2 Node RAC abnormal behaviour

Platform: "HP-UX 11.23 64-bit"
Database: "10.2.0.4 64-bit"
RAC: 2 Node RAC setup
Our RAC setup has been properly done and RAC is working fine with load balancing i.e clients are getting connection on both instances. BUT the issue I am facing with my RAC setup is High Availability testing. When I send reboot signal to "Node-2" and the "Node-1" is up what I observe and receive complain from clients that they have lost connection with database ALSO no new connections are being allowed. When I see the alert log of "Node-1" I see the following abnormal messages reported in it:
List of nodes:
0 1
Global Resource Directory frozen
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Tue Aug 9 04:02:15 2011
LMS 2: 0 GCS shadows cancelled, 0 closed
Tue Aug 9 04:02:15 2011
LMS 0: 0 GCS shadows cancelled, 0 closed
Tue Aug 9 04:02:15 2011
LMS 1: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Tue Aug 9 04:02:15 2011
LMS 1: 1908 GCS shadows traversed, 1076 replayed
Tue Aug 9 04:02:15 2011
LMS 2: 1911 GCS shadows traversed, 1086 replayed
Tue Aug 9 04:02:15 2011
LMS 0: 1899 GCS shadows traversed, 1164 replayed
Tue Aug 9 04:02:15 2011
Submitted all GCS remote-cache requests
Post SMON to start 1st pass IR
Fix write in gcs resources
Reconfiguration complete
Tue Aug 9 04:02:16 2011
ARCH shutting down
ARC2: Archival stopped
Tue Aug 9 04:02:21 2011
Redo thread 2 internally enabled
Tue Aug 9 04:02:35 2011
Reconfiguration started (old inc 4, new inc 6)
List of nodes:
0
Global Resource Directory frozen
* dead instance detected - domain 0 invalid = TRUE
Communication channels reestablished
Master broadcasted resource hash value bitmaps
Non-local Process blocks cleaned out
Tue Aug 9 04:02:35 2011
LMS 1: 0 GCS shadows cancelled, 0 closed
Tue Aug 9 04:02:35 2011
LMS 2: 0 GCS shadows cancelled, 0 closed
Tue Aug 9 04:02:35 2011
LMS 0: 0 GCS shadows cancelled, 0 closed
Set master node info
Submitted all remote-enqueue requests
Dwn-cvts replayed, VALBLKs dubious
All grantable enqueues granted
Post SMON to start 1st pass IR
Tue Aug 9 04:02:35 2011
Instance recovery: looking for dead threads
Tue Aug 9 04:02:35 2011
Beginning instance recovery of 1 threads
Tue Aug 9 04:02:35 2011
LMS 1: 1908 GCS shadows traversed, 0 replayed
Tue Aug 9 04:02:35 2011
LMS 2: 1907 GCS shadows traversed, 0 replayed
Tue Aug 9 04:02:35 2011
LMS 0: 1899 GCS shadows traversed, 0 replayed
Tue Aug 9 04:02:35 2011
Submitted all GCS remote-cache requests
Fix write in gcs resources
Reconfiguration complete
Tue Aug 9 04:02:37 2011
parallel recovery started with 11 processes
Tue Aug 9 04:02:37 2011
Started redo application at
Thread 2: logseq 6, block 2, scn 1837672332
Tue Aug 9 04:02:37 2011
Errors in file /u01/app/oracle/product/10.2.0/db/admin/BAF/bdump/baf1_smon_10253.trc:
ORA-00600: internal error code, arguments: [kcratr2_onepass], [], [], [], [], [], [], []
Tue Aug 9 04:02:38 2011
Errors in file /u01/app/oracle/product/10.2.0/db/admin/BAF/bdump/baf1_smon_10253.trc:
ORA-00600: internal error code, arguments: [kcratr2_onepass], [], [], [], [], [], [], []
Tue Aug 9 04:02:38 2011
Errors in file /u01/app/oracle/product/10.2.0/db/admin/BAF/bdump/baf1_smon_10253.trc:
ORA-00600: internal error code, arguments: [kcratr2_onepass], [], [], [], [], [], [], []
SMON: terminating instance due to error 600
Tue Aug 9 04:02:38 2011
Dump system state for local instance only
System State dumped to trace file /u01/app/oracle/product/10.2.0/db/admin/BAF/bdump/baf1_diag_10229.trc
Tue Aug 9 04:02:38 2011
Instance terminated by SMON, pid = 10253
Tue Aug 9 04:04:09 2011
Starting ORACLE instance (normal)
LICENSE_MAX_SESSION = 0
LICENSE_SESSIONS_WARNING = 0
Interface type 1 lan3 192.168.1.0 configured from OCR for use as a cluster interconnect
Interface type 1 lan2 172.20.21.0 configured from OCR for use as a public interface
Picked latch-free SCN scheme 3
Autotune of undo retention is turned off.
LICENSE_MAX_USERS = 0
SYS auditing is disabled
ksdpec: called for event 13740 prior to event group initialization
Starting up ORACLE RDBMS Version: 10.2.0.4.0.
System parameters with non-default values:
processes = 300
sessions = 335
timed_statistics = TRUE
Kindly help me to get rid out of this issue. Waiting for the quick and helpful response from the gurus in the forum. Thanks in advance.
Regards,

if above were really 100% correct, you would not be here posting about errors!Definitely but these situations could become the cause for new BUGS, isn't it?
I don't know what is real & what is unnecessary obfuscation.What part of the thread you didn't understand.
It is not a good idea to have subtraction sign/dash character as part of object/host name; i.e. "Node-1"."Node-1" is not the hostname it is just to make clear understanding. the hostname is "sdupn101" for node-1 and "sdupn102" for node-2.
ORA-00600/ORA-07445/ORA-03113 = Oracle bug => search on Metalink and/or call Oracle supportNewbie is my status on this forum but I have little bit ethics of using forums and suppot blogs. I searched but unfortunately didn't find any matching solution.
Anyway will update you once find any solution so that you can assist someone else in future.

