10+ GB files created in private folder, aslmanager using 94% CPU, HELP!

My computer seemed to be running ok, but huge chunks of disk space kept dissappearing, until when I knew I ought to have at least 11 GB open on the drive, I started getting pop up dialogue boxes warning of no more drive space available for application memory or that sort of thing. Trying to track the problem down I got Onyx and used it to be sure all daily, monthly, and weekly scripts had run. That didn't affect these files, either in size or number. I also ran the cleaning protocols - that didn't help much at all. A couple of times chunks of disk space would magically reappear, up to 2 or 3 GB, but then the space would very very rapidly disappear again.
Then I got a program called "Grand Perspective" that maps your drive, and found huge private/var/log/asl files that were up to 5 GB, and, yes, I do mean these files are Gigabite, in size, not MB.
After using console to see the last 16 MB of a couple of these files, and not being able to tell anything from them other than that the dates from a log file dated 2010.10.16.asl was showing entries from Feb & Mar, which seemed very odd... Anyhow, I deleted all but the last day of those log files (one of those I did NOT delete was over 1.5 GB).
I also found and deleted a private/var/log/daily.out file that was over 5 GB.
I did not delete the private/var/log/asl files with different names than those with dates. In other words, I did NOT delete (today's size shown for each) 2010.11.15.asl at 553MB, 2010.11.15.U501.asl at 1.72 GB, LongTTL.asl at 1.2 MB, LongTTL.UO.asl at 8 KB, StoreData at 4Kb, SweepStore at 0Kb.
Before deleting all of the previous private/var/log/asl dated files, the computer was for the most part running fine, but had run out of free disk space when I knew it ought to have had at least 11 GB open (e.g., >10% of the drive) - so it kept hanging up, I'd free up a few hundred MB with Onyx, reboot a few times, etc., and it'd just fill up and hang again in no time....
After deleting those files, I had over 17 GB free disk space and I rebooted. I believe I then ran onxy both maintenance and cleaning functions.
Now computer is hanging, and/or firefox is hanging or very slow to respond. Space was rapidly disappearing again. Using Grand Perspective again late this morning, I discovered a new file, private/tmp/periodic.vNHob2vCOj created at 3:15 am, that was already over 7.5 GB. Within an hour it was over 8.5 GB, and now it is over 10.5 GB, and I'm down to 11 GB available disk space. Yesterdays asl log files (the huge ones) are still there, along with two new and reasonably small ones for today.
So when the computer and/or firefox starts hanging, and the fans really rev up (which is happening very frequently today) I opened the activity monitor. It seems that the fans aren't always rev'ing when its hanging, but often are or begin to shortly after the computer drastically slows down - and I hadn't noticed this before I deleted all those large files.
From the activity monitor, it seems that the aslmanager is using up to as high as 88% or more of my CPU that I've seen so far. Even when the CPU use is down around 3 or 4%, it may be using as much as over 1.18 GB real memory, and AT THE SAME TIME 1.8 GB (yes, gigabite!) of virtual memory.
I tried quitting firefox to see if that made any difference, but even then the aslmanager is still using massive amounts of CPU and memory.
Syslog is also periodically using as high as 94% of CPU that I've seen, although this seems much less common than the aslmanager problem.
I sampled or used console to copy some of the text in that daily.out file before I deleted it. I also sampled the syslog when it was using 68% of CPU, and the aslmanager when it was using either a lot of CPU or memory or both, I don't recall which for sure. I also used console to display the last 16 MB of that private/tmp/periodic.vNHob2vCOj file and copy it to an rtf file.
I can of course post parts of any of these if it would help determine what is causing this problem.
As you can imagine, I'm desperate to know what in the world is going on here and how to fix it!!! I would be incredibly grateful for your help in resolving this problem.

