10.8.3 can't set to display 720p 60hz on my hdmi setup.

Hi all, will greatly appreciate if I can get some solutions from the forum community here.
I just upgraded my mbp from 10.6.8 to 10.8.3. Most of the time I'm required to connect this comp to a hdmi cable and out to a black magic intensity pro card for secondary screening presentation purpose.
The hdmi display settings that is required for this to work is 720p 60hz.
Now in 10.8.3 I can only choose 60hz (NTSC) and not just 60hz itself anymore.
I'm pretty sure on the previous version 10.6.8 I can choose 60hz or 60hz (NTSC) and I can't after upgrading.
Now, whenever mirror settings is on, I change from 1080 to 720p 60hz (NTSC) under hdmi and when I click off on the mirror settings, it seems the secondary display screen return back to 1080 and not stay at 720.
It wasn't like this before. I've encountered this issue previously on 10.6.8. There's a drop down section on the refresh rate selection. We tried 60hz (NTSC) and it didn't work. Until a random click on just 60hz made the secondary screen projected out.
How am I able to maintain the hdmi secondary screen to 720p 60hz or how am i able to select 60hz and not 60hz (NTSC) after changing it from 1080 which is the default settings ?
Marco.

Double-check your preferred and alternate DNS server in the EWS.  I will include a sample photo and instructions on how to set a static IP for an Officejet printer.  It isn't your exact model but it should be the same instructions.
Type only the numbers of your printer's IP address into a web browser and if you see information about your printer then you are successfully in the printer's embedded web server (EWS). You know how to do this but I thought I would include this just in case.
Select the "Network" tab and under the word Wireless on the left hand side you will see IPv4 if your printer is setup wirelessly. 
Click on IPv4 and then highlight the circle to the right that says Manual IP. Next, select the gray button below that says "Suggest a Manual IP Address."  This will fill in most of the boxes for you to eliminate the risk of user error.  This will change your IP address so feel free to keep the new IP address or change the top row back to the first number you entered into the web browser to start with.
At the bottom of this page you have a preferred and alternate DNS server.  The preferred DNS server should say 8.8.8.8 and the alternate DNS server should say 8.8.4.4.  
Reboot the printer with the power button after clicking "Apply" to help complete the process.  After doing so you should have connectivity to the server.  Press the ePrint button on the printer after the printer turns back on and let me know if you still have that error on your printer.  
Don't forgot to say thanks by giving "Kudos" if I helped solve your problem.
When a solution is found please mark the post that solves your issue.
Every problem has a solution!

Similar Messages

  • Can't set Main Display

    Hi
    I have just connected up my new MacPro. I am using 2 displays - 1 DVI and 1 VGA. The DVI display needs to be my main display but nomatter how I connect them the VGA display ends up as the main display. I have looked in Display System Prefs and for an nVidia pref app (I have the 7300GT) but can't find anything by which to set which display I wany as main.
    I'm sure there is a dead obvious answer but I can't find it!
    Thanks

    Did you go to the Arrangement tab (I think that's what it's called) in the Displays System Preference and drag the menubar item/symbol that's presumeably on your VGA display to your DVI display? This is probably all you need to do.

  • Can I use Dual Displays with New Mac Mini (HDMI   Thunderbolt)

    Hello Everyone,
    This question may have been asked before... but I just purchased a beautiful new Mac mini and it has an HDMI port in the back and a Thunderbolt port.  I am using a new DELL 23" HDMI monitor that also accepts DVI.   I think I could run another monitor on the Mac Mini, but I don't know which is the best way to go... I purchased a mini-display port to DVI adapter because I heard thunderbolt could accept the mini-display cable.
    1.  Should I purchase the other identical Dell monitor and then run it on Thunderbolt 2 DVI and run it DVI
    2.  Or is there a HDMI splitter that splits the signal into two cables and go that way?
    Any advice would be greatly appreciated  Thanks!

    I just got the mini server and run a 24" LCD off the HDMI port and a 19" off the displayport (adapter to DVI) and it works a treat there's no need for any splitter.

  • Trying to create a book and have sorted 900 photos in manual order...the book application resorts my photos and i have to search 900 photos each time. how can i set the sorting

    trying to create an Aperture book and have sorted 900 photos in manual order...the book application resorts my photos and i have to search 900 photos each time to place a photo. how can i set the sorting to stay in my manual setup?

