-13005 Error when connecting to 2003 Server

I've got a 2003 Server setup with Active Directory and I've enabled SFM (Services for Macintosh), and created a few mac shares.
I created a new account and left the "User must change password at next logon" option enabled, something I don't usually do.
I then went to my 10.4.7 client machine and tried to connect via AFP to the 2003 Server. It presented me with the following error:
Connection Failed:
-13005
I went back and reset the password for the user and did not enable the "user must change password at next logon" option and I was able to login with no issues at all.
I ran some tests using Mac OS X 10.4.0 thru 10.4.7.
From 10.4.0 thru to 10.4.5 I did not see the aforementioned issue, I was prompted by the OS that I needed to change my password, and I was then able to do so.
From 10.4.6 thru 10.4.7, I see the issue. So what's the difference?
The major difference I've found is that the User Authentication Method being used by default in 10.4.0 - 10.4.5 is "Clear Text", whereas with 10.4.6 - 10.4.7, the OS is deciding to use "Microsoft UAM 3.0".
If I change SFM from "Apple Clear Text and Microsoft" to "Apple Clear Text" then I don't see the problem under 10.4.6 and 10.4.7. This is logical as the only UAM the OS can use at this point is Clear Text.
I've also tried using Group Logic's ExtremeZ-IP product instead of SFM and I do not see the issue, this is because EZIP supports the DHX UAM, and the OS will use that instead of it's MS UAM (note that the UAM is Apple's pre-installed version, and NOT the version you can download and install from Microsoft).
I've also tried changing the password for a user account that did not have "require password change at next logon" set and it does not work if the UAM being used by the OS is "Microsoft UAM 3.0", in this siutation I see a "Password change failed -50" error dialog.
So it would appear the issue is with Apple's "Microsoft UAM 3.0".
Has anyone else encountered this issue, if so, did you find a workaround that did not involve using ExtremeZ-IP? or setting the authentication options in SFM to "Apple Clear Text"

Very possibly this is due to differences in AFP protocol versions.
Windows Server has not updated its AFP protocol since version 2.2. Mac OS X uses version 3.1 for Panther and 3.2 for Tiger. Possibly incremental changes are occuring between minor OS updates as well. Just a thought.
Hope this helps!
bill
1 GHz Powerbook G4   Mac OS X (10.4.7)  

Similar Messages

  • When the system status says icloud is OK but it reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    When the system status says icloud is OK but logon reports "encountered an error when connecting to the server", where do you report the problem, or how do you connect?

    Yes i am hoping staff here will look into things, even if i can not get the speeds back what i previously had for near 6 months it would be nice to know why i can not and why the download has dropped by around 10Mb and why my upload is now inconsistant.
    Ironically the post concerned got edited because i actually posted the full rather silly reply the Indian call centre made babbling on about down rates rather than the uprate i queried with them.
    Bit of a shambles really no real way on BTs web site to contact anyone with regards to broadband issues.
    The form which you kindly suggested and i appreciated your help ended up in the hands of someone who either did not bother to read the query or just had such a poor grasp of English they did not understand the query.
    Pretty pathetic really when BT are the largest telco in the UK. I think ill be taking my broadband business elsewhere regardless at the end of my 18 month contract, while im sure staff here are wonderful and may even yet help me, i do not particularly want to go through the almost like pulling teeth pain of getting any future issue looked at.
    They are great at quickly fixing voice line problems and have a great test on their site. Broadband side of things and support for that though seems a shambles.

  • Macs getting -13005 error when connecting to a 2003 server?

    I have a windows 2003 server that is my students file server. I am not an expert at windows by no means. I had a group policy that required users to change thier passwords every 180 days. I have removed this password because the server would not allow the users to change their passwords. I had to reset it for them.
    I am now getting an error of -13005 and does not let the user connect to the server unless I reset thier password. In Active Directory I can right click a user and select "reset password" and check the box that requires the user to reset the password at the next login. This works on a Mac running 10.3.x - 10.4.5
    How do I correct this problem?

    I have resolved this.

  • C# app throws error when connecting to indesign server

    It throws this exception:
    Invalid syntax (Exception from HRESULT: 0x800401E4 (MK_E_SYNTAX))
       at System.Runtime.InteropServices.Marshal.MkParseDisplayName(IBindCtx pbc, String szUserName, UInt32& pchEaten, IMoniker& ppmk)
       at System.Runtime.InteropServices.Marshal.BindToMoniker(String monikerName)
    Caused by this line:
    InDesignServer.Application app = (InDesignServer.Application)(System.Runtime.InteropServices.Marshal.BindToMoniker("config uration_noport"));
    The server is successfully running with the no configuration parameters therefore the configuration name by default should be "configuration_noport".
    Any idea why it's throwing this error? This is a C# 4.0 console application connecting to Indesign Server CS 5 (7.0).