I may have inadvertently fixed the problem. The one file had grown to over 12.5 GB, so I was going to try the sudo commands listed in this article: http://reviews.cnet.com/8301-13727_7-10329979-263.html and then delete that file. The commands didn't seem to work - both aslmanager and syslogd were still showing in the activity monitor and it didn't create a temp file on the desktop. I thought perhaps because the friend who gave me this computer left the admin password blank, so I went to change it to a real password. In the process the computer completely hung, so I rebooted. That 12 GB file is gone, at least so far and I haven't heard the fans (have only been back up for a few minutes tho so we'll see).
Even so, going to console as you suggested - it looks like tons of aslmanager lines, but I haven't got a clue what it was doing, perhaps you can tell? For future reference... I have no idea how much of this is after it hung completely and I had to hold down the button to force it to shutdown, and then I rebooted...so apologies for copying more here than probably is needed:
Nov 16 15:41:41 ip68-108-69-78 aslmanager[2289]: aslmanager(2289) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 15:41:41 ip68-108-69-78 aslmanager[2289]: aslmanager(2289) malloc: * mmap(size=3778068480) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 15:45:48 ip68-108-69-78 /usr/sbin/spindump[2352]: process 2313 is being monitored
Nov 16 15:46:02 ip68-108-69-78 /usr/sbin/spindump[2352]: process 2313 is being no longer being monitored
Nov 16 15:47:43 ip68-108-69-78 com.apple.aslmanager[2289]: aslmanager(2289) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 15:47:43 ip68-108-69-78 aslmanager[2289]: aslmanager(2289) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 15:47:43 ip68-108-69-78 com.apple.aslmanager[2289]: * error: can't allocate region
Nov 16 15:47:43 ip68-108-69-78 com.apple.aslmanager[2289]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 15:48:52 ip68-108-69-78 ReportCrash[2354]: Formulating crash report for process aslmanager[2289]
Nov 16 15:48:53 ip68-108-69-78 com.apple.launchd[1] (com.apple.aslmanager[2289]): Exited abnormally: Segmentation fault
Nov 16 15:48:53 ip68-108-69-78 ReportCrash[2354]: Saved crashreport to /Library/Logs/CrashReporter/aslmanager2010-11-16-154852Macintosh-4.crash using uid: 0 gid: 0, euid: 0 egid: 0
Nov 16 16:02:29 ip68-108-69-78 /usr/sbin/spindump[2370]: process 2369 is being monitored
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 16:08:31 ip68-108-69-78 aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: * error: can't allocate region
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: * error: can't allocate region
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=3778068480) failed (error code=12)
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: * error: can't allocate region
Nov 16 16:08:31 ip68-108-69-78 com.apple.aslmanager[2355]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:08:31 ip68-108-69-78 aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:08:31 ip68-108-69-78 aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=3778068480) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:12:52 ip68-108-69-78 aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:12:53 ip68-108-69-78 com.apple.aslmanager[2355]: aslmanager(2355) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 16:12:53 ip68-108-69-78 com.apple.aslmanager[2355]: * error: can't allocate region
Nov 16 16:12:53 ip68-108-69-78 com.apple.aslmanager[2355]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:13:44 ip68-108-69-78 ReportCrash[2380]: Formulating crash report for process aslmanager[2355]
Nov 16 16:13:44 ip68-108-69-78 com.apple.launchd[1] (com.apple.aslmanager[2355]): Exited abnormally: Segmentation fault
Nov 16 16:13:44 ip68-108-69-78 ReportCrash[2380]: Saved crashreport to /Library/Logs/CrashReporter/aslmanager2010-11-16-161343Macintosh-4.crash using uid: 0 gid: 0, euid: 0 egid: 0
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 16:34:11 ip68-108-69-78 aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: * error: can't allocate region
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: * error: can't allocate region
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=3778068480) failed (error code=12)
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: * error: can't allocate region
Nov 16 16:34:11 ip68-108-69-78 com.apple.aslmanager[2386]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:34:11 ip68-108-69-78 aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:34:11 ip68-108-69-78 aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=3778068480) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:39:52 ip68-108-69-78 aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 16:39:52 ip68-108-69-78 com.apple.aslmanager[2386]: aslmanager(2386) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 16:39:52 ip68-108-69-78 com.apple.aslmanager[2386]: * error: can't allocate region
Nov 16 16:39:52 ip68-108-69-78 com.apple.aslmanager[2386]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 16:41:23 ip68-108-69-78 ReportCrash[2407]: Formulating crash report for process aslmanager[2386]
Nov 16 16:41:23 ip68-108-69-78 com.apple.launchd[1] (com.apple.aslmanager[2386]): Exited abnormally: Segmentation fault
Nov 16 16:41:23 ip68-108-69-78 ReportCrash[2407]: Saved crashreport to /Library/Logs/CrashReporter/aslmanager2010-11-16-164122Macintosh-4.crash using uid: 0 gid: 0, euid: 0 egid: 0
Nov 16 16:44:13 ip68-108-69-78 SoftwareUpdateCheck[2410]: Checking for updates
Nov 16 16:45:29 ip68-108-69-78 SoftwareUpdateCheck[2410]: Downloading "Security Update 2010-007"
