11gR1 EM is not starting

I have installed 11gR1 in a new Windows environment but have some issues to get EM started. I have consulted already other similar threads but couln´t find a suitable solution.
If I issue the EM startup command it is hanging and I need to terminate it:
C:\Documents and Settings\a1>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://computer_1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsoleor
cl service is starting...............................Terminating on signal SIGIN
T(2)
Terminate batch job (Y/N)? y
Following Logfiles entries are created at that time:
emdctl.trc
2009-11-13 12:24:10 Thread-2308 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:10 Thread-2308 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:11 Thread-2308 ERROR ssl: Error initializing SSL
2009-11-13 12:24:11 Thread-2308 ERROR http: 1716: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:12 Thread-2416 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:12 Thread-2416 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:12 Thread-2416 ERROR ssl: Error initializing SSL
2009-11-13 12:24:12 Thread-2416 ERROR http: 1696: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:13 Thread-2456 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:13 Thread-2456 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:13 Thread-2456 ERROR ssl: Error initializing SSL
2009-11-13 12:24:13 Thread-2456 ERROR http: 1696: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:13 Thread-2456 ERROR main: nmectla_agentctl: Error connecting to https://computer_1:3938/emd/main. Returning status code 1
2009-11-13 12:24:18 Thread-2792 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:18 Thread-2792 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:18 Thread-2792 ERROR ssl: Error initializing SSL
2009-11-13 12:24:18 Thread-2792 ERROR http: 1716: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:25 Thread-3188 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:25 Thread-3188 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:25 Thread-3188 ERROR ssl: Error initializing SSL
emagent.trc
2009-11-13 12:23:42 Thread-1552 WARN http: snmehl_connect: connect failed to (computer_1:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2009-11-13 12:23:42 Thread-1552 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:23:42 Thread-1552 WARN command: Job Subsystem Timeout set at 600 seconds
2009-11-13 12:23:42 Thread-1552 WARN upload: Upload manager has no Failure script: disabled
2009-11-13 12:23:42 Thread-1552 WARN upload: Recovering left over xml files in upload directory
2009-11-13 12:23:43 Thread-1552 WARN upload: Recovered 229 left over xml files in upload directory
2009-11-13 12:23:43 Thread-1552 ERROR upload: Error merging files
2009-11-13 12:23:43 Thread-1552 ERROR upload: Error merging files
2009-11-13 12:23:43 Thread-1552 ERROR upload: Error merging recovered data files
2009-11-13 12:23:43 Thread-1552 WARN metadata: Metric VirtualHosts does not have any data columns
2009-11-13 12:23:43 Thread-1552 WARN metadata: Metric collectSnapshot does not have any data columns
2009-11-13 12:23:43 Thread-1552 WARN metadata: Name FileSystems has already been used
2009-11-13 12:23:43 Thread-1552 WARN emSDK.xml: <GetTable> can't be added to <ExecutionDescriptor>, it will be freed
2009-11-13 12:23:43 Thread-1552 WARN metadata: Name FileSystems has already been used
2009-11-13 12:23:43 Thread-1552 WARN emSDK.xml: <GetTable> can't be added to <ExecutionDescriptor>, it will be freed
2009-11-13 12:23:43 Thread-1552 WARN metadata: Metric hung_system_traces does not have any data columns
2009-11-13 12:23:43 Thread-1552 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2009-11-13 12:23:43 Thread-1552 INFO TargetManager: nmeetm_setDynPropReComputeParam: Values have been retrieved dynamicPropReComputeInterval = 120 dynamicPropReComputeMaxTries = 4
2009-11-13 12:23:43 Thread-1552 DEBUG TargetManager: call nmedt_waitDynPropertyFinish for computer_1:3938
2009-11-13 12:23:43 Thread-1512 DEBUG TargetManager: Computing dynamic properties for {computer_1:3938, oracle_emd}
....various DEBUG messages.........
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: nmedt_waitDynPropertyFinish for LISTENER_computer_1, ret=0
2009-11-13 12:24:01 Thread-1552 INFO TargetManager: save to targets.xml success
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: In getTypeAndNameForHostTarget
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: getTypeAndNameForHostTarget found host, computer_1
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: In getTypeAndNameForHostTarget
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: getTypeAndNameForHostTarget found host, computer_1
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: In getTypeAndNameForHostTarget
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: getTypeAndNameForHostTarget found host, computer_1
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: In getTypeAndNameForHostTarget
2009-11-13 12:24:01 Thread-1552 DEBUG TargetManager: getTypeAndNameForHostTarget found host, computer_1
2009-11-13 12:24:01 Thread-1552 INFO TargetManager: TargetManager initialized
2009-11-13 12:24:02 Thread-1552 DEBUG TargetManager: In getTypeAndNameForHostTarget
2009-11-13 12:24:02 Thread-1552 DEBUG TargetManager: getTypeAndNameForHostTarget found host, computer_1
2009-11-13 12:24:03 Thread-1552 INFO TargetManager: save to targets.xml success
2009-11-13 12:24:05 Thread-2096 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:05 Thread-2084 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds or earlier.
2009-11-13 12:24:05 Thread-2096 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:06 Thread-2096 ERROR ssl: Error initializing SSL
2009-11-13 12:24:06 Thread-176 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:06 Thread-2096 ERROR http: 1380: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:06 Thread-176 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:06 Thread-2096 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:24:06 Thread-176 ERROR ssl: Error initializing SSL
2009-11-13 12:24:06 Thread-2096 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:06 Thread-176 ERROR http: 1308: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:07 Thread-2096 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:07 Thread-176 ERROR command: nmejcn: failed http connection to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:24:07 Thread-2096 ERROR ssl: Error initializing SSL
2009-11-13 12:24:07 Thread-2096 ERROR http: 1380: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:07 Thread-2096 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:24:09 Thread-176 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:09 Thread-176 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:09 Thread-176 ERROR ssl: Error initializing SSL
2009-11-13 12:24:10 Thread-176 ERROR http: 1200: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:10 Thread-176 ERROR command: nmejcn: failed http connection to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:24:11 Thread-2068 ERROR recvlets.aq: for metric streams_pool.streams_pool_full on target oracle_database orcl.computer_1, EM metadata specifies no KeyColumn, but server reports OBJECT_TYPE 99
2009-11-13 12:24:13 Thread-2468 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:13 Thread-2468 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:13 Thread-2468 ERROR ssl: Error initializing SSL
2009-11-13 12:24:13 Thread-2468 ERROR http: 1200: Error initializing SSL connection for incoming request, aborting request. ret=-1
2009-11-13 12:24:14 Thread-176 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:14 Thread-176 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:14 Thread-176 ERROR ssl: Error initializing SSL
2009-11-13 12:24:14 Thread-176 ERROR http: 1220: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:14 Thread-176 ERROR command: nmejcn: failed http connection to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:24:19 Thread-2832 ERROR upload: Error in uploadXMLFiles. Trying again in 72.00 seconds or earlier.
2009-11-13 12:24:23 Thread-176 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:23 Thread-176 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:23 Thread-176 ERROR ssl: Error initializing SSL
2009-11-13 12:24:23 Thread-176 ERROR http: 928: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:23 Thread-176 ERROR command: nmejcn: failed http connection to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:24:23 Thread-3104 ERROR upload: Error in uploadXMLFiles. Trying again in 86.00 seconds or earlier.
2009-11-13 12:24:30 Thread-3604 ERROR upload: Error in uploadXMLFiles. Trying again in 103.00 seconds or earlier.
2009-11-13 12:24:37 Thread-1488 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:37 Thread-1488 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:37 Thread-1488 ERROR ssl: Error initializing SSL
2009-11-13 12:24:37 Thread-1488 ERROR http: 940: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:37 Thread-1488 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://computer_1:1158/em/upload/: retStatus=-1
2009-11-13 12:24:38 Thread-1488 ERROR ssl: Open wallet failed, ret = 28750
2009-11-13 12:24:38 Thread-1488 ERROR ssl: nmehlenv_openWallet failed
2009-11-13 12:24:38 Thread-1488 ERROR ssl: Error initializing SSL
2009-11-13 12:24:38 Thread-1488 ERROR http: 808: Unable to initialize ssl connection with server, aborting connection attempt
2009-11-13 12:24:38 Thread-1488 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://computer_1:1158/em/upload/: retStatus=-1
Any Ideas what could be the reason for those errors ?
Otherwise I would need to reinstall everything again......
Thanks

