10.7.5 Server - AFP Userdirectorys, one iMac & one MBA per User, practicable?

Hello,
I wanted to ask you whether someone has the title described in the constellation in operation.
So far running all local accounts access the 10.7 server resources (AFP) with the OD credentials.
As the number of employees increase, two more locations to be included and also a need for synchronized user profiles on iMac & MBA arose I wanted to know if anyone cared for a similar configuration and can perhaps tell me how well it runs.
Are there for example.
-Problems in matching/syncing the mobile user profile account with server and than to network account and back?
-Is there a way individual users folders in all three locations be present?
All client devices run10.7.5.
Maybe someone who could tell me in german, sorry for that I'll try my best if anyone could help me in english, too!
For any information, I am very grateful!

Try reindexing the mailbox. This can take awhile if you have a lot of mail.
Reindex messages.
If that doesn't work try deleting MessageUidsAlreadyDownloaded3.
Quit the application.
You need to look in your user Library. Either hold down the option key while using the Finder “Go To Folder” command and select your user Library in your home folder or use the Finder “Go To Folder” command and enter ~/Library/Mail/V2/Mail Data/MessageUidsAlreadyDownloaded3. Move the file to your desktop.
Open the application and test. If it works okay, delete the file from the desktop.
If the application is the same, return thefile to where you got it from, overwriting the newer ones.
If you prefer to make your User library permanently visible, use the Terminal command found below.
Show User Library
You might want to bookmark the command. I had to use it again after I installed 10.8.5. I have also been informed that if you drag the user library to Finder it will remain visible.

Similar Messages

Permit only one access per user on guest portal Cisco ISE

Hi,
Could you please help me to figure it out if it´s possible to create a guest account on cisco ISE which permit only one concurrent access?
We don't want to have multiple devices registering with the same account, just one different account for each device.
Thanks,

Hi Gino,
You can restrict guests to having only one device connected to the network at a time. When guests attempt to connect with a second device, the currently-connected device is automatically disconnected from the network.
This is a global setting affecting all Guest portals.
Step 1 Choose Administration > Web Portal Management > Settings > Guest > Portal Policy.
Step 2 Check the Allow only one guest session per user option.
Step 3 Click Save.

Limite RemoteApp to one instance per user

Hello everyone,
A customer asked us to make an (unfinished) application available to them. Since this application is unfinished we want to make sure that only one person at a time is using it and that under no circumstances the customer can copy the application.
RemoteApp seems perfect for this, however standard it allows users to open the same application as much as they like with the same credentials.
Is there a way to limit the RemoteApp applications to one per user session?

Hi,
Another idea is to create an additional user account and limit only this account can use this RemoteApp.
Thanks.
Jeremy Wu
TechNet Community Support

Mavericks server only serves one calendar per user

Hi everybody,
I'm a little bit stuck and could use some help. My situation:
I've installed mavericks server, configured dns and open directory, started file sharing, defined home folders for network users on the server, created network users and started calendar & adressbook services.
I've bound a mavericks client to the server and I'm able to log into the client with a network account. The home directory lies on the server and everything is running ok. I've created two calendars with the account and entered some appointments. Logging into another client everthing shows up, as it should be.
So far so good.
Now I'm trying to add the calendar of the above network account to an iphone or to another account on the client. Unfortunately the server presents on the iphone as well on the client only one empty calendar. I suppose it's a new calendar and not one of the calendars I've created upfront on the server.
Any clues?

This might help: http://securityspread.com/2013/10/27/setting-sync-server/

How can I restrict one stream per user?

