this is why the second pass takes so much longer. It is largely more accurate as it establishes the best encode for each section and then applies that on the second pass.
Cinemacraft does multi-pass encoding, with each sweep refining the analysis made on the previous pass. Such a technique realy helps get the very best from the footage and this is why Cinemacraft is so highly thought of.
However, the draw back is the time it takes... 2 pass takes longer than one pass, although the quality you get for the same (or similar) resulting file size, is better.

Similar Messages

Confused about passing by reference and passing by valule

Hi,
I am confuse about passing by reference and passing by value. I though objects are always passed by reference. But I find out that its true for java.sql.PreparedStatement but not for java.lang.String. How come when both are objects?
Thanks

Hi,
I am confuse about passing by reference and passing
by value. I though objects are always passed by
reference. But I find out that its true for
java.sql.PreparedStatement but not for
java.lang.String. How come when both are objects?
ThanksPass by value implies that the actual parameter is copied and that copy is used as the formal parameter (that is, the method is operating on a copy of what was passed in)
Pass by reference means that the actual parameter is the formal parameter (that is, the method is operating on the thing which is passed in).
In Java, you never, ever deal with objects - only references to objects. And Java always, always makes a copy of the actual parameter and uses that as the formal parameter, so Java is always, always pass by value using the standard definition of the term. However, since manipulating an object's state via any reference that refers to that object produces the same effect, changes to the object's state via the copied reference are visible to the calling code, which is what leads some folk to think of java as passing objects by reference, even though a) java doesn't pass objects at all and b) java doesn't do pass by reference. It passes object references by value.
I've no idea what you're talking about wrt PreparedStatement, but String is immutable, so you can't change its state at all, so maybe that's what's tripping you up?
Good Luck
Lee
PS: I will venture a guess that this is the 3rd reply. Let's see...
Ok, second. Close enough.
Yeah, good on yer mlk, At least I beat Jos.
Message was edited by:
tsith

Java is pass by value or pass by refrence

Can any one explain whetherjava is pass by value or pass by refrence.

Everything in Java is passed "by value". Everything.
Pass-by-value
- When an argument is passed to a function, the invoked function gets a copy of the original value.
- The local variable inside the method declaration is not connected to the caller's argument; any changes made to the values of the local variables inside the body of the method will have no effect on the values of the arguments in the method call.
- If the copied value in the local variable happens to be a reference (or "pointer") to an object, the variable can be used to modify the object to which the reference points.
Some people will say incorrectly that objects are passed "by reference." In programming language design, the term pass by reference properly means that when an argument is passed to a function, the invoked function gets a reference to the original value, not a copy of its value. If the function modifies its parameter, the value in the calling code will be changed because the argument and parameter use the same slot in memory.... The Java programming language does not pass objects by reference; it passes object references by value. Because two copies of the same reference refer to the same actual object, changes made through one reference variable are visible through the other. There is exactly one parameter passing mode -- pass by value -- and that helps keep things simple.
-- James Gosling, et al., The Java Programming Language, 4th Edition
[Pass-by-Value Please (Cup Size continued)|http://www.javaranch.com/campfire/StoryPassBy.jsp]