Nov 16 16:48:31 ip68-108-69-78 SoftwareUpdateCheck[2410]: Auto-download of "Security Update 2010-007" SUCCESSFUL.
Nov 16 16:48:31 ip68-108-69-78 SoftwareUpdateCheck[2410]: Downloading "iTunes"
Nov 16 16:49:01: --- last message repeated 2 times ---
Nov 16 16:49:36 ip68-108-69-78 SoftwareUpdateCheck[2410]: Downloading "iTunes"
Nov 16 16:49:38 ip68-108-69-78 SoftwareUpdateCheck[2410]: Auto-download of "iTunes" SUCCESSFUL.
Nov 16 16:49:40 ip68-108-69-78 Software Update[2420]: arguments=(null)
Nov 16 16:50:04 ip68-108-69-78 /usr/sbin/spindump[2424]: process 2420 is being monitored
Nov 16 16:50:24 ip68-108-69-78 com.apple.launchd[82] ([0x0-0xdb0db].SoftwareUpdateCheck[2410]): Exited with exit code: 102
Nov 16 17:02:20 ip68-108-69-78 aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 17:02:20 ip68-108-69-78 aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:02:20 ip68-108-69-78 aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=3778068480) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: * error: can't allocate region
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: * error: can't allocate region
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=3778068480) failed (error code=12)
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: * error: can't allocate region
Nov 16 17:02:20 ip68-108-69-78 com.apple.aslmanager[2409]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:07:41 ip68-108-69-78 aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:07:41 ip68-108-69-78 com.apple.aslmanager[2409]: aslmanager(2409) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 17:07:41 ip68-108-69-78 com.apple.aslmanager[2409]: * error: can't allocate region
Nov 16 17:07:41 ip68-108-69-78 com.apple.aslmanager[2409]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:08:58 ip68-108-69-78 ReportCrash[2439]: Formulating crash report for process aslmanager[2409]
Nov 16 17:08:58 ip68-108-69-78 com.apple.launchd[1] (com.apple.aslmanager[2409]): Exited abnormally: Segmentation fault
Nov 16 17:08:58 ip68-108-69-78 ReportCrash[2439]: Saved crashreport to /Library/Logs/CrashReporter/aslmanager2010-11-16-170857Macintosh-4.crash using uid: 0 gid: 0, euid: 0 egid: 0
Nov 16 17:30:17 ip68-108-69-78 /usr/sbin/spindump[2463]: process 2313 is being monitored
Nov 16 17:30:58 ip68-108-69-78 /usr/sbin/spindump[2463]: process 2313 is being no longer being monitored
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 17:33:53 ip68-108-69-78 aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: * error: can't allocate region
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: * error: can't allocate region
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=3778068480) failed (error code=12)
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: * error: can't allocate region
Nov 16 17:33:53 ip68-108-69-78 com.apple.aslmanager[2446]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:33:53 ip68-108-69-78 aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:33:53 ip68-108-69-78 aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=3778068480) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:36:40 ip68-108-69-78 /usr/sbin/spindump[2468]: process 2313 is being monitored
Nov 16 17:37:05 ip68-108-69-78 /usr/sbin/spindump[2468]: process 2313 is being no longer being monitored
Nov 16 17:37:24 ip68-108-69-78 /usr/sbin/spindump[2468]: process 105 is being monitored
Nov 16 17:37:25 ip68-108-69-78 /usr/sbin/spindump[2468]: process 105 is being no longer being monitored
Nov 16 17:43:22 ip68-108-69-78 aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 17:43:22 ip68-108-69-78 com.apple.aslmanager[2446]: aslmanager(2446) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 17:43:22 ip68-108-69-78 com.apple.aslmanager[2446]: * error: can't allocate region
Nov 16 17:43:22 ip68-108-69-78 com.apple.aslmanager[2446]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 17:44:33 ip68-108-69-78 ReportCrash[2475]: Formulating crash report for process aslmanager[2446]
Nov 16 17:44:34 ip68-108-69-78 com.apple.launchd[1] (com.apple.aslmanager[2446]): Exited abnormally: Segmentation fault
Nov 16 17:44:34 ip68-108-69-78 ReportCrash[2475]: Saved crashreport to /Library/Logs/CrashReporter/aslmanager2010-11-16-174433Macintosh-4.crash using uid: 0 gid: 0, euid: 0 egid: 0
Nov 16 17:56:42 ip68-108-69-78 com.apple.launchd[82] (0x10a9e0.Locum[2486]): Exited: Terminated
Nov 16 18:03:26 ip68-108-69-78 aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 18:03:26 ip68-108-69-78 aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: * error: can't allocate region
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: * error: can't allocate region
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=3778068480) failed (error code=12)
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: * error: can't allocate region
Nov 16 18:03:26 ip68-108-69-78 com.apple.aslmanager[2476]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 18:03:26 ip68-108-69-78 aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=3778068480) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 18:06:24 ip68-108-69-78 /usr/sbin/spindump[2499]: process 2313 is being monitored
Nov 16 18:07:26 ip68-108-69-78 /usr/sbin/spindump[2499]: process 2313 is being no longer being monitored
Nov 16 18:07:44 ip68-108-69-78 /usr/sbin/spindump[2499]: process 2313 is being monitored
Nov 16 18:08:02 ip68-108-69-78 /usr/sbin/spindump[2499]: process 2313 is being no longer being monitored
Nov 16 18:08:24 ip68-108-69-78 /usr/sbin/spindump[2499]: process 2313 is being monitored
