2.2 is slower - for certain types of processing

So far the only major complaint I have with 2.2 is that it's slower for certain things. Scrolling through pictures in the camera app is slower. With 2.1 the pictures would show up immediately even when scrolling through them very fast. Also the grid view would load much faster, now i see a blank gray picture for 3-5 seconds before the actual photo loads. Scrolling through my contact list and app list is slower and choppy. Before it was fast and smooth.
Has anyone else noticed these types of issues? Could the amount of processes running in the background cause the "jitter" during processor intensive usage? With 2.1 I had the bare minimum running in background - maybe 2 - 4 processes and never had any issues. Now, I've disabled ATK - which seemed to help battery life, because of the wonderful programs that auto-restart themselves (such as Amazon MP3, footprints, skype, VZ Navigator, FM Radio, etc...), and have 10-20 processes at most times.

w40d1n1 wrote:
I believe that the froyo sluggishness, of the browser (pgup/down while the browser is still loading images), image viewer, and contacts, is due to the new "keep everything running in memory, and we'll sort it all out (by consuming more cpu) when the resources get low and froyo has to start killing/swapping apps to make room for the current app you are using" theory.;-)
actually it requires less CPU power to do it the Android way. It requires more processes force closing apps then then openning up what you want. Once a application is in memory it has 0 processes unless you are using it. If it uses a process then it is collecting data, or doing something you want it to do.
Everytime someone say Task Killers are needed still can't differenciate between process and application under the terms of Linux. I really do find it funny though. You NEVER hear people stating you need a Task Killer for OSX, Ubuntu, Fedora, or <insert linux variant here>, but always recommend it for Android eventhough it is a Linux Variant itself.

Similar Messages

Info./links for service type PO process

Could anyone who has a links or useful references (other than the help.sap stuff) on the process and config. steps for service type POs please provide them.
Thanks,
Nick

Hi,
The below link may explain the process.
http://sapmm.wordpress.com/category/service-master/
Regards,

HT2523 How do I add shadow to the title of a document while in Pages? For instance: NEW YEAR'S NEEDS. I'm also at a loss to know how to create a folder for certain types of documents such as "Sermons" or "Lessons."

How do I add shadow to a title, such as, NEW YEAR'S NEEDS, while in Pages? I also don't know how to set a new folder for documents of the same type such as, "Sermons," or "Lessons." Any help will be greatly appreciated.
Donnie

Yes, I very well may be over thinking this, but I tried duplicating and moving it, but the text distorts slightly, which can be mostly remedied by rotating it on the x-axis, although the light is still off. And the shadows and reflections are not visible - this is pic1... In pic2, I used "rotate 3d object" with the green and red arrows, instead of just sliding it up the y-axis using the coordinates in the scene tab. Using the green and red arrows to move the text preserved the reflections but the shadows now aren't visible. It was also hard to align the text perfectly in scenario 2. Thanks for the help

Executable jars are running slow for certain features

A weird problem occured one day. I started running my old jar -packed application. It took more than a minute to load the main window. Also updating file browser window is really slow when I browse from a folder to another. I also tested running other jar applications and they have similar problems. Everything works but certain task are extremely slow.
I reinstalled jre1.6.0_07 but it did not help. Then I uninstalled all jdk's and jre's and installed jdk1.6.0_07 which came with jre1.6.0_07. No result. Do you have any idea where the problem is or what I could try next?

Problem solved.
It was the mingw that I installed as full installation. Full installation came with a java compiler, which made some specific java features really slow.
Another problem was uninstalling it in a way that would have restored java as it was. I tried uninstalling mingw, manually removing mingw folder, cleared environment variables, removed and reinstalled all java etc. Finally, I just reinstalled everything beginning from OS on my computer

SRM 7.0 Process Controlled Workflow-Level Type in Process level config

Hello Experts,
In SRM 7.0 for Process controlled workflow,for Level Type in Process Level configuration we have 3 different options
1) Approval with Completion
2) Approval
3) Automatic(System User)
Can you plz explain what is the difference between these 3 diffrent potion for Level Type in Process Level configuration.
Your help will be highly appreciated,
Thanks & Regards,
RKS

1. Approval with completion : This allows approvers to make any changes to document while approving. Generally you define this type for buyer in SC approval.
2. Approval : above minus change
3. Automatic (system approval) : If no process level is determined, you need to set up a process level with automatic approval to approve the document by system.

