-17500 System Our of Memory Exception

Hello,
I am seeing strange behavior when I first start TestStand. I am getting an error -17500 'System Out Of Memory Exception was thrown' when executing the 'Create plug-in cache' step in the sequence 'Initialize Model Plugins' in the ModelSupport.seq. Here's the kicker: I only see this error when I try to run TestStand through a LabWindows/CVI GUI. I do not see this error when running TestStand from the Sequence Editor or a LabVIEW GUI I am using TS 2012 and CVI 2012. I am rnning the Parallel model. When I look at the Windows Task Manager Performance I do not see any memory issues. I have uninstalled and reinstalled TS and CVI to no avail. I am hoping someone else may have experienced this problem o rhave an idea of what the possible culprit is. I am running out of options.
I have attached a screen shot of the Run-Time Error window.
Thank you in advance for your help,
Jim
Solved!
Go to Solution.
Attachments:
TestStand Out of Memory.jpg ‏44 KB

See the following(Why do I Get an Out of Memory Exception (Error Code -17500; Operation Failed) when Using LabWindows/CVI Built TestStand User Interface with .NET 4.5?):
http://digital.ni.com/public.nsf/allkb/0136A53F98D69B7286257AD70069A735?OpenDocument
-Doug

Similar Messages

System.out of memory exception

I am running a TestStand sequence, using the .NET adaptor I am creating a class, and calling methods of a Class Library I created in VB.NET. I tested my class library in VB.NET and everything works in that environment. The sequence I call is pretty simple,
create an instance of my class, then
call a method that setups and initializes a camera
call a method that runs through the tests of a test sequence
The first pass of the sequence, it runs, the second pass of the sequence, whether in a For loop or the entire TestStand Sequence started again, it initializes the camera, but the second sequence, TestStand reports a system.out of memory exception in an underlying assembly/dll of my dll. But, when I call my dll from a .exe I made to test my dll, it works fine.
Thanks

Thanks for you reply.
I am calling the setup and initialization of the camera once; it is the calling the method that runs a sequence of tests that I am repeating calls to and subsequently failing on the second call. The interesting thing is if I close out of TestStand completely after the first run. Then run my TestStand sequence again, it reportsd the same error. It seems something is not being released, or cleared, or something. Keep in mind, I am only getting this with TestStand, I do not get it when I run a test .exe that calls my dll. I since have tested calling my .exe in TestStand that calls my DLL and that works. The problem is clearly in using TestStand to create the class and call the methods.
Thanks

How to overcome a "System out of memory exception"?

Hi,
As i am running my program , I get (sometimes) an out of memory exception.
I don't know exactly why because I am always doing the same thing so if I get this exception once It should always be so... (of course, as I am trying , no other program is running on my computer! ).
anyway.
I have 3 questions:
1) Do you know how to eliminate this error ?
(I don't mind if the time of execution is longer)
2) I have Win XP, do you think that using a software to build ".exe" files can change the problem ? If so, have you heard about a simple 'one' (I downloaded JET Excelsior, but it seems rather complicated to parametrize)
3) (last but not least) Can someone explain to me WHY there is this type of exception ( I would have thought that when "memory is full", then there is a swap, and the program doesn't stop !
I know there is a lot of questions in one ! ( altough I tried to be short)
Thanks

In answer to your third question, the error occurs when
the JVM runs out of memory, not the OS. Since the OS
controls swapping the fact that the memory space
assigned to the JVM is running low won't cause
swapping to take place. The solution is either a) use
less space by reducing what you have loaded at any
given time or b) increase the amount of memory
available to the JVM. You can user the -Xms, -Xmx and
-Xss switches to increase the amount of memory
available.
Mark

Large DataTable causes out of memory exception

Hello Support
We have a datatable that returns 112970 records and have 51 columns.
When we try generate an xls file or display data result in grid view than "System Out of memory exception" is thrown.
OS : Windows 2003 Enterprise 32 Bit
HP DL380 G4
CPU 2x3.6GHZ
6 GB RAM
Can you help us to find a resolution to this issue?
Thank you
Shrenik
Maurice

Thanks for reply.
1> .XLXS format allows us >= 133000 records in spread sheet some times and some times it throws Exception of type 'System.OutOfMemoryException'.
2> We are using asp.net gridview.
Exception:
ExceptionObject : Message : Exception of type 'System.OutOfMemoryException' was thrown.
Data : System.Collections.ListDictionaryInternal
InnerException : Nothing
TargetSite : System.String ToBase64String(Byte[], Int32, Int32, System.Base64FormattingOptions)
StackTrace : at System.Convert.ToBase64String(Byte[] inArray, Int32 offset, Int32 length, Base64FormattingOptions options)
at System.Web.UI.ObjectStateFormatter.Serialize(Object stateGraph, Purpose purpose)
at System.Web.UI.ObjectStateFormatter.System.Web.UI.IStateFormatter2.Serialize(Object state, Purpose purpose)
at System.Web.UI.Util.SerializeWithAssert(IStateFormatter2 formatter, Object stateGraph, Purpose purpose)
at System.Web.UI.HiddenFieldPageStatePersister.Save()
at System.Web.UI.Page.SavePageStateToPersistenceMedium(Object state)
at System.Web.UI.Page.SaveAllState()
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) HelpLink : Nothing Source : mscorlib HResult : -2147024882
Please see below code for more information.
protected void Button1_Click(object sender, EventArgs e)
try
DataTable _dt = GetDataFromDB();
ViewState["dtQueryResults"] = _dt;
BindgvQueryResults();
messageLabel.Text = "";
catch (Exception ex)
messageLabel.Text = "Query execute error: " + ex.Message;
private void BindgvQueryResults()
if (ViewState["dtQueryResults"] != null)
DataView _dv = ((DataTable)ViewState["dtQueryResults"]).DefaultView;
if (ViewState["gvQRSortExpression"] != null && ViewState["gvQRSortDirection"] != null)
_dv.Sort = ViewState["gvQRSortExpression"].ToString() + ViewState["gvQRSortDirection"].ToString();
gvQueryResults.DataSource = _dv;
gvQueryResults.DataBind();
private DataTable GetDataFromDB()
SqlCommand _Cmd = null;
SqlConnection _Con = null;
try
_Con = DBInteraction.InstantiateConnection();
_Cmd = new SqlCommand();
_Cmd.Connection = _Con;
_Cmd.CommandTimeout = 300;
if (_Con.State != ConnectionState.Open)
_Con.Open();
try
_Cmd.CommandText = CriteriaBuilder1.QueryTransformer.Sql;
catch(NullReferenceException)
throw new ApplicationException("Error message.");
if(string.IsNullOrEmpty(CriteriaBuilder1.QueryTransformer.Sql))
throw new ApplicationException("This query does not have any text. Please add views in the query and try again.");
_Cmd.CommandType = CommandType.Text;
DataTable _dt = new DataTable();
SqlDataAdapter adaPTer = new SqlDataAdapter(_Cmd);
adaPTer.AcceptChangesDuringFill = false;
adaPTer.Fill(_dt);
if (_dt.Rows.Count == 0)
throw new ApplicationException("Your request did not return any results.");
return _dt;
catch (Exception ex)
throw ex;
finally
if (_Con.State == ConnectionState.Open)
_Con.Close();
Maurice

