100% to 99%

Have noticed if unplug and use till bout 20% then charge fully, the battery says 100%, if leave plugged into to charger after 100%, seems like sometimes when it goes to sleep and is woke up it's all a sudden at 99% and still plugged in. I use it bout every third day on battery power, and let it die then charge it. This is the only way to get it to 100% but only stays there hours.....

I charge it, it reaches 100%... still plugged in at 100% if i let it go to sleep, still plugged in, when i wake it up it's now at 99%...Why? it should still be at 100% plus still plugged in.
No. When the battery is fully charged, charging stops. It doesn't start again until the battery level falls below 95%. That happens even with the adapter plugged in. It happens whenever the battery isn't being charged. One of the properties of all batteries is that they slowly lose their charge with time, regardless of whether they are being used or not. So even with the adapter connected and no power being drawn from the battery, it will slowly drain down to 95%, at which point charging will start again.
It use to charge to 100% and stay there as long as I had plugged in.
No, it never did. It's working now exactly the way it's designed to do, and it always has worked that way.

Similar Messages

I will give $100 to the person who can solve this problem once and for all.

I'm not even kidding, dude. We can do PayPay, I'll mail you a check, whatever you want. That is how frustrating this is, that is how badly I want it fixed, and that is how much overtime I've worked lately thanks to being shorthanded at my place of biz-nass. I'm an hombre of my word, so if you actually come up with a solution that works, the cheddar will be yours. Okay let's hit it.
It's the skipping thing. First 10-12 seconds of a song - every song - will play fine, then iTunes skips, stutters, and basically does the god **** hokey pokey and shakes it all about. It happens most notably with songs that I double-click to play, but I'm pretty much noticing it on any song now after a transition is made. I've been using iTunes for ages and this didn't happen until the upgrade to 7.3. I have poured over these forums for nearly a week, tried every solution offered (even offered one of my own that actually worked for maybe four days before the whole thing started up again) and NOTHING. To save us all some time, here's what I've tried:
- Downgrading. I'll admit I didn't do this correctly at first. I didn't remove everything according to the support guidelines, but I went down to version 6.05 and that did nothing to quell the skipping. I upgraded back up to 7.3 because hey, why not, and attempted the remaining trial fixes. I have since removed both iTunes and Quicktime, step my step according the the guidelines, and not only have I downgraded to my current running version of 7.2, I put both of the programs on my F drive (as opposed to the default C drive), my gigantic bonus internal drive where I typically keep nothing but my giganto music library. I thought putting the app on the same drive as the music might fix things. I thought wrong. Dead wrong. Dead diddly dum iddly wrong.
- Quicktime settings. My settings for Quicktime have always been in safe mode with the output size at 16 bits. So when I saw this "fix" I just rolled my eyes. I used to have that dealio back in the dizzle when iTunes would just get all static-y and skip when I'd open other programs or even just minimize it, so that fix worked for that, but it's nothing compared to this. In simpler terms, that fix is like Superman, and this skipping? The kryptonite. Actually that's probably not a great metaphor, but we've got a ways to go and this is going to get mucho boring if I don't throw some chuckles out there. Ready for fix three? Giddy up!
- Turn off cross-fade? It's never been on. I never really got the appeal of that, and also I think it resulted in some minor skipping back in the d. I also attempted similar fixes like turning off the equalizer, messing with the volume, closing last.fm, REMOVING an old album art retrieval program from back before iTunes got its **** together with album art, ANYTHING that might interfere with playback was turned off, removed, b-slapped, and sent crying home to its moms. Nada.
- Recreating my library. This was the fix I offered someone else, because it actually did the trick for a few days. After an entire night spent reimporting 73 gigs worth of music, it played fine, but I did lose a ton of album art, playcounts, etc, so you can imagine how ****** I was when this wound up not being a permanent fix. I was beyond ******. I was livid. But I was taught in the dojos of my youth to channel my anger into productivity, and instead of sculpting a lovely bonsai tree, I set out to fix this pup once and for all.
- That darn anti-virus! This was the final fix I tried, even though I wasn't using any of the culprit programs listed in the forums as causes of the skipping, and even those offering this as a solution confessed it was pretty hit or miss. But having tried everything else, having resorted to playing my music on MediaMonkey of all things, I figured I'd give it a shot. I used (reason for the past-tense forthcoming) AVG Anti-Virus, Lavasoft AdAware and something called Spyware Doctor that I think just came bundled with XP. I removed all of them. I had just done a virus scan recently to see if that's what was causing this, so I figured I'd be okay until I could redownload them after this fix wound up not working. And it didn't work, so there's that.
There may be a couple of fixes I've tried that I'm forgetting now, since I'm delirious after spending practically every night for the past week trying to fix this problem, while my girlf, Heather, sits and laughs at me while watching Clark and Michael on her MacBook. In fact, she's laughing at the $100 offer as I type this, but I assure you, if you offer a solution that works, the money is as good as yours. If you come up with a workable solution, I'll have to test and make sure it isn't temporary like the recreating my library thing, but I won't leave you hanging once I'm satisfied that it's fixed for good. I know it's unorthodox, perhaps illegal in some states, but I'm desperate here, peeps. The ball is in your court, and I beg you not to give up the rock.
Gateway E-2000 Windows XP

