11g - how to enable the sql logging
hi, experts,
I cannot find the way to enable the sql logging (into nqquery.log)
how to set it?
I cannot find the way to enable the sql logging (into nqquery.log)The SQL logging can be set in the Administration tool >>Manage>>Security >>users and double click on the user and set the logging level . Best option is to use logging level=2
http://www.artofbi.com/index.php/2009/07/obiee-logging-security-restrictions-and-levels/
(OR) if you want to specify only for a single report and if you have the privileages as the Administrator then you can do at report level by going to
Advance tab>> prefix section >> Set Variable LOGLEVEL=2;
write it the same way because it sometimes acts case sensitive.Then save it.
hope answered.
Cheers,
KK
Similar Messages
-
How to enable the Exchange 2010 Admin Audit logs in Event Viewer
How to enable the Exchange 2010 Admin Audit(Mailbox Auditing) logs in Event Viewer.
- Sivashankar. Please mark as answer/useful if my contribution is helpfulHi Siva,
We could execute the command below to view Administrator Audit Logging settings:
Get-AdminAuditLogConfig
If it is not enabled, please run the command below:
Set-AdminAuditLogConfig -AdminAuditLogEnabled $True
In addition, here are some references for you to utilize this feature:
Configure Administrator Audit Logging :
http://technet.microsoft.com/en-us/library/dd335109(v=exchg.141).aspx
Search the Administrator Audit Log :
http://technet.microsoft.com/en-us/library/ff459262(v=exchg.141).aspx
Regards,
Rebecca Tu
TechNet Community Support -
How to view the login log in window NPS after login cisco switch and without SQL server database
how to view the login log in window NPS after login cisco switch and without SQL server database
in summary
there is only log with event id 4400
A LDAP connection with domain controller XCPAWS20.cyberport.noc for domain NOC2 is established.Hi adil,
For your issue, you can create a custom security token service (STS) and then set up a trust relationship between a SharePoint 2010 farm and the custom STS.
For more information, you can refer to the articles:
http://forums.asp.net/t/1335229.aspx?Sharing+Authentication+Ticket+Between+ASP+NET+and+Sharepoint
https://msdn.microsoft.com/en-us/library/office/ff955607(v=office.14).aspx
http://www.paraesthesia.com/archive/2011/02/01/working-with-windows-identity-foundation-in-asp-net-mvc.aspx/
Best Regards,
Eric
Eric Tao
TechNet Community Support -
How to disable the archive logs in SAP IDES(Windows) using SQL Server
can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?
Hi,
Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
http://support.microsoft.com/kb/873235 - check this microsoft article
This will help in reduction of the size of the transcation log.
- Regards, Dibya -
Hi All
Does anyone know how to enable the "Delete" key for logging on the Windows 7 partition on the latest iMac, via the latest Apple wireless keyboard - the standard wired apple keyboard works fine via this key but not the new wireless keyboard?
Many ThanksHoly crap, this fixes the issue. At least temporarily it has. I should add that my issue was single finger forward/back swipe stopped working on the magic mouse in Firefox since Mavericks came along. I have been fighting this since I upgraded to Mavericks a few months ago. Thank you, tbirdvet. You have no idea how much easier you just made using my iMac again.
Message was edited by: wadems -
How to Enable the Oracle BPM Worklist?
Hi!
Newbie here.
So how do you enable the Oracle BPM Worklist?
Sure there a tutorial for this found in http://docs.oracle.com/cd/E21764_01/doc.1111/e17366/chapter16.htm#BABHCICI
and in section "16.2 How to Enable the Oracle BPM Worklist" it says
"By default, Oracle BPM Worklist functionality is disabled. You can enable this functionality in AIAConfigurationProperties.xml.
To enable the Oracle BPM Worklist:
-Access AIAConfigurationProperties.xml located in <AIA_HOME>/aia_instances/$INSTANCE_NAME/AIAMetaData/config.
-Set the EH.INVOKE.HWF property value to true.
-Reload updates to the AIAConfigurationProperties.xml file."
However upon searching for the file "AIAConfigurationProperties.xml" or even the directory "aia_instances" in our servers, I could not find them. Please help me!If you are talking about 11g Worklist app, then you won't be able to do that, since the source code is not shipped with the product. The better way is to create the custom worklist application using the Worklist APIs. Refer to the SOA Developers Guide.
In case of 10g, you can access the source code of Worklist app, even in that case, you can do your requirement using the exposed APIs. -
Urgent : How to do the SQL trace analysis
Hi Floks,
How to do the SQL Trace analysis and any another tools is there to test abap programming then this tools runtime analysis,extended Programming Checking,Code inspector .How to utilize that tools .please forward me
thanks
sureshHI,
<b>SQL Trace Use:</b>
The SQL Trace function is an on-demand log of selected SQL statements that are issued against the database through the Open SQL Engine. The SQL Trace can be switched on or off dynamically. The log format is database independent. Besides the SQL statement text, each log record contains information about the point in time when the statement was executed, its duration, its input parameters and results (where applicable) as well as context information.
