2 master pages with table data flow

Hi,
My form got 2 master pages. Each master page will display atleast once in the output preview. First page displays table data which may or may not flow to the second page depending on the no.of records. But, the form will show both the master pages in pdf preview( even if the second master page is empty).
Now, I have a field in the both the master pages which will show the total amount. Total amount field will have a value which should be displayed in the first page if the data doesn't flow to the second page. The total should display in the second page if data flows to the second page. Where can I write the condition and how will I know whether the form is flowing to the second page or not? I cannot write based on the pagecount because the output will always contain 2 pages.
How will I know my table is flowing to the next page or not so that I will write my logic based on it.
Thanks,
kc

Hello Dude,
Try to find out the field of the table is in which page. If it is in page 2 so u can print the amount there.
try this script
for(var i = 0 ; i < xfa.host.numPages ; i++) // loop uoto total number of pages
var oFields = xfa.layout.pageContent(i, "field");
totalfields   = oFields.length;                    // gives the number of fields in a page
   flag=1;
for (var nNodeCount = 0; nNodeCount < z; nNodeCount++) // loop through the fields
         if (oFields.item(nNodeCount).name == "find your table field")   // Here find for that field if it works print maount in that page
Good Luck
Regards,
RAkesh

Similar Messages

Two Master pages with two design pages

Hi All;
I need a help in the below scenario;
- I have two Master pages wid different header title and other information which I required for two different body pages.
I need to assign the 1st master page with all content of first page data (both design pages will display table data).
so the first page display should start with 1st master page and 1st body and after finishing the content of first table..
2nd master and body page starts with the content of 2nd table..
The issue is I am getting one extra page when I am checking design pages
Please let me know your valuable suggestion.. Helpful answer will be highly appreciated !!!
Regards
Devraj
Edited by: Dev on Aug 20, 2010 4:36 PM

HI Otto,
I am also facing similar problem,
I too hv 2 master pages and 2 body pages respectively.
first master page assigned to first body page
and second master page assigned to second body page.
But still i am able to view one extra body page in my design view.
Kindly help.

Adding Custom Breadcrumb for SharePoint 2013 Custom Master-Page With A Custom Separator.

Hi All,
I have successfully converted an HTML file to a SharePoint 2013 Custom Master-Page with relevant style sheets. But when I used within the SharePoint site I could not find the breadcrumb. So I want to know how to do that? For that breadcrumb I need a custom
separator like an arrow like in the below.
As you can see the separator is a custom built one. To have this custom separator in my HTML I have used the following code snippet.
<div class="breadcrumb-desktop">
<span class="breadcrumb-links"><a href="#">SharePoint Site Home</a></span>
<span class="breadcrumb-links"><a href="#">Sub Link 01</a></span> Active Page
</div>
The styles are as like in the below.
.breadcrumb-desktop {
width: 100%;
font-family: Arial;
padding: 23px 0 40px;
float: left;
font-size: 0.75em;
line-height: 1.25;
.breadcrumb-desktop > span.breadcrumb-links:after {
content: " \203A ";
white-space: pre;
I have tried the following code snippet within the SharePoint site as


But it did not display as I wanted.
So how am I supposed to insert these to my Custom Master-Page's breadcrumb and style them? Please could someone help me to solve this?
Thanks and regards,
Chiranthaka

Hi Chiranthaka,
Please use the following code snippet in your html master page.
<div class="CustomBreadcrumbs">
You are here:






</div>
Here is a thread for your reference:
https://social.msdn.microsoft.com/Forums/office/en-US/daabd903-df98-41da-80d8-6a942d06980e/add-breadcrumb-to-custom-master-page-html-file?forum=sharepointcustomization
We can also customize a breadcrumb control, then add it in master page.
http://msreddysharepoint.blogspot.com/2013/01/custom-breadcrumb-navigation-in.html
Best Regards
Dennis Guo
TechNet Community Support

Custom Master Page with Code behind in SharePoint 2013

Hi All,
I want to create the Custom Master Page in Sharepoint 2013 with Code file in it.
Is it possible to create? if YES the how i can achieve it??
PD

To add something to Amit's reply, you can refer to the following link on how to create master page with code behind if you are new to ASP.net.
Walkthrough: Creating and Using ASP.NET Master Pages in Visual Web Developer
http://msdn.microsoft.com/en-us/library/ehszf8ax(v=vs.90).aspx
Miles LI TechNet Community Support

Custom SharePoint Master Page with Content Editor Web Part.

