2/3rds of all versions are displayed totally corrupted

Bizarre time.
I may need to reinstall Aperture (just ran a rebuild to no effect). Here's what's happening:
- When I first open a library, the versions are displayed correctly. After reviewing a few versions, the histogram goes moves to the right like a rolling wave and the image gets blown out.
- Close and re-open and the same.
- Open a different library and again the versions look OK, but after a few mins., these corrupt also.
- The RAW master images display fine despite the version being blown out
- The version levels histogram remains consistent with a valid image despite the topmost histogram being pushed to the right.
Anyone else seen something/anything like this? Only just put 10.5.5 up so maybe ....
PMG5 Quad w/ATI x1900G5 and OS X 10.5.5
G

Hi Don,
Yes its 10.5.5 and graphics card combo. I'm not sure it is levels as I tweak almost all of them but you may well be on to something.
I blew Aperture away (completely down to items in System/Library) and reinstalled from 2.0 with 2.1.1 update. No joy.
I copied the library and ref. master images to a MBPro and a MBAir, both running 10.5.5 and Ap 2.1.1 ..... all OK. So my next task is to remove the ATI graphics card and reinstall the boat anchor nVidia 6600.

Similar Messages

Not all users are displayed for log on after a reboot or startup...

Problem summary: Not all users are displayed for log on after a reboot or startup...
This problem only occurs after a fresh start-up or restart. The only users displayed are the initial (admin user) and "Guest". Two other (non-admin) users are not shown for log on.
To work around this problem and get them to log on we have to log on as the admin user, then we can see the other users in the Fast User Switching menu (top right-hand corner of the screen), listed under the current logged on user. After selecting the non-admin user we can log in and use the laptop as normal.
If we lock the screen, use fast user switching or log out all users; all users are available for log in, until a reboot is done; at which point the non-admin users disappear again and we have to log in as the admin user and use fast user switching again.
The laptops are both brand new MacBook Airs. The initial configuration of Mac OS X Yosemite was done using the Apple ID of the purchaser (parent) and then the OS was patched, immediately, through the App store (no further updates available as of the date of this posting). After this Family Sharing was activated and new users set up for the two children who will be using these laptops.
Has anybody else experienced this problem with Yosemite?
Cheers,
David.

David,
Users not enabled for FileVault unlock are only able to log into the computer after an unlock-enabled user has started or unlocked the drive. Once unlocked, the drive remains unlocked and available to all users, until the computer is restarted.
FileVault has to be On.
To Enable the users to be able to unlock FileVault Go to:
System Preferences > Security & Privacy > FileVault ( Tab ) > Click the Lock in the bottom left > Put in your administrator password > Should see an option to Enable Users > Enable User.
Hope that helps,
Weston
Supporting Articles,
OS X: About FileVault 2 - Apple Support

Tabs and Pages::: All tabs are displayed at once

Hi, In my application I have around 100+ pages and grouped together based on specific category. I have a one level tab page as default, and I have grouped the tabs based on the category.
I displayed the tabs when contained in a comma separated page numbers. Then I wanted put these pages in a table and display the tabs when a specific page is selected.
Ex:
pages :1,2,3,4,5 :
Group 1
for display: I used pl/sql return boolean with the following function==== return pagetabs(v('APP_PAGE_ID'))
create or replace function pagetabs (vpageid in number) return boolean is
begin
for crec in select a.pagenum from auditor_pages a, auditor_pages b where b.pagenum=vpageid and a.pagegroup=b.pagegroup
loop
if crec.pagenum = vpageid then
return TRUE;
end if;
end loop;
return False;
end pagetabs;
The problem:
I have all the tabs displayed all the time. My idea is to get the tabs related to that page depending on the category. Can some one suggest a better method or tell me what is the mistake in this process

If it works in Safe Mode and in normal mode with all extensions (Firefox/Tools > Add-ons > Extensions) disabled then try to find which extension is causing it by enabling one extension at a time until the problem reappears.
Close and restart Firefox after each change via "Firefox > Exit" (Windows: Firefox/File > Exit; Mac: Firefox > Quit Firefox; Linux: Firefox/File > Quit)
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
In Firefox Safe mode these changes are effective:
*all extensions are disabled (about:addons)
*default theme is used (no persona)
*userChrome.css and userContent.css are ignored (chrome folder in profile folder)
*default toolbar layout is used
*JavaScript JIT compilers are disabled
*hardware acceleration is disabled (Options > Advanced > General)
*plugins are not affected
*preferences are not affected

Not All Fields are Displayed in RSA3 for a Generic Extractor ??

