11g DAC not starting up...syntax for  clearEncryptedData

Can anybody give me proper syntax and write up to use clearEncryptedData...toubleshooting guide is very vague about it
Thanks

Clear Encrypted Data
The clearEncryptedData property removes all encrypted data from the DAC repository.
Syntax:
<path to connection file> clearEncryptedData <schema owner>
Note: An authentication file is not required for this operation. The repository password will be taken from command line input.
Caution:
This operation will clear all database, Informatica, and external executor passwords as well as all DAC user data. Use this command only when the authentication file with the encryption key was lost and cannot be recovered. After removing the encrypted data from the DAc repository, generate the authentication file with a new encryption key, and log into the DAC repository using the DAC Client. When prompted to add the encryption key, update all passwords in the DAC repository and distribute the new authentication file to all required DAC users.

Similar Messages

  • Could not start cache agent for the requested data store

    Hi,
    This is my first attempt in TimesTen. I am running TimesTen on the same Linux host (RHES 5.2) that running Oracle 11g R2. The version of TimesTen is:
    TimesTen Release 11.2.1.4.0
    Trying to create a simple cache.
    The DSN entry for ttdemo1 in .odbc.ini is as follows:
    +[ttdemo1]+
    Driver=/home/oracle/TimesTen/timesten/lib/libtten.so
    DataStore=/work/oracle/TimesTen_store/ttdemo1
    PermSize=128
    TempSize=128
    UID=hr
    OracleId=MYDB
    DatabaseCharacterSet=WE8MSWIN1252
    ConnectionCharacterSet=WE8MSWIN1252
    Using ttisql I connect
    Command> connect "dsn=ttdemo1;pwd=oracle;oraclepwd=oracle";
    Connection successful: DSN=ttdemo1;UID=hr;DataStore=/work/oracle/TimesTen_store/ttdemo1;DatabaseCharacterSet=WE8MSWIN1252;ConnectionCharacterSet=WE8MSWIN1252;DRIVER=/home/oracle/TimesTen/timesten/lib/libtten.so;OracleId=MYDB;PermSize=128;TempSize=128;TypeMode=0;OracleNetServiceName=MYDB;
    (Default setting AutoCommit=1)
    Command> call ttcacheuidpwdset('ttsys','oracle');
    Command> call ttcachestart;
    *10024: Could not start cache agent for the requested data store. Could not initialize Oracle Environment Handle.*
    The command failed.
    The following is shown in the tterrors.log:
    15:41:21.82 Err : ORA: 9143: ora-9143--1252549744-xxagent03356: Datastore: TTDEMO1 OCIEnvCreate failed. Return code -1
    15:41:21.82 Err : : 7140: oraagent says it has failed to start: Could not initialize Oracle Environment Handle.
    15:41:22.36 Err : : 7140: TT14004: TimesTen daemon creation failed: Could not spawn oraagent for '/work/oracle/TimesTen_store/ttdemo1': Could not initialize Oracle Environment Handl
    What are the reasons that the daemon cannot spawn another agent? FYI the environment variables are set as:
    ORA_NLS33=/u01/app/oracle/product/11.2.0/db_1/ocommon/nls/admin/data
    ANT_HOME=/home/oracle/TimesTen/ttdemo1/3rdparty/ant
    CLASSPATH=/home/oracle/TimesTen/ttdemo1/lib/ttjdbc5.jar:/home/oracle/TimesTen/ttdemo1/lib/orai18n.jar:/home/oracle/TimesTen/ttdemo1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/ttdemo1/3rdparty/jms1.1/lib/jms.jar:.
    oracle@rhes5:/home/oracle/TimesTen/ttdemo1/info% echo $LD_LIBRARY_PATH
    /home/oracle/TimesTen/ttdemo1/lib:/home/oracle/TimesTen/ttdemo1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
    Cheers