Hi All,
I have created a custom SharePoint Master Page to apply within my SharePoint Site and it was a success.
When I want to add the content I have to use the script editor web part and add HTML snippets. Then the styles will reflect correctly. But when I use content editor web part some of the styles do not reflect. Lets assume that if I want to add a H2 with the
custom color, the color do not show in the ribbon. And how SharePoint know that this is an <h2> and reflect the other styles like padding, margin and so on.
Please can someone help me to solve this.
Thanks and regards,
Chiranthaka

Hi,
From your description, my understanding is that you want to add CSS code in your customized Master Page with content editor web part.
I tested your issue in SharePoint Designer, and I added CSS code successfully.
I accomplish your requirement with steps below:
Add a content editor web part in a list and add some CSS code in the web part.
Open SharePoint Designer, enter the master page.
Insert a content editor web part under INSERT tab in the Ribbon.
Open the list that have edited in step1 in the SharePoint Designer.
Copy code from the list to the Master Page as the screenshot below.
The screenshot below is my result:
In addition, why do not you add CSS code just with <style> tag in your page? Just add CSS code as below(in this method, you do not need any web part.):
<style>
h2{
background-color:green;
</style>
Best Regards,
Vincent Han
TechNet Community Support
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

Is it possible to make master pages with several title in one file? & Can I define page range from

Is it possible to make master pages with several title in one file? & Can I define page range from which page to which should be specific title?

While the number of master pages is not unlimited, you can have quite a few in any file. I've never seen the limit documented, but it's in the hundreds, or more likely thousands. There is, I believe, a page limit of 9999 pages per document, but I don't know if that includes the masters or if they are counted separately.
You can choose a page range in the Pages panel, then assign a master to them manually, and I beleive there are some scripts floating around that can assign a master page based on the appearance of a paragraph style (for chapter start pages, for example).

Target Spry RowID on page with Multiple data sets from another page

Hi all,
I am trying to target a specific data item, on a page with
multiple data sets, from a link on another page. (I also have to
pass the link through Flash, but lets start with the simple
part...)
You can take a look at the site in progress here:
http://www.3andband.com/TestSite/iframeTest3.html
From the Home page I want to link to specific news or concert
items on the News page
I have been trying to get SpryURLUtils to do it but I can't
seem to get it working.
Any help would be greatly appreciated.
Thanks!
Ben

did u try if it even passes the row value?? with a simple
alert? alert(params.row)
Also maby u need to reorder the scripts to this;
<script src="../SpryAssets/SpryURLUtils.js"
type="text/javascript"></script>
<script src="../SpryAssets/xpath.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryData.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryCollapsiblePanel.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryEffects.js"
type="text/javascript"></script>
<script src="../SpryAssets/SpryAccordion.js"
type="text/javascript"></script>
and your js script
var params = Spry.Utils.getLocationParamsAsObject();
var dsConcerts = new
Spry.Data.XMLDataSet("includes/concerts.xml", "Concerts/concert");
dsConcerts.setColumnType("image", "image");
var dsNews = new Spry.Data.XMLDataSet("includes/news.xml",
"News/item");
//Set an observer so that when the data is loaded, we update
the current row to the url param value
dsNews.addObserver({ onPostLoad: function(ds, type) {
dsNews.setCurrentRow(params.row); }
function MM_effectBlind(targetElement, duration, from, to,
toggle)
Spry.Effect.DoBlind(targetElement, {duration: duration,
from: from, to: to, toggle: toggle});
So url params get loaded before the data

Master and Details Tables Data

Hi all
I have two tables one is Master table and other one is Details table.
How to write a query to get Master as well as Details table data.
Detail table contain more than one record for particular Master Record.
Pls Help me.

