10g error on initjvm.sql during manual db creation

Hi all,
I get an error after my (manual) database ceation when I want to install a jvm (on Suse linux 10g), I hope you can help.
I've done several 'clean' installations by hand and several 'full' installations using the dbca. But I want to have a 'clean' install from my own scripts (including a RON & use of inside java later), but this effort fails (after a neat installation) when I want to install the jvm using the initjvm.sql script.
After my default database creation, I want to install the JVM, by starting:
cd /u01/app/oracle/product/10.1.0/db_1/javavm/install
sqlplus sys/[passwd] as sysdba @initjvm.sql 2>&1 | tee ~/setup_inst01/spool/initjvm.lst
cd -At the end (or at least at the end of this run) I get the following error:
begin if :jvmrmaction = 'NONE' then
ERROR at line 1:
ORA-29558: JAccelerator (NCOMP) not installed. Refer to Install Guide for
instructions.
ORA-06512: at "SYS.DBMS_JAVA", line 236
ORA-06512: at line 2It seemed that this JAccelerator was not really necessary for a JVM to run. So I installed the JVM check funtion (which I've installed before on Metalink's advice):
CREATE OR REPLACE FUNCTION XMLVER RETURN VARCHAR2 IS LANGUAGE JAVA NAME
'oracle.xml.parser.v2.XMLParser.getReleaseVersion() returns java.lang.String';
/Unfortunatelly it returned:
ERROR at line 1:
ORA-29540: class oracle/xml/parser/v2/XMLParser does not existThis gives me a clue the JVM is not installed properly.
I've run the rmjvm.sql script and am searching for a way to install the jvm correctly using scripts (not the dbca).
At this developing stage I'm not really able to contact Metalink, so I'm wondering how to install a JVM on a 10g database using scripts (10.1.0.3.0 on Linux). Anyone got an idea?
Regards,
Michiel

So,
I removed the JVM by running @rmjvm.sql in @ORA_HOME/javavm/install, then installed it again by running @initjvm.sql and ignored the error.
Next was running @initxml.sql in $ORA_HOME/rdbms/admin, but that wasn't really right (so @rmxml.sql in the same dir). After I ran @initxml.sql from @ORA_HOME/xdk/admin, no problems!
Regards,
Michiel

Similar Messages

Error in initjvm.sql

Hi everyone again,
to make the jvm work i tried installing the jvm lauching the initjvm.sql script as DBA.
I had several error as response, among which the most relevant were:
[1]: (Error): File 'initjvm1' not found.
[2]: (Error): File 'initjvm2' not found.
[3]: (Error): File 'initjvm3' not found.
[4]: (Error): File 'initjvm4' not found.
[4]: (Error): ORA-29540: class oracle/aurora/rdbms/DbmsJava does not exist
[6]: (Error): File 'init_security' not found.
[11]: (Error): File 'jvmdyn' not found.
[14]: (Error): ORA-01008: not all variables bound
Anyone can help?
Thank you in advance.
Andy

Andy,
As far as I know, you need to run the "initjvm.sql" script as user
SYS.
Hope this helps.
Good Luck,
Avi.

Error in appdstln.sql during upgrade to 12.1.1

Hi All,
I am upgrading my 11.5.9 ebs to 12.1.1 I have gone through all steps outlined in chapter 3 of Oracle® E-Business Suite
Upgrade Guide Release 11i to 12.1.3 Part No. E16342-03. I am now in point number 10 under " Perform the Upgrade" i.e :
Run the American English upgrade patch driver which is (u6678700.drv)
After going through nearly 130,000 jobs I got the following error in appdstln.sql
ORA-01400: cannot insert NULL into("AP"."AP_PAYMENT_HIST_DISTS"."INVOICE_DISTRIBUTION_ID")
Please help me get through this error asap as we are very low on time.

Please log a SR as no similar issues are reported in MOS website.
Thanks,
Hussein

Error when selecting batch during prod order creation

Hi Gurus,
When selecting batch for production orders components, an error prompted 'Invalid batch, does not match the selection criteria in batch determinat.'
After checking, it is because the classification is not maintained. So I need to re-create in MSC2N.
The question is, how/where should I change back the configurations on checking the batch classification during prod ord?
Thank you.

Kumar,
Please let me know how many Component items are there in the BOM? Out of which how many are Phantom assembly?
It looks like when the BOM is copied to the order it is crossing 9999 items.
I would suggest you to use an intermediate order/material to reduce this number.
I think there was an OSS notes for this to extend the number of character length for BOM items numbering (POSNR).
Hope this helps...Reward your points,
Regards,
Prasobh

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

SQL Server 2012 Developer Edition will not install. Setup files don't even get copied completely. Win 8.1. ACT instance is loaded & can't be deleted. From log file: Error: Action "PreMsiTimingConfigAction" failed during execution.

