1xev were i should have 3 g

I have 1xev were i should have 3g and cant get wifi or my internet to work how do i correct this

1xev..lowercase usually means you are connected to your provider network, 1XEV ...uppercase is shown when your are connected to your provider and blackberry data. On some carriers, 1XEV...uppercase, is shown instead of 3G, but it's a 3G connection. Have you tried doing a battery pull? Do you have a BIS plan? If you don't have a BIS plan you won't have the internet and email and will not see the the 1XEV.

Similar Messages

My daughter accidentally restored her ipod4 to factory settings so I restored from the last iCloud backup. Her photos were all on camera roll so I believe should have been backed up, but none of them have been restored. Why?

My daughter accidentally reset her ipod4 to factory settings so I restored from the last iCloud backup. All her photos were on camera roll so I believe they should have automatically been backed up, but none have been restored. Why?

When she plugged in the ipod last night it backed up again so that now shows as the latest backup. No previous backups are listed so I do not seem to have the option to rerun the old one. She had many pictures on the camera roll taken from well before July. I can only presume that the backup in July must have been incomplete - but then I didn't think it was supposed to list as an option to restore from. Luckily many of the photos had been backed up on the pc but I am very frustrated as to why the icloud backup didn't protect them. Thank you for your advice though, I appreciate it.

I think we should have been given the option to move books from iTunes to iBooks. All mine were downloaded CD booklets and inserts which were in their right place in iTunes. What do others think?

I think we should have been given the option to have our books moved from iTunes to iBooks. All mine were CD booklets and inserts downloaded with the CDs, and the obvious place for them was in iTunes. As it is now, I can no longer use my own convention for naming, sorting etc. The sort facility in iBooks does not work. What do others think?

I think we should have been given the option to have our books moved from iTunes to iBooks. All mine were CD booklets and inserts downloaded with the CDs, and the obvious place for them was in iTunes. As it is now, I can no longer use my own convention for naming, sorting etc. The sort facility in iBooks does not work. What do others think?

Do I go with the MacBook pro or the MacBook air? I'm going into 8th grade and were required to have labtop. I Also edit videos for my YouTube chanel. Which should I get 13 inch model.

Do I go with the MacBook pro or the MacBook air? I'm going into 8th grade and were required to have labtop. I Also edit videos for my YouTube chanel. Which should I get 13 inch model.

MacBook Air: thin, light, fast SSD storage. Cons: not upgradable, expensive.
MacBook Pro: cheaper, upgradable, better graphics card, more storage and RAM for the buck. Cons: not as light
you'll get more for the money with the MacBook Pro. the Air is better as a second computer for people.

Wordpress locally with MAMP and when I tried to customize my permalinks I get this message "If your .htaccess file were writable, we could do this automatically, but it isn't so these are the mod_rewrite rules you should have in your htaccess file.

I installed MAMP Pro and Wordpress locally and when I tried to customize my permalinks I got this message "
If your .htaccess file were writable, we could do this automatically, but it isn’t so these are the mod_rewrite rules you should have in your .htaccess file. Click in the field and press CTRL + a to select all."
Where can I find the .htaccess file?

