11g - Saving Customizations failing with XML error

I have two dashboards prompts on my dashboard. One is a simple dropdown list. The other is a Presentation Variable prompt (number). I've selected/entered two ordinary values, clicked Apply, and the dashboard has responded properly. Next, I've selected 'Save Current Customization'. After entering the name MYSTUFF as the saved customization and clicking OK, I'm getting this error:
The current xml is invalid with the following errors: Bad xml instance! <?xml version="1.0"?> <sawsel:dashboardSelections xmlns:sawsel="com.siebel.analytics.web/dashselections/v1" xmlns:sawst="com.siebel.analytics.web/state/v1" xmlns:sawx="com.siebel.analytics.web/expression/v1.1" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" version="0.7"><sawst:envState xmlVersion="200811100"><sawst:container cid="d:dashboard" xsi:type="sawst:topLevelStateContainer"><sawst:container cid="f:dpstate" xsi:type="sawst:dashpromptstate" statepoolId="phn95bo9nflsvfr362fcakclb2"><sawst:container cid="f:dpstate" xsi:type="sawst:dashpromptstate" statepoolId="qkautlal0g0v511mfq72b30lai"/></sawst:container><sawst:container cid="p:bp8ao515lc33ru6u" xsi:type="sawst:page" inDashboardPage="true"><sawst:container cid="r:2cnfc2145q1uiqcd" xsi:type="sawst:report" links="d" defaultView="compoundView!1" folder="/shared/Training" itemName="Sales and Profits"/><sawst:container cid="r:kbqpoefb9v4au3up" xsi:type="sawst:report" defaultView="compoundView!2" folder="/shared/Training" itemName="Sales Declines"/><sawst:container cid="r:hj81v17v5fvsaeto" xsi:type="sawst:report" defaultView="compoundView!2" folder="/shared/Training" itemName="Sales and Profits"/><sawst:container cid="s:5l6q89h71pmlb85t" xsi:type="sawst:section"><sawst:container cid="a:isdndle4j7uru0uv" xsi:type="sawst:actionlink"><sawst:container cid="n:condition" xsi:type="sawst:navigation" conditionEvalStatus="complete"/></sawst:container><sawst:container cid="n:condition" xsi:type="sawst:navigation" conditionEvalStatus="complete"/></sawst:container><sawst:container cid="s:3pt4biahbrdfsbke" xsi:type="sawst:section"/><sawst:container cid="s:j40b1k5eh77c4i4o" xsi:type="sawst:section"/><sawst:container cid="s:g2dns9sm7grqui3k" xsi:type="sawst:section"/><sawst:container cid="s:rrdjna562b7qqomk" xsi:type="sawst:section"/><sawst:container cid="s:ihgv7i7i0ch05gn2" xsi:type="sawst:section"/><sawst:container cid="s:4t8lq8sfpv26qok8" xsi:type="sawst:section"/><sawst:container cid="s:sv6uv7de99eaa9l4" xsi:type="sawst:section"/><sawst:container cid="s:839isfiqie8i751a" xsi:type="sawst:section"/></sawst:container></sawst:container></sawst:envState><sawsel:xmlStatesReferredTo><sawsel:ref refId="phn95bo9nflsvfr362fcakclb2"><sawsel:appliedStates><sawsel:filter><sawx:expr xsi:type="sawx:logical" op="and"><sawx:expr xsi:type="sawx:list" op="in" setVariable="dashboard.variables['Change_Pct']"><sawx:expr xsi:type="sawx:sqlExpression">1</sawx:expr><sawx:expr xmlns:xsd="http://www.w3.org/2001/XMLSchema" xsi:type="xsd:decimal">-10</sawx:expr></sawx:expr><sawx:expr xsi:type="sawx:list" op="in" setVariable="requestVariables['Selected_Month']"><sawx:expr xsi:type="sawx:sqlExpression">"Times"."Month"</sawx:expr><sawx:expr xmlns:xsd="http://www.w3.org/2001/XMLSchema" xsi:type="xsd:string">May-09</sawx:expr></sawx:expr></sawx:expr></sawsel:filter><sawsel:variables><sawx:expr xsi:type="sawx:list" op="in" setVariable="dashboard.variables['Change_Pct']"><sawx:expr xsi:type="sawx:sqlExpression">1</sawx:expr><sawx:expr xmlns:xsd="http://www.w3.org/2001/XMLSchema" xsi:type="xsd:decimal">-10</sawx:expr></sawx:expr></sawsel:variables></sawsel:appliedStates></sawsel:ref></sawsel:xmlStatesReferredTo></sawsel:dashboardSelections> Line:2, Col:1383, Attribute 'conditionEvalStatus' is not declared for element 'container' Line:2, Col:1496, Attribute 'conditionEvalStatus' is not declared for element 'container'
The error occurs in both Firefox 3.6.13 and IE 8.
Is this a known bug?