Well, finally I reinstalled everything again and Surprise, the error is still (nearly) the same!
Now I get a Error Message after starting EM:
C:\app\a1\product\11.1.0\db_1\BIN>emctl start dbconsole
Oracle Enterprise Manager 11g Database Control Release 11.1.0.6.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://COMPUTER1:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 11g Database Control ...The OracleDBConsoleor
cl service is starting...............
The OracleDBConsoleorcl service could not be started.
A service specific error occurred: 2.
More help is available by typing NET HELPMSG 3547.
Here are the log files, the error messages are a bit different (no more ssl but connection refused errors). In the meantime I disabled firewall and did some other modifications without luck:
emdctl.trc
2009-11-16 13:52:51 Thread-2932 WARN http: snmehl_connect: connect failed to (COMPUTER1:3938): No connection could be made because the target machine actively refused it.
(error = 10061)
2009-11-16 13:52:51 Thread-2932 ERROR main: nmectla_agentctl: Error connecting to http://COMPUTER1:3938/emd/main. Returning status code 1
2009-11-16 13:53:13 Thread-3080 WARN http: snmehl_connect: connect failed to (COMPUTER1:3938): No connection could be made because the target machine actively refused it.
(error = 10061)
2009-11-16 13:53:13 Thread-3080 ERROR main: nmectla_agentctl: Error connecting to https://COMPUTER1:3938/emd/main. Returning status code 1
2009-11-16 13:54:33 Thread-340 WARN http: snmehl_connect: connect failed to (COMPUTER1:3938): No connection could be made because the target machine actively refused it.
(error = 10061)
2009-11-16 13:54:33 Thread-340 ERROR main: nmectla_agentctl: Error connecting to https://COMPUTER1:3938/emd/main. Returning status code 1
2009-11-16 14:17:53 Thread-1284 WARN http: snmehl_connect: connect failed to (COMPUTER1:3938): No connection could be made because the target machine actively refused it.
(error = 10061)
2009-11-16 14:17:53 Thread-1284 ERROR main: nmectla_agentctl: Error connecting to https://COMPUTER1:3938/emd/main. Returning status code 1
2009-11-16 14:18:11 Thread-3200 WARN http: snmehl_connect: connect failed to (COMPUTER1:3938): No connection could be made because the target machine actively refused it.
(error = 10061)
2009-11-16 14:18:11 Thread-3200 ERROR main: nmectla_agentctl: Error connecting to https://COMPUTER1:3938/emd/main. Returning status code 1
OracleDBConsoleorclstvc
-------------- [OracleDBConsoleorcl] ------------
EMDROOT=C:\app\a1\product\11.1.0\db_1
ORACLE_HOME=C:\app\a1\product\11.1.0\db_1
EMSTATE=C:\app\a1\product\11.1.0\db_1\COMPUTER1_orcl
CONSOLE_CFG=dbconsole
TRACE_LEVEL=16
TIMEOUT=30
11/16/09 14:17:31 Job Process API is available
11/16/09 14:17:31 Start pending...
11/16/09 14:17:31 Verifying dbconsole is not started already. Command line "C:\app\a1\product\11.1.0\db_1\bin\emctl.bat" istatus dbconsole
11/16/09 14:17:31 Service Job object queried for basic limit information
11/16/09 14:17:31 Service Job object set with JOB_OBJECT_LIMIT_BREAKAWAY_OK limit
11/16/09 14:17:37 dbconsole launch commandline is "C:\app\a1\product\11.1.0\db_1\bin\emctl.bat" istart dbconsole
11/16/09 14:17:37 Tracking process launch...
11/16/09 14:18:07 dbconsole exited with retCode 0.
11/16/09 14:18:07 Check C:\app\a1\product\11.1.0\db_1\sysman\log\OracleDBConsoleorcl.nohup for details
emdb.nohup
----- Mon Nov 16 14:17:37 2009::omsRecvDir is set? = 1 -----
----- Mon Nov 16 14:17:38 2009::Console Launched with PID 988 at time Mon Nov 16 14:17:38 2009 -----
