1900 Switch console problem
Hello guys!
I have a cisco 1900 swtich attached to my computer via console port. Everything seems to be ok, but I am unable to reach the prompt because the Management Console is greeting me instead of the well-known prompt. How can I get the prompt?
Could someone help me?
Thank you in advance
Hello guys!I
have a cisco 1900 swtich attached to my computer via console port.
Everything seems to be ok, but I am unable to reach the prompt because
the Management Console is greeting me instead of the well-known prompt.
How can I get the prompt?Could someone help me?Thank you in advance
Hi ,
I agree with leo 1900 is menu driven switches so will be getting a menu based promtp,check out the below link hope to help !!
http://www.cisco.com/en/US/docs/switches/lan/catalyst2900xl_3500xl/catalyst1900_2820/version6.x_7.x/cat1900/icg/19ictrbl.html
If helpful do rate the post
Ganesh.H
Similar Messages
-
Catalyst 1900 switch issue - internal speed
Hello,
I have a catalyst 1900 switch which has been working for years without any issues. It is connected to a single subnet on one side (10 machines all on same class C) and to a service provider switch on the other.
Recently the ftp speeds from machine to machine on the inside became very slow (20K) on a 10M port, slightly faster on the 100M port.
The external (internet side) to internal machines however has not changed and is still fast as ever.
Has anyone ever come across this sort of problem and if so where could I start to troubleshoot it ?
Thank You
BurtHi,
Thank you for your response.
The switch (LAN side) is connected directly to 10 machines (these are webservers with multiple IPs configured)
xx.xx.xx.6-250
Switch itself is xx.xx.xx.254
*** Uptime is 19days (after a reset to try to find this problem)
*** STP (port fast mode) is enabled on all ports
*** Monitoring the receive statstics for each port shows FCS errors and Alignment Errors about 2% (each) of the total good frames. I am not sure if this is normal however there were always some FCS and Alignment errors.
*** Monitoring transmit statistics shows no errors.
*** the switch reloads when reset
*** not sure how to get crashinfo on this switch.
You can contact me offlist at [email protected] if you need report info as this appears to be limited to 4000 chars.
THank You
Burt -
I am doing a question in which I have to make a simple ATM program that can withraw and deposit money as many times as the user wants. To exit the program the user has to hit "x". I have to use a switch statement. Im getting incompatible type errors after compiling it. Can anyone help me? Sorry if the formattings not too good.
//ATM.java
//This program reads in a user's opening balance and performs a withdrawal or a deposit at the request of the user
import java.text.*;
public class ATM
public static void main(String args[])
int balance;
char withdrawal, deposit, choice;
//Ask for the opening balance
System.out.print("Please enter your opening balance");
balance=UserInput.getInt();
//Find out what the user wants done
System.out.print("What would you like to do? (Withdrawal, Depositor Exit(x))");
choice=UserInput.getChar();
switch(choice){
case "w":
while(balance>0)
System.out.print("How much would you like to withdraw?");
withdrawal=UserInput.getChar();
balance=balance-withdrawal;
System.out.print("Your remaining balance is " + balance);
break;
case "d":
while(balance>0)
System.out.print("How much do you wish to deposit?");
deposit=UserInput.getChar();
balance=balance+deposit;
System.out.print("Your new balance is " + balance);
break;
case "x":
System.out.print("Goodbye and thank you for using this program");
break;
default:
System.out.print("We were not able to process your request, please try again");
break;
}Type a reply to the topic using the form below. When finished, you can optionally preview your reply by clicking on the "Preview" button. Otherwise, click the "Post" button to submit your message immediately.
Subject:
Click for bold Click for italics Click for underline Click for code tags
Formatting tips
Message:
Add topic to Watchlist:
Original Message:
Switch statement problem
Xivilai Registered: Mar 3, 2007 9:52 AM Mar 3, 2007 10:06 AM
I am doing a question in which I have to make a simple ATM program that can withraw and deposit money as many times as the user wants. To exit the program the user has to hit "x". I have to use a switch statement. Im getting incompatible type errors after compiling it. Can anyone help me? Sorry if the formattings not too good.