    Sure thanks.
    Here you go:
    Daemon environment:
    _=/bin/csh
    DISABLE_HUGETLBFS=1
    SYSTEM=TEST
    INIT_FILE=/u01/app/oracle/product/10.1.0/db_1/dbs/init+ASM.ora
    GEN_APPSDIR=/home/oracle/dba/bin
    LD_LIBRARY_PATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/u01/app/oracle/product/11.2.0/db_1/lib:/u01/app/oracle/product/11.2.0/db_1/network/lib:/lib:/usr/lib:/usr/ucblib:/usr/local/lib
    HOME=/home/oracle
    SPFILE_DIR=/u01/app/oracle/backup/+ASM/initfile_dir
    TNS_ADMIN=/u01/app/oracle/product/11.2.0/db_1/network/admin
    INITFILE_DIR=/u01/app/oracle/backup/+ASM/initfile_dir
    HTMLDIR=/home/oracle/+ASM/dba/html
    HOSTNAME=rhes5
    TEMP=/oradata1/tmp
    PWD=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/bin
    HISTSIZE=1000
    PATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/bin:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/oci:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc/xla:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/jdbc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/odbc_drivermgr:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/proc:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/ttclasses:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/quickstart/sample_code/ttclasses/xla:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/ttoracle_home/instantclient_11_1/sdk:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/ant/bin:/usr/kerberos/bin:/bin:/usr/bin:/usr/local/bin:/sbin:/usr/bin/X11:/usr/X11R6/bin:/usr/platform/SUNW,Ultra-2/sbin:/u01/app/oracle/product/11.2.0/db_1:/u01/app/oracle/product/11.2.0/db_1/bin:.
    GEN_ADMINDIR=/home/oracle/dba/admin
    CONTROLFILE_DIR=/u01/app/oracle/backup/+ASM/controlfile_dir
    ETCDIR=/home/oracle/+ASM/dba/etc
    GEN_ENVDIR=/home/oracle/dba/env
    DATAFILE_DIR=/u01/app/oracle/backup/+ASM/datafile_dir
    BACKUPDIR=/u01/app/oracle/backup/+ASM
    RESTORE_ARCFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_arcfiles.txt
    TMPDIR=/oradata1/tmp
    CVS_RSH=ssh
    ARCLOG_DIR=/u01/app/oracle/backup/+ASM/arclog_dir
    REDOLOG_DIR=/u01/app/oracle/backup/+ASM/redolog_dir
    INPUTRC=/etc/inputrc
    LOGDIR=/home/oracle/+ASM/dba/log
    DATAFILE_LIST=/u01/app/oracle/backup/+ASM/datafile_dir/datafile.list
    LS_COLORS=no=00:fi=00:di=00;34:ln=00;36:pi=40;33:so=00;35:bd=40;33;01:cd=40;33;01:or=01;05;37;41:mi=01;05;37;41:ex=00;32:*.cmd=00;32:*.exe=00;32:*.com=00;32:*.btm=00;32:*.bat=00;32:*.sh=00;32:*.csh=00;32:*.tar=00;31:*.tgz=00;31:*.arj=00;31:*.taz=00;31:*.lzh=00;31:*.zip=00;31:*.z=00;31:*.Z=00;31:*.gz=00;31:*.bz2=00;31:*.bz=00;31:*.tz=00;31:*.rpm=00;31:*.cpio=00;31:*.jpg=00;35:*.gif=00;35:*.bmp=00;35:*.xbm=00;35:*.xpm=00;35:*.png=00;35:*.tif=00;35:
    PS1=rhes5:($ORACLE_SID)$
    G_BROKEN_FILENAMES=1
    SHELL=/bin/ksh
    PASSFILE=/home/oracle/dba/env/.ora_accounts
    LOGNAME=oracle
    ORA_NLS10=/u01/app/oracle/product/11.2.0/db_1/nls/data
    ORACLE_SID=mydb
    APPSDIR=/home/oracle/+ASM/dba/bin
    ORACLE_OWNER=oracle
    RESTOREFILE_DIR=/u01/app/oracle/backup/+ASM/restorefile_dir
    SQLPATH=/home/oracle/dba/bin
    TRANDUMPDIR=/tran
    RESTORE_SPFILE=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_spfile.txt
    RESTORE_DATAFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_datafiles.txt
    ENV=/home/oracle/.kshrc
    SSH_ASKPASS=/usr/libexec/openssh/gnome-ssh-askpass
    SSH_CONNECTION=50.140.197.215 62742 50.140.197.216 22
    LESSOPEN=|/usr/bin/lesspipe.sh %s
    TERM=xterm
    GEN_ETCDIR=/home/oracle/dba/etc
    SP_FILE=/u01/app/oracle/product/10.1.0/db_1/dbs/spfile+ASM.ora
    ORACLE_BASE=/u01/app/oracle
    ASTFEATURES=UNIVERSE - ucb
    ADMINDIR=/home/oracle/+ASM/dba/admin
    SSH_CLIENT=50.140.197.215 62742 22
    TZ=GB
    SUPPORT=oracle@linux
    ARCHIVE_LOG_LIST=/u01/app/oracle/backup/+ASM/arclog_dir/archive_log.list
    USER=oracle
    RESTORE_TEMPFILES=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_tempfiles.txt
    MAIL=/var/spool/mail/oracle
    EXCLUDE=/home/oracle/+ASM/dba/bin/exclude.lst
    GEN_LOGDIR=/home/oracle/dba/log
    SSH_TTY=/dev/pts/2
    RESTORE_INITFILE=/u01/app/oracle/backup/+ASM/restorefile_dir/restore_initfile.txt
    HOSTTYPE=i386-linux
    VENDOR=intel
    OSTYPE=linux
    MACHTYPE=i386
    SHLVL=1
    GROUP=dba
    HOST=rhes5
    REMOTEHOST=vista
    EDITOR=vi
    ORA_NLS33=/u01/app/oracle/product/11.2.0/db_1/ocommon/nls/admin/data
    ODBCINI=/home/oracle/.odbc.ini
    TT=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/
    SHLIB_PATH=/u01/app/oracle/product/11.2.0/db_1/lib:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1//lib
    ANT_HOME=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/ant
    CLASSPATH=/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/ttjdbc5.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/orai18n.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/lib/timestenjmsxla.jar:/home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/3rdparty/jms1.1/lib/jms.jar:.
    TT_AWT_PLSQL=0
    NLS_LANG=AMERICAN_AMERICA
    NLS_COMP=ANSI
    NLS_SORT=BINARY
    NLS_LENGTH_SEMANTICS=BYTE
    NLS_NCHAR_CONV_EXCP=FALSE
    NLS_CALENDAR=GREGORIAN
    NLS_TIME_FORMAT=hh24:mi:ss
    NLS_DATE_FORMAT=syyyy-mm-dd hh24:mi:ss
    NLS_TIMESTAMP_FORMAT=syyyy-mm-dd hh24:mi:ss.ff9
    ORACLE_HOME=
    DaemonCWD = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info
    DaemonLog = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/tterrors.log
    DaemonOptionsFile = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/ttendaemon.options
    Platform = Linux/x86/32bit
    SupportLog = /home/oracle/TimesTen/11.2.1.4.0/TimesTen/ttimdb1/info/ttmesg.log
    Uptime = 136177 seconds
    Backcompat = no
    Group = 'dba'
    Daemon pid 8111 port 53384 instance ttimdb1
    End of report