My version is Oracle 9i
My Tables structures are :
SQL> desc TFMS_CONTRACT_PRICES
Name Null? Type
ITEMNUMBER NOT NULL VARCHAR2(30)
ITEMDESCR VARCHAR2(2000)
PRICE NOT NULL NUMBER
UOM VARCHAR2(30)
UNITSAWARDED NUMBER
DELIVERYPERIOD NUMBER
COMMENTSREASON VARCHAR2(15)
TOTALPOINTSSCORED NUMBER
FREEDELIVERY VARCHAR2(250)
YEAR VARCHAR2(15)
UPDATEDBY NOT NULL NUMBER
UPDATEDON NOT NULL TIMESTAMP(6)
BRANDID NOT NULL NUMBER
CONTRACTORID NOT NULL NUMBER
ISPRICEESCALATED NOT NULL CHAR(3)
SQL> desc TFMS_ACCESSORIES_MASTER
Name Null? Type
ACCESSORYID NOT NULL NUMBER
ACCESSORYNAME NOT NULL VARCHAR2(150)
DESCR VARCHAR2(250)
ISDELETED NOT NULL CHAR(1)
UPDATEDBY NOT NULL NUMBER
UPDATEDON TIMESTAMP(6)
CONTRACTORID NOT NULL NUMBER
Sample Out put:
ITEMNUMBER ACCESSORYNAME
RT57-01-13-01 Truck ToolBoxes,Riding Sun Glass
RT57-01-13-02 Door Guard,Maruthis
For one item number there may be one accessory name or more than one accessory name.i need to display accessory names with delimeter(,).
Pls help me.
Thanks in Advance.

Table Data Flow AutoPayment

Hi All,
Can anyone have a clear data flow (table) when perform autopayment F110 , and then go to DMEE generate XML file.
That means, how data transfer from table REGUH, REGUP to FPAYH, and FPAYHX
Do we need to do field mapping for this process ?
I am still have question about the process to XML file.
Your help would be high appericated and get point.
Thanks !

Hello Dude,
Try to find out the field of the table is in which page. If it is in page 2 so u can print the amount there.
try this script
for(var i = 0 ; i < xfa.host.numPages ; i++) // loop uoto total number of pages
var oFields = xfa.layout.pageContent(i, "field");
totalfields   = oFields.length;                    // gives the number of fields in a page
   flag=1;
for (var nNodeCount = 0; nNodeCount < z; nNodeCount++) // loop through the fields
         if (oFields.item(nNodeCount).name == "find your table field")   // Here find for that field if it works print maount in that page
Good Luck
Regards,
RAkesh

Auto creation of user pages with their data when they register to a site and go to that page

I have watched few posts slightly related to this topic but i didnt got the result.
I am creating an user authentication system using Dreamweaver 8, PHP and MySQL.
Database, login system and user authentication has been created.
With 'Log In User' server behavior if succeeds, the user goes to username.php file in the
site root directory. It happens to all the users with such .
But I want to take each user to his own page with his account details only. They dont need
to go or watch other users information.
How to creates a new page in dreamweaver with the username of the each user got registered
and takes him to his own page with details from database related to that user.
Thank you

I would have a db table called account details. Upon successful login run a SQL Query (recordset behavior in DW) similar to the followin: SELECT * FROM account_details WHERE UserName = 'Username'. Put the approriate fields in your page and there ya have it.
Recordset walk-thru:
http://www.garunawebdesigner.com/?p=8052

Custom Master Page with Custom Page Layout

Hi All,
I have created a Custom SharePoint Master Page. In that Master Page I have created a custom Header & Footer. In between the header and the footer I created a space to put page's content.
However I have created a page using that master page and it was successfully published.
After that I wanted to create a Custom Page Layout using that Page previously created. That also was a successful one. But when default Page Layouts in SharePoint 2013 inserted to a page it shows an area that can add content. But in my Page Layout inserted
to a page it does not show like that.
So what have I missed when I created the Custom Page Layout? Could you kindly someone tell me how to solve this matter?
Thanks and regards,
Chiranthaka