Package is working but not passing parameter it is passing default value

The problem now is that the argument (P_ATS_NO) is being pass as the default 0 instead of the number
I am passing in. Did I do something wrong with the argument?
I am using the following to call the package
declare
begin
MYTEST.A411APPROVALEMAIL_PKG.A411APPROVALEMAIL_async(:P_test);
end;
:P_test is being set to 1204 but I am getting 0
THE PACKAGE
create or replace PACKAGE BODY A411APPROVALEMAIL_PKG
AS
PROCEDURE A411APPROVALEMAIL_async (P_ATS_NO NUMBER)
AS
BEGIN
DBMS_SCHEDULER.define_program_argument (program_name => 'A411APPROVALEMAIL',
argument_position => 1,
argument_name          => 'P_ATS_NO',
argument_type          => 'NUMBER'
*,DEFAULT_VALUE => 0);*
DBMS_SCHEDULER.ENABLE (NAME => 'A411APPROVALEMAIL');
DBMS_SCHEDULER.create_job (job_name => 'EMAIL411'
|| P_ATS_NO,
program_name => 'A411APPROVALEMAIL',
enabled => TRUE,
comments => 'Comments'
EXCEPTION
     WHEN NO_DATA_FOUND THEN
     null;
END A411APPROVALEMAIL_async;
PROCEDURE "A411APPROVALEMAIL" (P_ATS_NO NUMBER)
as
strSubject varchar2(200) := ' NOTIFICATION';
strPtext varchar2(100) := ' ';
strEmail varchar2(100) :=’[email protected]';
strFromEmail varchar2(100) := 'MYTEST.AOL.COM'; --'' ; --
strBody varchar2(4000) := P_ATS_NO;
emailSentFlag varchar2(3) := 'NO';
strDistrict varchar2(240);
strAshManager varchar2(60);
myDocTypeID number;
lno varchar2(50);
begin
ash_email(strEmail,strFromEmail,'MY strSubject',' ',strBody,'170.208.17.13',25);
end A411APPROVALEMAIL;
end A411APPROVALEMAIL_PKG;
Howard

If I have define it using DBMS_SCHEDULER.define_program_argument
why do I have to do DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE.
Using this:
DBMS_SCHEDULER.SET_JOB_ARGUMENT_VALUE (
job_name IN VARCHAR2,
argument_name IN VARCHAR2,
argument_value IN VARCHAR2);
I am getting
Error at line 13: PLS-00103: Encountered the symbol "VARCHAR2" when expecting one of the following:
The symbol "(" was substituted for "VARCHAR2" to continue.
1. create or replace PACKAGE BODY A411APPROVALEMAIL_PKG
2. AS
3. PROCEDURE A411APPROVALEMAIL_async (P_ATS_NO NUMBER)
Also when I do the following isnt this setting the value
declare
begin
MYTEST.A411APPROVALEMAIL_PKG.A411APPROVALEMAIL_async*(:P_test);*
end
Howard
Edited by: csphard on Feb 26, 2010 2:50 PM
Edited by: csphard on Feb 26, 2010 3:06 PM

7 Pass erase vs 3 Pass vs Zero erase

I want to start afresh on my HD, i.e. reinstall from original disks and use Disk Utility to secure erase (via Erase & Install).
I've read articles about pros and cons + how to do it. So I think I know how to do everything. However, from my reading I gather that Zero Erase is a single pass random erase whereas 7 Pass is secure erase (and there is a 3 Pass secure erase option nowadays)?
That got me wondering - does 7 Pass secure erase make 7 x single passes over the entire disk? If it does, then when the blue bar has extended a bit over a third of the way across the progress monitor (that little bar that indicates time left) it should have made 3 passes, which would be equivalent to 3 pass secure erase?
Is that an option?
Is it possible to stop part way through an erase (which is part of E & I)?
My original disks 1 and 2 have OS X 10.4, with OS X 10.5 included as complimentary 3rd disk (because OS X 10.5 was just released at that time).
I gather I need to erase with disk 1, then install disks 1 + 2, then install OS X 10.5.

