10.10.2 mac mail not working with Godaddy

After set up in Mac mail, will not pull Godaddy email. Godaddy's web site has suggestions but none seem to work. Any suggestions?

Do you have two step authentication setup with your account? If yes, get an app-specific password.
Have you tried deleting the account and adding it back?
Troubleshoot Connection:
With Mail active, under Window in the menu bar, select Connection Doctor.
You want to see two green symbols for your GoDaddy account. One for incoming and one for outgoing.
Are they both red or just one? If it's just the SMTP (outgoing) that is red, most likely you just need to re-enter the password (see below).
EDIT SMTP SETTINGS
In Accounts window > Outgoing Mail Server SMTP: select to Edit SMTP Server list... from popup.
Select account in the list.(It's not uncommon to find extra SMTP servers listed. When you remove account, Mail does not delete the smtp info. You might need to do some clean up in the list to remove the extras.)
Under Advanced Tab:
Apple defaults to the default ports (25,465, 587) but some servers prefer a custom port. Check to see what port they recommend. Gmail for example likes 465, Outlook.com 587. GoDaddy 3535
Verify if your server require SSL. (uncheck SSL if not required)
User Name. Enter full email address eg. [email protected]
Add password if it is blank.(If you have two step authentication setup, you'll need to get an app specific password more info)
Open Connection Doctor under Window in the Menu bar.
Do you see green light now for your account SMTP?

Similar Messages

Mac mail not working with gmail 2 step verification in yosemite

Every couple of days my 2 step verification seems to drop off the mac mail (and calendar) radar. Ive been using mac mail with 2 step verification (gmail account) for about 8 months, no problems. About 1 month ago my mac started asking for my gmail password. I have revoked and regenerated my password about 6 times recently to try to overcome this issue. The new password works for a couple of days and then mail and calendar start asking from my password again.

Not quite a reply, but I'm not sure how best to add to my first comment.
One of the issues with this (and there are multiple) is that I can't use handoff to work on something on my mac, started on my ipad, if it is working through my gmail account eg notes, calendar, email.
This bug is totally crippling the productivity and flexibility that came with ios8/yosemite developments.

Apple Mail not working with IMAP account

I have been using Entourage for my email with several IMAP email accounts. SOme of the accounts I was getting occasional errors so I thought I would try Apple Mail.
I am able to successfully set up the accounts in Mail (i.e. it successfully logs into server) however it does not get any of the mail nor does it get any of the mail folders that are on the IMAP server (viewing email using Web Mail or even going back to Entourage shows the emails on the account). Are there any special (hidden) tricks that I need to do to get Mail to work with a standard IMAP mail server?

I have a very similar problem. Apparently IMAP access is better than POP3. Well IMAP slows my Mac to a complete stop whereas POP3 is seamless. I deleted my POP3 mailboxes after successfully accessing my GMail accounts via IMAP, then it slowed down.
I've deleted the IMAP accounts a few times, but each time a new account is created it forces me to accept IMAP with no option for POP3. The help file also contains no information on POP3.
I get about 50 emails everyday and my usual point of email access has just become redundant, I must now rely on email via my browser and .
I made this change because the iPhone does not sync downloaded emails with Apple Mail. In Mail on my Mac, the one GMail inbox I have setup says there are 11 unread which it eventually shows yet none appear unread. I'll have to rely on web-based email until this is resolved.
Can anyone help with these IMAP access problems?

Microsoft Mail not working with Windows 7 & MS-Office 2010

Dear All
I have a client who is using Microsoft Mail for their internal mailing. They have been using MSoffice ( Outlook) for this purpose for last so many years.
We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
When we tried with different versions, we found that if you install Office 2007 it works. If you try Office 2007 and then Office 2010 and remove Office 2007, it still work. But Then it is treated as 2 installations of Msoffice on the same computer.
I need to know whether this is right from Licensing perspective. We 'll be using single copy of office but it may seems as we have installed Office 2007 & office 2010 on same computer.
--Shekhar

We have found that Microsoft Mail does not work with Windows 7 and MS Office 2010 combination.
When you try to configure it given error 0x8004110.
Windows 7 is a supported operation system for Office 2010. At what exactly point will you get the specific error?
Is that a Click-To-Run version of Office 2010? By default, for MSI-based version of Office, when you upgrade existing Office 2007 to Office 2010, the earlier version of Office will be removed:
http://office.microsoft.com/en-us/excel-help/keep-earlier-versions-of-office-programs-when-installing-office-2010-HA102597134.aspx
For licensing advice, as <Don> suggested above, you should contact your local Microsoft customer support or reseller.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Mac Mini not working with AOL Cable modem

