Database Table cannot be found when Verify Database

Post Author: brentlaw
CA Forum: Other
I have been using CRW 7 for many years. I recently upgraded to XI (I have current version). I can open existing reports and create new reports fine. The problem is when I Verify Database I get an error message "The Database table <tablename here> cannot be found. Remove this table from the report".
This happens to all existing and new created reports. The data fills correctly when previewing. The problem only occurs when Verifying Database.
I thought it might be an ODBC driver problem so I upgraded my driver to v 3.525.1117. At least I think I upgraded it I did not check the version before I installed SQL 2005 SP2. After installing SP2 it seemed to be fine but a week later the problem came back. Mysterious eh?
I am trying to launch a report from VB6 using RDC and rpt file. I get logged in correctly but at .viewreport I get a generic error message. I am assuming the problem is related the the issue I raise in this forum post.

Post Author: brentlaw
CA Forum: Other
I fixed the problem. In CR XI Developer Designer window I opened up Database-SetDataSourceLocation. I noticed that in "Properties" the last item "Use DSN Default Properties": was set to True. I changed this value to False. Now this problem is solved.
I am Not using Windows Authentication I am using SQLServer authentication. In my code I was passing SQLServer Authentication credentials.
I opened up all of my CR 7 reports in CR XI and changed this setting on both the Main and the Subreort property in the SetDataSourceLocation dialog box and now all my reports work. I am a happy camper.
I don't know if this is a CR 7 conversion to CR XI only situation or not. Hope this information helps someone else.

Similar Messages

Error for the fact table while processing the cube - attribute key cannot be found when processing

Please help as I am new to SSAS and this is urgent requirement. This is a MOLAP cube and below is the error that I am receiving when processing the cube. The cube is set to Prrocess Full. Several similar errors are popped up for various dimensions.
"Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: 'Fact_Table', Column: 'ID', Value: '1'. The attribute is 'Id'. Errors in the OLAP storage engine: The attribute key was converted to an unknown member because
the attribute key was not found. Attribute Id of Dimension: 17 - Ves - PoC Cont from Database: DB, Cube: IPNCube, Measure Group: iSrvy, Partition: Partition1, Record: 1."
Thanks in advance.

Thanks for the recommendations David.
It will be really great if you can clear some of my doubts:
To my information, all the dimensions need to be processed first and then the fact table will be processed.
So if the ID's are not present in the dimension tables, then it should not be present in the Fact table either.
Here we found null values in the dimension table and the ID's were present in the Fact table. What might be the reasons causing such situation?
Also how frequently the cube needs to be processed? Currently the ETL which processes the cube, is scheduled in a SQL Job Agent on hourly basis everyday.
Is there any possibilty that the cube might be under processing state and the SQL job for the next run getting executed trying to access and process the cube while it was still processing?

Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table: performance_fact

Hi
We are using SSAS 2008 r2 and have a cube on our data warehouse, this has been running fine for quite a while now.
However it failed yesterday with the error message:
Errors in the OLAP storage engine: The attribute key cannot be found when processing: Table:
'Performance_Fact', Column: 'accountexternalId', Value: '9474'. The attribute is 'External Id'."
Errors in the OLAP storage engine: The process operation ended because the number of errors encountered during processing reached the defined limit of allowable errors for the operation."
An error occurred while processing the '2011' partition of the 'Fact' measure group for the 'DB' cube from the DB database.
Please can someone help me to resolve the error, I don't understand what it means.
Thanks

Hello,
The error means that you have a key in the fact data which don't exist in the related dimension. Ensure that the dimension is also processed so that it contains all used keys.
Olaf Helper
[ Blog] [ Xing] [ MVP]

Errors in the OLAP storage engine: The attribute key cannot be found when processing

this is the absolute worst error message in all of computing. I despise it. Here is my situation.
SSAS 2008 R2.
I have one dimension. I have not even built my cube yet. only a dimension. I am trying to process it. I can process it when I only have a single attribute, they key. it is a composite key. When I add a new attribute (integer),
I get the error message. There are no null values. There are no blanks as its an integer.
The attribute key cannot be found where? I'm processing the dimension you idiot. there is not even a cube yet in order for any key to be found or not.

Hi Baracus,
According to your description, you get the error "Errors in the OLAP storage engine: The attribute key cannot be found when processing" when processing your cube, right?
Generally, the detail error message should like
Table: 'dbo_FactSales', Column: 'ProductID', Value: '1111'. The attribute is 'Product ID'
The above error explains that the fact table named "FactSales" contains column ProductID with value "1111" but the same ProductID is not present in your dimension table. There is a primary key - foreign key relationship exist
between the ProductID column of dimension table and fact table named "FactSales" and cube is unable to find ProductID with value 1111 in the dimension table.
At this time, what we need to do is to check either your dimension and fact table contains the value mentioned in the error message ( Value: '1111' in the above example). Here are some links about troubleshoot this issue, please see:
http://www.businessintelligence-solutions.com/ssas-typical-error-attribute-key-processing/
http://www.youtube.com/watch?v=5O7IAjvtAF4
If this is not what you want, please provide us more information about you issue, so that we can make further analysis.
Regards,
Charlie Liao
If you have any feedback on our support, please click
here.
Charlie Liao
TechNet Community Support

HT3500 My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now th printer cannot be found when TimeMachine back ups are taking place. Does anyone know the cause & remedy please?

