2 Factor Authentication YouTube Uploads.

I have gone to Google and put iMovie in for two factor authentication.  When ever I close down iMovie I have to go back to Google revoke the old one and do it again.
So here is the question.
When I put the Authentication code in for Youtube after I create it in Google I am able to upload my video for it logs in.
When i open iMovie again at another time it says invalid or incorrect username and or password.
So let me make sure I am doing this right.
I get the Authentication code from Google.
I enter it into iMovie for Youtube uploads.
When I close the app and come back to iMovie and I to use my Youtube password or the Authenication code.

You've essentially got it right, but I think you're getting confused between the "authentication code" and the "application-specific password".  iMovie won't work with an authentication code, you need to create an "application-specific password" in your Google account, and use that in iMovie. (just to be clear, the "authentication code" is the four-digit code that you get in a text message or on your phone app, after you use your regular password. The "application-specific password" is a special password that completely bypassses 2-factor authentication - it's not as secure, but lets you continue using programs like iMovie that don't work with 2-factor authentication).
But the problem is that iMovie won't remember your password between restarts, and Google won't show you what the password is after that first time. There are two possible solutions:
Use "Keychain Access"  (or a program like 1Password) on your Mac to securely store your password, you can then retrieve it from Keychain Access and paste it into iMovie the next time you need it (if iMovie did remember your password, this is where it would be stored anyway. You'll find Keychain Access in your "Utilities" folder).
Every time you use iMovie, go into your Google Account and "revoke" the old iMovie password, then create a new one to use in iMovie.
If you go with my 1st suggestion, make sure you always use something like Keychain Access or 1Password to securely store your passwords. Never save it in a text or Word document or a "note taking" app, etc since those are not secure enough for passwords.

Similar Messages

  • Google 2 factor authentication and youtube sign in

    I recently enabled google's 2 factor authentication and now can't view my youtube content/subscriptions via apple tv, presumably because of this. The account password has remained the same.
    Is there a means to get around this?
    Thanks.
    (apple tv software is current)

    Unfortunately, I already tried this several times prior to posting here.  The system won't let me add the same account more than once, and continues to prompt me for a password multiple times for each service.

  • Two-factor authentication by using Digital Cert

    Dear Friends,
    I am trying to implement two-factor authentication on any connect vpn. While uploading identity certificate on the windows 2008 server ,getting below mentioned error
    Please help on this.
    Regards,
    Shinu Mathew

    Hi Lars,
    If you are using SMS PASSCODE, go to  http://www.smspasscode.com/support  and ask them to send you the setup guide or walk you through the configuration.
    Kind Regards
    Lars (@smspasscode).

  • Multi-factor Authentication?

    Multi-factor authentication will soon be mandatory for
    several of my applications. I need to know if CF has any built-in
    functionality, either stock or via custom tags, to handle any of
    the common multi-factor tools. How are other people handling this?
    :-)

    Huh, i'm sorry, I found the answer just after the questioning... :)
    Known Issues:
    * Windows Authentication for Terminal Services is still not supported for
    Windows Server 2012 R2From:https://pfweb.phonefactor.net/install/6.3.0.17465/release_notes.txt
    www.sccmfaq.ch

  • Apple ID - Two Factor Authentication (and why I stopped using it)

