How to get the job logs from sm35 by using the queue id and session name?

hi all,
can any one please let me know how to read the job log from sm35 by using the session name and queue id. i have the job name and job count but is it possible to download the job log by using the queue id and session name.
FYI..
i want to read this job log and i want to send it to an email id.
-> i am using the job_open and submitting the zreport via job name and job count and then i am using the function module job_close.
but this is not working in my scenario i have the queue id and session name by using this two i want to get the job log is there any function module available or code please provide me some inputs.
thanks in advance,
koushik

Hi Bharath,
If you want to download it to the local file then you can follow the instructions in the below link.
How to download Batch Input Session Log?
Regards,
Sachin

Similar Messages

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !

I have lost sound on my iPad in apps unless I use headphones ,does anyone know how to get sound back without them .I have used the mute volume on the bar at bottom of screen and the slider volume control there only shows when headphones are plugged in !
I also tried resetting settings all to no avail ...I looked up some advice and watched utube video advice on how to fix without success..
The volume control button on side does not work ,I got the iPad last August and wonder if it is a fault that means I must return it for replacement from where it was purchased ?

The Retrospect you used way back when is no longer around. The company was sold and that company produced a new version of Retrospect - Retrospect 8.x
So, as you've been told, you would have to be running a Tiger system with an old version of Retrospect software (5.x or 6.x - you would need to know) assuming you can find the software.
As best I can remember you cannot extract files from a Retrospect backup except using the software since Retrospect did not normally make a file by file backup rather it created an archive of the files in the backup. I'm assuming that the EMC/Retrospect people have told you that old Retrospect backups are not accessible by Retrospect 8.x?

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

I know that how to convert any documents to pdf file, but don't know how to get barcode on it. I am using windows 8.1. and want to see barcode on my documents before the print. Please help.

Hi Frank ,
Please refer to the following link and see if this helps.
https://helpx.adobe.com/acrobat/kb/error-organizer-database-damaged-reset-1.html
Regards
Sukrit Dhingra

How to get a Sum of rows, when i use the property max. rows p. page ?

Hi all.
I've got a query and get a lot of rows (amounts) back.
Now i want to have max. 21 rows per page.
So, first i used the property "max. rows p. page"=21.
But i want a have Sum-Field p.page too, which shows the sum of the amount p. page at a >fixed place (bottom, left) at the page.
this didnt work well....
Because when i have 30 rows, then the sum will shown at the second page (because the sum-field its after the repeating frame).
...Now i forgot the property and placed a function and two placeholder in the query like this:
Function:
:cp_row:=:cp_row +1;
if (mod (:cp_row,21)=0)) then :CP_pagenr:=:CP_pagenr+1;
Placeholders: cp_row, cp_pagenr
Now i want to use :CP_pagenr to change the group - but Report Builder says: I cant... because placeholder are not allowed to change a group.
So.. perhaps anyone can give me a hint how i can do this ?
Thanks a lot...

hello.
that sound to me as you wanted a running total. check out the metalink knwoledge base and search for running total and you will find a note on how to do that.
regards,
the oracle reports team --pw

How do I send a fax from my A210 using the internal modem?

I have an A210 laptop with Windows Vista Home Premium and Office 2007 Professional and use the wireless network card to connect to our broadband modem.
For my business I would like to be able to send faxes through the normal telephone line direct from my laptop, rather than buying a fax machine.
There is a Toshiba Software Modem attached to COM3, but I can't work out how to use it to send a fax.
On older computers I have been able to set up the fax modem as a printer driver and have sent faxes directly from Word using a print-to-fax option.
I can't find anything in the general Windows help or Word help that shows me how to do this on my laptop.
Any suggestions gratefully received.
Gillian

> {quote:title=GillianS wrote:}{quote}
> Any suggestions gratefully received.
> Gillian
I may say that there is no need to buy a fax machine for Faxing sending purposes.As soon an you have a computer and internet connection go ahead and subscribe to Popfax.com Internet Fax Provider. Fax Provider . Low rates and a very professional Customer Care assistance.
I use the The Zoom/Modem V.92 PC Card Plus on my Toshiba laptop - it is a 56K fax modem that plugs into the PCMCIA slot . Good performance and it has an on-board controller and Digital Signal Processor which is a nice feature. Also, has Modem on Hold so when you receive a fax or voice call, you don't lose your Internet connection. Hope this is helpful and good luck!

How do I take a picture from usb camera using the Windows Image Acquisition Automation activex control in LabWindows?