How to block one of the purchasing document types for certain period

My client asked me to block the one of the purchase order documents for certain period.In what way i can do it? and also it shouldn't be displayed in the purchase documents list when we do me21n?
Advanced thanks,
Sateesh

Hi Sateesh,
Here u cann't block the Document type,
U can do this,only the way to delete that document type for certain peroid.
Thanks & Regards
Suresh
> My client asked me to block the one of the purchase
> order documents for certain period.In what way i can
> do it? and also it shouldn't be displayed in the
> purchase documents list when we do me21n?
>
> Advanced thanks,
> Sateesh

[CS5 Win] Switching to InDesign is slow in CS5 for certain documents. XML links?

Hi,
I put this question in the scripting part, since you might be the ones to notice such things as this, and it might relate to importing XML by scripting. Also I got no positive response in one of the other forums, "complaining" about the sluggish performance redrawing the interface when setting focus to InDesign CS5. But now I can more clearly see that it is not slow for all documents.
Having certain documents open in InDesign CS5 makes it very slow to switch to. The CPU peaks at 80-100% and it takes about a second or two until InDesign responds.
The documents do not necessarily need to be large in size, but it appears that it mostly occurrs on documents that I've imported data to (or that our customers have), using our own code, which takes care of an XML file and portions it out into templates.
One strange thing I just noticed was that selecting "relink all" by alt-clicking the relink button in the Links palette, makes InDesign look for (presumalbly) previously imported XML files. How can that be?
I never store any links to the imported XML - as far as I know. Where should I look for that kind of links?
How and why would previously imported XML file paths be stored? I just import the XML into the structure, "deal with it", and deletes the node that it was imported to. (The data is left in a structure that I build up myself.)
Does anyone know if there is a change related to any of the facts stated above, in InDesign CS5?
I'll attach a screen shot of the links dialogue (above), when it "looks for" an XML file. Could this kind of "missing file" cause the abovementioned "slowness" every time switching to InDesign from another application?
(InDesign documents that don't relate to XML doesn't make switching to InDesign slow - but it gets slow when such a document is loaded, even under a tab that is not in focus.)
Best regards,
Andreas

I've uploaded a video to demonstrate that InDesign sometimes can keep references to links:
http://www.youtube.com/watch?v=OoQOSIlfYl4
It's obvious that there are thousands of "orphans" in the documents. All XML files ever imported are kept in some way... The links (or the names of them) are obviously not removed from the document when deleting the Element in the XML Structure. Since the communication of the code with a database is built around XML import, the number of imported files is very large.
Can these orphaned link references somehow be removed? When manually checking for missing files, InDesign loops though all of the XML files as seen in the YouTube video above, but ends up saying that there are no missing files. The next time I do the same check, all links are looped through again.
Perhaps we should "link to file", using .xmlImportPreferences.createLinkToXML = true
This propery has not been explicitly set, and therfore = false. But is there any way to get rid of all the old link names that's inside the document somehow?
CS4 does the same thing, but there is "no 2 second lag time" switching from another application to InDesign CS4 with this kind of document open.

Where can I get a list of available selection for certain dict type?

Where can I get a list of available selection for certain dict type in code? For instance, when I use SE16 to view VBFA table, I am presented with many filter criteria. One of them would be "VBTYP_N". When I click on the square next to the option, I am presented with a list of possible values to select from. Where can I get the list of this possible values for any given dict type in code?

Hi Frank,
The list of possible selection you see can be from diferent sources
1) Search helps defined either programatically or search helps defined at table level.
If it is a Z Selection screen check the program, then the data declaration of the parameter
2)Check tables provided at field level. They can be through use of foreign keys. The proposal generated could be simple compund ..
3) Fixed values at Domain level ()
Please refer to this link as well for detailed explanation
[http://help.sap.com/saphelp_470/helpdata/en/9f/dbaa5435c111d1829f0000e829fbfe/content.htm]

Hide values for certain condition types in Quotation Saleorder and Invoice

Hi All,
I have written code to hide values for certain condition types in LV69AFZZ,
this works fine in the ITEM LEVEL.
But for the same condition types, I could not hide the values in the HEADER LEVEL.
Unless I hide it at header level also, this is useless.
Please guide me how to do it.
Thanks & Regards
Pradeep

Hi,
We have been using FORM USEREXIT_FIELD_MODIFICATION of LV69AFZz for item level & FORM USEREXIT_FIELD_MODIFIC_KOPF of LV69AFZZ for hiding heade level conditions.
I hope this helps,
Regards
Raju chiutale.