Error Our of memory

Hi
In our test instance server our accounting encountered creating report on a specific date
please help how to resolve.
see below about the errors
thanks
Subledger Accounting: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XLAACCPB module: Create Accounting
Current system time is 26-NOV-2010 09:22:23
XDO Data Engine Version No: 5.6.3
Resp: 50597
Org ID : 81
Request ID: 489772
All Parameters: P_APPLICATION_ID=555:P_SOURCE_APPLICATION_ID=555:P_DUMMY=Y:P_LEDGER_ID=2024:P_PROCESS_CATEGORY_CODE=INVENTORY_TRANSACTIONS:P_END_DATE="2010/06/30 00:00:00":P_CREATE_ACCOUNTING_FLAG=Y:P_DUMMY_PARAM_1=Y:P_ACCOUNTING_MODE=D:P_DUMMY_PARAM_2=:P_ERRORS_ONLY_FLAG=N:P_REPORT_STYLE=D:P_TRANSFER_TO_GL_FLAG=:P_DUMMY_PARAM_3=:P_POST_IN_GL_FLAG=:P_GL_BATCH_NAME=:P_MIN_PRECISION=:P_INCLUDE_ZERO_AMOUNT_LINES=N:P_REQUEST_ID=:P_ENTITY_ID=:P_SOURCE_APPLICATION_NAME=Process Manufacturing Financials:P_APPLICATION_NAME=Process Manufacturing Financials:P_LEDGER_NAME=Tailin Abrasives Corporation:P_PROCESS_CATEGORY_NAME=Inventory Transactions:P_CREATE_ACCOUNTING=Yes:P_ACCOUNTING_MODE_NAME=Draft:P_ERRORS_ONLY=No:P_ACCOUNTING_REPORT_LEVEL=Detail:P_TRANSFER_TO_GL=:P_POST_IN_GL=:P_INCLUDE_ZERO_AMT_LINES=No:P_VALUATION_METHOD_CODE=:P_SECURITY_INT_1=:P_SECURITY_INT_2=:P_SECURITY_INT_3=:P_SECURITY_CHAR_1=:P_SECURITY_CHAR_2=:P_SECURITY_CHAR_3=:P_CONC_REQUEST_ID=:P_INCLUDE_USER_TRX_ID_FLAG=N:P_INCLUDE_USER_TRX_IDENTIFIERS=No:DebugFlag=N:P_USER_ID=1110
Data Template Code: XLAACCPB
Data Template Application Short Name: XLA
Debug Flag: N
{P_ACCOUNTING_REPORT_LEVEL=Detail, P_DUMMY=Y, P_ACCOUNTING_MODE_NAME=Draft, P_ERRORS_ONLY_FLAG=N, P_REPORT_STYLE=D, P_GL_BATCH_NAME=, P_END_DATE=2010/06/30 00:00:00, P_SECURITY_INT_3=, P_SECURITY_INT_2=, P_SECURITY_INT_1=, P_VALUATION_METHOD_CODE=, P_POST_IN_GL=, P_TRANSFER_TO_GL=, P_TRANSFER_TO_GL_FLAG=, P_INCLUDE_USER_TRX_IDENTIFIERS=No, P_USER_ID=1110, P_PROCESS_CATEGORY_NAME=Inventory Transactions, P_ERRORS_ONLY=No, P_DUMMY_PARAM_3=, P_SECURITY_CHAR_3=, P_DUMMY_PARAM_2=, P_SECURITY_CHAR_2=, P_DUMMY_PARAM_1=Y, P_SECURITY_CHAR_1=, P_ENTITY_ID=, P_PROCESS_CATEGORY_CODE=INVENTORY_TRANSACTIONS, P_INCLUDE_ZERO_AMT_LINES=No, P_LEDGER_ID=2024, P_POST_IN_GL_FLAG=, P_APPLICATION_ID=555, P_INCLUDE_USER_TRX_ID_FLAG=N, P_APPLICATION_NAME=Process Manufacturing Financials, P_REQUEST_ID=, P_CONC_REQUEST_ID=, P_LEDGER_NAME=Tailin Abrasives Corporation, P_SOURCE_APPLICATION_ID=555, P_CREATE_ACCOUNTING=Yes, P_CREATE_ACCOUNTING_FLAG=Y, P_MIN_PRECISION=, P_SOURCE_APPLICATION_NAME=Process Manufacturing Financials, P_INCLUDE_ZERO_AMOUNT_LINES=N, P_ACCOUNTING_MODE=D}
Calling XDO Data Engine...
Exception in thread "Cache Heap Tracker" java.lang.OutOfMemoryError: Java heap space
     at java.util.Hashtable.getEnumeration(Hashtable.java:544)
     at java.util.Hashtable.keys(Hashtable.java:229)
     at oracle.apps.jtf.base.resources.Architecture.cleanAll(Architecture.java:360)
     at oracle.apps.jtf.cache.CacheWorkerThread.heapTracker(CacheWorkerThread.java:333)
     at oracle.apps.jtf.cache.CacheWorkerThread.run(CacheWorkerThread.java:411)
****Warning!!! Due to high volume of data, got out of memory exception...***
****Please retry with scalable option or modify the Data template to run in scalable mode...***
********************************************************************************