C:\app\a1\product\11.1.0\db_1\COMPUTER1_orcl\sysman\emd>C:\app\a1\product\11.1.0\db_1\jdk/bin/java -Djava.net.preferIPv4Stack=true -server -Xmx256M -XX:MaxPermSize=200m -XX:MinHeapFreeRatio=20 -XX:MaxHeapFreeRatio=40 -DORACLE_HOME=C:\app\a1\product\11.1.0\db_1 -Doracle.home=C:\app\a1\product\11.1.0\db_1/oc4j -Doracle.oc4j.localhome=C:\app\a1\product\11.1.0\db_1\COMPUTER1_orcl/sysman -DEMSTATE=C:\app\a1\product\11.1.0\db_1\COMPUTER1_orcl -Doracle.j2ee.dont.use.memory.archive=true -Djava.protocol.handler.pkgs=HTTPClient -Doracle.security.jazn.config=C:\app\a1\product\11.1.0\db_1/oc4j/j2ee/OC4J_DBConsole_COMPUTER1_orcl/config/jazn.xml -Djava.security.policy=C:\app\a1\product\11.1.0\db_1/oc4j/j2ee/OC4J_DBConsole_COMPUTER1_orcl/config/java2.policy -Djavax.net.ssl.KeyStore=C:\app\a1\product\11.1.0\db_1/sysman/config/OCMTrustedCerts.txt-Djava.security.properties=C:\app\a1\product\11.1.0\db_1/oc4j/j2ee/home/config/jazn.security.props -DEMDROOT=C:\app\a1\product\11.1.0\db_1\COMPUTER1_orcl -Dsysman.md5password=true -Drepapi.oracle.home=C:\app\a1\product\11.1.0\db_1 -Ddisable.checkForUpdate=true -Doracle.sysman.ccr.ocmSDK.websvc.keystore=C:\app\a1\product\11.1.0\db_1/jlib/emocmclnt.ks -Dice.pilots.html4.ignoreNonGenericFonts=true -Djava.awt.headless=true -jar C:\app\a1\product\11.1.0\db_1/oc4j/j2ee/home/oc4j.jar -config C:\app\a1\product\11.1.0\db_1/oc4j/j2ee/OC4J_DBConsole_COMPUTER1_orcl/config/server.xml
----- Mon Nov 16 14:17:41 2009::Agent Launched with PID 2812 at time Mon Nov 16 14:17:41 2009 -----
(pid=2812): starting emagent version 10.2.0.3.0
(pid=2812): emagent now exiting abnormally - initialization failure. Consult '.trc' and '.log' files.
----- Mon Nov 16 14:17:51 2009::Pid 2812 not found. reaped=2812, processStatus=14080 -----
----- Mon Nov 16 14:17:53 2009::Checking status of EMAgent : 2812 -----
----- Mon Nov 16 14:17:53 2009::EMAgent exited at Mon Nov 16 14:17:53 2009 with return value 55. -----
----- Mon Nov 16 14:17:53 2009::EMAgent has exited due to initialization failure. -----
----- Mon Nov 16 14:17:53 2009::Stopping other components. -----
----- Mon Nov 16 14:17:53 2009::EMWD Stopping DBConsole. -----
09/11/16 14:17:57 Error starting ORMI server computer1 port 5,520: Address already in use: JVM_Bind
09/11/16 14:17:57 Shutting down OC4J...
--- DBConsole internal stop. No OC4J admin passwd hence hard stop. ---
----- Mon Nov 16 14:17:58 2009::Commiting Process death. -----
----- Mon Nov 16 14:17:58 2009::Exiting watchdog loop
emagent.TRC
2009-11-16 13:53:09 Thread-3648 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: C:\app\a1\product\11.1.0\db_1\COMPUTER1_orcl\sysman\emd\agntstmp.txt. error = 0 (No error)
2009-11-16 13:53:10 Thread-3648 WARN http: snmehl_connect: connect failed to (COMPUTER1:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2009-11-16 13:53:10 Thread-3648 ERROR pingManager: nmepm_pingReposURL: Cannot connect to https://COMPUTER1:1158/em/upload/: retStatus=-1
2009-11-16 13:53:10 Thread-3648 WARN main: clear collection state due to OMS_version difference
2009-11-16 13:53:10 Thread-3648 WARN command: Job Subsystem Timeout set at 600 seconds
2009-11-16 13:53:10 Thread-3648 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-11-16 13:53:10 Thread-3648 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
2009-11-16 14:17:42 Thread-188 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: C:\app\a1\product\11.1.0\db_1\COMPUTER1_orcl\sysman\emd\agntstmp.txt. error = 0 (No error)
2009-11-16 14:17:48 Thread-188 WARN command: Job Subsystem Timeout set at 600 seconds
2009-11-16 14:17:48 Thread-188 ERROR fetchlets: Error when initializing C Logging Package for ECID generation.
2009-11-16 14:17:48 Thread-188 ERROR main: nmefmgr_initialize failed to initialize Fetchlet Manager
emagent.txt
2009-11-16 13:53:09 Thread-3648 Starting Agent 10.2.0.3.0 from C:\app\a1\product\11.1.0\db_1 (00701)
2009-11-16 13:53:10 Thread-3648 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
2009-11-16 14:17:42 Thread-188 Starting Agent 10.2.0.3.0 from C:\app\a1\product\11.1.0\db_1 (00701)
2009-11-16 14:17:48 Thread-188 <Agent Startup> : Initialization of FETCHLET MANAGER failure (00721)
Any hints are appreciated!

