2 Devices in Fatal1ty

Hey,
is it anyhow possible to connect 2 devices to sound card? (only fatalty pro) I mean repro + headset

You need to take a look at the list of supported devices and the minimum software required.
Please refer to the document 'Supported Devices for Campus Manager 3.2' at the URL http://www.cisco.com/en/US/products/sw/cscowork/ps563/products_device_support_table09186a008007fb59.html.
Do also look at the document 'Release Notes for Campus Manager 3.2 on Windows 2000' under the section known problems. This document can be found at:
http://www.cisco.com/en/US/products/sw/cscowork/ps563/prod_release_note09186a00800adb1a.html#xtocid5
Hope this helps.

Similar Messages

Fatal1ty MKII Headset Playback Device Trouble

Hi,
I've recently purchased a set of Fatal1ty MKII Gaming Headphones (with the pink and green jack). I'm using Realtek HD integrated sound on W7 x64.
I'm having trouble separating the sound of the headphones from the desktop speakers. Mic works fine.
I can't seem to get the headphones to appear as an individual playback device in Sound manager. ( Only have speakers) For example, everything I hear through my desktop speakers I hear through my headset. In vent, I can't select output device to just be the headset.
So is there some way I can individually select headphones for vent etc and not have all my sounds coming through the headphones?
Cheers.

I found something else out , the MIC is recoginized at startup when i have the problem , but not the headphones .

X-fi fatal1ty device not detected when running speaker selection wizard

Gx-fi fatalty device not detected when running speaker selection wizard? ?
System is a custom build, based off an ASUS A8N-SLI Premium, with two GTX7800 display cards. in a SLI configuration
Fresh installation fo Windows XP Profesional with SP3 slipstreamed.
Origional CD fails to detect the card, claiming a supported device is not present.
This card has worked prevously, and is verified as fully functional in windows Vista. ?
Please note Windows Vista can not be used.
I have tried about 30 different versions of the drivers (each on a clean installation) and used both clean and dirty boots, and nothing is working.
Before anyone points me at other threads in this forum, please note i have been scouring this forum for the past week trying every sugestion there is, and I have raised a ticket with Creative (who despite the prommise of a 2 day responce, have yet to respond)
I have tired multiple versions of the NForce drivers, NVidia display drivers, Creative Drivers, Bios updates, Chipset hacks and more.
does anyone hav a sugestion that is not already posted on this forum.

Tried it on one of the spare PC's in the house earlier (Nforce 2 based) - still no recognition of the card whatsoever, it's as if it doesn't exist.
I'm guessing that the card is pretty much toasted eh?
--Jakk

Fatal1ty headest mk II problems

i finnaly got to get my new headest to work without static in the backround by plugging the headest into the green jack labeled "front" in the back of my computer. i want to change some of the settings in the creative control panel but when ever i open it it says " the audio device supported by this application is not deceted. the application will now exit". it also does this with the console launcher saying " there are no supported audio device avalible. you need to close the application. click OK to close now. can someone please help? i have a X-Fi XtremeGamer Fatal1ty Pro Series sound card.

ok i got the control panel to work by reinstalling the sound drivers. but whenever i change anything in the control panel it has no effect on anything. why couldn't creative just make a usb version? all of these problems probably wouldn't of happened. even the old fatal1ty usb headest is sounding better than this one and i never had problems with it like whatever change i made in the control panel made a difference. i'm thinking about getting my money back.

Need help getting Fatal1ty Pro Series Gaming Headset Mic to work

greetings.
i am using a Fatal1ty Pro Series Gaming Headset Mic along with an Audigy 2 ZS Notebook card, and i cannot for the life of me get my laptop to recognize audio coming from the mic. the mic switch on the cord is on, and the status light is lit up, and i can even hear my voice from the mic in the headphones, but the audio is not being inputted into the computer. i'm using winxp pro and have played around with all the audio settings in control panel with no luck. any suggestions? i thank you in advance for your time and consideration. take care.
regards,
jps

Headsets or microphones with a USB connection cannot be connected to the input connections on a sound card directly. Instead, they must be connected to a USB port on a PC.
They are treated as a separate audio device by Windows. They will be listed as a separate audio device in Device Manager as well as in Windows Multimedia panel. To adjust the volume of the headset or the microphone, use Windows Volume Control.

USB Fatal1ty (ef0210) general questions

Just a couple of (most likely) noob questions here. First off, the USB Fatal1ty gaming headset (ef0210)... Does this headset give true 5.1 channel sound or just "simulated surround?" I mean does it have four speakers in each headphone cup like the analog version of the Fatal1ty? Or am I going to get "surround" out of a pair of stereo speakers?
Now, time for opinions.
Secondly, if it is true surround, 4 speakers per cup and all, which would you suggest? Would you suggest the USB Fatal1ty (same model as mentioned above), or the analog version with the multiple jacks, and the X-Fi USB 5.1 surround card.
I found that the virtual surround just doesn't cut it anymore with my games. If you have any other suggestions for a true 5.1 setup through USB means (I am using a laptop and have no PCMCIA, so a "real" soundcard isn't an option) that is close to the prices of either of these sets, please let me know as well. Thanks in advance.