    The Apple devices I use every day consist of the following:
    2009 MacBook Pro 17" (home)
    iPhone 6 (home)
    2012 MacBook Pro Retina (work)
    My home devices are all logged in using my Apple ID as usual, and my work laptop uses a Apple ID specific to work, but with my personal Apple ID logged in for iMessage and FaceTime (pretty standard, I presume, for people with full-time work laptops they can bring home, etc.). Now, since I have multiple devices which are constantly syncing everything back and forth, whether it be something as simple as my contacts or as delicate and near and dear to my heart as my photo collection, I felt that maybe I should use two factor authentication for my home Apple ID, just to be on the safe side. I recognize that the two factor authentication only protects iMessage and FaceTime currently, but I implemented it with hopes that someday they will incorporate everything about iCloud and other services synced between Apple devices that you would assume should be covered by a two factor authentication update/overhaul.
    I liked this idea very much, as I use two factor for almost everything I can, but things started to fall apart one day when I had to switch to a temporary work laptop and decided to log in to iMessage with a new app specific password, as you would need to on a new device (unless you wrote down the original iMessage password, which is a terrible thing to do). When I went to create my new iMessage password for work laptop B, I decided to revoke work laptop A's iMessage password while it went in for repairs. This wasn't so bad until something seemed funny about my phone, as it was asking for me to log into iMessage again. Now, I had created a separate password for work laptop A's iMessage when I first logged in a while back, as well as a separate password for the temporary work laptop B so it didn't interfere with my other generated passwords. Apparently this didn't matter.
    I continued and created a new app password for my phone, but when I got home, wouldn't you know it, I had to log into iMessage on my home laptop again as well. I had to create a new password for that, which seemed to work for a while, but then I was prompted to enter my iMessage password on my phone again once I revoked my home laptop's iMessage password. Not following? No, me either. It seemed to me that creating separate app specific passwords for me to use across my devices didn't stay as separate as I thought they should, but instead they somehow seemed to be dependent on one another. Since I had a frustrating time trying to activate iMessage again on my iPhone and laptops on multiple occasions while this was happening, I decided to disable two factor authentication altogether.
    I suppose I should ask a question here, so here goes: has anyone else encountered this horrific two factor authentication/app specific password management issue for their own account? Have you been able to resolve it, and if so, any helpful suggestions? Thanks!

    I had also thought that initially, but after turning it on, I went to sign into iMessage with my Apple ID and regular Apple ID password, but it prompted me to create an app specific password to sign in since I had two factor authentication on, as it wouldn't let me use my regular Apple ID password to log in (which I could use to log in for everything else but iMessage and FaceTime). It was nice since I was prompted to provide a code sent to an Apple device of my choosing when signing into the Apple ID management site or iCloud.com, but forcing me to create app specific passwords for iMessage and FaceTime is kind of ridiculous and frustrating. Maybe there's a way to have two factor authentication without the need for app specific passwords? Or if not, then perhaps that would be a great option to present users when turning that feature on.

  • Is there a way to save a job action for YouTube upload in Compressor 3.5?

    Is there a way to save a job action for YouTube upload? I have about 25 - ten minute clips I want to upload and they all pretty much have the same description and tags. Is there a way to save/make a preset of the job actions that way I don't have to keep inputing the same usernames, passwords, descriptions, tags? Thank you

    the method mentioned by benwiggy will certainly work.  If you want to an option that would give you more options, you could use a PDF Service.  You could then put a specific job on hold while still allowing others to use the printer.
    You can do this by opening AppleScript Editor (/Applications/Utilities).  You can copy and paste the following into an editor window --
    on open printJobs
    tell application "Finder"
    set trapFile to quoted form of POSIX path of (printJobs as string)
    end tell
    set defaultPrinter to do shell script "lpstat -d | awk -F: '{print $2}'"
    do shell script "lpr -P" & defaultPrinter & " -q " & trapFile
    end open
    Save the file as an Application.  You can name it something like Hold Print Job.  Then just put it in the PDF Services directory in the Library directory of your Home folder <yourname>/Library/PDF Services.  You may need to make the PDF Services directory as it may not already be there.
    Once the file is in place, you can use it by using the PDF drop down menu at the bottom left of a print window.  That will send the file to the printer and put it on hold.  Others can still use the printer.  You can then print your file whenever you want.  Just open the print queue as mentioned by benwiggy.  Highlight the job that is Paused.  You will see a little curly icon at the very right (looks like a reload icon in a web browser).  Just click that icon and the job will start printing.

