How to disable the archive logs in SAP IDES(Windows) using SQL Server
can any body tell us How to disable the archive logs in SAP IDES(Windows 2003) using SQL Server 2000.SP4.?
Hi,
Unfortunately, SQL Server does not have the option to turn off transaction logging. You can set the recovery mode to SIMPLE, instead of FULL. This will result in the transaction log being truncated on checkpoint.
http://support.microsoft.com/kb/873235 - check this microsoft article
This will help in reduction of the size of the transcation log.
- Regards, Dibya
Similar Messages
-
How to disable the Super User menu - (Right click windows icon menu) - Server 2012 R2 - RDS
Greetings all,
Can anyone please advise how to remove the Administrator / Super User menu that appears when you right click the Windows Icon (old start button) in Server 2012 R2 - for RDS users. I have searched and been able to disable access to each of these menu items (Control
Panel, Event Viewer, Run, etc). But I am searching for a way to completely remove the menu. This menu also appears when you use Win-X shortcut.
Hope someone can help.
TerryHi Terry,
You can try following points, might helpful in your case. Go to
C:\Users\Default\AppData\Local\Microsoft\Windows
there you will see file called WinX
Right click this file and copy then go to
C:\Users\YOUR_USERNAME\AppData\Local\Microsoft\Windows
then paste the file into the folder.
NOTE: replace YOUR_USERNAME with your actual username.
Hope it helps!
Thanks.
Dharmesh Solanki
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
*HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY*
HOW TO DELETE THE ARCHIVE LOGS ON THE STANDBY
I have set the RMAN CONFIGURE ARCHIVELOG DELETION POLICY TO APPLIED ON STANDBY; on my physical standby server.
My archivelog files are not deleted on standby.
I have set the CONFIGURE ARCHIVELOG DELETION POLICY TO NONE; # default on the Primary server.
I've checked the archivelogs with the FRA and they are not beign deleted on the STANDBY. Do I have to do something for the configuation to take effect? Like run a RMAN backup?
I've done a lot ofresearch and i'm getting mixed answers. Please help. Thanks in advanced.
JSetting the Policy will not delete the Archive logs on the Standby. ( I found a thread where the Data Guard product manager says "The deletion policy on both sides will do what you want" ). However I still
like to clean them off with RMAN.
I would use RMAN to delete them so that it can use that Policy are you are protected in case of Gap, transport issue etc.
There are many ways to do this. You can simply run RMAN and have it clean out the Archive.
Example :
#!/bin/bash
# Name: db_rman_arch_standby.sh
# Purpose: Database rman backup
# Usage : db_rman_arch_standby <DBNAME>
if [ "$1" ]
then DBNAME=$1
else
echo "basename $0 : Syntax error : use . db_rman_full <DBNAME> "
exit 1
fi
. /u01/app/oracle/dba_tool/env/${DBNAME}.env
echo ${DBNAME}
MAILHEADER="Archive_cleanup_on_STANDBY_${DBNAME}"
echo "Starting RMAN..."
$ORACLE_HOME/bin/rman target / catalog <user>/<password>@<catalog> << EOF
delete noprompt ARCHIVELOG UNTIL TIME 'SYSDATE-8';
exit
EOF
echo `date`
echo
echo 'End of archive cleanup on STANDBY'
mailx -s ${MAILHEADER} $MAILTO < /tmp/rmandbarchstandby.out
# End of ScriptThis uses ( calls an ENV) so the crontab has an environment.
Example ( STANDBY.env )
ORACLE_BASE=/u01/app/oracle
ULIMIT=unlimited
ORACLE_SID=STANDBY
ORACLE_HOME=$ORACLE_BASE/product/11.2.0.2
ORA_NLS33=$ORACLE_HOME/ocommon/nls/admin/data
LD_LIBRARY_PATH=$ORACLE_HOME/lib:/lib:/usr/lib
LD_LIBRARY_PATH=$LD_LIBRARY_PATH:/usr/local/lib
LIBPATH=$LD_LIBRARY_PATH:/usr/lib
TNS_ADMIN=$ORACLE_HOME/network/admin
PATH=$ORACLE_HOME/bin:$ORACLE_BASE/dba_tool/bin:/bin:/usr/bin:/usr/ccs/bin:/etc:/usr/sbin:/usr/ucb:$HOME/bin:/usr/bin/X11:/sbin:/usr/lbin:/GNU/bin/make:/u01/app/oracle/dba_tool/bin:/home/oracle/utils/SCRIPTS:/usr/local/bin:.