Looking at your log it is clear that, you are populating Xellerate Type=null. This is mandatory field and can't be null. However, when you create user using UI, the default value "End-Users" is being passed by default, because we have the corresponding field "Design Console" access check box at oim user profile.
Just map the constant value for trusted recon
Xellerate Type=End-Users
--nayan

Similar Messages

Oracle Database Express Edition 11g Release2 11.2.0 silent Installation failing with port8081 error

Hi everyone,
We are trying to create silent(unattended) install package to install Oracle database 11g express edition 11.2.0 silently on our machines. We modified the provided .iss file as per the requirement and tried to install with below command,
setup.exe /verbose /s /f1"c:\DISK1\response\oracleXE-install.iss" /f2"c:\DISK1\oracle_log.txt" /v" /l*v "c:\DISK1\oracle_msi_log.txt""
Installation is failing with below error from the log file,
1: OracleXE-Server-Install-Message: Port 8081 is in use. Specify a different port number.
Installshield 11:22:22: Installation aborts, ready to shut down.
Port 8081 is being used by mcAfee in our organization. We tried passing a different port number for Http in the response file(.iss), but it is failing with same reason. We have searched foruns and found that we need to stop the port8081 during the oracle XE installation and can start it later once the installation is completed. But As port 8081 is being used by McAfee in our organization, we could not stop it even during oracle XE installation as it creates security issues.
I am attaching the MSI log(failure log) and modified .iss(modfied .iss file to .iss.txt to be able to attach) files. Please look into it and suggest how can we achieve silent installation in this case.

Pl see previous discussions about this topic - seems to be a limitation of the silent install process
OracleXE-Server-Install-Message: The 8081 port is in use.

Console errors "Verification failed with 1 errors" and when Deleting Overrides

Hi Guys,
When trying to delete an override for a unix server I was prompted with this error:
Note: The following information was gathered when the operation was attempted. The information may appear cryptic but provides context for the error. The application will continue to run.
: Verification failed with 3 errors:
Error 1:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
Error 2:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=ef78d342-5a82-d629-224d-2e476003f6e1,LanguageID=ENA refers to an invalid sub element Filter.
Error 3:
Found error in 1|XXXXX.XX.Unix.Management.Pack|1.0.0.0|DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA|| with message:
Element Info with Identity DisplayString,ElementReference=06522f67-c195-2dfa-c310-a0134b961fc4,LanguageID=ENA refers to an invalid sub element Filter.
: Element Info with Identity DisplayString,ElementReference=a27e1d14-8ad4-56fb-da46-0c0994054e92,LanguageID=ENA refers to an invalid sub element Filter.
I then exported the MP and manually deleted the Override but when I try to import it I get the same error.
I have also checked a couple of other unsealed MP and some are also affected.
I have gone through the MP XML can find no matches for any of the references. Is there a way (powershell or SQL query) where i can identify what these references are or how I should proceed to troubleshoot this issue?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Hi Yan,
That was my understanding about the error also but there are no entries for:
ef78d342-5a82-d629-224d-2e476003f6e1
a27e1d14-8ad4-56fb-da46-0c0994054e92
06522f67-c195-2dfa-c310-a0134b961fc4
in the management pack at all.
What also is curious is that the errors refer to "LanguageID=ENA"
but the only language code present inside the management pack is ENU.
The fact that there is no ENA language pack and that there are no references matched leads me to believe
that this issue is not due to this MP its references in another.
</LanguagePack>
<LanguagePack ID="ENU" IsDefault="false">
<DisplayStrings>
There are also about 14 reference management packs this MP uses and those MP would also have a handful each which makes it difficult to troubleshoot.
Unfortunately deleting the MP isn't an option as there is a significant amount of configuration saved in it.
Any ideas on how I could identify theses references?
Cheers,
Martin
Blog:
http://sustaslog.wordpress.com
LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Windows Server 2012 Windows Backup failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).