Maintaining the purchase requisition field mandetory for certain PO Doc typ

Hi,
I have tried to maintain the purchase requistion field in PO as mandetory field for certain PO docuemnt types and for transaction code ME21N.
I copied the standard fields setting NBF to ZBF and assigned the same to PO docuemnt types as well and in the reference data, item i mainatained purchase requisition as mandetory field . But observed that Purchase requisition field is still not mandetory. Then for ME21N in the reference data, item i mainatained purchase requisition as mandetory field .
Still it is not appear as mandetory field in po.
Please guide how to achieve this , is any customization i am missing.
Best Regards
MM

HI
1) In transactiono OMET create Function Authorisation as Z1" there flag "Reference to Purchase Requisition".. then assign the "Z1" in txn. SU01 for parameter id EFB..and it wil make the user to create PO with reference to PO.
2) At screen layout level :
SPRO>MM>Purchasing>PO>Defince screen layout at screen level...
Select ME21N details and select "Reference data Item" flag required indicator for Purchase Requsition..
Regards,
BK

Can't set plugins (like Quicktime, to be run in FF) for certain file types

When I go to the application tab in options, I don't have the option to select a plugin for certain files - I'm trying to get Quicktime to open mp3s in Firefox, I know it can, it use to do that on my old computer, but Firefox doesn't give me the option - I see it listed for other files, but it doesn't appear for this one.
== This happened ==
Every time Firefox opened

Still more data. iTunes on the Vista machine will still not allow me to change the location of the iTunes Folder with the Browse button. It acts like the network doesn't exist.
But, surprisingly, if I go to File-Add File to Library, the network appears! Even stranger, File-Add Folder to Library, the network does NOT appear.
Again, the network is clearly operationaly, and iTunes can even see the network in the Add File menu, but refuses to see it in the Advanced menu or Add Folder.
It's not that Apple doesn't want me to be able to do this, because all of my XP machines running 7.6 do this flawlessly. There is clearly some bug between 7.6 and Vista.
Rummaging around the forums convinces me that this is a pretty common problem, but I haven't found an answer yet.
Thanks for any help,
Shawn M.

How to stop Accounting Entries for certain Movement Types

Hello,
We are using Movement Type 511 to record free of charge receipts from vendors. Still it is generating Accounting Entries with Standard Material Price.
Is there any way to stop Accounting Entries for 511 and other Movement Types, where external business partners are involved ?
I tried IMG Setting "Define Account Grouping for Movement Types", where I did not tick in the field "Value Updates". But it did not work.
I believe, Account Grouping settings at the level of combination of Plant and Material Type takes precedence. There I have ticked in the field "Value Updates". So even if create a new Movement Type, with no tick in the field "Value Updates", it creates Accounting Entries for free of charge receipts from vendors.
Is there any way to stop any accounting entries in such cases ?
Basically I want 311-like movement type, but where external business partners are involved.
Thanks and Regards

Hello,
Thanks to you all for your quick reply.
I created a new Movement Type - copied it from 511 and made the changes as per your suggestions - disabled field "Value Update" in "Update Control / WM Movement Types".
Using MIGO when I try to receive the material, it gives me error "Update Control of Movement Type is Incorrect"
Any reason for this error ? I have disabled even "Check Account Assignment" in Account Grouping
Thanks and Regards

Playback stuttering with certain types of animations

We are experiencing heavy stuttering or jerking attempting to play back certain types of animations. The problem persists with several codecs, regardless of pixel size or compression, both in the Quicktime player and within applications that rely upon quicktime for playback, such as Adobe After Effects 7. We have tested rendering out directly into quicktime format with different compressions, and rendering out many types of image sequences. The problem has occurred on both a G5 Dual 2 gig with 3.5 gb of ram (running quicktime 7.1.6), and an octocore with 4 gb of ram (running quicktime 7.1.3). Both machines are running OSX 10.4.9 system software. Another employee here made a DVD of this animation, compressing using apple products and using DVD Studio pro, and the jerkiness translated onto the DVD.
The jerkiness is completely random, always occurring in a different place, and not tied in any specific way to the motion. When viewed frame by frame the animation is completely smooth. The animation involves panning across a flat, large bitmapped image, so no frame rate or interlacing issues are involved. There is a lot of contrasting detail in the image, so a lot of information is being conveyed pixel to pixel. The stuttering has that look as if the hard drive is too slow, but as the problem persists even with 480x270 highly compressed quicktimes (i.e. sorenson) under 5 mb, hard drive speed should not be an issue.
Other quicktimes, that don't involve panning, seem to play fine.
There is no audio tied to these files.
The problem also persisted in Maya's FCheck application, which makes me unsure if it's quicktime, but for all I know FCheck also utilizes quicktime resources to work.
The video cards involved are the GE Force FX 5200 (G5) and the Quadro Effects 4500 (Octocore).
This problem is severe for us as we are unable to see what our designs actually look like, and we are at wits end trying to solve it. Not to mention how clients feel looking at jerky previews and their comfort level with that. Delivery is approaching an no solution is in site. Any help would be appreciated.