Thanks for your reply
I performed this based on the reference solutions
Generic errors can be resolved by performing the following steps:
1. Log into the XML Publisher Administrator responsibility.
2. Navigate to Home - Administration - Configuration.
3. Under the General Properties select Temporary directory.
4. Select a temporary file location on your concurrent processing node. This should be at least 5Gb or 20 times larger than the largest XML data file you generate.
OR
1. Log into the XML Publisher Administrator responsibility.
2. Navigate to Home - Administration - Configuration.
3. Under the FO Processing Properties set:
a. Use XML Publisher's XSLT processor to True.
b. Enable scalable feature of XSLT processor to False.
c. Enable XSLT runtime optimization to True.
OR
1. Navigate to the System Administrator responsibility.
2. Navigate to Concurrent - Program - Define.
3. Query up the XDOTMGEN executable short name.
4. In the Options field add a value such as -Xmx512m or -Xmx1024m or other relevant number to increase the heap size.
5. Save the changes.
6. Resubmit the request.
but i still got an error
here is the output
Subledger Accounting: Version : 12.0.0
Copyright (c) 1979, 1999, Oracle Corporation. All rights reserved.
XLAACCPB module: Create Accounting
Current system time is 26-NOV-2010 15:21:57
XDO Data Engine Version No: 5.6.3
Resp: 50597
Org ID : 81
Request ID: 490068
All Parameters:
P_APPLICATION_ID=555:P_SOURCE_APPLICATION_ID=555:P_DUMMY=Y:P_LEDGER_ID=2024:P_PROCES
S_CATEGORY_CODE=INVENTORY_TRANSACTIONS:P_END_DATE="2010/06/30
00:00:00":P_CREATE_ACCOUNTING_FLAG=Y:P_DUMMY_PARAM_1=Y:P_ACCOUNTING_MODE=D:P_DU
MMY_PARAM_2=:P_ERRORS_ONLY_FLAG=N:P_REPORT_STYLE=D:P_TRANSFER_TO_GL_FLAG=:P_DUMMY_PA
RAM_3=:P_POST_IN_GL_FLAG=:P_GL_BATCH_NAME=:P_MIN_PRECISION=:P_INCLUDE_ZERO_AMOUNT_LI
NES=N:P_REQUEST_ID=:P_ENTITY_ID=:P_SOURCE_APPLICATION_NAME=Process
Manufacturing Financials:P_APPLICATION_NAME=Process Manufacturing
Financials:P_LEDGER_NAME=Tailin Abrasives
Corporation:P_PROCESS_CATEGORY_NAME=Inventory
Transactions:P_CREATE_ACCOUNTING=Yes:P_ACCOUNTING_MODE_NAME=Draft:P_ERRORS_ONLY=No:P
ACCOUNTINGREPORT_LEVEL=Detail:P_TRANSFER_TO_GL=:P_POST_IN_GL=:P_INCLUDE_ZERO_AMT_L
INES=No:P_VALUATION_METHOD_CODE=:P_SECURITY_INT_1=:P_SECURITY_INT_2=:P_SECURITY_INT_
3=:P_SECURITY_CHAR_1=:P_SECURITY_CHAR_2=:P_SECURITY_CHAR_3=:P_CONC_REQUEST_ID=:P_INC
LUDE_USER_TRX_ID_FLAG=N:P_INCLUDE_USER_TRX_IDENTIFIERS=No:DebugFlag=N:P_USER_ID=0
Data Template Code: XLAACCPB
Data Template Application Short Name: XLA
Debug Flag: N
{P_ACCOUNTING_REPORT_LEVEL=Detail, P_DUMMY=Y, P_ACCOUNTING_MODE_NAME=Draft,
P_ERRORS_ONLY_FLAG=N, P_REPORT_STYLE=D, P_GL_BATCH_NAME=,
P_END_DATE=2010/06/30 00:00:00, P_SECURITY_INT_3=, P_SECURITY_INT_2=,
P_SECURITY_INT_1=, P_VALUATION_METHOD_CODE=, P_POST_IN_GL=,
P_TRANSFER_TO_GL=, P_TRANSFER_TO_GL_FLAG=,
P_INCLUDE_USER_TRX_IDENTIFIERS=No, P_USER_ID=0,
P_PROCESS_CATEGORY_NAME=Inventory Transactions, P_ERRORS_ONLY=No,
P_DUMMY_PARAM_3=, P_SECURITY_CHAR_3=, P_DUMMY_PARAM_2=, P_SECURITY_CHAR_2=,
P_DUMMY_PARAM_1=Y, P_SECURITY_CHAR_1=, P_ENTITY_ID=,
P_PROCESS_CATEGORY_CODE=INVENTORY_TRANSACTIONS, P_INCLUDE_ZERO_AMT_LINES=No,
P_LEDGER_ID=2024, P_POST_IN_GL_FLAG=, P_APPLICATION_ID=555,
P_INCLUDE_USER_TRX_ID_FLAG=N, P_APPLICATION_NAME=Process Manufacturing
Financials, P_REQUEST_ID=, P_CONC_REQUEST_ID=, P_LEDGER_NAME=Tailin
Abrasives Corporation, P_SOURCE_APPLICATION_ID=555, P_CREATE_ACCOUNTING=Yes,
P_CREATE_ACCOUNTING_FLAG=Y, P_MIN_PRECISION=,
P_SOURCE_APPLICATION_NAME=Process Manufacturing Financials,
P_INCLUDE_ZERO_AMOUNT_LINES=N, P_ACCOUNTING_MODE=D}
Calling XDO Data Engine...
****Warning!!! Due to high volume of data, got out of memory exception...***
****Please retry with scalable option or modify the Data template to run in scalable mode...***
and this are not yet performed
1. As System Administrator: Navigate to Concurrent->Program->Define.
2. Query up the report: Account Analysis Report (for example).
3. Add a parameter named ScalableFlag:
Value Set: yes_no
Default Value: Yes
Select check boxes Enable Security and Required
Do not select the check box Display, or users could turn this off at runtime.
Token needs to be ScalableFlag (this is a case sensitive value).
Note: Complete these steps for both the application General Ledger and the Subledger Accounting concurrent program definitions.
OR
1. Determine what the heap size per OPP process is currently:
select DEVELOPER_PARAMETERS from FND_CP_SERVICES
where SERVICE_ID = (select MANAGER_TYPE from FND_CONCURRENT_QUEUES
where CONCURRENT_QUEUE_NAME = 'FNDCPOPP');
2. The default should be:
J:oracle.apps.fnd.cp.gsf.GSMServiceController:-mx512m
3. Increase the Heap Space per Process to 1024:
update FND_CP_SERVICES
set DEVELOPER_PARAMETERS =
'J:oracle.apps.fnd.cp.gsf.GSMServiceController:-mx1024m'
where SERVICE_ID = (select MANAGER_TYPE from FND_CONCURRENT_QUEUES
where CONCURRENT_QUEUE_NAME = 'FNDCPOPP');
4. Bring the managers down.
5. Run cmclean.sql script from Note 134007.1 - CMCLEAN.SQL Non-Destructive Script to Clean Concurrent Manager Tables.
6. Bring the managers up again.
can you help me how to add new paramteres scalableflag and also the other one
thanks