Hi all,
 I have a created a Generic Extarctor based on a View and enhanced the Extract Structure with 3 ZZ Fields. Now it has 26 fields with width of 273. In RSA3, I could see inly 12 fields with width of 147 only.
 No field has checked as HIDE in DataSource.
 I have checked Settings --> Layout --> Current, there are NO columns in Hidden Fields box which is on right side. All fields are there in left side box under Line 1.
 I could see all the fields in ROOSFIELD table for this DataSource.
When I copy it into Spreadsheet from RSA3, I could see all the fields with data including ZZ fields (Appended Fields).
 What is the problem and how could I fix it, PLEASE ?
 Thanks in advance.
Regards,
Venkat,
Message was edited by:
 Venkat Kodi

Hi Venkat
sorry for late response.
Anyway did you solve your issue.
Forget about the icon now and check again in ROOSFIELD table and check if the missing field for selection has any parameter value. If so (shoudl be a P value ) then maintain it and put a blank value save the changes.
this should solve your issue.
hope this could help you
regards
Boujema

Microsoft Service Pack 2 - not all versions are equal; how to update to the latest one "safe

I posted this under another topic where it was relevant, but thought the instructions I got from Microsoft were useful (as was my experience in using them as I sent back a reply to them with the problems I encountered [none of which were particularly bad]):
One important point to note is that not all Windows XP SP2 upgrades are equal.
I had a different issue and spoke to Microsoft, who advised me to uninstall the version of SP2 I had and reinstall the newest version (the old version was about 70mb, the new one nearly 250mb).
Apparently the old SP2 had quite a few problems with it; I've found the new one to be "simply stress free" since installing...
The SP2 file name I installed (ie the newest at the time I did it) was "windowsxp-kb835935-sp2-enu".
Here's their instructions - I disagree with the way round that they suggested downloading the update (ie I would strongly advise downloading the update and having it sitting on your desktop before doing anything!!! - please see my feedback email to them that follows (you will note that I had problems connecting to the internet after uninstalling the earlier version; this, combined with the fact that I could barely read what was on the screen would have given me a major inconvenience had I not done this)!!! (and don't blame me if it goes horribly wrong - it's also worth double-checking that the version of SP2 the email links to is the most up to date. I've had a quick check myself, and it does indeed appear to still be the most up to date):
MICROSOFT'S EMAIL (make sure you also read my reply below):
MESSAGE:****************************************** ****************************This is an email from Microsoft about your support incident.When replying to this address: + It helps us if you do not include the original message + Please keep the case number (SRxxxx) in the subject lineThank youMicrosoft Product Support Services ******************* The message from Microsoft follows ****************Hi Gregory,Firstly uninstall SP2 by going to Start>Control Panel>Add/Remove Programs and then reinstall it in a clean boot.. Click Start >> Run >> In the run dialog box type msconfig and then click ok 2. Put a dot in selecti've startup 3. Uncheck all of the check boxes that become available except Process System.ini file and Load system services 4. Go to the Services tab along the top, click Hide all Microsoft Services 5. Then disable any remaining services 6. Click apply and then close 7. Finally select yes, this will start in a clean boot. 8. Then go to (http://www.microsoft.com/downloads/d...DisplayLang=en) and download and install Service Pack 29. To return your PC to normal, open the System Configuration Utility, click "Normal Startup", click OK and restart. Then restart your computer and try accessing updates againPlease let me know the results of these methods, particularly if there were any steps that you were unable to complete successfully.
MY REPLY:
HiI successfully carried out the installation on Saturday.A few minor problems ensued (the second one may have cause a novice user real problems! Certainly caused me some concern whilst working through it!). I had to reinstall ATI drivers from scratch (for Radeon 9800 Pro); this was however the only set of drivers that appeared to "detach" itself. The main problem here was that instead of using the usual standard VGA driver (which it does when I uninstall it once a month to install updated drivers), it used some other driver that made the screen very difficult to see (especially on blue backgrounds!). Running ATI's total uninstall program sorted this out however, and fortunately I had the last update package from ATI still on my system. After uninstalling and reinstalling there appeared to be no further video problems.2. After installing SP2 (and before installing above), whilst I was in the process of getting everything up and running (eg installing the security updates) the system randomly froze about 4 or 5 times; the only way to sort this out was to use the power button. I traced this problem to Windows changing my wireless networking settings so that it handled everything; I have a Netgear adaptor the software for which usually controls this (Netgear Smart Wizard). Basically the two were trying to do the same task and causing crashes; on switching Windows management off, things settled down (the Netgear driver did not need to be reinstalled).3. As a minor point, after the upgrade and installing all other updates, I noted that Microsoft Update was no longer running; I had to reinstall it from Windows Update and the messages I got whilst installing suggested that it was still partially installed but that there were problems with it. It now works.4. As a final minor point, I attach the Scan log from Registry Mechanic which I ran after everything was up and running; it fixed various problems within the registry. I note that the majority of errors are inconsequential, but note that a few do relate to the various Microsoft installs; maybe the installer program for SP2/ Media Player 0 need to sort these out in future releases? Don't think they're a real problem though!The instructions supplied worked fine; one thing I would suggest is that users are instructed to download the SP2 upgrade pack to their desktop prior to uninstalling the original SP2; I believe that my internet connection problems started after I had uninstalled the original SP2 which may have caused problems downloading the new SP2. It also ensures that the download is successful (eg if the site was down for maintenance); I was advised whilst uninstalling SP2 that about 20 programs/drivers would not work properly after the uninstall and so the immediate reinstall was vital!One thing that seemed to fix after reinstalling was a problem I was having installing Media Player 0; after installing it previously, every time I checked for updates on it the whole program would reinstall. Now however this has fixed. I will let you know if I encounter any further problems, but things all seem to be fine now, touch wood.....!
Hope this helps!Message Edited by gjc26 on 0-27-2006 02:50 AM

One small thing - I believe the reason why some of my drivers were messing up was because they were SP2 specific; the older drivers and the ones that were compatible with both SP and 2 were fine.
As soon as I did the reinstall, all of the drivers/programs that were not working, worked (aside from the ones that I mentioned in my attached email above).
So, if after uninstalling the old SP2 you are told that loads of drivers/programs will not work, fear not - most should fix themselves upon installing the new SP2.
G

The contents of my emails are not showing when I open in my usual Firefox. However, if I open in explorer all contents are displayed. I prefer Firefox and don't want to switch back to Explorer. Can you please help me with this situation?

I have always been able to open my emails and access their contents using Firefox. Now, this morning, I can no longer access the contents of my emails, but can still open them.
I called 'virginmedia' who told me to try using Explorer, which worked, and they told me the problem was with Firefox.

Sugestion: Upgrade Firefox to the latest stable version => www.getfirefox.com
There are many problems with webmail (especially gmail) lately. It can be caused by the AdBlock extension. If you have it installed here's what to do:
1. "Ctrl+Shift+F" Preferences (or right click on ADP symbol and choose preferences)
2. 'Filters' menu > "Update all subscriptions"
Solution from https://support.mozilla.com/pl/questions/896267 by [https://support.mozilla.com/pl/user/52 dmcritchie]