You jest that someone would share with us the file in question. Shame and 100 noodle lashes for asking. I will get out the ouija board and 8-ball and try to make my own assumptions lacking any evidence at all.

A realistic assessment of your experiences of hardware needed for the type of editing I do please.

Introduction:
I apologise for the length of this post but from experience of reading here, I'm working on the principle of the more I explain about myself now, the less anyone willing to help me will have to ask later.
I have lurked around this forum on and off for a few years, read the various threads in the FAQ section, particularly PPBM5 and What PC to build thread and other related topics around what system to build. I have found them very useful and in particular have enjoyed reading about Harm Millaard's experiences First Ideas for a new system. For about about 12 months I've been delaying upgrading my PC but in Mr Millard's latest updates on his PPBM6 site he talks about new systems and provides a link to Intel's time line which suggests they are in no rush to replace the i739xx series CPU chip - which has I believe amongst other things 2 cores disabled. Normally bitter experience has taught me not to rush out and buy the latest technology but let others "test" it first and then benefit from reduced prices as that model is replaced. However, it now seems like last years technology is going to remain as this years technology and probably the first 2 quarters at least of next year and, if anything, the price of the i739xx series is at best staying at it's existing launch price or even rising. So it's time to take the plunge for me and upgrade.
My current hardware for editing:
I started with Premier 6.5 after I bought it as part of a bundle with a Matrox RTX 10 card - one of the most temperamental pieces of hardware I've had the misfortune to work with. I later upgraded to Premiere Pro 1.5 and edited with that using a Pentium 4 2.6 (overclocked to 3.2), 3 hard drives (no raid) and 4G of memory. The video footage used was avi recorded using a Canon MVX 30i and Panasonic NVGS27 and now I've added the Casio Exilim EX -FC100 (mpeg format) and a Panasonic HDC S90 (AVCHD).
My PC coped with the editing I did with avi footage but couldn't handle AVCHD format and this convinced me to upgrade to Premiere Pro CS5.5. At the same time I switched to editing on a Dell XPS M1530 (Centrino duo chip) - I upped the memory to 4GB, put Windows 7 64 bit home edition on and replaced the existing hard drive with a faster one. In addition I use a SATA Quickport duo attached to my laptop via an eSATA card. However, either the Quickport, eSATA card or XPS is extremely temperamental - I never see two external hard drives, 50% of the time see 1 external drive or none at all - when that happens I edit around it doing things I can with just the one internal drive - but this problem is not my question.
The type of editing i do:
I know people usually say around here not to try editing on laptops and believe me, I understand why, but using this setup I have been able to edit lots of videos - see here for examples of the type of editing I currently do:
http://www.youtube.com/user/PathfinderPro
The equipment test videos place the biggest strain on the hardware when editing. And, to do this editing I have to convert my AVCHD footage in to it's YouTube format before editing and even after I've done that it can be tediously slow to edit and playback even with premiere set to play at 1/4 normal quality. To convert the AVCHD footage to the YouTube format I edit in has to be done over many nights.
Now I am not a professional, I typically edit with up to 4 tracks of video with additional tracks for titles and my target audience is YouTube - which is why I can get away without editing in my prefered option of native AVCHD video format. However, I'm tired of all the waiting, stuttering, and many many days and hours of converting videos into a format I can use so I'm looking to upgrade. My problem is though I'm uncertain what path to take. The PPBM results are dominated by overclocked chips, and whilst the motherboard make and model is listed, the hard disks used, graphic card makes and models and memory modules are not. This is not a criticism of the PPMB tables (big thank you to Bill Gehrke & Harm Millaard for taking the time and effort to pull this much information together) but for me, I am not interested in being in the top 1000 in the world, nor overclocking like mad, and having had horror experiences of using matrox products and compatibility and stability issues with other hardware I'm more interested in compatability and practicality than speed when deciding what to build. I've also read the threads about marvel controllers, dual and quad channel memory support, the pro's and cons of SSD or standard drives, raid setups, the heat problems with overclocking the newer ivy bridge chips and general build advice etc so I'm not coming here without having done some reading first.
The type of system I'm thinking of:
So far based on what I've read here, I've come to the conclusion - but I'm open to suggestion:
- Chip - regrettably due to the cost and unlikely successor anytime soon - a 39xx (with appropriate cooler) because I want to edit in native AVCHD which seems to require the warrior type chip as opposed to the "economical" build regardless of what my target audience is and this suggests
- X79 motherboard (which must have an old PCI slot such as the Asus Sabertooth and which has room for the cooler I'm considering). As I will be carrying over my old terretec DMX 6 fire 24/96 soundcard - all my videos have their audio mastered in Audition using this card - best piece of advice I read was the audience will watch a bad video with good sound editing but not the other way round)
- 4 hard drives plus additional hard drive for operating system using onboard raid controllers (not sure whether the operating system drive will be WD caviar black or SSD and can't justify cost of external raid controller for either my type of use or number of hard drives being used)
- Video card - I can now buy a GTX 580 for less than the 670 - so not sure on the card especially based on Harm Millards observations that memory bandwith seems to be as important as CUDA cores
- Case - I have an Akasa 62 case with room for 5 hard drives - I won't be exceeding that, and if I overclock it will only be by a little so is it really necessary to replace it for a Tower Case - although I would prefer a case with a front connection for esata so I may have to change the case regardless
- Maximum memory 32G - so is it necessary to upgrade to windows 7 professional?
- Power source - I'll work out when I've decided on my components.
Help please:
For me it's video source/dictated software chosen and hardware/audience(youtube) dictates format edited in. As I don't intend to change my camcorders format (AVCHD or mpeg) in the next couple of years and I'm not interested in having the "fastest" system around what I'm really interested in learning is:
what system setups people use now for doing similar editing to me
what make/models of the component parts in your system work well together
and if you do have a bottle neck in terms of hardware, where is it and what hardware would you change to (not a dream model change, just a practical and realistic one)
I have deliberately not given a budget for the changes I'm intending because budget should not be the deciding factor in determining what I "need" to upgrade to for the "type of editing I do" - especially bearing in mind I've got by so far (admitedly at a tortoise pace) with by todays standards a standard spec laptop. Basically I don't want a Rolls Royce to go shopping at Wallmart but I'm tired of walking there and carrying everything back by hand!
Thank you very much for any help / experiences people can share.