New system drive and memory setup - please help!

Please excuse these newbie questions. I DO understand that these issues have been discussed ad nauseam in this forum. But I have spent probably ten or twelve hours exploring the various threads, and partly owing to my ignorance, partly to the specifics of my situation, partly to the disagreements between various posters, and partly to my concern that some of the clearer statements on e.g. SSD’s may have been outdated by the progression of technology, I would greatly appreciate it if I could get some recommendations for my specific situation.
I am going to purchase an HP Z820 sometime in the near future. I do NOT want to build my own machine; I have just enough technical knowledge to be dangerous, as they say, and want one-stop shopping for technical support if my machine develops problems.
While I will use this machine for a variety of applications, my main concern is to optimize it for Premiere Pro. Based on Harm Millaard’s (who to my untutored eye seems to be one of the most prolific, knowledgeable, and helpful individuals in this forum) “Guidelines for Disc Usage” of two years ago, I plan to install a 300GB SSD for my boot drive, and to construct a RAID 5 array out of the remaining drives. (The Z820 does not support RAID 3.) The array drives will be either five (5) more 300GB SSD’s, or four (4) 600GB 15,000 RPM SAS HDD’s.
Assume for the sake of argument that cost is not a factor, and that the 1.2TB storage offered by the 5 SSD drives in RAID 5 (vs. the 1.8TB offered by the 4 SAS drives) is perfectly adequate, which would you choose? And why?
I should add that I am a video hobbyist, not a professional, so the outfit will receive a lot less pounding than a professional’s machine. Thus, I don’t THINK that the theoretically more limited life span of the SSD’s should be an issue, over, say, the next 3-4 years. (Correct me if that SHOULD be a concern.)
Re memory, I am planning on 32GB of unbuffered memory, the maximum the system will support. I COULD get 64MB, but it would have to be registered RAM, which I understand slows things down. The slight improvement in reliability with registered RAM is not really a concern from my hobbyist standpoint; and I think 32GB should be adequate. I use 1080/60p footage, which of course is demanding, but don’t use a lot of special effects, or other Adobe applications for input to Premiere (aside from Photoshop, occasionally). Anyone disagree with this choice?
Finally, is there a role for a RAMdisk in this outfit, for e.g. cache files? Would this increase the speed, or decrease the using up of write cycles on the SSD’s to a degree that would be significant for practical purposes? If so, how much RAM would you dedicate to the RAMdisk?
Again, sorry if you feel these questions have been adequately addressed in pervious threads, but try as I might I simply can’t manage to put it together on my own. And thanks in advance for any help.