Can you confirm that your custom page layout has the same WebPart Zones as the default one? They need to be if you wish to see content that was added with the default page layout.
Nikolas Charlebois-Laprade Microsoft Certified Professional & Software Engineer http://nikcharlebois.com

How to send the jsp page with the data as attachment

hi
my application is to display all the datas from the database.In the same page. i'm having a option to select mail address from the combo box and to send the page with the same format thru mail as an attachment .
<%      String from="192.168.10.1";
          String to=request.getParameter("to");
          System.err.println(to);
          String mailhost="localhost";
         System.err.println("hiiiiiiiii");
          try
               System.err.println("byeeeeeee");
               Properties prop=System.getProperties();
               prop.put("mail.smtp.host", mailhost);
               Session ss=Session.getInstance(prop,null);
            System.err.println("session props");
               Message message = new MimeMessage(ss);
               System.err.println("message");
               message.setFrom(new InternetAddress(from));
               System.err.println("form not null");
               message.addRecipient(Message.RecipientType.TO, new InternetAddress(to));
               System.err.println("from and to r set");
               message.setSubject("Hello JavaMail Attachment");
          // Create the message part
               BodyPart messageBodyPart = new MimeBodyPart();
          // Fill the message
               messageBodyPart.setText("have u got the attachement?");
               Multipart multipart = new MimeMultipart();
               multipart.addBodyPart(messageBodyPart);
          // Part two is attachment
               messageBodyPart = new MimeBodyPart();
               DataSource source = new FileDataSource("C:/Program Files/Apache Software Foundation/Tomcat 5.0/webapps/MgmtTool/emsReport.jsp");
               messageBodyPart.setDataHandler(new DataHandler(source));
               messageBodyPart.setFileName("emsReport.jsp");
               multipart.addBodyPart(messageBodyPart);
          // Put parts in message
               message.setContent(multipart);
               System.err.println("ready");
          // Send the message
               Transport.send(message);
               out.println("mail was sent successfully");
          catch(Exception e)
          {out.println(e);}
          %>
by using this code i 'm sending the emsreport page as attachment
i'm recieving only the tabular format but i cant able to get those data which are present on that page
i dont know wat to do???
kindly help me
thank u in advance

Some of the points might help you in thinking towards right direction, you might already know this but doesn't look like you are following in your code anyway.
1. The JSP that you are emailing is uncompiled source file. It need JVM environment to be able to run on.
2. The JSP is a view technology so try to separate the view logic from the business.
3. Try to put entire business logic in a Bean and use that in your JSP to start off with.
You may need to write the HttpServletResponse#content on to the Writer and then persist it on the filesystem. and then send that persisted file as an attachment.
Have a look at http://java.sun.com/j2se/1.5.0/docs/api/java/io/Writer.html
It provide different type of writer implementations.
HttpServletResponse#getWriter() provides PrintWriter instance.
Does it make sense?

Package with table data type as out parameter.