//ATM.java
//This program reads in a user's opening balance and performs a withdrawal or a deposit at the request of the user
import java.text.*;
public class ATM
public static void main(String args[])
int balance;
char withdrawal, deposit, choice;
//Ask for the opening balance
System.out.print("Please enter your opening balance");
balance=UserInput.getInt();
//Find out what the user wants done
System.out.print("What would you like to do? (Withdrawal, Depositor Exit(x))");
choice=UserInput.getChar();
switch(choice){
case 'w':
while(balance>0)
System.out.print("How much would you like to withdraw?");
withdrawal=UserInput.getChar();
balance=balance-withdrawal;
System.out.print("Your remaining balance is " + balance);
break;
case 'd':
while(balance>0)
System.out.print("How much do you wish to deposit?");
deposit=UserInput.getChar();
balance=balance+deposit;
System.out.print("Your new balance is " + balance);
break;
case 'x':
System.out.print("Goodbye and thank you for using this program");
break;
default:
System.out.print("We were not able to process your request, please try again");
break;
} -
I am having issues with Catalyst 2960 Switch Console. Switch boots up fine and the process shows up on the console. But after the boot-up, console stops responding. It also does not respond to Break sequence at the boot-up. Any solutions? I am using Putty with 9600 8n1 settings.
Thanks
HassanCheck the settings:
Please confirm if it helps
Parvesh
Remember marking helpful posts. -
Cisco 1900 switch support vtp version2 and etherchannel or not?
cisco 1900 switch support vtp version2 and etherchannel or not?
Please help and reference.
Thank in advanceHello,
Fast Etherchannel is supported on 1900 switches.
Please refer the below URL for details:
http://www.cisco.com/univercd/cc/td/doc/product/lan/28201900/1928v9x/ee_scg/overview.htm#xtocid72765
I "think" you need to have Enterprise Edition Software. In case if you have a standard version, then you need to purchase the upgrade kit to upgrade to enterprise version.
As far as I know, VTP V2 is not supported on the 1900.
By the way, 1900 swiches are End of Sale and the last date of support is July, 2007.
http://www.cisco.com/en/US/products/hw/switches/ps574/prod_bulletin09186a008009257d.html
I hope it helps.
Regards,
Arul -
Problem Accessing FWSM From Switch Console
Hi,
I have a 6509 with FWSM in module 4. FWSM is configured in single context mode. After I configured passwords and authentication on the FWSM, I can no longer access the module using "session slot 4 processor 1" when connecting to the 6509 switch via console. Please note that if I ssh to 6509 then I can get to FWSM successfully.
Obviously I can remove authentication config to resolve the issue for now but I need to keep them in the final configuration and cannot figure out how they would cause the above issue to find a workaround ...
My Authentication config:
enable password ew9KHLwZJ3Ih2ff5 encrypted
passwd GQwTW2VuxBDYJJlK encrypted
username admin nopassword privilege 15
aaa authentication ssh console TACACS+ LOCAL
aaa authentication http console TACACS+ LOCAL
aaa-server TACACS+ protocol tacacs+
aaa-server TACACS+ (management) host x.x.x.x
timeout 5
key xxxxx
http server enable
http x.x.x.x 255.255.255.255 management
ssh x.x.x.x 255.255.255.255 management
telnet timeout 5
ssh timeout 5
console timeout 0
Thanks in advance for your help ...
AliThe test aaa-server command lets you verify that the FWSM can authenticate users with a particular AAA server, and for legacy VPN authorization, if you can authorize a user. This command lets you test the AAA server without having an actual user who attempts to authenticate or authorize. It also helps you isolate whether AAA failures are due to misconfiguration of AAA server parameters, a connection problem to the AAA server, or other configuration errors on the FWSM.
-
Virtual console problem after switching runlevels
After switching into runlevel 5, the cursor on all virtual consoles (1-5) is stuck at the top left of the screen, and screen scrolling is disabled.
If I boot with runlevel 3, everything works fine, until I manually change into runlevel 5.
I'm not sure if this is related to the latest Xorg upgrade, but things used to work well until not long ago.
--EladSounds familiar. If you have similar hardware... is http://bbs.archlinux.org/viewtopic.php?id=61517 of any help?