Hello,
I am glad it worked.
Thank you for visiting MSDN forums!
Regards,
Alberto Morillo
SQLCoffee.com

Non riesco a ricevere acquisti fatti su itunes, mi da questo errore :erreu : you have an error in your sql syntax; checkthe manual that corresponds to your mysql server version for the right syntax to use near from news order by id desc at line. cosa devo

non riesco a ricevere acquisti fatti su itunes, mi da questo errore :erreu : you have an error in your sql syntax; checkthe manual that corresponds to your mysql server version for the right syntax to use near from news order by id desc at line. cosa devo fare? grazie

Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]

Initjvm.sql errors

I tried to run the initjvm.sql script on Windows 2000 Oracle 8i (8.1.71.1) with increased shared and java pools.
I got bunch of ORA-29516: Aurora assertion failure: Assertion failure at eox.c:217
Uncaught exception Root of all Java exceptions: X0
and it ended with JVMRMACTION
FULL_REMOVAL
Statement processed.
Statement processed.
Statement processed.
ORA-01418: specified index does not exist
ORA-06512: at line 11
SVRMGR>
It obviously did not install correctly. Anyone know what this means?
Thanks,
Bob

This looks alright (I have the same number of objects).
It is indeed a strange way to validate you JVM installation.
I've not yet seen any other way to validate your JVM
installation. Except for invalid objects...
Good luck!

ENCOUNTER ORA-29558 WHILE RUNNING INITJVM.SQL ORA-29558

Hi,
Anyone know, can the below error message be ignore? Can the javavm still function if the NCOMP is not install? Is there any way to do a manual installation rather then using the universal installer?
Thank You.
While running initjvm.sql script, i encountered the below error message.
ERROR at line 1:
ORA-29558: JAccelerator (NCOMP) not installed. Refer to Install Guide for
instructions.
ORA-06512: at "SYS.DBMS_JAVA", line 236

loobs,
To avoid error "ORA-29558: JAccelerator (NCOMP) not installed" you must install Oracle 10G Products from Companion CD to the same directory where you installed Oracle DB 10g.
Nicolas.

XL Reporter Installation - Error executing IXMetaProcs.sql

Hi All,
During installation getting error-
Error Preparing Metadata Repository:
Executing SQL script 'IXMetaProcs.sql' (Start:....)
ExitCode -1073741819
!!! ERROR Error executing IXMetaProcs.sql ExitCode -1073741819
I have done the following checks.
1.     XL Reporter has bee removed from Administrator->Add-On Administrator.
2.     Add-Remove List Does not show XL Reporter.
3.     Removed manually Database IXMetaSBOOEM from SQL Server.
4.     %temp% - > SM_OBS_DLL folder not found.
5.     ILytix folder not found in HKEY_CURRENT_USER -> Software
ILytix folder not found in HKEY_LOCAL_MACHINE-> Software
6.     There is no other add-on installed
7.     AddOnsInstall.sbo deleted.
      AddOnsLocalRegistration.sbo not found.
8. C:\Prog Files\SAP\SAP Business One\Add-Ons folder not found.
But still I can't install XL Reporter.

hi,
first you have to check that you have install "dot. Net Framework 2.0" which is compulsory needed for installing XL reporter, also you have to install MS Office in your system.
uninstall the XL reporter and install using the following steps
installation steps of XL-reporter add-on,
1. goto add-on administration => Register Add-on(click).
give the XL reporter address. select default group as Manual.
update.
2. goto addon manager => pending Add-on tab => select the addon row and install.
in installation give the user id and pwd of SQL server.
3.goto addon manager =>installed addons tab, start the XL reporter, once it get connected as status.
4. go to tools menu in SAP B1, in that you will find XL reporter, click that XL reporter will open.(to view XL reporter)
follow the above steps you will get the XL repoter add-on running in SAP B1.
regards
sandip

Executing initjvm.sql

Hi
I execute the initjvm.sql file to install the jvm, but somewhere I got the following error.
alter rollback segment monster offline
Mon Sep 2 17:00:41 2002
ORA-1534 signalled during: alter rollback segment monster offline...
Mon Sep 2 17:00:41 2002
drop rollback segment monster
ORA-1534 signalled during: drop rollback segment monster...
Mon Sep 2 17:00:41 2002
create rollback segment monster storage (initial 100 k next 100 k maxextents unlimited)
Completed: create rollback segment monster storage (initial 1
Mon Sep 2 17:00:42 2002
alter rollback segment monster online
Completed: alter rollback segment monster online
I was looking in the Script for this the string "monster" and found it in the sqlfile inijvmaux.sql.
BEGIN
deallocate_rollback_segment := FALSE;
OPEN C1;
FETCH C1 INTO rollback_segment_name;
if C1%NOTFOUND then
deallocate_rollback_segment := TRUE;
rollback_segment_name := 'MONSTER';
drp('alter rollback segment monster offline');
drp('drop rollback segment monster');
exec('create rollback segment monster ' ||
'storage (initial 100 k next 100 k maxextents unlimited)');
exec('alter rollback segment monster online');
END IF;
CLOSE C1;
return
'set transaction use rollback segment ' || rollback_segment_name;
END;
In the ora-error documentation it sais i've to use the right rollback segment name. But what is the right rollback segment name. How do I find this out?
Cyrill

