11g: How to populate LOV from button click
Hi,
I want to populate a LOV when the user clicks a button (no af:inputlistofvalues is used)
How to do this?
regards
Peter
I was looking something like what you've asked and found a solution for my requirement, it might help ..
Basically I have a RichInputListOfValues on my page but it is set to invisible and I am using a commandlink to popup the LOV ..
See the code below..
RichInputListOfValues lovComp = getPostingTemplate();
FacesCtrlLOVBinding.ListOfValuesModelImpl lovModel = null;
lovModel =
(FacesCtrlLOVBinding.ListOfValuesModelImpl)lovComp.getModel();
lovModel.performQuery(lovModel.getQueryDescriptor());
LaunchPopupEvent e = new LaunchPopupEvent(lovComp);
e.queue();
Similar Messages
-
Simulate Copy-From Button Click on Delivery Document
Hi Friends,
How can I 'programmatically' click on Copy From button, and then select the Sales Order?
(I could get a forum post to capture the Copy From button click in the delivery document, but I want to do clicking also programmatically)
I could click on the Copy-From button programmatically.
After that, till I manually click on "Sales Order", control is not returned to the program (It acts similar to a message box:( )
Do you know any ways to acheive it?
Thanks.
Regards,
GeethaHello Rajkumar,
I came upon this thread but did not find it to be quite complete (and see that you were looking for a similar answer). I just wanted to let you know how I am using "Copy To" to copy a Sales Order into an A/R Invoice. I realize you are desiring a "Copy From" but I believe the steps will be the same (and believe others will value seeing this). I know there is discussion above that the copy to is a matrix but I found the simplest approach is to just treat it like a combobox. Here is my code in C#:
// Declare my variables
SAPbouiCOM.Form oForm = null;
SAPbouiCOM.Item oItem = null;
SAPbouiCOM.ComboBox oCombo = null;
// Set my form to the currently active form
oForm = SBO_Application.Forms.ActiveForm;
// Simulate a "Click" on the Copy To (for A/R Invoice)
oItem = oForm.Items.Item("10000329"); // This is the Item Number for Copy To
oCombo = (SAPbouiCOM.ComboBox)oItem.Specific;
oCombo.Select("A/R Invoice", SAPbouiCOM.BoSearchKey.psk_ByDescription); //If I want to copy to an A/R Down Payment, I simply change the "A/R Invoice" to "A/R Down Payment"
In short, by using the combo and "Selecting" the parameter I want, my belief is that SAP automatically initiates the remainder of the work. Hope this helps you (and others). -
How to populate data from table into datagrid in form
hi there. may i know how to populate data from a table into a datagrid? i have created a datagrid in a form using OLE's microsoft datagrid. i'm having problem to populate data from table into the grid. can i know how to do that? thanks
Not exactly. I want to enter input from form and the user can have all options to choose i.e. HIGH, MEDIUM or so on.
Suppose, you have option to select HIGH, MEDIUM or LOW and you can see all these options together. You select LOW and when you save, it is saves in the table as a value. So when you view the table again, it will show LOW as active and HIGH and MEDIUM are null. -
How modificate this script from mouse click to release
how modificate this script from mouse click to release
package
* A Colorful Fireworks Demonstration in Actionscript 3
* from shinedraw.com
import flash.events.MouseEvent;
import flash.system.ApplicationDomain;
import flash.events.Event;
import flash.display.MovieClip;
import com.shinedraw.effects.ColorfulFireworks;
public class Document extends MovieClip{
private var _colorfulFireworks : ColorfulFireworks;
public function Document(){
this.addEventListener(Event.ADDED_TO_STAGE, on_added_to_stage);
private function on_added_to_stage(e : Event):void{
// place the object to the stage
_colorfulFireworks = new ColorfulFireworks();
addChild(_colorfulFireworks);
// add the cover to save CPU time
var coverClass : Class = ApplicationDomain.currentDomain.getDefinition("Cover") as Class;
var cover : MovieClip = new coverClass();
addChild(cover);
cover.addEventListener(MouseEvent.CLICK, on_cover_click);
// remove the cover after click
private function on_cover_click(e:MouseEvent):void{
var cover:MovieClip = e.target as MovieClip;
removeChild(cover);
_colorfulFireworks.start();solved close pls
-
How do you fire a button click event on apex page from fancybox iframe that was created by page
I am trying to fire off the button click event from fancybox iframe. The apex page has a button that launches a fancybox iframe which is loaded with an APEX form. On close of that fancy box, I am trying to fire a click event on the parent page which will refresh a div with html that is created with plsql. The button on the page works as expected when clicked from the page. It will show a debug alert message to prove it was called and then load the div with the correct data. I am unable to fire off this button click from the fancybox iframe when it closes.