Nov 16 18:08:30 ip68-108-69-78 /usr/sbin/spindump[2499]: process 2313 is being no longer being monitored
Nov 16 18:11:16 ip68-108-69-78 com.apple.launchd[82] ([0x0-0xd00d0].org.mozilla.firefox[2313]): Exited: Terminated
Nov 16 18:13:03 ip68-108-69-78 quicklookd[2507]: [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest <a class="jive-link-external-small" href="file://">file://localhost/Users/***/Sites/index.html>'
Nov 16 18:13:08 ip68-108-69-78 login[2513]: USER_PROCESS: 2513 ttys000
Nov 16 18:13:30 ip68-108-69-78 Finder[105]: [QL ERROR] Generator database update takes too long... we will use what we currently have
Nov 16 18:13:41: --- last message repeated 1 time ---
Nov 16 18:13:41 ip68-108-69-78 aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=4294901760) failed (error code=12)\n* error: can't allocate region\n* set a breakpoint in mallocerrorbreak to debug
Nov 16 18:13:41 ip68-108-69-78 com.apple.aslmanager[2476]: aslmanager(2476) malloc: * mmap(size=4294901760) failed (error code=12)
Nov 16 18:13:41 ip68-108-69-78 com.apple.aslmanager[2476]: * error: can't allocate region
Nov 16 18:13:41 ip68-108-69-78 com.apple.aslmanager[2476]: * set a breakpoint in mallocerrorbreak to debug
Nov 16 18:14:32 ip68-108-69-78 GrandPerspective[2524]: Scanning entire volume / [Macintosh HD].
Nov 16 18:14:32 ip68-108-69-78 GrandPerspective[2524]: Allocating tree in default memory zone.
Nov 16 18:14:45 ip68-108-69-78 ReportCrash[2528]: Formulating crash report for process aslmanager[2476]
Nov 16 18:14:45 ip68-108-69-78 com.apple.launchd[1] (com.apple.aslmanager[2476]): Exited abnormally: Segmentation fault
Nov 16 18:14:45 ip68-108-69-78 ReportCrash[2528]: Saved crashreport to /Library/Logs/CrashReporter/aslmanager2010-11-16-181445Macintosh-4.crash using uid: 0 gid: 0, euid: 0 egid: 0
Nov 16 18:19:34 ip68-108-69-78 /usr/sbin/ocspd[2535]: starting
Nov 16 18:19:35 ip68-108-69-78 Help Viewer[2534]: Error trying to read /Users/***/Library/Caches/com.apple.helpui/Activity Monitor Help/ActivityMonitorHelp.helpindex.temporary: * -initForReadingWithData: nil argument
Nov 16 18:20:03: --- last message repeated 6 times ---
Nov 16 18:20:03 ip68-108-69-78 GrandPerspective[2524]: Done scanning: 148064 folders scanned (62 skipped) in 331.12s.
Nov 16 18:31:38 localhost com.apple.launchctl.System[2]: fsck_hfs: Volume is journaled. No checking performed.
Nov 16 18:31:38 localhost com.apple.launchctl.System[2]: fsck_hfs: Use the -f option to force checking.
Nov 16 18:31:43 localhost com.apple.launchctl.System[2]: BootCacheControl: could not open /var/db/BootCache.playlist: No such file or directory
Nov 16 18:31:43 localhost com.apple.launchctl.System[2]: BootCacheControl: could not unlink playlist /var/db/BootCache.playlist: Unknown error: -1
Nov 16 18:31:44 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/machinit.d/airportwps.plist
Nov 16 18:31:44 localhost com.apple.launchctl.System[2]: launchctl: Please convert the following to launchd: /etc/mach_init.d/dashboardadvisoryd.plist
Nov 16 18:31:44 localhost com.apple.launchd[1] (com.apple.blued): Unknown key for boolean: EnableTransactions
Nov 16 18:31:44 localhost com.apple.launchd[1] (com.apple.RemoteDesktop.PrivilegeProxy): Unknown key for boolean: EnableTransactions
Nov 16 18:31:44 localhost com.apple.launchd[1] (com.apple.usbmuxd): Unknown key for boolean: EnableTransactions
Nov 16 18:31:44 localhost com.apple.launchd[1] (org.cups.cupsd): Unknown key: SHAuthorizationRight
Nov 16 18:31:44 localhost com.apple.launchd[1] (org.ntp.ntpd): Unknown key: SHAuthorizationRight
Nov 16 18:31:44 localhost com.apple.launchd[1] (org.x.privileged_startx): Unknown key for boolean: EnableTransactions
Nov 16 18:31:46 localhost kernel[0]: family specific matching fails
Nov 16 18:31:46 localhost kextd[10]: 433 cached, 0 uncached personalities to catalog
Nov 16 18:31:46 localhost kernel[0]: UHCI Root Hub Simulation: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: IR Receiver: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: UHCI Root Hub Simulation: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: IOUSBWirelessControllerDevice: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: EHCI Root Hub Simulation: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: Built-in iSight: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: Matching service count = 14
Nov 16 18:31:46 localhost kernel[0]: Previous Shutdown Cause: 3
Nov 16 18:31:46 localhost kernel[0]: IOUSBInterface: family specific matching fails
Nov 16 18:31:46: --- last message repeated 1 time ---
Nov 16 18:31:46 localhost kernel[0]: Apple Internal Keyboard: match category IODefaultMatchCategory exists
Nov 16 18:31:46 localhost kernel[0]: Touchpad: match category IODefaultMatchCategory exists
Nov 16 18:31:46 localhost kernel[0]: IOUSBInterface: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: Apple Internal Keyboard: match category IODefaultMatchCategory exists
Nov 16 18:31:46 localhost kernel[0]: AppleTyMCEDriver::probe(MacBookPro1,1)
Nov 16 18:31:46 localhost kernel[0]: AppleTyMCEDriver::probe fails
Nov 16 18:31:46 localhost kernel[0]: display: family specific matching fails
Nov 16 18:31:46 localhost kernel[0]: IOUSBInterface: family specific matching fails
Nov 16 18:31:47: --- last message repeated 1 time ---
Nov 16 18:31:47 localhost com.apple.kextd[10]: 16AtherosInterface is not compatible with its superclass, 16IO80211Interface superclass changed?
Nov 16 18:31:47 localhost kextd[13]: a link/load error occured for kernel extension /System/Library/Extensions/IO80211Family.kext/Contents/PlugIns/AirPortAtheros54 24.kext
Nov 16 18:31:47 localhost kernel[0]: ath_attach: devid 0x1c
Nov 16 18:31:48 localhost kernel[0]: mac 10.3 phy 6.1 radio 10.2