The Volume Shadow Copy service initially was running under the context of System, so we thought that ‘System’ doesn’t have permissions to access network shares.
When the Volume Shadow Copy service was running under the context of System, this was the error logged:
“failed with following error code '0x8078014B' (There was a failure in creating a directory on the backup storage location.).”
Which is likely due to not having permissions to write to the network location.
This is a scheduled backup trying to write to a network location, so we changes the service to run under the context of an account that does have permissions to write to the network share.
  Then the error changed to this:
“failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).”
HRESULT 0x8078006b
DetailedHRESULT 0x8004230f
ErrorMessage %%2155348075
BackupState 12
VolumesInfo <VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0"
BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0"
TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228"
DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0"
FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0"
/></VolumeInfo>
We aren’t really seeing anything that gives any hint on what the issue is.
Any ideas? Thanks in advance!

We are trying to back up folders/files from 2 local drives (C: & D:), both of which have only 10% space used, and 100 GB free.
We are attempting to back the files up to a Remote Shared File (and there is 100+ GB free space out there).
  If we try another network location, we receive the exact same error.
This is Windows Server 2012, not running Hyper-V and is a physical server not a VM.
Thank you for the link.
Looking in:
Event Viewer / Application and Service Logs / Microsoft / Windows / Backup / Operational
But it doesn’t seem to give any more details:
Log Name:
Microsoft-Windows-Backup
Source:
Microsoft-Windows-Backup
Date:
7/8/2013 8:00:12 PM
Event ID:
5
Task Category: None
Level:
Error
Keywords:
User:
SYSTEM
Computer:
servername.edu
Description:
The backup operation that started at '‎2013‎-‎07‎-‎09T02:00:06.273000000Z' has failed with following error code '0x8078006B' (Windows Backup failed to create the shared protection point on the source volumes.).
Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
<EventID>5</EventID>
<Version>3</Version>
<Level>2</Level>
<Task>0</Task>
<Opcode>0</Opcode>
<Keywords>0x4000000000000000</Keywords>
<TimeCreated SystemTime="2013-07-09T02:00:12.872602100Z" />
<EventRecordID>30</EventRecordID>
<Correlation />
<Execution ProcessID="3028" ThreadID="3996" />
<Channel>Microsoft-Windows-Backup</Channel>
<Computer>servername.edu</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BackupTemplateID">{A421E864-A115-4288-8D12-F4878CF8A248}</Data>
<Data Name="HRESULT">0x8078006b</Data>
<Data Name="DetailedHRESULT">0x8004230f</Data>
<Data Name="ErrorMessage">%%2155348075</Data>
<Data Name="BackupState">12</Data>
<Data Name="BackupTime">2013-07-09T02:00:06.273000000Z</Data>
<Data Name="BackupTarget">\\servername\BACKUP</Data>
<Data Name="NumOfVolumes">2</Data>
<Data Name="VolumesInfo"><VolumeInfo><VolumeInfoItem Name="C:" OriginalAccessPath="C:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="1" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0"
IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0" NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="1604" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /><VolumeInfoItem
Name="D:" OriginalAccessPath="D:" State="15" HResult="-2139619228" DetailedHResult="0" PreviousState="0" IsCritical="0" IsIncremental="0" BlockLevel="0" HasFiles="1" HasSystemState="0" IsCompacted="0" IsPruned="0" IsRecreateVhd="0" FullBackupReason="0" DataTransferred="0"
NumUnreadableBytes="0" TotalSize="0" TotalNoOfFiles="0" Flags="68" BackupTypeDetermined="0" SSBTotalNoOfFiles="0" SSBTotalSizeOnDisk="0" /></VolumeInfo></Data>
<Data Name="SourceSnapStartTime">2013-07-09T02:00:06.289250300Z</Data>
<Data Name="SourceSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="PrepareBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PrepareBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupWriteEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="TargetSnapStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="TargetSnapEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="DVDFormatStartTime"><TimesList></TimesList></Data>
<Data Name="DVDFormatEndTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyStartTime"><TimesList></TimesList></Data>
<Data Name="MediaVerifyEndTime"><TimesList></TimesList></Data>
<Data Name="BackupPreviousState">2</Data>
<Data Name="ComponentStatus"><ComponentStatus></ComponentStatus></Data>
<Data Name="ComponentInfo"><ComponentInfo></ComponentInfo></Data>
<Data Name="SSBEnumerateStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBEnumerateEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBVhdCreationEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupStartTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SSBBackupEndTime">1601-01-01T00:00:00.000000000Z</Data>
<Data Name="SystemStateBackup"><SystemState IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="BMR"><BMR IsPresent="0" HResult="0" DetailedHResult="0" /></Data>
<Data Name="VssFullBackup">false</Data>
<Data Name="UserInputBMR">false</Data>
<Data Name="UserInputSSB">false</Data>
<Data Name="BackupSuccessLogPath">
</Data>
<Data Name="BackupFailureLogPath">
</Data>
<Data Name="EnumerateBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="EnumerateBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupStartTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="PruneBackupEndTime"><TimesList><Time Time="1601-01-01T00:00:00.000Z" /><Time Time="1601-01-01T00:00:00.000Z" /></TimesList></Data>
<Data Name="BackupFlags">0x9</Data>
<Data Name="ComponentInfoSummary"><ComponentInfoSummary ComponentInfoArrayPresent="1" TotalComponents="0" SucceededComponents="0" /></Data>
</EventData>
</Event>