    Can anyone from Adobe please offer some more insight on this matter? I have encountered the excact same issues and not been able to find any answers or clues.
    Test Steps involved:
    - start a named indesign server instance in a cmd using: indesignserver -configuration testServer (and seeing that it's using 'testServer' when starting up)
    - running a sample using BindtoMoniker() always works using VS and the built-in dev WebServer and connects to my named instance 'testServer' but never with IIS.
    - tried to grant as much as possible to IIS pool identity, DCOM settings etc...no luck
    - impersonating as Admin in code and making sure the current thread is authenticated, no luck
    - all I can is to fire up new COM instances with IIS using the new:... syntax but not get the named one

  • Unidentified error when connecting to Mysql server

    Hello,
    I have two computers. Both computer 1 is configured with dreamweaver cs5 and is successfully connected to the ftp server and its database.
    Computer 2 on the other hand with the same version of Dreamweaver and the same settings gives me an unidentified error when I try connecting to the database. I spoke to help chat for my server and confirmed all of the fields are entered in correctly and that I have allowed access to my server from any IP!
    I have tried re-installing !
    Localhost with Xampp works also!
    No success !

    Are you using any firewall/antivirus on computer 2?
    If so, try to disable and then try,
    Also make sure you have the Admin rights on Comp2.
    Thanks
    Harshit

  • User not found error when connecting to MDM server using NWDS

    Hi,
    I am getting the error as " User not found " when i am connecting to MDM server from the code written in NWDS.
    If i make that user as admin in usermapping in MDM den it works fine bt if that user is not admin den get the error as user not found.
    Please help.

    Hi,
    Thanks for the reply.
    I have added the user in user mapping in MDM server. but i have to give the authority as admin.
    other users who are added in usermapping bt not assigned as admin are getting the error.

  • I'm trying to use the public library to access my icloud email and I keep getting an error message stating icloud is encountered an error when connecting to the server.  Please help.

    I am trying to access my icloud email via a public library and I keep receiving an error message that icloud is experiencing a problem connecting to the server.  Please assist.

    How are you trying, using a web browser?

  • D4O-1014 error when connecting to Application Server-- OracleBI Discoverer

    Hi everyone,
    I try many approaches even remove all dimensions and cubes, still has the error msg when connecting to OracleBI Discoverer Version 10.1.2.2.
    Oracle Database is 9.2.0.7.0
    D4O-1014: An unknown exception had occurred while connecting to the database
    Do you have any hint or suggesion?
    Thanks.

    First : make sure you have a backup of your AW data model.
    I think you will find there are some additional CWM/CWM2 dimensions/cubes owned by SH in the metadata catalogs that do not actually exist. I cannot remember all the commands but if you look in the OLAP documentation for 9i one of the OLAP manuals refers to the CWM_ and CWM2_ views and the PL/SQL packages that can be used to remove the dimensions and cubes. I think all the offending objects will be owned by the user SH but check before you delete anything.
    Once you have removed the old objects run the following commands as the OLAPSYS user:
    exec CWM2_OLAP_METADATA_REFRESH.MR_REFESH;
    exec CWM2_OLAP_METADATA_REFRESH.MR_AC_REFESH;
    Also make sure you do not assign the OLAP_DBA role to your user, only assign OLAP_USER role.
    Hope this helps
    Keith Laker
    Oracle Data Warehouse Product Management
    OLAP Blog: http://oracleOLAP.blogspot.com/
    OLAP Wiki: http://wiki.oracle.com/page/Oracle+OLAP+Option
    DM Blog: http://oracledmt.blogspot.com/
    OWB Blog : http://blogs.oracle.com/warehousebuilder/
    OWB Wiki : http://wiki.oracle.com/page/Oracle+Warehouse+Builder
    DW on OTN : http://www.oracle.com/technology/products/bi/db/11g/index.html

  • C# error when connecting to ldap server that does not exist

    When using Novell.Directory.Ldap.dll and making a connect to an ldap
    server which does not exists i'm getting the following error:
    Connection.freeWriteSemaphore(-2): semaphore not owned by any thread
    Im using this to connect: conn.Connect(ldapHost, ldapPort);
    This error is not catched by LdapException. Can anyone tell me if this is
    a bug or do I have to do something different.