Similar Messages

  • Jdeveloper 11gR1 download does not start

    http://download.oracle.com/otn/java/jdeveloper/111/jdevstudio11111install.exe does not download neither using download manager nor using the direct download using Firefox
    I need it urgently, please tell me how to get that ..
    Thanks in Advance

    Works for me in Western Canada.
    Oracle uses several different download sites and redirects to them based on your IP address. Perhaps you could identify your country and area so Oracle folk can check and troubleshoot.

  • GoldenGate Manager Does not start  - Windows 7 64-bit, 11gR1 database

    Hi Experts,
    I ran into very tricky situation and seeking for clarification and if possible solution for the same, here how it goes: (This is a practice setup for my knowledge and not production)
    My environement:
    GGSCI (msheth-work) 18> versions
    Operating System:
    Version 6.1 (Build 7601: Service Pack 1)
    Database:
    Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
    PL/SQL Release 11.2.0.1.0 - Production
    CORE 11.2.0.1.0 Production
    TNS for 64-bit Windows: Version 11.2.0.1.0 - Production
    NLSRTL Version 11.2.0.1.0 - Production
    I have two database installed called gg1, gg2 on the same local system.
    I have two goldengate installation at following location: C:\gg1 , C:\gg2
    I was successfully able to start Manager, Extract and Replicate process with out creating windows services for manager.
    I read in discussion forum that it is recommneded to have different manager name and create services for them if you have multiple Goldengate installation in the same system. (Oracle Golden Gate installation
    Now when I create services using INSTALL ADDSERVICE ADDEVENTS, manager process does not start and manager report log and event viewer from windows shows following error despite of providing correct login details in manager parameter file:
    2012-08-23 10:42:31 ERROR OGG-00664 Oracle GoldenGate Manager for Oracle, mgr.prm: OCI Error beginning session (status = 1017-ORA-01017: invalid username/password; logon denied).
    GGSCI (hostname) 19> DBLOGIN USERID ggs_owner, PASSWORD ggs_owner
    Successfully logged into database.
    Manager Parameter File:
    PORT 7810
    USERID ggs_owner, PASSWORD ggs_owner
    PURGEOLDEXTRACTS C:\gg2\dirdat\ex, USECHECKPOINTS
    Your explaination and help will be highly appreciated.
    Regards,
    Mitul Sheth
    Edited by: 954634 on Aug 23, 2012 11:46 AM

    Thanks all of you to responding to my post, although I have bad news that I tried everything but it did not work. let me show you what all I have done:
    1) Adding windows services for manager
    GGSCI (msheth-work) 4> edit params ./globals
    MGRSERVNAME MGR1
    GGSCI (msheth-work) 5> exit
    c:\gg1>install addservice addevents
    Oracle GoldenGate messages installed successfully.
    Service 'MGR1' created.
    Install program terminated normally.
    When I try to start manager service either from GGSCI or from services.msc it gives same login error as mentioned earlier in the post.
    2) Using tnsnames while login into database:
    GGSCI (msheth-work) 1> edit params mgr
    PORT 7809
    USERID ggs_owner@gg1, PASSWORD ggs_owner
    PURGEOLDEXTRACTS C:\gg1\dirdat\ex, USECHECKPOINTS
    Just to make sure username and password is fine I login into database using GGSCI command prompt as follows:
    GGSCI (msheth-work) 4> dblogin userid ggs_owner@gg1, password ggs_owner
    Successfully logged into database.
    Hence, after making sure on all your suggestion I could not get it started and still situation is the same. I would need manager login into database becuase I have implemented DDL replication.
    Also, just by removing manager service from windows, same configuration without any change works like a charm. It just that for evey goldengate process a new window is create and it can't be closed. (If closed process dies).