Similar Messages

  • RAC abnormal shutdown

    Hello All,
    We are facing an unusual scenario.
    We are having a 3 nodes RAC on Oracle 10.2.0.2.0. 2 node were shutdown abnormally. Can you please help in finding the rootcause of the problem?
    All the services has to be manually started
    Find below the messages in Background Trace Files :
    Thu Dec 02 10:38:36 2010
    Global Resource Directory frozen
    * dead instance detected - domain 0 invalid = TRUE
    Communication channels reestablished
    * domain 0 not valid according to instance 2
    Thu Dec 02 10:38:36 2010
    Master broadcasted resource hash value bitmaps
    Non-local Process blocks cleaned out
    Thu Dec 02 10:38:36 2010
    LMS 1: 63 GCS shadows cancelled, 2 closed
    Thu Dec 02 10:38:36 2010
    LMS 0: 61 GCS shadows cancelled, 1 closed
    Set master node info
    Submitted all remote-enqueue requests
    Dwn-cvts replayed, VALBLKs dubious
    All grantable enqueues granted
    Post SMON to start 1st pass IR
    Thu Dec 02 10:38:38 2010
    Instance recovery: looking for dead threads
    Thu Dec 02 10:38:38 2010
    LMS 1: 23117 GCS shadows traversed, 4001 replayed
    Thu Dec 02 10:38:38 2010
    LMS 0: 23361 GCS shadows traversed, 4001 replayed
    LMS 0: 23052 GCS shadows traversed, 4001 replayed
    Thu Dec 02 10:38:39 2010
    LMS 1: 23922 GCS shadows traversed, 4001 replayed
    Thu Dec 02 10:38:39 2010
    LMS 0: 23388 GCS shadows traversed, 4001 replayed
    Thu Dec 02 10:38:39 2010
    LMS 1: 23088 GCS shadows traversed, 4001 replayed
    LMS 1: 23268 GCS shadows traversed, 4001 replayed
    LMS 1: 23621 GCS shadows traversed, 4001 replayed
    LMS 1: 22885 GCS shadows traversed, 4001 replayed
    LMS 1: 23061 GCS shadows traversed, 4001 replayed
    LMS 1: 23046 GCS shadows traversed, 4001 replayed
    LMS 1: 24090 GCS shadows traversed, 4001 replayed
    LMS 1: 23329 GCS shadows traversed, 4001 replayed
    Thu Dec 02 10:38:39 2010
    Beginning instance recovery of 1 threads

    user3601721 wrote:
    We are having a 3 nodes RAC on Oracle 10.2.0.2.0. 2 node were shutdown abnormally. Can you please help in finding the rootcause of the problem? This requires more that a snippet of part of the alert log of a single instance.
    Why was the instances shutdown? Did they shutdown themselves, or were they simply killed? What does the kernel log say? What do the CRS and CSS logs say? Were there issues with the storage layer (what do you use as cluster storage layer)? Were there issues with the Interconnect (what do you use for the Interconnect)? Is ASM used? Etc. etc.
    Why the manual start-up? Did this include restarting CRS or just the RAC instances? Or were the servers rebooted? What did the manual start-up entail?

  • Multi-table INSERT with PARALLEL hint on 2 node RAC

    Multi-table INSERT statement with parallelism set to 5, works fine and spawns multiple parallel
    servers to execute. Its just that it sticks on to only one instance of a 2 node RAC. The code I
    used is what is given below.
    create table t1 ( x int );
    create table t2 ( x int );
    insert /*+ APPEND parallel(t1,5) parallel (t2,5) */
    when (dummy='X') then into t1(x) values (y)
    when (dummy='Y') then into t2(x) values (y)
    select dummy, 1 y from dual;
    I can see multiple sessions using the below query, but on only one instance only. This happens not
    only for the above statement but also for a statement where real time table(as in table with more
    than 20 million records) are used.
    select p.server_name,ps.sid,ps.qcsid,ps.inst_id,ps.qcinst_id,degree,req_degree,
    sql.sql_text
    from Gv$px_process p, Gv$sql sql, Gv$session s , gv$px_session ps
    WHERE p.sid = s.sid
    and p.serial# = s.serial#
    and p.sid = ps.sid
    and p.serial# = ps.serial#
    and s.sql_address = sql.address
    and s.sql_hash_value = sql.hash_value
    and qcsid=945
    Won't parallel servers be spawned across instances for multi-table insert with parallelism on RAC?
    Thanks,
    Mahesh

    Please take a look at these 2 articles below
    http://christianbilien.wordpress.com/2007/09/12/strategies-for-rac-inter-instance-parallelized-queries-part-12/
    http://christianbilien.wordpress.com/2007/09/14/strategies-for-parallelized-queries-across-rac-instances-part-22/
    thanks
    http://swervedba.wordpress.com

  • Multiple copies of same database on a 2 node RAC server - How to merge ?

    I currently have multiple copies of the same database running on a 2 node Rac system. I am looking for a way to combine them into 1 large database but keeping the data separate.
    The databases are copies of production for testing, development and a yearly "historical" databases .
    All the databases are created from production, and generally have the same schema's , tables, procedures, etc however may be different versions and need to be.
    Is There a way to use one large database and logically split all the different versions of the same objects into their own space in one database ? The structure cannot change as the database is for a 3rd party's Forms application the relies on the objects not changing names etc.
    Ideally I am looking for a solution that will allow the forms application to connect to "test" and "historical" copies of our production database separately in the same database container.
    Thanks for any direction.

    I currently have multiple copies of the same database running on a 2 node Rac system. I am looking for a way to combine them into 1 large database but keeping the data separate.
    The databases are copies of production for testing, development and a yearly "historical" databases .
    All the databases are created from production, and generally have the same schema's , tables, procedures, etc however may be different versions and need to be.
    Is There a way to use one large database and logically split all the different versions of the same objects into their own space in one database ? The structure cannot change as the database is for a 3rd party's Forms application the relies on the objects not changing names etc.
    Ideally I am looking for a solution that will allow the forms application to connect to "test" and "historical" copies of our production database separately in the same database container.
    Thanks for any direction.

  • Multiple databases/instances on 4-node RAC Cluster including Physical Stand

    OS: Windows 2003 Server R2 X64
    DB: 10.2.0.4
    Virtualization: NONE
    Node Configuration: x64 architecture - 4-Socket Quad-Core (16 CPUs)
    Node Memory: 128GB RAM
    We are planning the following on the above-mentioned 4-node RAC cluster:
    Node 1: DB1 with instanceDB11 (Active-Active: Load-balancing & Failover)
    Node 2: DB1 with instanceDB12 (Active-Active: Load-balancing & Failover)
    Node 3: DB1 with instanceDB13 (Active-Passive: Failover only) + DB2 with instanceDB21 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB31 (Active-Active: Load-balancing & Failover) + DB4 with instance41 (Active-Active: Load-balancing & Failover)
    Node 4: DB1 with instanceDB14 (Active-Passive: Failover only) + DB2 with instanceDB22 (Active-Active: Load-balancing & Failover) + DB3 with instanceDB32 (Active-Active: Load-balancing & Failover) + DB4 with instance42 (Active-Active: Load-balancing & Failover)
    Note: DB1 will be the physical primary PROD OLTP database and will be open in READ-WRITE mode 24x7x365.
    Note: DB2 will be a Physical Standby of DB1 and will be open in Read-Only mode for reporting purposes during the day-time, except for 3 hours at night when it will apply the logs.
    Note: DB3 will be a Physical Standby of a remote database DB4 (not part of this cluster) and will be mounted in Managed Recovery mode for automatic failover/switchover purposes.
    Note: DB4 will be the physical primary Data Warehouse DB.
    Note: Going to 11g is NOT an option.
    Note: Data Guard broker will be used across the board.
    Please answer/advise of the following:
    1. Is the above configuration supported and why so? If not, what are the alternatives?
    2. Is the above configuration recommended and why so? If not, what are the recommended alternatives?