1. Address Book > Menu > Filters. UNcheck all filters.
Do you see any of your contacts now?
2.You can disable the clock from the Options > Clock settings.
3. Correct, always eight characters with a combo of numbers/letters or a rare occassion of all numbers
4. a. On your homescreen, press the Menu key > SHOW ALL, so that SHOW ALL is checked.
b. Look in EACH folder on your device... Applications, Instant Messengers, Downloads, etc.
If you still don't see it, look at Options > Advanced > Applications. Do you see it listed there?
5. Try plugging the USB cable to a REAR usb port, not a USB hub or port.
Reboot your computer.
Are you certain you INSTALLED BlackBerry Desktop Manager after you downloaded it?
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

ALWAYS NOISE from my guitar with SB ExtremeGamer + Front Panel (Fatal1ty I/O Drive)

No clue where to start from – anyway here goes – i got win7 64-bit and latest SB drivers (Beta after trying the older ones).
When i connect my guitar to my front Line 2/Mic 2 there is a LOT of hiss, wizz, and stuff - i tried from the line in (sound card from the back and mic) same result - i am trying to use some guitar effects, studio software.
I will lay all the steps I did to try to get a sound or GOOD sound from both Amplitube 3 and Guitar Rig 4 ; I was able to get the sound a BIT fair from amplitube Fender ONCE (I also tried Hendrix, AMpeg,Metal,X-gear) – that was when I connected to Line2/Mic2 Front Creative panel – other than that I can NEVER EVER GET A SOUND from those software. Any help would really be appreciated.
In a nutshell I have Sound Blaster X-FI Fatal1ty (ExtremeGamer XFi Pro Edition) with the front Fatal1ty I/O Drive that has all sorts of inputs (Digital + analog):
I beg you guys help me; I was thinking of purchasing stuff like the below if my SB won't work
• Behringer USB Audio Interfaces
• M-Audio USB Audio Interfaces
• Line 6 USB Audio Interfaces
• Even considered this chinese product: http://www.ebay.com/itm/ASIO-USB-Interf ... 3a63ff5158
I just wanna jam on my pc – don’t want to use my Digitech GSP 2101 limited edition nor my Korg PX5D in my bedroom – just gonna plug my ESP Horizon or my Fender Strat and have fun.
Please help me out in either fixing this crap or just point me to a good (better cheap) solution to finish from all the fizz, hiss,biss,wissss, tsss, etc… lol that comes out of all those apps
BTW I also installed Asio4All (also used Creative Asio and the DIRECT sound) and tried ALL the inputs outputs possible; 44.1k and 48k sampling (also tried that); messed around with control panel sounds (Playback / Recording), with Sound blaster own console and control panel.
I am sooo tired of it I just wanna blow up my whole PC
Tx a lot for any help that comes my way.
KicKer

Again another test i did: (BTW it is only left channel that is working or how does it go since u have wndows record left/right; Mix FL/FR/RL/RR/FC/LFE/RC or SL/RC or SR
using CREATIVE Asio (to use my front panel line 2/mic 2 connection) i tried:
1. Windows record left
2. windows record right
there is sound but bypassed from AT or GR (Clean sound)
now when i change only left channel to: Mix FL/FR/RL/RR/FC input is MAXED and nise is crazy even without connecting anything
finally choosing:
LFE
RC or SL
RC or SR
i get the clean BYPAssed sound (input signal is zero)
i set 00 MS and ms for Asio creative latency + tried 44 and 48 hz
Asio4all:
says not connected for all - when i go to its control panel and tick any WDM device list each one shows the yellow Unavailable/Beyond Logic mark
please please please help me

Computer not regonizing Fatal1ty Gaming Headset

I bought the USB Fatal1ty gaming headset. I plugged it in and the computer doesn't regonize it. Was this supposed to come with a CD with drivers? If so, mine didn't.
Where do I find drivers?
Anyone else had this issue.
Thanks.

Hi Marnad1963,
Can you try plugging the headset to another USB port? If you have multiple USB devices, please remove them to see if it helps.

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

Can I put more than one user under one Apple ID account. I want to let other family members use imessage on their own Apple device. Or is there another way to get this end result?

You can seach the net for solutions like this one http://appletvvpn.com/how-to-connect-apple-tv-2-to-vpn/ another idea is to use a PC as the control and fit that with a wireless card and set up a ad hoc wireless network that the Apple TV uses.

HP LaserJet Enterprise 500 color M551dn - Optional USB Device port

Hi, I'm hoping to buy the optional wireless print server (HP Jetdirect 2700w USB Wireless Print Server J8026A). There is one problem though, the optional USB device port seems to not exist on my printer. I only notice that the USB logo is present where the port is supposed to be. The plastic in the area is squared off as though it is some sort of break away tab and the port is underneath maybe.
There is no reference to this in the manual anywhere and I am really unsure how to proceed. I don't want to damage anything.
If someone experienced with this model (preferably an HP Employee) can confirm the availability of the port and tell me how to access it (Is it a break away tab?). Part of the reason why I bought this printer is the optional Wireless N print server.
Thank You in advance.