Hello!
I have made a mp3-streamer in flash. Users must log on to a
web page in order to access my player. If one user logs in once
it's all OK. The problem occurs if a user "share" his account with
multiple others and log in twice (or n-times). Now I have no
control on how many users that can log onto the system.
I'm looking for a solution where for instance the first one
who logs in gets to play the stream, and all others that log into
the same account are refused access to streaming. I'm not a
back-end programmer, so I hope this is something that can be solved
using FMS. Is there a known working solution to this problem or
some features on FMS that can lock streaming to the first user.
I've tried sending in the username, however if user#1 stops
the stream user #2 is able to take over the stream, so now user # 1
is refused the stream.
Trond

FMS does support connections to web services, and can make
http requests in a number of ways. I like to use remoting, but you
can also use loadVars, XML or an XML Socket connection. The best
approach will be dictated by the services you need to connect to.
For remoting, you want to look into netservices.asc , and you can
find some examples/tutorials at flash-db.com
About your scenario
1) Player sends a ticket (SHA or something)
The client (.swf would pass this data to FMS in the
netconnection.connect() argument.
2)FMS runs a remote call and verifies the ticket <-This is
the problem
No problem here. All you need to do is have your FMS app make
the request of the authentication server (based on the token value
provided in the client's connect request) before accepting the
connection. See the docs for application.onConnect()
3a) User already online? (Hmm forgot to turn off your player?)
..disconnect connection and give new connection to same user
Here's the part you'll need some new structure for. You're
going to need to be able to reference other clients that are logged
in under the username of the new client. When a client connects, a
corresponding client is stored in the application's clients[]
array, but it's up to you to add your own variables to each client
object so you have something to reference them by in your
functions. The really cool thing is, once you have a means of
picking the client out of the list, FMS auto-resolves to the client
itself, and you can target the client with other functions.
Take this server side code for example
application.onConnect = function (clientObj, userName){ //
Username was passed in the client connect() argument
clientObj.userName = userName
Now the username is a variable in the client object. To find
a client with a specific user name, you just need to loop through
the application.clients array and look for a match:
function checkForUsername(name){
for (x = 0; x < application.clients.length; x++){
if (application.clients[x] .userName== name){
// match found, do something about it. If we want to dump the
old user, we might do this
application.disconnect(application.clients[x]);
Of course, this is only one approach, but it's about the most
straighforward method I can think of.
In the case of your app, I suggest you send two values to the
FMS app in the client connect() argument... an SHA token, and the
username. You'll use the username for checking user conflicts, and
the SHA to verify the session (this should be a one time thing...
the token expires after a single use)
Hope it helps.

How to realize only one identical remoteApp per session per user per computer?

If a terminalserver 2008 R1 is configured for only one session per user, everything works like it should if the user connects using the 'normal' remotedesktop session. A second connect with the same credentials kicks the first connect.
If a remoteApp is used instead of the 'normal' connect, it's possible to start multiple instances of this app within one user a least from one computer. mstsc do run multiple times and seem to link in the existent connection without kicking it. How to change
that?
Continuative:
The started RemoteApp checks the mutex of all started processes and stops herself if a process is found with the same mutex. This prevents multiple instances of this app within one user with the same sessionID. If a terminalserver is configured for only
one session per user, this RemoteApp shouldn't start multiple within one user. Using a "normal" remote desktop session the app doesn't start more than one time, I tested it. Used as RemotApp, the app starts multiple! Possibly I'm able to change this behaviour
with a code fix instead of configuring terminal services. Any tips regarding mutex and terminalservers?

Hi,
I tested the following code and it is working for me both in a RemoteApp and Full session:
Imports System.Threading
Module Main
Sub Main()
Dim createdNew As Boolean
Dim m As New Mutex(True, "TPMutex", createdNew)
If Not createdNew Then
Return
End If
Application.Run(Form1)
GC.KeepAlive(m)
End Sub
End Module
-TP

Recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124

recd following error when attempt to open ebook using ADE 4.0 : "Unable to Download. Error getting License. License Server Communication Problem: E_LIC_LICENSE_SIGN_ERROR" iMac 10.8.5 Chrome Version 37.0.2062.124
chat with customer service at book company i purchased file:
"Me: I installed the proper adobe software, adobe digital editions 3.0 (now have updated to 4.0) on my mac running os 10.85 however I am getting the following error code when i try to open the file:
"Error getting License. License Server Communication Problem:
E_LIC_LICENSE_SIGN_ERROR"
Charles P.: Okay, what you need to do unfortunately, is contact Adobe at http://www.adobe.com and they will need to get your license issue resolved.
Charles P.: Is there anything else I can assist you with today?
Me: title of error is Unable to Download
Me: i dont see how that would be an adobe problem?
Charles P.: I understand, but it appears that the reason for the download issue is because of the license error the license is related to the Adobe Digital editions software. I understand how this could be confusing but it's due to the authorization of the ADE software. Adobe would need to correct your account issue with the license
Me: ok but i thought this was a free license from adobe??!! this is just a digital editions reader, right??
Charles P.: That is correct it is a free license but your account has to be associated with one license and yes the Digital edition is a ebook reader that our ebooks use for you to view

Well, just for the halibut I tried opening the book again today and , GLORY BE!, it worked.
Guess it may have taken overnight for Adobe to OK my license to their free ADE software. Also works now using Bluefire app as the reader on my android phone, although it was a pain
to get the book file in the right file folder for bluefire to see it.
I hope that time also heels the issue with all other Error Getting License users.
panman

Airdisk shows as Server: afp:// How do I change this to smb://?

Hi.
My HFS+ formatted Seagate 2 TB hard drive shows as an afp server and not a smb server. I want to change this so I can share files and access them from my WDTV Live streaming media player. The WDTV only has the options of smb/ctif or nfs.
How can I change this drive to present itself as a smb server and not a afp server. Currently it appears as afp://<airportname>.afpovertcp.local/2TB_NW_drive
Where 2TB_NW_drive is the name I've called the drive.
Thanks for any help you can provide.

Hi William. Yes it's connected to the Airport Extreme base station.
When I look at the 'Get Info' of the hardrive via the Mac it shows as
"Server: afp://<airport_name>/.afpovertcp.local/2TB_NW_drive". The folders on this hdd show as folders off this drive ie. afp://<airport_name>/.afpovertcp.local/2TB_NW_drive/<folder_name.
I'm attempting to access this drive via WiFi from my WD TV Live Streaming Media Player and I'm guessing that the WD does not see this as an SMB server so therefore ignores it. My thinking (which could be wrong) is that if this drive were to appear as smb://<airport_name>... then the WD will see it and the folders within, as an smb server. WD TV supports SMB or NFS only.
(BTW I can access the HDD from the WD if it's directly connected to my Mac, however the Mac connects Wifi to the AEBS so there are dual Wifi paths. Connecting the HDD to the AEBS direct means there's only one path and potentially better streaming capabilities.)
Thanks for any advice you can give.

I want my "From" address to default to a specific one. I have deleted the outgoing mail server for the one I don't want to use but it still comes up write

Since Comcast will no longer allow me to "send" from my AOL Address I need to change my "from:" address on every e-mail I send. I thought I could make my Comcast outgoing server the default one and that would take care of it - it didn't. Then I thought I could just delete my AOL outgoing server and Thunderbird would then have to use my Comast Outgoing Server - it doesn't. I can continue to try and remember to change the
FROM with the drop down list but it would sure be nice if I could save this aging brain of mine and make the software default for me.

Why not just add an AOL server to Tools/Account Settings/Outgoing Server (SMTP) and then have that server selected in Tools/Account Settings/<i>aolaccount</i> in the Outgoing Server (SMTP) dropdown in the right pane? Use these settings: smtp.aol.com on port 465, SSL/TLS security, Normal password authentication, User name = your screen name.

How can we take backup of all the RDL'S existing at Report server dynamically at one time

How can we take backup of all the RDL'S existing at Report server dynamically at one time ? I want to take backup of all the reports existing at the report server dynamically at one time only. currently I'm able to take backup of the reports folder wise
using VBScript. and I have to pass the folder names again and again. I want this to be happened for all the reports of all the folders at single shot only using VBScript.