Have you tried there Forums?
MAMP Forum • Index page
WordPress › Support

What the Macbook Pro should have

Hi guys, 2 weeks ago I purchased my first Apple laptop - the Macbook Pro 13", before that (and still sometimes) I used PC. Even though the design is great, there are things that could be done to make it perfect. Here is my list, please tell me what you think about it.
1 - A delete button one the keyboard, I noticed that the Macbook Pro doesn't have one before purchasing it, but after using if for 2 weeks noticed how important it is.
2 - The 2 USB ports are quite inconvenient because they are next to each other, it would be more convenient if they are from both sides instead, like Macbook Air. I have devises that are a bit wider than the other ones, so when one of these is plugged in, the other USB port is unusable. Speaking of which USB 2.0 isn't good! The ThunderBolt port is great but there are no devises yet that can take any advantage of it, so in the meantime USB 3.0 would be great.
3 - HDMI port - most of the laptops already have it, I don't see why none of the Macbooks has it. If I want to connect my Macbook Pro to my TV, I have to spend extra money on MiniDisplay to HDMI adaptor (it's not like Apple products are any cheep, so spending extra money on things that should have been there on first place is NOT good).
4 - Numerical Keyboard - I know there is no room for it, but a button like Caps Lock could be used, when it's pressed certain buttons from the keyboard could act only as numerical keyboard and when pressed again, the keyboard could be back to normal.
5 - The screen resolution of the 13" Macbook Pro should have been like the 13" Macbook Air.
6 - The CD Drive is unnecessary, nobody uses it nowadays. Nobody listens to music from a CD and nobody installs any software from a CD, everyone uses the Internet for these things, the little part of people who are still using CDs, DVDs, etc. have other devises such as: DVD or Blue-ray players, HiFi systems and Desktops. The room that is taken by the Optical Disk could be used for a bigger battery.
7 - Better cooling system - when watching a move the laptop gets so hot that I literally can't put it on my lap (lol what a paradox, a laptop that cannot be put on a lap), also I would love to be able to close the lid and leave the laptop works (it is great when downloading big files or scanning software is used), but with that cooling system I'm afraid that it would overheat.
8 - Last but not least - The screen bezel. It's too big, Macbooks should be bezelless, it would make them much better looking.

DS had some great points, I'll chime in as well.
1.) I agree, it'd be handy to have. It definitely took some getting use to but once you do and modify your keyboard workflow it becomes second nature.
2.) I ended up investing a USB extension cable, Apple makes them I believe. At least they use to, I've had mine for years. While the cable dangling off the side of the machine is a bit of an annoyance, it's a necessity if I want to double up my AirCard (USB) with a thumb drive. USB 2.0 is still the "standard" and as such it's going to be the de facto peripheral port. Apple is historically slow about adopting non-standard peripheral interfaces unless they pioneer or champion it. It wouldn't surprise me if Apple still doesn't offer USB 3.0 this time next year. Thunderbolt/Light Peak is brand new tech, and as such it's going to take a while to have peripherals that support it. There are NAS devices that have it, they were just announced this week.
Here's a link regarding its deployment - http://www.tuaw.com/2011/04/13/intel-distributing-thunderbolt-developer-kits-thi s-quarter-more/
3.) I agree that HDMI would be nice but with Thunderbolt supporting HDMI, I really don't see Apple adding another video out port. There's no room left on the I/O strip on the 13" MBP for it. Apple use to include adapters (when the MBP first came out) but they've since stopped doing that and gouge with adapters. Thankfully there are numerous 3rd party offerings at a fraction of the price.
4.) I agree, I forget which "redesign" of the keyboard layout got rid of the Num Lock key. I know my 15" MBP (Santa Rosa) has it. I currently use my iPhone as my numerical keyboard, there's a great little app that pairs the phone to your computer via Bluetooth. It works great as an alternative.
5.) Marketing 101. By introducing it via a future revision this encourages current owners to want to upgrade/switch and thus move more units and tout it as a "feature upgrade." I was pretty shocked the i5/i7 update to the MBP 13" did not introduce the 1440 resolution.
6.) This is where you'll get disagreement. Rule #1 of proper Internet forum posting, don't use words like: everyone, everyone, most, all, nobody, no one, etc. Especially without evidence to back it up. While you don't use it, people do. I use mine daily, my co-workers use their drives daily. That's 11 people right there, which is 11 more than "nobody."
7.) Apple has never called their computer a "laptop." They've always referred to is as a portable computer. Matter of fact, they strongly discourage the use of their portable computers on your lap due to how the heat dissipation process works through the top case. So the problem(s) you're experiencing are to be expected, you're using the machine in a method that is not recommended by the manufacturer. They even discuss that in the "Getting Started" booklet that came with your machine.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Open PO items that should have been already delivered

Hi,
is there a transaction where you can see the open PO items that should have been delivered already up to a certain date? If a PO has several scheduling lines and also several confirmations were entered for the scheduling lines only quantities should be displayed were the delivery date is due (based on the selection date/usually the current date) on no GR was made so far.
I tried already ME2N with selection parameter WE101 but this shows all open items (in past and future).
And a problem I have in general is, that I dont see a direct link between the scheduling lines and the confirmations.
Cheers
Mathias

ME2L gives the same result. I dont want to see the delivery schedules that are in the future but only the ones that are overdue (delivery date in the past and no GR received).
I checked ME2V, as I did not know it. But this is for warehouse people I guess. It shows with volume/weight info what is expected as GR per day on document level.