All,
I just bought a brand new Mac Mini but it not working with AOL. My windows XP PC working well with AOL but not with mac mini. Any suggestions? thanks
Hung

I just found an interesting thing that i brought my mac mini to Apple store where i bought it. Hook up with store cable, it can go thru to internet with out sign on AOL. ALso I can connect to AOL very easy. Brought it back home, I tried to open browser w/o sign on AOL like i did at Apple store, it did not work. I also tried to sign on AOL alone, still not work either. The weird thing is, my other Windows XP computer is working well with AOL. I called customer service of AOL for help, who takes care the Mac computer, asked me to follow the simple procedure that I already did before i called them like unplug cable modem, restart computer...etc. Nothing new, and then they transfered me back and forth between Mac and Windows specilist with no help. I was on phone with them for 2 hours yesterday. I'm very disappoint with AOL customer service with the way they serve the customer. I'm thinking to cancel membership with AOL where i stay with them more than 10 years, and look for another cable or DSL ISP. Now I'm packing the Mac Mini back to box and bring it to Apple store to return it. Next thing, is search around which ISP, who supports the Apple comp. I'm living at Los Angeles area where's very easy to find a local ISP Verizon, Earthlink, Road Runner... I'll be back to buy a new Mac when i get the internet ready. I love Apple computer, and i want to have it.

Database Mail not working with SQL Server Agent

I'm running SQL Server 2005 Standard edition 64 bit with SP2 on a 64 bit machine.
Database mail does not work with SQL Server Agent. When I configure SQL Server Agent to use database mail the test email button is greyed out and inactive therefore I cannot send emails using operators or for jub success failure etc.
I've read that there was supposed to be a fix for this with SP1 but I have SP2 and still receive the same problem. Please can somebody help as I do not wish to use SQL Mail as a work around due to this becomming redundant in future versions of SQL Server.
Kind Regards

The problems solved
steps:
1)we create a mail profile at at Managment->Database Mail ,of SQL Managment
2)we set this account as "default" at Managment->Database Mail -> Configure Database Mail -> Manage profile security
3)At tab "Alert System" of SQL Server Agent properties , we check the "Enable mail profile" , Mail System=Database Mail, Mail profile = "the profile we already create"
4)we create a new operator at "Operators" of sql agent, where at "notification options" -> "Email name" we put the mail where we want to sent the agent the mails at failured job
5)We go at a specific job, at tab "Notifications" ,we check the "email" check box and then we choose the operator we just create, at the text box next to check box.
I hope not to forget something
Thank You all for the help

Mac mini not working with logitech h130 headset's microphone

Hi,
I have a mac mini (late 2014) model that appears to not work with my headset's microphone, my headset is a logitech h130 that works perfectly with all other devices that I have (which are not apple), please fix! ASAP

Assuming that the headset has two 3.5 mm plugs you need one of these to combine the headphone and jack into one 3.5 mm plug
http://www.vetco.net/catalog/product_info.php?products_id=16956&gclid=Cj0KEQjwuI -oBRCEi87g0K3O8OoBEiQAb25WAfVF_miP__luOp…
Also see:
]How to use Apple Earphones with Remote and Mic with your Mac - Apple Support

Mac mail not working after Mavericks 10.9.4 update

Help! Mac Mail was working fine, on all 3 of my different email accounts, until I did the Mavericks 10.9.4 update yesterday. Now I cannot receive or send mail and it shows all accounts are offline. Connection doctor says it cannot connect to server. I am able to get online fine and I check with my provider Verizon and all is working perfectly with them......it must be something to do with the update that screwed something up. Any help or suggestions would be AWESOME!

Troubleshooting sending and receiving email messages
Troubleshooting sending email messages

HT201257 mac mail not working

Mac mail stopped working properly so that I'm unable to retrieve fresh mail from my Yahoo or Gmail accounts. I have powered off and on my Macbook Pro, but the problem persists. What are my next steps?

I'm grateful for your offering to help. Although I'd tried everything I could think of to correct my situation where there's an exclamation mark next to my Yahoo Mail account, I got nowhere despite restarting my Macbook Pro, checking with Connection Doctor, etc. Something was suspiciously amiss, as Connection Doctor took much, much longer to connect than with my other email accounts (Gmail, Comcast, Hotmail). But inexplicably, as I'm trying to retrace the paths you'd offered, everything seemed to have corrected itself, as I now, for the first time this morning, see the exclamation mark next to my Yahoo account disappear with access to my Yahoo mail. THANKS!