<b>
Features</b>
The SQL Trace is especially useful for:
Development
SQL Trace can help JDO, enterprise beans, servlet and JSP developers to learn which kind of database accesses their code produces.
1. Performance analysis
Typically, performance issues are caused by inefficient database accesses. In this case SQL Trace can be used to show the issued SQL statements and their duration, thus helping to identify inefficient SQL statements.
<b>Activities</b>
Typically, you should use the SQL Trace when you need to check the behavior of a particular application. This is the following scenario:
Look at the below links, you will get the idea
http://help.sap.com/saphelp_erp2005/helpdata/en/d1/801f89454211d189710000e8322d00/content.htm
Re: Runtime Analysis vs SQL Trace
http://www.sapbrain.com/TOOLS/SQLTRACE/SQL_TRACE.html -
Where to find the SQL log by crystal reports
i want to watch the sql log by crystal report loading,but i don't know how to find it , somebody knows it? thanks advanced!
Hi Wang,
If you mean to look at the SQL query CR generates, then open the report in the CR Designer > Go to the Database option on the top > Click Show SQL.
-Abhilash -
Hi Team,
I am doing database Refreshment. I want to monitor the alert logs.
Please suggest me, How to open the alert logs. Working on unix server.
Thanks & Regards,if its 10g then go to bdump directory
you can either do tail -f <alert_log_name>
or vi <alert_log_name>
if 11g then you want should go to
$ORACLE_HOME/diag/$ORACLE_SID
the alert log file is in XML format as well as a text file. The default location of both these files is the new ADR home or Automatic Diagnostic Respository. The ADR is set by using the DIAGNOSTIC_DEST initialization parameter. The location of an ADR home is ADR_BASE/diag/product_type/product_id/instance_id. If the environment variable ORACLE_BASE is not set then DIAGNOSTIC_DEST is set to ORACLE_HOME/log
there are different directories for different types of alert log files
alert - The XML formatted alertlog
trace - text alert log -
How to find the SQL Server Instances running across the given activer directory domain?
How to find the SQL Server Instances running across the given activer directory domain?
I have though of OSQL -L , Microsoft Assessment and Planning ( MAP ) tool and SQLPing3 (SQLSecurity) might help me.
I would appreciate if there any other way of finding the SQL Servers / Instances running across the given active directory domain.
Sivaprasad S
http://sivasql.blogspot.com
Please click the Mark as Answer button if a post solves your problem!Dear ,
Very simple u find all instances through the customized sp which is get all details about inventory. Like i put the sp bellow. This is without any tool.
USE [master]
GO
/****** Object: StoredProcedure [dbo].[DBStatus] Script Date: 08-01-2015 19:46:11 By Damodar Patle Sr. DBA Mumbai India ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[DBStatus]
AS
SELECT
SERVERPROPERTY('servername') AS ServerName,
ConnectionProperty('local_net_address') AS 'local_net_address',
ConnectionProperty('local_tcp_port') AS 'local_tcp_port',
CONVERT(VARCHAR(25), @@VERSION) as VERSIONSQL,
SERVERPROPERTY('ErrorLogFileName') AS ErrorLogFilePath,
database_id,
CONVERT(VARCHAR(25), DB.name) AS DBName,
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'status')) AS [Status],
CONVERT(VARCHAR(10), DATABASEPROPERTYEX(name, 'Recovery')) AS [Recovery_Model],
create_date as DBCreate_Date, --physical_device_name,
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS DataFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS [Data MB],
(SELECT COUNT(1) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LogFiles,
(SELECT SUM((size*8)/1024) FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS [Log MB],
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'rows') AS MDF_File_Location,
(SELECT physical_name FROM sys.master_files WHERE DB_NAME(database_id) = DB.name AND type_desc = 'log') AS LDF_File_Location,
user_access_desc
FROM sys.databases DB
ORDER BY dbName, [Log MB] DESC, NAME -
How to enable the S-Video port on a Satelite M30X-154?
Hey does any one know how to enable the S-Video port on a Satellite SM30X-154 laptop?
If I press the FN+5 keys the only options I get is LCD and no S-VHS option. My TV is set up for it as I watch DVD's through the cable.
When I connect the cable to the laptop, nothing happens!!
HELPHi,
Sorry, my Tosh A100 has a Geforce 7600, I don't know what your GA is.
But on mine I have a NVidia Control Panel, where I can configure dualview,
which normally lets me choose between the builtin LCD and the extern monitor (VGA-Port).
When a TV is connected and not recognized, I can enforce recognition there.
On the next start of the panel, the TV is then available too.
Perhaps I could help you.
If not, note that with windows settings your TV will not be available.
Try to go to the User Interface of your graphics adapter...