  • *** WARNING: Could not start service 80 for protocol HTTP on host MyFQDN

    Hi,
    I m configuring an external Sap webdispatcher to point to an ICF service
    I need to install it on Windows Web server where others web sites are running.
    I configured a specific ip for that on the Web servers and enter the DNS name in our domain.
    On the the pfl file I define :
    SAPLOCALHOSTFULL=<MyFQDN>
    icm/host_name_full =<MyFQDN>
    and specify icm/server_port_0 = PROT=HTTP,PORT=80
    Each time I m starting it I received *** WARNING: Could not start service 80 for protocol HTTP on host <MyFQDN> .........
    If I m using another port (Ex:86)no problem with my FQDN.But if I m doing servername:86 it s working also.
    It s seems that the webdispatcher don t care about my FQDN.
    How can I have the WEBDISPATCHER pointing to this specific FQDN and not all ?
    Thanks,

    Hi Damien,
    You problem is perfectly logical : It's not possible to have 2 programs (IIS and web dispatcher) listening together on the same 80 HTTP port.
    There is no configuration that I know on the web dispatcher to tell him to listen only on one IP address.
    Summary : what you want to do is not possible.
    I had a similar request and I did the following.
    I use a Linux box with an Apache reverse proxy to select to distribute the HTTP requests on different web dispatchers. The rules depends from the called URLs.
    Regards,
    Olivier

  • Could not start Service Broker for database id

    I am getting this message in the SQL Server error log:
    Could not start Service Broker for database id: 10. A problem is preventing SQL Server from starting Service Broker. Check the SQL Server error log for additional messages.
    It appears even when the broker is disabled on the database.  How can I eliminate this error?
    Thanks!

    In that case you're gonna have to contact Microsoft support, perhaps provide a copy of the database.
    Typical reason why a broker cannot be started is that another database with the same service_broker_guid already exists in the instance (result of a file copy/attach or a double restore). However, in that case a message is given that states the reason.

  • Could not start Service Broker for database

    Problem:
    Could not start Service Broker for database id: 9. A problem is preventing SQL Server from starting Service Broker. Check the SQL Server error log for additional messages.
    The windows and application logs do not give me any for information. I have checked the database instance and found that Database ID 9 does not exist in the sys.databases table. Could this be the reason?
    How do I resolve it so that SQL Server does not try and start Service broker for a database ID that does not exist?
    Any help will be greatly appreciated.
    Thanks.

    Hello Affy
    Solution/Fix: To avoid this alert, I have set the "Enable Disaster Recovery File Updates" parameter to 0 in the regedit at the below location.
    MY Computer\HKEY_LOCAL_MACHINE\SOFTWARE\Symantec\Backup Exec For Windows\Backup Exec\Engine\SQL Server
    For furher details you can refer my blog.
    Regards,
    Naveen Kumar Thandra

  • OBIEE 11g OPMNCTL not starting

    Hi All,
    When I'm trying to start my OBIEE services, all the services are starting, but the OPMNCTL status is not starting.
    When I'm trying to start it manually, It is giving me the below error message.
    Cannot resolve My-PC for instance any
    opmnctl Status: OPMN is not running
    At that time internet is not connected. But after I connected the net it didn't give this message. OPMNCTL started.
    Is it necessary to have internet to start my services.
    If not necessary how can I resolve my error when not connected to net.
    Thanks in advance.