    Hi. I'm using version 2.1.11 of the NDK for CSharp. I'm getting this
    same error message:
    Code:
    Connection.freeWriteSemaphore(-2): semaphore not owned by any thread
    at Novell.Directory.Ldap.Connection.freeWriteSemaphor e(Int32 msgId)
    at Novell.Directory.Ldap.Connection.connect(String host, Int32 port, Int32 semaphoreId)
    at Novell.Directory.Ldap.LdapConnection.Connect(Strin g host, Int32 port)
    at TestLDAP.Program.Main(String[] args) in D:\Documents and Settings\tjbuege\my documents\visual studio 2010\Projects\TestLDAP\TestLDAP\Program.cs:line 20
    This occurs when I try to bind to a server that does not exist. Here
    is my sample source code that generates that error:
    Code:
    using System;
    using System.Collections.Generic;
    using System.Linq;
    using System.Text;
    using Novell.Directory.Ldap;
    namespace TestLDAP
    class Program
    static void Main(string[] args)
    LdapConnection conn = null;
    string host = "server.does.not.exist.com";
    int port = 389;
    try
    conn = new LdapConnection();
    conn.Connect(host, port);
    catch (Exception ex)
    Console.WriteLine(ex.Message);
    Console.WriteLine(ex.StackTrace);
    if (conn != null)
    conn.Disconnect();
    Is there a fix for this? It makes this library useless for me.
    Thanks,
    Tim
    tjbuege
    tjbuege's Profile: http://forums.novell.com/member.php?userid=108957
    View this thread: http://forums.novell.com/showthread.php?t=365082

  • Cisco Persistent Chat error when connecting to DB server

    When we want to configure it and check the connection it says, is in menu Messaging --> external setup --> external databases (in IM Presence Administrator). We use a postgresql server on linux and can connect to the db via other clients as test. What can be wrong? We did not enable ssl for this connection, you cannot even select ssl, is grayed out!
    Verify external database server connectivity (database connection check)
    The following Cisco Unified IM and Presence Service node to external database server connections failed:
    xxxxx.xxxx.xxx >> pchat (Persistent Chat)
    With message:
    One or more parameters are invalid. Please check them once again.
    If the 'Enable SSL' field is unchecked and the External Database chosen in the 'Database Name' field is SSL enabled, please check the 'Enable SSL' field and choose the certificate that corresponds to the chosen External Database and save your changes.
    If the 'Enable SSL' field is checked on the External Database Settings page then the following steps could help resolve the connectivity issue:
    Please try refreshing the page after 60 secs of saving the changes.
    Please verify if the Certificate chosen in the 'Certificate Name' field is valid and corresponds to the chosen External Database in the 'Database Name' field.
    If the problem persists, please restart the Cisco XCP Config Manager Service.

    Hi,
    As mentioned in the following configuration article, for earlier versions of SQL Server where MARS was not an option, the way to configure is to have server-side cursors configured.
    (check out the tabulated column next to MARS_Connection for details)
    http://www.easysoft.com/products/data_access/odbc-sql-server-driver/manual/configuration.html
    To use server-side queries in the connection URL, pls go through this link
    http://www.oracle.com/technology/products/jdev/howtos/bc4j/bc_psqlserverwalkthrough.html
    But please note that server-side cursors does have a performance overhead.
    Let me know if you need more information.
    HTH,
    Lakshmi.

  • Error when login windows 2003 server: Generic host process for win32 services has encountered a problem and needed to close

    Hello, Yesterday I've upgraded from Windows Server 2003 R2 Standard x86 to Enterprise. After upgrade I had to download and reinstall all updates about 130. The error from the topic title appears at logon. Another thing is Automatic Updates won't start
    and because of this other services that are set to Automatic just stop. Here is the list of services: Application Management, BITS, COM+ Event System, Cryptografic Services, Distribuited Link Tracking Client, Help and Support, Logical DIsk Manager, Performance
    Logs and Alerts, Server, Shell Hardware Detection, Workstation .... Error print screen: http://i.imgur.com/QPpMV6w.jpg appcompact.txt can be viewd here: http://textuploader.com/1bow Need to solve this issue asap, thank you in advance.

    Hi,
    Please try to update the hot fix then monitory the status again, at same time that error ome times also can cause by virus infection some time please back up important files
    update your AV soft then scan the virus.
    The relate hot fix:
    The Service Host process may stop unexpectedly in Windows Server 2003
    http://support.microsoft.com/kb/932762/en-us
    Hope this helps.
    We
    are trying to better understand customer views on social support experience, so your participation in this
    interview project would be greatly appreciated if you have time.
    Thanks for helping make community forums a great place.