  • Two Factor Authentication on Windows Server 2008 R2

    We have a small 2008 R2 Active Directory environment with 2 domain controllers and 13 member servers. We have no additional features such as an RDP gateway or Federation Services - just a plain AD setup. We now have a requirement from our client to have
    a two factor authentication solution for each time we logon to any server, either using RDP or locally. We only have 4 admins that ever logon to these servers - we do not have any "regular" users.
    Is there anything out there that would work in this environment without having to modify our AD (at least nothing major)?
    Thanks

    Hi,
    You may consider smart card:
    Smart Card Overview
    http://technet.microsoft.com/en-us/library/hh831433.aspx
    Understanding Requirements for Connecting to a Remote Desktop Gateway Server
    http://technet.microsoft.com/en-us/library/cc770519.aspx
    Best Regards,
    Amy
    Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • Why is my YouTube upload not working in CC 2014.0.1?

    I understand that the MOOV Atom issue was supposed to be fixed in the new version of PPro/AME released yesterday.
    New to the issue? The MOOV (or Movie) Atom is a piece of metadata that belongs at the very top of a streaming MP4 file. In the previous iteration of PPro/AME, the YouTube upload was a two-pass VBR process and it put the MOOV atom at the END of the file; a third-party software, MP4 FastStart, was required to move the MOOV. Then, YouTube uploads went without a hitch.
    "Without a hitch" means: YouTube acknowledges your upload and delivers the URL at which the video will appear when finished.
    There is NO "Video/Audio Quality" warning! That warning, indicating that the video you're uploading is not a streaming video, is a sign of trouble.
    I upload a 1 1/2 minute file and it appears to work perfectly i.e. no warning messages.
    However, when I upload the full 2 hours 15 minutes, it warns. The warning is not without teeth: my first upload of my large video was still not ingested and processed by YouTube after 4 hours. It would display...but this lovely work that I had uploaded at 1080p was showing in 360p.
    An additional issue is that the bit rate (8Mbps in the older version) has been bumped up to 16, making for huge upload files (literally double). Even after cutting the bit rate back in half to 8, it warns; I didn't complete the upload but suspect it still would not display properly.
    I'm now uploading the work separately by act (1 hour 15 and 1 hour for the two acts, respectively). If that doesn't work, I will need to uninstall and carefully re-install the software, not allowing the update to install (I'm told by TS that this is possible), and then get my work done. I'd obviously rather not have to do that. I'll actually do the uploads to YouTube this time and see if they process fully, whether or not I get the "Audio/Video Quality" message in the beginning.
    If anyone has any ideas (other than pointing out to the engineers via bug report that they seem to have messed up) I'm eager to hear.
    Jay

    Hi,
    Please check this.
    please have a look into this :
    CALL FUNCTION 'GUI_UPLOAD'
    EXPORTING
    filename =
    FILETYPE = 'ASC'** HAS_FIELD_SEPARATOR = ' '
    HEADER_LENGTH = 0
    READ_BY_LINE = 'X'
    DAT_MODE = ' '
    CODEPAGE = ' '
    IGNORE_CERR = ABAP_TRUE
    REPLACEMENT = '#'
    CHECK_BOM = ' '
    VIRUS_SCAN_PROFILE =
    NO_AUTH_CHECK = ' '
    IMPORTING
    FILELENGTH =
    HEADER =
    tables
    data_tab =
    EXCEPTIONS
    FILE_OPEN_ERROR = 1
    FILE_READ_ERROR = 2
    NO_BATCH = 3
    GUI_REFUSE_FILETRANSFER = 4
    INVALID_TYPE = 5
    NO_AUTHORITY = 6
    UNKNOWN_ERROR = 7
    BAD_DATA_FORMAT = 8
    HEADER_NOT_ALLOWED = 9
    SEPARATOR_NOT_ALLOWED = 10
    HEADER_TOO_LONG = 11
    UNKNOWN_DP_ERROR = 12
    ACCESS_DENIED = 13
    DP_OUT_OF_MEMORY = 14
    DISK_FULL = 15
    DP_TIMEOUT = 16
    OTHERS = 17
    IF sy-subrc 0.
    MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    ENDIF.
    you have file type here , just give the type whether XLS or CSV format or whatever.