-
Weird tty console problem if I leave X (e g I press ctrl+alt+F1)
Hello,
I have a weird problem with my console. When I leave Xorg, by pressing ctrl+alt+F1 for example to get to a console, the console is a horrible mess. It is a working console, but it looks so terrible you cannot recognize a single character. Little multi-colored squares are all around the screen and some are blinking representing the cursor. The conosle however, still works as I can blindly type things like top and press enter and watch the squares dance as top runs.
Anyone heard of this problem before?
Thanks and sorry for posting so much in the forums,
e^1Yeah I believe it is a bug with the nvidia driver for that card.(Maybe others?)
I switched to the nv driver and the problem hasn't come back. -
I had a problem with a switch on my network..the problem that is boot normally when i start it, but no switching function, and no ping between client unless the ports work well!!
Hi
Do revert back the type of switch which you are using and also usually all the equipments takes time for initialization,power on self test,loading the bootstrap process,loading the ios code and the configuration.
once it pass thru all these stages it starts functioning as u desire to do so.
you can very well monitor all these process by getting onto the console port of the switch which will give you a fair idea about how the systems gets onto active mode.
if you face some issues after normal bootup process you can very well check the configuration part if its already done and verify the same for possible causes.
Again if the ports are in shut state u can very well enable them off using no shut command udner the interface config mode..
if possible do post out the startup process and the show run of your switch captured from the console..
regds -
Hi Experts,
I am trying to attach Forum into a collaboration room. I have used the standard Forum iView and copied to as a Delta link and changed the "Forum Configuration' property to Forum Administration to access the Forum Admin Console.
When I tried to Preview the iView to access the Forum Admin Console I have been taken to a Jive Forums Setup screens which has Five Steps ->
Install Checklist
Datasource Settings
User System
Email Settings
Admin Account
I am in the Install Checklist screen which has five checks of which last two checks are failed in my case, so the 'Continue' button at the bottom of the screen is disabled.
The two failed checks are -
The location to the 'jiveHome' directory has not been set. Please enter a valid path.
A valid Jive Forums 5 license does not exist.
Can you please help me out?
Regards
ArindamHi All,
I got it working now!!
I was using the URL as http://127.0.0.1:8080/xlWebApp and for some reason this is the problem. When I switched it to http://localhost:8080/xlWebApp everything is working now.
Thanks -
Hi,
Have recently upgraded weblogic from v6.0 to 6.1 SP5. In the wen admin console, going into configurations pages gives:
Exception display on screen from the Admin console.
=====>
javax.servlet.ServletException: Cannot use ServletOutputStream because a PrintWriter is being used. User getWriter() instead. This included request was probably nested in a Jsp BodyTag"
errors.
Can anyone shed any light on this matter?
Thanks in advance.
WayneHi All,
I got it working now!!
I was using the URL as http://127.0.0.1:8080/xlWebApp and for some reason this is the problem. When I switched it to http://localhost:8080/xlWebApp everything is working now.
Thanks -
Big installati​on and switching IP problems with FIOS
Okay, here's my problems. A little background first. We ordered the FIOS bundle for our computer and also for our son's computer. He will use the router and go wireless. We had Verizon DSL with AOL, he had MSN dial-up. The tech installer arrives yesterday. Does everything he's supposed to--I guess. But, when he's almost finished, he mentions we need an ethernet adapter for my computer and my son needs a wireless adapter to pick up the signal. My son runs to Best Buy and purchases both. It cost $97 for both. First, I THOUGHT this was all supposed to be included! Why did I have to spend an additional $97 on these items? Shouldn't they have been included? As my son arrived back from Best Buy, the tech guy was in the process of leaving. He told us WE were supposed to install the ethernet adapter and the wireless adapter ourselves--AND HE LEFT!!! Luckily my son is somewhat computer savvy and did it. We now have FIOS internet thanks to our son! However, the tech guy did absolutely nothing with my son's computer.
Second, we sit down to check out our new FIOS cable. One problem, the channels weren't even comparable to our old Comcast cable HD channels. Not even close. The HD channels had a line running through them and weren't even in HD! We called tech services. The same tech guy comes back, hands us 4 bundles of cables, tells us to take out the coax cable and instead use the new A/V--Red, Blue and Green cables, AND LEAVES.....AGAIN!. WE, more precisely, our son, had to install them on both T.V.'s because tech guy had another home to do and didn't have the time. My son did it.....we now have FIOS cable--in HD, thanks to our son!