Not all rows are displayed in OBIEE answers

Hi,
When I include a dimension column(PRODUCT) along with my fact column(SALES AMT), I am getting only one PRODUCT row displayed.
If I select just the PRODUCT column without any FACT column, I am getting the list of all PRODUCT(25 rows).
I used the query generated by OBIEE, and ran it in my database and I am getting all product listing and the sales amount. (25 rows).
I am assuming my problem is in my RPD. But where in my RPD should I look to debug this issue?
Thank you.
Edited by: ssk1974 on Jan 11, 2011 1:09 PM

This is probably correct behavior - you probably only have one product existing in your fact table? If you want to see all the lists of products along with $0 for the facts, you'd have to do an outer join between the dimension and the fact.
Of course, if your fact table does have other products in, then there's some other problem - maybe dim joined to fact on wrong column name or something.
Hope this helps,
Scott

Not all Amounts are displayed in the Query

I have an issue with my query, I am getting '*' for some of the amounts and for the other amounts it is displaying the correct value.
Can you please help me out with this issue.

This link should give you more information...
Currency Conversions

Attachments sent through Mail in iOS (any version) are received as corrupt.

Hello! If I send any attachment through Mail in iOS (can be iPads and iPhones, multiple versions) with my Exchange account, these attachments will arrive to their destination corrupt (as in, they cannot be opened). I've got Exchange 2007 in my company. I know that this is not an iOS problem or Mail problem, since if I send the same exact attachments via another service, say Gmail for example, it arrives correctly to the sender.
I have not done anything to the Exchange server so far, I just wanted to know if there's someone that can lead us in the correct direction.
At first I thought the problem was with iOS since is started around the day we upgraded to iOS 7.1. We've upgraded to the newer 7.1.1 version of iOS but this has not resulted in a correction of the problem.
Any thoughts or ideas?
- James.

This is not an iPhone problem or an iOS problem as you seem to be aware.
As for troubleshooting the attachment corruption problem, I'd think your best resource would be Microsoft.

All web page display with lines, text are stretched and not legible

all pages are displayed with stretched text, and pictures are also not loaded properly when scroll up and down.
== This happened ==
Every time Firefox opened
== Last update to 3.6.3

I am having similar problems. Ebay was not displaying correctly until I closed down the browser and restarted. Other websites had the same problem. In Facebook, many links are not working.

DMS : All Versions Vs Current Version

Hello,
Thsi doubt is pertaining to DMS
I have a Document which i have attached to service Notification--Object link
Document Number: 500000
Doc Type: Z36
Doc part : 000
Doc Version: 01
Later I created another version 02 by copying the Version 01 with the same object link..
both 01,02 are under released state
My doubt:
In service notifcation both the 2 versions of documents are appearing while selecting the tab "ALL VERSIONS" for list of documents.
But when i select the Current version Tab no Version of documents are displayed.but while selecting all versions every versions are displayed.
I have to show the customer the current version of the document.
How this is possible??help me out
regards,
Murali.S
points will be awarded for sure.

Hi Murali,
This can be controlled in the "DC10" select your document type "Z36" go to "Define Object Links" select the Objects and go to detail screen of that
you see "Document Version" field which has two options "0" & "1" you need to select "1" (Defaulting Current Version).
Sometimes still this problem persists then Ask your ABAP expert to change (tick) in the background i.e. in t-table, he will find it by debugging it.
Regards
Rehman

In send mail body of text all commas r displayed as Dots and all dots as co

Hi Experts,
I am sending sales order details in mail but when it reaches the users outlook mail box all
commas are displayed as dots and all dots are displayed as commas.
Work flow body
Sales Order No : &BUS2032.SALESDOCUMENT&
Customer No : &BUS2032.ORDERINGPARTY.CUSTOMERNO&
Sales Organization : &BUS2032.DISTRIBUTIONCHAIN.SALESORGANIZATION&
Sales Division : &BUS2032.SALESANDDISTRIBAREA.DIVISION&
Total Credit Limit : &CREDITLIMIT&
Available Credit Limit : &AVL_CREDITLIMIT&
Present Order Value : &BUS2032.NETVALUE&
Mail body Display
Credit Limit exceeded By 22.221.456.873,75-
Sales Order No : 262
Customer No : 300000
Sales Organization : 1000
Sales Division : 10
Total Credit Limit : 12.000.000,00
Available Credit Limit : 765.286,25
Present Order Value : 22.222.222.160,00
Please tell me how to resolve this issue.
Regards,
Hari