Thanks for that info Thomas.
The malware:
If there was something on my computer it got there by drive-by method. I am super, super cautious. I never respond to popup prompts. If there isn't facility to click to get rid of the popup I leave the page, and I never, ever put password in. I'm unsure how long the malware might have been on my computer. The E&I has transformed my computer. There is so much difference it's a bit weird. Safari's predictive text is back, a grey bar along the bottom of Safari screen isn't there anymore (previously Safari pages didn't seem to fully load; there was a grey bar along the bottom of the page which described number of items loading, but there always seemed to be some items not loaded). Everything is much faster - loading files at startup, loading applications, opening web pages and files.
My first encounter with a suspicious popup was on friend's Facebook page in early April. That was the fake Flash Player prompt. My ISP usage stats for the next day indicate excessively large download (it far exceeds any previous single-day stat in last 4 years). I didn't do anything out of the ordinary online that day, so I suspect something not right there. During the next week Safari (which had been very stable) started to crash. Hmmm. Then the Software Update prompt - that was too devious for my comfort.
The problem is, Safari had been slow for a lot longer than just back to early April. The slow loading of files at startup + opening of apps predated April too, but perhaps only back as far as late last year. I think Safari might have lost the predictive text about the same time as the apps etc slowed, but Safari itself was slow - - - well, it seemed like forever (I put it down to Apple wanting people to upgrade to SL, so they made Safari craaaaawwwlll.) Well it doesn't crawl now.
In a recent blog Intego suggests poorly maintained self-hosted Wordpress blogs spread a lot of infected files (for readers who might not know the difference - some blogs run on downloaded Wordpress.org software which the blog owner needs to maintain, whereas the software that runs Wordpress.com blogs is maintained by Wordpress). I frequent a number of Wordpress self-hosted blogs, especially since late last year, but I haven't encountered any popup prompts like the Flash Player one at FB. So if I picked up anything from those sites it was a very stealthy drive-by attack.
After E&I I installed Intego VirusBarrier X6 for 30-day trial, and I'll probably keep it there permanently (i.e. purchase at end of 30 days). I know there are a couple of popular free AVs that a lot of people use, but on performance (i.e. finding malware asap) VB X6 seems to be the king of AV's for Mac. I ran full scan, to be sure all the files I brought back onto the system are clean, and nothing was detected.
The reinstall:
I install by dmg because I understand it to be a better way to install software updates. The gory details are lost to me now, but I remember I had trouble with an SU update a number of years ago and after a lot of reading, concluded the gold standard for updates is to have all ports empty, no applications open, and install from dmg (for Microsoft Office updates login with shift key down and restart after install). I plan to stick with the method because it has worked well for me. I work on the theory that if I put in the time to build a good foundation I'll be rewarded with a stable system. Reinstall was more complicated than it needed to be because SU doesn't clearly identify what needs to be installed.
Leopard DVD:
The Leopard DVD is upgrade only. I tried installing it first but got message that it could not install because OS X 10.4 was not on the drive. The Leopard DVD provided the first of a number of frustrations during reinstall (although this was a bit of a heart-stopper; I thought I'd totally stuffed up). I used Leopard DVD to boot system and access DU for secure erase. At the end of that process the next step is to install . . . oops (it won't install). I ended up in a no-win loop of asking to quit, but needing to nominate DVD to be used for restart; couldn't eject disc . . . around the loop I go again . . . Somehow I eventually got out of the pickle.
Zero erase:
It took around 40 mins for each erase (I had other things to do, so time wasn't a problem). I'm still interested to know the answer to my original question though. Does 7-pass write zeros across the drive seven consecutive times? I guess it must.
Browsers:
I've contemplated switching to another browser (I'm reluctant to use Chrome only because Google owns it, and I have no desire for Google to know more than it already does about me). Camino appealed but its future seems uncertain. Firefox is often recommended especially for the NoScript and AdBlocker features. VirusBarrier has Adblock feature, so I may not need that on a browser. For the time being I'll try running Safari with Java and JavaScript disabled. I've also deselected all versions of Java in Java Preferences in Application/Utilities and disabled Flash Player by moving three files in Library/Internet Plug-ins to a folder I named 'Internet Plug-ins (Disabled)'. When I want to use Flash Player I move the files back into their correct folder.
I know that JavaScript is not the same as Java but I gather Firefox's NoScript disables JavaScript. I haven't done a great deal of web surfing since making these changes but it's amazing how many pages work perfectly well with all these things disabled. Earlier today I checked four different bank web pages for current term deposit interest rates. Two needed JavaScript and two didn't. I left the Safari Preferences pane open and clicked JS on and off as I needed it.
There is a noticeable reduction in activity on Little Snitch.
I assumed Apple would never update Safari 5.0.6 (part of the unsupported flotsam and jetsam), and that Leopard users won't get access to newer versions. I assumed that when current version of Flash Player becomes obsolete Leopard users will need to download from Adobe, or move to Chrome.