  • CRS-0215: Could not start resource

    Hello
    This is my first time installing clusterware. However, i have not been too successful at it. This is my configuration:
    Operating System: RHES 5.3
    Oracle Database 11gR1
    OpenFiler used to configure shared disks
    After several attempts, i was able to run the root.sh script on both nodes.
    Output on first node:
    [root@vx0301 oracle]# /u01/app/oraInventory/orainstRoot.sh
    Changing permissions of /u01/app/oraInventory to 770.
    Changing groupname of /u01/app/oraInventory to oinstall.
    The execution of the script is complete
    [root@vx0301 oracle]# /u01/crs11g/root.sh
    Checking to see if Oracle CRS stack is already configured
    /etc/oracle does not exist. Creating it now.
    Setting the permissions on OCR backup directory
    Setting up Network socket directories
    Oracle Cluster Registry configuration upgraded successfully
    clscfg: EXISTING configuration version 4 detected.
    clscfg: version 4 is 11 Release 1.
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: vx0301 vx0301-priv vx0301
    node 2: vx0302 vx0302-priv vx0302
    clscfg: Arguments check out successfully.
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Oracle Cluster Registry for cluster has already been initialized
    Startup will be queued to init within 30 seconds.
    Adding daemons to inittab
    Expecting the CRS daemons to be up within 600 seconds.
    Cluster Synchronization Services is active on these nodes.
    vx0301
    Cluster Synchronization Services is inactive on these nodes.
    vx0302
    Local node checking complete. Run root.sh on remaining nodes to start CRS daemons.
    Output on second node:
    [root@vx0301 oracle]# /u01/app/oraInventory/orainstRoot.sh
    Changing permissions of /u01/app/oraInventory to 770.
    Changing groupname of /u01/app/oraInventory to oinstall.
    The execution of the script is complete
    [root@vx0301 oracle]# /u01/crs11g/root.sh
    Checking to see if Oracle CRS stack is already configured
    /etc/oracle does not exist. Creating it now.
    Setting the permissions on OCR backup directory
    Setting up Network socket directories
    Oracle Cluster Registry configuration upgraded successfully
    clscfg: EXISTING configuration version 4 detected.
    clscfg: version 4 is 11 Release 1.
    Successfully accumulated necessary OCR keys.
    Using ports: CSS=49895 CRS=49896 EVMC=49898 and EVMR=49897.
    node <nodenumber>: <nodename> <private interconnect name> <hostname>
    node 1: vx0301 vx0301-priv vx0301
    node 2: vx0302 vx0302-priv vx0302
    clscfg: Arguments check out successfully.
    NO KEYS WERE WRITTEN. Supply -force parameter to override.
    -force is destructive and will destroy any previous cluster
    configuration.
    Oracle Cluster Registry for cluster has already been initialized
    Startup will be queued to init within 30 seconds.
    Adding daemons to inittab
    Expecting the CRS daemons to be up within 600 seconds.
    Cluster Synchronization Services is active on these nodes.
    vx0301
    vx0302
    I also got the errors:
    Starting GSD application resource on (2) nodes1:CRS-0215: Could not start resource 'ora.vx0301.gsd'
    Starting ONS application resource on (2) nodes1:CRS-0215: Could not start resource 'ora.vx0301.ons'
    There were no log files.
    When i clicked ok on the execute scripts page, i got the following errors in the configuration assistants page:
    Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
    Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
    The ONS configuration failed to create
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Notification Server Configuration Assistant":
    Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
    The ONS configuration failed to create
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------Output generated from configuration assistant "Oracle Notification Server Configuration Assistant" (attempt 2):
    Command = /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
    The ONS configuration failed to create
    Configuration assistant "Oracle Notification Server Configuration Assistant" failed
    The "/u01/crs11g/cfgtoollogs/configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
    Contents of the /u01/crs11g/cfgtoollogs/configToolFailedCommands script:
    [oracle@vx0301 ~]$ cat /u01/crs11g/cfgtoollogs/configToolFailedCommands
    # Copyright (c) 1999, 2007, Oracle. All rights reserved.
    /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
    /u01/crs11g/bin/oifcfg setif -global eth0/172.30.4.0:public eth1/192.168.1.0:cluster_interconnect
    /u01/crs11g/bin/cluvfy stage -post crsinst -n vx0301,vx0302
    I tried running /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251 manually from the terminal:
    [root@vx0301 oracle]# /u01/crs11g/install/onsconfig add_config vx0301:6251 vx0302:6251
    The ONS configuration failed to create
    Output of the ons.log file:
    [root@vx0301 oracle]# cat /u01/crs11g/log/vx0301/racg/ons.log
    Oracle Database 11g CRS Release 11.1.0.6.0 - Production Copyright 1996, 2007 Oracle. All rights reserved.
    2010-01-25 13:59:15.786: [    RACG][3055679168] [10113][3055679168][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
    2010-01-25 13:59:33.359: [    RACG][3055584960] [10229][3055584960][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
    2010-01-25 14:01:00.319: [    RACG][3086849728] [10734][3086849728][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
    2010-01-25 14:02:02.723: [    RACG][3086628544] [11105][3086628544][default]: clsrons: procr_init:PROC-32: Cluster Ready Services on the local node is not running Messaging error [9] status = 32
    [root@vx0301 oracle]#
    I am absoutely stumped as to what to do next. Any help is greatly appreciated.