Nov 16 18:31:49 localhost bootlog[38]: BOOT_TIME: 1289961093 0
Nov 16 18:31:50 localhost fseventsd[29]: event logs in /.fseventsd out of sync with volume. destroying old logs. (97853 17 97892)
Nov 16 18:31:50 localhost fseventsd[29]: log dir: /.fseventsd getting new uuid: 8A9E53F0-C08C-42C1-B283-2F44E175ACAA
Nov 16 18:31:50 localhost rpc.statd[20]: statd.notify - no notifications needed
Nov 16 18:31:54 localhost DirectoryService[34]: Launched version 5.8.1 (v514.27)
Nov 16 18:31:56 localhost DirectoryService[34]: Improper shutdown detected
Nov 16 18:31:58 localhost kextd[10]: writing kernel link data to /var/run/mach.sym
Nov 16 18:31:59 localhost /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[25]: Login Window Application Started -- Threaded auth
Nov 16 18:32:00 localhost kernel[0]: yukon: Ethernet address 00:16:cb:a6:4c:a5
Nov 16 18:32:00 localhost kernel[0]: AirPort_Athr5424ab: Ethernet address 00:17:f2:45:da:c8
Nov 16 18:32:00 localhost blued[46]: Apple Bluetooth daemon started.
Nov 16 18:32:05 localhost mDNSResponder mDNSResponder-176.3 (Sep 30 2008 16:59:38)[24]: starting
Nov 16 18:32:06 localhost kernel[0]: AirPort: Link Down on en1
Nov 16 18:32:06 localhost com.apple.usbmuxd[17]: usbmuxd-201 built for iTunesTen on Aug 12 2010 at 17:33:03, running 32 bit
Nov 16 18:32:07 localhost configd[36]: AppleTalk startup
Nov 16 18:32:07 Macintosh-4 configd[36]: setting hostname to "Macintosh-4.local"
Nov 16 18:32:07 Macintosh-4 airportd[53]: AirPort off, bailing - GetPower() = off (0)
Nov 16 18:32:07 Macintosh-4 kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,6d0c,0de1,0200,45e1,4000]
Nov 16 18:32:11 Macintosh-4 configd[36]: subnet_route: write routing socket failed, Network is unreachable
Nov 16 18:32:11 Macintosh-4 /usr/sbin/ocspd[69]: starting
Nov 16 18:32:12 ip68-108-69-78 configd[36]: setting hostname to "ip68-108-69-78.lv.lv.cox.net"
Nov 16 18:32:13 ip68-108-69-78 configd[36]: AppleTalk startup complete
Nov 16 18:32:13 ip68-108-69-78 configd[36]: AppleTalk shutdown
Nov 16 18:32:13 ip68-108-69-78 configd[36]: AppleTalk shutdown complete
Nov 16 18:32:17 ip68-108-69-78 sandbox-compilerd[41]: bootstraplook_up_peruser slow answer, took 11.717081 seconds, shouldn't have taken more then 5
Nov 16 18:32:36 ip68-108-69-78 loginwindow[25]: Login Window Started Security Agent
Nov 16 18:32:38 ip68-108-69-78 authorizationhost[84]: MechanismInvoke 0x12aab0 retainCount 2
Nov 16 18:32:38 ip68-108-69-78 SecurityAgent[86]: MechanismInvoke 0x101600 retainCount 1
Nov 16 18:32:38 ip68-108-69-78 SecurityAgent[86]: MechanismDestroy 0x101600 retainCount 1
Nov 16 18:32:38 ip68-108-69-78 authorizationhost[84]: MechanismDestroy 0x12aab0 retainCount 2
Nov 16 18:32:38 ip68-108-69-78 loginwindow[25]: Login Window - Returned from Security Agent
Nov 16 18:32:38 ip68-108-69-78 loginwindow[25]: USER_PROCESS: 25 console
Nov 16 18:32:39 ip68-108-69-78 com.apple.launchd[1] (com.apple.UserEventAgent-LoginWindow[81]): Exited: Terminated
Nov 16 18:32:39 ip68-108-69-78 com.apple.launchctl.Aqua[91]: launchctl: Please convert the following to launchd: /etc/machinit_peruser.d/RemoteUI.plist
Nov 16 18:32:39 ip68-108-69-78 com.apple.launchd[88] (com.apple.AirPortBaseStationAgent): Unknown key for boolean: EnableTransactions
Nov 16 18:32:39 ip68-108-69-78 com.apple.launchd[88] (org.x.startx): Unknown key for boolean: EnableTransactions
Nov 16 18:32:39 ip68-108-69-78 airportd[53]: AirPort off, bailing - GetPower() = off (0)
Nov 16 18:32:51 ip68-108-69-78 KernelEventAgent[26]: tid 00000000 received VQ_LOWDISK event (4)
Nov 16 18:32:52 ip68-108-69-78 fseventsd[29]: log dir: /Volumes/PHONE/.fseventsd getting new uuid: 89D4642C-EB05-46B5-9AFF-395C0FDF2FD4
Nov 16 18:32:55 ip68-108-69-78 /System/Library/CoreServices/coreservicesd[45]: SFLSharePointsEntry::CreateDSRecord: dsCreateRecordAndOpen(***'s Public Folder) returned -14135
Nov 16 18:33:17 ip68-108-69-78 loginwindow[25]: Unable to resolve startup item: status = -43, theURL == NULL = 1
Nov 16 18:33:21 ip68-108-69-78 mdworker[75]: (Error) SyncInfo: Catalog changed during searchfs too many time. Falling back to fsw search /
Nov 16 18:33:22 ip68-108-69-78 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 06]: CPSGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 16 18:33:22 ip68-108-69-78 /System/Library/CoreServices/SystemUIServer.app/Contents/MacOS/SystemUIServer[1 06]: CPSPBGetProcessInfo(): This call is deprecated and should not be called anymore.
Nov 16 18:33:26 ip68-108-69-78 quicklookd[126]: [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/***/Desktop/AGW Consensus NOT.doc>'
Nov 16 18:33:53 ip68-108-69-78 quicklookd[136]: [QL ERROR] 'Creating thumbnail' timed out for '<QLThumbnailRequest /Users/***/Desktop/downton_abbey.s01E06 si hunt.avi>'
Nov 16 18:34:28 ip68-108-69-78 com.apple.launchd[88] (0x1097d0.Locum[141]): Exited: Terminated
Nov 16 18:37:49 ip68-108-69-78 Dock[105]: [QL ERROR] Generator database update takes too long... we will use what we currently have
Nov 16 18:39:09 ip68-108-69-78 com.apple.launchd[88] (0x109650.Locum[158]): Exited: Terminated
Nov 16 18:41:10 ip68-108-69-78 kernel[0]: AppleYukon2 - en0 link down
Nov 16 18:41:14 Macintosh-4 configd[36]: setting hostname to "Macintosh-4.local"
Nov 16 18:41:53 Macintosh-4 ntpd[15]: sendto(17.151.16.22) (fd=23): No route to host
Nov 16 18:46:30 Macintosh-4 kernel[0]: Ethernet [AppleYukon2]: Link up on en0, 100-Megabit, Full-duplex, Symmetric flow-control, Debug [796d,6d4c,05e1,0200,45e1,4000]
Nov 16 18:46:30 ip68-108-69-78 configd[36]: setting hostname to "ip68-108-69-78.lv.lv.cox.net"
Nov 16 18:47:10 ip68-108-69-78 [0x0-0x1e01e].org.mozilla.firefox[178]: Debugger() was called!