Hi
I execute the initjvm.sql file to install the jvm, but somewhere I got the following error.
alter rollback segment monster offline
Mon Sep 2 17:00:41 2002
ORA-1534 signalled during: alter rollback segment monster offline...
Mon Sep 2 17:00:41 2002
drop rollback segment monster
ORA-1534 signalled during: drop rollback segment monster...
Mon Sep 2 17:00:41 2002
create rollback segment monster storage (initial 100 k next 100 k maxextents unlimited)
Completed: create rollback segment monster storage (initial 1
Mon Sep 2 17:00:42 2002
alter rollback segment monster online
Completed: alter rollback segment monster online
I was looking in the Script for this the string "monster" and found it in the sqlfile inijvmaux.sql.
BEGIN
deallocate_rollback_segment := FALSE;
OPEN C1;
FETCH C1 INTO rollback_segment_name;
if C1%NOTFOUND then
deallocate_rollback_segment := TRUE;
rollback_segment_name := 'MONSTER';
drp('alter rollback segment monster offline');
drp('drop rollback segment monster');
exec('create rollback segment monster ' ||
'storage (initial 100 k next 100 k maxextents unlimited)');
exec('alter rollback segment monster online');
END IF;
CLOSE C1;
return
'set transaction use rollback segment ' || rollback_segment_name;
END;
In the ora-error documentation it sais i've to use the right rollback segment name. But what is the right rollback segment name. How do I find this out?
Cyrill