    I tried running ruclufvy.sh stage -post crsinst -n vx0301,vx0302 -verbose. Here is the output:
    [oracle@vx0301 clusterware]$ ./runcluvfy.sh stage -post crsinst -n vx0301,vx0302 -verbose
    Performing post-checks for cluster services setup
    Checking node reachability...
    Check: Node reachability from node "vx0301"
    Destination Node Reachable?
    vx0301 yes
    vx0302 yes
    Result: Node reachability check passed from node "vx0301".
    Checking user equivalence...
    Check: User equivalence for user "oracle"
    Node Name Comment
    vx0302 passed
    vx0301 passed
    Result: User equivalence check passed for user "oracle".
    Checking Cluster manager integrity...
    Checking CSS daemon...
    Node Name Status
    vx0302 running
    vx0301 running
    Result: Daemon status check passed for "CSS daemon".
    Cluster manager integrity check passed.
    Checking cluster integrity...
    Node Name
    vx0301
    vx0302
    Cluster integrity check passed
    Checking OCR integrity...
    Checking the absence of a non-clustered configuration...
    All nodes free of non-clustered, local-only configurations.
    Uniqueness check for OCR device passed.
    Checking the version of OCR...
    OCR of correct Version "2" exists.
    Checking data integrity of OCR...
    ERROR:
    OCR integrity is invalid.
    OCR integrity check failed.
    Checking CRS integrity...
    Checking daemon liveness...
    Check: Liveness for "CRS daemon"
    Node Name Running
    vx0302 yes
    vx0301 yes
    Result: Liveness check passed for "CRS daemon".
    Checking daemon liveness...
    Check: Liveness for "CSS daemon"
    Node Name Running
    vx0302 yes
    vx0301 yes
    Result: Liveness check passed for "CSS daemon".
    Checking daemon liveness...
    Check: Liveness for "EVM daemon"
    Node Name Running
    vx0302 yes
    vx0301 yes
    Result: Liveness check passed for "EVM daemon".
    Liveness of all the daemons
    Node Name CRS daemon CSS daemon EVM daemon
    vx0302 yes yes yes
    vx0301 yes yes yes
    Checking CRS health...
    Check: Health of CRS
    Node Name CRS OK?
    vx0302 yes
    vx0301 unknown
    Result: CRS health check failed.
    CRS integrity check failed.
    Checking node application existence...
    Checking existence of VIP node application
    Node Name Required Status Comment
    vx0302 yes exists passed
    vx0301 yes exists passed
    Result: Check passed.
    Checking existence of ONS node application
    Node Name Required Status Comment
    vx0302 no exists passed
    vx0301 no exists passed
    Result: Check passed.
    Checking existence of GSD node application
    Node Name Required Status Comment
    vx0302 no exists passed
    vx0301 no exists passed
    Result: Check passed.
    Post-check for cluster services setup was unsuccessful on all the nodes.
    [oracle@vx0301 clusterware]$
    I also tried running ./ocrchek on both nodes. Here is the output:
    [oracle@vx0301 bin]$ ./ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 2
    Total space (kbytes) : 3306636
    Used space (kbytes) : 2056
    Available space (kbytes) : 3304580
    ID : 1425438992
    Device/File Name : /dev/sdb1
    Device/File integrity check failed
    Device/File not configured
    Cluster registry integrity check failed
    [oracle@vx0301 bin]$ ssh vx0302
    Last login: Mon Jan 25 13:52:03 2010 from vx0301
    [oracle@vx0302 ~]$ cd /u01/crs11g/bin/
    [oracle@vx0302 bin]$ ./ocrcheck
    Status of Oracle Cluster Registry is as follows :
    Version : 2
    Total space (kbytes) : 3306636
    Used space (kbytes) : 2056
    Available space (kbytes) : 3304580
    ID : 1425438992
    Device/File Name : /dev/sdb1
    Device/File integrity check failed
    Device/File not configured
    Cluster registry integrity check failed
    [oracle@vx0302 bin]$
    From the results, the ids are the same, and so is the OCR disk. But the integrity check has failed. How do i interpret this output?

  • JSK not starting application server with heap memory changes

    Hi All,
    I'm trying to configure the JSK 11gR1 on 64 bit windows 7 professional personal machine with 8 GB of RAM.
    I have no trouble running JSK with default memory settings.
    However, when i modified CATALINA_OPTS in Catalina.bat to maximum 1024 , application server is not starting .
    Before
    CATALINA_OPTS=%CATALINA_OPTS% -Xms384m -Xmx768m
    After
    CATALINA_OPTS=%CATALINA_OPTS% -Xms384m -Xmx1024m
    This is the only change , however JSK is failing with error "Jump Start kit application server failed to start"
    Any help would be appreciated.
    Other options tried
    1. CATALAINA_OPTS with -d64 option
    2.Modified windows registry \System\CurrentControlSet\Control\Session Manager\SubSystems

    Hi Sarath,
    Is there a reason you would like to increase the memory size? JSK is intent not to be used for production but more for demo purposes.
    I would suggest to do a full installation.
    Cheers,
    Rodney

  • Oracle 11gr1 service unable to start in window 7 home basic

    Hi ,
    I have installed oracle 11gr1(64 bit) in window 7 home basic (64 bit).
    Database installed sucessfully completed and then when i tried to connect through SQL*PLUS i got erro like
    ERROR:
    ORA-12154: TNS:could not resolve the connect identifier specified.
    Then i checked whether oracle service is started or not. when service is showing status_type is automatic and not started.
    After installation i have restarted my laptop. i tried to start oracle srvice its throughing error is
    Window could not start the oracleserviceorcl service in local system.
    Error 1067: The process terminated unexpectedly.
    Can you please help me how to start service with out any error.
    Thanks

    11gR1 is not certified on any Windows 7 version.
    http://docs.oracle.com/cd/B28359_01/install.111/b32006/reqs.htm#CHDHGGFE
    Also, Home/Basic versions of Windows are not certified for any Oracle software installs.
    One option you have is to install VM software on your Win 7 machine, create a Linux VM, install Linux in the VM, then install 11gR2 in the Linux VM, Pl see my blog (linked in my profile) for detailed steps on how to do so.
    HTH
    Srini

  • Enterprise Manager will not start

    Oracle EE 11gR1
    Linux 5.4
    After IP address changes to database servers, Enterprise Manager (emctl) will not start and, hence, I can not manage my database via Enterprise Manager.
    What needs to be changed to get emctl to recognize new IP address of database server?
    Thanks.

    user601798 wrote:
    Very helpful.
    But when asking for the Listener port number (during the emca create) where do I specify (if at all) the port I want the emctl agent to listen on? In the past I have used a port other than 1521 for the emctl agent, e.g. 1158 and 5502.
    http://docs.oracle.com/cd/B28359_01/server.111/b28319/emca.htm#BABJHAHA
    BTW - does this process (emca .... drop) bring down the database or does it require that the database be in another state besides 'open'. I ask this because I see from the logs that the process is 'queiscing' the database so I was wondering if all user sessions had to be terminated. Otherwise, this process will just 'sit there' as if doing a 'shutdown normal'. It is taking a while....
    Dec 13, 2012 5:19:28 AM oracle.sysman.emcp.EMConfig perform
    INFO: This operation is being logged at /u01/app/oracle/cfgtoollogs/emca/db1/emca_2012_12_13_05_19_08.log.
    Dec 13, 2012 5:19:29 AM oracle.sysman.emcp.util.DBControlUtil stopOMS
    INFO: Stopping Database Control (this may take a while) ...
    Dec 13, 2012 5:19:35 AM oracle.sysman.emcp.EMReposConfig invoke
    INFO: Dropping the EM repository (this may take a while) ... <---?
    Database can remain up and running, but will be placed into quiesced mode -
    http://docs.oracle.com/cd/B28359_01/server.111/b28318/consist.htm#CNCPT1329
    This may take a while if the database is active
    ThanksHTH
    Srini