#export TERM=linux=80x25 wrong wrong wrong wrong wrong
export TERM=vt100
export ORACLE_BASE ORACLE_SID ORACLE_TERM ULIMIT
export ORACLE_HOME
export LIBPATH LD_LIBRARY_PATH ORA_NLS33
export TNS_ADMIN
export PATH
export MAILTO=?? your email hereNote use the env command in Unix to get you settings.
There are probably ten other/better ways to do this, but this works.
other options ( you decide )
Configure RMAN to purge archivelogs after applied on standby [ID 728053.1]
http://www.oracle.com/technetwork/database/features/availability/rman-dataguard-10g-wp-1-129486.pdf
Maintenance Of Archivelogs On Standby Databases [ID 464668.1]
Tip I don't care myself but in some of the other forums people seem to mind if you use all caps in the subject. They say it shouting. My take is if somebody is shouting at me I'm probably going to just move away.
Best Regards
mseberg
Edited by: mseberg on May 8, 2012 11:53 AM
Edited by: mseberg on May 8, 2012 11:56 AM -
How to get the current logged in username from windows and put it into an AS var
Hello,
I was hopeing someone would know how to get the current logged in username from windows and put it into a var, so I can create a dynamic text box to display it.
Thanks in advance
MichaelJust for everyone’s info, this is the script I have used to get the logged in windows username into flash ---- not and air app.
In the html page that publishes with the .swf file under the <head> section:-
<script language="JavaScript" type="text/javascript">
function findUserName() {
var wshell=new ActiveXObject ("wscript.shell");
var username=wshell.ExpandEnvironmentStrings("%username%");
return username;
</script>
The ActionScript:-
import flash.external.ExternalInterface;
var username:String = ExternalInterface.call ("findUserName");
trace (username); // a quick test to see it in output -
How to delete the archive logs.
Hi,
I need to delete the archive logs in standby database which has been generated after created the restore point.
SEQUENCE# APPLIED
17 YES
18 YES
1 NO
2 NO
19 YES
18 YES
21 YES
22 YES
20 YES
23 YES
24 YES
sequence 1,2 has been generated after created the restore point,how can i remove sequence# 1 and 2 from the v$archived_log;
ways i have tried
1.dropped the restore point during that time only the flashback logs has been deleted not the archive log
2.manually tried from rman ,but i was not working.
please help me out....
***points are waiting for you guys****Hi,
I need to delete the archive logs in standby database which has been generated after created the restore point.
SEQUENCE# APPLIED
17 YES
18 YES
1 NO
2 NO
19 YES
18 YES
21 YES
22 YES
20 YES
23 YES
24 YES
sequence 1,2 has been generated after created the restore point,how can i remove sequence# 1 and 2 from the v$archived_log;
ways i have tried
1.dropped the restore point during that time only the flashback logs has been deleted not the archive log
2.manually tried from rman ,but i was not working.
please help me out....