Similar Messages

Large files created in TEMP folder

Hello,
one of our servers reported low disk space and we discovered, that its caused by huge files created in temp folder.
These file names are like C:\Windows\Temp\TMP00000A78405B314E573DA1A0
Process monitor reported, that theyre created by FEP (msmpeng.exe), from 1MB to 1.7GB size ..
Is it normal behavior?
Process monitor
2/8/2014 17:50
50:17.1
System
IRP_MJ_SET_INFORMATION
C:\Windows\Temp\TMP00000A78405B314E573DA1A0
1 048 576
Type: SetEndOfFileInformationFile, EndOfFile: 1 048 576
2/8/2014 17:52
52:50.2
System
IRP_MJ_SET_INFORMATION
C:\Windows\Temp\TMP00000A78405B314E573DA1A0
1 708 720 128
Type: SetEndOfFileInformationFile, EndOfFile: 1 708 720 128
Sincerely,
Vladimir Vaněk

Did you find a resolution for this? I have a server that is doing the same thing and would like to get it cleaned up.
Thanks!
Jeff

Problems creating a new folder when using webmail

Hi, has anyone else out there encountered problems when trying to create a new folder when using webmail ?
It just seems to create a new folder called 'New Folder' and misses out the step that would normally allow you to rename it to a title of your choice.
A whole list of folders called 'New Folder' is about as useful as an ashtray on a motorbike.
It did used to work as I've used it many times in the past.....but then so did a lot of things before the 'new' and 'improved' version of BT Mail came along.
Any help or suggestions gratefully received (apart from the obvious solution, switch to a mail client).
Maybe it needs flagging to the 'techies'......they must be really busy trying to sort out all the so called teething problems.
Solved!
Go to Solution.

What should happen is that when you click on the + for add a new folder a box should appear, somewhere amongst the folder list. (The list is in alphabetical order so if you have a number of folders previous to the letter N it maybe out of view ) .
The box will have the text " New folder-X," ( see below for the explantion for the -X ) you then delete the text, type in the name you want, hit enter and there it is.
If you don't notice the box, possibly because it's off screen further down the list, you then open and close the list, or log out the next time you view the list it, or they, are simply named New folder.
So you now have umpteen " New folders ", here's how to rename them.
Place your cursor on the word New Folder in your folder list, you will see a little box appear with" New folder-X," x being the number of the new folders you have created., eg -0, -1, -2 etc.
Then double click on it, you should then get a larger box with New folder-X.
Delete the text in the box, type in the name you want for the new folder, hit enter there's you newly named folder.

Can Files Created in Flash 8 be used in earlier versions?

Can a file created in Flash 8 be used in Flash Mx?

