2.0 gave us more storage space?

I noticed that before 2.0 upgrade I had only 500MB of storage left in my 7.1 capacity.
After 2.0... I now have 1.9 GB free with same number of photos and music, contacs ,etc.
It seems they compressed the firmware in such way to allow us to add those apps.
Anyone noticed that too?

I think I got less... And now it says I can't put all my stuff on there because it requires almost 5GB. This doesn't seem right. Pretty much the only thing that won't sync is sudoku unlimited, and I know that's not 5GB.... I'll probably restore it to fix this later, if the iPhone update is running smoothly again....

Similar Messages

  • Short dump - No more storage space available for extending an internal tabl

    Hi All,
    I have requirement in which my program generates a text file on my presentation server. Here my problem is, this requirement can not be executed in back ground, it should be done in foreground only. When I execute in foreground, if the data records comes to some 38 lacks then I am getting a short dump saying 'No more storage space available for extending an internal table'.
    And in dump analysis under WHAT HAPPENED section it is giving as
    ' What happened?                                                                                |
    |    You attempted to extend an internal table, but the required space was                         |
    |    not available.
    Please suggest me, what I have to do in this case?
    Thanks in advance.
    Thanks,
    Sudha Mettu

    Hi SuDash,
    Allocation of the memory spaces will be done by BASIS people.
    you can contact them..
    Regards!

  • Short dump -No more storage space available for extending an internal table

    Hi All,
    While running one program I get the short dump saying
    "No more storage space available for extending an internal table "IT_862".
    Error Analysis given in the dump log :
    The internal table "IT_862" could not be enlarged further.
    To extend the internal table, 14656 bytes of storage space was
    needed, but none was available. At this point, the table "IT_862" has
    8528862 entries.
    Source Code Extract :
    003360     loop at t_line.
    003370       clear t_output.
    003380
    003390   *   Increment Line counter
    003400       add 1 to l_line_cnt.
    003410
    003420       t_output-object = t_stxh-tdobject.
    003430       t_output-id     = t_stxh-tdid.
    003440       t_output-spras  = t_stxh-tdspras.
    003450       t_output-name   = t_stxh-tdname.
    003460       t_output-line   = l_line_cnt.
    003470       t_output-format = t_line-tdformat.
    003480       t_output-text   = t_line-tdline.
         *>       append toutput.   " ERROR POINT*
    Can you please suggest what can be the possible solution for the above error.
    Thanks in advance.
    Sanjeet

    Hi
    Check out this thread:
    Re: No storage space available for extending the internal table
    Make sure you are not having an infinite loop.
    Hope this helps
    Regards,
    Jayanthi.K

  • How do i add more storage space on my macbook air ?

    HI, I HAVE 121 GB OF STORAGE ON MY MACBOOK AIR VERSION 10.9.2. IT KEEPS COMING UP THAT I DONT HAVE ENOUGH SPACE ON MY LAPTOP. HOW DO I GET MORE STORAGE SPACE SO THAT THIS PROBLEM DOESNT OCCUR?

    backup your static media huge files, pics , vids, audio to an external HD.
    http://support.apple.com/kb/ht1427

  • Error-No more storage space available for extending an internal table.

    Hi Experts,
                    i am facing problem in a program . its showing runtime error.
    Short text
        No more storage space available for extending an internal table.
    its showing error at   
    IF sy-subrc NE 0.
            REFRESH p_wip_tab.
          ELSE.
            i_wip_tab-pspnr = i_internal_and_external-pspnr_prps.
            LOOP AT p_wip_tab.
              MOVE-CORRESPONDING p_wip_tab TO i_wip_tab.
    ==> APPEND i_wip_tab.
            ENDLOOP.
          ENDIF.
    DATA: l_billable_tab LIKE p_billable_tab OCCURS 0 WITH HEADER LINE,
          p_wip_tab      LIKE zpswip OCCURS 0 WITH HEADER LINE.
    DATA: BEGIN OF i_wip_tab OCCURS 0,
            pspnr              LIKE prps-pspnr.
            INCLUDE STRUCTURE zpswip.
    DATA:   pernr_name         LIKE pa0002-vorna,
          END OF i_wip_tab.
    How i can resolve this problem if anybody knows it then please reply me as soon as possible.
    Thanks

    Hello.
    Probably you fill the internal table with too much data and it cannot hold that much.
    You can either redesign the program so that it processes the data in batches of, say 100000 records, or contact your BASIS team and ask for their help. They could possible assign more memory to the running applications.
    Reward if helpful.
    Regards,
    George