I think the problem lays with Last.fm. I had the same exact problem as you. In your processes screen, end the task "lastfmhelper.exe" Last.fm still scrobbles. The tracks don't skip, although I notice there is still a bit of a lag in the first part of the song - but if you can deal with that, no skipping. I think you will have to end that task everytime you boot up your computer, or uninstall last.fm completely until they fix it; it is a bug in their software, as opposed to iTunes.

Frontrow left running @ 100% after returning to Desktop - bugfix required

Tonight my wife and I were watching iTunes TV Show Videos on our living room TV using her black Macbook with lid closed for about 4-1/2 hrs. I had downloaded these TV videos with iTunes on my PowerMac G5 and shared them to the Macbook. The Macbook was connected to the TV using the Mini DVI to video adapter and a sound connection from headphone jack on Macbook to the TV sound L/R inputs. The Magsafe power was connected all the time. The TV videos played just fine and we paused the Front Row periodically.
When we were done watching the videos I powered off the TV and disconnected the Mini DVI and the sound connections and removed the Magsafe power. I the opened the Macbook lid and the fans started to pick up and make a fair amount of noise.
I launched Terminal.app and launched top to see what was running and found Frontrow was running at around 100% cpu with its resident memory growing at an alarming rate. I watched this for about 5 mins and Frontrow climbed to just over 500 MB with the cpu use still at around 100% all this time.
I used the remote to see if I could get the attention of the Frontrow process that was using 100% cpu and memory bloating but to no avail. The rcd (remote control daemon) process did launch when pressing the remote's Menu button but it did nothing.
I then decided enough was enough and I quit the top display and issued a 'kill 508' where 508 was the Frontrow PID. Frontrow was killed and when using the Remote the Frontrow restarted as it should.
Thought I should post this Frontrow anomaly in case others may be wondering why their Frontrow doesn't quit as it should when returning to the Desktop mode.
I will also send feedback to Apple about this mis-behaving Frontrow.
Anyone else experience this Frontrow behaviour ?

I forgot to mention a couple of things.
The communication for sharing the iTunes TV Videos between the PowerMac G5 and the Macbook was via Airport Express which was located some 25 feet away from the MacBook and the signal strength was at max.
I was also running 10.4.7 on both the PowerMac G5 and the Macbook.
The Macbook is equipped with 2gig RAM also.
No other Apps were running with Frontrow on the Macbook other than iTunes for accessing the PowerMac's shared iTune's Video files.
There was one moment during watching the videos on the TV when sharing stopped. This was because the PowerMac was set to sleep via Energy Saver at 1 hour of zero activity. THis was resolved by waking the PowerMac G5 up and configuring it to never sleep.

E-mails with attachments, mostly photos, are replicating themselves in my inbox, 100 or more at a time. What is causing this and how do I fix it?

It is an intermittent, but a regular-enough-to-be-really-annoying occurrence........when someone sends an e-mail, to which is attached a photo of some kind, or a picture document, it will replicate in my inbox, sometimes 100 or more copies at a time. I delete all of them, empty the trash, and will also go to the Yahoo web version of my e-mail and delete the offending e-mail from there and empty the trash. Sometimes worked. Now that process isn't working, and this particular e-mail just filled up my inbox with over 100 copies of itself, even after the other steps were taken. Can't get any incoming mail.
This log jam of replicated e-mails prevents incoming and new mail from reaching the inbox.
Needless to say, am not too happy about it. What is causing it, and how do I fix it, other than to go to Outlook for my e-mail client....? :0) This, coupled with the constant "not responding" each time I try to send an e-mail, delete items from the "sent" or inbox folders, is really driving me nuts. We have a crappy internet connection, and that is likely part of it, but the "not responding" is not a new thing with Thunderbird, either.
Thanks in advance for any assistance you can provide. I dislike the web version of Yahoo, and don't want to have to switch to that, as it just doesn't meet e-mail needs. Would like to get Thunderbird fixed.