Have Thundbolt on my mac will not work with my thunderbolt drive

I have a port on my Imac, but it will not work with my ThunderBolt Drive

Agree on cables, you don't want something generic when it comes to thunderbolt in my experience. It's thos accessories that add up and they are profitable for a reason. Cheap isn't always good with accessories.

Dreamweaver CS 5.5 not working with Godaddy FTP with TLS/SSL

I've upgraded to CS 5.5 and tried to connect to a client's Godaddy account with FTP with TLS/SSL it fails. Works perfectly with my mac app Transmit every time as it always has. It doesn't work with implicit or explicit settings with authentication set to none or otherwise.
Can someone please let me know if Dreamweaver will ever be compatible with FTP with TLS/SSL and Godaddy? Or is there some setting I can try that will make it work now somehow?
Been waiting years for this....

SnakEyez02 wrote:
First, that's a Godaddy problem if their security isn't up to par.
That may be the case that Godaddy is also at fault, but every other FTP app I use with Godaddy works fine. It's just Dreamweaver and has always been just Dreamweaver not working with a secure connection to Godaddy. Considering Godaddy is the largest webhost in the USA, you'd think Adobe would have fixed this years ago. I should also mention I'm not endorsing Godaddy and I understand there's plenty of people that don't like Godaddy for very good reasons.
Sent you PM with FTP account with Godaddy yesterday. Thank you for taking a look!
UPDATE: Whoops, I see you responded via private message already. I'll paste most of it here in hopes it helps others to understand the issue:
via SnakEyez02 PM:
Ok this took a lot of digging. I won't say it's not a DW issue 100% and I will report a bug for your problem, but DW is not the problem alone Godaddy needs to share the blame here for a bad certificate. Here is what is happening:
I'll start with DW:
- The settings are correct that were in the post. Port 21, FTP explicit, and the authentication should be set to None (encyprtion only). This is where the transmission is encrypted using SSL, but the certificate is shared and not specific to the domain owner. That is the difference between DW's "none" and "trusted". It's a poor choice of words I'll give them that. However, Godaddy seems to want all connections to be trusted thus the other error you get when you turn on the None option. Now could DW do what Transmit does, warn you and write in an unsigned certificate into the Keychain app, probably, is it best practice for security reasons to "Trust" an unsigned certificate probably not.
Now Transmit:
- As explained above Transmit opens up a prompt to override and create a fake-trusted signed certificate. Thus by forcing the OS to think a legitimate certificate is there it gets you through albeit through unconventional methods.
The problem:
- A good portion of this problem lies with Godaddy. Now I use a shared hosting account and set one up on an independant host for a friend of mine and both of them accept the shared certificates (SSL explicit). The difference is the hostname of the certificate. I ran a traceroute (from Network Utility in Utilities folder) on your website and came up with the following address: 173.201.23x.x.
The problem is that the certificate on your server is actually not for that server which is the reason DW seems to have such an issue with it. The SSL certificate that Godaddy put on your shared server is for host - 173.201.19x.5x. As you can see, it's a certificate for another server. Honestly the fact that Panic's Transmit allows this override scares me a little bit and the fact that Godaddy never noticed this issue either scares me to. So while DW could write in a bad certificate I can see why this is happening.
I know there is not much solice in my answer because it still doesn't alleviate the problem that you have with DW connecting. Unfortunately I do not have a workaround despite my numerous attempts to try and gain access over a secure connection. One alternative you could ask Godaddy for in the meantime is an SSH connection which would allow you to use SFTP instead of FTPS. But that's a short-term solution to a long-term problem.
If you think of anything else feel free to bounce any ideas off me I don't mind. Good luck in getting this solved and I will post a bug report to make Adobe aware of the issue.
Thank you for looking into this issue in depth like you have!
I think the issue might be that Godaddy is applying cost saving measures to keep their prices down in the way they implement their certificates (but it also wouldn't surprise me to know it's simply ineptitude on Godaddy's part either). I'm not sure I fault Panic with Transmit much at all because it clearly warns you about the certificate and it's your choice to continue. And, as it stands now, it's much safer to continue to connect that way with Transmit than to stop and connect with no encryption at all at a public hotspot.
As it stands now, you really shouldn't connect to Godaddy with Dreamweaver at a public hotspot unless you set up an SSH tunnel with your connection first. But enabling SSH is an added expense in many ways including paying for the service, using more computer resources for tunneling and time setting it up and implementation... all because Dreamweaver won't just allow developers the option like Transmit does.
Once again, thank you for looking at this and I hope someone at Adobe finally address this issue for the security of its customers who use Godaddy (which is often not their choice and was, instead, the choice of their clients to use Godaddy as a webhost).
Just a side note, I contacted Godaddy support about this several years ago and they were unresponsive and even hostile about it - So that's definitely another vote against Godaddy from me as well.
Message was edited by: greenbluewave

Mac mail outgoing mail not working with wildblue gmail account

My outgoing mail keeps saying offline. Cannot connect on the default ports. Tried changing ports, with and without SSL. Anybody have any solution?