  • TSV_TNEW_PAGE_ALLOC_FAILED -  No more storage space available for extending

    Hi
    Im SAP-BW Consultant. I need some code in the transfer rules. But while im loading data , im getting "No more storage space available for extending an internal table.
    Pls check my code and modify it so that i can load the data of 5,000,00 records
    TYPES: BEGIN OF tys_TG_1,
                         /BIC/ZIUTILICH           TYPE /BIC/OIZIUTILICH,
                       /BIC/ZIRGRCH           TYPE  /BIC/OIZIRGRCH,
                       /BIC/ZPRODUCT           TYPE /BIC/OIZPRODUCT,
    END   OF tys_TG_1.
    TYPES:  tyt_TG_1        TYPE STANDARD TABLE OF tys_TG_1
                                                     WITH NON-UNIQUE DEFAULT KEY.
    data: e_s_result type tys_TG_1.
    data: e_t_result type tyt_TG_1.
    DATA : ITAB1 TYPE STANDARD TABLE OF  /BIC/AZDSO_HYD00.
    DATA : WA_ITAB TYPE /BIC/AZDSO_HYD00.
    loop at RESULT_PACKAGE into e_s_result.
         Select /BIC/ZIUTILICH /BIC/ZIRGRCH /BIC/ZPRODUCT                                               FROM       /BIC/AZDSO_HYD00 INTO
                                    (e_s_result-/BIC/ZIUTILICH,
                                    e_s_result-/BIC/ZIRGRCH,
                                     e_s_result-/BIC/ZPRODUCT)
                                 WHERE
                                 COMP_CODE = e_s_result-COMP_CODE AND
                                 PROFIT_CTR = e_s_result-PROFIT_CTR .
              append e_s_result to e_t_result.
         endselect.
             clear e_s_result.
    ENDLOOP.
    refresh RESULT_PACKAGE.
    move e_t_result[] to RESULT_PACKAGE[].
    So im getting TSV_TNEW_PAGE_ALLOC_FAILED -  No more storage space available for extending an internal table..
    I think there is a problem in the code. pls look it and modify it.
    Regards
    kumar

    Hello Kumar,
    The amount of data you can store in an internal table is limited by the width of the table together with the available memory on your machine. If you try to put too much data in your table you'll always get that problem.
    As I see it you have a table RESULT_PACKAGE with some fields and based on the entries in that table you select one row out of another table.
    You can easily use
    Select
    /BIC/ZIUTILICH /BIC/ZIRGRCH
    /BIC/ZPRODUCT FROM
    /BIC/AZDSO_HYD00
    INTO TABLE e_t_result
    FOR ALL ENTRIES in RESULT_PACKAGE
    COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
    PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
    That still doesn't solve your memory problem hence you should try to process the data in packages, because you obviously don't have enough memory to process all data at once.
    You can add the following:
    Select
    /BIC/ZIUTILICH /BIC/ZIRGRCH
    /BIC/ZPRODUCT FROM
    /BIC/AZDSO_HYD00
    INTO TABLE e_t_result
    PACKAGE SIZE xxxx
    FOR ALL ENTRIES in RESULT_PACKAGE
    COMP_CODE = RESULT_PACKAGE-COMP_CODE AND
    PROFIT_CTR = RESULT_PACKAGE-PROFIT_CTR .
    PROCESS your data here
    ENDSELECT.
    You might also want to discuss the issue with your basis team if there is a way to get more memory if there is no way to do that process.
    Hope that helps,
    Michael

  • "more storage space needed" prompt won't go away.  Can't power off iPad to do so either.  Suggestions?

    The "Need more storage space" prompt came up, and has options to close or go to settings.  It's frozen, but active.  Neither option works.  Stuck on screen and can't do anything else, beyond activate suri.  Suggestions?

    Welcome to the Apple Support Communities
    Hold Sleep and Home buttons until the iPad restarts, so you will be able to use it again

  • How to create more storage space without deleting apps

    I need more storage space for my iphone 5s. I dont  want to delete my apps. any ideas?

    Hi pacificmission,
    Welcome to Apple Support Communities. 
    This article should give you ideas about how to free up storage space on your iPhone 5s by showing you how to view storage space usage and remove less used content.
    See how much storage you've used on your iPhone, iPad, and iPod touch - Apple Support
    Cheers,
    -Jason

  • I have been tying to buy more storage space and for no reason I can't get it

    I have been tying to buy more storage space and for no reason I can't get it

    I hae been trying going through all the steps to do so, but at the end, I can't get the purchase.

  • HT4910 I can not back up my iPhone.  it says I need more storage space.  I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up.  Any ideas?

    I can not back up my iPhone.  It says I need more storage space.  I purchased more space and icloud says it is there, but the phone is not recognizing this and continues to say that I need to purchase more space in order to back it up.  Any ideas?

    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • F.05 : No more storage space is available for extending  an internal table

    Hi,
    While executing F.05(FCV), I am getting ABAP Run time Error which is as below
    Short Text: No more storage space is available for extending  an internal table
    Pls, Give me solution and get more points. It is very urgent
    Thanks in advance
    Akash

    call your sap basis guys
    i don't need any points

  • Getting Dump "No more storage space available for extending an internal table" ??