Hi there, I managed to compile the package without error but when I am trying to test this package and
I am keep facing this error message.
Am I using correctly for the table data type as out parameter. I have no idea what is wrong with the package to fix.
Pls. help and advise me. Thanks.
Error starting at line 1 in command:
DECLARE
p_stmodel VARCHAR2(40):=null;
p_item_number VARCHAR(40):='9BX158-300';
p_item_id NUMBER:=0;
l_attribute_out test_common_api.l_item_attr_tab:=test_common_api.l_item_attr_tab();
BEGIN
test_common_api.test_attribute(p_stmodel,p_item_number,p_item_id,l_attribute_out);
END;
Error report:
ORA-06550: line 8, column 18:
PLS-00302: component 'TEST_ATTRIBUTE' must be declared
ORA-06550: line 8, column 2:
PL/SQL: Statement ignored
06550. 00000 - "line %s, column %s:\n%s"
*Cause:    Usually a PL/SQL compilation error.
*Action:
---------Package.
CREATE OR REPLACE PACKAGE test_common_api
AS
TYPE item_attr_rec IS RECORD (CONFIGURATION VARCHAR2(20),
                               PRODUCTTYPE VARCHAR2(30),
                               INTERNALPRODUCTNAME VARCHAR2(20),
                               NUMBEROFHEADS VARCHAR2(2),
                               NUMBEROFDISCS VARCHAR2(2),
                               GENERATION VARCHAR2(10),
                               FACTORYAPPLICATION VARCHAR2(150),
                               PRODUCTFAMILY VARCHAR2(60),
                               FORMFACTOR VARCHAR2(10),
                               FORMATTEDCAPACITY NUMBER,
                               FORMATTEDCAPACITY_UOM VARCHAR2(20),
                               INTERFACE VARCHAR2(30),
                               SPINDLESPEEDRPM NUMBER,
                               PRODUCTCACHE VARCHAR2(10),
                               WARRANTYMONTHS   VARCHAR2(2),
                               PHYSICAL_SECTOR_SIZE NUMBER,
                               MODELHEIGHT VARCHAR2(10),
                               ENCRYPTION_TYPE VARCHAR2(40));
TYPE l_item_attr_tab IS TABLE OF item_attr_rec;
END test_common_api;
show errors
create or replace package body test_common_api
AS
PROCEDURE test_attribute (p_stmodel IN VARCHAR2,
                           p_item_number IN VARCHAR2,
                           p_item_id IN NUMBER,
                           l_item_attr_list OUT l_item_attr_tab)
IS
l_stmodel st.stmodelnumber%TYPE;
l_market_segment VARCHAR2(10) ;
l_sub_market_segment VARCHAR2(10) ;
l_app_segment VARCHAR2(10);
l_market_name VARCHAR2(40) ;
l_ccitem seaeng_ccitemnumber.ccitemnumber%TYPE;
l_query_item VARCHAR2(1000);
l_query_model VARCHAR2(1000);
l_where VARCHAR2(1000);
l_bind_var1      VARCHAR2(40);
l_bind_var2      VARCHAR2(40);
l_sql            NUMBER:=0;
l_config VARCHAR2(40):=null;
BEGIN
   IF p_stmodel is not null THEN
       l_where :='WHERE sc.ccmodel = sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber
                  AND sc.pricingdescriptor=''MODEL''
                  AND sc.ccdashnumber =''000''
                  AND sp.detailedproductname=''GENERIC''