    Hi,
    As far as i understand, there's nothing wrong in configuration except you need to consider below points while implementing final design.
    1. No of CPU on each servers
    2. Memory on each servers
    3. If you've RAC physical standby then apply(MRP0) will run on only one instance.
    4. Since you are configuring physical standby for on 3rd and 4th nodes of DB1 4 node cluster where DB13 and DB14 instances are used only for failver, if you've a disaster at data center or power failure in entire data center, you are losing both primary and secondary with an assumption that your primary and physical standby reside in same data center so it may not be highly available architecture. If you are going to use extended RAC for this configuration then it makes sense where Node 1 and Node 2 will reside in Datacenter A and Node 3 ,4 will reside in Datacenter B.
    Thanks,
    Keyur

  • How to create 11.2.0.2 physical standby database from 2 node RAC (11.2.0.2)

    Hi,
    Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
    DB : 11.2.0.2
    OS : RHEL5
    RMAN duplicate is causing problem with network and we decided to go for manual creation of the same.
    Thanks in Advance..

    Hi;
    Can any one please help me How to manually create 11.2.0.2 standalone physical standby database from 2 node RAC (11.2.0.2) database which is running in RHEL5 and ASM plugged in.
    DB : 11.2.0.2
    OS : RHEL5I had similar issue, what i did
    1. Used source oracle_home on standby server
    2. Created new asm instance and use same naming
    3. I took RMAN full backup on source and move it to target
    4. I edit initora file remove RAC setting and restore db(also edited listener file)
    Regard
    Helios

  • ORACLE 10G 2 Node RAC on servers AB to 3 node 11GR2 RAC on  new servers XYZ

    Hi Gurus ,
    We have a business requirement to upgrade existing oracle 10.2.0.4 2 Node RAC on servers A,B (HP UX 11.31 ) to 3 Node ORACLE 11GR2 on new Servers X,Y and Z(Linux and servers are from different vendor)
    We don't have ASM.We have RAW file system
    Now this has to be done with near zero down time.This is a very busy OLTP System.Golden Gate is not an option as Management is not going for it this time.
    Storage is same for everything.I am thinking of the following ways.Please let me know if you have any better plan or if you want to correct my existing plan
    Initially i thought of this way and i immediately answered myself
    Plan A
    1 ) Storage copy (BC etc..) exising 10g RAC Database files on A,B to new volumes allocated to Servers X,Y and Z ( I don't think it's possible as OS is different.I am not sure whether copying this way is possible or not , even if possible i am not sure whether new OS can identify these files or not)
    2 ) upgrade 2 Node 10.2.0.4 on X,Y to 11GR2 .
    3 ) Add a Database Node on Z
    Plan B is
    1) Build 3 Node brand new 11GR2 on X,Y and Z
    2 ) Plan for how can you replicate the data ( This has to be a logical way)
    a ) RMAN - Very time consuming as this is >50 TB Database
    b) Golden Gate - Not an option.Even if we can use it , i see there are so many logical issues with golden gate
    c) Expdp/impdp - forget about it :)
    d) physical standby (Versions are different.If it is same version and Same OS then would have been best bet)
    What would be the ideal way to do this with minium down time and with out golden gate
    I think something can be done on the lines of PLAN A itself.
    Requesting your help Gurus
    Thanks

    Hi,
    Have you considered possibility to setup a logical standby and do rolling upgrade ?
    Please have a look at the following:
    1) http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-transientlogicalrollingu-1-131927.pdf
    2) http://www.oracle.com/technetwork/database/features/availability/maa-wp-11g-upgrades-made-easy-131972.pdf
    If you can practice on test setup, it looks a faster option than the others.
    Regards,
    Ganadeva

  • Converting single instance database(11gr2) supporting EBS 12.1.3 to 2 node RAC on RHEL.

    Hi We are in the process of converting single instance database(11gr2) supporting EBS 12.1.3 to 2 node RAC on RHEL. Which version of RHEL is better? if its 6.x then x?? The oracle document only says RHEL update 6.
    thanks in advance.

    Hi,
    Yes you can use any version but i recommend  you to use 6.2
    Also refer my post for RAC migration in EBS
    Apps DBA Workshop: Using 11gR2 RAC with Oracle Applications R12.1.1
    Hope this helps
    thanks,
    X A H E E R

  • 11gR2- webutil upload file to AS on two nodes RAC?

    Hellow experts plz help with the following issue,
    we are using 11gR2 forms on two node rac,webutil configured on both nodes. upload/download files to AS folder(UP_FILES) using our forms. node 2 is actually replica of node 1(forms,reports,UP_FILES). we are now facing a problem that the form which upload file to AS, only upload that to the node from where it is running say if it is running from node1 then it upload files to folder UP_FILES on that node( as the entry in webutil.cfg file) but we want that UP_FILES folder should be synced with each other on both nodes and a form running whether from node1 or node2 upload the file to both nodes at time.
    How this will be accomplished?
    --------webutil.cfg entry
    transfer.appsrv.read.3=D:\UP_FILES
    transfer.appsrv.write.3=D:\UP_FILES
    -----FORM UPLOAD CODE
          IF :CONTROL.FILE_LOC IS NOT NULL THEN
            acyr3 := :CONTROL.TXTVOUCHERNO||'-'||acyr2 ;
           FILE_RESULT := WEBUTIL_FILE_TRANSFER.CLIENT_TO_AS_WITH_PROGRESS(CLIENTFILE=>:CONTROL.FILE_LOC,
           SERVERFILE =>'D:\UP_FILES\'||acyr3||'.PDF',
          PROGRESSTITLE=>'UPLOAD TO DATABASE IN PROGRESS',
          PROGRESSSUBTITLE=>'PLEASE WAIT' );
          END IF;
    --FORM DOWNLOAD CODE
            FILE_RESULT := WEBUTIL_FILE_TRANSFER.AS_TO_CLIENT_WITH_PROGRESS
                 CLIENTFILE=>'D:\UP_FILES\'||acyr3||'.PDF',
            SERVERFILE =>'D:\UP_FILES\'||acyr3||'.PDF',
          PROGRESSTITLE=>'DOWNLOAD FROM DATABASE IN PROGRESS',
          PROGRESSSUBTITLE=>'PLEASE WAIT'
                 CLIENT_HOST('rundll32.exe url.dll,FileProtocolHandler D:\UP_FILES\'||acyr3||'.PDF');
                 IF FILE_RESULT THEN
      message('File downloaded successfully from the Application Server');
      END IF;

    Well, you're uploading the file to one node, so this is no surprise. What you can do is to store your file on a shared folder (which might be a bit tricky on windows) or synchronize a folder between your nodes. Unfortunately Forms can't access ASM directly (assuming you are using ASM), so you can't store your files directly in ASM where it would be accessible from both nodes.
    cheers