HT1222 I downloaded ios 7.0.2 onto my i-pads at my home. I put in a pass code for the pass code lock, but would now like to remove it. When I go the general area on my i-pad settings it will not let me delete the pass code. I don't want the pass code p

I installed ios 7.0.2 on my i-pads and now want to delete the pass code, which I originally put in. I no longer want the hassle of the pass code, but cannot figure out how to delete it. I do not want the additional security.

Settings>General>Passcode Lock. Tap the arrow to the right on that line. Enter your Passcode. In the next window select Turn Passcode Off. Enter your passcode again to confirm.

Re : Returnable Gate Pass / Non-Returnable Gate Pass

Hi Everybody,
I have a buisness requirement, where we require :
1. Returnable Gate Pass ( like a job going for weighing and coming back)
2. Non-Returnable Gate Pass.
Can anybody explain me in detail the standard SAP process, which can be carried out for the same.
Please note that these are not for returnable packaging.
Thanx in Advance
Anand.B.K.

Hi,
Can you let me know in details how to go about with MvT : 541, and the form for the same, how to take printout.
Thanx for the help in Advance
Anand

Subroutine parameters ..by default pass by value or pass by ref

how parameters pass ? value or ref
if we use changing in both perform and form...will it become CALL BY REF?
Message was edited by:
balaji velpuri

Hi,
The Parameter Interface
The USING and CHANGING additions in the FORM statement define the formal parameters of a subroutine. The sequence of the additions is fixed. Each addition can be followed by a list of any number of formal parameters. When you call a subroutine, you must fill all formal parameters with the values from the actual parameters. At the end of the subroutine, the formal parameters are passed back to the corresponding actual parameters.
Within a subroutine, formal parameters behave like dynamic local data. You can use them in the same way as normal local data objects that you would declare with the DATA statement. They mask global data objects with the same name. The value of the parameters at the start of the subroutine is the value passed from the corresponding actual parameter.
Subroutines can have the following formal parameters:
Parameters Passed by Reference
You list these parameters after USING or CHANGING without the VALUE addition:
FORM <subr> USING ... <pi> [TYPE <t>|LIKE <f>] ...
CHANGING ... <pi> [TYPE <t>|LIKE <f>] ...
The formal parameter occupies no memory of its own. During a subroutine call, only the address of the actual parameter is transferred to the formal parameter. The subroutine works with the field from the calling program. If the value of the formal parameter changes, the contents of the actual parameter in the calling program also change.
For calling by reference, USING and CHANGING are equivalent. For documentation purposes, you should use USING for input parameters which are not changed in the subroutine, and CHANGING for output parameters which are changed in the subroutine.
To avoid the value of an actual parameter being changed automatically, you must pass it by value.
Input Parameters That Pass Values
You list these parameters after USING with the VALUE addition:
FORM <subr> USING ... VALUE(<pi>) [TYPE <t>|LIKE <f>] ...
The formal parameter occupies its own memory space. When you call the subroutine, the value of the actual parameter is passed to the formal parameter. If the value of the formal parameter changes, this has no effect on the actual parameter.
Output Parameters That Pass Values
You list these parameters after CHANGING with the VALUE addition:
FORM <subr> CHANGING ... VALUE(<pi>) [TYPE <t>|LIKE <f>] ...
The formal parameter occupies its own memory space. When you call the subroutine, the value of the actual parameter is passed to the formal parameter. If the subroutine concludes successfully, that is, when the ENDFORM statement occurs, or when the subroutine is terminated through a CHECK or EXIT statement, the current value of the formal parameter is copied into the actual parameter.
If the subroutine terminates prematurely due to an error message, no value is passed. It only makes sense to terminate a subroutine through an error message in the PAI processing of a screen, that is, in a PAI module, in the AT SELECTION-SCREEN event, or after an interactive list event.
Specifying the Type of Formal Parameters
Formal parameters can have any valid ABAP data type. You can specify the type of a formal parameter, either generically or fully, using the TYPE or LIKE addition. If you specify a generic type, the type of the formal parameter is either partially specified or not specified at all. Any attributes that are not specified are inherited from the corresponding actual parameter when the subroutine is called. If you specify the type fully, all of the technical attributes of the formal parameter are defined with the subroutine definition.
The following remarks about specifying the types of parameters also apply to the parameters of other procedures (function modules and methods). If you have specified the type of the formal parameters, the system checks that the
corresponding actual parameters are compatible when the subroutine is called. For internal subroutines, the system checks this in the syntax check. For external subroutines, the check cannot occur until runtime. By specifying the type, you ensure that a subroutine always works with the correct data type. Generic formal parameters allow a large degree of freedom when you call subroutines, since you can pass data of any type. This restricts accordingly the options for processing data in the subroutine, since the operations must be valid for all data types. For example, assigning one data object to another may not even be possible for all data types. If you specify the types of subroutine parameters, you can perform a much wider range of operations, since only the data appropriate to those operations can be passed in the call. If you want to process structured data objects component by component in a subroutine, you must specify the type of the parameter.
Regards,
Bhaskar