                  AND st.stmodelnumber= :1';
              IF p_item_number is null AND p_item_id is null THEN
                  l_config :='null';
              ELSE
                  l_config :='sc.configuration';
              END IF;
        l_bind_var1 :=p_stmodel;
        l_sql :=1;
    ELSE
        IF p_item_id is null and p_item_number is not null THEN
            l_where := 'WHERE sc.ccmodel = sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber and sc.ccitemnumber = :1';
            l_bind_var1 :=p_item_number;
            l_sql:=2;
        ELSIF p_item_id is NOT null and p_item_number is null THEN
            l_where := 'WHERE sc.ccmodel= sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber and sc.ccitemnumber in ( select msi.segment1
                        from mtl_system_items msi
                        where msi.inventory_item_id = :1)';
            l_bind_var1 := p_item_id;
            l_sql:=2;
        ELSIF p_item_id is not null and p_item_number is not null THEN
            l_where :='WHERE sc.ccmodel = sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber and sc.ccitemnumber in (select msi.segment1
                       from mtl_system_items msi
                       where msi.inventory_item_id = :1
                       AND msi.segment1=:2)';
            l_sql:=3;
            l_bind_var1 := p_item_id ;
            l_bind_var2 :=p_item_number;
        END IF;
    END IF;
l_query_item :='SELECT sc.configuration,st.producttype, sp.internalproductname, sp.numberofheads , sp.numberofdiscs,
sp.generation,sp.factoryapplication, st.productfamily,st.formfactor , st.formattedcapacity , st.formattedcapacity_uom,
st.interface,st.spindlespeedrpm,st.productcache,st.warrantymonths, st.physical_sector_size, st.modelheight, st.encryption_type
   FROM pm sp , st st, seaeng_ccitemnumber sc ';
l_query_model :='SELECT '|| l_config|| ' , st.producttype, null,null , null, null, sp.factoryapplication, null,st.formfactor, st.formattedcapacity,
st.formattedcapacity_uom,st.interface , st.spindlespeedrpm, st.productcache, st.warrantymonths,st.physical_sector_size, st.modelheight,
st.encryption_type
FROM pm sp , st st, seaeng_ccitemnumber sc ';
   IF l_sql = 1 THEN
      EXECUTE IMMEDIATE l_query_model ||l_where
                         BULK COLLECT INTO l_item_attr_list
                         USING l_bind_var1 ;
                           dbms_output.put_line(l_query_model||l_where);
    ELSIF
         l_sql =2 THEN
           EXECUTE IMMEDIATE l_query_item || l_where
                             BULK COLLECT INTO l_item_attr_list
                             using l_bind_var1;
                             dbms_output.put_line(l_query_item||l_where);
    ELSE
       EXECUTE IMMEDIATE l_query_item ||l_where
                         BULK COLLECT INTO l_item_attr_list
                         USING l_bind_var1, l_bind_var2 ;
                           dbms_output.put_line(l_query_item||l_where);
    END IF;
END test_attribute;
END test_common_api;
show errors