Hi DineshRemash,
Based on my research, we can store the following VB Script to a text file, then modify the file name extension from .txt to .rss.
Dim rootPath As String = "C:\Reports"
Sub Main()
Dim items As CatalogItem() = _
rs.ListChildren("/", true)
For Each item As CatalogItem in items
If item.Type = ItemTypeEnum.Folder Then
CreateDirectory(item.Path)
Else If item.Type = ItemTypeEnum.Report Then
SaveReport(item.Path)
End If
Next
End Sub
Sub CreateDirectory(path As String)
path = GetLocalPath(path)
System.IO.Directory.CreateDirectory(path)
End Sub
Sub SaveReport(reportName As String)
Dim reportDefinition As Byte()
Dim document As New System.Xml.XmlDocument()
reportDefinition = rs.GetReportDefinition(reportName)
Dim stream As New MemoryStream(reportDefinition)
document.Load(stream)
document.Save(GetLocalPath(reportName) + ".rdl")
End Sub
Function GetLocalPath(rsPath As String) As String
Return rootPath + rsPath.Replace("/", "\")
End Function
Then navigate to the folder contains the script, we can directly run the below command from the run menu:
rs -s
http://aa/ ReportServer -i download.rss
We can modify the rootpath to point at whaterver fold you’d like to download the RDL files.
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Use a different SSO Server than the one specified during install.

Hello,
I found on documentation that OAS Portal Configuration Guide would tell me how to use a different SSO Server than the one specified during install. I need to tell an existing Portal installation to use a new Identity Management infrastructure server I installed.
However, documentation does not mention anything related to that. It states that ptlconfig would do the trick, but ptlconfig instructions are not clear on how to accomplish this.
Could anyone that has done this before, help me out? Thanks in advance...

Hello jlubbers,
That is exactly what I am talking about, the ptlconfig does not model SSO components. So I assume it is incorrectly referenced on several points of documentation as a tool to work with SSO parameters or configuration.
I need to know how to tell my Portal to look at the new SSO server. If someone has done it before, please let me know.
Thanks again.

I have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

i have a macbook pro can can log into a server, but my new iMac with lion can't even see the server--both are over wifi- how do i get the new iMac to see the server?

Without knowing what you have tried please open System Preferences - Sharing - File Sharing and select File Sharing. If you still have trouble you can call AppleCare in the morning when they re-open. You have 90 days of telephone support if you haven't already bought AppleCare.

How to create 2 server instances in one directory

Hi,
I want to create 2 server instances in one directory . Is it possible ??
If yes how to do it ??
I know that using diff machines is it possible , but I want to create in single system itself.
Thanks in advance,
Rajendra.

Use the Directory Server Console
cd /<server-root>
./startconsole &
Drill down to "Server Root" -> Right click -> "Create Instance of" -> "Directory Server" - Complete the pop up specifying instance name and port.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

Can anyone explain why my Dell laptop and my iphone can "see" a server in Luton when using a wireless broadband (I get 20 Mbps download speed) but my ipad can not see this server and finds one in Milton Keynes which gives me 0.37 download speed.

4.x iplanet directory server to Sun One Directory Server 5.2

Migating from old 4.x iPlanet Directory Server to new Solaris 9 server with Sun One Directroy Server 5.2.
I want to know how to re-connect our existing Web page interfaces to the 4.x directory server which employs CGI scripts, dosearch, edit, modify.. etc.
The old Directory Server version is described at http://docs.sun.com/db/doc/816-6681-10
Our new Directory Server is at http://docs.sun.com/source/816-6400-10/jdgw.html

Migating from old 4.x iPlanet Directory Server to new Solaris 9 server with Sun One Directroy Server 5.2.
I want to know how to re-connect our existing Web page interfaces to the 4.x directory server which employs CGI scripts, dosearch, edit, modify.. etc.
The old Directory Server version is described at http://docs.sun.com/db/doc/816-6681-10
Our new Directory Server is at http://docs.sun.com/source/816-6400-10/jdgw.html

10.7.5 Server - AFP Userdirectorys, one iMac & one MBA per User, practicable?

Similar Messages

Maybe you are looking for