2 Logical Host, 2 Web Servers, Big Problem?
I am setting up a sun HA cluster using 2 E4500 servers. I have created 2 logical hosts, each one needs to host a Netscape iPlanet 4.0 web server sitting at port 80. Each logical host is serving up web applications for different clients.
If I need to fail over one of the logical hosts so that they are both running on the same system, the newly imported instance of the web server will fail because port 80 is already in use by the logical host that is on that physical host.
At first this seemed totally wrong. Each logical host should be able to run applications on any port they need to. Then someone who has a lot more time on Solaris told me that this was not the case, and each logical host had to steer clear of using the same ports as other logical hosts in the same cluster.
Can someone clue me into what is reality?
Any good documentation that tells how to set this stuff up?
Thanks!
Bruce
Hi,
The best way to resolve this would be to try implementing the same.
Instead of going through an entire cluster install/configuration
process, you may want to try setting up two different web servers
on a single node. You may want to set up a virtual interface (like
le0:1, hme0:1 etc) for this. You coud then try connecting to
individual web servers on port 80. If this works, then the two
webserver/two node cluster implementation should also work.
Hope this helps.
Thanks,
Gopinath.
Similar Messages
-
hello colleagues,
In the phase Connect Diagnostics dont show the Agent available in SLD, but when go to SLD i have the agents,
Error,
Connect Diagnostics Agent
The table does not contain any data
Agent availables in all SLD
SOAP:1.007 SRT: Unupported xstream found: ("HTTP Code 401 : Unauthorized")
Web service invocation problem on host hostname and port 8000 protocol : http logical port name : LP_WS_SMDAGENT_MONITORING
ThanksOK, then pls follow below steps;
- Go to step 'Create Users' in solman_setup System Preparation scenario and make sure the user SM_INTERN_WS has a green status. Use the 'Test Login' button to make sure the user is not locked and has correct credentials maintained in solman_setup
- Immediately after checking the user status, navigate to Configure Connectivity->Enable Web Services and execute again the 'Create Logical Ports' automatic activity, in order to propagate the correct credentials to the Logical Port definitions.
- If the above operation is not successful, repeat the two steps above, providing a different user Id in 'Create Users' step, eg SM_INTERN_W1. This will prevent situations where the user gets locked by Logical Ports using an obsolete password.
Let me know the results.
Regards,
Vivek -
Problem starting logical host on eGate 5.1.0
I'm having problem starting logical host for eGate 5.1.0 on Linux platform, and I cant see where is the problem lies. Is there anybody here that can give me some hint or guide?
Below is the error message from the log.
[#|2006-08-22T17:57:28.506+0800|WARNING|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|STCMS process ended unexpectedly with exit code 1; initiating application server restart|#]
[#|2006-08-22T17:57:28.567+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=11; ThreadName=STCMS process monitoring;|sending restart notification to server...server|#]
[#|2006-08-22T17:57:28.721+0800|WARNING|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|core.tmp_folder_deletion_failed|#]
[#|2006-08-22T17:57:28.722+0800|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|stcms.alert_shutting_down|#]
[#|2006-08-22T17:57:28.722+0800|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(1)-127.0.0.1;|stcms.broker_shutting_down|#]
[#|2006-08-22T17:57:31.020+0800|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Creating virtual server server|#]
[#|2006-08-22T17:57:31.039+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|IS AVK Instrumentation disabled|#]
[#|2006-08-22T17:57:31.045+0800|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-08-22T17:57:31.117+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC JTS Extension] The last agent commit optimization is enabled.|#]
[#|2006-08-22T17:57:32.315+0800|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]EE/SE Corba Util delegate loaded|#]
[#|2006-08-22T17:57:33.730+0800|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]Enabling SE Corba support|#]
[#|2006-08-22T17:57:34.007+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5082: Exception running j2ee services: [java.lang.RuntimeException: java.lang.ExceptionInInitializerError]|#]
[#|2006-08-22T17:57:34.008+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=0;|CORE5091: Error executing J2EE server ...
java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
... 9 more
Caused by: java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
... 11 more
Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
... 14 more
|#]
[#|2006-08-22T17:57:34.012+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5092: J2EE server reported following error: [java.lang.ExceptionInInitializerError] |#]
[#|2006-08-22T17:57:34.012+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5093: Error executing J2EE server |#]
[#|2006-08-22T17:57:34.013+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=1;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:235)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:763)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
... 7 more
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
... 8 more
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
... 9 more
Caused by: java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
... 11 more
Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
... 14 more
|#]
[#|2006-08-22T17:57:34.023+0800|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server Startup failed. Exiting...|#]
[#|2006-08-22T17:57:34.023+0800|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server shutdown in progress...|#]
[#|2006-08-22T17:57:34.024+0800|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|WEB0303: Stopping Tomcat.|#]
[#|2006-08-22T17:57:34.025+0800|WARNING|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=2;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: WEB0106: An error occurred while stopping the web container
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:536)
at com.sun.enterprise.web.PEWebContainerLifecycle.onShutdown(PEWebContainerLifecycle.java:65)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.PEMain.run(PEMain.java:255)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: LifecycleException: WEB0103: This web container has not yet been started
at com.sun.enterprise.web.WebContainer.stop(WebContainer.java:529)
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:528)
... 9 more
|#]
Hopefully somebody can help me as I'm stuck with it for few days already. Thank you.This is what I got when I try to start the server from the directory logicalhost/is/domains/domain1/bin/
./startservAug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger <init>
INFO: Setting URL to http://localhost:18000
Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
INFO: Opening connection to http://localhost:18000
Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
INFO: Connection to http://localhost:18000 opened successfully.
