1 st step , 2 nd step and 3 rd Step in cockpit

Note 1462093 - Create purchase order in sourcing application fails
the 3rd step of the sourcing application .
Is it new practice and defined by SAP steps must be followed in cockpit
1 step
2 step
3 step.
can any one clarify .what is 1 st stp, 2 nd step and 3 rd step ...
thanks
muthu

Hello Muthu,
Guided Activity Floorplan (GAF) is a design template that dictates the structure and behavior of a user interface of a guided activity.
For more information check out the help link below.
Link: [url] http://help.sap.com/saphelp_nw70ehp2/helpdata/en/4d/6d90bd7990407ab52f2db5b7295068/frameset.htm

Similar Messages

I can't able to enable my application and backend logs in admin cockpit for agentry

Hi experts,
Hope you all fine, am not able to enable my application and file back end logs in admin cockpit log settings that drop down itself disabled state
Kindly post your solutions
(Screenshot attached)
Thanks
Kavi

Check this discussion.
Log settings drop down disabled in SAP Maangement Cockpit

Difference between delta queue and unserialized v3 update - lo cockpit

Hi guys,
What is the difference between delta queue and unserialized v3 update.
How does sm13 come into picture. During system outages, how is setup table affected.
Edited by: zsl05 on Apr 22, 2009 11:29 PM

Hi,
In BW there are basically 3 types of delta queue mechanisms
1) Direct Delta: In this, as soon as the data is posted in the application tables, it is transfered to the RSA7 delta queue.
2) Queued delta: In this, as soon as the data is posted, it is first transferred to the Extractor Queue(LBWQ) and then via V3 Collective job to the delta queue periodically. The transfer sequence is the same as the sequence in which the data was created
3) Unserialized V3 : In this,when data is posted to the application table, it is posted into the Update queue first(SM13). It is then transferred to the Extractor queue (LBWQ) and then via V3 jobs to the Delta queue (RSA7). The difference lies in the fact that the sequence in which data was posted in the application table does not matter.
Hope this helps.
Regards.

Letter of credit in import - customization and user steps

Hi
we want to use foreign trade module to track letter of credit in import. we want to track LC status with limits and validity dates.
but in cockpit (ENLO) we are not getting vendor selection. it is only customer selection available.
please let us know how we can create LC document in ENLO for vendor. if anybody has configuration step and user manual please revert.
Thanks & Regards

sap has confirm that this functionality is not available for import hence not possible in sap.

Trouble at step number 4 when connecting Nakisa and TREX

Hi all,
We are on step #4 of this wiki: /people/luke.marson/blog/2010/09/20/setting-up-netweaver-embedded-search-trex-for-sap-ehp4-talent-management
We ran the report ESH_ADM_ INDEX_ALL_SC and went back to the cockpit to check the status of the connections. After refreshing the cockpit to get the new status', they came back as errored out.
Here is the error report:
09/29/2011 10:33:07 Job started
09/29/2011 10:33:07 Step 001 started (program ESH_IX_CRT_INDEX_OBJECT_TYPE, variant 3AFB50705273F8, user ID Z4W4F)
09/29/2011 10:33:07 Start indexing for:
09/29/2011 10:33:07 Object type name:HRTMC_AES_DOCUMENTS
09/29/2011 10:33:07 Connection GUID:4E8398BF99420600E10080000A020E2F
09/29/2011 10:33:07 Logical system:E1DCLNT300
09/29/2011 10:33:10 Object 'nw_esh_tst_auto' not found as part of address 'sap/public/bc/nw_esh_tst_auto/ATTACHMENTS/SAP_NW_E'
09/29/2011 10:33:10 Object 'nw_esh_tst_auto' not found as part of address 'sap/public/bc/nw_esh_tst_auto/IMAGES/FrankBrown.jp'
09/29/2011 10:33:10 Object 'nw_esh_tst_auto' not found as part of address 'sap/public/bc/nw_esh_tst_auto/ATTACHMENTS/SAP_NW_E'
09/29/2011 10:33:10 Object 'nw_esh_tst_auto' not found as part of address 'sap/public/bc/nw_esh_tst_auto/IMAGES/FrankBrown.jp'
09/29/2011 10:33:40 Execute initial indexing
09/29/2011 10:33:40 Object connector E1D300HRTMC_AES_DOCUMENTS: New status: Indexing
09/29/2011 10:33:40 Data of NW authorization objects could not be indexed
09/29/2011 10:33:40 Indexing ended with error
09/29/2011 10:33:40 Remote communication failure with partner http://TREXURL:30103/asxml/multiIndexCellTable
09/29/2011 10:33:40 Indexing of complete objects from type USER_AUTHORITY has returned 0
09/29/2011 10:33:40 Indexing ended with error
09/29/2011 10:33:40 Remote communication failure with partner http://TREXURL:30103/asxml/multiIndexCellTable
09/29/2011 10:33:40 Indexing of complete objects from type USER_AUTHORITY has returned 0
09/29/2011 10:33:40 Remote communication failure with partner http://TREXURL:30103/asxml/multiIndexCellTable
09/29/2011 10:33:40 Indexing of complete objects from type USER_AUTHORITY has returned 0
09/29/2011 10:33:40 Indexing ended with error
09/29/2011 10:33:40 Job finished
It should be noted that we have tested this whole process in our Sandbox environment and got through all of the steps with no errors anywhere.
We are on Version 3.0 SP1 EhP4, and TREX Version 7.1 patch level 43.