  • How to add a second database along with existing two node RAC environment

    Hi,
    I was wondering if anyone can help me with this.
    My Environment:
    1. Two node RAC Cluster database (11.2.0.2) with ASM running perfectly (Oracle Sid = test-1)
    2. I have installed a second single instance db on node 2 (Oracle Sid = test-2) with NTFS file system for datafiles
    3. Database is up and running, but I am not able to connect it from any client.
    4. I am getting ORA-12514:  TNS:listener does not currently know of service requested in connect descriptor
    5. Database (test2) is registered with grid LISTENER
    5. TNSPING from client machine response is ok
    Am I missing something here, happy to provide more info if requested.
    Thanks,
    PS

    C:\Users\root.test_prod>lsnrctl
    LSNRCTL for 64-bit Windows: Version 11.2.0.2.0 - Production on 23-FEB-2012 11:58:05
    Copyright (c) 1991, 2010, Oracle. All rights reserved.
    Welcome to LSNRCTL, type "help" for information.
    LSNRCTL> status
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
    STATUS of the LISTENER
    Alias LISTENER
    Version TNSLSNR for 64-bit Windows: Version 11.2.0.2.0 - Production
    Start Date 18-FEB-2012 19:51:47
    Uptime 4 days 16 hr. 6 min. 24 sec
    Trace Level off
    Security ON: Local OS Authentication
    SNMP OFF
    Listener Parameter File C:\app\11.2.0\grid\network\admin\listener.ora
    Listener Log File C:\app\11.2.0\grid\log\diag\tnslsnr\IRIS11G-DB-2\listener\alert\log.xml
    Listening Endpoints Summary...
    (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\LISTENERipc)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.202)(PORT=1520)))
    (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=10.30.0.215)(PORT=1520)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+asm2", status READY, has 1 handler(s) for this service...
    Service "test-11gRAC.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Service "irisapps.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Service "test-2" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    Service "test-2XDB" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    The command completed successfully
    LSNRCTL> service
    Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=LISTENER)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
    Instance "+asm2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1322 refused:0 state:ready
    LOCAL SERVER
    Service "test-11gRAC.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1829 refused:0 state:ready
    LOCAL SERVER
    Service "test-11gRXDB.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1022 state:ready
    DISPATCHER <machine: IRIS11G-DB-2, pid: 4496>
    (ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=57695))
    Service "irisapps.test_prod.internal" has 1 instance(s).
    Instance "test-11gr2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:1829 refused:0 state:ready
    LOCAL SERVER
    Service "test-2" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "DEDICATED" established:0 refused:0 state:ready
    LOCAL SERVER
    Service "test-2XDB" has 1 instance(s).
    Instance "test-2", status READY, has 1 handler(s) for this service...
    Handler(s):
    "D000" established:0 refused:0 current:0 max:1022 state:ready
    DISPATCHER <machine: IRIS11G-DB-2, pid: 9340>
    (ADDRESS=(PROTOCOL=tcp)(HOST=IRIS11G-DB-2.test_prod.internal)(PORT=58653))
    The command completed successfully
    LSNRCTL>

  • How to create second database at ASM in 4 node RAC system

    Hi Experts,
    we use 4 nodes RAC (11.0.1) with 10.2.0. 4 database in red hat5.0
    we want to add second database at ASM in RAC system based on manager decision.
    how do I add second database in ASM with exist database?
    Do I need to created new ASM insatnce?
    how to create two new diskgroup? is it under existing ASM instance or new ASM instance?
    how to reset ASM properity to support ( or new) ASM instance and two database?
    Do I need to configure AMS again after added more space into ASM?
    I could not find ducument that add seconf database into ASM in RAC system.
    I want add second database by dbca. any experience for add second database in ASM RAC ?
    Thanks for help!
    JIm

    Hi... I'm in the same situation.
    I need to add a new second database on a RAC installation based on already available ASM instance.
    I'm using 11gR2.
    I read your suggested documentation. Then I typed asmca and analyzed my asm configuration:
    As you can see I have a DISK GROUP NAME with several FREE space.
    !http://img522.yfrog.com/img522/8405/dbca20100203173248.jpg!
    If I select Volumes tab the following is my current configuration:
    !http://img682.yfrog.com/img682/562/dbca20100203173343.jpg!
    Selecting Create button, I can insert some values as you can see:
    !http://img403.yfrog.com/img403/9889/dbca20100203173403.jpg!
    First question:
    Is this the right way to create space for a new database ? Consider that running dbca.. no DISK GROUP NAME is available.
    Second question:
    When I created my first database on this DISK GROUP NAME no volumes were created. Why now I have to do it ? Is this necessary to really separate datafiles coming from different databases ?

  • When we create  one service as preferred on both nodes in  two node RAC

    How to configure listener,tnsnames.ora & listener file When we create one service as preferred on both nodes in two node RAC ... ( I don't need load balancing here but i just want to create service as preferred on both nodes)
    please some one help me in this ..

    Thanks alot Sebastain for your reply..
    I am using 10.2.0.4 version and below tns entry is from my client side tns entry ..
    M4AMPRD_TEST=
    (DESCRIPTION=
    (ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.228) (PORT=1521))
    (ADDRESS= (PROTOCOL=TCP) (HOST=153.88.184.229) (PORT=1521))
    (FAILOVER=ON)
    (CONNECT_DATA=(SERVICE_NAME=M4AMPRD_TEST)
    (FAILOVER_MODE=
    (TYPE=SELECT)
    (METHOD=BASIC)
    (RETRIES=20)
    (DELAY=5)
    service creation: srvctl add service -d M4AMPRD -s M4AMPRD_TEST -r M4AMPRD1,M4AMPRD2
    But when i connect to database usign above service from client some times its working fine and some times its failing please see below log with timings how it is behaving ..
    SQL> set time on
    18:39:46 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
    Connected.
    18:39:48 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Warning: You are no longer connected to ORACLE.
    18:39:52 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
    Connected.
    18:39:53 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
    Connected.
    18:39:55 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
    Connected.
    18:39:57 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
    ERROR:
    ORA-12545: Connect failed because target host or object does not exist
    Warning: You are no longer connected to ORACLE.
    18:39:59 SQL> CONN m4owner/iamm4amdev!@M4AMPRD_TEST
    Connected.
    Thanks for your help in advance
    Anil Vejendla..

  • GLOBAL_NAMES setting in 4 nodes RAC

    Hi Experts,
    I have a 4 nodes RAC with 10.2.0.4 database at red hat 5.1
    I find that global_name is nor enforced as
    NAME VALUE
    global_names FALSE
    For stream, I need to change to true.
    I want to know which default value for global_name at RAC.
    If I change to TRUE and enforce global_nmae. does this changes affects RAC system or some RAC function?
    Thanks for help!
    Jim

    Hello Jim,
    Global_Name will not effect anything at the RAC level. This only effects db link name. you have to have use dbname as DB link.
    As per best practices document and other streams documentation .. Global_Name should be true. I have tested this. i have made this parameter false however i have created db link used by streams is same as database name which satisfies mandate requirement for streams. because i had to create one more database link in another schema in same database and this was only option.
    So in a nutshell.. Global_names enforces dblink name same as dbname. you have a workaround.
    Feel free to give it a go.
    Thanks
    Prashant

  • Processes in v$process that do not exist in v$session (2 node RAC)!