    Hi,
    Make sure static ip r u using? If u used to installed dynamic
    Ip it throw this kind off issue . I have face this same issue in obiee11.1.1.3 with dynamic ip address
    Note: u shoud use static ip ( configure look back adopter )
    Thanks
    Deva

  • My imac does not start and asks for bootdisk

    i bought a new imac and connected it with internet to upgrade the drivers. Power went off... and now imac does not start.
    When it starts it asks for the boot disk and no boot disk came up with my mac.
    Please help how can i reinstall mac.
    thanks

    None of the options work. I press the power on button keeping the option and R button pressed but the only option that appears is
    First blank white screen appears as soon as i power on (option R is pressed) and then the following message
    No bootable Device -- Insert boot disk and press any key
    (Ethernet cable is connected but it does not go for internet recovery either)
    No more activity.
    Also if you can guide from where I can download OS X Lion for reinstalling it to the imac, please.
    Does every mac come with a restore/bootable disk or not? We ordered two macs but did not get any disk with any of them.
    Anxiously waiting for help....

  • Dac not generating paramter files for unspecified mapping in one workflow

    Hi,
    We are facing a problem with DAC while generating parameter files.I have a task in DAC which is calling a workflow(It contains two sessions,1.SILOS mapping,2.SILOS_UNSPECIFIED mapping).
    Both are using the same parameter file.
    During Development DAC used to generate parameters for both sessions in the same file.Both now in diff environment,it is generating parameters for the first session
    and for unspecified mapping it is not generating any parameters.So unspecified mappings are failing.
    Any one help?

    Please check whether the file parameterfileDW.txt has the section for that unspecified workflow. If not please copy and paste from DEV env and restart the load.
    If it exists in parameterfileDW.txt and still not not generating section for unspecified session in parameter file then try running the below command at <infa_home>\server\bin
    pmrep listobjectdependencies -n <WORKFLOW_NAME> -o workflow -f <FOLDER_NAME> -d session -p children
    and see whether the output as your unspecified session and post your observations.
    Mark If Helps

  • SAPCCMSR not started in sapmmc for trex

    HI.
    We have TREX7.0 system. In trex mmc sapccsr agent is not running. As per some guides we registered sapccmsr agent using sapccmsr pf=<instprofile> -j2ee -r to central solution manager system
    in services sapccmsr agent is registerd and started but it is immediatly stopping. as per note 883361 i have executed Agent for J2EE and TREX instances:
    sapccmsr pf=<instance profile> -j2ee -initshm but still we have same problem.
    And how services sapccmsr and sapmmc(automatically available in trex mmc)ccmsr is mapped.

    dev_sapccmsr log file details:
    trc file: "dev_sapccmsr", trc level: 1, release: "700"
    [Thr 80680] Mon Jul 20 09:37:23 2009
    [Thr 80680] *** ERROR => CCMS: ShmAlCreate (SAPSYSTEM=99) returns error 3 [alxxappl.c   1876]
    [Thr 80680] CCMS: AlInitGlobals : alert/use_sema_lock = TRUE.
    [Thr 80680] CCMS: Initalizing shared memory of size 40000000 for monitoring segment.
    [Thr 80680] Mon Jul 20 09:37:24 2009
    [Thr 80680] CCMS: Checking Downtime Configuration of Monitoring Segment.
    [Thr 80680] CCMS: AlMsUpload called by wp 2000.
    [Thr 80680] CCMS: AlMsUpload successful for E:\usr\sap\PRFCLOG\ALMTTREE.DAT (148 MTEs).

  • DAC not populating FACT table for the GL module - W_GL_OTHER_F (zero rows)

    All - We did our FULL loads from the Oracle Financials 11i into OBAW and got data in most of the dimension tables populated. HOWEVER, i am not seeing anything populating into the fact table W_GL_OTHER_F (zero rows). Following is a list of all dims / facts i am focusing towards for the GL module.
    W_BUSN_LOCATION_D     (8)
    W_COST_CENTER_D     (124)
    W_CUSTOMER_FIN_PROFL_D     (6,046)
    W_CUSTOMER_LOC_D     (4,611)
    W_CUSTOMER_LOC_D     (4,611)
    W_CUSTOMER_LOC_D     (4,611)
    W_DAY_D     (11,627)
    W_DAY_D     (11,627)
    W_DAY_D     (11,627)
    W_GL_ACCOUNT_D     (28,721)
    W_INT_ORG_D     (171)
    W_INVENTORY_PRODUCT_D     (395)
    W_LEDGER_D     (8)
    W_ORG_D     (3,364)
    W_PRODUCT_D     (21)
    W_PROFIT_CENTER_D     (23)
    W_SALES_PRODUCT_D     (395)
    W_STATUS_D     (7)
    W_SUPPLIER_D     (6,204)
    W_SUPPLIER_PRODUCT_D     (0)
    W_TREASURY_SYMBOL_D     (0)
    W_GL_OTHER_F <------------------------------------- NO FACT DATA AT ALL
    Question for the group: Are there any specific settings which might be preventing us from getting data loaded into our FACT tables? I was doing research and found the following on the internet:
    Map Oracle General Ledger account numbers to Group Account Numbers using the following file file_group_acct_names_ora.csv. Is this something that is necessary?
    Any help / guidance / pointers are greatly appreciated.
    Regards,