Third, I would like to drop my AOL and my son would like to drop his MSN and we would both like to use Verizon for our homepage and receive email through them now. We've read the FIOS internet and TV user guide and WE STILL cannot figure out how to switch over. I did manage to get my Verizon.net email and have used TrueSwitch, But we're afraid of cancelling our AOL and our son is afraid of cancelling his MSN for fear we won't be able to log on to a homepage. There's no icon on our desktops for Verizon's homepage. Tech service has been no help. My son has no clue how he can change from his MSN homepage from to Verizon Central because there is no mention on how to do that in the book or on any of the help pages. He has no clue how to change his account (email, homepage etc), from MSN to Verizon. The book is unclear and hard to follow. The help sites are the same. Links don't work, downloads won't download. I have a college degree and can't even follow these directions! It makes me want to cancel the whole thing and go back to regular cable. There's not even a button to log off the FIOS internet on my computer or on my son's computer. I think FIOS has been running for 2 days--even when the computers are shut off. Is it supposed to do that?. My son runs to Best Buy and purchases both. It cost $97 for both. First, I THOUGHT this was all supposed to be included! Why did I have to spend an additional $97 on these items? Shouldn't they have been included? As my son arrived back from Best Buy, the tech guy was in the process of leaving. He told us WE were supposed to install the ethernet adapter and the wireless adapter ourselves--AND HE LEFT!!!
Verizon has no way of knowing what your PC has prior to showing up... It is assumed that your PC's are already up to snuff as probably 99% of PC's now-a-days have a Ethernet card built in... Since your Pc's did not have the hardware neccesary to use the sevice, you are responsible for your PC's... The field tech is not responsible for installing third party equipment of any kind
Second, we sit down to check out our new FIOS cable. One problem, the channels weren't even comparable to our old Comcast cable HD channels. Not even close. The HD channels had a line running through them and weren't even in HD! We called tech services. The same tech guy comes back, hands us 4 bundles of cables, tells us to take out the coax cable and instead use the new A/V--Red, Blue and Green cables, AND LEAVES.....AGAIN!. WE, more precisely, our son, had to install them on both T.V.'s because tech guy had another home to do and didn't have the time. My son did it.....we now have FIOS cable--in HD, thanks to our son!
That was wrong, the Field tech shoudl have setup your HD box with your HDTV witht he proper HD cords, the first time... and certainly should have done so the second time
Third, I would like to drop my AOL and my son would like to drop his MSN and we would both like to use Verizon for our homepage and receive email through them now.
Feel free to cnacel the other guys... Verizon is your Internet Service Provider.... The Internet is already being provided.... AOL and MSN are mearly Content providers... To set you home page inside internet explorer, click on Tool and then itnernet options... you will see the section for homepage... type in www.verizon.net or whatever you want it to be
Bob Robertson - Lighter Klepto - I steal lighters, not bandwith -
Management console problem after installing recommended patch cluster
Hello everyone.
I just got a new SUN 440 server, it didn't come with the solaris os installed and so I installed solaris 9 12/03 to it. The installation went fine and I could start the management console with no problems at all. Then I went to sunsolve.sun.com to download the latest recommended patch clusters for solaris 9 (this was yesterday Sept.-06-2006), I downloaded the file, checked it with md5sum, unzipped it, went to single user mode and ran the install_patch script. After the patch cluster finished installing I rebooted the server for the patches to take effect, I logged in, tried to run console management 2.1 and it starts OK but I cannot use any services it offers because it says (in the console events):
"Server Not Running: no solaris management console server was available on the specified server. Please ensure there is a Solaris Management Console server available on the specified host and that it is running"
When I click on "See Exception" I get (for a particular service that is... in this case com.sun.admin.fsmgr.client.VFsMgr - for managing file systems):
java.rmi.RemoteException: Server RMI is null:
at sun.com.management.viperimpl.client.ViperClient.lookupServer(ViperClient.java:376)and so on...
I already checked that the service is running on port 898 and it seems that there is no other app. using that same port. I also restarted the service using /etc/init.d.init stop/status/start but I get the same results.