  • I am not able to launch FF everytime i tr to open it, it says FF has to submit a crash report, i even tried doing that and the report was submitted too, but stiil FF did not start, and the problem still persists, please help me solve this issue in English

    Question
    I am not able to launch FF everytime i try to open it, it says FF has to submit a crash report,and restore yr tabs. I even tried doing that and the report was submitted too, but still FF did not start, and the problem still persists, please help me solve this issue
    '''(in English)'''

    Hi Danny,
    Per my understanding that you can't get the expect result by using the expression "=Count(Fields!TICKET_STATUS.Value=4) " to count the the TICKET_STATUS which value is 4, the result will returns the count of all the TICKET_STATUS values(206)
    but not 180, right?
    I have tested on my local environment and can reproduce the issue, the issue caused by you are using the count() function in the incorrect way, please modify the expression as below and have a test:
    =COUNT(IIF(Fields!TICKET_STATUS.Value=4 ,1,Nothing))
    or
    =SUM(IIF(Fields!TICKET_STATUS=4,1,0))
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Error "can not start the configuration in parallel does not correct"

    Hello everybody,
    I have Windows 7 SP1, and when I install Business Objects 4.1 Client, it is install correctly but when i execute the program, for example BO Rich Client, an error appear "can not start the configuration in parallel does not correct" Could you help me?
    Thanks in advance!

    Check this KB
                  1678498  - BI 4.0 Universe Designer Gives Side-by-Side configuration incorrect Error

  • Can not start data Collection service

    I have installed Fabric Manager version 3.3.(4). In the Performance Web Client I can not start the service Data Collection is in starting forever.
    I also could not stop it. I rebooted the server and the status for this service is in starting.
    Thanks,

    Please provide more details like: Server OS, Java version, and what type of database you are using for the FM Server.  Have you considered using a newer version of FM Server?

  • I can not start secion in creative cloud from a macbook

    I can not start secion in creative cloud from a macbook, always comes CERRO secion, and never I log in I can not start secion indesign folio builder fails me in muse could not enter if you remove it to install again, now I can not download, I tried / Library / Application Support / Adobe / OOBE rename the folder to OOBE_old setup Guide, and simply does not work, if we are paying the membership of adobe creative cloud, at least ask for is a solution, timely responses because we are losing time and therefore money, if they are solving a problem is better than what we say and if more users seek solutions and only wait.
    En español.
    No puedo iniciar secion en creative cloud desde una macbook, siempre sale CERRO SECION, y nunca me conecto, en indesign no puedo iniciar secion de folio builder me da error, en muse tampoco podia entrar a si que lo elimine para poder instalar nuevamente, ahora no puedo descargar, he intentado / Library / Application Support / Adobe / OOBE cambiar el nombre de la configuración rápida carpeta para OOBE_old, y simplemente no funciona, si nosotros estamos pagando la membresia de adobe creative cloud, lo menos que pedimos es una solucion, respuestas oportunas porque estamos perdiendo tiempo y consecuencia dinero, si estan resolviendo algun problema es mejor que lo digan y a si nosotros los usuarios no buscamos mas soluciones y solamente esperaremos.
    we want a valid and positive response

    Hello, could you please try the steps posted here: http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
    Please let me know if you are successful or not.

  • Can not start Enterprise Manager web page

    I can not start Enterprise Manager web page.
    Here is my steps:
    1. Start enterprise manager
    emctl start
    Waiting for EM to initialize ...Started
    2. Check status:
    emctl status
    EMD is up and running : 200 OK
    3. Start the web page
    http://myhost:1810/
    4. get following error
    "There was no response. The server could be down or is not responding"
    System info:
    Database: 8.1.7.2
    OAS: 9.2.0.2
    JDK: 1.3.0_02
    Server OS: SunOS 5.8
    My question is where is the log file of enterprise manager and what the problem is.
    Thanks in advance
    Don

    diego,
    Thank you for your help. when I try your command I get following error:
    emctl start iasconsole
    Unknown command option
    Usage::
    emctl start|stop|status
    emctl reload | upload
    emctl set credentials [<Target_name>[:<Target_Type>]]
    emctl gencertrequest
    emctl installcert [-ca|-cert] <certificate base64 text file>
    emctl set ssl test|on|off|password [<old password> <new password>]
    emctl set password <new pwd>
    emctl authenticate <pwd>
    emctl switch home [-silent <new_home>]
    emctl config <options>
    emctl config options can be listed by typing "emctl config"

  • "can not start a job" issue in AWM

    Hi ALL,
    I am maintaining my cube from PLSQL with following options
    1. buildtype = "BACKGROUND"
    2. trackstatus = "true"
    3. maxjobqueues = 3
    i get following error when i see the "olapsys.xml_load_log" table
    ***Error Occured: Failed to Build(Refresh) DB_OWNER.MY_ANALYTICAL_WORKSPACE Analytic Workspace. Can not start a job.
    Can anybody explain when and why this error occurs? I have wasted a lot of time searching for this issue, but have found no person facing such issue.
    Hi Keith, it will be great if you can answer this one.
    My database version is 10.2.0.4.0 and AWM version is also 10.2.0.3.0
    Kind Regards,
    QQ
    Message was edited by:
    dwh_10g