IMP-00017: failed with ORACLE error 942 (SYS.DBMS_REPUTIL.SYNC_UP_REP)

Hi,
I am trying to exp a table from an oracle 9i db to an oracle 11g db.
exp USERID=user1/pass1@db9i TABLES=test FILE=test.dmp ROWS="y" statistics="none" GRANTS="n" INDEXES="n" TRIGGERS="n" CONSTRAINTS="n"
While trying to import i get an error
*"IMP-00017: following statement failed with ORACLE error 942:*
*"BEGIN SYS.DBMS_REPUTIL.SYNC_UP_REP('CYGENT_ADMIN','AGENT_ROOT_MAP'); END;"*
_when i do_
imp USERID=user2/pass2@db11g TABLES=test FILE=test.dmp FROMUSER=user1 TOUSER=user2 SHOW=Y
the last line i see is
*"BEGIN SYS.DBMS_REPUTIL.SYNC_UP_REP('CYGENT_ADMIN','AGENT_ROOT_MAP'); END;"*
_Question_
What do i need to do so that the last line (SYNC_UP_REP) is not included in the export dump.
Have tried searching for this but without much luck.
Appreciate the help.

Explain your usage of Advanced Replication capabilities. Where, what, and why.

How can i resend messages which failed with System Error

hi Can any one please help me with 3 messages stuck in adapter engine ,they are failing with system error,I tried to resend them but still they failing with the system errorXI_J2EE_ADAPTER_XI_HANDLER.so can any body help me with this problem .
thanks
p

Hi,
Check the threads..
[File (xml)>>xi>>IDoc;
[Problem in Webservice -> XI -JDBC;
[Problem in JDBC Reciver Channel;
Regards,
Prakasu

Iphone 6 plust update to 8.1 failed with unknown error (6)

Trying to update my iphone 6 plus to ios 8.1 using windows laptop running windows 7. It failed with giving message update failed with unknown error (6).
Exact error is:
     The iPhone "iPhone" could not be restored. An unknown error occured (6).
After this whenever I connect iphone to my laptop itunes shows serial number as n/a and it keeps on asking me to restore but always fails.
Any help in resolving the issue (either completing the update or restoring to factory defaults) is highly appreciates.
Thanks.
Checked the update logs and see the following at the end:
[11:07:48.0460] requested restore behavior: Erase
[11:07:48.0461] device did not return saved USB log
[11:07:48.0461] device did not return saved panic log
[11:07:48.0462] previous restore failed with exit status 0x100
[11:07:48.0463] connected to service com.apple.mobile.restored
[11:07:48.0464] using protocol version 13
[11:07:48.0464] unable to open device_map.txt: No such file or directory
[11:07:48.0465] board config = n56ap
[11:07:48.0466] no value returned for BootArgs
[11:07:48.0467] _copyDeviceProperty() failed for restore bootargs
[11:07:48.0468] no value returned for MarketingPartNumber
[11:07:48.0469] _copyDeviceProperty() failed for mpn
[11:07:48.0469] requested restore behavior: Erase
[11:07:48.0470] value query for 'HardwareModel' returned 'N56AP'
[11:07:48.0471] Established proxy for device ID 4
[11:07:48.0522] <Restore Device 06B9BF48>: operation 35 progress -1
[11:07:48.0525] requested restore behavior: Erase
[11:07:50.0998] <Restore Device 06B9BF48>: operation 28 progress -1
[11:07:59.0151] no override trust object found
[11:08:20.0357] device returned CFError with code 6
[11:08:20.0361] dumping CFError returned by restored:
[11:08:20.0364] CFError domainXXXXXXXXXXXXXXXXXXXin code:6 description:Fatal FDR Error returned from RestoredFDRCreate()
[11:08:20.0368] Sending acknowledgement that final status was received
[11:08:20.0759] Restore completed, status:6
[11:08:20.0759] Failure Description:
[11:08:20.0759] Depth:0 Error:AMRestorePerformRestoreModeRestoreWithError failed with error: 6
[11:08:20.0759]    Depth:1 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Failed to handle message type StatusMsg)
[11:08:20.0759]       Depth:2 Error:The operation couldn’t be completed. (AMRestoreErrorDomain error 6 - Fatal FDR Error returned from RestoredFDRCreate())