A 6 hour installation that should have only taken 30minutes!! Very unhappy customer!!

I am very upset about a recent purchase I made at your store. I bought a fridge (an open box item) and it was going to be delivered on Friday, March 28. The delivery guy (Jake) came at about 10:30 and hauled away our old fridge and brought in the new fridge BUT then the trouble began. Jake said that the hose part we bought won’t fit the waterline and we need an adapter (looks like the size of a nut or washer – just a little part) I asked him if he had this part on the truck and he said he doesn’t carry parts on the truck and told me I need to go to town (I live 30 miles out of town!) and go to the store and get the part – I was a little confused because he was supposed to be installing the fridge. I didn’t know much about the fridge so I said ok, what would I need to tell them and he said tell them you need an adapter that is 3/4” to a 1/2”. So he kinked my waterhose and put a bucket underneath it but it still dripped a little bit so I hurried to town (it is about 11:30 now) to Best Buy to get the adapter and the guy in the appliance area didn’t know what I was talking about so they called Jake and he told the Best Buy employee what I needed and the employee said they don’t carry that part….. so I went to Lowes and they didn’t know what I needed because it didn’t make sense to them that I would need a 3/4” to a 1/2” adapter. I then went to Menards and talked to the appliance department and then they didn’t know so I was sent to the plumbing department and the lady was very nice there but she also didn’t think it made sense that I needed a 3/4” to a 1/2” adapter because waterlines are usually 1/4”. So I called up Best Buy while still at Menards and they had Jake (the delivery /installer) talk to the lady at Menards and explain to her what I needed so he told her the same thing – I needed a 3/4” to a 1/2” adapter. She said that the only thing they would have is 2 options a 3/4” to 1/2” adapter or 1/2” to 1/2” adapter (they both looked like the size that would fit a garden hose!! I didn’t think that was right but that is what Jake from Best Buy – the delivery /installer guy told the lady at Menards. So I bought those 2 parts and raced back home because now it was 1:30pm in the afternoon after running around for 2 hours looking for an adapter that Jake said I needed. I got home and was immediately livid!! The two parts were what I thought TOO BIG! Both ends were only 1/4”! So I called Best Buy again and talked to Mike (I didn’t get a last name) he was very nice and tried to be helpful . I explained what happened from the beginning (around 10:45am till now 1:30pm) and told him this is outrageous I am missing a whole day of work because of this when I could have been to work by 11:30am if Jake did this correctly. I told him I can text him photos of everything 1) The end of the water line 2) the end of the fridge 3) both ends held up together 4) each end by a tape measure to show it was only 1/4”. He said that would be very helpful so he game me his number and I texted the photos to him and I got a call 2 minutes late and he said “umm… I am so sorry for the inconvenience but all you need is an adapter for a female end to a make end and they have those parts on their trucks”, I asked if he was being serious because it was around 2:30pm now and I still don’t have my fridge installed! Mike said he would call Jake and tell him to get to our house and put the waterline on with the part from his truck. Mike called back after talking to Jake and he said that Jake was in Crookston, MN for a delivery but would come right back to our house as soon as he was done. Jake got to our house around 3:30pm and came in and I showed him the parts that I bought that HE told the lady at Menards I needed. He said he didn’t know what to do. I told him I talked to Mike at Best Buy and he said you have the part on your truck. He said he would go look. He came back in (sure enough) with the part!!! He connected the waterline to the fridge and it was done (Literally 10 minutes) and left around 4:15pm. I am so disgusted with the incompetence of your delivery guy/installer, for something that should have taken a total of 1/2 hour or less. My fridge should have been delivered and installed and I should have been on my way to work by 11:00am to 11:30am. Instead I spend a whole day running around and make numerous phone calls that were NOT NECESSARY. Then I tried to call the store and explain about what happened but Nichole – said she was the Home Sales Manager, said there was nothing the store could do and didn’t even acknowledge the incompetence of the installer and she didn’t even attempt to resolve this issue. I have make attempts to get this matter resolved but have not received ANY responses, I am hoping someone will respond to this message?!?
Solved!
Go to Solution.