I have not seen your error in either my IE or my chrome. I do note that you are using a "strict" Document Type Declaration.
You might try a transitional DTD, which should be more forgiving than the strict:
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
Other than that, I don't see anything particular (because I don't see the error, either) that would cause the menu to drop vertically instead of horizontally.
Beth

HT200196 iCal reminders are clogging up my computers, iPads and iPhone. When I view the Calendar list in iCal, it seems it has added a new calendar every time an event is added. I have a calendar list that has grown to over 100. How do I remedy this?

My laptop, iPad, and iPhone are being clogged by repeated iCal alerts. Every time an event is added, it seems another Calendar is also added. When I view the Calendar list in iCal, there are over 100...and the number is growing. They can not be deleted with a simple "Select all" or "Delete All" and, when deleted individually, the list quickly grows to huge numbers again rapidly. How do I keep this from happening and eliminate the excessive number of calendars?

The warranty entitles you to complimentary phone support for the first 90 days of ownership.

T410s with extremely poor performance and CPU always near 100% usage

Hi,
I've had my T410s for almost a year now and lately its been starting to get extremely slow, which is odd since it used to be so fast.
Just by opening one program, Outlook, or IE or Chrome, just one window, it will start to get extremely slow and on task manger I can clearly see the CPU usage at 100% or very near.
Also another thing I noticed was the performance index on the processor dropped from 6.8 to 3.6!!!
I did a clean Windows 7 Pro 64Bit install, I have all Windows and Lenovo updates installed and the problem persits
What is happening and what should I do??
Thank you
Nuno

thank you again for your answer,
I've done that but hard drive health is also ok as you can see from the screenshot.
IAt the time of the screenshot I had just fineshed to boot up the laptop and it wasnt hot at all.
I am getting desperate here, I am unable to work with my T410s
Link to picture
Thank you
Nuno
Moderator note; picture(s) totalling >50K converted to link(s) Forum Rules

How to load one report page at a time for heavy reports of over 100 pages.

Three banks merged together and now my reports have to pull massive combined data of all 3 banks. Even after tuning the queries, applying indexs, its taking long to load. A normal report now has over 100 pages.
Do you know if I can just load 1 page at a time and show it to user so the user donot have to wait for all 100 or more pages to load before they can see the whole report...? Kind of spooling...or something.
Thank you.
Edited by: Aditi_Seth on Jul 28, 2010 2:54 PM

I am not aware of a simple solution to set the file name. You need to set the content-disposition, but I don't think this is possible with any of the report parameters. A workaround is to save to save the report as a pdf file (destype=file&desname=myreport.pdf), and then open it in the browser after the report is finished.
About the timeout: this can be set in the repserver conf file (engineResponseTimeOut) or override it in the url with parameter ENGINERESPONSETIMEOUT. It's all in the documentation, so always start your search there!
http://download.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_cla.htm#sthref2775

How can I tell if my phone is only getting a quick charge if it reads charged 100%?

iPhone 5c battery is not holding charge for more than 3-4 hours. It has gone completely dead twice in one day because of it. Battery says 100% at start. Apple Genius Bar help said that I'm only getting a soft charge or a partial charge and that is why the battery runs down so quickly. They recommended replacing my power cords. Problem is, I have charged it on 3 different cords and it doesn't seem to matter.
Took it to Apple store- they wiped it, let it die completely, recharged it to 100% overnight and still had trouble. Took it back, reloaded everything, phone died, let it charge overnight to 100% and today the battery is down to 40% after about 2 hours.

No problem.
If you took it to the Apple store and they troubleshoot it for you and you still have issues.
Better to get another phone.

How can I see more than 100 users when adding users to a node?

When adding new users through the User Management interface, only the
first 100 entries are listed. How do I increase the number of entries
so I can see the next hundred (or more) users? Is this done via the server
configuration parameter maxsearchresult?
<P>
The GUI Add User to Node option was meant for infrequent adds in smaller
environments. In large deployments (more than 100 user adds at a time), you
should be using the command line script "unidsattach". See the Administrators
Guide for more details on the command.
<p>
The parameter, maxsearchresult, is meant to limit the number of users that can
be returned on a search request by the calendar client. For example, if you have
1000's of calendar users and someone tries to search for all of them, this
parameter will make sure that the user is not left waiting a long time for
results.