Hi sailesh.chopra,
Thanks for the question. After reviewing your post, it sounds like you are not able to update because of an error 6. I would recommend that you read this article, it may be able to help you isolate or resolve the issue.
Resolve iOS update and restore errors - Apple Support
Check your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006. Sometimes security software can prevent your device from communicating with either the Apple update server or with your device.
Check your security software and settings to make sure that they aren't preventing a connection to the Apple servers.
Thanks for using Apple Support Communities.
Have a nice day,
Mario

Exchange- IMAP command "APPEND" (to inbox) failed with server error

Not sure, but think I was adding a mailbox to the Exchange Server's inbox, and now I am hammered with repetitive alerts;
"Some actions taken while the account “Exchange” was offline could not be completed online.
Mail has undone actions on some messages so that you can redo the actions while online. Mail has saved other messages in mailbox “INBOX” in “On My Mac” so that you can complete the actions while online.
Additional information: The IMAP command “APPEND” (to INBOX) failed with server error: An unexpected network error occurred.."
Any ideas on how to stop the messages/undo/cancel, or anything to have Mail.App work again?
thanks.

This can happen anytime you give an IMAP command offline that the server is not able to fulfill once you go back online. Mail's less-than-helpful response is to keep retrying the command, without regard for the feedback from the server. And there's no way for you to revoke the command.
In my case, Mail kept recreating a draft email that I had deleted. I believe it had an attachment that was too large for the server to accept. So Mail kept creating copies of this draft, pushing my account over the usage limit. I closed Mail, accessed my account through a different app, deleted all those copies, and emptied the trash. When I returned to Mail, it went right back into its loop, creating more draft copies until my account was again over the limit.
This problem was discussed, but never resolved, as long ago as October 2007. Here's an archived thread: http://discussions.apple.com/thread.jspa?threadID=1198026
I tried this simple fix, which worked for others, but had to undo it in my case: http://snipr.com/pmlte
I'm now trying another approach. If it works, I'll describe it. Mail has been launching for 14 minutes now.

Rendering of Proxies in AE fails with generic error messages.

*sigh* working with AVC in CS4 on my quad core has been an exercise in pain.
I've followed the optimization guides linked to in the different forum posts and that lets me zip along until I actually start adding effects. Then I am right back to a crawl. I recently discovered proxies in AE and learned that I can use "replace" in premeire to leverage those same proxies... Sweet... When I works I am back to editing in both in real time!
The problem is AE is regularly failing to generate proxies for me and I cannot figure out why. All my video is shot the same 24mbps, 60fps, 1080p (true 60i). All shot from my Canon HF S10.
The error is always "Error reading frame from file" and it always occurs just before the render is about to complete. Sometimes I get lucky and a working .mov was generated in spite of the error. Bu most times the file isn't there.
So my 2.4ghz quad core with 8gb ram can't edit the originals and I can't create proxies... I'm effectively dead in the water.
I tried using Media Encoder to generate my proxies with no success either. It fails with "Unspecified Error".
Both times I am trying to encode to Quicktime, Jpeg, Draft Settings. For the heck of it I tried different codecs, etc. Nothing seems to help. Even worse is sometimes if I just queue the same file multiple times it eventually works.
Is there anything at all I can do to make successful proxy generation less like winning the lottery?