  • Having trouble with Google 2 factor authentication and Mac Calendar

    Hello!  I recently started using Google 2-factor authentication on my Google Apps (Pro) account, and have successfully configured my gmail settings in OS X Mail so that inbound/outbound work correctly.  Here's where the problem is:  OS X uses a single password in the system account settings for calendar/contacts/notes, etc, so enter the login/password once and check the boxes for what services you want to use. But Google sees these as distinctly different apps, so when I enter an app-specific password, it only registers for one (i.e.:  contacts), but not for another or the rest of them (like calendar).  Has anyone had experience in setting this up? How can you get app-specific passwords to work with the rest of the OS X system applications besides mail?
    Thank you!

    Unfortunately, I already tried this several times prior to posting here.  The system won't let me add the same account more than once, and continues to prompt me for a password multiple times for each service.

  • 2 Factor Authentication and MacBook Pro

    Hi Guys,
    Is it possible to have a MacBook Pro as a trusted device for two factor authentication?
    I am signed into iCloud and 'Find my Mac' on my MBP, however it is not displaying along side my iPad and iPhone as a potential trusted device.
    Googled about can't find anything confirming?
    Thanks,
    Regards,
    John

    Unfortunately, I already tried this several times prior to posting here.  The system won't let me add the same account more than once, and continues to prompt me for a password multiple times for each service.

  • Visual Studio 2013 Community Azure Login Not Working with Two-factor Authentication

    Has anybody had any problems logging in to Azure to publish when using Visual Studio 2013 Community and with two-factor authentication turned on?
    I couldn't log on until I turned off two-factor authentication.
    Regards

    Hello John,
    Thanks for posting here!
    You can try and set a credential helper like
    git-credential-winstore in order to cache your credentials. See if that helps.
    Couple of questions here:
    1) Are you using a MSA account by any chance?
    2) When you turn on two-factor authentication, do you get any error message?
    3) Did you try with different browsers?
    Looking forward to your response!
    Regards,
    Sadiqh

  • Scan to Email not working - Invalid Credentials error (using gmail and 2-factor authentication)

    I configured the HP OfficeJet 8600 printer for scan to email using the Embedded Web Server interface. In the Web interface, I added/entered an email address for my gmail account, and set the correct SMTP server details, and entered 465 for the port number. I checked the "Always use secure connection" box, as well as the "SMTP requires authentication for outgoing email messages" box. I entered correct SMTP user ID and password. Yet when I did a test, I got an error "Invalid credentials" After a lot of frustration, and trying all sorts of things, I eventually got the idea to try another email account. This time I tried a different email account, a netzero email account, configured the smtp server details for it etc. And this time when I tested the netzero email address it worked. I tried the scan to email on the printer, and it worked for the Netzero email account. it just didnt work for the gmail account. I had a while back turned on 2-factor authentication. I went to gmail settings and requested an "App password" for my HP printer. Google/gmail displayed a 16 character password, which I then entered into the password box in the HP OfficeJet printer Embedded Web Server interface (instead of my usual password), for the gmail account. And this time when I tested the email account - it worked! Problem solved! .. I share this just in case anyone else is having the same problem I had, and is going through the same frustrating experience I endured!  

    Thank you. This helped TREMENDOUSLY! 

  • Youtube uploading not working?

    I tried the one-click youtube upload option and it says that my name/password are incorrect. I definitely have IE cookies open and the name/password for the youtube account is correct. any idea what the problem is? Also, I notice the size for a .5 minute movie was over 00mb. Any suggestions on how to crop it down easily without too much quality loss? I was under the impression that youtube mode did this, but I can't get that to work.