Pardon me for jumping in. (I realize the question is to Harm.)
I am going to purchase an HP Z820 sometime in the near future.
Congrats, this is a great system.
... I plan to install a 300GB SSD for my boot drive, and to construct a RAID 5 array out of the remaining drives.
The 300GB SSD - is that an HP model? If so please reconsider: it's an older Intel SSD X25-M series that is slow, and runs at SATA 3G speeds (not 6G), which doesn't do the Z820 justice. Intel 520 series has been tested (by yours truly among others) and can be used in the Z820.
The array drives will be either five (5) more 300GB SSD’s, or four (4) 600GB 15,000 RPM SAS HDD’s.
As Harm will probably tell you: unless you also run a database server on that system, there is no advantage to 10K, 15Krpm or even SSD drives for video purposes, with the exception of possible reliability (enterprise class 10-15K drives and SSDs are tested much more extensively than desktop and nearline drives) and throughput in case of SSDs if, for instance, your workflow demands extreme bandwidth (e.g. recording of uncompressed 4K 12-bit RGB signal).
Assume for the sake of argument that cost is not a factor, and that the 1.2TB storage offered by the 5 SSD drives in RAID 5 (vs. the 1.8TB offered by the 4 SAS drives) is perfectly adequate, which would you choose? And why?
Hypothetically, I'd choose SSDs: higher reliability, responsiveness, performance, lower power consumption. I'd do research though to ensure they'd keep up with a lot of write I/Os thrown at them.
In reality, I'd choose neither, for reasons I mentioned above. 7200rpm nearline drives have sufficient performance for the purpose, and the capacity is much higher per dollar.
I COULD get 64MB, but it would have to be registered RAM, which I understand slows things down.
Not necessarily. The 2% difference between ECC and non-ECC memory (negligible as it is) is not at play here because Z820 does not support non-ECC memory. Registered or not, it has to be ECC, and registered memory is not necessarily slower than unbuffered. Even if it was, the 2% difference is unlikely to make any perceptable dent in performance given that no editing system runs its memory at 100% bandwidth at all times. Then again, if cost is not a factor, you could always swap unbuffered for registered later on.
Finally, is there a role for a RAMdisk in this outfit, for e.g. cache files? Would this increase the speed, or decrease the using up of write cycles on the SSD’s to a degree that would be significant for practical purposes? If so, how much RAM would you dedicate to the RAMdisk?
For timelines with limited number of effects, I wouldn't bother, with the premise that Premiere Pro has decent memory management on its own, and that memory will serve better if just given to Premiere Pro.
If on the other hand you do start using AE heavily, you might want to dedicate a (portion of your) SSD to "global performance cache" which is a fantastic time-saving feature of AE CS6.
HTH.

BPC 5.0.502 BPC Web Error Message: Exxception of Type System out of memory

In the process of updating a web page in the content library, page crashed received an error message of "Exception of type System out of memory. Exception was throw". What does this mean? We are now unable to open this sheet without receiving the prior message. Any remadies would be appreciated.

Hello,
    Did you receive this specific error message only managing that web page or for all pages?
    Did you try to stop all COM+ components on the application servers(on each if you are using more). It looks to be related to some memory problems.
    If the problem is related to a specific web page, the problem can be related to the content of that web page.
Best regards,
Mihaela

Large Bitmaps create out of memory exception

Hello,
I try to generate a "BufferedImage" from a Windows Bitmap file ( xxxx.BMP ) .
I can read and generate relatively images from relatively small files (e.g. 852x626 pixels works fine),
but if it comes to larger images, I get an out of memory exception.
Has anybody an idea how to convince Java to read also large BMP image files.
If I create an awt "Image" even large images (eg 1200x5000 pixels are generated).
But unfortunately I have found no way to convert an "Image" to a "BufferedImage" and
only "BufferedImage" offers all the processing methods needed.
This is the code snippet I wrote:
------------ start of code snippet -----------------------------------------------------
try {
DataBufferInt dbBMPInt = new DataBufferInt(nwidth*nheight);
System.out.println("DataBufferInt = "+dbBMPInt);
int [] bitMasks = new int[3];
bitMasks[0] = (int)0xff<<16;
bitMasks[1] = (int)0xff<<8;
bitMasks[2] = (int)0xff;
SinglePixelPackedSampleModel spSM = new SinglePixelPackedSampleModel(DataBuffer.TYPE_INT,nwidth,nheight,bitMasks);
System.out.println("SinglePixelPackedSampleModel = "+spSM);
WritableRaster bmpRaster = WritableRaster.createWritableRaster((SampleModel) spSM, (DataBuffer) dbBMPInt, new Point(0,0));
System.out.println("WritableRaster = "+bmpRaster);
bmpImage = new BufferedImage(nwidth,nheight,BufferedImage.TYPE_3BYTE_BGR);
System.out.println("BufferedImage = "+bmpImage);
bmpImage.setData(bmpRaster);
catch (Exception exCrBm)
{ /* 001 start catch */
exCrBm.printStackTrace ();
} /* 001 end catch */
----------------------------------------------- end of code snippet --------------------
and this is the generated output.
File type is :BM
Size of file is :1600110
Size of bitmapinfoheader is :40
Width is :852
Height is :626
Planes is :1
BitCount is :24
Compression is :0
SizeImage is :1600056
DataBufferInt = java.awt.image.DataBufferInt@1774b9b
SinglePixelPackedSampleModel = java.awt.image.SinglePixelPackedSampleModel@8080b54
WritableRaster = IntegerInterleavedRaster: width = 852 height = 626 #Bands = 3 xOff = 0 yOff = 0 dataOffset[0] 0
BufferedImage = BufferedImage@b9e45a: type = 5 ColorModel: #pixelBits = 24 numComponents = 3 color space = java.awt.color.ICC_ColorSpace@3ef810 transparency = 1 has alpha = false isAlphaPre = false ByteInterleavedRaster: width = 852 height = 626 #numDataElements 3 dataOff[0] = 2
Any help appreciated
Regards
Wolfgang

Increase your maximum heap memory size.
Se -Xmx parameter of java.exe
Have a nice programming day,
Jos�.