  • An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider,
    error: 40 - Could not open a connection to SQL Server)

    An error has occurred while establishing a connection to the server.  When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named
    Pipes Provider, error: 40 - Could not open a connection to SQL Server)
    Hello,
    Make sure your SQL Server service is started.
    Make sure TCP\IP and names pipes protocol is enabled
    Make sure you have made an exception in firewall for SQL Server connection
    Make sure SQL Server browser service is enabled
    Make sure you connect with correct name hostname\instance name for named instance,MSSQLSERVER for default instance and Hotname\SQLEXPRESS for express edition.
    Please make sure you use port no when connecting to SQL server listeing on different port (hostname\instance ,portno)
    http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
    Hope this helps
    Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

  • URGENT - INTERNAL SERVER ERROR when connecting to site

    i'm getting INTERNAL SERVER ERROR when connecting to site. everything was ok till yesterday night but since today morning, nobody has been able to log in the site.
    i looked at the Apache Listener log files in IAS_HOME/Apache/Apache/logs
    the error_log file contained the following :-
    [Fri Jan 26 08:32:04 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 08:32:05 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/p
    age
    [Fri Jan 26 08:32:58 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 08:32:58 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/I
    sItWorking
    [Fri Jan 26 08:33:13 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 08:33:13 2001] [error] [client 10.32.12.219] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/page
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    then i tried to kill all the httpd processes and restart the apache and the error log was populated with the following :-
    [Fri Jan 26 09:35:48 2001] [warn] child process 16269 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16270 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16271 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16272 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16273 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16274 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16275 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16276 still did not exit, sending a SIGTERM
    [Fri Jan 26 09:35:49 2001] [warn] child process 16277 still did not exit, sending a SIGTERM
    ,same messages continue for different
    ,process ids followed by
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Attempt to free unreferenced scalar.
    Attempt to free unreferenced scalar.
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    Assertion failed: wwwctx->alloctotal == 0, file wwcepl.c, line 559
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:35:53 2001] [error] child process 16269 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:53 2001] [error] child process 16270 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:53 2001] [error] child process 16271 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:53 2001] [error] child process 16272 still did not exit, sending a SIGKILL
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16269 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16270 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16271 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16272 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16273 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [error] could not make child process 16274 exit, attempting to continue anyway
    [Fri Jan 26 09:35:54 2001] [notice] caught SIGTERM, shutting down
    [Fri Jan 26 09:38:10 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:38:44 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 09:38:44 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
    e
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:39:06 2001] [notice] caught SIGTERM, shutting down
    [Fri Jan 26 09:39:30 2001] [notice] Apache/1.3.12 (Unix) ApacheJServ/1.1 mod_perl/1.22 configured -- resuming normal operations
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    ApacheJServ/1.1: Exception creating the server socket: java.net.BindException: Address already in use
    [Fri Jan 26 09:42:17 2001] [error] [client 127.0.0.1] Invalid method in request ^A
    [Fri Jan 26 09:42:17 2001] [error] [client 10.32.1.81] malformed header from script. Bad header=<!DOCTYPE HTML PUBLIC "-//IETF: /servlet/pag
    e
    Any ideas or suggestions anyone ....??
    what could have possibly changed since yesterday to effect the site ??
    any help would be greatly appreciated ...
    null

    A couple of questions:
    1) Did you try shutting down apache with the sript?
    2) When killing the httpd processes did you also kill the associated java processes?
    null

  • ICloud always finds error when connecting to server

    When trying to open ICloud on my PC regarding my IPhone, a message comes up stating that an error occured when connecting to the server. I start fresh and I receive the same error. Any suggestions?

    This is strange as i am not able to login in to icloud with my [email protected] but i am able to login with [email protected] Which is the same to this account

  • What to do when you have internet connection but go to use an app, you get the Error message, 'An error occurred connecting to the server. Please make sure you have an internet connection' ?

    Yesterday, I downloaded the twoignite app. When I went to open the app to use, this error message appeared: An error occurred connecting to the server. Please make sure you have an internet connection. I checked my connection and found I had a solid connection. I have tried closing the app and reopening it; deleting the app and redownloading it (more than once); turning off my iphone and turning it back on. None of these things have worked. Thanks.

    Have you already seen this:
    http://forums.adobe.com/message/5099439#5099439
    Maybe you could also try asking in the kuler forum.

Maybe you are looking for