Aug 23, 2006 7:23:55 PM com.stc.is.util.pinger.HttpOKPinger isAlive
SEVERE: Connection refused
java.net.ConnectException: Connection refused
at java.net.PlainSocketImpl.socketConnect(Native Method)
at java.net.PlainSocketImpl.doConnect(PlainSocketImpl.java:333)
at java.net.PlainSocketImpl.connectToAddress(PlainSocketImpl.java:195)
at java.net.PlainSocketImpl.connect(PlainSocketImpl.java:182)
at java.net.Socket.connect(Socket.java:507)
at java.net.Socket.connect(Socket.java:457)
at sun.net.NetworkClient.doConnect(NetworkClient.java:157)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:365)
at sun.net.www.http.HttpClient.openServer(HttpClient.java:477)
at sun.net.www.http.HttpClient.<init>(HttpClient.java:214)
at sun.net.www.http.HttpClient.New(HttpClient.java:287)
at sun.net.www.http.HttpClient.New(HttpClient.java:299)
at sun.net.www.protocol.http.HttpURLConnection.getNewHttpClient(HttpURLConnection.java:792)
at sun.net.www.protocol.http.HttpURLConnection.plainConnect(HttpURLConnection.java:744)
at sun.net.www.protocol.http.HttpURLConnection.connect(HttpURLConnection.java:669)
at sun.net.www.protocol.http.HttpURLConnection.getInputStream(HttpURLConnection.java:913)
at java.net.HttpURLConnection.getResponseCode(HttpURLConnection.java:367)
at com.stc.is.util.pinger.HttpOKPinger.isAlive(Unknown Source)
at com.stc.is.util.Ping.main(Unknown Source)
Aug 23, 2006 7:23:55 PM com.stc.is.util.Ping main
INFO: IS is not alive.
Startup failed.
any clue what is it about? -
ACE probing of "virtual hosts" on web servers
We got some web servers that hosts multiple web sites and would like to probe each of these sites. Is there a way to configure a probe to present the request for a particular web site versus the other without falling into the catch all clause of the http server configured on the box ?
ThanksHello Folks,
I wonder if you could get away with just using the built-in HTTP probe rather than the scripted probe? With the built-in HTTP probe, you can configure all sorts of HTTP headers, including the Host header which might be all you need for your server hosting multiple sites.
Just to clarify on the support for scripted probes that TAC supports: If the script is downloaded from cisco.com, and is not modified, then TAC will support it. It is not supported if it is modified, and TAC will not support custom-created scripts.
Hope this helps,
Sean -
Is it possible for me to host 2 web servers using 1 public ip, if I do a nat statement to both of them, how will it know which server to use from the outside ?
Hello Carl,
I can see that you have some trouble configuring NAT.
Please check the following link for some usefull information:
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a008044eddc.html
But answering your question:
straight link:
Avoiding Server Overload Using TCP Load Balancing
Perform this task to configure server TCP load balancing by way of destination address rotary translation. These commands allow you to map one virtual host to many real hosts. Each new TCP session opened with the virtual host will be translated into a session with a different real host.
SUMMARY STEPS
1. enable
2. configure terminal
3. ip nat pool name start-ip end-ip {netmask netmask | prefix-length prefix-length} type rotary
4. access-list access-list-number permit source [source-wildcard]
5. ip nat inside destination-list access-list-number pool name
6. interface type number
7. ip address ip-address mask
8. ip nat inside
9. exit
10. interface type number
11. ip address ip-address mask
12. ip nat outside
http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_chapter09186a008044eddc.html#wp1048769
example:
ip nat pool real-hosts 192.168.15.2 192.168.15.15 prefix-length 28 type rotary
ip nat inside destination list 2 pool real-hosts
interface serial 0
ip address 192.168.15.129 255.255.255.240
ip nat outside
interface ethernet 0
ip address 192.168.15.17 255.255.255.240
ip nat inside
access-list 2 permit 192.168.15.1
All from cisco website.
If this helps, please rate my post.
Thanks,
Vlad -
BIG PROBLEM: CSS files not loading because of international characters in file name
I have Muse Beta 7 in Spanish.
The program creates a css file called master_a-página-maestra.css in css folder. It is referenced in the resulting HTML code here:
<!-- CSS -->
<link rel="stylesheet" type="text/css" href="css/site_global.css?3951792836"/>
<link rel="stylesheet" type="text/css" href="css/master_a-p%c3%a1gina-maestra.css?fileVersionPlaceholder"/>
<link rel="stylesheet" type="text/css" href="css/index.css?3948175564"/>
When you work locally in your Windows formatted har drive, everything looks fine, but when you upload your files to a server, everything is screwed up. The server doesn't recognizes the URL and returns an error page, resulting in style errors in the entire site.
This can also happens with html files if the title of the page contains international characters or with images if the image file name in your Hard Drive contains international characters.
I already pointed out long time ago Muse was generating file names with international characters like á, ñ, etc but nobody cared about it. Too bad. I had to activate file name customization but I think that Muse should replace automatically this characters in the same way that it replaces other conflictive characters like commas or ampersands.
This is not a fault of the FTP client. Accented characters are not web safe regardless of the FTP client you are using. It is a server side issue. Some servers support it some others don't. I don't mind if it works in Adobe Catalyst server because the final website is going to be in another server and maybe next year when paid hosting is ended the client may move it to another server.
It makes more sense to replace accented characters in file names by their not accented equivalents ('a' instead of 'á', 'N' instead of 'Ñ', etc) and avoid all this problem.Zak, It is funny you mention it, because the site I am talking about is hosted in 1and1. try this: http://www.artofwalls.com/rosannawalls/biografía.html
As you can see, the offending "í" in the file name causes 1and1 server to throw a "page not found" error. And this has happened with many other servers I have tried since.
Muse boast of generating code fully compatible with all major web browsers but by using international characters in file names it ggenerates code suitable only for very few web servers. International characters have been always a no-no for internet URLs. Internet was designed by people who didn't care about ascii codes beyond 127 so using international characters in html file names is just call for problems.
"to work with your hosting provider to determine how to enable Unicode encoded (UTF-8) file names and HTML files on their servers" is not a viable solution most of the time unless you are a Very Important Client of your host provider. If not, making changes means money for them and if you are the only one who complains, they are going to just tell you to not use international characters in your names. -
Oracle RAC / Logical Data Guard causing network problems on VMware
We have VMWare 5.0 cluster across the 12 blades (6 per chassis) running a mixture of Red Hat and Windows 2008 R2 vms. The Red Hat boxes are two times two node Oracle RAC (primary and secondary), also apache web servers and jboss application servers. The Windows servers are for AV/DC/Management/Monitoring.