Yeah I updated to that right away. Premiere itself seems to behave most of the time. To be honest I've hardly had any problems with Premiere even before the 4.2 update.
But AVC (mts files) seem to be very problematic in AE in general. I also experience the issue mentioned here:
http://forums.adobe.com/message/2404464
Sounds like re-encoding to another format is the only way I'll be able to work in AE reliably. So I have to figure out a way to get Media Encoder to finish it's jobs.

Cube refresh fails with an error below

Hi,
We are experiencing this problem below during planning application database refresh. We have been refreshing the database everyday, but all of a sudden the below error is appearing in log. The error is something like below:
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
When the database refresh is done from workspace manually, the database refresh is happening successfully. But when triggered from unix script, its throwing the above error.
Is it related to some provisioning related issue for which user has been removed from MSAD?? Please help me out on this.
Thanks,
mani
Edited by: sdid on Jul 29, 2012 11:16 PM

I work with 'sdid' and here is a better explaination of what exactly is going on -
As part of our nightly schedule we have a unix shell script that executes refresh of essbase cubes from planning using the 'CubeRefresh.sh' shell script.
Here is how our shell looks like -
/opt/hyperion/Planning/bin/CubeRefresh.sh /A:<cube name> /U:<user id> /P:<password> /R /D /FS
Here is what 'CubeRefresh.sh' looks like -
PLN_JAR_PATH=/opt/hyperion/Planning/bin
export PLN_JAR_PATH
. "${PLN_JAR_PATH}/setHPenv.sh"
"${HS_JAVA_HOME}/bin/java" -classpath ${CLASSPATH} com.hyperion.planning.HspCubeRefreshCmd $1 $2 $3 $4 $5 $6 $7
And here is what 'setHPenv.sh' looks like -
HS_JAVA_HOME=/opt/hyperion/common/JRE/Sun/1.5.0
export HS_JAVA_HOME
HYPERION_HOME=/opt/hyperion
export HYPERION_HOME
PLN_JAR_PATH=/opt/hyperion/Planning/lib
export PLN_JAR_PATH
PLN_PROPERTIES_PATH=/opt/hyperion/deployments/Tomcat5/HyperionPlanning/webapps/HyperionPlanning/WEB-INF/classes
export PLN_PROPERTIES_PATH
CLASSPATH=${PLN_JAR_PATH}/HspJS.jar:${PLN_PROPERTIES_PATH}:${PLN_JAR_PATH}/hbrhppluginjar:${PLN_JAR_PATH}/jakarta-regexp-1.4.
jar:${PLN_JAR_PATH}/hyjdbc.jar:${PLN_JAR_PATH}/iText.jar:${PLN_JAR_PATH}/iTextAsian.jar:${PLN_JAR_PATH}/mail.jar:${PLN_JAR_PA
TH}/jdom.jar:${PLN_JAR_PATH}/dom.jar:${PLN_JAR_PATH}/sax.jar:${PLN_JAR_PATH}/xercesImpl.jar:${PLN_JAR_PATH}/jaxp-api.jar:${PL
N_JAR_PATH}/classes12.zip:${PLN_JAR_PATH}/db2java.zip:${PLN_JAR_PATH}/db2jcc.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/css-9_
3_1.jar:${HYPERION_HOME}/common/CSS/9.3.1/lib/ldapbp.jar:${PLN_JAR_PATH}/log4j.jar:${PLN_JAR_PATH}/log4j-1.2.8.jar:${PLN_JAR_
PATH}/hbrhppluginjar.jar:${PLN_JAR_PATH}/ess_japi.jar:${PLN_JAR_PATH}/ess_es_server.jar:${PLN_JAR_PATH}/commons-httpclient-3.
0.jar:${PLN_JAR_PATH}/commons-codec-1.3.jar:${PLN_JAR_PATH}/jakarta-slide-webdavlib.jar:${PLN_JAR_PATH}/ognl-2.6.7.jar:${HYPE
RION_HOME}/common/CLS/9.3.1/lib/cls-9_3_1.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/EccpressoAll.jar:${HYPERION_HOME}/common/
CLS/9.3.1/lib/flexlm.jar:${HYPERION_HOME}/common/CLS/9.3.1/lib/flexlmutil.jar:${HYPERION_HOME}/AdminServices/server/lib/easse
rverplugin.jar:${PLN_JAR_PATH}/interop-sdk.jar:${PLN_JAR_PATH}/HspCopyApp.jar:${PLN_JAR_PATH}/commons-logging.jar:${CLASSPATH
export CLASSPATH
case $OS in
HP-UX)
SHLIB_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${SHLIB_PATH:-}
export SHLIB_PATH
SunOS)
LD_LIBRARY_PATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LD_LIBRARY_PATH:-}
export LD_LIBRARY_PATH
AIX)
LIBPATH=${HYPERION_HOME}/common/EssbaseRTC/9.3.1/bin:${HYPERION_HOME}/Planning/lib:${LIBPATH:-}
export LIBPATH
echo "$OS is not supported"
esac
We have not made any changes to either the shell or 'CubeRefresh.sh' or 'setHPenv.sh'
From the past couple of days the shell that executes 'CubeRefresh.sh' has been failing with the error message below.
Cube refresh failed with error: java.rmi.UnmarshalException: error unmarshalling return; nested exception is:
java.io.EOFException
This error is causing our Essbase cubes to not get refreshed from Planning cubes through these batch jobs.
On the other hand the manual refesh from within Planning works.
We are on Hyperion® Planning – System 9 - Version : 9.3.1.1.10
Any help on this would be greatly appreciated.
Thanks
Andy
Edited by: Andy_D on Jul 30, 2012 9:04 AM