Hy!
I have a faculty project in wich I
have to acquire image from a webcam in Labwindows
8.1 and to take a picture and save it in a file and to display it.I managed to acquire
image from the webcam using the WIA automation activex controll but I
haven't been able to take a picture and save it and display it .So i ask of you to
post a tutorial or something that would help me to take a picture and save it and display it using the WIA automation activex controll in
LabWindows.
OS: Windows XP Professional X86
Please help me!!

Unfortunetly I do not have any experience with Activex.This is one of the codes I tried so far:#include "wiaaut.h"
#include <cvirte.h>
#include <userint.h>
#include "camm.h"
static int panelHandle;
   int cid,eroare;
   CAObjHandle objh;
   WIAObj_IImageFile result;
   ERRORINFO eror;
int main (int argc, char *argv[])
   if (InitCVIRTE (0, argv, 0) == 0)
       return -1;   /* out of memory */
   if ((panelHandle = LoadPanel (0, "camm.uir", PANEL)) < 0)
       return -1;
   DisplayPanel (panelHandle);
   RunUserInterface ();
   DiscardPanel (panelHandle);
   return 0;
int CVICALLBACK OkCallback (int panel, int control, int event,
       void *callbackData, int eventData1, int eventData2)
   switch (event)
       case EVENT_COMMIT:
           WIA_NewIVideoPreview(panelHandle,"Video",45,45,&cid,&eroare);
           GetObjHandleFromActiveXCtrl(panelHandle,cid,&objh) ;
           break;
   return 0;
int CVICALLBACK QuitCallback (int panel, int control, int event,
       void *callbackData, int eventData1, int eventData2)
   switch (event)
       case EVENT_COMMIT:
           QuitUserInterface (0);
           break;
   return 0;
int CVICALLBACK pozaCallback (int panel, int control, int event,
       void *callbackData, int eventData1, int eventData2)
   switch (event)
       case EVENT_COMMIT:
           WIA_NewICommonDialog(panelHandle,"poza",45,400,&cid,&eroare);
           WIA_ICommonDialogShowAcquireImage(objh,&eror,2,1,131072,"{B96B3CAB-0728-11D3-9D7B-0000F81EF32E}",VTRUE,VTRUE,VTRUE,&result);
           break;
   return 0;

I am having problems setting the gain programatically from Labview 6, using the Hardware Config vi, for a PCI6110E DAQ board.

NB: This has also been posted to High Speed Digitizers forum.
Changing the "gain" (part of the "alternate input limits" cluster) appears to affect the group settings, but when I pass a signal outside the supposed new voltage range, the signal doesn't clip as I would expect. This doesn't happen when I use MAX (where clipping is clearly visible), but unfortunately that is not an acceptable long-term solution. Any thoughts? I am only using allowable gain settings for the 6110E.
Additionally, I am saving my data in hsdl format, and to get the actual true voltage from the binary numbers (after uncompressing and converting back to standard binar
y format) I need to multiply the final number by the gain. Should this be correct? I thought the "scale multiplier" (part of "group settings cluster") compensated for "gain", but it doesn't seem to do so. Is this part of the same problem?

Thanks Spencer. I do call Hardware Config.vi in several different places, so maybe its the multiple calls that is stuffing things up. I will investigate further.
As for the multiplier, which bit sounds correct? The fact that I have to multiply by the gain, or that it should take this into account automatically and therefore not have to muliply by the gain (which is what the default hsdl code does). What do you do to convert from binary to real?
Thanks for your help,
Jo

How to get current row value from table when press the submit button

Hi,
I want to get the current row value of SuccessionPlanId which is one of the column in a advanced table.
I created one button (created using personalization, action fired thru CO)in the table as column, so each row having one button, if i press the first row's button means then i want to fetch the first row's SuccessionPlanId and if it is 3rd means then i want to get the value of third row's value.
How to do it in controller extension?
Please reply soon, its urgent.
Thanks in advance,
SAN