The problem is that intermittent network connectivity to random Windows and Red Hat boxes occur when the Oracle RAC builds up archive logs and then ships / applies them to the secondary nodes, between ESX nodes either on different blades in the same chassis or across the chassis and even when all RAC nodes are on the same ESX host.
We are using NFS, Oracle 11g and Red Hat 6.2.
Sorry if this info is a bit vague, im not an Oracle expert! :-)
thanks,
DaveHi,
1.) The calculation for Standby RedoLogs is:
(Max Number of Logfiles per thread (Instance) +1) * Max Number of Threads (Instances))
So if you have 4 Redo Log Groups on your primary (which is 2 Redo Log Groups per Instance), then it ends up:
(2 +1) * 2 = 6
So actually you will only need 6 standby redo logs, not 8. But 2 more don't harm.
Your primary will need exactly the same number (6 or in your case 8). Which will be 3 per thread/instance or in your case 4.
2.) The SID List in the listener.ora is a listing of SIDs the Listener is listening on. It is not the listener name.
Hence it is not "lsnrctl guard_dgmgrl start" but only "lsnrctl LISTENER start", whereas the LISTENER is the default and "lsnrctl start" would be sufficient.
However since this is grid infrastructure with the listener running out of ASM home, be sure to have set your environment to GI Home not to DB_HOME for the listener.ora entries, but to DB_HOME for the tnsnames.ora entries necessary for data guard.
And since listener is running under clusterware you should use "srvctl stop listener" and start.
Last but not least the SID entries for dataguard have to use DGMGRL not dgmgrl.
3.) Here is the whitepaper you are looking for:
www.oracle.com/goto/maa
Also for client failover best practices.
(Here the direct link to the RAC whitepaper):
http://www.oracle.com/technetwork/database/features/availability/maa-wp-10g-racprimarysingleinstance-131970.pdf
However since this is 10g you should combine this with the 11g RAC standy paper (e.g. SCAN Listener setup).
Sebastian -
Hi everybody, I am in Turkey on a long assignment, I need help solving a big problem on my macbook pro os 10.9.3. The other week my wife visited some website and now we have a redirect virus of some sort, and every other time when we click on a link or anywhere on the page we are redirected to this casino web site, https://casino.7bets10.com/tr/?from=hy9yKXD43jSC-8Oxbw4femNd7ZgqdRLk-dHJpeG9uaXR l. Its the same whether on Chrome or Safari. Does anyone have a solution, thank you!
1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off merely by the seeming complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the behest of a stranger. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed:
Copy a line of text in this window to the Clipboard.
Paste into the window of another application.
Wait for the test to run. It usually takes a few minutes.
Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts 51 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' \*AutoCad \*dropbox \*GoogleDr\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 ` route -n get default|awk '/e:/{print $2}' ` 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB com.apple.AirPortBaseStationAgent 464843899 );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^\([0-9]+\) /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' /^ *$|CSConfigDot/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/\/Users\/[^/]+/~/g ' ' s/^ +//;5p;6p;8p;12p;' ' {sub(/^ +/,"")};NR==6;NR==13&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: [^EO]|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<200) print "com.apple.";} ' ' $3~/[0-9]:[0-9]{2}$/ { gsub(/:[0-9:a-f]{14}/,"");} { print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { print "'${p[41]}'";if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$|'${p[41]}'/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:[^:]+//p ' '/root/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1000) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/ { next;} /(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { print "'${p[41]}'.plist\t'${p[42]}'";if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[9]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/ { next;} /%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|OpenD/!s/:.+//p' ' (/k:/&&$3!~/(255\.){3}0/ )||(/v6:/&&$2!~/A/ ) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]" "$1;b=b$1;} END { if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n [N/A]";"file -b "F|getline T;if(T!~/^(AS.+ (En.+ )?text$|POSIX sh.+ text ex)/) F=F" ("T")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n ...and %s more line(s)\n",l-L);} ' ' /^ +[NP].+ =/h;/^( +D.+[{]|[}])/{ g;s/.+= //p;};' ' /^ +B/{ s/.+= |(-[0-9]+)?\.s.+//g;p;} ' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/\(L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9;} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' 's/0/Off/p' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps sudo\ crontab sudo\ iotop top pkgutil PlistBuddy whoami cksum kextstat launchctl sudo\ launchctl crontab 'sudo defaults read' stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' defaults\ read scutil sudo\ dtrace sudo\ profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil sudo\ lsof test );c2=(com.apple.loginwindow\ LoginHook '-c Print /L*/P*/loginw*' '-c Print L*/P*/*loginit*' '-c Print L*/Saf*/*/E*.plist' '~ $TMPDIR.. \( -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 \)' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' '-c Print\ :'${p[35]}' 2>&1' '-c Print\ :Label 2>&1' '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$Message' -k Sender kernel -k Message Req 'bad |Beac|caug|dead[^bl]|FAIL|fail|GPU |hfs: Ru|inval|jnl:|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|tim(ed? ?|ing )o|WARN' -k Message Rne 'Goog|ksadm|SMC:' -o -k Sender fseventsd -k Message Req 'SL' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cgh] ! -name *ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true \) -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '-L {/{S*/,},}L*/Lau* -type f' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Ca*/*/Ex,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t /S*/L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --only-files --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' -i4TCP:0-1023 com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' );N1=${#c2[@]};for j in {0..8};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents launchd Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};';done;A7(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0(){ [[ "$v" ]]&&echo "$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "$s"<<<"$v"`&&C1 1 $1;};for i in 1 2;do for j in 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;A2 0 $((N1+1)) 2;C0;A1 0 $N1 1;C0;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 14 12 14;D22 6 36 13 15;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D22 11 17 17 20;for i in 0 1;do D22 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A2 19 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;A2 4 20 21;B7 6;B2 9;A4 14 7 52 9;B2 10;B6 9 10 4;C3 25;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D13 21 0 32 19;D13 10 42 32 40;D22 29 35 46 39;};D13 14 1 48 42;D12 34 43 53 44;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 26 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 33 34 42 37;B1&&D23 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 20 42 32 41;D13 14 2 48 43;D13 4 5 32 1;D22 4 4 50 0;D13 14 3 49 5;D12 26 48 59 49;B3 4 22 57;A1 26 46 56;B7 22;B3 0 0 58;C3 47;D23 22 9 37 7;A7;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start Time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed. -
I have problem with self hosted fonts I have added to MUSE.