At DI R3trans fails with this error code ORA-12545, but CI runs

Hello Gurus,
We have our BW System on two instances with a separated oracle database server.
Last week the system was unreachable and we must restarted it hard.
After that, the Listener could started and runs. The DB could started, mounted and opened successfully.
Now we have a special problem.
The central instance can connect at startup to the database. But the dialog instance not.
The DI get the following error:
|> R3trans -x
This is R3trans version 6.14 (release 701 - 12.06.09 - 15:20:00).
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
R3trans finished (0012).
The trans.log entry are:
4 ETW000 [dbsloci.    ,00000] *** ERROR => CONNECT failed with sql error '12541'                        17 0.187511
4 ETW000 [dev trc     ,00000]     set_ocica() -> SQL error code 12541                                    13 0.187524
4 ETW000 [dev trc     ,00000] -->oci_get_errmsg (con_hdl=0, rc=12541)                                   14 0.187538
4 ETW000 [dev trc     ,00000]     OCIErrorGet -> SQL error code: 12541                                   14 0.187552
4 ETW000 [dev trc     ,00000]     ORA-12541: TNS:no listener
4 ETW000                                                                                22 0.187574
4 ETW000 [dblink      ,00433] ***LOG BY2=>sql error 12541 performing CON [dblink#4 @ 433]           14396 0.201970
4 ETW000 [dblink      ,00433] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#4 @ 433]                   39 0.202009
2EETW169 no connect possible: "DBMS = ORACLE                           --- dbs_ora_tnsname = 'BW2'"
A telnet connection test to port 1527 are also unsuccessful.
But sporadicly the telnet or R3trans connection are successful, but the second check are unsuccessful.
We have checked the telnet connection to another oracle database server (ERP) at port 1527 and it works.
The CI have some entry's in ST22 with DBIF_RSQL_SQL_ERROR --> ORA-03114: not connected to ORACLE.
Are someone known something about this issue?
regards
Chris

@ Sunny Pahuja:
We checked sapmnt.
Sapmnt is common on CI and DI. It was never mounted on DB. But DB runs perfectly until this issue.
@ Ankit Gupta
We checked the configuration of listener.
It is the same like the listener configuration of our ERP system with CI, DI and DB on separate Servers, too.
@ Rajesh Narkhede
From DB Server
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 07:40:56
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Used parameter files:
/oracle/BW2/102_64/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
OK (100 msec)
On CI and DI we don't have tnsping.
Just copy it don't work.
|> tnsping BW2
TNS Ping Utility for IBM/AIX RISC System/6000: Version 10.2.0.2.0 - Production on 06-MAY-2010 08:39:17
Copyright (c) 1997, 2005, Oracle. All rights reserved.
Message 3511 not found; No message file for product=network, facility=TNS
Message 3512 not found; No message file for product=network, facility=TNS
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (COMMUNITY = SAP.WORLD) (PROTOCOL = TCP)
(HOST = bw2dba) (PORT = 1527))) (CONNECT_DATA = (SID = BW2) (GLOBAL_NAME = BW2.WORLD)))
Message 3509 not found; No message file for product=network, facility=TNS
How to get it on the CI and DI. In the SAR files at SAP it is not included. I can't found something in the Web.

I ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

i ve updated my i pod touch to version 6.0.1. Installation got failed with some error msg, and now my i pod is not getting detedted in my system.Help me to fix it up.

What's the error mesage?

The installation of SAP Front-End components failed with 95 errors.

I tried to install SAP GUI 7.20 on Windows Vista X64. And I got this error message:
The installation of SAP Front-End components failed with 95 errors.
This 7.20 version used to run on this operating system fine. I reinstalled the OS, and now I got this.

Hi,
I suppose you reinstalled the same OS.
Did you install the JSDK (java) afterwards. As you must be aware Java is a pre-requisite for the SAP Frontend.
Also make sure you have set the environment variables after installing java.
Further documentation, the SAP installation manual can be found in the u201CDOCUu201D folder of the installation software.
Regards,
Rohan.

IDoc failed with the error massaeg "Instance of object type could not be ch

Hi All
I am getting IDoc failed with the error massaeg "Instance of object type could not be changed"
Message type :PORDCR
Basic type : PORDCR05
Message no. BAPI003
Status : 51
All POs are get uploaded in SAP during Cut over activities only.
Please suggest on this.It will be a great help.
Thanks
Ajit

Hi
After uploading POs into SAP we are changing quantity and value in PO in Legacy system, and for this all IDocs are failed, subsequently these changes are not triggering to ECC.
Please help
Thanks
Ajit

External Drive Disk Erase Failed with the Error Input/Output Error

I have 2 hard drives in an external FW800 enclosure that I am unable to format. When I go to initialize the drives in Disk Utility, I get the following error message: "Disk Erase failed with the error: Input/output error."
The drives show up in Disk Utility, but I can't repair them (that option is grayed out). Disk Utility correctly ID's the manufacturer of the drives (Maxtor), their size (200gb each), so it's obviously seeing that the drives are there. But it won't let me format them.
The drives are new, by the way; they don't have any data/files on them. I have Disk Warrior, but the drives don't show up there to be repaired -- probably because they aren't formatted yet.
After looking at other posts, I tried switching the jumper settings around on the drives -- from Master/Slave to cable select and back again, but it didn't help. I also tried doing a zero erase (even though the drives are new), zapping the PRAM -- again, no help.
One question I had is whether this could be a bad FW800 cable? The cable is new -- it came with the enclosure, which is an OWC Dual FW 800 enclosure. Other than that, does anyone have any other thoughts about what's causing this? Any help would be greatly appreciated.
Matthew

SOLUTION!!!!
I had the exact same problem. I have the original 20 GB hard drive that came in my Powerbook G4 550MHz and a couple of years ago I traded up for a 60 GB drive and bought a FW/USB enclosure for my original drive to use it to backup my important files. I hadn't backed up in over a year (shame on me!) and I decided maybe I should erase the drive and start from scratch. It was connected via USB.
At that point DiskUtility gave me the exact same Input/Output error. I tried partitioning the drive into 1 or more partitions but came up with the same error. I couldn't figure out what was wrong so I decided to startup in OS 9.2.2, I did that and let it start up, then plugged in the hard drive and it gave me the standard "This disk is unrecognizable, do you want to eject or erase?" so I clicked Initalize. It worked!
Just make sure you choose the MacOS Extended option when initializing out of OS 9 (instead of the MacOS Standard option) so it can be read and viewed in OS X.
If your computer is too new to be able to boot from an OS 9 folder on your drive or an OS 9 CD, then see if a friend or a local library has older computers that are running OS 9 or can boot from it. If not let me know and you can send me your drive and I'll reformat it.
Kind of crazy...I haven't used the OS 9 partition on my HD in YEARS...was even thinking about erasing it since I don't use any Classic applications anymore...good thing I didn't!
Nick
Powerbook G4 550Mhz Mac OS X (10.4.6)

11g - Saving Customizations failing with XML error

Similar Messages

Maybe you are looking for