Flash MX was version 6.
Flash MX 2004 was version 7
(boy, so glad this naming convention went away)
In Flash 8 you can do a save as and select Flash MX 2004
(Flash 7). If you need to go down another
version you need to open it in Flash MX 2004 and do a save as
to Flash MX.
Chris Georgenes
Animator
http://www.mudbubble.com
http://www.keyframer.com
Adobe Community Expert
*\^^/*
(OO)
<---->
bippity wrote:
> Can a file created in Flash 8 be used in Flash Mx?

Direct Archival of Document Files in Public/Private Folder

Dear Experts,
If I create documents using Tcode CV01n or with the customized upload progam, I can see the files in SAY Easy Doc Mgmt only in serach results.
I have to copy the files from search result & give the link in my folder which I have created under Public/Private Folder. If I copy & paste the document file in private/public folder from the serach result, system is creating one more document number internally for the same document file.
To avoid this, How Can I automatically archive the document files directly in my folder which I have created under Public/Private Folder
Thanks for your inputs
Regards
Damodar Pai

Hi,
When u create files using CV01n or any other method in SAP the DIR is created but it is not a part of any Document structure.
But when u create it using EDMS u are creating the document in the public / private folder under som specific folder of ur choice. these folders are nothing but Document structures.
If u want the files created using CV01n to appear in any specific folder then u have to assign it to that specific structure using CV12.
Regards

Create A New Folder??? Please Help!!! :0)

I have just got an iphone 3gs. Im using the mail app that the phone came with. Theres 2 folders in it - In box & Trash.
Is there a way of creating a new folder to move emails into?
I get a lot of emails from my childrens school & I want to create a folder so that I can move the school emails into it & have them altogeter in one place.
Is it posssible to do this?
If anyone can tell me how id be soooooo grateful - Thanks!

You can't create mail folders directly on the phone. Further, to do what you want would require an IMAP account. Sounds like you have a POP account. If so, you can't do such with a POP account.

Private Folder is using most of HD

My Private Folder is nearly 190GB. Almost all of it is in asl folder full of a document called
2009.01.04.U501.asl. Where is this coming from? How can I get rid of it.

Hello captain:
Welcome to Apple discussions.
I did a Google search and the only thing that seems relevant is that asl is an abbraviation for American sign language.
Did you download something in that venue?
Barry

Why not instruct MacOS 10.10 users in creating a new folder to use the wheel icon pull-down menu ...

Your instructions on creating folders aren't correct. for my Mac, saying nothing about having to
Open the Bookmarks pull-down menu
Select 'Unsorted Bookmarks'
Go to the top 'Wheel' icon
THEN you can create a new folder, and other good things
Bit of a pain. Otherwise, Firefox is great!

* Bookmarks created via a click on the star in the location bar are stored by default in the Unsorted Bookmarks folder.
Another click on the blue highlighted star allows to edit the properties and move the bookmark to another folder.
* Bookmarks created via "Bookmarks > Bookmark This Page" (Ctrl + D) are stored at the bottom of the Bookmarks Menu folder.
In the left pane in the Library (Bookmarks > Show All Bookmarks) there are three folders in the "All Bookmarks" folder:
* "Bookmarks Toolbar"
* "Bookmarks Menu"
* "Unsorted Bookmarks"
You can add new bookmarks to one of those three Bookmarks folders, but you can not create a new folder or add bookmarks at the root level ("All Bookmarks") or remove one of the three root folders.
In the Bookmarks Manager you can also create a new folder via the Organize menu.
In the Bookmarks sidebar (Ctrl+B; Cmd+B on Mac) you can do that via the right-click context menu.
There are three main Bookmarks folders and bookmarks can only be created in one of those folders and its sub folders.
* The "Bookmarks Toolbar" folder stores the bookmarks that you see on the Bookmarks Toolbar (Firefox > Options or View > Toolbars).
* The "Bookmarks Menu" folder stores bookmarks that show in the Bookmarks menu and are created via "Bookmarks > Bookmark This Page" or via "Bookmark This Link" in the right-click context menu.
* The "Unsorted Bookmarks" folder stores bookmarks that are created by clicking the star at the right end of the location bar.

ITunes can't find or create the iTunes Folder (in Vista). SOMEBODY HELP ME!

I have installed iTunes in my Windows Vista but i can't run it because it appears an error showing: iTunes can't find or create the iTunes folder. This folder is usually located in My Music Folder.
The problem is that I erased the original folder "my music" from my computer and even if I create another "my music" folder and I put in the iTunes folder, the program doesen't work.
Please help me!
Thanks very much.

The problem is that iTunes uses a registry entry to find the location of the Music folder and it is not correctly set.
Apple offer this help for Windows XP, however it requires a utility called TweakUI and Miscrosoft haven't released a version for Vista. I found this link for an alternative, but I know nothing about it so I don't like to recommend it:
http://www.totalidea.com/content/tweakvi/tweakvi-index.html
As alternative to this you may be able to do the following as a work around:
Hold down the shift key, keep it held down and start iTunes. You should be asked to choose or create a library. Choose create and navigate to where you want your iTunes folder - usually in your Music folder.

Is there a way to create a PRIVATE folder for some of my audiobooks?