I've recreated the account multiple times and finally have mail coming through under an "All Mail" label under "Gmail" on the left hand side of the application. The one thing I did do differently was uncheck the SSL box in advanced settings, save changes, recheck the SSL box, save changes. Mail started working after that.
Before this problem existed, I had [Gmail] in the "imap prefix" box in advanced settings in order to get rid of the gmail labels. I did this because I only wanted the Inbox and Sent Items to show in the far left. Right now, i'm only able to view my mail under an all mail folder beneath a Gmail Folder on the left had side. Can I get rid of all these folders and simply use my inbox and sent items icons?
Thanks,
Ryan
Thanks in advance.

How can I get 'Mac mail' to work with PC exchange server

My employers have just upgraded to a new Exchange server and now mail won't work on my mac. The only option I have been given is to use Outlook web access, but it is not ideal for my working needs. The sticking point is that mail wants to connect via IMAP, but the server isn't configured for this. I used to be set up as a POP3 account, but this is not longer an option with our administrators. Is there any way I can continue to use 'Mac Mail'?

Please read this page and see if it helps:
http://www.rit.edu/~wwwits/services/email/setup/setupapplemailexchange.html

Outgoing Mail not working with Mail.app in 10.5.7

I am helping my mom set up her email accounts on her new macbook laptop. It has 10.5.7
I have tried setting up two different email accounts in mail.app, one is a roadrunner webmail account, and the other is a gmail account. For the roadrunner account, I followed their instructions, which can be seen here: http://help.rr.com/HMSFaqs/eOSXmail.aspx
With the gmail account, mail.app was able to do the setup itself from the email address and password.
I know that the account information is partially correct because with both the accounts they were able to correctly download email onto the computer into mail.app. But both accounts have not been able to successfully send an email.
I can provide any other information about the settings used in the outgoing server or advanced information if it would be helpful.

This is so strange. The exact same thing happened to me yesterday. Suddenly, on my Mac and my PC, I was no longer able to SEND email. I am able to receive email...just not send. I too am a Comcast customer. I contacted Comcast and they, of course, said the problem had to do with the servers that my email client is trying to access and that it had nothing to do with them. We then set up my Comcast.net email account (which I never use) and it worked fine (sending and receiving).
So, I switched my other accounts to use Comcast's smtp server and that worked on the Mac only. I can now send email on my Mac but not on my PC.
This leads me to believe that it is not something wrong with my email client (since I have the problem on both my Mac and PC) but instead, something is up with Comcast.
I checked and it turns out that Comcast just implemented a new Acceptable Use Policy which specifically implements a NEW traffic management policy. This was JUST implemented this month. So, I am getting the sneaking suspicion that Comcast is somehow denying me access to those SMTP servers and I have to use their SMTP server instead.
Does this make any sense to anyone???? I am at a total loss here.
Thanks,
Susan

Preview and Mac Mail not working after upgraded to 10.4.11

Hello,
I just upgraded to 10.4 everything works fine, after I upgraded to 10.4.11, I find funny noice on my hard drive and preview, mac mail is not working. Trashing the preference is not working.
Urgent help please.
Thank you
Benny