4.7 Enterprise install error in catproc.sql phase(RedHat5- Oracle 10.2.0.4)

Hi,
I am installing SAP 4.7 Enterprise on Red Hat 5.3 and Oracle 10.2.0.4. When I install 4.7 Enterpirse I have an error in catproc.sql phase like below: -
ERROR 2009-06-02 18:42:34
CJS-00084 SQL statement or script failed.<br>DIAGNOSIS: Error message: ORA-955 for defaultdestSQL> Rem     bnainani   11/29/00 - specify compatible=8.0 for create_queue_tableSQL> Rem     liwong     10/20/00 - add def$_destination.flagSQL> Rem     bnainani   11/15/00 - specify compatible=8.0 for queue tableSQL> Rem     narora     09/13/00 - add comment on new def$_destination columnsSQL> Rem     liwong     09/01/00 - add master w/o quiesce: fixesSQL> Rem     liwong     07/12/00 - add total_prop_time_latSQL> Rem     liwong     06/29/00 - add total_txn_count, total_prop_timeSQL> Rem     liwong     05/17/00 - add_master_db w/o quiesceSQL> Rem     jstamos    05/17/00 - add_master_db w/o quiesceSQL> Rem     elu        01/24/00 - add column apply_init to def$_destinationSQL> Rem     alakshmi   12/02/99 - Bug 979398: Before-row insert trigger onSQL> Rem                            def$_propagatorSQL> Rem     wesmith    10/31/98 - change shape of table def$_pushed_transactionsSQL> Rem     jnath      02/23/98 - bug 601972: split anonymous pl/sql blocksSQL> Rem     wesmith    01/21/98 - create def$_pushed_transactions table forSQL> Rem                            server-side RepAPISQL> Rem     nbhatt     07/27/97 - change create_queuetable -> create_queue_tableSQL> Rem     nbhatt     04/21/97 - change 'TRACKING' in CREATE_QUEUE to 'DEPENDENCYSQL> Rem     nbhatt     04/21/97 - change syntax of create_queueSQL> Rem     liwong     04/16/97 - Alter view system.AQ$DEF$_AQ{CALL,ERROR}SQL> Rem     liwong     04/11/97 - Fixing defaultdest_primary typoSQL> Rem     jstamos    04/10/97 - remove unneeded indexesSQL> Rem     nbhatt     04/08/97 - change create_qtable to create_queuetableSQL> Rem     jstamos    04/04/97 - tighter AQ integrationSQL> Rem     liwong     04/02/97 - Add schema_name, package_name in def$_calldestSQL> Rem     ato        03/31/97 - create_qtable interface changeSQL> Rem     liwong     03/25/97 - remove batch_no from def$_tranorderSQL> Rem     liwong     02/24/97 - pctversion --> 0 for def$_aqcall, def$_aqerrorSQL> Rem     liwong     02/22/97 - Remove dropping view aq$def$_aqcallSQL> Rem     ademers    02/07/97 - Remove constraint def$_calldest_callSQL> Rem     liwong     01/11/97 - drop and create aq$def$_aqcall (temporary)SQL> Rem     liwong     01/10/97 - Alter view aq$def$_aqcallSQL> Rem     liwong     01/07/97 - Alter default value for batch_noSQL> Rem     jstamos    12/23/96 - change temp$nclob colSQL> Rem     jstamos    11/21/96 - nchar supportSQL> Rem     sjain      11/11/96 - Remove dummy buffer # commentSQL> Rem     asgoel     11/05/96 - Disable misc_tracking in def$_aqerrorSQL> Rem     sjain      11/06/96 - deferror changesSQL> Rem     vkrishna   10/28/96 - change STORED IN to STORE AS for lobSQL> Rem     sjain      10/02/96 - Aq conversionSQL> Rem     sbalaram   09/24/96 - ARPC performance - add foreign key indexSQL> Rem     jstamos    09/06/96 - rename temp$lob and temporarily change nclobSQL> Rem     sjain      09/03/96 - AQ conversonSQL> Rem     ademers    08/02/96 - queue_batch default in def_destinationSQL> Rem     ademers    07/29/96 - queue_batch default in def_callSQL> Rem     ademers    07/29/96 - queue_batch defaultSQL> Rem     jstamos    07/24/96 - add system.temp$lobSQL> Rem     sbalaram   07/22/96 - create def$_aqcall and def$_aqerror tablesSQL> Rem     jstamos    06/12/96 - LOB support for deferred RPCsSQL> Rem     ldoo       06/28/96 - Comment out queue_table from def_tranorderSQL> Rem     ademers    05/30/96 - create def_originSQL> Rem     ademers    05/28/96 - fix def_destination col namesSQL> Rem     ldoo       05/09/96 - New security modelSQL> Rem     sjain      05/01/96 - add seq col to def_destinationSQL> Rem     ademers    04/29/96 - add batch_no, dep_scn to def_callSQL> Rem     jstamos    12/04/95 - 324303: use index to avoid sorting the queueSQL> Rem     jstamos    08/17/95 - code review changesSQL> Rem     jstamos    08/16/95 - add comments to tablesSQL> Rem     wmaimone   01/04/96 - 7.3 mergeSQL> Rem     hasun      01/31/95 - Modify tables.<br>SOLUTION: See ora_sql_results.log and the Oracle documentation for details.
Also some error lines in ora_sql_results.log file like below:
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
Linux-x86_64 Error: 2: No such file or directory
Disconnected
DOC>     The following statement will cause an "ORA-01722: invalid number"
DOC>     error and terminate the SQLPLUS session if the user is not SYS.
DOC>     Disconnect and reconnect with AS SYSDBA.
ERROR at line 1:
ORA-01432: public synonym to be dropped does not exist
ERROR at line 1:
ORA-00942: table or view does not exist
DOC>     The following PL/SQL block will cause an ORA-20000 error and
DOC>     terminate the current SQLPLUS session if the user is not SYS.
DOC>     Disconnect and reconnect with AS SYSDBA.
ERROR at line 1:
ORA-01921: role name 'EXP_FULL_DATABASE' conflicts with another user or role
name
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
ERROR at line 1:
ORA-04043: object DIANA does not exist
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
ERROR at line 1:
ORA-04043: object DIUTIL does not exist
ERROR at line 1:
ORA-04043: object SUBPTXT2 does not exist
ERROR at line 1:
ORA-04043: object CREATE_TABLE_COST_COLUMNS does not exist
ERROR at line 1:
ORA-01434: private synonym to be dropped does not exist
And ora_sql.log file is:
connect / as sysdba ;
SHUTDOWN ABORT;
exit;
Executed successfully.
connect / as sysdba ;
SHUTDOWN IMMEDIATE;
exit;
Executed with error.
connect / as sysdba ;
STARTUP NOMOUNT;
exit;
Executed successfully.
connect / as sysdba ;
CREATE DATABASE MDP CONTROLFILE REUSE MAXLOGFILES 255 MAXLOGMEMBERS 3 MAXLOGHISTORY 1000 MAXDATAFILES 254 MAXINSTANCES 50 NOARCHIVELOG CHARACTER SET UTF8 NATIONAL CHARACTER SET UTF8 DATAFILE '/oracle/MDP/sapdata1/system_1/system.data1' SIZE 350M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M EXTENT MANAGEMENT LOCAL DEFAULT TEMPORARY TABLESPACE PSAPTEMP TEMPFILE '/oracle/MDP/sapdata1/temp_1/temp.data1' SIZE 1750M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M UNDO TABLESPACE PSAPUNDO DATAFILE '/oracle/MDP/sapdata1/undo_1/undo.data1' SIZE 700M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M SYSAUX DATAFILE '/oracle/MDP/sapdata1/sysaux_1/sysaux.data1' SIZE 1000M REUSE AUTOEXTEND ON NEXT 20M MAXSIZE 10000M
LOGFILE GROUP 1 ('/oracle/MDP/origlogA/log_g11m1.dbf',
'/oracle/MDP/mirrlogA/log_g11m2.dbf') SIZE 50M REUSE ,
GROUP 2 ('/oracle/MDP/origlogB/log_g12m1.dbf',
'/oracle/MDP/mirrlogB/log_g12m2.dbf') SIZE 50M REUSE ,
GROUP 3 ('/oracle/MDP/origlogA/log_g13m1.dbf',
'/oracle/MDP/mirrlogA/log_g13m2.dbf') SIZE 50M REUSE ,
GROUP 4 ('/oracle/MDP/origlogB/log_g14m1.dbf',
'/oracle/MDP/mirrlogB/log_g14m2.dbf') SIZE 50M REUSE
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catalog.sql
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catblock.sql
exit;
Executed successfully.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
connect / as sysdba ;
set newpage 0
set space 0
set pagesize 0
set linesize 32767
set markup HTML off
set heading off
set verify off
set feedback off
set trimspool on
set sqlprompt SQL>
set termout on
set verify off
set echo off
spool ora_query3_tmp0_1.res
SELECT STATUS FROM V$INSTANCE;
spool off
exit;
Executed successfully.
connect / as sysdba ;
@@/oracle/MDP/102_64/rdbms/admin/catproc.sql
exit;
Executed with error.
The errors are like these. How can I correct these errors and continue to installation? Is the oracle version 10.2.0.4 not correct version to install 4.7 enterprise on Red Hat Linux 5.3?
Best regards,