    Hi, all.
    The database is 2 node RAC database (10.2.0.2.0)
    on 32 bit windows 2003 EE SP1.
    Our database is suffering "CKPT hang" from time to time.
    I checked v$process and v$session on both node by the following sql.
    select addr,pid,spid,username, program
    from v$process
    where addr not in (select paddr from v$session)
    ADDR PID SPID USERNAME PROGRAM
    56E2 1 PSEUDO
    56E2 18 3984 SYSTEM ORACLE.EXE (D000)
    56E2 19 4020 SYSTEM ORACLE.EXE (S000)
    56E2 27 3176 SYSTEM ORACLE.EXE (PZ99)
    56E3 39 2296 SYSTEM ORACLE.EXE (PZ97)
    ●select * from v$px_process
    SERVER_NAME STATUS PID SPID SID SERIAL#
    PZ97 AVAILABLE 39 2296
    PZ99 AVAILABLE 27 3176
    ●select * from V$PX_SESSION
    --> no rows
    ●select slave_name,status from v$pq_slave
    SLAVE_NAME STATUS
    PZ97 IDLE
    PZ99 IDLE
    I found the above processes which do not exist in v$session.
    Is this normal??
    Thanks and Regards.

    you see nothing in v$session because there is nothing to see ...
    the Parallel servers are AVAILABLE , ie no session are running parallel executions (as shown in V$PX_SESSION)
    PID is not SID

  • Single instance standby for 2-node RAC

    Hi,
    Oracle Version:11.2.0.1
    Operating system:Linux
    Here i am planing to create single instance standby for my 2-node RAC database.Here i am creating my single instance standby database on 1-node of my 2-node RAC DB.
    1.) Do i need to configure any separate listener for my single instance standby in $ORACLE_HOME/network/admin in ORACLE user or need to change in Grid user login.
    2.) Below is the error when i am duplicating my primary 2-Node RAC to single instance DB. And it is shutting down my auxiliary instance.
    [oracle@rac1 ~]$ rman target / auxiliary sys/racdba123@stand
    Recovery Manager: Release 11.2.0.1.0 - Production on Sun Aug 28 13:32:29 2011
    Copyright (c) 1982, 2009, Oracle and/or its affiliates.  All rights reserved.
    connected to target database: RACDB (DBID=755897741)
    connected to auxiliary database: RACDB (not mounted)
    RMAN> duplicate database racdba to stand
    2> ;
    Starting Duplicate Db at 28-AUG-11
    using target database control file instead of recovery catalog
    allocated channel: ORA_AUX_DISK_1
    channel ORA_AUX_DISK_1: SID=6 device type=DISK
    contents of Memory Script:
       sql clone "create spfile from memory";
    executing Memory Script
    sql statement: create spfile from memory
    contents of Memory Script:
       shutdown clone immediate;
       startup clone nomount;
    executing Memory Script
    Oracle instance shut down
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of Duplicate Db command at 08/28/2011 13:33:55
    RMAN-03015: error occurred in stored script Memory Script
    RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptorAlso find my listener services.
    [oracle@rac1 ~]$ lsnrctl status
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-AUG-2011 10:56:24
    Copyright (c) 1991, 2009, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    STATUS of the LISTENER
    Alias                     LISTENER
    Version                   TNSLSNR for Linux: Version 11.2.0.1.0 - Production
    Start Date                18-AUG-2011 10:35:07
    Uptime                    11 days 0 hr. 21 min. 17 sec
    Trace Level               off
    Security                  ON: Local OS Authentication
    SNMP                      OFF
    Listener Parameter File   /u01/11.2.0/grid/network/admin/listener.ora
    Listener Log File         /u01/app/oracle/diag/tnslsnr/rac1/listener/alert/log.xml
    Listening Endpoints Summary...
      (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=LISTENER)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.8.123)(PORT=1521)))
      (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=192.168.8.127)(PORT=1521)))
    Services Summary...
    Service "+ASM" has 1 instance(s).
      Instance "+ASM1", status READY, has 1 handler(s) for this service...
    Service "RACDB" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
    Service "RACDBXDB" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
    Service "stand" has 2 instance(s).
      Instance "stand", status UNKNOWN, has 1 handler(s) for this service...
      Instance "stand", status BLOCKED, has 1 handler(s) for this service...
    Service "testdb" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
    Service "testdb1" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
    The command completed successfully
    [oracle@rac1 ~]$ lsnrctl services
    LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 29-AUG-2011 10:56:35
    Copyright (c) 1991, 2009, Oracle.  All rights reserved.
    Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
    Services Summary...
    Service "+ASM" has 1 instance(s).
      Instance "+ASM1", status READY, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:0 refused:0 state:ready
             LOCAL SERVER
    Service "RACDB" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:3 refused:0 state:ready
             LOCAL SERVER
    Service "RACDBXDB" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
        Handler(s):
          "D000" established:0 refused:0 current:0 max:1022 state:ready
             DISPATCHER <machine: rac1.qfund.net, pid: 3975>
             (ADDRESS=(PROTOCOL=tcp)(HOST=rac1.qfund.net)(PORT=43731))
    Service "stand" has 2 instance(s).
      Instance "stand", status UNKNOWN, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:0 refused:0
             LOCAL SERVER
      Instance "stand", status BLOCKED, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:669 refused:0 state:ready
             LOCAL SERVER
    Service "testdb" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:3 refused:0 state:ready
             LOCAL SERVER
    Service "testdb1" has 1 instance(s).
      Instance "RACDB1", status READY, has 1 handler(s) for this service...
        Handler(s):
          "DEDICATED" established:3 refused:0 state:ready
             LOCAL SERVER
    The command completed successfully
    [oracle@rac1 ~]$Tnsnames.ora file content.
    RACDB =
      (DESCRIPTION =
        (ADDRESS = (PROTOCOL = TCP)(HOST = racdb-scan.qfund.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVER = DEDICATED)
          (SERVICE_NAME = RACDB)
    #QFUNDRAC =
    stand =
      (DESCRIPTION =
        (ADDRESS_LIST =
          (ADDRESS = (PROTOCOL = TCP)(HOST= racdb-scan.qfund.net)(PORT = 1521))
        (CONNECT_DATA =
          (SERVICE_NAME = stand)
          (UR = A)
      )Please help me how to solve this problem.
    Thanks & Regards,
    Poorna Prasad.S