Thank You for your reply. The port you are talking about is the front panel port for walk-up usb printing and firmware upgrades. This port is indeed available on the higher end LaserJet 500 (NON-MFP, printer only edition) as I just used it to upgrade the firmware. The port I am talking about is the one on the left side in the ports section which you use to plug in the optional print server (not the computer I/O port).
This is shown in the official manual and the spec sheet so I'm 85% sure the port is there, hp can't advertise and mention something that is not available as this would be a big problem and make the 2700w print server incompatible when it clearly states that it is. I just need someone to confirm the availability and clear my confusion (either from HP, or another owner who bought the wireless print server 2700w).

USB Device for IPOD not recognized by Windows, whether ipod connected or no

During the past few days I have received a pop up error message from (I would think) Windows that the USB device is not recognized. I have the USB plug for the ipod connected (as always)but the ipod isn't even connected. It keeps popping up like every few seconds that the usb device is not recognized.
When I attach the ipod itself, the ipod is recognizing it because it powers up. But, it took 10 times just to get the ipod to recognize through itunes. It updated, then immediately upon completion, windows again starting giving repeated error messages that the usb device wasn't recognized.
I have downloaded the newest itunes but I had it on my system for 4 days with no problems whatsoever. I don't think that's it. No other system changes.
I've deleted my temp files and cache. Also did a "disk clean up" and "defrag." It's still doing it.
Any suggestions?

I'm having the same problem. Ever since I upgraded to version 7, iTunes & my PC no longer recognise my iPod, and it therefore won't sync.
It's not the USB port (other devices work in it), I rebooted my iPod and re-installed iTunes, I've tried stopping and starting the iPod Service (but can't see my iPod in My Computer). When I run the Diagnostics it says iPod connection failed. I've even bought a new USB cable but that doesn't work either.
This is driving me up the wall. Is there a glitch with iTunes 7?
Can anyone help me out?? Thanks
Windows XP

How do i share media (music and videos) between all of my devices?

i currently have (and attempt to use as much as possible) the following devices: macbook pro 15", ipad 4, iphone 6 plus 64 GB, and appletv 2.
i would love it if these devices would talk to each other correctly. first came the macbook, and i took an internal 2 tb drive cannibalized from my previous pc and transformed it into an external. that drive is desinated as my media drive, it includes all of my video and music. the macbook and the appletv talk to each other flawlessly. every music and video file on that drive is accesible to me using apple tv.
next up is the ipad, which includes some of my videos (movies), but no tv shows. music also does not show up, only options to buy from the store. but i already have a music library that includes many songs downloaded from the store that dont show up, only some stupid U2 album that i never downloaded.
finally, we get to the iphone, which i just got. i get no shared music or videos here at all.
by the way, all settings are set to share with each device in settings and itunes. each device talks to one another. i know this because there is some level of sharing on each device (ie ipad gets videos, iphone shares spreadsheets and other productivity files. appletv shares everything. i now want to sync these devices so that they can share the same data while on the same home network. i should be able to do this, right?
also, i know that i can airdrop/transfer but thats not really what im looking to do atm.
thanks
spencer c

im more than a little disappointed here. can anyone recommend another forum please?

"Cannot send email from this device"?

I recently purchased the Easy Release App from the ITunes store and when I try to email the release to my email address it says "Cannot send email from this device". Is it the app that is preventing the sending or is it something to do with the iPod? I've tried sending an email from the iPod to see and it is sent fine from the iPod but the app still won't send from the iPod.
Has this ever happened to someone else? Do I have to change settings on my iPod?
I have the IPod 4th generation if that helps

I had the same problem. You have to go into Settings in your ipod touch, scroll down and find "mail, contacts, calendars." Set up your email in there. It will give you a list I.e. yahoo, hotmail, gmail. After you've dont that you'll be able to sent the model release.

TS3989 My 5th gen ipod touch was stolen. I removed the device from my iTunes account, but their pictures still show up on the photostream on the one I purchased to replace it. How do I get this to stop, the cops have no interest in their faces, nor do I

My 5th gen iPod touh was stolen a month ago. I immediately removed that device from my account and yet today I looked at my photostream and there are tons of pics of these people on my photostream. How do I get this to stop?!?

Change your iCloud ID password: http://support.apple.com/kb/HT5624. After doing so, go to Settings>iCloud, tap Delete Account, then sign back in with the new password.

I have an apple iphone 4 that I want to download audio books from my library onto it. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

I have an apple iphone 4 that I want to download audio books from my library onto. I cannot figure out how to do that. The iphone does not show up on my mac laptop as a connected device. Does this kind of download have to run through itunes? Thanks

Yes it is done through iTunes. The iPhone will never show up in Finder as a device. The following is general information on iTunes sync: http://support.apple.com/kb/HT1386 and the following is a previous discussion where the post by Andreas Junge helped others that had a problem syncing audiobooks: https://discussions.apple.com/message/20052732#20052732

2 Devices in Fatal1ty

Similar Messages

Maybe you are looking for