Thank you both for your prompt and helpful replies.
Mr Millaard, regarding your excellent article Planning and Building an NLE system, I have read it a couple of times now and it was your article which finally convinced me the time was now to upgrade but within it you said for good reason "Initial choice of CPU: i7-39xx with the intention to overclock to 4.6 - 4.8 GHz", hence my uncertainty about the CPU to use. I have seen a video you posted here - I think it was based on your cats (which I incidently enjoyed) so working on the editing done there (but not remembering if you mentioned what video format you used) and others who have mentioned many pro's for the i7-39xx I was leaning towards that - but I'm financially relieved at least - if the i3770 will do, although now with the possible recommendation by JEShort01 (sorry not sure of the forum etiquette for use of names) of the 2600K overclocked I'm a little bit back in the position of which is more suitable especially with the update to the i3770 being nearer than i7-39xx. This still makes me lean towards the i7-39xx.
Regarding the editing, the match play you can see on the channel is indeed 1 camera basic edits - multiple titles used to provide the score board. However, the coaching videos use mulitple cameras - 3 to 4 sometimes (another reason for upgrading to CS5.5 for the multi cam editing support) and the equipment testing video can use 3 or 4 tracks layered on top of each other other with each track having opacity settings and multiple motion effects and titles with occasional keying video effects added. For example this video at approx 2 mins 50 and 5 mins 10 seconds.
http://www.youtube.com/watch?v=T1E5T7xo57c&list=PL577F7AB5E31FC5E9&index=13&feature=plpp_v ideo
Monitor wise I use dual monitor setup. My laptop screen and I link out to an LG M2394 D for widescreen and I sometimes use an old Neovo F-419 for 3 / 4 editing. I won't be using more monitors than 2. If the 580 drops a bit more I'll probably go for that - although I'll have to make sure it's size isn't an issue for the motherboard combo setup. Interestingly there is a thread shown on the forum home page which discusses the 570 vs the 660ti and the opinion was go with the 660ti which surprised me a bit.
Windows 7 professional it is then - I should have known that too - apologises for asking a question already asked.
"Accepted, your correct criticism of the lacking hardware info on the PPBM5 website. That is the overriding reason that for the new site http://ppbm7.com/ we want to use Piriform Speccy .xml results to gather more, more accurate and more detailed hardware info."
No criticism intended Mr Millaard - more an observation and I really look forward to that evolution with PPBM7. I'm assuming the .xml results will use pre populated drop down lists people can select their hardware from - that way you can control and ensure consistent entries - downside being the work required by you to populate the lists in the first place and maintain them.
Thanks again for your help but I'm still unsure a bit about the CPU and video card though.