    Hi,
    Please find the output from v$dataguard_status from primary and standby
    Primary
    SQL> select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARCH: LGWR is scheduled to archive destination LOG_ARCHIVE_DEST_2 after log swit
    ch
    ARCH: Beginning to archive thread 1 sequence 214 (4604093-4604095)
    Error 12514 received logging on to the standby
    ARCH: Error 12514 Creating archive log file to 'stand'
    ARCH: Completed archiving thread 1 sequence 214 (4604093-4604095)
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    MESSAGE
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    MESSAGE
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    MESSAGE
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARC1: Becoming the 'no FAL' ARCH
    ARC1: Becoming the 'no SRL' ARCH
    ARC2: Becoming the heartbeat ARCH
    ARC7: Beginning to archive thread 1 sequence 215 (4604095-4604191)
    ARC7: Completed archiving thread 1 sequence 215 (4604095-4604191)
    ARC5: Beginning to archive thread 1 sequence 216 (4604191-4604471)
    ARC5: Completed archiving thread 1 sequence 216 (4604191-4604471)
    ARCt: Archival started
    MESSAGE
    ARC3: Beginning to archive thread 1 sequence 217 (4604471-4605358)
    ARC3: Completed archiving thread 1 sequence 217 (4604471-4605358)
    LNS: Standby redo logfile selected for thread 1 sequence 217 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 217
    LNS: Completed archiving log 1 thread 1 sequence 217
    LNS: Standby redo logfile selected for thread 1 sequence 218 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 218
    MESSAGE
    LNS: Completed archiving log 2 thread 1 sequence 218
    ARC4: Beginning to archive thread 1 sequence 218 (4605358-4625984)
    ARC4: Completed archiving thread 1 sequence 218 (4605358-4625984)
    LNS: Standby redo logfile selected for thread 1 sequence 219 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 219
    LNS: Completed archiving log 1 thread 1 sequence 219
    ARC5: Beginning to archive thread 1 sequence 219 (4625984-4641358)
    ARC5: Completed archiving thread 1 sequence 219 (4625984-4641358)
    LNS: Standby redo logfile selected for thread 1 sequence 220 for destination LOG
    MESSAGE
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 220
    LNS: Completed archiving log 2 thread 1 sequence 220
    ARC6: Beginning to archive thread 1 sequence 220 (4641358-4644757)
    ARC6: Completed archiving thread 1 sequence 220 (4641358-4644757)
    LNS: Standby redo logfile selected for thread 1 sequence 221 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 221
    LNS: Completed archiving log 1 thread 1 sequence 221
    MESSAGE
    ARC7: Beginning to archive thread 1 sequence 221 (4644757-4648306)
    ARC7: Completed archiving thread 1 sequence 221 (4644757-4648306)
    LNS: Standby redo logfile selected for thread 1 sequence 222 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 222
    LNS: Completed archiving log 2 thread 1 sequence 222
    ARC8: Beginning to archive thread 1 sequence 222 (4648306-4655287)
    ARC8: Completed archiving thread 1 sequence 222 (4648306-4655287)
    LNS: Standby redo logfile selected for thread 1 sequence 223 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 1 thread 1 sequence 223
    LNS: Completed archiving log 1 thread 1 sequence 223
    ARC9: Beginning to archive thread 1 sequence 223 (4655287-4655307)
    ARC9: Completed archiving thread 1 sequence 223 (4655287-4655307)
    LNS: Standby redo logfile selected for thread 1 sequence 224 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 224
    LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
    LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    MESSAGE
    Error 3135 for archive log file 2 to 'stand'
    LNS: Failed to archive log 2 thread 1 sequence 224 (3135)
    ARC3: Beginning to archive thread 1 sequence 224 (4655307-4660812)
    ARC3: Completed archiving thread 1 sequence 224 (4655307-4660812)
    LNS: Standby redo logfile selected for thread 1 sequence 224 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 224
    LNS: Completed archiving log 2 thread 1 sequence 224
    LNS: Standby redo logfile selected for thread 1 sequence 225 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 1 thread 1 sequence 225
    LNS: Completed archiving log 1 thread 1 sequence 225
    ARC4: Beginning to archive thread 1 sequence 225 (4660812-4660959)
    ARC4: Completed archiving thread 1 sequence 225 (4660812-4660959)
    LNS: Standby redo logfile selected for thread 1 sequence 226 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 226
    LNS: Completed archiving log 2 thread 1 sequence 226
    ARC5: Beginning to archive thread 1 sequence 226 (4660959-4664925)
    MESSAGE
    LNS: Standby redo logfile selected for thread 1 sequence 227 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 227
    ARC5: Completed archiving thread 1 sequence 226 (4660959-4664925)
    LNS: Completed archiving log 1 thread 1 sequence 227
    LGWR: Error 1089 closing archivelog file 'stand'
    ARC6: Beginning to archive thread 1 sequence 227 (4664925-4668448)
    ARC6: Completed archiving thread 1 sequence 227 (4664925-4668448)
    ARC5: Beginning to archive thread 1 sequence 228 (4668448-4670392)
    ARC5: Completed archiving thread 1 sequence 228 (4668448-4670392)
    MESSAGE
    LNS: Standby redo logfile selected for thread 1 sequence 228 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 228
    LNS: Completed archiving log 2 thread 1 sequence 228
    ARC4: Standby redo logfile selected for thread 1 sequence 227 for destination LO
    G_ARCHIVE_DEST_2
    LNS: Standby redo logfile selected for thread 1 sequence 229 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 1 thread 1 sequence 229
    LNS: Completed archiving log 1 thread 1 sequence 229
    ARC3: Beginning to archive thread 1 sequence 229 (4670392-4670659)
    ARC3: Completed archiving thread 1 sequence 229 (4670392-4670659)
    LNS: Standby redo logfile selected for thread 1 sequence 230 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 230
    LNS: Completed archiving log 2 thread 1 sequence 230
    ARC4: Beginning to archive thread 1 sequence 230 (4670659-4670679)
    ARC4: Completed archiving thread 1 sequence 230 (4670659-4670679)
    MESSAGE
    LNS: Standby redo logfile selected for thread 1 sequence 231 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 231
    LNS: Completed archiving log 1 thread 1 sequence 231
    ARC5: Beginning to archive thread 1 sequence 231 (4670679-4690371)
    ARC5: Completed archiving thread 1 sequence 231 (4670679-4690371)
    LNS: Standby redo logfile selected for thread 1 sequence 232 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 232
    MESSAGE
    LNS: Completed archiving log 2 thread 1 sequence 232
    ARC6: Beginning to archive thread 1 sequence 232 (4690371-4712566)
    ARC6: Completed archiving thread 1 sequence 232 (4690371-4712566)
    LNS: Standby redo logfile selected for thread 1 sequence 233 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 233
    LNS: Completed archiving log 1 thread 1 sequence 233
    ARC7: Beginning to archive thread 1 sequence 233 (4712566-4731626)
    LNS: Standby redo logfile selected for thread 1 sequence 234 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 2 thread 1 sequence 234