I don't know solaris very much and don't know what else to do, please help.
Thanks in advance.Well, I guess what you see isn't what you get.
Guess I'm used to the fact USENET just left things formatted the way they were :-O -
X-fi audio console problem (winXP
The audio console stop work and i get this error msg "The audio device supported by this application is not detedted. The application will exit."
My system is on for like 22day now and it's working fine until today.
Any have a idea why it doesn't detect it's
When i check system info---> Conflicts/Sharing, the Memory Address is the same/share by PCI standard PCI to PCI bridge and X-fi.
Is there something i could do about that? will that cause a problem?Message Edited by snakebite2 on 05-0-2006 02:40 PMI am now having the same problem!! I have done everything under the sun and nothing seems to work... Any ideas.. Tried clean installs of drivers and creative software and still Nothing works!!
thanks -
OL7 Virt-manager console problem
Hi,
Here's the problem:
Im using virt-manager on a OL7 server. I use Xming on a client pc to connect to the server and launch virt-manager. I can press "run" and the virtual-machine will start in background, but when I try to open the console, both the console and the virt-manager window crashes automaticly. (The virtual-machine stay running in background)
The thing is, it was working perfectly fine with OL6, the problem started after an upgrade to OL7. I also have a brand new server with a fresh installed OL7 and it has the same issue. And I also get the same problem if I try from different client Pc.
When the console crashes, I get this allert on the Server:
virtual machine manager crashed
python2.7 killed by sigabrt oracle
/etc/ssh/sshd_config
X11Forwarding yes
X11DisplayOffset 10
X11UseLocalhost no
The following are installed in the latest version:
xorg-x11-xauth
xterm
Im still new at this, tell me if more specific information is needed.
Thanks,
-Gab.What exactly where you testing and what other configurations exist or do not exist that may influence the problem, e.g. IPv6?
(https://bugzilla.novell.com/show_bug.cgi?id=618068)
Here is what the sshd_config man page has to say about the configuration parameter:
X11UseLocalhost
Specifies whether sshd(8) should bind the X11 forwarding server to the loopback address or to the wild-
card address. By default, sshd binds the forwarding server to the loopback address and sets the hostname
part of the DISPLAY environment variable to ``localhost''. This prevents remote hosts from connecting to
the proxy display. However, some older X11 clients may not function with this configuration.
X11UseLocalhost may be set to ``no'' to specify that the forwarding server should be bound to the wild-
card address. The argument must be ``yes'' or ``no''. The default is ``yes''.
So does virt-manager work with X11UseLocalhost=no but the console of a VM works only with X11UseLocalhost=yes. Maybe, but I would rather find this strange and the problem might be something else. Why the OP has X11UseLocalhost=no is another question though.
Maybe you are looking for
-
F110 Automatic Payment Run Scheduling
Hello SAP Crew! I know in SAP F110 we can schedule future date runs for proposal and Payment Runs but .. my question is there a way to schedule recurring Proposals and Runs. Scenario: Payment program should run every 3rd Monday of the month as sched
-
Guyz What wrong with my query? Im using form 6i database 9i IF :CTRL.DIS_SRCH IS NULL THEN ALERT_MESSAGES('Enter some words to search database'); ELSE SET_BLOCK_PROPERTY('COR_ITEM_DESCP', DEFAULT_WHERE, UPPER('ITEM_DESCP')LIKE UPPER('%'||:C
-
Certificate signing operation was not successful - Exit code: 127
We are using SCOM 2012 SP1 CU2 to deploy agent to a Redhat Linux. In the process, we are able to successfully discover the target machine, but when we click on "Manage" we get this below error message. Why should there be scxadmin file or directory
-
Brand new MacBook Pro 2012 not booting install of Mountain Lion
Hi, I have a brand new 15" MacBook Pro 2012 model (2.6Ghz, 8GB Ram) - works fine on OS X Lion. As I had just bought it I decided to upgrade it to Mountain Lion straight away, and here's where the problems start. After apparent install the machine re-
-
Accessing OS/390 through Java and reading VSAM files
I hope this is the apporiate forum for this question. I am fairly new to Java but am interested in learning about using Java to connect to a mainframe and read a VSAM file. So my questions are: 1.) Where can I find information on this on this topic 2