Hi Markus,
I found 5 ERROR. There are different lines.
First one:
      <fld name="STATUS">
        <strval><![CDATA[ERROR]]>
Second one:
CASE (= 'AUTOALLOCATE') RETURN (' AUTOALLOCATE '),
                CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtAllocMode
Third one:
CASE (= 'DICTIONARY') RETURN (' DICTIONARY '),
              CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtMode
Fourth one:
CASE (= 'AUTOALLOCATE') RETURN (' AUTOALLOCATE '),
                CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtAllocMode
Fifth one:
CASE (= 'DICTIONARY') RETURN (' DICTIONARY '),
              CASE (DEFAULT) RETURN (' ERROR ' + (tTablespaces.extMgmtMode
Which one will I change to OK? Must all off them change to OK?
Also is this problem about only these oracle error in your oppinion? For example in first line of ora_sql_results.log I have an error like below:
CJS-00084 SQL statement or script failed
Connected to an idle instance.
ORA-01034: ORACLE not available
ORA-27101: shared memory realm does not exist
But ORACLE_HOME and ORACLE_SID environment variable are ok. Also I can connect and start and stop database manually. There is no problem about it.
I installed anly Oracle patch 10.2.0.4. I didn't install any oracle interim patch. Should I have install oracle interim patch for Oracle 10.2.0.4?
Best regards,

Getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt

Hi,
I am getting error while installing sql server std 2008 R2 on win 7 prof. sp1 64bit. I have already tried all option but fail to installation
an error during the installation of assembly micro soft.vc80.crt
Can you please post summary.txt file here.Below link will help you in finding it.
http://technet.microsoft.com/en-us/library/ms143702(v=sql.105).aspx
Also with error you posted I guess it is a known issue .You need to install below package and then continue with fresh installation
http://www.microsoft.com/en-gb/download/details.aspx?id=15336
Please make sure before beginning fresh installation you make sure previous failed installation is removed completely.Use add remove program to remove failed SQL Server.If yu still face issue please post summary.txt file here
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Concurrent manager encountered an error while running sql*plus for your concurrent request create internal order

Hi
We have a big problem, We can't create internal orders, when I run the CREATE INTERNAL ORDER, it finish with ERROR:
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
this is the log:
+---------------------------------------------------------------------------+
Purchasing: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
POCISO module: Create Internal Orders
+---------------------------------------------------------------------------+
Current system time is 26-JUL-2013 09:21:09
+---------------------------------------------------------------------------+
+-----------------------------
| Starting concurrent program execution...
+-----------------------------
+---------------------------------------------------------------------------+
Start of log messages from FND_FILE
+---------------------------------------------------------------------------+
Begin create internal sales order
Updating Req Headers
14 Reqs selected for processing
Top of Fetch Loop
Source Operating Unit: 82
Selecting Currency Code
Currency Code : MXP
Selecting Order Type
Order Type ID:1001
Selecting Price List from Order Type
Deliver To Location Id: 196
Inserting Header : 3908784
Getting the customer id
Getting the customer id: 15334
Unhandled Exception : ORA-01403: no data found
+---------------------------------------------------------------------------+
End of log messages from FND_FILE
+---------------------------------------------------------------------------+
Concurrent Manager encountered an error while running SQL*Plus for your concurrent request 134980682.
Review your concurrent request log and/or report output file for more detailed information.
+---------------------------------------------------------------------------+
Executing request completion options...
Output file size:
78
Output is not being printed because:
The print option has been disabled for this report.
Finished executing request completion options.
+---------------------------------------------------------------------------+
Concurrent request completed
Current system time is 26-JUL-2013 09:21:14
+---------------------------------------------------------------------------+
Some suggestion for resolve it??
Thanks & Regards.