It works normally in Muse while working, also in preview after export to html but doesn't work online after upload ( I have tried it on different servers).
I tried same web font on easy webpage not using muse and it works properly. What can I do?
Preview after export to HTML:
After upload to FTP in Safari / Google Chrome is the same
Fonts are in the fonts folder after export and also in css. I can see it as self-hosted web fonts, Matching System Font is also OK.
The example of not working page:
menuEN - all green headlines.
I am working on Macbook Pro with OS X Yosemite, browsers Safari and Google Chrome both. Font is Etelka - if it is important.
Thank you very much for your help,
ElenaHi Abhishek,
the site is directly uploaded using MUSE Upload to ftp host. When I open it with ftp client, there is off file of etelkawidemedium in fonts file.
And I have tried to upload plain webpage with the same web font - not made in Muse and it works.
http://www.golfklubk.cz/testwebfont/
So what should I do?
The answer from Shaun is little bit complicated for me:)
Thanks, Elena -
Move and redeploy application- and web-servers for Planing?
Hi, all!
Have Hyperion Planing ability to move application- and web-servers from unix-machine to another win-machine and after redeploy existing unix-installed planing on it?They are actually for for 2 different things. The Sun WAS is for enterprise applications, EJBs and the like.
Tomcat is for simpler Servlet/JSP hosting.
The Sun WAS actually uses the Tomcat server as its Servlet/JSP engine then adds EJBs on top. -
Attaching remote event receiver to a list on host web.
We have an O365 Sharepoint 2013 site. I am trying to create a remote event receiver and attach it to a list on host web instead of appweb. Below are the links that I am referencing to do it:
http://www.codeproject.com/Articles/636058/Adventures-with-SharePoint-2013-Remote-Event-Recei
http://blogs.msdn.com/b/knewton/archive/2012/12/11/defining-content-in-host-web-from-an-app-for-sharepoint.aspx
They are using 'AppInstalled' event to accomplish this. The method is as follows: get the client context of the host web, get our target list in the host web, get the service url of the remote event receiver using code below:
string remoteUrl = string.Format("https://{0}/OurRemoteEventReceiver.svc",
OperationContext.Current.Channel.LocalAddress.Uri.DnsSafeHost + "/services");
and then use it while adding an event receiver to our target list. A different way of obtaining this remoteUrl is shown in the second post.
When I try to do this I get the below error:
CorrelationId: eb837c4c-c434-4067-99f4-ad9b38e30d82
3> ErrorDetail: The remote event receiver callout failed.
3> ErrorType: Transient
3> ErrorTypeName: Intermittent
3> ExceptionMessage: The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from
the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.
3> Source: Common
3> SourceName: Common App Deployment
Also, the 'Grant permissions to the App' window appears when I hit Deploy and immediately goes away before I hit or even see the 'Trust it' button. Then, after a while I get the above error in output window. This happens whenever I add the 'AppEventReceiver.svc'
by selecting 'AppInstalled' property to True and then write any code(or even not write any code) in it that targets the host web. Any suggestions please?Hi,
We can add the code snippet below in the "App Installed" event handler.
EventReceiverDefinitionCreationInformation eventReceiver = new EventReceiverDefinitionCreationInformation();
eventReceiver.EventType = EventReceiverType.ItemAdding;
eventReceiver.ReceiverAssembly = Assembly.GetExecutingAssembly().FullName;
eventReceiver.ReceiverClass = "OurRemoteEventReceiver";
eventReceiver.ReceiverName = "OurRemoteEventReceiver";
eventReceiver.ReceiverUrl = "http://xxx/OurRemoteEventReceiver.svc";
eventReceiver.SequenceNumber = 1000;
Web web = SPutil.getSP("http://sub.domain.com/sites/apps");
List targetList = web.Lists.GetByTitle("Host Web List");
targetList.EventReceivers.Add(eventReceiver);
web.Context.ExecuteQuery();
You will need to include an additional .NET class as well:
using System.Reflection;
If the problem still existed, I suggest to debug your remote event receiver project to find the cause of the error. The link below for your reference:
http://blogs.msdn.com/b/officeapps/archive/2013/01/03/debugging-remote-event-receivers-with-visual-studio.aspx
More information:
Add list item properties with a remote event receiver
http://code.msdn.microsoft.com/office/SharePoint-2013-Add-list-2c6e71e0
Best Regards,
Dennis Guo
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Unable to Start JCAPS 5.1.0 Logical host in Windows XP
Hi,
I am unable to start Start JCAPS 5.1.0 Logical Host on my Windows XP OS. I have installed it recently following the JCAPS installation instructions. I have created a domain with the default name 'domain1'.
Please see the error message that i get in my logs folder C:\JavaCAPS51\logicalhost\is\domains\domain1\logs
Starting Integration Server 5.1 (build 20060319-0947) ...