A couple of points:
I using Plug-in: Execute PL/SQL Code and Return Content ("PLUGIN_MULEDEV.SERVER_REGION_REFRESH") to place the create fancybox statement. It is used to populate a div using plsql.
The name of the button on the main page is P2020_REFRESH_SECTION_BUILDER_BTN.
The click dynamic action on the button is calling the plugin to replace the html in the div.
The data in the form in the fancybox is being saved to the database. On close of the fancybox box I want to refresh the div so the new record is included in the div html.
Can anyone help. Here is the fancybox code:
function customProcessOnReadyState4(){
for (var i=0;i<11;i++){
$( "#tabs"+i ).tabs();
$("#createNewExerciseLink"+i).fancybox({
''width'' : ''60%'',
''height'' : ''70%'',
''autoScale'' : true,
''transitionIn'' : 200,
''transitionOut'' : 200,
''type'' : ''iframe'',
''onClosed'' : function() {
window.parent.$(''#P2020_REFRESH_SECTION_BUILDER_BTN'').click();
Here are the dynamic actions assigned to the button:
5 - Execute JavaScript Code
alert("Starting refresh");
10 - Execute PL/SQL Code and Return Content [Plug-in]
begin
SCTUI.create_sct_tabs2(:P2020_CREATE_SECTION_LOV, '1');
end;user setActionListener...
<af:setActionListener from="#{bindings.XXX.inputValue" to="#{backingbean.variable}"
<af:inputText value="#{bindings.Email.inputValue}"
label="#{bindings.Email.hints.label}"
binding="#{backingBeanScope.backing_ShuttlePage.it2}"
id="it2">
<f:validator binding="#{bindings.Email.validator}"/>
</af:inputText>
<af:commandButton text="commandButton 2"
binding="#{backingBeanScope.backing_ShuttlePage.cb2}"
id="cb2" action="passing">
<af:setActionListener from="#{bindings.Email.inputValue}"
to="#{processScope.detail}"/>
</af:commandButton>next jsf page:
<af:outputText value="#{processScope.detail}"
binding="#{backingBeanScope.backing_ProcessScope.ot1}"
id="ot1"/>setPropertyListener also should work
<af:setPropertyListener from="#{bindings.Email.inputValue}" to="#{processScope.detail}" type="action"/> -
How to get iterator used on jsff from button clicked on jspx
Hi All,
I am using jdeveloper 11.1.1.5.
I have a bounded task flow and inside that I have a jsff and I have added one iterator in its bindings. Now I have dragged that jsff on my jspx page as a region.
I have a button on my jspx page I want to find the iterator of the jsff on button click.
How to find it.
Please help.
-- NavinKThanks Timo for your reply.
Does that mean We have to add the same iterator in the bindings of jspx as well ?
In my case I have added the iterator to my jspx page but I am getting the error described in InputText value is not getting updated in Iterator
Please help.
--NavinK -
Open a report from button click/javascript
Hi,
Does anyone know if there is a way to call a report from a button click? Or through javascript? I set the report to Display Results > Link - within the dashboard and then did a view source on it and found the function that calls the report from the hyperlink.
This is the code:
return DashboardReportLink('saw.dll?PortalGo&_scid=v-x8QJloqTY&PortalPath=/shared/Plan\x2520Setup\x2520Audit\x2520Tool\x2520/_portal/Plan\x2520Setup\x2520Audit&Page=Historical&NavFromViewID=d\x253adashboard\x257ep\x253acp4tq3p9brn77o6o\x257er\x253a8a2g9nltmkrtra9n&Path=/shared/Plan\x2520Setup\x2520Audit\x2520Tool\x2520/Archive\x2520Reporting/Run\x2520Historical\x2520Report&Action=PromptStart&Options=frdc', 'd:dashboard~p:cp4tq3p9brn77o6o~r:8a2g9nltmkrtra9n','Dashboard&PortalPath=/shared/Plan\x2520Setup\x2520Audit\x2520Tool\x2520/_portal/Plan\x2520Setup\x2520Audit&Page=Historical', false)
I added this function to the end of my javascript but when i click the button it just opens a blank page with
http://la820119:9704/analytics/saw.dll?PortalGo
as the url.