Hello,
This might sound cheesy, but I would like to keep some of the audiobooks in my iTunes private and I'm wondering if there's a way of doing it? For example, can I create a second Audiobooks folder and keep there? Is there a way to make that folder password protected, so no one else can look in it?
Any help with this would be appreciated!
Thank you.

Where would I keep my audiobooks?
Your Audiobooks stay where they are.
You can decide which playlists your computer shares, as follows:
Open iTunes Preferences. Click on "Sharing". Instead of having the button "Share entire library" checked, change it to "Share selected playlists" and select only the playlists that you want others to see.

How to make a category required for all files created within a folder

I've defined a category. It has attributes which have been flagged as required.
When I view the properies of a particular workspace (library), the category is shown as available to the workspace. However, the category is not shown as required. And the "required" checkbox is not clickable.
So .. how, from the OCS DHTML applet, do I make a particular category a required category for all files in a folder?

Perhaps the Category Attribute is not marked as "configurable" when it was created. You can check this by "switching into Admin Mode" and drilling down the Categories using "Manage Categories" link. Check if the category attribute is marked as configurable or not.
Ravikiran

Create additional private folder at word startup

on the startup site in word is the recent folder. Is it possible to create a folder (like the recent folder) and put some templates in it?

Hi,
As per your description, I understand that you'd like to create a folder on the Start screen of Word for some templates. If I have misunderstood your concern, please let me know.
You might not be able to create a folder like the recent folder on the left sidebar, but you can enable the
PERSONAL tab on the Start screen, and put all your templates under the location of default personal templates:
Go to FILE>Options>Save>Save documents section
Add the path to the folder where your personal templates are expected to be into the textbox of
Default personal templates location.
Go back to the Start screen, you'll see the PERSONAL tab appears, all your templates will be displayed under it (you even can create subfolder under it).
Hope this helps.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

How do I create a new folder to use for my Outlook 365 mail account? I know with pc all I had to do was to right mouse click.

Wondering how to create new folders for my Outlook 365 mail account. I know with pc all I had to do was to left mouse click.
Any suggestions?

New folder where? If you added the account in Mail app it should of created the folders to store that email automatically.
What email program are you using?

Automatically create user private library

Hi,,
I would like to know if it is possible to automatically create the Private Library in '/<domain>/Users/User-<letter>/' when provisioning a user or if the only possibility is to check the box 'Private Library' at the first user connection to Content Services ?
Was it possible to automatically create the Private Folder in the previous OCS version ?
Thanks for your response.

Hi Don,
I try the sample 1525014 - Sample C# .NET UFL and Localization Formula function. Register it with VS .NET by run install batch file. I can see DotNetSampleClassTestStringLength (name) and DotNetSampleClassTestTranslate (text, sourceLocale, destinationLocale ) under Additional Functions\Com and .NET UFLs (u212com.dll)
When I did my UFL. It didn't success. I have
1. Assigning a Strong-Name Key to the Class Library
2. Adding the Assembly to the Global Assembly Cache
3. Register UFL with VS .NET (using regasm)
It success to adding the assembly to the Global Assembly Cache and register with VS.NET. What is my wrong
Thank
Chaiwat

HT2488 I imported pictures into iPhoto from my iPhone, when trying to find my pictures by clicking on iPhoto Library it is always empty. I had to create a new folder and copy the same exact pics in the new folder just to be able to access them.. help plea

I imported photos into iPhoto from my iPhone, however i cannot access them. When clicking on iPhoto Library where they should be stored the folder is blank but if i open up iphoto from the dock menu they appear. I had to create a new folder just to access them. help please, because making a new folder takes up unnecessary space.

There are many, many ways to access your files in iPhoto: You can use any Open / Attach / Browse dialogue. On the left there's a Media heading, your pics can be accessed there. Command-Click for selecting multiple pics.
(Note the above illustration is not a Finder Window. It's the dialogue you get when you go File -> Open)
You can access the Library from the New Message Window in Mail:
There's a similar option in Outlook and many, many other apps. If you use Apple's Mail, Entourage, AOL or Eudora you can email from within iPhoto.
If you use a Cocoa-based Browser such as Safari, you can drag the pics from the iPhoto Window to the Attach window in the browser.
If you want to access the files with iPhoto not running:
For users of 10.6 and later: You can download a free Services component from MacOSXAutomation which will give you access to the iPhoto Library from your Services Menu.
Using the Services Preference Pane you can even create a keyboard shortcut for it.
For Users of 10.4 and 10.5 Create a Media Browser using Automator (takes about 10 seconds) or use this free utility Karelia iMedia Browser
Other options include:
Drag and Drop: Drag a photo from the iPhoto Window to the desktop, there iPhoto will make a full-sized copy of the pic.
File -> Export: Select the files in the iPhoto Window and go File -> Export. The dialogue will give you various options, including altering the format, naming the files and changing the size. Again, producing a copy.
Show File: a. On iPhoto 09 and earlier: Right- (or Control-) Click on a pic and in the resulting dialogue choose 'Show File'. A Finder window will pop open with the file already selected. 3.b.
b: On iPhoto 11 and later: Select one of the affected photos in the iPhoto Window and go File -> Reveal in Finder -> Original. A Finder window will pop open with the file already selected.

10+ GB files created in private folder, aslmanager using 94% CPU, HELP!

Similar Messages

Maybe you are looking for