I added Edit Preferences Quiz Pass or Fail If Passing Grade Go to the next slide

Unfortunately, it doesn't work. The playback frame stays on the quiz reporting page. Please, can anybody tell me what I could be doing wrong?

Rod -
At the end of the quiz I have my "PASS" and "FAIL" screens set up, one after another. In the Captivate Preferences, under "Quiz Pass and Fail" - I have that if they Pass, they jump to the "PASS" slide, and if they Fail they of course go to the "FAIL" slide.
When I play the course and pass, the pass screen that I built shows up after it shows my results, but then immediately goes to the fail screen that I built. How can I stop that from happening? Do I need to hide the playbar when the user gets to that page? I'd rather not as I want the user to be able to restart the course if they want to without having to close then reopen.
Many thanks -
Kevin

Objects - Pass by refrence or pass by value ----Confusion

Hii Javaties
I have confuison regardhing whether objects are passed by value or refernce -----------------------------------------------------
i have a function ( test() ) that calls
another function ( change(Test_Bean) ) which takes a bean as a parameter.
If in this calling function i change the value of the bean , then the value of bean is actually altered in calling function .
function change(Test_Bean)
     test_bean.setName("Peter");
function test()
      Test_Bean test_bean=new Test_Bean();
       test_bean.setName("Tom");
       change(test_bean);
       System.out.println("Name ="+ test_bean.getName());
       /* Name = Peter is printed */
}Can anybody tell me why is this so ?

Your code demonstrates the proper functioning of pass
by value. You altered the state of an object by using
the correct method. That has nothing to do with
attempting to reassign the reference which would be
pass by reference and you can't do.If this is pass be value , then how can i change the value of original copy ?
If i am using the correct method to alter the state , then it sould alter the state of the local copy not the of original object.
I am still confused .......

When typing in log on , accidentaly typed pass word. Now pass word comes up by its self.

On Facebook log in I typed email and pass word on log in line. Now when I type first letter of log in, log in plus password show up. can I stop this ?

You can remove the password from the password manager.
# Click the orange Firefox button then select Options to open the options window
# Go to the Security panel
# Click the "Saved Passwords" button to open the passwords manager
# Select the site in the list, then click Remove

NBA League Pass Restricted to Team Pass

I bought NBA League Pass through Apple TV using my iTunes account. But when I go to the NBA app it shows my account as Team Pass with restrictions on only watching 1 team's games.
I logged into NBA TV on my desktop and my account is definitely 'League Pass'. It also works as League Pass on my iPhone and iPad. Just not on Apple TV where I bought it from and where I want to use it.
NBA TV support has been so-so. With the best solution so far being: "have you tried turning it off and on again".
Has anyone else experienced this bug and resolved it?