'Embedded RP on IPv6' + System received a SegV exception

Hi.
I try to configure de folloing scenary - Embedded RP with IPv6
I used 3 cisco 2600 routers:'Cisco IOS Software, C2600 Software (C2600-ADVENTERPRISEK9-M), Version 12.4(5), RELEASE SOFTWARE (fc3)'
For cliente and server streamnig, i used Videolan-Client
I have end-to-end conectivity - in R1 i can ping sucessefully 2001:ddd::1
In R2, i have configured de serial0/1 with: IPv6 address 2001:ccc:beef:feed::1/32
in the same router, R2, i configured: 'ipv6 pim rp-address 2001:CCC:BEEF:FEED::1'
all routers have enable embedded rp: 'IPv6 pim rp embedded'
but when i put VLC to stream at address [FF76:140:2001:CCC:beef:feed::1], the cisco IOS reboot...
What is a problem?? bug in IOS, bad configurations??
i really apreciate you help
thanks in advanced.
thansk, Rui Bernardo
2001:AAA::/32...2001:BBB::/32...2001:CCC::/32...2001:DDD::/32
PC1--- .1[ R1 ].1---serial----.2[ R2 ].2---serial-----.1[ R3].1-----PC2
eth0.......ser0.......ser0/0......ser0/1........s0/0.....eth0/0
R1 con0 is now available
Press RETURN to get started.
15:51:59 UTC Mon Mar 4 2002: Unexpected exception to CPUvector 1200, PC = 0x814D7104, LR = 0x814D70E4
-Traceback= 0x814D7104 0x81F6CDB8 0x819528D8 0x81952914 0x827F6384 0x827F72C8 0x827E2C94 0x827E2EE8 0x827DB198 0x8280D6F0 0x8280D880 0x827DB8E4 0x8280CAF8 0x8280CCE8 0x827CC06C 0x827CB754
CPU Register Context:
MSR = 0x00009032 CR = 0x30009009 CTR = 0x806FAF98 XER = 0x80001C7F
R0 = 0x00000030 R1 = 0x85D5E0D0 R2 = 0x84AD0000 R3 = 0x00000001
R4 = 0x851AE3A0 R5 = 0x851AE1D4 R6 = 0x00000001 R7 = 0x68010000
R8 = 0x00009032 R9 = 0x00000000 R10 = 0x68010000 R11 = 0x84C10000
R12 = 0x02147698 R13 = 0xFFF4B634 R14 = 0x8519F1A8 R15 = 0x00000000
R16 = 0x84C9DBE4 R17 = 0x00000000 R18 = 0x84ED1C1C R19 = 0x84390000
R20 = 0x84390000 R21 = 0x84ED0000 R22 = 0x00000000 R23 = 0x00000590
R24 = 0x85417140 R25 = 0x00000001 R26 = 0x00000560 R27 = 0x00000024
R28 = 0x074050D8 R29 = 0x85D42318 R30 = 0x84FD18FC R31 = 0x84FD18FC
Writing crashinfo to flash:crashinfo_20020304-155159
=== Flushing messages (15:51:59 UTC Mon Mar 4 2002) ===
Queued messages
*** System received a SegV exception ***
signal= 0xb, code= 0x1200, context= 0x84e24818
PC = 0x814d7104, Vector = 0x1200, SP = 0x85d5e0d0
System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)
Copyright (c) 2003 by cisco Systems, Inc.
C2600 platform with 131072 Kbytes of main memory
program load complete, entry point: 0x80008000, size: 0x1c413c0
Self decompressing the image : ##########

Try ff7e instead of ffce for an Embedded RP

Download Servlet throwing Out Of Memory Exception

I am trying to download file of more than 500 mb through servlet but getting out of memory exception .
Before downloading i am zipping that huge file .
try {
     String zipFileName = doZip(file);
      file =null;
      System.gc();
      File inputFile = new File(zipFileName);
      InputStream fileToDownload = new FileInputStream(
                                        inputFile);
     response.setContentType("application/zip");
     response.setHeader("Content-Disposition","attachment; filename=\""
                                                  + fileName.replaceAll("tmx", "zip")
                                                            .concat("\""));
     response.setContentLength(fileToDownload.available());
     byte buf[] = new byte[BUF_SIZE];
     int read;
     while ((read = fileToDownload.read(buf)) != -1) {
               outs.write(buf, 0, read);
          fileToDownload.close();
               outs.flush();
                              outs.close();
}catch(Exception e ) {
//Getting out of memory.
}Please suggest solution for this .

cotton.m wrote:
My zip suggestion was as follows.
Take the file. Do not set the Content length header. Do set the Content encoding header to gzip. Create a GZIP output stream using the servlet output stream. Read the unzipped file in and output it through the gzip output stream.
This cuts out one full cycle of file reading and writing from what you are doing currently.Thanks for u r reply
InputStream fileToDownload = new FileInputStream(
                                        file);
response.setContentType("application/gzip");
response.setHeader("Transfer-Encoding", "chunked");
response.setContentLength((int) file.length());
GZIPOutputStream gzipoutputstream = new GZIPOutputStream(outs);
byte buf[] = new byte[BUF_SIZE];
int read;
while ((read = fileToDownload.read(buf)) != -1) {
     gzipoutputstream.write(buf, 0, read);
fileToDownload.close();
outs.flush();
outs.close();I made changes accordingly . Please provide u r view on this .

[FIXED] Constant corrected memory exceptions every minute

DUST.
Running my K8T Master2-Far for over 2 years, i started getting hundreds of corrected memory exceptions, which appeared in batches every minute on the dot. Also, BSOD for IRQ_NOT_EQUAL_OR_LESS_THAN. I was quite confident that this was not being caused by bad or faulty RAM. I have encountered a similar situation once before where a system totally refused to POST.
The problem was dust buildup, in both cases. This time, upon removing DIMM 1, i could clearly see thick dust on the contacts facing the cpu. This caused the POST failure in the previous case. Now, there was also a lot of dust buildup around around DIMM slot 1. So i cleaned it with a paint brush, then thoroughly cleaned it with Dust Off. I made sure to get out as much dust as possible from in and around the slots. PLUS i paid particular attention to getting the dust out from UNDERNEATH slot 1.
After i did this motherboard clean i no longer have coz corrected memory exceptions. I also changed the case to an air filtered one to prevent this from happening again.
Hope this helps!