Adobe Photoshop CS6 Very Slow On Rendering Type

I have a notebook with specification as mentioned below :
Lenovo Ideapad Y470P
2nd generation Intel Core i7-2670QM Processor( 2.2GHz 1333MHz 6MB)
Windows 7 Ultimate x64
AMD Radeon HD 7690 2GB
8.0GB PC3-10600 DDR3 SDRAM 1333 MHz
750GB 5400
I'm using Adobe Photoshop CS6 (64 Bit) for doing my job.
Right now, i have a task to create a banner with dimension 800 x 900 Centimeters with Resolution 300 DPI and Color Mode RGB 16 Bit.
The file size when blank is about 56.1 GB.
The problem is, when i add some text with Horizontal Type Tool and click on the Move Tool, the Rendering Type screen show up and take a very very long time to finished.
I have made some configurations to my Photoshop that i found on Adobe Forum, but the problem still persisted.
Some configurations that i've made is :
- Turn off the Automatically Save Recovery Information
- Set Maximize PSD and PSB File Compatibility to Ask
- Set the Memory Usage to 95%
- Set the Cache Levels to 8 and Cache Tile Size to 1024K
- Set the Graphics Advanced Settings to Drawing Mode Advanced, and Check the option Use Graphics Processor To Accelerate Computation, and Uncheck the option Anti-Alias and 30 Bit Display
- Set the Scratch Disk to another partition ( C:System D:PageFile E:Data F:Scratch Disk)
And after all of that configuration, my Photoshop still slow when Rendering Type.
Could you give me some tips to solve my problem?
Thanks

300 ppi for a banner that size is categorically not normal. Guaranteed.
Get specific instructions from the shop that is going to print it.
You keep confusing ppi with dpi. The resolution of an image file really is expressed in ppi, pixels per inch, not "dpi" which is dots per inch. The precise terminology is as follows:
DPI = Dots per inch = units used to measure the resolution of a printer
LPI = Lines per inch = The offset printing 'lines' or dots per inch in a halftone or line screen.
PPI = Pixels per inch = the number of pixels per inch in screen/scanner file terms.
Here's a link to a discussion that may interest you:
http://graphicdesign.stackexchange.com/questions/487/what-ppi-should-a-large-format-artwor k-for-print-be-done-at
It includes the following chart and subsequent comments :
"The rule of thumb is that we need 1.5 to 2 times the LPI in PPI to get acceptable results.
"Viewing Distance   Present Study
20 feet    greater than 10 LPI
18 feet    18.75 LPI or greater
16 feet    18.75 LPI or greater
14 feet    37.5 LPI or greater
12 feet    37.5 LPI or greater
10 feet    50 LPI or greater
8 feet     65 LPI or greater
6 feet     85 LPI or greater
4 feet     100 LPI or greater
2 feet     133 LPI or greater
1 foot     150 LPI or greater
6 inches   150 LPI or greater
"Presumably, for a banner 3m x 5m, you'd be standing at a minimum of, say, 10 feet. (Just eyeballing the wall here.) So, by this table, you'll need 50 LPI minimum. That would mean your raster graphics should be about 100 PPI, or 75 PPI at 12-14 feet. Considering that and the fact that 2x LPI is pretty conservative for reproducing fidelity (often 1.5xLPI is "enough"), this agrees with [the given] advice of 75 PPI being acceptable."
Talk to your printer. I suspect they will want a file at under 75 ppi, or even much less. Follow the printer's advice/request.

2.2 is slower - for certain types of processing

Similar Messages

Maybe you are looking for