Luke,
This problem has been resolved. After doing some preliminary research, for my next move I wanted to have our TREX admin make sure everything was connected inside TREX and it was working properly on its on with out outside Applications.
This fixed the our problem getting Nakisa connected, as there was a TREX connectivity issue to begin with. We fixed the issue with TREX and then reran the report and they were all indexed properly.
We are testing it now to make sure everything is working properly, and I will update this thread if there is any more questions or updates on our progress.
Thanks again,
Zach

PO not created automatically after creation and approval of SC

Hi all,
We are using SRM7.0 Extended Classic Scenario.
We are able to create Shopping Cart successfully.
For items where a source of supply is not supplied, the Shopping Cart goes through the approval process and then into the sourcing Cockpit.
But for the other Shopping Carts, PO is not getting created automatically after the approval of SC.
Any ideas/suggestions on this issue would be highly helpful.
Thanks,
Priya

Priya,
Can you check this configuration in Sourcing for particular PCat?
*Automatic requirement grouping; sourcing for items without assigned*
source of supply:
Then run the report BBP_SC_TRANSFER_GROUPED which will automatically group requirements together for
the creation of a PO.
And, If the requirement does not have a source of supply, it appears in the work list of the sourcing application for manual assignment. Once you have assigned a source of supply, you can submit the requirement to the report.
Let us know if it works, and should help you this one.
Thanks,
Rahul Mandale

CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1

hi ia m getting this error during the upgrade .i did checked in sm12 for any failed updates but there arent any .so i think there should be a table that i need to alter.should this be done in se16 ? and i think the table name is TRAN.LBWG any ideas.
CHECK OF UPDATE TASK Errors and RETURN CODE in RSVBCHCK.MX1
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
Long text:
    Cause
      Changing the extract structure &V#& for application &V#& is not
      permitted, because the restructure table &V#& for the extractor still
      contains data in &V#&.
      You cannot change the structure in this status, because when you load
      an InfoPackage from BW, this leads to errors.
    What to do
      <DS:TRAN.LBWG>Delete</> the entries for all restructure tables for
      application &V#&.
1 ETH010XRSVBCHCK: Check of open update requests
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
t" ""MC02M_0HDRSETUP""100"
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
t" ""MC02M_0ITMSETUP""100"
A2EEMCEX 141 Struct. appl. "02" cannot be changed due to setup table -> Long tex
t" ""MC02M_0SCLSETUP""100"
A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
t" ""MC03BF0SETUP""100"
A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
t" ""MC03BX0SETUP""100"
A2EEMCEX 141 Struct. appl. "03" cannot be changed due to setup table -> Long tex
t" ""MC03UM0SETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11VA0HDRSETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11VA0ITMSETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11VA0STHSETUP""100"
A2EEMCEX 141 Struct. appl. "11" cannot be changed due to setup table -> Long tex
t" ""MC11V_0SSLSETUP""100"
A2EEMCEX 141 Struct. appl. "13" cannot be changed due to setup table -> Long tex
t" ""MC13VD0ITMSETUP""100"
4 EPU202XEND OF SECTION BEING ANALYZED

1. Call transaction SMQ1 and check whether all queues in all clients (client = '', queue name 'MCEX') have been processed. To process the queues, start the collective run report for each application in the displayed clients. If you no longer need the data in the BW system, deactivate the relevant extraction queues and DataSource in the LO cockpit (transaction LBWE) and delete the queue entries in transaction SMQ1.
2. If you use the V3 update that is not serialized (usually only for application 03): Start collective run report RMBWV303. Then check the update orders in transaction SM13. If there are incorrect update orders in transaction SM13, correct the orders and then start the collective run report again. If you no longer require the update orders, you can delete them. There may be inconsistencies between tables VBMOD and VBHDR. For further information about this, see Notes 652310 and 67014.
3. Before the upgrade, delete the contents of the setup tables. Execute report RMCEX_SETUP_ENTRIES to find out which setup tables still contain entries. You can use transaction LBWG to delete the contents of the setup tables for all clients.
Unfortunately the check that the system carries out during the upgrade or when you import a Support Package does not display all affected applications. Therefore, Note 1083709 provides a check report that you can use to determine all affected applications and tables or queues.