    ARC7: Completed archiving thread 1 sequence 233 (4712566-4731626)
    LNS: Completed archiving log 2 thread 1 sequence 234
    ARC8: Beginning to archive thread 1 sequence 234 (4731626-4753780)
    LNS: Standby redo logfile selected for thread 1 sequence 235 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 235
    ARC8: Completed archiving thread 1 sequence 234 (4731626-4753780)
    LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
    MESSAGE
    LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    Error 3135 for archive log file 1 to 'stand'
    LNS: Failed to archive log 1 thread 1 sequence 235 (3135)
    ARC9: Beginning to archive thread 1 sequence 235 (4753780-4765626)
    ARC9: Completed archiving thread 1 sequence 235 (4753780-4765626)
    LNS: Standby redo logfile selected for thread 1 sequence 235 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 235
    LNS: Completed archiving log 1 thread 1 sequence 235
    LNS: Standby redo logfile selected for thread 1 sequence 236 for destination LOG
    MESSAGE
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 236
    LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
    LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    Error 3135 for archive log file 2 to 'stand'
    LNS: Failed to archive log 2 thread 1 sequence 236 (3135)
    ARCa: Beginning to archive thread 1 sequence 236 (4765626-4768914)
    ARCa: Completed archiving thread 1 sequence 236 (4765626-4768914)
    LNS: Standby redo logfile selected for thread 1 sequence 236 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 2 thread 1 sequence 236
    LNS: Completed archiving log 2 thread 1 sequence 236
    LNS: Standby redo logfile selected for thread 1 sequence 237 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 237
    LNS: Completed archiving log 1 thread 1 sequence 237
    ARCb: Beginning to archive thread 1 sequence 237 (4768914-4770603)
    ARCb: Completed archiving thread 1 sequence 237 (4768914-4770603)
    LNS: Standby redo logfile selected for thread 1 sequence 238 for destination LOG
    MESSAGE
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 238
    LNS: Completed archiving log 2 thread 1 sequence 238
    ARCc: Beginning to archive thread 1 sequence 238 (4770603-4770651)
    ARCc: Completed archiving thread 1 sequence 238 (4770603-4770651)
    LNS: Standby redo logfile selected for thread 1 sequence 239 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 239
    LNS: Completed archiving log 1 thread 1 sequence 239
    MESSAGE
    ARCd: Beginning to archive thread 1 sequence 239 (4770651-4773918)
    ARCd: Completed archiving thread 1 sequence 239 (4770651-4773918)
    LNS: Standby redo logfile selected for thread 1 sequence 240 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 240
    LNS: Completed archiving log 2 thread 1 sequence 240
    ARCe: Beginning to archive thread 1 sequence 240 (4773918-4773976)
    ARCe: Completed archiving thread 1 sequence 240 (4773918-4773976)
    LNS: Standby redo logfile selected for thread 1 sequence 241 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 1 thread 1 sequence 241
    LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
    LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    Error 3135 for archive log file 1 to 'stand'
    LNS: Failed to archive log 1 thread 1 sequence 241 (3135)
    ARC3: Beginning to archive thread 1 sequence 241 (4773976-4774673)
    ARC3: Completed archiving thread 1 sequence 241 (4773976-4774673)
    LNS: Standby redo logfile selected for thread 1 sequence 241 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 1 thread 1 sequence 241
    LNS: Completed archiving log 1 thread 1 sequence 241
    LNS: Standby redo logfile selected for thread 1 sequence 242 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 242
    LNS: Completed archiving log 2 thread 1 sequence 242
    ARC4: Beginning to archive thread 1 sequence 242 (4774673-4776045)
    ARC4: Completed archiving thread 1 sequence 242 (4774673-4776045)
    LNS: Standby redo logfile selected for thread 1 sequence 243 for destination LOG
    _ARCHIVE_DEST_2
    MESSAGE
    LNS: Beginning to archive log 1 thread 1 sequence 243
    LNS: Completed archiving log 1 thread 1 sequence 243
    ARC5: Beginning to archive thread 1 sequence 243 (4776045-4776508)
    ARC5: Completed archiving thread 1 sequence 243 (4776045-4776508)
    LNS: Standby redo logfile selected for thread 1 sequence 244 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 244
    LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
    LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    MESSAGE
    Error 3135 for archive log file 2 to 'stand'
    LNS: Failed to archive log 2 thread 1 sequence 244 (3135)
    ARC6: Beginning to archive thread 1 sequence 244 (4776508-4778741)
    ARC6: Completed archiving thread 1 sequence 244 (4776508-4778741)
    ARC7: Beginning to archive thread 1 sequence 245 (4778741-4778781)
    ARC7: Completed archiving thread 1 sequence 245 (4778741-4778781)
    ARC8: Beginning to archive thread 1 sequence 246 (4778781-4778787)
    ARC8: Completed archiving thread 1 sequence 246 (4778781-4778787)
    ARC9: Standby redo logfile selected for thread 1 sequence 244 for destination LO
    G_ARCHIVE_DEST_2
    MESSAGE
    ARC3: Beginning to archive thread 1 sequence 247 (4778787-4778934)
    LNS: Standby redo logfile selected for thread 1 sequence 247 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 247
    ARC3: Completed archiving thread 1 sequence 247 (4778787-4778934)
    LNS: Completed archiving log 1 thread 1 sequence 247
    LNS: Standby redo logfile selected for thread 1 sequence 248 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 248
    MESSAGE
    ARC4: Beginning to archive thread 1 sequence 248 (4778934-4781018)
    LNS: Completed archiving log 2 thread 1 sequence 248
    ARC4: Completed archiving thread 1 sequence 248 (4778934-4781018)
    LNS: Standby redo logfile selected for thread 1 sequence 249 for destination LOG
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 1 thread 1 sequence 249
    LNS: Completed archiving log 1 thread 1 sequence 249
    ARC5: Beginning to archive thread 1 sequence 249 (4781018-4781033)
    ARC5: Completed archiving thread 1 sequence 249 (4781018-4781033)
    LNS: Standby redo logfile selected for thread 1 sequence 250 for destination LOG
    MESSAGE
    _ARCHIVE_DEST_2
    LNS: Beginning to archive log 2 thread 1 sequence 250
    233 rows selected.
    SQL>Standby
    SQL> select message from v$dataguard_status;
    MESSAGE
    ARC0: Archival started
    ARC1: Archival started
    ARC2: Archival started
    ARC3: Archival started
    ARC4: Archival started
    ARC5: Archival started
    ARC6: Archival started
    ARC7: Archival started
    ARC8: Archival started
    ARC9: Archival started
    ARCa: Archival started
    MESSAGE
    ARCb: Archival started
    ARCc: Archival started
    ARCd: Archival started
    ARCe: Archival started
    ARCf: Archival started
    ARCg: Archival started
    ARCh: Archival started
    ARCi: Archival started
    ARCj: Archival started
    ARCk: Archival started
    ARCl: Archival started
    MESSAGE
    ARCm: Archival started
    ARCn: Archival started
    ARCo: Archival started
    ARCp: Archival started
    ARCq: Archival started