Pratap,
Yes, I tried with 'delete' button which is seeded one.
For this, our code using row reference is working too fine. it throws exact SuccessionPlanId value of corresponding row.
I created MessageStyledText, but here i need to give text value right, then only it 'll appear in the page.
Instead i created one image and fired explicitly from the controller processRequest method.
But the same problem remains..
here my code:
public void processRequest(OAPageContext pageContext, OAWebBean webBean){
super.processRequest(pageContext, webBean);
OAButtonBean oabb = (OAButtonBean)webBean.findChildRecursive("XXSubmit");
FireAction action = new FireAction("XXSubmit");
oabb.setAttributeValue(UIConstants.PRIMARY_CLIENT_ACTION_ATTR, action);
OAImageBean oaib=(OAImageBean)webBean.findChildRecursive("XXSubmitImage");
oaib.setFireActionForSubmit("XXSubmitImage", null, null, true);
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean){
if("XXSubmitImage".equals(pageContext.getParameter("event"))){
String succIdI="";
String rowRefI = pageContext.getParameter(OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
if(rowRefI != null && !("".equalsIgnoreCase(rowRefI ))){
PerSuccPlanSearchVORowImpl rowI = (PerSuccPlanSearchVORowImpl)oaam.findRowByRef(rowRefI);
if(rowI != null)
succIdI=rowI.getAttribute("SuccessionPlanId").toString();
}else{
throw new OAException("Row is null");
throw new OAException(succIdI, OAException.INFORMATION);
}else{
super.processFormRequest(pageContext, webBean);
If i run the page using this controller, it throws exception without any value, because for 'succIdI' i initialized without any string.
Can you please suggest me how to solve?

How to get latest added file from a folder using apple script

Hi..
I am trying to get a latest added file from a folder..and for this i have below script
tell application "Finder"
    set latestFile to item 1 of (sort (get files of (path to downloads folder)) by creation date) as alias
    set fileName to latestFile's name
end tell
By using this i am not able to get latest file because for some files the creation date is some older date so is there any way to get latest file based on "Date Added" column of a folder.

If you don't mind using GUI Scripting (you must enable access for assistive devices in the Accessibility System Preference pane), the following script should give you a reference to the last item added to any folder. Admittedly not the most elegant solution, but it works, at least under OS X 10.8.2.
set theFolder to choose folder
tell application "Finder"
    activate
    set theFolderWindow to container window of theFolder
    set alreadyOpen to exists theFolderWindow
    tell theFolderWindow
        open
        set theInitialView to current view
        set current view to icon view
    end tell
end tell
tell application "System Events" to tell process "Finder"
    -- Arrange by None:
    set theInitialArrangement to name of menu item 1 of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "0" using {control down, command down}
    -- Sort by Date Added:
    set theInitialSortingOrder to name of menu item 1 of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1 whose value of attribute "AXMenuItemMarkChar" is "✓"
    keystroke "4" using {control down, option down, command down}
    -- Get the name of the last item:
    set theItemName to name of image 1 of UI element 1 of last scroll area of splitter group 1 of (window 1 whose subrole is "AXStandardWindow")
    -- Restore the initial settings:
    click menu item theInitialSortingOrder of menu 1 of menu item "Sort By" of menu 1 of menu bar item "View" of menu bar 1
    click menu item theInitialArrangement of menu 1 of menu item "Arrange By" of menu 1 of menu bar item "View" of menu bar 1
end tell
tell application "Finder"
    set current view of theFolderWindow to theInitialView -- restore the initial view
    if not alreadyOpen then close theFolderWindow
    set theLastItem to item theItemName of theFolder
end tell
theLastItem
Message was edited by: Pierre L.

How to: Get a list of mail users by using the Exchange Management Shell

Hello every one, quick question: When I run this code below for VB, how will I see the results of the program? Is there anyway I can make the results appear in a message box?
Function GetUsersUsingBasicAuth( _
    ByVal LiveIDConnectionUri
As String, ByVal ScehmaUri
As String, _
    ByVal Credentials
As PSCredential, ByVal
Count As Integer)
As Collection(Of PSObject)
    Dim ConnectionInfo
As WSManConnectionInfo = _
        New WSManConnectionInfo(New Uri(LiveIDConnectionUri), ScehmaUri, Credentials)
    ConnectionInfo.AuthenticationMechanism = AuthenticationMechanism.Basic
    Dim RemoteRunspace
As Runspace
    RemoteRunspace = RunspaceFactory.CreateRunspace(ConnectionInfo)
    Return GetUserInformation(Count, RemoteRunspace)
End Function
Function GetUserInformation(ByVal
Count As
Integer, ByVal RemoteRunspace
As Runspace) As Collection(Of PSObject)
    Dim RemotePowerShell
As PowerShell = PowerShell.Create
    RemotePowerShell.AddCommand("Get-Users")
    RemotePowerShell.AddParameter("ResultSize",
Count)
    ' Open the remote runspace on the server.
    RemoteRunspace.Open()
    ' Associate the runspace with the Exchange Management Shell.
    RemotePowerShell.Runspace = RemoteRunspace
    ' Invoke the Exchange Management Shell to run the command.
    Return RemotePowerShell.Invoke
End Function

All you need to do is enumerate through the Collection returned eg
Dim commandResults As Collection(Of PSObject)
commandResults = RemotePowerShell.Invoke()
For Each obj As PSObject In commandResults
MessageBox.Show(obj.Properties("DisplayName").Value.ToString())
Next
Cheers
Glen

Job logs from the original system after Unicode conversion.