[#|2006-10-05T11:11:00.341+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_06] from [Sun Microsystems Inc.]|#]
[#|2006-10-05T11:11:02.705+0100|INFO|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-10-05T11:11:02.965+0100|INFO|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-10-05T11:11:02.965+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|JMS5038: jms-service element in domain.xml is configured to have type=REMOTE. JMS service will be started locally only if type is LOCAL.|#]
[#|2006-10-05T11:11:02.975+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|STCMS configuration: dir=[../../domains/domain1/stcms/instance1]; bin=[C:\JavaCAPS51\logicalhost\is\domains\domain1/../../stcms/bin]; config dir=[C:\JavaCAPS51\logicalhost\is\domains\domain1/config]; config=[C:\JavaCAPS51\logicalhost\is\domains\domain1/config/stcms.default.Properties]|#]
[#|2006-10-05T11:11:03.576+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Minimum nonce freshness limitation time period is set to: 300000|#]
[#|2006-10-05T11:11:03.576+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Maximum nonce clock skew limitation time period is set to: 0|#]
[#|2006-10-05T11:11:03.576+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Nonce cache sweep interval is set to: 180000|#]
[#|2006-10-05T11:11:03.636+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Registered STCMS configuration MBean com.sun.appserv:jmsservertype=stcms,name=SeeBeyond_JMS_IQ_Manager,type=messaging-server-config-mbean|#]
[#|2006-10-05T11:11:03.867+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|stcms journal service server disabled|#]
[#|2006-10-05T11:11:03.867+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Registered STCMS admin management MBean com.sun.appserv:jmsservertype=stcms,name=SeeBeyond_JMS_IQ_Manager,type=messaging-server-admin-mbean|#]
[#|2006-10-05T11:11:03.877+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Registered STCMS alert MBean com.sun.appserv:jmsservertype=stcms,name=SeeBeyond_JMS_IQ_Manager,type=messaging-server-alert-mbean|#]
[#|2006-10-05T11:11:03.877+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|stcms server alert disabled|#]
[#|2006-10-05T11:11:03.877+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Set user.timezone=Europe/London|#]
[#|2006-10-05T11:11:03.887+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|Starting STCMS server on Windows XP|#]
[#|2006-10-05T11:11:04.618+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|Monitoring STCMS process ...|#]
[#|2006-10-05T11:11:06.370+0100|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Creating virtual server server|#]
[#|2006-10-05T11:11:06.441+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|IS AVK Instrumentation disabled|#]
[#|2006-10-05T11:11:06.461+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-10-05T11:11:06.901+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC JTS Extension] The last agent commit optimization is enabled.|#]
[#|2006-10-05T11:11:07.782+0100|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]EE/SE Corba Util delegate loaded|#]
[#|2006-10-05T11:11:09.395+0100|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]Enabling SE Corba support|#]
[#|2006-10-05T11:11:09.605+0100|WARNING|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|STCMS process ended unexpectedly with exit code 1; initiating application server restart|#]
[#|2006-10-05T11:11:09.635+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=11; ThreadName=STCMS process monitoring;|sending restart notification to server...server|#]
[#|2006-10-05T11:11:09.685+0100|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;|WEB0303: Stopping Tomcat.|#]
[#|2006-10-05T11:11:09.685+0100|WARNING|IS5.1|javax.enterprise.system.core|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;stacktrace-id=0;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: WEB0106: An error occurred while stopping the web container
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:536)
at com.sun.enterprise.web.PEWebContainerLifecycle.onShutdown(PEWebContainerLifecycle.java:65)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.Shutdown.startShutdown(Shutdown.java:41)
at com.sun.enterprise.admin.event.AdminEventMulticaster.invokeShutdownEventListener(AdminEventMulticaster.java:769)
at com.sun.enterprise.admin.event.AdminEventMulticaster.handleShutdownEvent(AdminEventMulticaster.java:758)
at com.sun.enterprise.admin.event.AdminEventMulticaster.processEvent(AdminEventMulticaster.java:318)
at com.sun.enterprise.admin.event.AdminEventMulticaster.multicastEvent(AdminEventMulticaster.java:107)
at com.sun.enterprise.admin.server.core.channel.AdminChannelServer.sendNotification(AdminChannelServer.java:89)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at sun.rmi.server.UnicastServerRef.dispatch(UnicastServerRef.java:294)
at sun.rmi.transport.Transport$1.run(Transport.java:153)
at java.security.AccessController.doPrivileged(Native Method)
at sun.rmi.transport.Transport.serviceCall(Transport.java:149)
at sun.rmi.transport.tcp.TCPTransport.handleMessages(TCPTransport.java:460)
at sun.rmi.transport.tcp.TCPTransport$ConnectionHandler.run(TCPTransport.java:701)
at java.lang.Thread.run(Thread.java:595)
Caused by: LifecycleException: WEB0103: This web container has not yet been started
at com.sun.enterprise.web.WebContainer.stop(WebContainer.java:529)
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:528)
... 19 more
|#]
[#|2006-10-05T11:11:09.685+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;|CORE5051: Shutting down all J2EE applications ...|#]
[#|2006-10-05T11:11:09.685+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;|core.standalone_connector_modules_shutdown_complete|#]
[#|2006-10-05T11:11:09.685+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;|CORE5052: Application shutdown complete.|#]
[#|2006-10-05T11:11:09.715+0100|WARNING|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;|core.tmp_folder_deletion_failed|#]
[#|2006-10-05T11:11:09.715+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;|stcms.alert_shutting_down|#]
[#|2006-10-05T11:11:09.715+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=12; ThreadName=RMI TCP Connection(2)-127.0.0.1;|stcms.broker_shutting_down|#]
[#|2006-10-05T11:11:10.176+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5082: Exception running j2ee services: [java.lang.RuntimeException: java.lang.ExceptionInInitializerError]|#]
[#|2006-10-05T11:11:10.226+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=1;|CORE5091: Error executing J2EE server ...