    Applies to:
    Oracle OLAP - Version: 10.1 to 11.1
    This problem can occur on any platform.
    Symptoms
    - We have an AW maintenance / refresh script or procedure that contains BuildType="BACKGROUND", so that the AW maintenance task will be sent to the Oracle Job queue.
    - When we execute the AW maintenance / refresh script or procedure, we do not get any errors in the foreground, the script/procedure has been executed successfully.
    - However when we look into the build/refresh log (see <Note 351688.1> for details) we see that the maintenance/refresh task failed with:
    13:29:39 Failed to Submit a Job to Build(Refresh) Analytic Workspace <schema>.<AW Name>.
    13:29:39 ***Error Occured in BUILD_DRIVER
    - In the generated SQL trace for the session of the user who launches the AW build/refresh script or procedure, we see that ORA-27486 insufficient privileges error occurred at creation of the job.
    We see from the relevant bit of the SQL trace that err=27486 occured while executing the #20 statement which is 'begin DBMS_SCHEDULER.CREATE_JOB ...', and the statement is parsed and tried to be executed as user having uid=91:
    PARSING IN CURSOR #20 len=118 dep=2 uid=91 oct=47 lid=91 tim=1176987702199571
    hv=1976722458 ad='76dd8bcc'
    begin
    DBMS_SCHEDULER.CREATE_JOB(:1, 'plsql_block', :2, 0, null, null, null,
    'DEFAULT_JOB_CLASS', true, true, :3); end;
    END OF STMT
    PARSE
    #20:c=1000,e=1100,p=0,cr=0,cu=0,mis=1,r=0,dep=2,og=1,tim=1176987702199561
    EXEC #20:c=65990,e=125465,p=10,cr=1090,cu=3,mis=1,r=0,dep=2,og=1,tim=
    1176987702325167
    ERROR #20:err=27486 tim=465202984
    Cause
    User who tries to create a job (executes DBMS_SCHEDULER.CREATE_JOB() procedure) does not have the sufficient privileges.
    Solution
    1. Identify the user under which the job is supposed to be created. This user is not necessarily the same as the user who launched AW build/refresh script or procedure. Get the corresponding username from one of the %_USERS views e.g. from ALL_USERS.
    e.g.
    SELECT user_id,username FROM all_users WHERE user_id=91;
    2. Identify the system privileges currently assigned to the user by connecting as the user whom the privileges need to be determined, and execute:
    SELECT * FROM SESSION_PRIVS ORDER BY PRIVILEGE;
    3. Ensure that the CREATE JOB privilege is listed.
    The CREATE JOB privilege can be granted in various ways to a user:
    - via role OLAP_USER or via role OLAP_DBA (see view ROLE_SYS_PRIVS for what privs are assigned to a role):
    GRANT OLAP_USER TO <username>;
    - explicitly
    GRANT CREATE JOB TO <username>;

  • System PI 7.11 will not start because of R3INLPGM error

    Dear experts,
    our PI 7.11 sap system will not start on the backup machine. We have two AS/400 machines using IBM iCluster.
    On the source node the PI system starts without any problems. If we switch over to the target node,
    the PI system will not start. Only the two subsystems R3_<instance> were started and the SAPSTRSVR jobs
    ran under QUSRWRK.
    In the pool files from SAPSTART we found the following errors:
    QPRINT:
    R3<SID>400/R3INLPGM: Error occured setting gid to R3GROUP.
    QPJOBLOG:
    *NONE      Information                 XXXXXXX  SAPINLPGM    XXXXXXX *STMT    SAPINLPGM   XXXXXXX *STMT
                                         From module . . . . . . . . :   O4TMKLIBIX                                                                               
    From procedure  . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    To module . . . . . . . . . :   O4TMKLIBIX                                                                               
    To procedure  . . . . . . . :   prtjoblA                                                                               
    Statement . . . . . . . . . :   15                                                                               
    Message . . . . :   SAPINLPGM: Error in ChangeGidToR3GROUP - check whether              
                                         R3<SID>400/R3INLPGM is owned by QSECOFR using adopted authority         
    But the authority from all libs and objects are same as on the source machine.
    Any idea?
    Best regards,
    Matthias

    Hello Matthias,
    Please log on as QSECOFR (or a user with SECOFR authority),
    ADDLIBLE SAPXIP71
    and run command
    FIXSAPOWN SID(*NONE) DIR('/QSYS.LIB/R3XIP400.LIB/R3INLPGM.PGM')
    Best regards,
    B. Wolf

  • TA44551 My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work.

    My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?

    - After charging for 1/2 hour or so, does iTunes see the iPod?  If yes, restore the iPod from backup.
    - If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

Maybe you are looking for

  • Remotely connecting  operation timed out error

    i have three connections remotely done to a linux box RH 7.2 oracle 9.0.0.1 through telnet. When i try to connect the fourth connection,it says operation timed out. There is only one listener for all the clients. Do i need to add more listeners to th

  • Safari crash when I open facebook timeline

    I prefer to browsing fb desktop on safari instead of fb app, but safari just crash all the time after I zoom in&out several times on the timeline(myself) page. Anyone got the same problem? I hope ios will fix the bug in the future.

  • Virtualized firewall under Hyper-V?

    We are currently considering installing an instance of pfSense on our Hyper-V R2 based server to act as a content filter, captive portal and general firewall. Although it is usually bad practice to virtualise a firewall / gateway.. sometimes you gott

  • Mac OS X v10.7 Lion always boot into safe boot after upgrade?

    I have recently upgraded my OS from snow leopard to lion and the upgrade process was smooth and no problems encountered. I am also running boot camp with windows XP installed in the same iMac. After the upgrade, my iMac almost always boot into safe m

  • Updating sites /old version still in local cache of customers

    Hi, when updating sites for customers they and their customers often don't see the update as the site is loaded from their local cache. Is there a way to deal with this? It is impossible to change the name of the index-page, it is always index.html.