Typo'd by T9:
Quote
i no longer have any corrected memory exceptions
PS-
@Bas: Thanks for the move. Wasn't sure whether it should go in this section or a general section, because it's sort of a universal dust issue.

Getting out of memory exception while loading images in web browser control one by one in windows phone 8 silverlight application?

Hi,
I am developing a windows phone 8 silver light application .
In my app I am displaying images in web browser control one by one , those images are the web links , the problem is after displaying 2 to 3 images I am getting out of memory exception .
I searched for this exception how to over come , everybody are saying memory profiling ,..etc but really I dont know how to release the memory and how to clear the memory .
In some sites they are adding this
<FunctionalCapabilities>
<FunctionalCapability Name="ID_FUNCCAP_EXTEND_MEM"/>
</FunctionalCapabilities>
by doing this am I free from out of memory exception?
Any help ,
Thanks...
Suresh.M

string HtmlString = "<!DOCTYPE html><html><head><meta name='viewport' content='width=device-width,initial-scale=1.0, user-scalable=yes' /></head>";
HtmlString = HtmlString + "<body>";
HtmlString = HtmlString + "<img src=" + source +" />";
HtmlString = HtmlString + "</body></html>";
innerpagebrowser.NavigateToString(HtmlString);
that image source is the web link for example www.sss.com/files/xxx/123.jpg .
Note this link is not real this is sample and image is of size 2071X3097
Suresh.M

Out Of Memory Exception While Loading Images in Windows Phone 8 Silverlight App?

Hi,
I am developing a windows phone 8 silver light app , I am loading high resolution images from web through image control , After loading 2-3 images I am getting outof memory exception ,
I am unable to catch this , and I am unable to break this exception , Can anyone tell me how to handle this exception,
I am searching solution for this from last 15 days but I am unable to find solution,
I tried by setting the bitmap image source to null by doing this also I am getting exception, I tried by using gc.collect() also ..
First I am loading list of images in listbox with lowres of size 100X100 , in selection change event I am changing the image source ,
My image control code is
<Canvas Width="480" Height="720">
<Image Width="480" x:Name="MyImage" Height="720" Stretch="Uniform" >
<Image.Source>
<BitmapImage x:Name="MyImage1"/>
</Image.Source>
<toolkit:GestureService.GestureListener>
<toolkit:GestureListener Flick="GestureListener_Flick_1"
PinchStarted="OnPinchStarted" DragDelta="GestureListener_DragDelta"
PinchDelta="OnPinchDelta"/>
</toolkit:GestureService.GestureListener>
<Image.RenderTransform>
<CompositeTransform x:Name="myTransform"
ScaleX="1" ScaleY="1"
TranslateX="0" TranslateY="0"/>
</Image.RenderTransform>
</Image>
</Canvas>
My listbox selection changed code is
GC.Collect();
GC.WaitForPendingFinalizers();
Classes.PgaeInfo ob = listpages.SelectedItem as Classes.PgaeInfo;
progressLoad.Visibility = Visibility.Visible;
LayoutRoot.Opacity = 0.8;
LayoutRoot.IsHitTestVisible = false;
StackPanel st = sender as StackPanel;
index = ob.pId - 1;
JArray jsonArray = JArray.Parse(json);
JToken jsonArray_Item = jsonArray[index];
string sour = "xxx.xxx.xxx.jpeg" (only one image for sample)
img.Source = null;
DisposeImage(bm);
img.Source = new BitmapImage(new Uri(sour));
MyImage1.UriSource = null;
MyImage1.DecodePixelHeight = (int)img.Height;
MyImage1.DecodePixelWidth = (int)img.Width;
MyImage1.UriSource = new Uri(sour);
Any help..
thanks..
Suresh.M

Hello Suresh,
Are you loading multiple images at once on one page? If so this is an expected behavior. There is limited memory available per app so it's important to not load too large or too many photos at once in your app.
If possible you can try to convert your Windows Phone 8 to Window Phone 8.1 so as to take advantage of the FlipView control which is built to handle photo gallery-like applications.
Also you can always run the Windows Phone Application Analysis tool to check on the application performance and memory usage. This will help you test and fine tune your app accordingly.
Let me know if this helps.
Abdulwahab Suleiman

Increasing Crashes "Read Only Memory Exception" HELP please!