java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
... 9 more
Caused by: java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
... 11 more
Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
... 14 more
|#]
[#|2006-10-05T11:11:10.226+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5092: J2EE server reported following error: [java.lang.ExceptionInInitializerError] |#]
[#|2006-10-05T11:11:10.226+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5093: Error executing J2EE server |#]
[#|2006-10-05T11:11:10.226+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=2;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:235)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: com.sun.appserv.server.ServerLifecycleException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:763)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
... 7 more
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
... 8 more
Caused by: java.lang.RuntimeException: java.lang.ExceptionInInitializerError
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:374)
at com.sun.enterprise.iiop.ORBMonitoring.<init>(ORBMonitoring.java:48)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:236)
... 9 more
Caused by: java.lang.ExceptionInInitializerError
at java.lang.Class.forName0(Native Method)
at java.lang.Class.forName(Class.java:164)
at com.sun.enterprise.server.ServerContextImpl.getMonitoringRegistry(ServerContextImpl.java:368)
... 11 more
Caused by: java.lang.NullPointerException: No MBeanServer was returned by the MBeanServerFactory
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.getMBeanServer(MonitoringRegistrationHelper.java:83)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<init>(MonitoringRegistrationHelper.java:60)
at com.sun.enterprise.admin.monitor.registry.spi.MonitoringRegistrationHelper.<clinit>(MonitoringRegistrationHelper.java:55)
... 14 more
|#]
[#|2006-10-05T11:11:10.226+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server Startup failed. Exiting...|#]
[#|2006-10-05T11:11:10.226+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server shutdown in progress...|#]
[#|2006-10-05T11:11:10.236+0100|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|WEB0303: Stopping Tomcat.|#]
[#|2006-10-05T11:11:10.236+0100|WARNING|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=3;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: WEB0106: An error occurred while stopping the web container
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:536)
at com.sun.enterprise.web.PEWebContainerLifecycle.onShutdown(PEWebContainerLifecycle.java:65)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.PEMain.run(PEMain.java:255)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: LifecycleException: WEB0103: This web container has not yet been started
at com.sun.enterprise.web.WebContainer.stop(WebContainer.java:529)
at com.sun.enterprise.web.PEWebContainer.stopInstance(PEWebContainer.java:528)
... 9 more
|#]
[#|2006-10-05T11:11:10.236+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5051: Shutting down all J2EE applications ...|#]
[#|2006-10-05T11:11:10.236+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|core.standalone_connector_modules_shutdown_complete|#]
[#|2006-10-05T11:11:10.236+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5052: Application shutdown complete.|#]
[#|2006-10-05T11:11:10.236+0100|WARNING|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=4;|CORE5061: Exception :
com.sun.appserv.server.ServerLifecycleException: java.rmi.NoSuchObjectException: object not exported
at com.sun.enterprise.admin.server.core.channel.AdminChannel.destroyRMIChannel(AdminChannel.java:96)
at com.sun.enterprise.admin.server.core.AdminService.stop(AdminService.java:294)
at com.sun.enterprise.admin.server.core.AdminServiceLifeCycle.onShutdown(AdminServiceLifeCycle.java:124)
at com.sun.enterprise.server.ApplicationServer.onShutdown(ApplicationServer.java:400)
at com.sun.enterprise.server.PEMain.run(PEMain.java:255)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: java.rmi.NoSuchObjectException: object not exported
at sun.rmi.transport.ObjectTable.unexportObject(ObjectTable.java:136)
at java.rmi.server.UnicastRemoteObject.unexportObject(UnicastRemoteObject.java:280)
at com.sun.enterprise.admin.server.core.channel.AdminChannel.destroyRMIChannel(AdminChannel.java:94)
... 10 more
|#]
[#|2006-10-05T11:11:10.236+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|stcms.alert_shutting_down|#]
[#|2006-10-05T11:11:10.236+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|stcms.broker_shutting_down|#]
Starting Integration Server 5.1 (build 20060319-0947) ...
[#|2006-10-05T11:11:20.131+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5076: Using [Java HotSpot(TM) Server VM, Version 1.5.0_06] from [Sun Microsystems Inc.]|#]
[#|2006-10-05T11:11:21.062+0100|INFO|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|ADM0020:Following is the information about the JMX MBeanServer used:|#]
[#|2006-10-05T11:11:21.182+0100|INFO|IS5.1|javax.enterprise.system.tools.admin|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|ADM0001:MBeanServer initialized successfully|#]
[#|2006-10-05T11:11:21.202+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|JMS5038: jms-service element in domain.xml is configured to have type=REMOTE. JMS service will be started locally only if type is LOCAL.|#]
[#|2006-10-05T11:11:21.202+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|STCMS configuration: dir=[../../domains/domain1/stcms/instance1]; bin=[C:\JavaCAPS51\logicalhost\is\domains\domain1/../../stcms/bin]; config dir=[C:\JavaCAPS51\logicalhost\is\domains\domain1/config]; config=[C:\JavaCAPS51\logicalhost\is\domains\domain1/config/stcms.default.Properties]|#]
[#|2006-10-05T11:11:21.573+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Minimum nonce freshness limitation time period is set to: 300000|#]
[#|2006-10-05T11:11:21.573+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Maximum nonce clock skew limitation time period is set to: 0|#]
[#|2006-10-05T11:11:21.573+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Nonce cache sweep interval is set to: 180000|#]
[#|2006-10-05T11:11:21.583+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Registered STCMS configuration MBean com.sun.appserv:jmsservertype=stcms,name=SeeBeyond_JMS_IQ_Manager,type=messaging-server-config-mbean|#]
[#|2006-10-05T11:11:21.703+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|stcms journal service server disabled|#]
[#|2006-10-05T11:11:21.703+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Registered STCMS admin management MBean com.sun.appserv:jmsservertype=stcms,name=SeeBeyond_JMS_IQ_Manager,type=messaging-server-admin-mbean|#]
[#|2006-10-05T11:11:21.713+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Registered STCMS alert MBean com.sun.appserv:jmsservertype=stcms,name=SeeBeyond_JMS_IQ_Manager,type=messaging-server-alert-mbean|#]
[#|2006-10-05T11:11:21.713+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|stcms server alert disabled|#]
[#|2006-10-05T11:11:21.713+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Set user.timezone=Europe/London|#]