    Hi All,
    In Web Ui while i was click save, it taking too much of time for saving at all lost it throwing dump such as "No more storage space available for extending an internal table". Recently Basis side did some activities for storing day to day transaction in back up server, after this activities i am getting this problem. i opening that Bsp component it throwing some information message such as component not integrated, i didn't see that message properly but i clicked continue button. After that basis activity only i got that information message once.
    i dont know what is the issue. Can anyone give solution for this issue
    Thanks,
    Anbu

    Ask your basis guys to clean up the system memory. This is happening because no memory is left.
    ~Kavindra

  • Dump --  No more storage space available for extending an internal table

    In Our system we are getting this dump
    No more storage space available for extending an internal table
    and because of it no user is able to login into the system.
    We have Some classes in the system and we have defined shared memories to all classes according to regions.
    So for a particular class means users of a region are not able to logon to systems and we are getting these dumps in the system.
    So please suggest first how to clear the shared memory & how to conclude what activity in system made the shared memory full.
    Regards,
    Shivam Mittal

    My OS is HP-UNIX..
    And we do not access on OS level,So please suggest the way to clear it from SAP level.
    In dump it is also mentioned:
    The internal table "\AREA=<Name>\INSTANCE=$DEFAULT_INSTANCE$\VER
    SID=2\OBJ={O:1.2*\CLASS=<CLASS>\DATA=GT_BUFFER[1]-DATA" could
      not be further extended. To enable
    error handling, the table had to be delete before this log was written.
    As a result, the table is displayed further down or, if you branch to
    the ABAP Debugger, with 0 rows.
    At the time of the termination, the following data was determined for
    the relevant internal table:
    Memory location: "\AREA=<Name>\INST=$DEFAULT_INSTANCE$\CLNT=100"
    Row width: 156
    Number of rows: 0
    Allocated rows: 63
    Newly requested rows: 1216 (in 19 blocks)
    Please also suggest what is the internel table name that is causing the issue.
    Regards,
    Shivam Mittal

  • BW..No more storage space available for extending an internal Table

    Hi;
    In function module - RSAR_TRFC_DATA_RECEIVED
    During Data loading from ERP to BW client am getting an error  in SM58 in ERP as ""No more storage space available for extending an internal Table "".
    There is a dump in BW system   TSV_TNEW_PAGE_ALLOC_FAILED
    "".I checked all the parameters for roll area,paging , etc..everything is fine. Also tried with  packet size smaller ..still i am getting this error ..
    Thanks & regards
    seethy

    hi thanks for the response....
    Memory parameters are fine
         em/initial_size_MB               2048     EM/TOTAL_SIZE_MB               21679     em/global_area_MB               256     Ztta/roll_area                       6500000     
         ztta/roll_first               1     
         ztta/roll_extension                  2000000000          
         rdisp/ROLL_MAXFS               32768     
         rdisp/PG_MAXFS               32768     
         rdisp/ROLL_SHM               16384     
         rdisp/PG_SHM               16384
         abap/heap_area_dia          2000000000     
         abap/heap_area_nondia      2000000000     
         abap/heap_area_total          4000000000
    i have checked with Less data selection. still error occurs     
    regards
    seethy

  • HT204053 I just purchased more storage space(10gb) for   iPAD, but when I attempted to download an app An error message appeared prompting me to buy more storage. according to my ICloud  I have 15gb available. Does anyone have any suggestions

    I purchased more storage space(10gb)for my IPAD,but when I attempted to download an app an error message prompted me to purchase more storage.According to my ICloud I have 15gbavailable Any suggestions Help!!!

    If you are trying to download an app and get an error about not enough memory, it's talking about memory on your iPad, not in iCloud.  I don't know what you mean by purchasing more storage space for your iPad, you can't add more memory to a device.  You may have bought more memory in iCloud, but that's not going to fix your current problem.  You need to delete songs or video, or some other large files from your iPad to make room for a new download.

Maybe you are looking for

  • The pdf security is not working in Flash Paper

    Is anyone facing a similar problem. The pdf security if applied with a passsword to select the text & graphics, printing, etc does not work. It selects any and every text in flash paper and pdf. Does anyone know how can one prevent to copy any text o

  • Attachments in web services

    hi all, I posted my msg last week , i like to post it again because its not solved.thanks. I am runing the example for attachment "http://dev2dev.bea.com/managed_content/direct/webservice/swaParam.zip" & i am getting this error, saying its wrong no.

  • OIM - docs for Java APIs and methods, where are they?

    Hello all, I am having trouble finding the documentation for the various Java methods. I believe that with 9.0.3 there should be something available, but I can not find it. thanks in advance Kam

  • Calling standard program

    Dear Experts, I have writen a Z program which converts the format of the output file, i need to execute the standard program rfebck00  after execution is completed i need the final output values back in my Z program for further process.. I tried with

  • Pre-value for variable

    I have a variable which data type is c(15), and which store the vendor code. It could be 4 digital, 5 digital and so on. I would like to concateneate zero and vendor code, but the vendor code is variants, the mechanism should be 15 - vendor code leng