***points are waiting for you guys**** -
SAP Crystal Report using SQL Server Authentication and Windows Authenticati
I'm a SAP Crystal Report, version for Visual Studio 2010 Beginner
my ingredients are
1.windows 7 ultimate service pack1
2.sql server 2008 standard edition
3.visual studio 2010 pro
4.SAP Crystal Report, version for visual studio.net
I was created a report named customersByCity.rpt using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> I'm supply Server, User ID, Password and Database. I assume me using SQL Server Authentication for my report
Then, my ASP.NET files as following
//ASP.NET
<%@ Page Language="C#" AutoEventWireup="true" CodeFile="viewCustomersByCity.aspx.cs" Inherits="viewCustomersByCity" %>
<%@ Register Assembly="CrystalDecisions.Web, Version=13.0.2000.0, Culture=neutral, PublicKeyToken=692fbea5521e1304"
Namespace="CrystalDecisions.Web" TagPrefix="CR" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head runat="server">
<title></title>
</head>
<body>
<form id="form1" runat="server">
<div><asp:Label ID="lblMsg" runat="server" BackColor="Yellow" ForeColor="Black"></asp:Label>
<CR:CrystalReportViewer ID="CrystalReportViewer1" runat="server" AutoDataBind="true"></CR:CrystalReportViewer>
</div>
</form>
</body>
</html>
//code-behind
using System;
using System.Collections.Generic;
using System.Linq;
using System.Web;
using System.Web.UI;
using System.Web.UI.WebControls;
using System.Collections;
using CrystalDecisions.CrystalReports.Engine;
using CrystalDecisions.Shared;
public partial class viewCustomersByCity : System.Web.UI.Page
private const string PARAMETER_FIELD_NAME = "city";
private ReportDocument customersByCityReport;
private void ConfigureCrystalReports()
ConnectionInfo connectionInfo = new ConnectionInfo();
connectionInfo.ServerName = @"WKM1925-PCWKM1925";
connectionInfo.DatabaseName = "Northwind";
connectionInfo.UserID = "sa";
connectionInfo.Password = "sysadmin25";
SetDBLogonForReport(connectionInfo);
private void SetDBLogonForReport(ConnectionInfo connectionInfo)
TableLogOnInfos tableLogOnInfos = CrystalReportViewer1.LogOnInfo;
foreach (TableLogOnInfo tableLogOnInfo in tableLogOnInfos)
tableLogOnInfo.ConnectionInfo = connectionInfo;
private void SetCurrentValuesForParameterField(ReportDocument reportDocument, ArrayList arrayList)
ParameterValues currentParameterValues = new ParameterValues();
foreach (object submittedValue in arrayList)
ParameterDiscreteValue parameterDiscreteValue = new ParameterDiscreteValue();
parameterDiscreteValue.Value = submittedValue.ToString();
currentParameterValues.Add(parameterDiscreteValue);
ParameterFieldDefinitions parameterFieldDefinitions = reportDocument.DataDefinition.ParameterFields;
ParameterFieldDefinition parameterFieldDefinition = parameterFieldDefinitions[PARAMETER_FIELD_NAME];
parameterFieldDefinition.ApplyCurrentValues(currentParameterValues);
protected void Page_Load(object sender, EventArgs e)
customersByCityReport = new ReportDocument();
string reportPath = Server.MapPath("customersByCity.rpt");
customersByCityReport.Load(reportPath);
ConfigureCrystalReports();
ArrayList arrayList = new ArrayList();
arrayList.Add("paris");
arrayList.Add("Madrid");
arrayList.Add("Marseille");
arrayList.Add("Buenos Aires");
arrayList.Add("Sao Paulo");
ParameterFields parameterFields = CrystalReportViewer1.ParameterFieldInfo;
SetCurrentValuesForParameterField(customersByCityReport, arrayList);
CrystalReportViewer1.ReportSource = customersByCityReport;
1st scenario
When in a runtime, it's keep appear a dialog box. This dialog box ask me to suppy Server, User ID, Password and Database. Once all information is supplied, my report display the data as expected
2nd scenario
I change my report using OLE DB (ADO) -> Microsoft OLE DB Provider for SQL Server -> checked on Integrated Security. I just choose Server, and Database. I assume me using Windows Authentication
When in a runtime, there's no dialog box as above. My report display the data as expected. really cool
Look's like, when report using SQL Server Authentication there's some problem. but, when report using Windows Authentication, it's fine.
I'm looking for comment. Please help meHello,
MS SQL Server 2008 requires you to install the MS Client Tools for 2008.
Once install then update all of your reports to use the SQL Native 10 as the OLE DB driver.
The try again, if it still fails search, lots of sample log on code in this forum.
Don -
How to backup the archived log after a crosscheck .
Hi all,
Here is the scenario:
My archive area got full, I moved some archived logs to another destination. My main script to backup archive log raised a error informing that some files were missing, so I issued a crosscheck archivelog all command.
I realized that I did something insane and is there any way to fix it? I mean, how could I backup the missed sequence? Because I'll need to send them to a tape and also register the files in the RMAN's catalog.
Regards and thanks in advance,
Emersonuser11983913 wrote:
Hi all,
Here is the scenario:
My archive area got full, I moved some archived logs to another destination. My main script to backup archive log raised a error informing that some files were missing, so I issued a crosscheck archivelog all command.