In the document 294932.1 Section 4 there are no pre-installation patches or update for OS RedHat LinuxAS4.
When I type echo $LD_ASSUME_KERNEL it doesn't display any value so do I need to set the LD_Assume_Kernal value manually.
If yes, please let me know the path and command to set the kernel value.
Thanks
Amith

06528. 00000 - "Error executing PL/SQL profiler"

HI.
i am getting an error -
ORA-06528: Error executing PL/SQL profiler
ORA-06512: at "SYS.DBMS_PROFILER", line 258
ORA-06512: at line 3
06528. 00000 - "Error executing PL/SQL profiler"
*Cause:    An error occurred in during execution of a PL/SQL profiler
procedure.
when i try to run the following block
BEGIN
DBMS_PROFILER.START_PROFILER( sysdate,'');
DBMS_PROFILER.FLUSH_DATA;
END;
plz help

Run proftab.sql first. look st the test case. Hopefully you have installed dbms_profiler package. The first anonymous block is to test that, second block is your block which is failing.
SQL> ed
Wrote file afiedt.buf
1 declare
2 var1 binary_integer;
3 var2 binary_integer;
4 begin
5     DBMS_PROFILER.GET_VERSION(Var1,var2);
6     dbms_output.put_line('Var1 '||Var1);
7* end;
8 /
Var1 2
PL/SQL procedure successfully completed.
SQL> BEGIN
2 DBMS_PROFILER.START_PROFILER( sysdate,'');
3 DBMS_PROFILER.FLUSH_DATA;
4 END;
5 /
BEGIN
ERROR at line 1:
ORA-06528: Error executing PL/SQL profiler
ORA-06512: at "SYS.DBMS_PROFILER", line 123
ORA-06512: at "SYS.DBMS_PROFILER", line 132
ORA-06512: at line 2
SQL> @C:\oraclexe\app\oracle\product\10.2.0\server\RDBMS\ADMIN\proftab.sql
SQL> BEGIN
2 DBMS_PROFILER.START_PROFILER( sysdate,'');
3 DBMS_PROFILER.FLUSH_DATA;
4 END;
5 /
PL/SQL procedure successfully completed.