My iMac (running Lion 10.7.3) is connected wirelessly to a Laserjet 2550. This has operated fine for a long time, but now the printer cannot be found when Time Machine back ups are taking place - Bonjour does not show any devices being available when Time Machine is running. Does anyone know the cause & remedy please?

Your points match mine pretty well,though here are some thoughts:
1. I thought about this theory myself this morning (iTunes possibly causing more issues), but I haven't been able to verify it.
2. When I set up a new user it seemed better for a while, but the issue croppped back up. Yesterday I fully wiped the machine and reinstalled from scratch. I did not reimport my user from TimeMachine, but the problem has come back. My thinking was that I might have some really old software or prefs hanging around causing the issue. No dice.
3. This is my current theory of the issue, so my next step will be to pull the RAM from Crucial and see how the system behves. IF that doesn't eliminate the problem, I'll pull the factory installed RAM and replace it with the 3rd party RAM. The odd thing is how many people seem to have similar issues - I know two personally, and have seen several posts on forums. I think the most common point for this happening was the 10.7.2 update, which would point to software as the culprit.
4. That matches my experience.
My hope is that this will be repaired in the forthcoming 10.7.3 release (current production version is 10.7.2), but otuside of what I noted above, I'm at a loss.

Some music and apps that I have downloaded from i-tunes "cannot be found" when trying to download them onto my ipod. Why is this happening when they are available on my computer?

Some music and apps that I have purchased and downloaded from i-tunes "cannot be found" when I try to put them on my i-pod. Why is this happening and what can I do about it?

In iTunes, select the audio book and righ click and select Get Info. Go to the options tab and click on Media kind and change it to Audiobook. It will then appear on the iPod under Audio books. On the iPod that is Muisc app>More>Audobooks.

HT201210 why do I get a notice that says "the required disk cannot be found"when I try to update my ipad?

Why do I get a message that says "the required disk cannot be found"when I try to download the latest version for ipad?

Try this previous discussion:
https://discussions.apple.com/message/15951340#15951340

Table "StoredProcedure" not found when changing Database location in VS 2005.

<p>I'm having a problem changing the datasource location when generating a report using the report viewer in VS2005. If the table is a stored procedure, I get the message "Table (StoredProcedureName) not found", but if the report references tables rather than a stored procedure the location is changed and the report runs successfully. The same problem was reported in earlier versions of Crystal Reports and was fixed in a service pack, but I couldn't find any documentation on the VS2005 version. </p><p>Does anybody know how to fix this problem? I am using CrystalDecisions.CrystalReports.Engine.dll version 10.2.3600.0 and SQL Server 2000.</p>

Peggy, I wonder if getting the latest SP for CR 10.2 will be better for now. SP 1 can be downloaded from here:
https://smpdl.sap-ag.de/~sapidp/012002523100006007872008E/crvs05sp1.exe
I\Let us know if that does not resolve the issue and we'll take a closer look before going all the way to CR XI.
With regards,
Ludek

File cannot be found when trying to open emailed fdf file

Hello all. I'm starting to lose my mind here so I thought I'd ask the community for any help. I'm using Acrobat Pro X. I have a PDF that a new hire is supposed to fill out. All the fields work and save just fine. There's 2 buttons at the end of the document set to email certain fields to a specific email address. When either button is clicked, an .fdf file is attached to a new outlook message. The problem is when the recipient tries to open the attachment, Adobe Acrobat X Pro (and Reader XI) comes up with the following message:
"The file you are attempting to open contains comments or form data that are supposed to be placed . This document cannot be found. It may have been moved, or deleted. Would you like to browse to attempt to locate this document?"
The original file is located on a mapped network drive (the same drive letter on both computers). The same message comes up even on the computer the email was sent from. I saved the document with "Enable Additional Features" enabled. I'm getting close to wits end. I need to be able to send the email outside the network but don't want to include the entire PDF as it has confidential information. Any suggestions?

So the recipients will need an original copy of the PDF in order to import the fdf? I know they'll get confused with that. Is there a way to just email the fields in a text file?

I get problem loading page (error 404) it says the page cannot be found when i try to access the game Mobsters through my mysapce account and i cannot access it no longer through firefox and i want to find out why i cant, can you guys please help?

i cant access my mobsters account through myspace. every time i try to access it i get "problem loading page" "this page cannot be found" "404 error" and it wont let me access it. myspace works fine but as soon as i click on the mobsters app i get the 404 error, this page cannot be found, problem loading page! can you please help?
== This happened ==
Every time Firefox opened
== i try to access mobsters game through myspace

I dont understand the answer
'''''""The problem can be solved by opening FF and choosing Tools...Add On's...select the SEARCH addon and choose UNINSTALL...restart FF browser when asked, then reload Mobsters. This worked for me. The suggestion on the 404 that says to remove Search via Add/Remove Programs is completely BS, as Search doesnt show there. ""'''''

ITunes says, "The iPod cannot be synced because it cannot be found" when it tries to sync the tracks.