In Settings > Notification Center, try turning "on" all the six buttons under "Today View". Also turn "on" the top two buttons under "Access on Lock Screen". Doing that should show you "Tomorrow" at the bottom of Noticiation Center.

Transaction type 100 not possible (posting to affiliated company)

Hi All SAP Guru's
I am trying to post asset acquisition through F-90
Asset Dr Transcation Type 100
To, Vendor Cr
while saving the above document i am getting an error Transcation type 100 is not possible (Posting to Affiliated Company)
to explain further my client are using Trading Partner Concept, may be that is the reason document is not getting posted
In Transcation Type I tried to change Post to affiliated Company then system allowing to post the document, but in real sense we should not give post to affiliated company at Transcation Type
can anybody help, is there any alternative to go ahead
Regards
Sreenivasulu
Edited by: sreenivasulu VAS on Feb 26, 2009 1:57 PM

Hi,
When there's a trading partner in the document, you need to use a different transaction type for external acquisition.
Have you tried this? (I've used this one. without chaging document type setting)
150 Acquisition from an affiliated company
Difference from Transaction type 100 is posting type. 150 has a posting type of 'Post to affiliated company' whereas 100 has not.
Check with IMG (T-code: AO73)
Heeseon.

Transaction type 100 not posible (posting to affiliated company)

Hil
While asset acquistion posting in f-90 ia geting error message "Transaction type 100 not posible (posting to affiliated company)"
can you please give solution for this one

Hi
pl check following settings in spro Img->Financial Accounting-Asset Accouning----Transctions--Acquisitions-Define Transaction Types for Acquisitions-in choose activity window -dbl clk on "Define Transaction Types for Acquisitions"
select transaction type 100--click on details--check posting type. if " Do not post to affiliated company." is selected then choose another transaction type which allows acquisition with option "Post to affiliated company"
regards
Vishwas
Edited by: Vishwas_bapat on Mar 24, 2011 1:24 PM

Laserjet pro 100 color mfp m175

We have a number of HP LaserJet Pro 100 Color MFP M175's in our school. They are connected to the network via ethernet cable rather than wirelessly. A number of users print to them either from a Windows XP (running service pack 2) desktop or from a Windows 7 (newly built) laptop. They were working fine for a few days and then all of a sudden they may have any of the following problems:
unsupported personality error printed at the top of a lot of pages (ie you may try and print one page but hundreds of pages come out with this error).
there may be an invalid driver error on the control panel on the printer
there may be weird alien-looking characters at the top of hundreds of blank pages
initially all of the printers had the driver installed that came with the printers, when we started getting the error, we then tried running the diagnostics doctor on the hp web site, which said all the drivers were valid. We have also tried using the universal print driver from the HP support website, but still get the problem after a few days. We can make all of the errors go away by re-installing any of the above drivers, but then the problem starts happening again after a few days. The server is Windows 2003R2 running service pack 2, we have tried installing the drivers on the server too, but they won't install. Another printer was set up this week in the school office which only has people printing from Windows 7 machines and doesn't have the error - this could be because it's too soon to happen yet, or maybe because there are no Windows XP machines printing to it? (It does print through the same server as the others) Help would be greatly appreciated, we are a school and so can't afford to be wasting lots of paper, plus this is taking up all of our time rather than fixing other issues! thanks in advance

Tammy, sounds like there could be a couple things that might cause this issue. The first of which is that the RJ45 cable you are using to connect the printer might have become corrupted. I would replace that cord and see if the issue remains.
Second, I want you to see about updating the firmware from this website :
http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=5076465
If that still presents issues, you can use that same website to download the more recent drivers. I would uninstall the old version you have on the computer and then open that link and install the full feature software.
Let me know how that goes and I will get right back with you!
I hope you are having a wonderful week, and I hope that the weather where you are located is as beautiful there as it is here!
-Spencer

Want to print remotely to my HP LaserJet Pro 100 color MFP M175nw

Hello! I have a
HP LaserJet Pro 100 color MFP M175nw printer in my office. It is connected to my wifi network from the office and i can use it from several laptops from office with no issue.
Now i want to be able to print and scan papers from my home pc also which is connected to my home wifi network.
I found there it is possible to print pages over internet. Except hpeprint option, how can i add printer from office to printer list from my home pc.
Please help me.
Thanks!