Error Text = PL/SQL: ORA-00926

Can some one tell me what the problem is with this, fairly urgent
ERROR:Line # = 120 Column # = 28 Error Text = PL/SQL: ORA-00926: missing VALUES keyword
Line # = 120 Column # = 2 Error Text = PL/SQL: SQL [b]Statement ignored
Oracle Migration Workbench
CREATE OR REPLACE FUNCTION "SA"."SPCXDB_DELIVERPRJ" (
CurrUser_ID IN NUMBER DEFAULT NULL,
Object_ID IN NUMBER DEFAULT NULL,
Path_ID IN NUMBER DEFAULT NULL,
IsLastPhase IN NUMBER DEFAULT NULL,
NewPhase_ID IN NUMBER DEFAULT NULL,
User_ID IN NUMBER DEFAULT NULL,
Comment_ IN VARCHAR2 DEFAULT NULL,RC1_CALL IN OUT Omwb_emulation.globalPkg.RCT1 )
RETURN INTEGER
AS
CurrUser_ID_ NUMBER(10,0) := CurrUser_ID;
Object_ID_ NUMBER(10,0) := Object_ID;
Path_ID_ NUMBER(10,0) := Path_ID;
IsLastPhase_ NUMBER(3,0) := IsLastPhase;
NewPhase_ID_ NUMBER(10,0) := NewPhase_ID;
User_ID_ NUMBER(10,0) := User_ID;
Comment__ VARCHAR2(255) := Comment_;
StoO_selcnt INTEGER;
StoO_error INTEGER;
StoO_rowcnt INTEGER;
StoO_crowcnt INTEGER := 0;
StoO_fetchstatus INTEGER := 0;
StoO_errmsg VARCHAR2(255);
StoO_sqlstatus INTEGER;
tempVar1 NUMBER :=3;
tempVar2 NUMBER :=1;
id NUMBER(10,0);
CURSOR ptr IS
SELECT Object_ID
FROM TT_DVROBJECTS;
dummy_var1 INTEGER;
/****** Object: Stored Procedure dbo.spCXDB_deliverprj Script Date: 2003-11-12 14:21:41 ******/
-- currently logged user id
BEGIN
NULL;
/*[SPCONV-ERR(12)]:(set XACT_ABORT) Manual conversion required*/
1) update project
IF SPCXDB_DELIVERPRJ.IsLastPhase_ = 0 THEN
BEGIN
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
UPDATE sa.CXDBObjects
SET DvrPath_ID = SPCXDB_DELIVERPRJ.Path_ID_,
DvrPhase_ID = SPCXDB_DELIVERPRJ.NewPhase_ID_,
DvrUser_ID = SPCXDB_DELIVERPRJ.User_ID_
WHERE Object_ID = SPCXDB_DELIVERPRJ.Object_ID_;
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
-- Status = 4
END;
ELSE
BEGIN
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
UPDATE sa.CXDBObjects
SET DvrPath_ID = 0,
DvrPhase_ID = 0,
DvrUser_ID = 0
WHERE Object_ID = SPCXDB_DELIVERPRJ.Object_ID_;
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
-- Status = 0
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
UPDATE sa.CXDBDeliverPaths
SET RefCount = RefCount - 1
WHERE Path_ID = SPCXDB_DELIVERPRJ.Path_ID_;
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
2) get all subobjects , subprojects and documents
END;
END IF;
/* Emulating @@TRANCOUNT functionality in Oracle model */
omwb_emulation.globalPkg.trancount:=omwb_emulation.globalPkg.trancount+1;
/*[SPCONV-ERR(55)]:CREATE TABLE TT_DVROBJECTS_2-- TT_DVROBJECTS Will be used -- statement passed to ddl file*/
DELETE FROM TT_DVROBJECTS;
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
INSERT INTO TT_DVROBJECTS ; /*ERROR:Line # = 120 Column # = 28 Error Text = PL/SQL: ORA-00926: missing VALUES keyword
Line # = 120 Column # = 2 Error Text = PL/SQL: SQL Statement ignored
SQL SERVER 2000
BEGIN TRAN
CREATE TABLE #DvrObjects ( Object_ID int NOT NULL )
NSERT
#DvrObjects
EXEC
spCXDB_expandtree @Object_ID,3,1 */
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
BEGIN
/* demoDMS*/sa.spCXDB_expandtree(SPCXDB_DELIVERPRJ.Object_ID_,
tempVar1,
tempVar2,
RC1 => RC1_CALL);
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
3) put documents and projects onto deliver path
NULL;/*DECLARE CURSOR ptr */
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
StoO_crowcnt := 0;
OPEN ptr;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
StoO_crowcnt := 0;
FETCH ptr INTO
SPCXDB_DELIVERPRJ.id;
EXCEPTION
WHEN OTHERS THEN
StoO_rowcnt := 0;
StoO_selcnt := 0;
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
IF ptr%NOTFOUND THEN
StoO_sqlstatus := 2;
StoO_fetchstatus := -1;
ELSE
StoO_sqlstatus := 0;
StoO_fetchstatus := 0;
END IF;
<<i_loop1>>
WHILE ( StoO_fetchstatus = 0) LOOP
BEGIN
-- IF (SELECT Status FROM CXDBObjects WHERE Object_ID = @id) = 4 AND
BEGIN
StoO_selcnt := 0;
StoO_error := 0;
StoO_rowcnt := 0;
SELECT 1 INTO StoO_selcnt
FROM DUAL
WHERE 0 <> (
SELECT DvrPhase_ID
FROM CXDBObjects
WHERE Object_ID = SPCXDB_DELIVERPRJ.id ) AND SPCXDB_DELIVERPRJ.Path_ID_
= (
SELECT DvrPath_ID
FROM CXDBObjects
WHERE Object_ID = SPCXDB_DELIVERPRJ.id );
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
StoO_rowcnt := 0;
StoO_selcnt := 0;
WHEN OTHERS THEN
StoO_rowcnt := 0;
StoO_selcnt := 0;
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
IF StoO_selcnt != 0 THEN
BEGIN
BEGIN
BEGIN
StoO_selcnt := 0;
StoO_error := 0;
StoO_rowcnt := 0;
SELECT 1 INTO StoO_selcnt
FROM DUAL
WHERE 0 = (
SELECT type_
FROM CXDBObjects
WHERE Object_ID = SPCXDB_DELIVERPRJ.id );
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
StoO_rowcnt := 0;
StoO_selcnt := 0;
WHEN OTHERS THEN
StoO_rowcnt := 0;
StoO_selcnt := 0;
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
IF StoO_selcnt != 0 THEN
BEGIN
-- update project data
IF SPCXDB_DELIVERPRJ.IsLastPhase_ = 0 THEN
BEGIN
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
UPDATE sa.CXDBObjects
SET DvrPath_ID = SPCXDB_DELIVERPRJ.Path_ID_,
DvrPhase_ID = SPCXDB_DELIVERPRJ.NewPhase_ID_,
DvrUser_ID = SPCXDB_DELIVERPRJ.User_ID_
WHERE Object_ID = SPCXDB_DELIVERPRJ.id;
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
-- Status = 4
END;
ELSE
BEGIN
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
UPDATE sa.CXDBObjects
SET DvrPath_ID = 0,
DvrPhase_ID = 0,
DvrUser_ID = 0
WHERE Object_ID = SPCXDB_DELIVERPRJ.id;
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
-- Status = 0
--decrease path reference counter
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
UPDATE sa.CXDBDeliverPaths
SET RefCount = RefCount - 1
WHERE Path_ID = SPCXDB_DELIVERPRJ.Path_ID_;
StoO_rowcnt := SQL%ROWCOUNT;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
END;
END IF;
END;
ELSE
BEGIN
BEGIN
dummy_var1 := /* demoDMS*/sa.spCXDB_deliverdocument(SPCXDB_DELIVERPRJ.CurrUser_ID_,
SPCXDB_DELIVERPRJ.id,
SPCXDB_DELIVERPRJ.Path_ID_,
SPCXDB_DELIVERPRJ.IsLastPhase_,
SPCXDB_DELIVERPRJ.NewPhase_ID_,
SPCXDB_DELIVERPRJ.User_ID_,
SPCXDB_DELIVERPRJ.Comment__);
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
END;
END IF;
END;
END;
END IF;
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
StoO_crowcnt := 0;
FETCH ptr INTO
SPCXDB_DELIVERPRJ.id;
EXCEPTION
WHEN OTHERS THEN
StoO_rowcnt := 0;
StoO_selcnt := 0;
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
IF ptr%NOTFOUND THEN
StoO_sqlstatus := 2;
StoO_fetchstatus := -1;
ELSE
StoO_sqlstatus := 0;
StoO_fetchstatus := 0;
END IF;
END;
END LOOP;
BEGIN
StoO_error := 0;
StoO_rowcnt := 0;
CLOSE ptr;
EXCEPTION
WHEN NO_DATA_FOUND THEN
NULL;
WHEN OTHERS THEN
StoO_error := SQLCODE;
StoO_errmsg := SQLERRM;
raise_application_error(SQLCODE, SQLERRM,true);
END;
NULL;
/* Emulating @@TRANCOUNT functionality in Oracle model */
IF omwb_emulation.globalPkg.trancount = 1 THEN
COMMIT WORK;
END IF;
IF omwb_emulation.globalPkg.trancount > 0 THEN
omwb_emulation.globalPkg.trancount:=omwb_emulation.globalPkg.trancount-1;
END IF;
RETURN (0);
END SPCXDB_DELIVERPRJ;
Thank's