I think you forget to declare "PROCEDURE test_attribute" procedure in your package definition. like:
CREATE OR REPLACE PACKAGE test_common_api
AS
TYPE item_attr_rec IS RECORD (CONFIGURATION VARCHAR2(20),
                               PRODUCTTYPE VARCHAR2(30),
                               INTERNALPRODUCTNAME VARCHAR2(20),
                               NUMBEROFHEADS VARCHAR2(2),
                               NUMBEROFDISCS VARCHAR2(2),
                               GENERATION VARCHAR2(10),
                               FACTORYAPPLICATION VARCHAR2(150),
                               PRODUCTFAMILY VARCHAR2(60),
                               FORMFACTOR VARCHAR2(10),
                               FORMATTEDCAPACITY NUMBER,
                               FORMATTEDCAPACITY_UOM VARCHAR2(20),
                               INTERFACE VARCHAR2(30),
                               SPINDLESPEEDRPM NUMBER,
                               PRODUCTCACHE VARCHAR2(10),
                               WARRANTYMONTHS   VARCHAR2(2),
                               PHYSICAL_SECTOR_SIZE NUMBER,
                               MODELHEIGHT VARCHAR2(10),
                               ENCRYPTION_TYPE VARCHAR2(40));
PROCEDURE test_attribute (p_stmodel IN VARCHAR2,
                           p_item_number IN VARCHAR2,
                           p_item_id IN NUMBER,
                           l_item_attr_list OUT l_item_attr_tab);
TYPE l_item_attr_tab IS TABLE OF item_attr_rec;
END test_common_api;
show errors
create or replace package body test_common_api
AS
PROCEDURE test_attribute (p_stmodel IN VARCHAR2,
                           p_item_number IN VARCHAR2,
                           p_item_id IN NUMBER,
                           l_item_attr_list OUT l_item_attr_tab)
IS
l_stmodel st.stmodelnumber%TYPE;
l_market_segment VARCHAR2(10) ;
l_sub_market_segment VARCHAR2(10) ;
l_app_segment VARCHAR2(10);
l_market_name VARCHAR2(40) ;
l_ccitem seaeng_ccitemnumber.ccitemnumber%TYPE;
l_query_item VARCHAR2(1000);
l_query_model VARCHAR2(1000);
l_where VARCHAR2(1000);
l_bind_var1      VARCHAR2(40);
l_bind_var2      VARCHAR2(40);
l_sql            NUMBER:=0;
l_config VARCHAR2(40):=null;
BEGIN
   IF p_stmodel is not null THEN
       l_where :='WHERE sc.ccmodel = sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber
                  AND sc.pricingdescriptor=''MODEL''
                  AND sc.ccdashnumber =''000''
                  AND sp.detailedproductname=''GENERIC''
                  AND st.stmodelnumber= :1';
              IF p_item_number is null AND p_item_id is null THEN
                  l_config :='null';
              ELSE
                  l_config :='sc.configuration';
              END IF;
        l_bind_var1 :=p_stmodel;
        l_sql :=1;
    ELSE
        IF p_item_id is null and p_item_number is not null THEN
            l_where := 'WHERE sc.ccmodel = sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber and sc.ccitemnumber = :1';
            l_bind_var1 :=p_item_number;
            l_sql:=2;
        ELSIF p_item_id is NOT null and p_item_number is null THEN
            l_where := 'WHERE sc.ccmodel= sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber and sc.ccitemnumber in ( select msi.segment1
                        from mtl_system_items msi
                        where msi.inventory_item_id = :1)';
            l_bind_var1 := p_item_id;
            l_sql:=2;
        ELSIF p_item_id is not null and p_item_number is not null THEN
            l_where :='WHERE sc.ccmodel = sp.productmodelnumber AND sp.stmodelnumber = st.stmodelnumber and sc.ccitemnumber in (select msi.segment1
                       from mtl_system_items msi
                       where msi.inventory_item_id = :1
                       AND msi.segment1=:2)';
            l_sql:=3;
            l_bind_var1 := p_item_id ;
            l_bind_var2 :=p_item_number;
        END IF;
    END IF;
l_query_item :='SELECT sc.configuration,st.producttype, sp.internalproductname, sp.numberofheads , sp.numberofdiscs,
sp.generation,sp.factoryapplication, st.productfamily,st.formfactor , st.formattedcapacity , st.formattedcapacity_uom,
st.interface,st.spindlespeedrpm,st.productcache,st.warrantymonths, st.physical_sector_size, st.modelheight, st.encryption_type
   FROM pm sp , st st, seaeng_ccitemnumber sc ';
l_query_model :='SELECT '|| l_config|| ' , st.producttype, null,null , null, null, sp.factoryapplication, null,st.formfactor, st.formattedcapacity,
st.formattedcapacity_uom,st.interface , st.spindlespeedrpm, st.productcache, st.warrantymonths,st.physical_sector_size, st.modelheight,
st.encryption_type
FROM pm sp , st st, seaeng_ccitemnumber sc ';
   IF l_sql = 1 THEN
      EXECUTE IMMEDIATE l_query_model ||l_where
                         BULK COLLECT INTO l_item_attr_list
                         USING l_bind_var1 ;
                           dbms_output.put_line(l_query_model||l_where);
    ELSIF
         l_sql =2 THEN
           EXECUTE IMMEDIATE l_query_item || l_where
                             BULK COLLECT INTO l_item_attr_list
                             using l_bind_var1;
                             dbms_output.put_line(l_query_item||l_where);
    ELSE
       EXECUTE IMMEDIATE l_query_item ||l_where
                         BULK COLLECT INTO l_item_attr_list
                         USING l_bind_var1, l_bind_var2 ;
                           dbms_output.put_line(l_query_item||l_where);
    END IF;
END test_attribute;
END test_common_api;
show errors