I realized that I did something insane and is there any way to fix it? I mean, how could I backup the missed sequence? Because I'll need to send them to a tape and also register the files in the RMAN's catalog.
Regards and thanks in advance,
EmersonHi Emerson
Use the following command to register moved archived redo logs to RMAN repository
CATALOG ARCHIVELOG ''; -
How to script the discovery of installed SAP instances (Windows)?
Hi,
I manage like two dozen of servers, some of which are pure sandboxes for Basis Persons. I sometime come over and discover a Java add-on to an existing ABAP instance, a new instance running...
I have followed the many threads about scripting shutdown & startup of known instances and it's quite easy to do. I initially made some scripts on each server to address the installed instances, but as they change, it pretty much forces me to go back and adjust.
There must be a simpler way!
So I want to discover all the running SAP instances (SID) on a given server, then the system numbers attached to any existing SID. Once I can query this on a server, I will be able to stop all SAP instances properly.
So how do you script the discovery of installed SAP instances (SID) and their respective components (instance 0, 1, ...)?
For the record, I use Windows shutdown scripts to systematically run a script that stops SAP instances, so my Windows Admin friends can reboot the servers without concern. I use a conditional Windows startup script to start all SAP instances when Windows starts, only if we want it to (i.e. planned maintenance is a good idea to want SAP to start automatically, all other reboot is definitly not a good idea).Install something like Belarc Advisor and parse the resulting HTML
-
How to disable the checkout button in saved carts window in istore
Hi all,
There is a requirement to disable the check out button in the saved carts window in istore.
When a user is saving a shopping cart in istore and revisiting back to the cart after some days. he should not be able to checkout but he has to click on update and go through the checkout.
If i could disable the checkout button then i could make all the users to click on the update button to proceed to checkout
Any ideas please............
Regards,
Prasad
Message was edited by:
Prasad rajanCross posted: [http://www.coderanch.com/t/487888/Swing-AWT-SWT-JFace/java/disable-cancel-button-input-dialog]
-
Hello,
My manager wants this information ASAP for licensing reporting.
This seems to run forever, even when I include a list of IPs.
I am using version 9.2 of MAP
Thank you very much,
Mikejschell wrote:
flyto9 wrote:
I'd been told to create a user friendly no brainer user interface In typical business scenarios involving databases that is ridiculous.
A company that has multiple database servers must ALREADY understand the complexities of managing and using those databases.
true, but you know as well as I do that requirements documents are usually not written by people with the least understanding on those complexities...
And if a company assigns such a project to someone like OP who clearly doesn't know how to deal with such requirements documents, that only shows their morosity all the more clearly :)
Assuming that I'm able to find a list of TCP connections on network, how do I know which of them are sqlserver?That isn't what I said. A "protocol" is a description of a methodology involving functionality and communication which solves a particular problem.
There is a "protocol" which describes how to find MS SQL Servers. You don't make it up yourself. You find the description, read what it says and implement it.Or more likely (like Oracle) there's no such security problem in MS SQL Server and instead it relies on the client knowing the connection details or it'll never find them. -
Is this the right way to implement a database using SQL Server Express?
Purchase a single central server (if you don’t have one already) and house it in the Wild Wood Apartments headquarters located in San Francisco, California
Purchase and install Windows Server 2012 Datacenter onto this single central server.
Along with the Windows Server 2012 Datacenter, you will have to purchase a license called Client Access License or commonly referred to as CAL
Install SQL Server Express onto this single central server as well
You will then need to install remote desktop access to each computer in the 20 building complexes Wild Wood Apartments owns. This allows each complex manager to access SQL Server Express on their computer and input information into the database.
Is there anything that I would have to add on or include, am I missing something, or is something incorrect?
Thank youThis allows each complex manager to access SQL Server Express on their computer and input information into the database.
Yes, but application software must be developed or purchased.
Your design would work for a small scale database and application. More likely you need a pay SS product such as Standard Edition.
Kalman Toth Database & OLAP Architect
SQL Server 2014 Database Design
New Book / Kindle: Beginner Database Design & SQL Programming Using Microsoft SQL Server 2014 -
How to disable the archive on re-do logs?