There are no guarantees, but following this procedure when installing updates and upgrades on your Mac, or even re-installing them, will go a long way towards avoiding unpleasant after effects and ‘post-update stress disorder’.
It is also worth noting that it is an extreme rarity for updates to cause upsets to your system, as they have all been extensively beta-tested, but they may well reveal pre-existing ones, particularly those of which you may have been unaware. If you are actually aware of any glitches, make sure they are fixed before proceeding further.
So before you do anything else:
If you can, make a full backup first.
Turn off sleep mode for both screen and hard disk.
Disconnect all peripherals except your keyboard and mouse.
1. Repair Permissions (in Disk Utility)
2. Verify the state of your hard disk using Disk Utility. If any faults are reported, restart from your install disk (holding down the C key), go to Disk Utility, and repair your startup disk. Restart again to get back to your startup disk.
At least you can now be reasonably certain that your system does not contain any obvious faults that might cause an update/upgrade to fail.
3. Download the correct version of the COMBO update from the Apple download site. If your car runs on gasoline you would not want to fill the tank with diesel, so don’t try to install the PPC updater on an Intel Mac!
The 10.4.11 Combo Updater for PPC Macs is here: http://support.apple.com/downloads/MacOS_X_10_4_11_Combo_Update__PPC
And for Intel Macs: http://www.apple.com/downloads/macosx/apple/macosx_updates/macosx10411comboupdat eintel.html
If you prefer to download updates via Software Update in the Apple menu (which would ensure that the correct version for your Mac was being downloaded), it is not recommended to allow SU to install major (or even minor) updates automatically. Set Software Update to just download the updater without immediately installing it. There is always the possibility that the combined download and install (which can be a lengthy process) might be interrupted by a power outage or your cat walking across the keyboard, and an interrupted install will almost certainly cause havoc. Once it is downloaded, you can install at a time that suits you. You should make a backup copy of the updater on a CD in case you ever need a reinstall.
Full details about the 10.4.11 update here: http://support.apple.com/kb/TA24901?viewlocale=en_US
More information on using Software Updater here:
http://support.apple.com/kb/TA24901?viewlocale=en_US
Using the Combo updater ensures that all system files changed since the original 10.4.0 are included, and any that may have been missed out or subsequently damaged will be repaired. The Delta updater, although a temptingly smaller download, only takes you from the previous version to the new one, i.e. for example from 10.4.10 to 10.4.11. Software Update will generally download the Delta updater only. The preferable Combo updater needs to be downloaded from Apple's download site.
Now proceed as follows:
4. Close all applications.
5. Unplug all peripherals except your keyboard and mouse.
6. Install the update/upgrade. Do not under any circumstances interrupt this procedure. Do not do anything else on your computer while it is installing. Be patient.
7. When it ask for a restart to complete the installation, click restart. This can take longer than normal, there are probably thousands of files to overwrite and place in the correct location. Do nothing while this is going on.
8. Once your Mac is awake, repair permissions again, and you should be good to go!
If your Mac seems slightly sluggish or ‘different’, perform a second restart. It can’t hurt and is sometimes efficacious!
9. Open a few of your most used applications and check that all is OK. In this connection please remember that not all manufacturers of third party applications and plug-ins, add-ons, haxies etc, will have had time to do any necessary rewrites to their software to make them compliant with the latest version of your operating system. Give them a weeks or two while you regularly check their websites for updates. This applies particularly to plug-ins for Safari 3.
N.B. Do not attempt to install two different updates at the same time as each may have different routines and requirements. Follow the above recommendations for each update in turn.
Lastly, Apple's own article on the subject of Software Update may also be useful reading:
http://docs.info.apple.com/article.html?artnum=106695
If you are updating Safari (or just have):
Input Managers from third parties can do as much harm as good. They use a security loophole to reach right into your applications' code and change that code as the application starts up. If you have installed an OS update and Safari is crashing, the very first thing to do is clear out your InputManagers folders (both in your own Library and in the top-level /Library), log out and log back in, and try again.
So, disable all third party add-ons before updating Safari, as they may not have been updated yet for the new version. Add them back one by one. If something goes awry, remove it again and check on the software manufacturer's website for news of an update to match your version of Safari. Remember: Tiger up to 10.4.10 used Safari 2.0.4 or, if you downloaded it, Safari 3.0.3 beta. Safari 10.4.11 used Safari 3.0.4 which was not a beta. If Safari 3.1.2 on 10.4.11 is not the fastest browser you have ever used, then something is wrong!
Moreover, trying to revert to Safari 3.0.4 (or worse still, version 2) when running 10.4.11 or 10.5 can have repercussions, as Safari 3.1.1 uses a completely different webkit on which other applications like iChat, Mail and Dashboard Widgets etc also rely, and may entail you having to reinstall an earlier operating system.
Most errors reported here after an update are due to an unrepaired or undetected inherent fault in the system, and/or a third party ad-on. Two such add-on that have been frequently mentioned here for causing such problems are Piclens and Pithhelmet. If you have them, trash them.
Additional tips on software installation here:
http://docs.info.apple.com/article.html?artnum=106692
To reiterate, Input Managers reach right into an application and alter its code. This puts the behavior of the affected application outside the control and responsibility of its developers: a recipe for problems. That's not to say that issues absolutely will ensue as a result of Input Managers, but you, as a user, must decide. If the functionality of a specific Input Manager or set thereof is really important to you, you may well choose to assume the associated risk.
Again, the advice is to remove all Input Managers from the following directories:
• /Library/InputManagers
• ~/Library/InputManagers
especially prior to system updates (they can always be added back one-by-one later).

10.10.2 mac mail not working with Godaddy

Similar Messages

Maybe you are looking for