Query Question: Sum of master and monthly table data

Hi All,
I have two tables that store financial data about programs. The PROGRAM table has the following columns (for purposes of this discussion):
ID, INITIAL_BUDGET, COST_CENTER
The PROGRAM_MONTHLY table has the following (abbreviated list of) columns:
ID, PROGRAM_ID (FK to PROGRAM.ID), CURRENT_FORECAST, RECORD_DATE
Every month, a copy of the program_monthly records for last month is made to new records in the PROGRAM_MONTHLY table and we use RECORD_DATE for our filters and comparisons. This way we have historical data, plus current month data that can be updated by our financial systems and program managers.
I am using Application Express and would like to create a dashboard chart that shows the summary of the INITIAL_BUDGET and the CURRENT_FORECAST for a selected month. Obviously, the INITAL_BUDGET doesn't change, but the CURRENT_FORECAST (and similar columns such as the amount committed to purchase orders, which were omitted to simplify the discussion) change monthly.
My goal is to create a chart that can display the initial budget, current forecast, amount committed on purchase orders, etc. for all cost centers, or just one at a time as the user requires, that is filtered by the month of the PROJECT_MONTHLY record. If I can come up with the statement for a view or query, then I can manage the rest.
The required syntax for the chart is "SELECT link, label, value FROM...", where "link" can be NULL, since is it an optional link to another URL. The "label" and "value" portion are the important parts.
For example, I have another chart that shows the project status (which is a Varchar 2 constrained to values such as, Active, On-Hold, Completed, etc.) with the status as the label and the count of the rows as the value. It starts:
select null link, pjm.PROJECT_STATUS label, COUNT(pjm.ID) value FROM ... However, I have been unable to come up with a query that generates the desired results for these PROGRAM and PROGRAM_MONTHLY tables. I have played with various types of joins and sub-queries, but my SQL just isn't up to the challenge yet. I realize that I might have to re-work the table structure to accomodate this requirement.
I would greatly appreciate any guidance in approaching this problem.
Many thanks for your time and help,
Petie

Certainly, Warren, thanks so much for your willingness to look at my problem.
To keep things simple, I will put the fundamentals of the tables with sample data. Please let me know if you would like more and I would be happy to provide it.
Table: PROGRAM
ID   PROGRAM_NUMBER   INITIAL_BUDGET   COST_CENTER
1   10001            100000           500-001
2   10002            125000           500-001
3   10003            150000           500-002
4   10004            175000           500-002
5   10005             10000           500-003
6   10006            200000           500-004Table: PROGRAM_MONTHLY
ID   PROGRAM_ID   CURRENT_FORECAST RECORD_DATE
1    1            95000            02-FEB-06
2    2           125000            02-FEB-06
3    3           145000            02-FEB-06
4    4           180000            02-FEB-06
5    5             9000            02-FEB-06
6    6           225000            02-FEB-06
7    1            97500            02-MAR-06
8    2           120000            02-MAR-06
9    3           145000            02-MAR-06
10    4           185000            02-MAR-06
11    5            10000            02-MAR-06
12    6           215000            02-MAR-06
Report Example 1
When a user would like to see the current summary data for all cost centers, they would see a chart with the following data:
INIT_BUDGET CURRENT_FORECAST
760000       772500
Report Example 2
When a user would like to see the summary data for all cost centers for last month, they would see a chart with the following data:
INIT_BUDGET CURRENT_FORECAST
760000       779000
Report Example 3
When a user would like to see the current summary data for cost center 500-001, they would see a chart with this following data:
INIT_BUDGET CURRENT_FORECAST
225000       220000I hope this better illustrates the solution I seek.
Thank you again for your time and assistance
Petie

Printing Smartform with Table data from PrintProgram

Hi,
Can any one explain the steps involved in printing the Smartform with the data from the Print Program table. How to fit table in the Smartform i.e, while designing the Smartforms layout for the table.
Thanks & Regards

Hi,
As data is coming from the print program in the table. Do the following procedure
1. In the form interface ---> Declare the internal table as same structure as in the print program. for ex: you r passing MARA table data then declare it as itab type table of mara.
2. In the window you want to create the table, right click > create> table.
3. Go to data tab give the internal table name and work area .
4. Now go to General tab-->Details.
5. Declare the line types.
6. Right click on header/main area/footer -->create table line.
7. Now give the line type which you want to use.
8. In the displayed columns>right click> create text node.
9. In the text node &mara-matnr&.
Procedure to create line type:
1. Double click on table
2. Go to table tab --> details
3. Give the table width (width you want to display on the screen should be less than or equal to the window width).
4. Line type --> Divide this into no of column you want to have in header/item.
Note: total length of all columns should be equal to the table width.
5.save.
Br,
Laxmi

2 master pages with table data flow

Similar Messages

Maybe you are looking for