    1.  If you manually sort Images in a Project, and then create a new Book w. "Include selected Images" checked, your manual sort order will be preserved.
    2.  As a workaround for when you have already created a Book, batch rename your Images with a leading index or counter after setting the order manually.  You'll have to create a Naming Preset, e.g.: "{Index}_{Version Name}".  The renaming should go in the order that you selected the Images, so be sure to select the first one first, and then use "Edit→Select all" to extend the selection to all Images.  Once the Images are in your Book, a sort on Version Name should be the same as the manual sort you created.
    3.  At the risk of stating the obvious, you could create the Book, import the Images, and then sort them.  The Book -- it is, to Aperture, just a special kind of Album -- retains its own manual sort order.  I recommend using Albums this way.  Use Projects to cull and develop Images, and use Albums for output.  Sorting for a Book (or any output) is better done in the container devoted to that output (and not in the Project, which is more general).
    Message was edited by: Kirby Krieger -- added #3.

  • Can you set up apple tv from cable box HMDI to apple tv box?

    Can you set up apple tv using cable box HDMI to Apple tv box if your tv has no HDMI slot?

    No

  • How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

    I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side.  E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

  • I just purchased a Thunderbolt Display for use with Photoshop work.  How can I set up to show/work in separate programs on each screen?

    I just purchased a Thunderbolt Display as an additional screen for Photoshop work.  Following set up instructions appears to allow only mirroring of the screens.  How can I set up to show/work in separate programs on each screen? 

    Yes, each blue rectangle is a screen. You can create different geometries, to suit your needs. For example, you can even make this kind of thing... :
    Or this:
    I don't know why you would want to do that, but you can!

  • Can't set 'Blank' on Second display

    I've found that I can't set the second display to be plain blank, it still shows images the same as if it was set to 'Alternate'. I can set it to Desktop, but I prefer it to be plain black at times and not be a distraction.
    Anybody else got this?
    (yes, I've sent a feedback)

    The implementation of dual display modes is ... indecipherable. It works, it just doesn't work in a way that I've been able to make sense of. The modes themselves are odd, the times when one can access the modes are odd, the changes in both of those betw. regular (windowed) and full-screen behavior are odd, and don't even start to think about how Aperture handles dual displays when you move the main window to your secondary display.
    Here is what works for me, for "Blank" mode.
    . Keep Aperture on your main display.
    . Keep Aperture in regular (windowed) mode.
    . Change to Browser view (not Split View or Viewer)
    . "View→Secondary Viewer (note the wording!)→Blank" should now be available. Select it. Your second monitor should go blank (mine shows an 18% gray, but that could be my desktop setting).
    Here's where it gets exciting. If you select an image in the Browser, the secondary viewer (usually) stays blank. If you double-click and change to Viewer mode, the secondary viewer stays blank. If you now double-click and return to browser mode, the selected image is shown on the secondary viewer even though "View→Secondary Viewer→Blank" is still selected. Press "v" to change to Split view, and the secondary viewer returns to a blank display. As long as you alternate betw. Viewer and Split views, the secondary viewer will remain blank. As soon as you switch to Browser, the selected images will show on the secondary viewer.
    The take-away is
    1. "Blank" doesn't really work, and
    2. If the selections for Secondary Viewer are grayed-out, change to Browser view and try them again.

  • HT3924 Can I set up more than one monitor/displays to my Macbook Pro?

    Can I set up more than one monitor/displays to my Macbook Pro?

    OSX Maveric 10.9.1.  I have a 2.9 GHz Intel Core i7 with 8GB memory.  I like the new things I can do with maveric.  I have conected only one external monitor through the thinderbol conecting cable to VGA or HDMI.  I would like to conect 2 monitors and still use the laptop display ( total of three monitors). Can I do that?

  • I noticed that Lightbeam has site prefrences displayed but they are grayed out. Can I set these myself?

    The new program Lightbeam, which displays site you intentionally visit as well as third-party sites where you were sent. On the list screen, there is a section that said "site preferences" but they appear greyed out. Can I set these myself?

    If you select one or more of the Sites listed you are provided with four settings: "Block Site", "Hide Site", "Watch Site" and "Clear Preference".
    So in order to access theese buttons you first need to select on or more sites.
    I hope this helps.

  • As an administrator can I set a time limit and control having inappropriate sites displayed on my "administrator" usage?

    as an administrator can I set a time limit and control having inappropriate sites displayed on my "administrator" usage?

    Parental Controls can be used to set time limits, to allow the computer to be used only within specific hours of the day, and to block certain Web sites (or to allow only certain Web sites). However, they can be applied to a Standard account only, not to an admin account.