    There are many things to configure before your first full load.
    For the configuartion steps see Oracle Business Intelligence Applications Configuration Guide for Informatica PowerCenter Users
    - http://download.oracle.com/docs/cd/E13697_01/doc/bia.795/e13766.pdf (7951)
    - http://download.oracle.com/docs/cd/E14223_01/bia.796/e14216.pdf (796)
    3 Configuring Common Areas and Dimensions
    3.1 Source-Independent Configuration Steps
    Section 3.1.1, "How to Configure Initial Extract Date"
    Section 3.1.2, "How to Configure Global Currencies"
    Section 3.1.3, "How to Configure Exchange Rate Types"
    Section 3.1.4, "How to Configure Fiscal Calendars"
    3.2 Oracle EBS-Specific Configuration Steps
    Section 3.2.1, "Configuration Required Before a Full Load for Oracle EBS"
    Section 3.2.1.1, "Configuration of Product Hierarchy (Except for GL, HR Modules)"
    Section 3.2.1.2, "How to Assign UNSPSC Codes to Products"
    Section 3.2.1.3, "How to Configure the Master Inventory Organization in Product Dimension Extract for Oracle 11i Adapter (Except for GL & HR Modules)"
    Section 3.2.1.4, "How to Map Oracle GL Natural Accounts to Group Account Numbers"
    Section 3.2.1.5, "How to make corrections to the Group Account Number Configuration"
    Section 3.2.1.6, "About Configuring GL Account Hierarchies"
    Section 3.2.1.7, "How to set up the Geography Dimension for Oracle EBS"
    Section 3.2.2, "Configuration Steps for Controlling Your Data Set for Oracle EBS"
    Section 3.2.2.1, "How to Configure the Country Region and State Region Name"
    Section 3.2.2.2, "How to Configure the State Name"
    Section 3.2.2.3, "How to Configure the Country Name"
    Section 3.2.2.4, "How to Configure the Make-Buy Indicator"
    Section 3.2.2.5, "How to Configure Country Codes"
    5.2 Configuration Required Before a Full Load for Financial Analytics
    Section 5.2.1, "Configuration Steps for Financial Analytics for All Source Systems"
    Section 5.2.2, "Configuration Steps for Financial Analytics for Oracle EBS"
    Section 5.2.2.1, "About Configuring Domain Values and CSV Worksheet Files for Oracle Financial Analytics"
    Section 5.2.2.2, "How to Configure Transaction Types for Oracle General Ledger and Profitability Analytics (for Oracle EBS R12)"
    Section 5.2.2.3, "How to Configure Transaction Types for Oracle General Ledger and Profitability Analytics (for Oracle EBS R11i)"
    Section 5.2.2.4, "How to Specify the Ledger or Set of Books for which GL Data is Extracted"
    5.3 Configuration Steps for Controlling Your Data Set
    Section 5.3.1, "Configuration Steps for Financial Analytics for All Source Systems"
    Section 5.3.2, "Configuration Steps for Financial Analytics for Oracle EBS"
    Section 5.3.2.1, "How GL Balances Are Populated in Oracle EBS"
    Section 5.3.2.2, "How to Configure Oracle Profitability Analytics Transaction Extracts"
    Section 5.3.2.3, "How to Configure Cost Of Goods Extract (for Oracle EBS 11i)"
    Section 5.3.2.4, "How to Configure AP Balance ID for Oracle Payables Analytics"
    Section 5.3.2.5, "How to Configure AR Balance ID for Oracle Receivables Analytics and Oracle General Ledger and Profitability Analytics"
    Section 5.3.2.6, "How to Configure the AR Adjustments Extract for Oracle Receivables Analytics"
    Section 5.3.2.7, "How to Configure the AR Schedules Extract"
    Section 5.3.2.8, "How to Configure the AR Cash Receipt Application Extract for Oracle Receivables Analytics"
    Section 5.3.2.9, "How to Configure the AR Credit-Memo Application Extract for Oracle Receivables Analytics"
    Section 5.3.2.10, "How to Enable Project Analytics Integration with Financial Subject Areas"
    Also, another reason I had was that if you choose not to filter by set of books/type then you must still include the default values set of books id 1 and type NONE in the list on the DAC parameters (this is a consequence of strange logic in the decode statements for the sql in the extract etl).
    I would recomend you run the extract fact sql prior to running your execution plan to sanity check how many rows you expect to get. For example, to see how many journal lines, use informatica designer to view mapplet SDE_ORA11510_Adaptor.mplt_BC_ORA_GLXactsJournalsExtract.2.SQ_GL_JE_LINES.3 in mapping SDE_ORA11510_Adaptor.SDE_ORA_GLJournals then cut paste the SQL to run your favourite tool such as sqldeveloper. You will have to fill in the $$ variables yourself.