[#|2006-10-05T11:11:21.733+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|Starting STCMS server on Windows XP|#]
[#|2006-10-05T11:11:21.753+0100|INFO|IS5.1|javax.enterprise.resource.jms|_ThreadID=11; ThreadName=STCMS process monitoring;|Monitoring STCMS process ...|#]
[#|2006-10-05T11:11:23.205+0100|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Creating virtual server server|#]
[#|2006-10-05T11:11:23.225+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|IS AVK Instrumentation disabled|#]
[#|2006-10-05T11:11:23.235+0100|INFO|IS5.1|javax.enterprise.system.core.security|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|SEC1143: Loading policy provider com.sun.enterprise.security.provider.PolicyWrapper.|#]
[#|2006-10-05T11:11:23.386+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC JTS Extension] The last agent commit optimization is enabled.|#]
[#|2006-10-05T11:11:23.876+0100|INFO|IS5.1|com.stc.corba.any.UtilDelegate|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|[STC CORBA Extension]EE/SE Corba Util delegate loaded|#]
[#|2006-10-05T11:11:24.087+0100|WARNING|IS5.1|javax.enterprise.resource.corba.S1AS-ORB.rpc.transport|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=0;|"IOP00710209: (INTERNAL) Unable to create listener thread on the specific port"
org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 209 completed: No
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3142)
at com.sun.corba.ee.impl.logging.ORBUtilSystemException.createListenerFailed(ORBUtilSystemException.java:3160)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryAcceptorImpl.initialize(SocketFactoryAcceptorImpl.java:60)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.getAcceptors(CorbaTransportManagerImpl.java:190)
at com.sun.corba.ee.impl.transport.CorbaTransportManagerImpl.addToIORTemplate(CorbaTransportManagerImpl.java:207)
at com.sun.corba.ee.spi.oa.ObjectAdapterBase.initializeTemplate(ObjectAdapterBase.java:104)
at com.sun.corba.ee.impl.oa.poa.POAImpl.initialize(POAImpl.java:385)
at com.sun.corba.ee.impl.oa.poa.POAImpl.makeRootPOA(POAImpl.java:253)
at com.sun.corba.ee.impl.oa.poa.POAFactory$1.evaluate(POAFactory.java:163)
at com.sun.corba.ee.impl.orbutil.closure.Future.evaluate(Future.java:28)
at com.sun.corba.ee.impl.resolver.LocalResolverImpl.resolve(LocalResolverImpl.java:22)
at com.sun.corba.ee.impl.resolver.CompositeResolverImpl.resolve(CompositeResolverImpl.java:20)
at com.sun.corba.ee.impl.orb.ORBImpl.resolve_initial_references(ORBImpl.java:1112)
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:209)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: java.lang.RuntimeException: Failed to create server socket when calling ORBSocketFactory.createServerSocket(IIOP_CLEAR_TEXT, 18002)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryAcceptorImpl.initialize(SocketFactoryAcceptorImpl.java:57)
... 20 more
Caused by: java.net.BindException: Address already in use: bind
at sun.nio.ch.Net.bind(Native Method)
at sun.nio.ch.ServerSocketChannelImpl.bind(ServerSocketChannelImpl.java:119)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:59)
at sun.nio.ch.ServerSocketAdaptor.bind(ServerSocketAdaptor.java:52)
at com.sun.enterprise.iiop.IIOPSSLSocketFactory.createServerSocket(IIOPSSLSocketFactory.java:274)
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryAcceptorImpl.initialize(SocketFactoryAcceptorImpl.java:53)
... 20 more
|#]
[#|2006-10-05T11:11:24.217+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5081: Exception while creating ORB: [org.omg.CORBA.INTERNAL: vmcid: SUN minor code: 209 completed: No]|#]
[#|2006-10-05T11:11:24.217+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5082: Exception running j2ee services: [java.lang.RuntimeException: Unable to create ORB]|#]
[#|2006-10-05T11:11:24.217+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=1;|CORE5091: Error executing J2EE server ...
java.lang.RuntimeException: Unable to create ORB
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: java.lang.RuntimeException: Unable to create ORB
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:224)
... 9 more
|#]
[#|2006-10-05T11:11:24.217+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5092: J2EE server reported following error: [Unable to create ORB] |#]
[#|2006-10-05T11:11:24.217+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|CORE5093: Error executing J2EE server |#]
[#|2006-10-05T11:11:24.217+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;stacktrace-id=2;|CORE5071: An error occured during initialization
com.sun.appserv.server.ServerLifecycleException: com.sun.appserv.server.ServerLifecycleException: Unable to create ORB
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:235)
at com.sun.enterprise.server.PEMain.run(PEMain.java:222)
at com.sun.enterprise.server.PEMain.main(PEMain.java:186)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.apache.commons.launcher.ChildMain.run(ChildMain.java:269)
Caused by: com.sun.appserv.server.ServerLifecycleException: Unable to create ORB
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:763)
at com.sun.enterprise.server.ApplicationServer.onInitialization(ApplicationServer.java:233)
... 7 more
Caused by: java.lang.RuntimeException: Unable to create ORB
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:351)
at com.sun.enterprise.server.J2EEServer.main(J2EEServer.java:754)
... 8 more
Caused by: java.lang.RuntimeException: Unable to create ORB
at com.sun.enterprise.server.J2EEServer.run(J2EEServer.java:224)
... 9 more
|#]
[#|2006-10-05T11:11:24.217+0100|SEVERE|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server Startup failed. Exiting...|#]
[#|2006-10-05T11:11:24.217+0100|INFO|IS5.1|javax.enterprise.system.core|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|Server shutdown in progress...|#]
[#|2006-10-05T11:11:24.217+0100|INFO|IS5.1|javax.enterprise.system.container.web|_ThreadID=10; ThreadName=org.apache.commons.launcher.ChildMain;|WEB0303: Stopping TAccording to your log...
"Unable to create ORB"
at com.sun.corba.ee.impl.legacy.connection.SocketFactoryAcceptorImpl.initialize
And related message...
(INTERNAL) Unable to create listener thread on the specific port"
Failed to create server socket when calling ORBSocketFactory.createServerSocket(IIOP_CLEAR_TEXT, 18002)
Address already in use: bind
Would indicate that the address 18002 is already used by another process.
So you can do:
1.restart your machine:
2. a netstat -an to validate that the port is free
You may have the localhost already started as a service on your machine...
TE -
Two web servers cant use same port forwarding rule???
I have two web servers, each configured to respond to http reqests on port 80. I use NoIP service to map a domain name to my router. I create a port forwarding assignment for Server A by selecting the WebServer rule in the port forwarding rule table. All is fine. For Server B, I select the same Webserver rule and the router says there is a conflict.
I don't understand why. I think the router has enough information to route a http request for Server B by knowing its MAC address, which is different than Server A MAC address.
What am I missing here???
I was able to do this on my previous router with DD-WRT.....