Hello magicmel,
I’m positive you were excited to receive your new refrigerator, and expected the installation to go smoothly. Our installers should be knowledgeable in their field, and able to troubleshoot issues such as you described. It’s truly regrettable that Jake may not have known which part you needed, and sent you on a trip across town to look for a part that was unnecessary.
After running from store to store only to find that the part needed for your refrigerator was in the installer’s truck, I can imagine how frustrated you would be, as I would be infuriated if I were in your shoes. While I’m glad to hear that Mike was able to get things resolved with just a few pictures, I apologize for any inconvenience this may have caused you.
I was able to locate your service order and refrigerator purchase, and I am sending you further information in regards to this experience via a private message. You can check your private messages by signing into the forum and clicking the envelope icon in the top right corner of the page.
Sincerely,
Tasha|Social Media Specialist | Best Buy® Corporate
Private Message

Just updated my iPhone 4S to iOS 7.0.4 --I should have known better! Wifi & Bluetooth are now dead!! (And so is my trust in Apple updates)

So, I've always considered myself a guy in the know for all things Apple. People are always coming to me for help with things as it relates to thier iPhones/ iPods/ iPads/ iOS and generally I can help them. I am an Amercan living abroad in Ghana, so a lot of ExPats bring their things to me for support. Being abroad, I find that I have need to carry mutiple phone lines (something that I would never do in the States). So I have three iPhones --my 4, 4S, and 5 (as soon as I get back to the States in a few months, I HAD planned to purchase the 5S).
Anyway, friends all laughed at me because they were all on some version of iOS 7 and I was happily content with iOS 6. I wasnt a fan of the new iOS and wasn't interested in updating. However, newly updated apps now forced me to update and so I did. I really should have read the thousands of dissuccuins first, as then I would have known that some iPhone 4S devices have issues. Unfortionately, the update to iOS 7.0.4 killed my wifi and bluetooth. Thinking it a software issue, I did a clean factory restore and sewt up the device as new. No luck, still not able to connect to any wifi or use my bluetook headset. I googled until my fingers hurt trying to find a solution; none of the alleged fixes do anything for me. I'm so disappointed in Apple.
I have no idea what to do. And I'm seriously reevaluating my opinon of Apple products. Too many people online say that contacting Apple hasn't really accomplished anything as iOS 7 updates seems to have effected the hardware. Which really ***** for someone like me.

Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.

No service on IPad 2 after upgrade to IOS 8. Waited a month to try it. A restart brings connectivity back for a while. If the iPad 2 was too old to receive this upgrade it should have been excluded from it.

Upgraded my iPad 2 to IOS 8. Waited a month as I saw all the problems other users were having. Now I am with them. No service. Connectivity restored only after a restart . These are necessary frequently. Last week I had a fully functioning iPad now I do not.
If the IPad 2 was not capable of handling the upgrade it should have been excluded. I have read the fixes, tried some, apprehensive about trying others. Why should the customers have to work to fix an upgrade meant to improve performance?
Any news on an IOS fix?
Any solutions other than wiping out everything and starting over? Have seen that several times. Backing up, wiping clean, refreshing, restoring...why do we have to struggle?
i am spending way too much time trying to get my iPad back to what I had. I am sure the genius bar is packed with iphone 6 users and the new edition iPads. No room for folks with "old" ones. And if I try something and fail then I have nothing at all.
Hoping for a "fix" from Apple as well as any ideas.

Hello, ik31.
Thank you for visiting Apple Support Communities.
Here is an article that I would recommend going through when experiencing this issue.
If your iOS device restarts, displays the Apple logo, or powers off while you're using it
http://support.apple.com/en-us/HT203899
Cheers,
Jason H.