I'm glad I read this...I was just about to jet to my nearby bestbuy to pick up an ATV2 for nba league pass broadband.
Not surprised at all. I have subscribed to NBA LP Broadband for the past two years and have always been disappointed in its poor implementation of delivering its content. The worst is to check into a game right after it's live feed has ended, and to be greeted by the "this game will be available for replay soon" message. This lack of "transparency" in the way content is delivered runs across the board in their poorly conceived UI interface, the cludgy log-in process (through a series of webpages), and the poor poor customer support.
They really don't care. There are no competitors, there is no pressure to improve it. Content-delivery for NBA games, and probably all professional sports, is seriously seriously broken. The only reason to own cable/satellite for me, is to watch the NBA, but it's such a waste. And if you just decide to go with the NBA LP Broadband, you miss out on all the marquee games only available on ESPN and TNT (and now NBA TV) throughout the season. And then when the playoffs roll around, you're screwed, because you can only watch the playoffs on cable/satellite.
The only moment of grace, is to watch over-the-air HD feeds of the NBA Finals, which is FREE.
I'm curious to see if Apple and the NBA can get NBA LPB working on the ATV2, but I wouldn't hold your breath. The fault probably most likely falls on the NBA's end, not Apple's, past subscribers of NBA LPB, like me, know.

Drivers picked from winpe pass instead of offlineServicing pass during unattend installation

hi
I am doing an unattend installation and passed different driver locations in Windowspe pass and offlineServicing pass.
I went through the logs and it has processed the windowspe driver location in both the passes.
below is the snippet of answer file:
<settings pass="windowsPE">
 <component name="Microsoft-Windows-PnpCustomizationsWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <DriverPaths>
 <PathAndCredentials wcm:action="add" wcm:keyValue="01">
 <Path>z:\script\nbannoth\</Path>
 </PathAndCredentials>
 </DriverPaths>
 </component>
<settings pass="offlineServicing">
 <component name="Microsoft-Windows-PnpCustomizationsNonWinPE" processorArchitecture="amd64" publicKeyToken="31bf3856ad364e35" language="neutral" versionScope="nonSxS"
xmlns:wcm="http://schemas.microsoft.com/WMIConfig/2002/State" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
 <DriverPaths>
 <PathAndCredentials wcm:action="add" wcm:keyValue="01">
 <Path>z:\script\madhmeht\</Path>
 </PathAndCredentials>
 </DriverPaths>
 </component>
 </settings>
this is the part of logs:
2014-01-15 14:34:03, Info PnPIBS: Entering PnP callback to install drivers on WinPE ...
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver paths ...
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver directory C:\$WinPEDriver$.
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver directory X:\$WinPEDriver$.
2014-01-15 14:34:03, Info PnPIBS: Checking for pre-configured driver directory Z:\$WinPEDriver$.
2014-01-15 14:34:03, Info PnPIBS: Finished checking for pre-configured driver paths.
2014-01-15 14:34:03, Info PnPIBS: Reading driver paths from unattend.xml ...
2014-01-15 14:34:03, Info PnPIBS: z:\script\nbannoth\ is listed as a driver path in unattend.xml ...
2014-01-15 14:34:03, Info PnPIBS: Finished reading driver paths from unattend.xml.
2014-01-15 14:34:03, Info PnPIBS: Building the list of drivers in the path z:\script\nbannoth\ ...
after few lines :
2014-01-15 14:34:06, Info PnPIBS: Exiting PnP callback to install drivers on WinPE ...
2014-01-15 14:34:06, Info PnPIBS: Entering PnP callback to add drivers to the offline image ...
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver paths ...
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver directory C:\$WinPEDriver$.
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver directory X:\$WinPEDriver$.
2014-01-15 14:34:06, Info PnPIBS: Checking for pre-configured driver directory Z:\$WinPEDriver$.
2014-01-15 14:34:06, Info PnPIBS: Finished checking for pre-configured driver paths.
2014-01-15 14:34:06, Info PnPIBS: Reading driver paths from unattend.xml ...
2014-01-15 14:34:06, Info PnPIBS: z:\script\nbannoth\ is listed as a driver path in unattend.xml ...
2014-01-15 14:34:06, Info PnPIBS: Finished reading driver paths from unattend.xml.
2014-01-15 14:34:06, Info PnPIBS: Building the list of drivers in the path z:\script\nbannoth\ ...
here i believe it should have gone for z:\script\madhmeht
please let me know if I am doing anything wrong.
My sole aim is to have drivers in offlineServicing, but somehow its not reading them.
Thanks in advance.