Hi,
this is the "Defaults" settings of the user.
Go to SU3 and in the "Defaults" tab, choose your choice.
Hope this solves your issue
venu

Production ABAP program Versions are not in sequence

Hi,
I have the program for eg :YXCA_R229_DEMAND in development system with 1 to 4 versions all versions are moved to QA and PRD in sequence.
If we compare the DEV and QA we can see all 1 to 4 versions in sequence.But in PRD we can see only latest version(4) for that program.
How to get the all versions sequence in PRD.Is there anything need to activate or any notes need to apply,pls let me know that will be great.
Thanks,
Vijay

Hi Guys,
After changing the TP profile version issue has been solved.
To create these versions, go to the Transport Management System and set
the profile parameter VERS_AT_IMP to ALWAYS (the default is NEVER ).
Further information can you taken from sap help.
http://help.sap.com/saphelp_nw70ehp1/helpdata/de/57/38e0fb4eb711d182bf0000e829fbfe/frameset.htm
Thanks,
Vijay

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"?

All photos in portrait format are displayed blurred in the preview mode "fill" of the library. In all other modes e.g. "fit"or "1:2" the photos are sharp. How can I change this, so that the photos are still sharp when displaying them in the mode "fill"? My Lightroom release is 5.7.1.
Thanking you in anticipation!

I'd like to get all these '-1 suffix' files together with their associated Develop adjustments into one folder (if they aren't already) so I can see them in Grid view in the Library module, which I use as my basic starting point for everything else at this early stage of my Lightroom 'career'.
To see what folder these are stored in, right-click on a photo and select "Go to Folder in Library".
Advice: if you are going to use Lightroom effectively, you probably want to stop using folders as your method to create a grouping of photos that are already in Lightroom; there are plenty of built-in tools, such as keywords, collections, color labels, etc.
I don't understand why the search on the entire catalog picked up apparently the same two file versions but also got the Develop adjustments when going to the relevant Folder didn't show the adjustment black squares against each image in Grid view nor were they there when the images were opened in the Develop module. Perhaps if I understood this, I'd be a bit more confident of moving forward myself.
These are most likely different versions of the same photo, in different folders. Lightroom stores the edits in its own catalog, and so it knows that one folder's photos have edits, and the other folder's photos do not have edits. Please understand that Lightroom is a database, it knows where the photos are at the time you import them (or add them to the catalog by synchronize), and then if you move things around in your operating system, Lightroom does not know anything about that and problems begin. Thus the advice to organize using Lightroom tools and methods and not operating system tools and methods.

All my RAWs are suddenly totally bright

Strange things are going on in my Aperture. Today I imported some photos I took yesterday evening, and after the import, they were totally bright.
Look here: http://img507.imageshack.us/img507/3091/bild1at9.png
But this is only Aperture, that displays them like this. When i locate them on my harddisk and open them with Preview or Photoshop everything is all right.
Tried already to reinstall Aperture (including a new .plist an a new photo-library) … but this did not help.
It seems, that Aperture imports them correctly and then, after the import – perhaps half a second later – it applies this „white-effect“.
My other images are displayed right in the previews, but when i open them, the same „white-effect“ is applied.
It does not affect jpeg-images.
I guess, that some framework got an error, but I don't have a clue which one and how to repair it. Any ideas???
THANKS!
MacBook Mac OS X (10.4.10)

A ways back I had to hack RAW.plist to provide support for a legacy point n shoot. I used the wrong camera as the source for my hack and got similar results to your issue. I suspect that since your jpg's are OK that an OS update broke your RAW.plist file
G.

2/3rds of all versions are displayed totally corrupted

Similar Messages

Maybe you are looking for