So it would appear the way to resolve this is to assign a different port address to Server B???
grrrrrrrrrr I hate this routerYou shouldn't have been able to do that on any router. You have to change the listening port of server 2, to 8080 or something like that, or make one a secure server and run it over 443
That is a known issue with port forwarding
Problem #8:
Same Port in Multiple Rules
There are some routers such as Linksys, D-Link and many others that do not do any checks if a port is already in another port forwarding rule. A port can only be forwarded to one Computer/IP at a time. So when there are multiples of the same port number the port forwarding rule will not work.
Here is an example.
As you can see port 2350 is in 2 rules. The 1st one points to a different IP than that of the 2nd rule. So the router will honor the 1st rule and the 2nd port forwarding rule to port 2350 fails.
By removing the 1st rule the 2nd one will now work. -
Creating logical host on zone cluster causing SEG fault
As noted in previous questions, I've got a two node cluster. I am now creating zone clusters on these nodes. I've got two problems that seem to be showing up.
I have one working zone cluster with the application up and running with the required resources including a logical host and a shared address.
I am now trying to configure the resource groups and resources on additional zone clusters.
In some cases when I install the zone cluster the clzc command core dumps at the end. The resulting zones appear to be bootable and running.
I log onto the zone and I create a failover resource group, no problem. I then try to create a logical host and I get:
"Method hafoip_validate on resource xxx stopped or terminated due to receipt of signal 11"
This error appears to be happening on the other node, ie: not the one that I'm building from.
Anyone seen anything like, this have any thoughts on where I should go with it?
Thanks.Hi,
In some cases when I install the zone cluster the clzc command core dumps at the end. The resulting zones appear to be bootable and running.Look at the stack from your core dump and see whether this is matching with the bug:
6763940 clzc dumped core after zones were installed
As far as I know, the above bug is harmless and no functionality should be impacted. This bug is already fixed in the later release.
"Method hafoip_validate on resource xxx stopped or terminated due to receipt of signal 11" The above message is not enough to figure out what's wrong. Please look at the below:
1) Check the /var/adm/messages on the nodes and observe the messages that got printed around the same time that the above
message got printed and see whether that gives more clues.
2) Also see whether there is a core dump associated with the above message and that might also provide more information.
If you need more help, please provide the output for the above.
Thanks,
Prasanna Kunisetty -
Similar logical host resource configured on 2 different resource groups
hi,
I had an issue with logical host setup as follows.
Background
We had a failover resource group RGA which is running a critical Oracle instance and listener process.
It has a logical host resource ora-lh-rs configured with logical host pointing to VirtualHostA.
I need to create another failover resource group called RGB with another Oracle instance.
Now at present this Oracle instance (Not under cluster control yet) is listening to the same logical host - VirtualHostA as RGA.
When I create this new resource group RGB, I need to configure it to share the same logical host as RGA.
The problem is if I need to add the logical host resource ora-lh-rs with VirtualHostA to this RGB, I foresee that there will be an IP address conflict if I failover RGB to the other cluster node (If my guess is wrong, but logically there should be an IP address conflict if SUN Cluster does not block me from adding the same logical host resource to RGB).
Question
Is there any other way to overcome this issue other than to configure the second Oracle instance to listen on a different logical IP?
To add, RGB is a less priority Oracle instance and will always need to be with RGA on the same node.
Any suggestions are welcome. My apology if this question sounds stupid as I do not have an UAT environment to test.
Thanks
ldd76HI Tim,
Thanks very much for your kind advice. I must say that I have very little experience with SUN Cluster so I beg your pardon if my concept is too superficial.
The reason why I cannot put both Oracle instance in the same RG is because that' s my boss initial proposal. I will speak to her again on the log_only option.
But can I confirm that the command looks like this after I add the resources to RGA.
scrgadm -cj rgb-ora-rs -y Failover_mode=LOG_ONLY (Oracle server)
scrgadm -cj rgb-lsn-rs -y Failover_mode=LOG_ONLY (Oracle Listener)
scrgadm -cj rgb-hasp-rs -y Failover_mode=LOG_ONLY (HA Storage Plus)
As for the logical host questions, it has been legacy that both the Oracle instance listens on the same logical IP(Just that the new and less critical Oracle instance is not under cluster control yet)
But my gut feel for the reason behind this is that the less important Oracle instance is always running on the same node where RGA is running (since that Oracle instance is used for data warehousing with data replicated from the more critical Oracle instance only) else it is meaningless. Thats my guess why ony one logical IP is used.
If the direction is still to use RG_affinities, then if I tweak the following steps a bit will it work?
1) Create RGB.
2) Activate RGB - scswitch -Z -g RGB
3) Offline RGB - scswitch -F -g RGB
4) Failover RGA to the other node
5) Failover RGB to the other node
6) Offline RGB on the other node
7) Failover RGA back to the original node
8) Failover RGB back to the original node
Thanks.
Maybe you are looking for
-
Database Table cannot be found when Verify Database
Post Author: brentlaw CA Forum: Other I have been using CRW 7 for many years. I recently upgraded to XI (I have current version). I can open existing reports and create new reports fine. The problem is when I Verify Database I get an error message
-
How can i make a CHECK in an ALTER table, to compare 2 Variables of TWO different tab
I have 3 tables: EVALUATION (No_expert, No_article) EXPERT (No_expert, origine, name) AUTHOR_ARTICLE (No_Article, Code_author) AUTHOR (Code_author, Name, Original) and my question is: How can i make a check to refuse each time an EXPERT ADDED to the
-
Add dynamic buttons to each report row and bind the row data to buttons specific to that row
I have a page with a form at the top and a report at the bottom which is tied to a table. I need to add a pair of buttons for each row of the table and add dynamic actions for these buttons. I need to submit the data corresponding to the row to a RES
-
Font errors installing 9R2 on Mandrake 8.2
Hello, I am trying to install Oracle 9.2 (R2) on a mandrake 8.2 linux with the latest updates applied. Now, I get a very peculiar error which should be related to 9R2 because 9R1 installs OK! Starting from a clean machine and following all the recomm
-
Regarding WDR_CHIP_PAGE component
Hi all, WDR_CHIP_PAGE this is the standard component for page builder but in my system i am not getting this component. my system details EHP4 FOR SAP ERP 6.0 / NW7.01. can anyone help me out. Regards, sunaina reddy t