  • OIm 11g is not starting on instance 2.

    Hi all,
    We have installed OIm as instance 2 to pointing same DB which is used by instance 1, ad got the following error, when we start/restart the oim server.
    Note: two instalces pointed to same DB and Schema.
    Memory leaks and/or unexpected behaviour may occur if the automatic initialization is performed improperly.
    This message may be avoided by performing initADFContext before using getCurrent().
    To see the stack trace for thread that is initializing this, set the logging level of oracle.adf.share.ADFContext to FINEST>
    <Oct 21, 2011 2:07:20 AM EDT> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'oim [Version=11.1.1.3.0]' due to error oracle.iam.platform.utils.OIMAppInitializationException:
    OIM application intialization failed because of the following reasons:
    Password for .xldatabasekey is not seeded in CSF.
    oracle.iam.platform.utils.OIMAppInitializationException:
    OIM application intialization failed because of the following reasons:
    Password for .xldatabasekey is not seeded in CSF.
    at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAppInitializationListener.java:145)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
    Truncated. see log file for complete stacktrace
    Caused By: oracle.iam.platform.utils.OIMAppInitializationException:
    OIM application intialization failed because of the following reasons:
    Password for .xldatabasekey is not seeded in CSF.
    at oracle.iam.platform.utils.OIMAppInitializationListener.preStart(OIMAppInitializationListener.java:145)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
    at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
    at weblogic.application.internal.flow.BaseLifecycleFlow$LifecycleListenerAction.invoke(BaseLifecycleFlow.java:199)
    Truncated. see log file for complete stacktrace
    Thanks.

    Sorry for the short suggestion earlier, now that I re-read your issue.
    So when you installed the second OIM and pointed it to the existing encrypted database, then didn't it threw an error of the database being encrypted and for copying the .xldatabase key?
    Also I hope you gave the correct password for the database while configuring IDM.
    You can copy the .xldatabase key from your previous OIM instance 1 into the same location on OIM instance 2 and you should be good. Additionally check this for the location of the passwords: http://download.oracle.com/docs/cd/E17904_01/doc.1111/e14308/handlinglcm.htm#CIAFIFIB
    HTH,
    BB
    Edited by: bbagaria on Oct 21, 2011 2:03 PM

  • My phone does not start (see lights for call,menu,...

    Hi,
    I have Nokia x6 from two weeks. Yesterday, I put my phone on charge. I tried to turn off the phone to give it a rest. I tried it couple of times. One time it is turned on real bright. I took phone off charger and tuned off and put it back in chager.
    I think at that point I see light tuned on as the following.
    Call is key is turned on green
    menu white
    call end red
    After 10 hours, I took it off charger and tried to press power button, but it is not working. Still 3 of the bottom keys are turned on.
    Appreciate any help on how to bring it on.
    Solved!
    Go to Solution.

    i have a similar problem. i have a new N8. it was working alright except that i could not use it as a modem and it had difficulty connecting to nokia suite. It now is not turning on after i charged it up. i have tried holding down the power button for a long time but it is not powering  at all. however if i try putting it on the charger it does power on for a second and then goes off. i am worried about breaking the warranty if i try to open up the back to remove the battery as it is all screwed in. 
    coolbelief wrote:
    Happy you have got your phone back to life!
    "I thought of giving it rest for some time. When I got the problem, bottom three buttons green(call), white(menu), red (call end ) are illluminated all the time. What is the meaning of it?"
    Phone was trying to boot, but b'coz of some conflict it couldn't properly so it was staying there. Those lights comes up normally when we try to power on but only for 3 or 4 seconds.
    So mark this thread solved please.
    Enjoy your X6.
    Cheers.

  • Issue - BI content server(11.1.1.1) not starting in obiee 11g:

    Hello All,
    BI content server(11.1.1.1) is not starting in obiee 11g after making OBIEE 11g services as windows service.
    Services are starting when we do a Start BI Services from All Programs >> OBIEE. On the contrary, when we start from windows service "bi content server(11.1.1.1) not starting in obiee 11g" is not starting.
    Can someone help me on this. In case if you need any more info, please let me know.
    Thank you,
    Bimal