When I connect my iPod Touch by USB to my MacBook with iTunes open, iTunes automatically starts syncing, as it should. When it gets to Step 3 of 5 it says "Determining tracks to sync," and then just as the status message changes the sync stops. An error icon appears in the sidebar next to my iPod. When I click the icon a message box comes up that says, "The iPod [name] cannot be synced because it cannot be found."

Have you looked at the previous discussions listed on the right side of this page under the heading "More Like This"?

"application cannot be found" when trying to open certain files

Recently i upgraded my computer to Mavericks recently and I've been having a problem opening certain files. In one day I upgraded to Mavericks and I also updated my Adobe programs to the Creative Cloud. Ever since then I cannot open any of my Adobe files. They are all saved as under the CS4 legacy format. I uninstalled CS4 after installing the Creative Cloud. Every time I try to open one of these files previously created in CS4, whether it is a photoshop ot illustrator file, I get the error message "The application cannot be found". I also can see no preview or thumbnails for the files. I talked to Adobe Support and we went through a process of deleting my preferences and it didn't work. I restarted my machine and it worked. It worked for a day and now after starting up my machine today it is saying the same thing again. After a while it just out of nowhere started working again. I'll be clear and say that I was logged into my adobe account and there were no network interuptions.
By the way, the new versions (Creative Cloud) of the adobe programs all work just fine and If I save something then it works fine. It is only when trying to read a file from a previous format.

If you are attempting to start Adobe Creative Cloud by opening a file created by its previous version, open the Adobe Creative Cloud app first, then choose Open from its File menu and select the old file. The files you are attempting to open were associated with the version you used to create them, which is now gone.
After opening them, save them again. From then on, opening them will probably open Adobe CC directly.

IPhoto says 'Files Cannot Be Found' when trying to import from SD Card

Hello all,
I have this stupid little problem with my iPhoto.
Every time I plug my SD card to import pictures I took from trips or whatnot to iPhoto, it says 'Files Cannot Be Found' but when all said and done, the files are actually there. I don't know what the problem is, but it's very annoying and I don't know how to fix it.
I highly doubt it's my camera setting and want to know if there's anything I can do within iPhoto to change that stupid little error message I get every time I try to import my photos.
For example, when I try to import like 40 pictures, at least 7-8 would alert me saying 'File Cannot Be Found'. I hit okay button and goes to next file... I have no idea what it is and it really kills me. Can anyone help?

This can occasionally happen, if iTunes cannot find your iTunes library. Do you keep your iTunes library on an external drive? Then check, if this drive is properly mounted. Does it appear on your desktop?
Sometimes simply rebooting will resolve problems with a drive that is not accessible. Also, check the settings for the location of your iTunes Media folder in the iTunes Preferences > Advanced panel:

ITunes alert says that the required disk cannot be found when trying to import a CD.

I've purchased three new CD's, when I try to import them into my iTunes using the standard promt of AAC Encoder I get the following error message
Error Occurred while converting the file The required disk cannot be found.
Any advice?

This can occasionally happen, if iTunes cannot find your iTunes library. Do you keep your iTunes library on an external drive? Then check, if this drive is properly mounted. Does it appear on your desktop?
Sometimes simply rebooting will resolve problems with a drive that is not accessible. Also, check the settings for the location of your iTunes Media folder in the iTunes Preferences > Advanced panel:

Getting message "file cannot be found" when trying to play music in iTunes

When trying to play ANY music in my iTunes Library I get the message that the file containing the music cannot be found. I recently updated to the latest version of iTunes - is this the problem or is it something else?? I thought that at least the songs purchased from the iTunes Store would play but they do not. I receive the same message which asks if I want to attempt to locate the file. I click yes and that takes me to the iTunes Library which gets me nowhere. Anyone have any ideas????? I have used iTunes for years with no problems before this.

Hi Patricia,
First, try Repairing Disk Permissions. Quit all open applications. Launch Disk Utility, it's in your Applications/Utilities folder. Select MacintoshHD 10.x.x in the panel on the left, select the FirstAid tab, then click Repair Disk Permissions. Only takes a few minutes to run, then Quit Disk Utility. Reboot your PBook and launch iTunes. See if you can play a track...
If not... with iTunes open, select iTunes Store, then from the Menu Bar, click Store/Authorize Computer and see if that works. If that doesn't work ...
Quit iTunes. Try dragging the com.apple.iTunes.plist file from the HD/Users/YourName/Library/Preferences folder to your Desktop. Launch iTunes and see if you can play tracks. If you can, drag that file back to the Preferences folder. If not, drag that file to the Trash, empty the Trash and reboot. It could be your iTunes preferences file is corrupted and needs replacing. Your Mac will create a new pref file for you the next time you launch iTunes.
Hope something helps...
Carolyn
Message was edited by: Carolyn Samit

Database Table cannot be found when Verify Database

Similar Messages

Maybe you are looking for