Hi Tolick,
Thank you becoming a member of the HP Support community. I understand that you have an HP Laserjet 100 at your office and you would like to be able to print to it when you are at home.
Super_Dave is correct with the solution he gave you. I just wonder if you have set up the ePrint feature of your Laserjet yet and customized the ePrint email address? If you have then using the ePrint software that you installed on your laptop should allow you to print to your office printer from home. The instructions on how to do this are in the HP ePrint Software User Guide on page 16 in the section titled "Use HP ePrint (Windows)".
If you haven't set up the ePrint feature of the printer I have included a two documents for your reference. The first one is how to get the claim code and the second is how to setup the customized ePrint email address. This may the step that is missing to make the ePrint software work for you.
HP ePrint Software User Guide
Getting the Printer Claim Code
Setting Up a Custom Email Address for ePrint
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Problem downloading software for HP Laserjet Pro 100 Color mfp m175nw

The window xp computer recognizes the hp laserject pro 100, but I can not install the software. I tried using the CD, the hp smart intall and installing it from the website. Nothing works. When it says printer found and it reads this my take a few minutes, it is still on 0% and it has been days. We need the software so we can scan. Thanks for the help

Ok, I have a few questions:
1. Do you have Administrative rights on the computer? If so, try right clicking on the installation and choose to run it as administrator.
2. Was the printer, or any other HP printer, previously installed on this computer?
3. How is the printer connected to the computer (wifi, usb, ethernet)?
4. Have you tried to install any other software recently?
If I have helped in any way, just click the Kudos star on the left. Also, if your issue has been resolved, don't forget to select Accept as Solution

HP Laserjet Pro 100 Color MFP M175nw Print missing/faded down centre of every page

HP Laserjet Pro 100 Color MFP M175nw. Operating on Windows 7 from my laptop wirelessly. Just bought this new a few day's ago and each page of print has about 20mm wide streak missing print running down the centre. what can I do to correct this problem? I have tried printing a cleaning page a couple of times and calibrating color from the Print Quality Menu also a couple of times but this has made no difference. I'm using a Premium quality paper for use in laserjet printer's. Could someone please advise me what I can do. Thanks in anticipation.
This question was solved.
View Solution.

Hi Watcher35,
I see that the new Laserjet Pro 100 MFP M175NW is missing print down the center of the pages, you have ran cleaning and color calibration but the issue is not resolved.
Would this be an accurate example of the issue: but with the "Bb" would be completely missing?
This HP document: Resolving Print Quality Issues may take you though some of the same steps you have already done, I suggest not skipping any steps.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here.
Regards,
JERENDS
I work on behalf of HP
Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

HP LaserJet Pro 100 color MFP M175nw unable to communicate with product

Hi guys,
I've had a HP LaserJet Pro 100 color MFP M175nw for 12months now and it has worked great over my wireless network. I recently upgraded from router from a 5 year old single band router to a late model dualband wireless N router.
Since i did this my HP LaserJet Pro 100 color MFP M175nw was unable to reconnect to my new network.
I have uninstalled the drivers and have tried reinstalling the drivers but each time (after I select Connect the Product/Coonect through wireless network, have tried both Yes retrieve the wirelss settings on my computer and No I will enter the wirelss settings manually) but no matter which I select the printer is installed successfully but then gets stuck at 15% and says cannont communicate with the product.
I have disabled my firewall during the installation and have only used the USB cable when the installation has asked me to do so.
The printer is visible in control panel but each time I do a test print or send something to the printer in the sys tray the print job is shown but nothing ever happens.
The installation will work fine if I install it via the directly connect to the computer using USB option.
If I do a test print fromt he printer itself by going into the network setting, network test it prints a page that says:
Wireless On Pass
Wirelss Working Pass
Network Name SSID Found Fail
Security Fail
Your HP printer cannot find your wirelss router. The WPA authentification method on your HP has changed fromt he default setting.
Is there anyway I can edit the SSID network name and password without having to do this install process?
This is really frustrating. Just spent 3 hours with HP support which got me know where (they were reading the script the supplied me) and then when I rebooted and went to go back to online chat support the website tells me their support is only available during business hours!
Any help would be great

OK time to back up totally. I need to make sure you are following the instructions in the user guide to install this printer. Please start from scratch by uninstalling all software from your computer and outline every step to make sure it is correct.
You have to use the USB cable to set up the wireless connection.
Go here for the User Guide and all installation info. Get your drivers and troubleshooting info here too.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=5076465
The reason we have to start over is that you started the software installation when you changed your router. You don't have to do this, but now we do.
Say thanks by clicking the Kudos Thumbs Up to the right in the post.
If my post resolved your problem, please mark it as an Accepted Solution ...
I worked for HP but now I'm retired!

100% to 99%

Similar Messages

Maybe you are looking for