Gurus:
Please help with this. Thanks!> Edited by: Federico Biavati on Nov 16, 2009 11:53 AM
> Ops, sorry! wrong DB!!
:-D
Ok, where might somebody find such highly confidential information?
Yes!
The documentation: [Changing Log Settings|http://maxdb.sap.com/doc/7_7/0b/e1ab506fd040f7b62d31a62b70b0c9/content.htm]
Just use the DB Studio tool for it.
regards,
Lars -
Privilege mode disable the show logging command
any one pls advice how to disable the show logging command through the privilege
Pls see this link,
http://www.cisco.com/en/US/tech/tk59/technologies_tech_note09186a00800949d5.shtml
Regards,
~JG
Do rate helpful posts -
How to access the archive folder in jive forums programiticaaly
hi
how to access the archive folder in jive forums programitically using weblogic 10.3
Thanks
RaniAh, I'm sorry - I thought it was the private folder in C drive that I had managed to get into the previous week but it was the private folder in mass storage ...
If you want to thank someone, just click on the blue star at the bottom of their post -
Ours is a SQL Server Express Edition 2008-R2 - Windows Forms based application. We have a backup/restore utility provided with our software which performs some logical checks before restoring a backup to ensure that the backup is functionally valid.
However, our clients often use the SQL Server Enterprise Manager utility to 1) Restore backups or 2) Attach data files (kept aside before formatting) directly. This type of action bypasses all our functional checks and allows the user to restore an invalid
backup.
We want to detect that a database was restored/attached and may be we will stop the software from loading if such a thing happened. We think that this information (attach/restore) should be available within some table of SQL Server itself but don't know the
right location/query.
If any change is required in our software to achieve the above, we are ready to do the same too, e.g. may be we need to store some data at some point of time to make the detection happen, please advise.
So, how can we detect that
A database backup was restored using SQL Server Management Utility
(Note: MSDB.Restorehistory may not be a good option as we have often found this table blank for unknown reasons even after backup was restored and just in case user restores the MSDB from MSDB backup or MSDB template due to a data corruption, may be due to
abnormal shutdown of system, then the RestoreHistory table data is gone)
A database was created by attaching a data/log file using SQL Server Management Utility
Any help in this regard is highly appreciated.
Rajarshi
ProjectServer 2007 BeginnerHi,
For Enterprise edition, we can enable Auditing to audit BACKUP_RESTORE_GROUP in a server audit specification. However, SQL Server audit (fine-grained auditing) feature is not available for the SQL Server Express.
Features Supported by the Editions of SQL Server 2008 R2
http://msdn.microsoft.com/en-us/library/cc645993(v=sql.105).aspx
When a database is attached, SQL Server ERRORLOG will record “Starting up database 'DBNAME'.”
Using ALTER DATABASE OFFLINE and ONLINE will re-open the database files under the SQL Server, the SQL Server error log also contains the following informational message: “Setting database option ONLINE to ON for database 'DBNAME'.”
Additional information:
SQL Server Audit (Database Engine)
http://msdn.microsoft.com/en-us/library/cc280386.aspx
Tracy Cai
TechNet Community Support
Maybe you are looking for
-
Planning to buy refurb imac: 2.4 core 2 duo vs. 2.8 core 2 extreme
I'm planning to purchase a refurbished 24" imac. Is the difference in performance worth the extra $400 dollar cost for the 2.8 ghz CPU vs 2.4? Hard drive and ram isn't a big issue to me because that can be easily upgraded.But what about the CPU? Than
-
Hi, I followed the instructions from Apple MFI website, to apply for the Made For iPhone Program. After submission of the necessary documents and information, I have not heard back from Apple for couple weeks. How to track the application progress? C
-
Dark curtain descends over MacBook Pro screen
While I was watching a TV show. Message in several languages said I needed to hold down power button and restart my computer. When I did and the light grey screen appeared, It started emitting a series of thee loud beeps. A small light on the front e
-
This is an ongoing issue.
-
How to Create a New Software Component
Dear All, I am trying to prepare a list of steps to develop add-on products over SAP ECC 6.0. I was just wondering how to create a Software component for my namespace development, which I would like to assign my development package to. Any ideas or