    ARCr: Archival started
    ARCs: Archival started
    ARC1: Becoming the 'no FAL' ARCH
    ARC2: Becoming the heartbeat ARCH
    Error 1017 received logging on to the standby
    FAL[client, ARC2]: Error 16191 connecting to RACDB for fetching gap sequence
    MESSAGE
    ARCt: Archival started
    Attempt to start background Managed Standby Recovery process
    MRP0: Background Managed Standby Recovery process started
    Managed Standby Recovery starting Real Time Apply
    Media Recovery Log /u02/stand/archive/1_119_758280976.arc
    Media Recovery Waiting for thread 2 sequence 183
    RFS[1]: Assigned to RFS process 30110
    RFS[1]: Identified database type as 'physical standby': Client is ARCH pid 25980
    RFS[2]: Assigned to RFS process 30118
    RFS[2]: Identified database type as 'physical standby': Client is ARCH pid 26008
    RFS[3]: Assigned to RFS process 30124
    MESSAGE
    RFS[3]: Identified database type as 'physical standby': Client is ARCH pid 26029
    RFS[4]: Assigned to RFS process 30130
    RFS[4]: Identified database type as 'physical standby': Client is ARCH pid 26021
    ARC4: Beginning to archive thread 1 sequence 244 (4776508-4778741)
    ARC4: Completed archiving thread 1 sequence 244 (0-0)
    RFS[5]: Assigned to RFS process 30144
    RFS[5]: Identified database type as 'physical standby': Client is LGWR ASYNC pid
    26128
    Primary database is in MAXIMUM PERFORMANCE mode
    ARC5: Beginning to archive thread 1 sequence 247 (4778787-4778934)
    MESSAGE
    ARC5: Completed archiving thread 1 sequence 247 (0-0)
    ARC6: Beginning to archive thread 1 sequence 248 (4778934-4781018)
    ARC6: Completed archiving thread 1 sequence 248 (0-0)
    ARC7: Beginning to archive thread 1 sequence 249 (4781018-4781033)
    ARC7: Completed archiving thread 1 sequence 249 (0-0)
    58 rows selected.
    SQL>also find the output for the primary alertlog file.
    Tue Aug 30 10:45:41 2011
    LNS: Attempting destination LOG_ARCHIVE_DEST_2 network reconnect (3135)
    LNS: Destination LOG_ARCHIVE_DEST_2 network reconnect abandoned
    Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
    ORA-03135: connection lost contact
    Error 3135 for archive log file 2 to 'stand'
    Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
    ORA-03135: connection lost contact
    LNS: Failed to archive log 2 thread 1 sequence 244 (3135)
    Errors in file /u01/app/oracle/diag/rdbms/racdb/RACDB1/trace/RACDB1_nsa2_26128.trc:
    ORA-03135: connection lost contact
    Tue Aug 30 10:50:25 2011
    Thread 1 advanced to log sequence 245 (LGWR switch)
      Current log# 1 seq# 245 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
      Current log# 1 seq# 245 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
    Tue Aug 30 10:50:25 2011
    Archived Log entry 612 added for thread 1 sequence 244 ID 0x2d0e0689 dest 1:
    Thread 1 cannot allocate new log, sequence 246
    Checkpoint not complete
      Current log# 1 seq# 245 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
      Current log# 1 seq# 245 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
    Thread 1 advanced to log sequence 246 (LGWR switch)
      Current log# 2 seq# 246 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
      Current log# 2 seq# 246 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
    Tue Aug 30 10:50:27 2011
    Archived Log entry 613 added for thread 1 sequence 245 ID 0x2d0e0689 dest 1:
    Thread 1 cannot allocate new log, sequence 247
    Checkpoint not complete
      Current log# 2 seq# 246 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
      Current log# 2 seq# 246 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
    Thread 1 advanced to log sequence 247 (LGWR switch)
      Current log# 1 seq# 247 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
      Current log# 1 seq# 247 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
    Tue Aug 30 10:50:30 2011
    Archived Log entry 614 added for thread 1 sequence 246 ID 0x2d0e0689 dest 1:
    Tue Aug 30 10:51:37 2011
    ARC9: Standby redo logfile selected for thread 1 sequence 244 for destination LOG_ARCHIVE_DEST_2
    Tue Aug 30 10:51:39 2011
    Thread 1 advanced to log sequence 248 (LGWR switch)
      Current log# 2 seq# 248 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
      Current log# 2 seq# 248 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
    Tue Aug 30 10:51:39 2011
    Archived Log entry 620 added for thread 1 sequence 247 ID 0x2d0e0689 dest 1:
    Tue Aug 30 10:51:39 2011
    LNS: Standby redo logfile selected for thread 1 sequence 247 for destination LOG_ARCHIVE_DEST_2
    LNS: Standby redo logfile selected for thread 1 sequence 248 for destination LOG_ARCHIVE_DEST_2
    Tue Aug 30 11:08:27 2011
    Thread 1 advanced to log sequence 249 (LGWR switch)
      Current log# 1 seq# 249 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
      Current log# 1 seq# 249 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
    Tue Aug 30 11:08:27 2011
    Archived Log entry 622 added for thread 1 sequence 248 ID 0x2d0e0689 dest 1:
    Tue Aug 30 11:08:27 2011
    LNS: Standby redo logfile selected for thread 1 sequence 249 for destination LOG_ARCHIVE_DEST_2
    Thread 1 cannot allocate new log, sequence 250
    Checkpoint not complete
      Current log# 1 seq# 249 mem# 0: +ASM_DATA1/racdb/onlinelog/group_1.268.758280977
      Current log# 1 seq# 249 mem# 1: +ASM_DATA2/racdb/onlinelog/group_1.265.758280979
    Thread 1 advanced to log sequence 250 (LGWR switch)
      Current log# 2 seq# 250 mem# 0: +ASM_DATA1/racdb/onlinelog/group_2.269.758280979
      Current log# 2 seq# 250 mem# 1: +ASM_DATA2/racdb/onlinelog/group_2.266.758280981
    Tue Aug 30 11:08:31 2011
    Archived Log entry 624 added for thread 1 sequence 249 ID 0x2d0e0689 dest 1:
    LNS: Standby redo logfile selected for thread 1 sequence 250 for destination LOG_ARCHIVE_DEST_2Thanks & Regards,
    Poorna Prasad.S

Maybe you are looking for

  • Sync Problems with External HD, iTunes freezes

    I sync all my music without any problems from teh computer's hard drive (HP Notebook ze4805, AMD Athlon 2800, 512KB, 60GB, XP). The photo sync is directed to folder on a Seagate 300GB external hardrive which the computer regognizes and iTunes sees al

  • After Exchange 2007 Migration to Exchange 2010, OAB is erroring

    Hello all,  I migrated from single server Exchange 2007 to single Exchange 2010 2 months ago using a co-existence environment.  The 2007 server is still running, but it's not doing anything but SMTP relay, as I am waiting on Oracle admin to point the

  • Can I replace Processor on my hp mini 110-3012 tu ?

    Can I replace Processor on my hp mini 110-3012 tu ? Replace Better Processor then intel atom 

  • Paging a  large ResultSet in a WD Table

    Hi, Is there any standard way to handle this? Let's have 100 000 records. We have a method getData(startingRow, rowsCount) which can be used for paging. We have a context node for results and a table bound to it. What we need, is 1. to see that there

  • How can I update flash player for mini ipad?

    So I try to go on youtube in the safari and it does not let me, it says I have to update my flash player. I press install and it says Safari cannot read. Then I try google and it's the same thing. I don't know what going on!