    Below is the BI Script I used. Everything is in this script so no need to edit the installsvc file. Just edit the location/variables used as well as at the bottom change the name of the script and the log location. The BI_ORACLE_HOME variable needs to be set in the script.
    SETLOCAL
    set DOMAIN_NAME=bifoundation_domain
    set USERDOMAIN_HOME=D:\oracle\Middleware\user_projects\domains\bifoundation_domain
    set SERVER_NAME=bi_server1
    set PRODUCTION_MODE=true
    set ADMIN_URL=http://djaxwapp9608.common.ecamericas:7001
    set JAVA_HOME=D:\Oracle\Middleware\Oracle_BI1\jdk
    set DOMAIN_HOME=D:\oracle\Middleware\user_projects\domains\bifoundation_domain
    set WLS_HOME=D:\Oracle\Middleware\wlserver_10.3
    set INSTANCE_HOME=D:\oracle\Middleware\instances\instance1
    set BI_ORACLE_HOME=D:\oracle\Middleware\Oracle_BI1
    set ANT_HOME=%MW_HOME\modules\org.apache.ant_1.7.1
    set DOMAIN_NAME=bifoundation_domain
    Call "D:\Oracle\Middleware\user_projects\domains\bifoundation_domain\bin\setDomainEnv.cmd"
    set WL_HOME=D:\Oracle\Middleware\wlserver_10.3
    call "%WL_HOME%\common\bin\commEnv.cmd"
    @rem Check that the WebLogic classes are where we expect them to be
    :checkWLS
    if exist "%WL_HOME%\server\lib\weblogic.jar" goto checkJava
    echo The WebLogic Server wasn't found in directory %WL_HOME%\server.
    echo Please edit your script so that the WL_HOME variable points
    echo to the WebLogic installation directory.
    goto finish
    @rem Check that java is where we expect it to be
    :checkJava
    if exist "%JAVA_HOME%\bin\java.exe" goto runWebLogic
    echo The JDK wasn't found in directory %JAVA_HOME%.
    echo Please edit your script so that the JAVA_HOME variable
    echo points to the location of your JDK.
    goto finish
    :runWebLogic
    if not "%JAVA_VM%" == "" goto noResetJavaVM
    if "%JAVA_VENDOR%" == "BEA" set JAVA_VM=-jrocket
    if "%JAVA_VENDOR%" == "HP" set JAVA_VM=-server
    if "%JAVA_VENDOR%" == "Sun" set JAVA_VM=-server
    :noResetJavaVM
    if not "%MEM_ARGS%" == "" goto noResetMemArgs
    set MEM_ARGS=-Xms32m -Xmx200m
    :noResetMemArgs
    @echo on
    set CLASSPATH=%WEBLOGIC_CLASSPATH%;%CLASSPATH%
    @echo ***************************************************
    @echo * To start WebLogic Server, use the password *
    @echo * assigned to the system user. The system *
    @echo * username and password must also be used to *
    @echo * access the WebLogic Server console from a web *
    @echo * browser. *
    @echo ***************************************************
    rem *** Set Command Line for service to execute within created JVM
    @echo off
    set MEM_ARGS=-Xms256m -Xmx512m -XX:MaxPermSize=512m -XX:-UseSSE42Intrinsics
    if "%ADMIN_URL%" == "" goto runAdmin
    @echo on
    set CMDLINE="%JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath \"%CLASSPATH%\" -Dweblogic.Name=%SERVER_NAME% -Dweblogic.management.username=%WLS_USER% -Dweblogic.management.server=\"%ADMIN_URL%\" -Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE% -Djava.security.policy=\"%WL_HOME%\server\lib\weblogic.policy\" weblogic.Server"
    goto finish
    :runAdmin
    @echo on
    set CMDLINE="%JAVA_VM% %MEM_ARGS% %JAVA_OPTIONS% -classpath \"%CLASSPATH%\" -Dweblogic.Name=%SERVER_NAME% -Dweblogic.management.username=%WLS_USER% -Dweblogic.ProductionModeEnabled=%PRODUCTION_MODE% -Djava.security.policy=\"%WL_HOME%\server\lib\weblogic.policy\" weblogic.Server"
    :finish
    rem *** Set up extrapath for win32 and win64 platform separately
    if "%WL_USE_X86DLL%" == "true" set EXTRAPATH=%WL_HOME%\server\native\win\32;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\32\oci920_8
    if "%WL_USE_IA64DLL%" == "true" set EXTRAPATH=%WL_HOME%\server\native\win\64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\64\oci920_8
    if "%WL_USE_AMD64DLL%" == "true" set EXTRAPATH=%WL_HOME%\server\native\win\x64\;%WL_HOME%\server\bin;%JAVA_HOME%\jre\bin;%JAVA_HOME%\bin;%WL_HOME%\server\native\win\x64\oci920_8
    rem *** Install the service
    "%WL_HOME%\server\bin\beasvc" -install -svcname:"3.Oracle BI 11g BI Server" -javahome:"%JAVA_HOME%" -execdir:"%USERDOMAIN_HOME%" -maxconnectretries:"%MAX_CONNECT_RETRIES%" -host:"%HOST%" -port:"%PORT%" -extrapath:"%EXTRAPATH%" -password:"%WLS_PW%" -cmdline:%CMDLINE% -log:"D:\Oracle\Middleware\ServiceStartLogs\BIServer-stdout.txt"
    ENDLOCAL
    Edited by: J.A.M on Mar 31, 2012 8:51 AM