Hi Hilary,
This is the original T-SQL code. Please, help me.
CREATE PROCEDURE spCXDB_deliverPrj
@CurrUser_ID     int,          -- currently logged user id
@Object_ID     int,
@Path_ID     int,
@IsLastPhase     tinyint,
@NewPhase_ID int,
@User_ID     int,
@Comment     varchar(255) = NULL
AS
SET XACT_ABORT ON
     1) update project
IF @IsLastPhase = 0
BEGIN
     UPDATE
          CXDBObjects
     SET
          DvrPath_ID = @Path_ID,
          DvrPhase_ID = @NewPhase_ID,
          DvrUser_ID = @User_ID
--          Status = 4
     WHERE
          Object_ID = @Object_ID
END
ELSE
BEGIN
     UPDATE
          CXDBObjects
     SET
          DvrPath_ID = 0,
          DvrPhase_ID = 0,
          DvrUser_ID = 0
--          Status = 0
     WHERE
          Object_ID = @Object_ID
     UPDATE
          CXDBDeliverPaths
     SET
          RefCount = RefCount - 1
     WHERE
          Path_ID = @Path_ID
END
     2) get all subobjects , subprojects and documents
BEGIN TRAN
CREATE TABLE #DvrObjects ( Object_ID int NOT NULL )
INSERT
     #DvrObjects
EXEC
     spCXDB_expandtree @Object_ID,3,1
     3) put documents and projects onto deliver path
DECLARE @id int
DECLARE ptr CURSOR FOR SELECT Object_ID FROM #dvrobjects
OPEN ptr
FETCH NEXT FROM ptr INTO @id
WHILE(@@FETCH_STATUS = 0)
BEGIN
--     IF     (SELECT Status FROM CXDBObjects WHERE Object_ID = @id) = 4 AND
     IF     (SELECT DvrPhase_ID FROM CXDBObjects WHERE Object_ID = @id) <> 0 AND
          (SELECT DvrPath_ID FROM CXDBObjects WHERE Object_ID = @id) = @Path_ID
     BEGIN
          IF (SELECT type FROM CXDBObjects WHERE Object_ID = @id) = 0
          BEGIN
               -- update project data
               IF @IsLastPhase = 0
               BEGIN
                    UPDATE
                         CXDBObjects
                    SET
                         DvrPath_ID = @Path_ID,
                         DvrPhase_ID = @NewPhase_ID,
                         DvrUser_ID = @User_ID
--                         Status = 4
                    WHERE
                         Object_ID = @id
               END
               ELSE
               BEGIN
                    UPDATE
                         CXDBObjects
                    SET
                         DvrPath_ID = 0,
                         DvrPhase_ID = 0,
                         DvrUser_ID = 0
--                         Status = 0
                    WHERE
                         Object_ID = @id
                    --decrease path reference counter
                    UPDATE
                         CXDBDeliverPaths
                    SET
                         RefCount = RefCount - 1
                    WHERE
                         Path_ID = @Path_ID
                    END
          END
          ELSE
          BEGIN
               EXEC spCXDB_deliverdocument @CurrUser_ID, @id,@Path_ID,@IsLastPhase,@NewPhase_ID,@User_ID, @Comment
          END
     END
     FETCH NEXT FROM ptr INTO @id
END
CLOSE ptr
DEALLOCATE ptr
COMMIT TRAN
RETURN(0)
Regards,
Emilia.

10g error on initjvm.sql during manual db creation

Similar Messages

Maybe you are looking for