  • T500- Can't set display to max resolution of 1680 x 1050

    I bought a T-500 with Windows 7 professonal x64. Max resolution of the screen I can set is 1280x800. But it should have option 1680 x 1050.
    Tried via Intel general settings but it says this 1680 x 1050 option already excists, but I have no possibillity to switch to this format.
    How can I set this 1680x 1050 resolution?
    Hope someone can help.
    Thank you.
    Vintiem

    what is the model number of your T500? xxxx-xxx
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Can you set a "default" web page in a KM folder?

    Hi there,
    I've been playing around with using Adobe Contribute to edit web pages in a CM Repository. It was easy to create a CM repository, put some web pages and supporting CSS, images etc. in there, and create a KM navigation iView that displays the default page. Setting up Adobe Contribute to edit those pages via a WebDAV protocol was simple too, and to be honest I find the Contribute interface and functionality easier to use (particularly from the average end user's point of view) and implement than the Portal's built-in HTML editor, or the Web Page Composer.
    But then I ran into a snag. In order to be able to "administer" the site with Contribute (or Dreamweaver), it creates an _mm folder and puts a "guard" page in it. The guard page is a file which would be returned to the browser when it tries to access a folder. In a normal website that would be a "default" page (e..g index.htm, default.htm etc.), but in the Portal there doesn't seem to be a way to have one. I believe that's why if you try to access a folder through a browser you get:
    "The folder you are looking for has no displayable content.
    You can try one of the following:
    Access the folder using the Navigation user interface.
    Access the folder as a Web folder. Your operating system and browser dictate whether or not this will work."
    That's what happens if I use something like http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/ as a URL, though http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/default.htm works just fine (as you would expect). And I can retrieve a fake "guard" page using http://<host name>:<port number>/irj/go/km/docs/<repository prefix>/<folder name>/_mm/default.htm
    An Adobe technote confirms this as problem - [Guard Page not found|http://go.adobe.com/kb/ts_f3675780_en-us]. Does any one know if a default page can be set in a CM repository.
    Regards,
    Tom

    I don't think you can.
    What is possible is to set content on the folder resource itself; that would be returned instead of the page you mentioned.

  • 2 New Ipads (Retina and Mini)(New to Apple) How do I share purchased apps, but others have each act independently? Mini is for the Wife the Ipad4? is for me. I want to use mine at work, etc. She's home with the kids. Can we set them up seperate, but share

    2 New Ipads (Retina and Mini)(New to Apple) How do I share purchased apps, but others have each act independently? Mini is for the Wife the Ipad4? is for me. I want to use mine at work, etc. She's home with the kids. Can we set them up seperate, but share
    --break--
    So we are entirely new to Apple products. I'm an IT guy, but have always been a windows user.
    So the Ipad with Retina Display is to be mine (and will use it at work for notes, organization, etc)
    The MINI is for the wife.
    But, are we allowed and can we.. buy an app and share that app between both devices? IE. Can I buy a copy of Angry Birds for the House and both Ipad's use that single purchase? and if so, can we still run the Ipads seperate other than to share the apps purchased. IE my facebook and email set up on mine and hers on her ipad mini?
    When I finally find a note taking app I like, can I share it on her ipad, without her having all my work files, etc?
    Thanks for helping out the apple noob. Hoping for a great experience, and anticipate droping $100 in apps the first day.. just don't want to do that twice. If this is against the usage policy, thats unfortunate but good to know. (I mean we can share stuff on PC as long as its in the same household)
    thanks again (explanations or links are fine)

    There are a number of Apple services: iMessage, FaceTime, iCloud, Game center, Find My iPad, etc.
    Now, to share apps, music and books you need to have the same Apple ID:
    iPad's Settings > iTunes & App Stores > Apple ID > Your purchasing Apple ID.
    For the other service, your wife should have her own Apple ID.
    All she needs is a valid e-mail address, apply Apple ID below:
    https://appleid.apple.com
    Here's a limk with useful tips: Note: It's also valid in IOS 6
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family

  • How can i set the alternating colors for a table rows

    Dear All,
    Please any one help me how can i set the Alternating colors for Table Rows.
    i created a theam there i set the background alternating color to brown and i set the table design properity to alternating. but it is not reflecting.

    Hi,
    The design property in Table properties should work for your requirement. Select "alternating" value for design.
    Please see the API below:
    design
    Determines the appearance of the table. The property design can take the following values and is represented by enumeration type WDTableDesign.
    alternating - The table rows are displayed alternately in a different color.
    standard - The table background has one color. The individual table rows are displayed with grid net lines.
    transparent - The table background is transparent. The individual table rows are displayed without grid net lines.
    Check whether you have changed the right property or not? Also table should contain more than one rows to test this scenario.
    Regards,
    Jaya.
    Edited by: VJR on Jun 17, 2009 6:43 PM

Maybe you are looking for