NWBC and Solman

Hi ,
I am looking to use NWBC for Solman. I tried to connect with path /sap/bc/solman/nwbc/solmanwork. Is that right?
When I test thi service I have an error:No administration role defined for cockpit "solmanwork". It looks like it searchs for role "SAP_DAL_ADMIN_solmanwork" or "Z_DAL_ADMIN_solmanwork".
Do I need to create them? Where should I assign them?
Edit: I created a role Z_DAL_ADMIN_SOLMANWORK, copy of SAP_SMWORK_CHANGE_MAN and assigned it to the cockpit solmanwork via NWBC_SET_ADDITIONAL_ROLE_ATTR.
Now I have an error of connexion (401):
ERROR <NWBC::CConnectionManager> | Failed to load content from connection Solution Manager! (error Non autoris.. (401), error code 1)
Thanks a lot,
Julien

Hi,
Same problem here. We want to integrate NWBC with the SolMan workcenters to give an "easy" acess to SolMan to our managers.
Is there any documentation, guideline etc. about how to make this configuration?
Thanks in advance,
Jon

0QM_C06 and 0QM_C09

Hi
I want to upload the data into Quality management cubes 0QM_C06 and 0QM_C09. In LO cockpit the QM application component is ' 05 '.
But for 2 cubes the infosources are different.
Ex: for 0QM_C09 the following are the sources:
2LIS_05_ITEM: Quality notifications - items
2LIS_17_ITEM: Maintenance notifications - items
2LIS_18_ITEM: Service notifications - items
As we are using only 05 applicatioin component. Do we also need to use 17 and 18 to upload the data into the cubes or only 05 is to be uploaded.
Regards
annie

Hi
Thanks for your reply. My client is not using service and plant notifications. So no need for me to load.
But client requires something called Quality info record which is stored in QINF table in R/3. My standard extractors are not pulling tht data from that table. How do i get the data from that table. do we have any standard extractor.
Regards
Annie

Bugs: Virtual Desktops in an alpha test non-usable kind of state where it can hardly be tested (where the heck am I, ALT+TAB, and so on)

Thus: This feature cannot be considered valid before it is actually being widely used and tested by people (testers).
It's really hard to test virtual desktops right now. Probably because its too incomplete to be tested. Too much alpha kind of state.
Triggering a shortcut in Internet favorites does not open a new instance of IE on the same virtual desktop - but on another different desktop.
ALT+TAB slides virtual desktops - but sometimes it does app switching ... both ... so when does it work one way ... and then another.
Going to a virtual desktop I see all the open on the taskbar for another context (i.e. another virtual desktop). Click the icon of that application I am on virtual desktop 1 ... clicking an instance ... I go to another virtual desktop where that app lives.
It feels like a really weird universe ... where you go to strange behaving meta-context where sometimes up is down and down is up --- and then down is down and up is up ... and then you enter the door of cockpit of spaceship 1 and comes out in the cockpit
of spaceship 2 ....................... then controls are even more weird. You do not know which space ship you are controlling for sure (up is up and down is up .... 1+2=-11) (i.e. non-intuitive)

kaeandcolesmon,
If you open the recovery drive (partition) it should only have a single folder (Recovery).
To make sure that your not saving restore points to that drive.
See:
Start, Control Panel, System, System Protection tab. Make sure the D drive partition is set to OFF so that it does not save there.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Create PO with reference to a contract

Hi all,.
Can someone explain me the steps to create PO from SOCO using a contract??
During contract creation,under header tab,what is the use of the check box "BASIC CONTRACT"???
How are price changes distributed from contracts to catalog???