Any help would be appreciatedHi,
So i have been trying out a few things and the following url works to open the default view of the request:
window.location='saw.dll?Go&Path=/shared/Plan Setup Audit Tool /Archive Reporting/Run Historical Report&Options=dfr';
I just replaced 'Dashboard' in the code provided with the 'Go' and it started to work :)
What i need to do though is have this work for the session variables set up on the dashboard. I have 7 prompts which a user can use to filter a request. Each is assigned to a session variable that is used to call a stored procedure. Originally i thought that by setting the variables and then calling the report from the url that the session variable values i set would be used in the request. What seems to be happening is that the variables get set and then, on calling the url, they are reset to the defaults and the report is run.
Any help in solving this would be very much appreciated
Una -
How to populate data from dynamic drop down list to the text field
Hi,
I tried to populate data from dynamic drop down list to city field. I would like to concat data from drop down list.When selecting add button to add the item and select item from drop down list, data should be displayed in the text field. However, Please help. I spent alot of time to make it works I am not successful.
Please see the link below.
https://acrobat.com/#d=SCPS0eVi6yz13ENV0cnUdw
Thanks for your help
CindyHi Rosalin,
Loop the hidden table, get the values and populate drop down in each iteration.
DropDownList1.addItem("Text","Value");
You can use one more solution for this scenario. If it is a matter of 2,3 dropdowns, put three dropDowns in the form layout and give seperate static data binding to them. At run time make the dropDowns hide/visible as per the requirement.
Hope this helps.
Thanks & Regards,
Sanoosh -
How to populate LOV of one prompt based on other prompts w/o cascade
Hello All,
Scenario- There are three prompts in my report.
Source_Prompt1, Source_Prompt2 and Target_Prompt.
There is no direct reletion between Source_Prompt1 and Source_Prompt2.
And user wants Target_Prompt data on selection of these source_prompts.
Is there any way to populate target prompt on selection of source prompt.
Note- This can be implemented by applying cascading between all three prompts fields.
However user dosent want Cascading between source prompts.?
is there any other method except cascading prompt to populate LOV of one prompt based on selection of other prompt values?
Your insights are most welcome.
AmitI believe the only way to populate LOVs is directly from a database. E.g.; you can not populate it "manually". In your case, you may have to create your own prompt forms and use those.
- Ludek -
How To Replace LOVs With Buttons
Hi all,
can someone please advise if it is possible to replace LOVs with Buttons? Customer has a requirement to replace the LOVs with buttons in Compensation Manager to approve/reject the paysheet. This is for R12.1.3.
Many thanks
AmandaHi,
1) First create a new region of LOV type.
2) Then under flowlayout region, add lov action button. On its 'External LOV' property, give the path of lov region created in step1.
3) Right click on 'lov action button' to add 'lovActionMappings'.
--Sushant -
OBIEE 11g How to pass variable from one prompt to another prompt in dashboard page.
How to pass variable from one prompt to another prompt in dashboard page.
I have two prompt in dashboard page as below.
Reporttype
prompt: values(Accounting, Operational) Note: values stored as
presentation variable and they are not coming from table.
Date prompt values (Account_date, Operation_date)
Note:values are coming from dim_date table.
Now the task is When user select First
Prompt value “Accounting” Then in the
second prompt should display only Accounting_dates , if user select “operational”
and it should display only operation_dates in second prompt.
In order to solve this issue I made the
first prompt “Reporttype” values(Accounting, Operational) as presentation
values (custom specific values) and default presentation value is accounting.
In second prompt Date are coming from
dim_date table and I selected Sql results as shown below.
SELECT case when '@{Reporttype}'='Accounting'
then "Dates (Receipts)"."Acct Year"
else "Dates (Receipts)"."Ops
Year" End FROM "Receipts"
Issue: Presentation variable value is not
changing in sql when user select “operation” and second prompt always shows
acct year in second prompt.
For testing pupose I kept this presentation
variable in text object of dashboard and values are changing there, but not in
second prompt sql.