  • Oracle: Unsupported syntax for refreshRow()

    Good morning everybody!
    I'm facing the following problem: When I execute a query like
    SELECT a, b, c FROM t ORDER BY ain an Oracle database I get the following exception
    java.sql.SQLException: operation not allowed: Unsupported syntax for refreshRow() after executing ResultSet.next() ten times.
    Somewhere I found a workaround: this sentence works OK in Oracle
    SELECT * FROM (SELECT a, b, c FROM t ORDER BY a)but doesn't work in Access, so my question is, Does anybody know how to make this work in any database?
    TIA

    You may be suing
    ResultSet.TYPE_SCROLL_SENSITIVE,
    ResultSet.CONCUR_READ_ONLY
    if you are using scrollable resultset I think you have set parms through ? ? ? not as 'where emp = '222' and empname ='jackson'
    I mean use the preparedStat.setString(1,empVal) etc etc that works
    for scrollable resultset
    Thanks
    [email protected]

  • DAC 11G Installation - Server Does not start up

    Hi All,
    I have recently installed DAC 11G with all the relevant combinations software (Oracle Database 11G, OBIEE 11G, DAC 11G and Informatica 9.1.0) on a 64 bit Windows server. Everything is working fine except for the DAC server. In version 11G, there is no separate component to start the server as we have it in earlier versions. When the Client option is clicked, it runs the server and opens the client but it is not really connected to the server.
    If I go to the startserver.bat and execute it, I get the below message.
    " Windows cannot find '-server'. Make sure you typed the name correctly, and then try again :
    Content in the startserver.bat
    title Oracle DAC Server
    call config.bat
    Rem Uncomment the below if you want to see a DOS window with messages.
    Rem and comment out the JAVAW line.
    Rem
    Rem %JAVA% -Xms256m -Xmx1024m -cp %DACCLASSPATH% com.siebel.etl.net.QServer
    Rem
    start %JAVAW% -server -Xms256m -Xmx1024m -cp %DACCLASSPATH% com.siebel.etl.net.QServer
    Options I have tried:
    I have also tried all combinations of updating the server name (system name) as localhost or the actual name of the system.
    Update the config.bat with the server information but the error keeps popping up.
    Am I missing something here?
    Thank you for your time and suggestions on this.
    Regards,
    Sid

    Actually i see the status changed to Orange after reinstalling the DAC11 with all these setup. But still i have an issue with Informatica Servers. I could not able to connect them... I used the proper connections for Repository and Integration services... I am using 4006 as Integration ServerPort and 6005 as Repository port.
    Do you guys see any issues with 64 bit informatica with 64 bit Oracle and ODBC connections? I have win 7 64bit OS and all 64 bit softwares. But i think informatica by default points to 32 bit ODBC. Not sure how to change this to 64 bit ODBC. 64 bit ODBC (odbcad32.exe) will be in c:/windows/system32 and 32 bit odbc(odbcad32.exe) will be in c:/windows/syswow64 folder... Right now i see informatica pointing 32 bit ODBC. Any body knows how we can point informatica to 64 bit ODBC? There is a powmart.ini file contains all these ODBCDLL files. Oracle=ORAODBC.DLL, but not sure where this file was referred in informatica installations. Anybody has any clue and how we can point informatica 64bit software to 64 bit ODBC?
    Srikanth

Maybe you are looking for

  • Can I use vouchers to purchase iTunes Store music in another country?

    Someone suggested that I can buy iTunes Store vouchers from eBay and then click "REDEEM" on iTunes Store to buy music EVEN IF I live in a country which does not have iTunes Store. But Apple is trying to make life really difficult for us. In the Q&A s

  • SuperDrive not working properly

    I have an '07 black MacBook (Macbook3,1) with a dysfunctional slot-loading SuperDrive. I put in a disk and I have to push it almost 7/8 of the way on before it accepts it. It spins for about 10 seconds before it spits it back out. I've tried using di

  • Date Logic in Personnel Administration

    Hi, I need to choose two different Start dates in Infotype 0000 and Infotype 0001 while running the hiring action through PA40. However, system is not allowing me to do so. My client needs to track the Date of Joining as the start date of Actions and

  • Cost center in miro

    Hiii experts... user are trying to post through miro... made config in okb9 BA vise and gave 2 Ba and 2 cost centers to it..now when the user is posting in BA 2 .. its still catching BA and CC of plant 1.. i will provide u the screenshot of OKB9... p

  • BW - additional field in infoset

    Hi all , I used data source with infoset and I added additional field into infoset . But additional fields did not come to the data source selection screen ( Field list screen ).  Is there a way to do this ? Can anyone help me ? Thnks a lot ..