Hi
how many contracts you have for this material / material group .
if you have only one contract system automatically assigned to sc.
assume that you dont assign any source of supply and cart came to cockpit
take your item into cockpit and click propose source of supply . now all avaialble contract must be available for sourcing or
you can manually enter the contract and item number in the cockpit and create a PO
if you dont get a respective contract for respective material - there is something wrong on the contract. what type of contract . what is the status of the contract
muthuraman

No Requisition Found in Assign sources of Supply, under central function

Steps followed:
1) PR is created in ECC prod 1000000262
2) Through SRM after selecting the PR we selected Collective Processing
and then transfered to sourcing cockpit. We got the green message
transfered to sourcing.
3) We tried to access the same PR in Assign Source of supply in central
function. But we could not access the the PR. The message is "No
requisition found; verify your entries ".
Any clue or solution to this Issue. ??
Thanks in advance
SK

Hi Manjunath,
In BBP_PD SC is created
In SXMB_MONI in SRM, ECC and PI/XI system everything looks ok
I am a SRM Tech Consultant Did not understand from NOTE 1263876.
When I go for "Assign Sources of Supply" under Central function
I do not get any result...I get message
"No requisition found; verify your entries "
Thanks
SK

BI Admin Cockpit process chains fail to install

Hi All,
I'm attempting to install and configure the BI Admin Cockpit on our BI Development system.
I've followed the steps outlined in the collective note, 965386.
When running transaction rstcc_inst_biac to install the Content for the BI Admin Cockpit, the background job RSTCC_ACTIVATE_ADMIN_COCKPIT cancelled with error message RS 062.
Regarding this, instructions from note 1039381 were used to clear table entries and I re-ran the job, this time successfully.
Checking slg1, the logs show no errors and only minor warnings and it can be seen via RSA1 that some Technical Content is in the Activated state.
However, when entering transaction RSPC to schedule the process chains, the screen is blank and it appears that the associated chains have not been installed.
Regarding this, note 1065249 has been checked:
<i>'This note needs to be applied only if SP level of software component BI_CONT is less than SP7 and SAP_BW is greater than or equal to SP13.'</i>
Our system is currently at the required SP levels, BW13 and BI_CONT SP7.
Any ideas on how to install the process chains would be very welcome.
Chris

I was able to install BI Admin Cockpit recently after multiple attempts. All process chains installed properly. There are still some minor issues but in general I was able to see the BI Stats reports. Here is the steps that I did:
System Info: SAP_BW 700 13, BI_CONT 703 5
1. Note 934848: Select only myself system in the TX:RSOR Source System
2. Note 834280: Installing technical BI Content after upgrade
3. Apply OSS note: 1039381, 1065249, 1044792
4. Note 965386: Activate tech content in IMG (SPRO) sequentially from Activate SAPI Data Sources ... to Activate Technical Content. Activating it sequentially will help identify which step is failing.
5. Activate Process Chains using txn RSOR Technical Content (0TCT*).
The process chains were installed but failed to be activated. Whe I double click on a process chain nothing was displayed but edit the process chain anyway and activate manually.
Good luck.
Tony

Custom Field/Column in Sourcing Cockpit Overview

Hi All,
We are using SRM 5.0 Classic Scenario and requirement is to add custom fields like Material No. and Delivery date on Sourcing cockpit overview as columns.
I have already checked the Templates and the Screen for SAPLBBP_SOCO_UI_ITS screen 200 and 300. Since there are no structures availing Custom fields I do not think we can add custom column in SOCO Overview.
Request your guidance on how to, if this functionality can be achieved.

Hi Swarnim,
To bring customer fields to the sourcing cockpit , you need to add those custom fields to shopping cart first and these fields will automatically show up in the sourcing cockpit.
To add fields in the shopping cart you need to follow the steps given in the following blog:
/people/nanda.kondagunta/blog/2006/10/23/how-to-create-custom-fields-in-srm
To find out in which structures the field is to be included you can go through the following notes:
Note 672960 - User-defined fields 2
Note 458591 - User-defined fields: Preparation and use
And after adding the fields in shopping cart you need to regenarate the sourcing screens so that the custom fields are dispalyed in the sourcing cockpit. For doing that the below given note:
Note 632982 - Generation of the screens for the sourcing.
Hope this helps.
Thanks,
Pradeep

Implement BI 7.0 Technical Content for BI admin Cockpit

Hi Experts
I should begin to activate, fill, and use the BI Technical Content system.
My goal is to set up and use the BI Administrative Cockpit.
I start by filling the necessary objects and running the queries.
I am new to this area.Could any one provide me step by step solution for How to activate BI Admin Cockpit technical Content in BI 7.0
How should I tranfer data and run queries.Please through light on these topics.If you have any useful materila pls forward to my mail id:[email protected] your time and help.
Thanks,
Vamsi .

Hi,
Did you see the doc below.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Regards.

1 st step , 2 nd step and 3 rd Step in cockpit

Similar Messages

Maybe you are looking for