Matz -
How to view the sql query?
hi,
how to view the sql query formed from the xml structure in the receiver jdbc?You can view SAP Note at
http://service.sap.com/notes
But you require SMP login ID for this which you should get from your company. The content of the notes are as follows:
Reason and Prerequisites
You are looking for additional parameter settings. There are two possible reasons why a feature is available via the "additional parameters" table in the "advanced mode" section of the configuration, but not as documented parameter in the configuration UI itself:
Category 1: The parameter has been introduced for a patch or a SP upgrade where no UI upgrade and/or documentation upgrade was possible. In this case, the parameter will be moved to the UI and the documentation as soon as possible. The parameter in the "additional parameters" table will be deprecated after this move, but still be working. The parameter belongs to the supported adapter functionality and can be used in all, also productive, scenarios.
Category 2. The parameter has been introduced for testing purposes, proof-of-concept scenarios, as workaround or as pre-released functionality. In this case, the parameter may or may not be moved to the UI and documentation, and the functionality may be changed, replaced or removed. For this parameter category there is no guaranteed support and usage in productive scenarios is not supported.
When you want to use a parameter documented here, please be aware to which category it belongs!
Solution
The following list shows all available parameters of category 1 or 2. Please note:
Parameter names are always case-sensitive! Parameter values may be case-sensitive, this is documented for each parameter.
Parameter names and values as documented below must be used always without quotaton marks ("), if not explicitly stated otherwise.
The default value of a parameter is always chosen that it does not change the standard functionality
JDBC Receiver Adapter Parameters
1. Parameter name: "logSQLStatement"
Parameter type: boolean
Parameter value: true for any string value, false only for empty string
Parameter value default: false (empty String)
Available with: SP9
Category: 2
Description:
When implementing a scenario with the JDBC receiver adapter, it may be helpful to see which SQL statement is generated by the JDBC adapter from the XI message content for error analysis. Before SP9, this can only be found in the trace of the JDBC adapter if trace level DEBUG is activated. With SP9, the generated SQL statement will be shown in the details page (audit protocol) of the message monitor for each message directly.
This should be used only during the test phase and not in productive scenarios.
Regards,
Prateek -
How to get the job logs from sm35 by using the queue id and session name?
hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushikHi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin -
How to use the change log in ODS to track Delta change?
People say that historical data (like Delta change) in ODS can be tracked in the Change Log. How to use the change log to track historic data?
ThanksKevin
See if it helps
Every ODS object is represented on the database by three transparent tables:
Active data: A table containing the active data (A table)
Activation queue: For saving ODS data records that are to be updated but that have not yet been activated. The data is deleted after the records have been activated.
<b>Change log: Contains the change history for delta updating from the ODS Object into other data targets, such as ODS Objects or InfoCubes for example.</b>
An exception is the transactional ODS object, which is only made up of the active data table.
The tables containing active data are constructed according to the ODS object definition, meaning that key fields and data fields are specified when the ODS object is defined. Activation queue and change log are the same in the tables structure. They have the request ID, package ID and the record number as a key.
Data base structure changes
http://help.sap.com/saphelp_nw04/helpdata/en/d2/d53ec3efdc9b47a9502c3a4565320c/frameset.htm
Hope this helps
Thnaks
Sat -
*HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*
HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
My archivelog files are not deleted on standby.
I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
JSetting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
like to clean them off with RMAN.
I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
Example :
#!/bin/bash
# Name: db_rman_arch_standby.sh
# Purpose: Database rman backup
# Usage : db_rman_arch_standby <DBNAME>
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
exit 1
fi
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
echo ${DBNAME}
MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
# End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
Example ( STANDBY.env )
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=STANDBY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
#export TERM=linux=80x25 wrong wrong wrong wrong wrong
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
There are probably ten other/better ways to do this, but this works.
other options ( you decide )
Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
Best Regards
mseberg
Edited by: mseberg on May 8, 2012 11:53 AM
Edited by: mseberg on May 8, 2012 11:56 AM
Maybe you are looking for
-
I just bought a macbook pro, and im running a pc with the latest version of itunes and im needing to know if its possible to tranfser music libraries using an ipad or ipod touch.
-
Hi Guys, I'm a bit new in oracle can you guys help me I installed oracle 10g on my machine it installed successfully but the problem comes when I try to go to the home page(for creating my tables and stuff ) it tells it can not find the page, which i
-
Error during subcontracting goods receipt
Hi, I'm receiving the following error message when performing a goods receipt of a subcontracting PO for an article variant in SAP Retail ECC6. Check table MDVW: entry 2 does not exist Message no. M7001 The error does not occur for single article ite
-
Can't stream videos from Iphone 4 or Ipad 3 to apptv 3
Folks need some help- I love Mac and all the products but I am having a bit of an unpleasant experience with my apple tv 3. I have Iphone-4, Ipad 3rd gen, and Apple Tv 3rd gen. I want to use airplay to stream videos from safari or netflix- but! I g
-
Hi, Which BAPI is used for uploading Vendor Master including withholding tax details and bank details through LSMW Method or please suggest me the direct input program for the above details mentioned Method : LSMW immdetiate solution is appreiciable