    Ok,
    Got vado central youtube uploader to work.
    Here is the issue, at least when using?Internet Explorer v8:
    Go to menu bar,?tools, internet options, advanced tab, security section, the "check for server certificate revocation*" needs to be off instead of on.
    Close internet explorer and re-open so it takes effect. Then youtube uploaders works.
    Not sure why this is an issue using vado central youtube uploader and probably a bug as every other youtube uploader I have used with other software products has no trouble when "certificate revocation" is on

  • How do I know if I set up Apple's two factor authentication?

    How can I tell if I ever set up Apple's two factor authentication and should make sure I can find the Recovery Key?

    Hi David,
    You can check to see whether you turned on two-step verification for your Apple ID by seeing if it will allow you to turn it off. Follow the instructions in this article, though you do not actually have to turn it off -
    Apple ID: Turning off two-step verification for your Apple ID - Apple Support
    Read this article for more information on two-step verification, including the Recovery Key -
    Frequently asked questions about two-step verification for Apple ID - Apple Support
    Thanks for using Apple Support Communities.
    Best,
    Brett L 

  • YouTube upload fails due to details in description

    Recently I've come across a bug in the iMovie YouTube uploader. This post is basically another confirmation of the problems discussed in http://discussions.apple.com/message.jspa?messageID=9339330
    iMovie goes through all the steps, compression and uploading, right to the dialog providing a link to the video. The video will not be available however, making this a completely silent failure.
    Three causes for this problem has been reported, related to video metainformation:
    * Very long title
    * Tags separated by comma instead of space, thus making it one gigantic tag
    * Tags constructed with double quotes - this is what caused my problem
    I'll file a bug report later, until this is fixed it's handy for iMovie users to know about this issue.

    from browser, it will upload file using server object model. you can change the upload size for same in CA.
    as far as uploading file programatically using service, you can run the below script on server and it will resolve the issue
    $ws = [Microsoft.SharePoint.Administration.SPWebService]::ContentService
    $ws.ClientRequestServiceSettings.MaxReceivedMessageSize = 262144000
    $ws.ClientRequestServiceSettings.MaxParseMessageSize = 262144000
    $ws.Update()
    Note: 262144000 = 250 MB
    <b>Sandeep Parandekar MCPD</b><br/> <a href="http://www.parandekar.blogspot.com">http://www.parandekar.blogspot.com </a> <br/> Please mark the post that answered your question as the answer, and mark other
    helpful posts as helpful, so they will appear differently to other users who are visiting your thread for the same problem.

Maybe you are looking for

  • Is there a way to excerpt all texts from the captivate course?

    Hi all, can someone tell me whether there is a way to excerpt all texts from a captivate file? We need to convert all the texts on the screen to audio and insert the audio into each slide... Thank you for any inputs.

  • Logging to Oracle

    Hello, I wanted to log on to Oracle server. Basically we have SAP XI and the database is Oracle. how can I log on to ORacle? Thanx

  • Add RAC database as a target for EMC 12c

    Hello, I have installed Enterprise manager 12c on Host 1 Redhat linux 5.5 We have already installed a RAC database 2 nodes on Host 2 and Host 3 ; RAC version 11.2.0.3 on Redhat linux 5.5. I am planning to add the RAC database to be monitored by Enter

  • Proxy of program

    Hi I am getting 80MB CSV file and which is to be uploaded into ECC through proxy. With this much load is this scenario possible ?? I have one more option like. file--xi---file scenario. Here I have some program in ECC and this program is going to pic

  • Pavilion DV7-4087CL ATI Graphic card is not working on games! and on windows.Only Intel HD

    Hello to all, i have problem on my laptop (Pavilion DV7-4087CL_. I have windows 7 64 bit , and all drivers is update and special ATI from AMD RADEON LAST  one. After too many installation i cannot play 3d games or whatever game with my ati.  Also DXd