Hi,
The two component work in different configuration pass.
The Microsoft-Windows-PnpCustomizationsWinPE component is used to add one or more out-of-box drivers to a Windows installation. Drivers that are located
in the path specified by DriverPaths are copied to the driver store of the Windows installation during the windowsPE configuration pass.
The Microsoft-Windows-PnpCustomizationsNonWinPE component is used to add one or more out-of-box drivers to a Windows® installation. Drivers located in
the path specified by DriverPaths are copied to the driver store of the Windows installation during the auditSystem configuration pass.
And the log is still showing PE stage.
Microsoft-Windows-PnpCustomizationsWinPE
http://technet.microsoft.com/en-us/library/cc748846(v=WS.10).aspx
Microsoft-Windows-PnpCustomizationsNonWinPE
http://technet.microsoft.com/en-us/library/ff716281.aspx
Hope this helps.

Adobe Premiere Elements 13 ne permet plus ceci : VBR 2 passes

Lors de l'export d'une vidéo, je ne peux pas exporter en "variable bit rate" VBR avec 2 passes. Cela était pourtant bien fonctionnel dans la version 12 d'Adobe Premiere.
Il semble que c'est un bug, mais qu'Adobe ne le corrige pas.
Voici d'autres forums qui parlent de ce problème :
- Adobe Premier Elements 13 Missing VBR 2 Pass
- Adobe Premier Elements 13 Missing VBR 2 Pass
- Premiere Elements 13: Bugs and shortcomings
- ATR Premiere Elements Troubleshooting: Premiere Elements 13 Daily Discoveries
J'ai contacté le support d'Adobe mais, ils n'ont pas de solutions... :-(

VBR or CBR for H.264 Blu-Ray?

When encoding a 2 and a half hour H.264 Blu-Ray project from Media Encoder, is it better to use VBR 1 Pass, VBR 2 Pass, or CBR? I want it to be a total of 15 Gigs when it's done encding in Media Encoder.
When working in DVD Studio Pro, I always use CBR without a problem. Those were not Blu-Ray discs though.
My Target Bit Rate is at around 12
My Max Bit Rate is 25 or 20.
Media Encoder 5
Premiere Pro cs 5.5

Jim Simon wrote:
Neither. CQ mode is best.
http://tangentsoft.net/video/mpeg/enc-modes.html
http://www.videohelp.com/tools/XviD4PSP
For more information on a description of Constant Qiuality (CQ) vs Constant or Variable Bitrate (CBR, VBR) have a look here on page 5..
http://www.x264pro.com/wp-content/uploads/x264_PRO_Help.pdf
The Adobe bundled h.264 doesn't have CQ though so it's best to go with VBR vs CBR because it will steal bits from less complex frames before and after when it's needed. It will also allow short term bursts of information (up to the Maximum threshold) so that when bits are needed it can use them. - eg a scene change.
Also, do 2-pass. The first pass it will learn about when it's going to easy and hard to make frames. With that information on the second pass it can steal from the future since it knows that the future frames might not need many bits.
Also, if you have a very simple frame it will reduce the bitrate and save you on the total size. If you use Constant Bitrate you don't have any of these efficiencies.
Constant Quality doesn't look at the problem from a bit perspective. It makes a variable bitrate based on the quality of each frame you want to hit.
'hope that helps.

1 pass VBR vs 2 pass VBR

Similar Messages

Maybe you are looking for