Please suggest the solution.You will want to use the MoveClipLoader class (using its loadClip() and addListener() methods) rather than loadMovie so that you can wait for the file to load before you try to access anything in it. You can create an empty movieclip to load the swf into, and in that way the loaded file can be targeted using the empty movieclip instance name.
-
How to generate barcode on button click event in PDF using adobe livecycle?
I already created form in PDF file which is validate completely .But , I required generate a barcode of all field of form using custom script on button click event.
Please give me right way for doing it .
Thanks in Advance,
Jaydeep Solanki.Hi vijay,
What project are you doing? Is it Asp.Net project? If so, you'll need to post it in the dedicated ASP.Net Forum
http://forums.asp.net for more efficient responses, where you can contact ASP.NET experts.
Have a nice day!
Kristin
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
How to run report on Button Click in Forms 9i
Hi ,
I want to run a report , when I press button on form
it is RDF file . I have complied it and create a REP File .
I has also set the report path in registry / HKEY_LOCAL_MACHINE/ SOFTWARE /ORACLE/ HOME1
And then i has written these command line on Button click
Declare
pl_id ParamList;
al_id Alert;
al_button Number;
M_RepFile Varchar2(80);
Begin
pl_id := Get_Parameter_List('tmpdata');
IF NOT Id_Null(pl_id) THEN
Destroy_Parameter_List( pl_id );
END IF;
pl_id := Create_Parameter_List('tmpdata');
Run_Product(REPORTS,'sitereport', SYNCHRONOUS,RUNTIME,FILESYSTEM,pl_id,NULL);
Show_Window('MAIN');
End;
Message('Now Closing');Message('Now Closing');
But only message at last is showing . No report being open .Look at this one
Re: Run Report10g Through form 10g -
How to prevent LOV from displaying duplicates
Hi all. I'm using JDev 10.1.3. I have a af:selectOneChoice component which is used to set search criteria. There are a few records with duplicate values. Is there a way for me to prevent the LOV from displaying duplicate values? thanks in advance.
<af:selectOneChoice
value="#{bindings.UserAckAnnualBalancesView1EdcDescription.inputValue}"
label="EDC Description"
valueChangeListener="#{backingExecuteBtn.alterEdcDescSearchVal}">
<f:selectItems value="#{bindings.UserAckAnnualBalancesView1EdcDescription.items}"/>
</af:selectOneChoice>John. I assume that you are suggesting that I do a SELECT DISTINCT. If so, then no I cannot change the underlying query. I want all the records, what I am actually looking for is a way to filter the items in the LOV.
-
HELP FOR OPEN IE FROM BUTTON CLICK ?
Hello All,
i make a jframe i want to open internet explorer window for particuler site by button
click any body tell me plz.
Thanks ...
Arif.See this Application below, use it in your application
//to open an application during the run time use runtime
//n no of applications can be opened during the run time
import java.awt.*;
import java.io.*;
public class RT
public static void main(String str[])
try
Runtime rt = Runtime.getRuntime();
rt.exec("notepad"); //exit or execute
// rt.exec("wordpad");
rt.exec("c:/progra~1/netscape/communicator/PROGRAM/NETSCAPE.EXE");
/* Process p = exec(perl xyz.pl);
DataInputStream dis = new DataInputStream(p.getInputStream());
System.out.println(dis.readLine()); */
catch ( Exception e)
e.printStackTrace();
Maybe you are looking for
-
Hi - I was wondering if anyone has any tips about working in cut time signature? Sometimes in theatre music the click gets too fast to work in 4/4 -- when you're up around quarter note=220 and faster it's kind of crazy. Is there a way to set up the m
-
task profile: 1. completed slideshow in iPhoto 2. clicked on share (send to iDVD) 3. opened iDVD 4. clicked on customize 5. clicked on Media (iDVD version is 5.0.4). the slideshow will not/does not show up in the list of media in the iDVD. also when
-
Connecting Ellipsis Jetpack to Canon Printer
Can anyone tell me how to get my canon pixma mg3200 printer, to connect to the ellipsis jetpack?
-
Trying to install and app on my iPhone 4s using App Store and when I click on a free app to install I get the "Your Apple ID has been disabled." error message.
-
Contact sheet with name of images
i saw a couple of references to this. one involved printing out of aperture to pdf, one involved image buddy and one appeared to involve exporting to html. is there a good way to get a set of contact sheets out with the names of the files so I can re