Over the past month and a half I'm starting to get regular and increasing crashes, mostly in my Adobe CS3 programs with this error:
Read-only memory exception. A memory reference was made to an address that cannot be written to.
unresolvablePageFaultException
I am starting to get towards my wit's end and want to rule out hard drive or logic board problems. Today after I got this crash in Dreamweaver and Fireworks (for the first time in FW), all my programs stopped opening and responding. I am noticing in Activity monitor 2 continuous stalls:
175 UserEventAgent (Not Responding) 0.0 3 4.10 MB 722.06 MB
168 colormunkid (Not Responding) 0.0 1 8.20 MB 766.86 MB
Even after reboots.
Console said:
5/19/08 9:13:55 AM [0x0-0x182182].com.adobe.dreamweaver-9.0 2008-05-19 09:13:55.462 Adobe Crash Reporter[9245:10b] (null)
5/19/08 9:14:03 AM com.apple.launchd[152] ([0x0-0x183183].com.macromedia.fireworks[9240]) Exited abnormally: Segmentation fault
5/19/08 9:16:20 AM Acrobat[9259] NSDocumentController Info.plist warning: The values of CFBundleTypeRole entries must be 'Editor', 'Viewer', 'None', or 'Shell'.
Crash reporters say:
Version: Adobe Fireworks CS3 version "9.0.1.1213" (9.0.1)
Code Type: PPC (Native)
Exception Type: EXC_BREAKPOINT (SIGTRAP)
Exception Codes: 0x0000000000000001, 0x00000000935dde9c
Crashed Thread: 0
Application Specific Information:
* Terminating app due to uncaught exception 'NSInvalidArgumentException', reason: '* -[NSCFType count]: unrecognized selector sent to instance 0x1283b740'
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x24836e70
Thread 0 Crashed:
: Dreamweaver
Path: /Applications/Adobe Dreamweaver CS3/Dreamweaver.app/Contents/MacOS/Dreamweaver
Parent: WindowServer [84]
Thread: 0
Exception: EXCBADACCESS (0x0001)
Codes: KERNINVALIDADDRESS (0x0001) at 0x283040ff

I am having a very similar problem with Dreamweaver 8 running
on OS X10.4.11.
If I choose passive FTP, Dreamweaver appears to upload a
file, when in fact the error logs reports that the file could not
be upload because it was not found, or because of permission
problems.
If I do not upload with passive FTP , Dreamweaver 8 crashes
& Dreamweaver 8 loses the site's root folder, informing me that
it cannot be found and I must use the manage sites feature to
recreate the cache for the site that was there.
If I use FETCH, no problem... all files are uploaded
successfully.
I recently had a hard drive failure on my Mac, had a new HD
installed by the folks at the Genius Bar, and thought perhaps my
new HD was buggy... however, now it seems there must a a
permissions problem built into the Dreamweaver FTP protocols.
I have not seen a patch for this, although when I reinstalled
the software, I did download all updates.
I know my reply offers no solutions, but I do thank you for
your post.

System.Reflection.TargetInvocationException: An exception occurred during the operation, making the result invalid.

When I run my app on device and the internet is connected its ok, but if I use the emulator (althought the internet is connected):
$exception{System.Reflection.TargetInvocationException: An exception occurred during the operation, making the result invalid. Check InnerException for exception details. ---> System.Net.WebException: The remote server returned
an error: NotFound. ---> System.Net.WebException: The remote server returned an error: NotFound.
at System.Net.Browser.ClientHttpWebRequest.InternalEndGetResponse(IAsyncResult asyncResult)
at System.Net.Browser.ClientHttpWebRequest.<>c__DisplayClasse.<EndGetResponse>b__d(Object sendState)
at System.Net.Browser.AsyncHelper.<>c__DisplayClass1.<BeginOnUI>b__0(Object sendState)
--- End of inner exception stack trace ---
at System.Net.Browser.AsyncHelper.BeginOnUI(SendOrPostCallback beginMethod, Object state)
at System.Net.Browser.ClientHttpWebRequest.EndGetResponse(IAsyncResult asyncResult)
at System.Net.WebClient.GetWebResponse(WebRequest request, IAsyncResult result)
at System.Net.WebClient.DownloadBitsResponseCallback(IAsyncResult result)
--- End of inner exception stack trace ---
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at System.Net.DownloadStringCompletedEventArgs.get_Result()
at FitnessApp.BL.ServerConnection.wc_DownloadStringCompleted(Object sender, DownloadStringCompletedEventArgs e)
at System.Net.WebClient.OnDownloadStringCompleted(DownloadStringCompletedEventArgs e)
at System.Net.WebClient.DownloadStringOperationCompleted(Object arg)}
System.Exception {System.Reflection.TargetInvocationException}
this is the stack trace:
at System.ComponentModel.AsyncCompletedEventArgs.RaiseExceptionIfNecessary()
at System.Net.DownloadStringCompletedEventArgs.get_Result()
at FitnessApp.BL.ServerConnection.wc_DownloadStringCompleted(Object sender, DownloadStringCompletedEventArgs e)
at System.Net.WebClient.OnDownloadStringCompleted(DownloadStringCompletedEventArgs e)
at System.Net.WebClient.DownloadStringOperationCompleted(Object arg)
this is my code:
void wc_DownloadStringCompleted(object sender, DownloadStringCompletedEventArgs e)
try
if (e.Error != null)
string error = e.Error.Message;
string functionCall = e.UserState.ToString();
if (!string.IsNullOrEmpty(e.Result)) //this line throws an exception
if (functionCall == "getProductCode")
ProductsList productsList = JsonConvert.DeserializeObject<ProductsList>(e.Result);
if (productsList.products != null)
serverProducts = productsList.products.Select(p =>
new BE.Product
Product_code = p.PID,
Product_name = p.Name
}).ToList();
else
serverProducts.Clear();
if (DataDownloadCompleted != null)
if(functionCall =="getProductCode")
DataDownloadCompleted(this, new BE.StringEventArgs("getProductCode"));
catch (Exception)
throw;
public void searchProductCode(string productName)
try
if (DeviceNetworkInformation.IsNetworkAvailable && DeviceNetworkInformation.IsCellularDataEnabled)
wc.DownloadStringAsync(new Uri(baseURI + "get_products_json.php?search=" + productName), "getProductCode");
else
throw new Exception(FitnessApp.Resources.AppResources.ErrorServerConnection);
catch (Exception )
throw ;
Any solution?
thank you..

The server did not find the resource you asked for.
You might want to make sure your emulator is connected to the internet and can go online.
http://blogs.msdn.com/b/wsdevsol/archive/2013/10/01/why-can-t-the-windows-phone-emulator-go-online.aspx

-17500 System Our of Memory Exception

Similar Messages

Maybe you are looking for