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an

I bought the Adobe student version of Photoshop and Premiere Elements a few months ago - and now I am trying to use it, and the serial number that I have is incorrect - or it is only the registration number or something? It says I should have been sent an email with the serial number once the product was registered - But I never received this email. If anyone is able to help me with this issue - that would be great. the registration number is: PEPEP6-5578-6450-8871-9107 I am using a windows based system

If I were you I would first make sure CS6 was deactivated or signed-out. Then download Adobe's cleaner and remove cc, CS6 and any other creative application installed including Creative Cloud desktop application. Then install CS6 and use your CS6 serial number during the install to activate CS6 standard or extended which ever the serial number is for. CS6 Version 13.0 should the be activated. That level of CS6 is extremely bug ridden so be sure to the use CS6 menu Help>Updates to get CS6 updates. Windows should update to version 13.0.1.3 Mac to version 13.0.6. Not Subscription CS6 version 13.1.2...
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6

Show the company I work for that we should have one cluster

The company I work for have several projects where we are going to use RAC. The issue I'm having is they want each database to be in its own cluster hardware. I'm trying to show then that we should cluster all the hardware together and make small RAC database in the one cluster.
Does any know of anyone that has written a go doc how why you should have one cluster versus multiple clusters.
Example of what they are thinking of doing note this is all separate hardware cluster1 will not be cluster with cluster2 I'm try to show them if we cluster it all together we get more power and may not need so much hardware:
Project 1
cluster1_dev
2 nodes
cluster2_qa
4 nodes
cluster3_prd
4 nodes
Project 2
cluster2_dev
2 nodes
cluster2_qa
4 nodes
cluster2_prd
4 nodes
What I’m proposing is the following setup:
Cluster_dev
3 nodes
Project1 instance cluster on all 3 nodes
Project2 instance cluster on all 3 nodes
Cluster_qa
6 nodes
Project1 instance cluster on all 6 nodes
Project2 instance cluster on all 6 nodes
Cluster_prd
6 nodes
Project1 instance cluster on all 6 nodes
Project2 instance cluster on all 6 nodes

I am always impressed by choosing rac without having expressed what types of failures to be covered.
maybe you really don't need rac ...
moreover, rac is imho really not 2 nodes oriented but well grid oriented.
a lot of small server in the same cluster is for me the way to go or the the way to think.
Services features were introduced to allow one rac db to be shared by multiple applications.

Fixing a sequence created as 29.97 - should have been 25fps

It's been many years since I edited anything, as I primarily shoot commercials and edits are done by others much more qualified. My last Premiere software was purchased back when Photoshop 5.0 was new . . . so apologies in advance for this senior moment. I am now using Premiere CS5 build 5.0.1.
I shot this 2 camera fashion show as a favour for a friend and thought I did a very nice (but painfully slow) edit of a 6 minute pre-show and runway project. Hundreds of edit points and transitions . . . only to find on exporting to AME that I had stuffed up the sequence frame rate, which is to say it did not match my source FPS.
I shot both cameras as 25P, and created a source sequence @ 29.97 inadvertantly, then went on to create a multicam sequence (also @ 29.97, again, brain fart). I made all my edits and transitions on the multicam 29.97 sequence. I trancoded the sequence as 25p mp2 at high bit rate twice to see if I could get away with it. I tried both with frame blending and without, all at maximum render quality. I also tried to export it as a 29.97 movie and then let encore transcode it back to 25p. All the footage is jumpy as one would expect. The titles especially.
The 29.97 movie plays smooth as silk on my computer. . .
I then tried to then nest my multicam edited footage sequence in a new sequence that is created at 25p. Transcoded that whole project at 25p at all the recommended settings that I took from watching the top moderators sugestions. And that movie plays back just as jumpy.
While it would probably be good practice to re-edit the whole project again . . . I probably should be out trying to make a living right now instead of fixing a pet project for a friend. Fact is, I am not likely to let this just be, as it is too nice not to fix . . .
I thought of exporting and EDL and starting over, but I am not sure if that EDL would be any better in terms of sequence frame rate referencing. And the main thing also is that I thought by nesting the multicam sequence in a 25p sequence, that it should have taken care of all that anyway? Anyone know why that would not have worked, or what I should do now?
Your input and experience is greatly appreciated!
Cheers
Chris
PS; I have searched the forums first looking for answers, so please forgive if the answer was in so previous thread