Dear Globalization experts,
We are doing Unicode conversion and would like to know, if the Job logs from the batch jobs, executed before conversion (system with a 1100 code page), would be readable in the Unicode system after the conversion. We will move job log files from the source to the target system. I . Thank you in advance for your help.
Best regards,
Alik Shapiro

Hi Alik,
I have strong doubts that this will work ...
From SAP notes 842767 and 901004 you can see, that spool data will not be converted properly by default.
In general this is valid for data stored in TemSe, as this is by definition temporary data (see for example http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a8f9c51ea11d189570000e829fbbd/content.htm ).
However I actually did not test it, so I am not 100% sure.
Best regards,
Nils Buerckel
SAP AG

How to send a job log/Spool once the job completed?

Could you please help me how to send a job log/Spool once the job completed.
There was an option is available System Send mail to send a mail once the job completed . So could you please help me how we can send a job log using this option .
I have tried the below but i didn't get any mail . Could some one help this please !
For example :
Job chain name : Test_spool
                Step1 : Reportstep
                                Job definition u2013 XXX_YYY
                Step2: Mailstep
                                Job definition: system_mail_send
Expression : Reportstep,job<(what i need to mention here )>:reportstep/log.txt
Check the ablove mentioned is correct and correct me , still i didnu2019t get the log in the mail please .
Thanks
Ramkumar

Hi Ram,
I need your help on getting mail alert with log file.
here is how i have provide the parameter valure for job definition: system_mail_sent.
Step1 with one job1 and step2 with one job1
In step2 , i have included the job definition to send mail. with below parameter.
Relative Job: Step 1, Job 1
Job File: step 1, job 1: step 1/log.txt
Please let me know if the above method is correct or not.
NOTE: mail server and from address are configured.
Thanks,
Karthik

How to send a job log/Spool once the job completed in an other Jobchain

I have a Jobchain which raises events when Job goes to status error.
After that a job starts which sends a mail. In this Job I have the parameter:
raising_job_id:
=waitEvents.NSN_JOB_ON_ERRORO.raiserJobId so I can pass the Job ID and send it in the mail.
But how can I also pass the Joblog of the errorjob to the sending mailjob ?
relative_job_id and loblog parameters from system_mail_send job does not work because it's not in the sam Jobchain.
Do I have to use some pre/post running actions ?
I'm not familiar with Java programming
Br
Uwe

Hello,
Then this is your lucky day! Since you already have enough knowledge to get the job id from the raiser event you are already half way there! This is because the System_Mail_Send job also understands an arbitrary job id as a RelativeJob. So if you pass the found job id into the RelativeJob parameter and * into the JobFile parameter all output files from the failed job will be send out.
Regards Gerben

How do I get text to flow from one page to the next in Pages 5?

How do I get text to flow from one page to the next in Pages 5 with the Maverick system?

What may be overlooked in Pages v5 is the notion of combining Text Boxes via the Menu > View > Show Arrange Tools. When you select two Text Boxes, an extra panel unfolds at the bottom of the Arrange Tools window. Uncheck one Text Box and this panel abruptly disappears.
One can achieve text flow effects between Text Boxes differently based on how one positions the Text Box overlap, and choice of effect above. Though not the accustomed flow found in Pages ’09 v4.3, flow does occur. Consider the possibilities of combining a Shape and a Text box to cut an irregular Text box.
If I create two Text Boxes and position them side by side with outline touching and choose Unite, this creates one larger Text Box and text flows across and down. On the otherhand, if I overlap the upper left corner of a lower Text Box over one above and to the left, then choose Union, pasted text fills the first Text Box and then flows across and down into the other box. Here is a Union example:
Intersect will leave a small Text Box where the two overlap, so not much value there. Subtract will cut a chunk out of one Text Box that is the size of the overlapping piece of the second Text Box:
And Intersect will leave an island in the center where the two Text Box overlap, with flow jumping over this bridge.
Clearly, this is not what we were accustomed to in the past, but with imagination, style, and layout tuning, it does offer alternative Text Box creativity and layout. Of course, there is the option of simply returning to the previous Pages version for true Text Box linking that most will want to use.

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

For some reason the system is telling me my birth date is wrong when it's not and it won't let me proceed to reset my password. Can someone tell me how to get a "real" person from tech on line?

contact itunes support

How to get the job logs from sm35 by using the queue id and session name?

Similar Messages

Maybe you are looking for