Hey guys,
Thanks for the input. First off; I did think the transitions were intact, but only after looking closer, saw that all kinds of changes had been made. I did an EDL import but decided that I might just be better off fixing the copy and paste.
That said, We decided that the flash movie looked fine on his website and that for big screen, the H.264 movie I made looked great @ 29.97. SO I'm wrapping this up at that. I also got to play with the H.264 file on a USB stick and plugged into my PS3 which looked great as well, so that's something else I probably would not have tried otherwise.
All in all, I'm having a great time getting back into editing after years of simply shooting. I love PPro CS5. Actually, I'm having a ball with the whole master collection. My son needed it for school work, otherwise I may not have gotten into Encore, Illustrator and After Effects as well. Now I'm itching for a grunty box to make it all work without 4 hour 2 pass transcoding sessions. My 2 year old machine is choking!
Next time I'll pay attention to the basics . . . source footage sequence settings!
C

Nokia 5700 New Firmware Should Have This Change Lo...

Hello All!
After A Full Anlysis Of Nokia 5700 Xpress Music I want To Inform Nokia Those Changes Which Need To Be MAde In Nokia 5700 New Firmware.
Here They Are:
* Music Player SHould HAve Exit Button [It takes 2mb Ram When Run In Background].
* There Must An Application To Run Phone In Landscape Mode.
* Loudness Of Music Must Be Enhanced.
* Music Player Should Be Paused While There Is NAy Incomming Call.
* Camera Quality Should Be More Better.
* Camera Zoom Should Be 10X or More.
* More Visulaization Should BE Added.
* When Create ANy New Folder In Images Folder Through Gallery and Move All Images To Newly Create Folder Then Only One Image Moved To That Folder. This Bug Should Be Fixed.
* Radio Sound Must Be More Louder.
* There Must Be Option To Remove Themes Via Application Manager.
* Warning Tones Must Be Fast. Warning Tones Heard After 2 sec Of The Notification.
* Loudness Option Should Work As It Is Not Working In The Current Firmware.
* The Phone Restart Automatically, This Bug Should Be Fixed.
* There Must Be 25-30 mb free Ram Available as In The Current Version Only 18 mb Free Ram Is Available.
* MAps Should Be There In New Firmware.
I am Sure That Nokia Will Consider These Things While Releasing The New Firmare For Nokia 5700.
I thank U All!
Nokia 5530 Xpress Music RM-504
v30.0.009
31-5-10

* Music Player SHould HAve Exit Button [It takes 2mb Ram When Run In Background].i think this will come with a firmware update, cause n73 get it also later by an update
* There Must An Application To Run Phone In Landscape Mode.
http://www.bysamir.fr/rotateme/
* Music Player Should Be Paused While There Is NAy Incomming Call.i agree if it isnt that whay. doenst use the mp3player on my n73
* Camera Quality Should Be More Better.maybe there will be an update like on n73, but the pictures i saw were really noisy
* Camera Zoom Should Be 10X or More.it is digital zoom so 10x digital zoom would be like you take a 160x120 cutting of your 2mp-picture (1600x1200) and resize it to 1600x120 - i hope you understand that it is not the same like if you take a 1600x1200 native picture without resizing. that's digital zoom...
* When Create ANy New Folder In Images Folder Through Gallery and Move All Images To Newly Create Folder Then Only One Image Moved To That Folder. This Bug Should Be Fixed.use fexplorer or x-plore or Y-Browser or activefile as file browser
* Radio Sound Must Be More Louder.so it is the same issue like phone/mp3 loudness. phone has to be louder at all.
* There Must Be Option To Remove Themes Via Application Manager.build-in themes cannot be removed
* Warning Tones Must Be Fast. Warning Tones Heard After 2 sec Of The Notification.you see a notification (for example "battery low") and the sound is 2 seconds late? curious...
* The Phone Restart Automatically, This Bug Should Be Fixed.also if you dont use the phone? or are you doing something specific?
* There Must Be 25-30 mb free Ram Available as In The Current Version Only 18 mb Free Ram Is Available.buy a e90... n95 isnt better in that point and n73 isnt too. i dont think they can reduce the ram-using of the symbian-os too free ram for third party apps
* MAps Should Be There In New Firmware.you can download it!?! why it should be in the firmware? if there is someone who doesnt use or need it, it is wasted memory for him if it is build-in
V21.0.025 » 04-09-2007 » RM-356 5800 XpressMusic » Language pack 01

1xev were i should have 3 g

Similar Messages

Maybe you are looking for